2023-05-24 09:16:08

by Prashanth K

[permalink] [raw]
Subject: [PATCH] usb: common: usb-conn-gpio: Set last role to unknown before initial detection

Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.

To avoid this, last_role is set to USB_ROLE_UNKNOWN before
performing the initial detection.

Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <[email protected]>
---
drivers/usb/common/usb-conn-gpio.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index e20874c..00af735 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -27,6 +27,8 @@
#define USB_CONN_IRQF \
(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)

+#define USB_ROLE_UNKNOWN -1
+
struct usb_conn_info {
struct device *dev;
struct usb_role_switch *role_sw;
@@ -257,6 +259,9 @@ static int usb_conn_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
device_set_wakeup_capable(&pdev->dev, true);

+ /* Set last role to unknown before performing the initial detection */
+ info->last_role = USB_ROLE_UNKNOWN;
+
/* Perform initial detection */
usb_conn_queue_dwork(info, 0);

--
2.7.4



Subject: Re: [PATCH] usb: common: usb-conn-gpio: Set last role to unknown before initial detection

Il 24/05/23 10:54, Prashanth K ha scritto:
> Currently if we bootup a device without cable connected, then
> usb-conn-gpio won't call set_role() since last_role is same as
> current role. This happens because during probe last_role gets
> initialised to zero.
>
> To avoid this, last_role is set to USB_ROLE_UNKNOWN before
> performing the initial detection.
>
> Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
> Signed-off-by: Prashanth K <[email protected]>
> ---
> drivers/usb/common/usb-conn-gpio.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
> index e20874c..00af735 100644
> --- a/drivers/usb/common/usb-conn-gpio.c
> +++ b/drivers/usb/common/usb-conn-gpio.c
> @@ -27,6 +27,8 @@
> #define USB_CONN_IRQF \
> (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
>
> +#define USB_ROLE_UNKNOWN -1

I would add USB_ROLE_UNKNOWN to `enum usb_role` instead.

enum usb_role {
USB_ROLE_UNKNOWN = -1,
USB_ROLE_NONE,
....
};

Regards,
Angelo

> +
> struct usb_conn_info {
> struct device *dev;
> struct usb_role_switch *role_sw;
> @@ -257,6 +259,9 @@ static int usb_conn_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, info);
> device_set_wakeup_capable(&pdev->dev, true);
>
> + /* Set last role to unknown before performing the initial detection */
> + info->last_role = USB_ROLE_UNKNOWN;
> +
> /* Perform initial detection */
> usb_conn_queue_dwork(info, 0);
>



2023-05-24 14:02:25

by Prashanth K

[permalink] [raw]
Subject: Re: [PATCH] usb: common: usb-conn-gpio: Set last role to unknown before initial detection



On 24-05-23 03:10 pm, AngeloGioacchino Del Regno wrote:
> Il 24/05/23 10:54, Prashanth K ha scritto:
>> Currently if we bootup a device without cable connected, then
>> usb-conn-gpio won't call set_role() since last_role is same as
>> current role. This happens because during probe last_role gets
>> initialised to zero.
>>
>> To avoid this, last_role is set to USB_ROLE_UNKNOWN before
>> performing the initial detection.
>>
>> Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection
>> detection driver")
>> Signed-off-by: Prashanth K <[email protected]>
>> ---
>>   drivers/usb/common/usb-conn-gpio.c | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/usb/common/usb-conn-gpio.c
>> b/drivers/usb/common/usb-conn-gpio.c
>> index e20874c..00af735 100644
>> --- a/drivers/usb/common/usb-conn-gpio.c
>> +++ b/drivers/usb/common/usb-conn-gpio.c
>> @@ -27,6 +27,8 @@
>>   #define USB_CONN_IRQF    \
>>       (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
>> +#define USB_ROLE_UNKNOWN    -1
>
> I would add USB_ROLE_UNKNOWN to `enum usb_role` instead.
>
> enum usb_role {
>     USB_ROLE_UNKNOWN = -1,
>     USB_ROLE_NONE,
>     ....
> };
>
> Regards,
> Angelo

Thanks for the suggestion Agnelo. Will change it in next patch.

Regards,
Prashanth K