From: Frank Wunderlich <[email protected]>
- extcon is no more needed in 5.19 - so drop it
commit 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ")
- dr_mode was changed from host to otg in rk356x.dtsi
commit bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd
operation of usb_host0_xhci in rk356x")
change it back on board level as id-pin on r2pro is not connected
Signed-off-by: Frank Wunderlich <[email protected]>
---
for hostmode to work this fix is needed:
https://patchwork.kernel.org/project/linux-rockchip/patch/[email protected]/
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 5e34bd0b214d..93d383b8be87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -678,7 +678,7 @@ &usb_host0_ohci {
};
&usb_host0_xhci {
- extcon = <&usb2phy0>;
+ dr_mode = "host";
status = "okay";
};
--
2.34.1
On Sun, 21 Aug 2022 14:19:29 +0200, Frank Wunderlich wrote:
> - extcon is no more needed in 5.19 - so drop it
> commit 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ")
> - dr_mode was changed from host to otg in rk356x.dtsi
> commit bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd
> operation of usb_host0_xhci in rk356x")
> change it back on board level as id-pin on r2pro is not connected
Applied, thanks!
[1/1] arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
commit: 388f9f0a7ff84b7890a24499a3a1fea0cad21373
Best regards,
--
Heiko Stuebner <[email protected]>