Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. As of now TCM addresses are hardcoded in xilinx
remoteproc driver. This binding will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven from the driver.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg and power-domain) are documented in each R5 node.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
---
Changes for v2:
- Add ranges property to r5fss cluster node.
- Use regex "^r5f(@[0-9a-f]+|-[a-f0-9]+)$".
- Drop address/size-cells and ranges from r5f core node.
- Mention "reg" and "reg names" as r5f core node required properties.
- Mention address/size-cells and ranges as r5fss required node properties.
- Modify commit description to remove ranges from R5 node.
- Rename r5f node labels(r5f_0 -> r5f_0_split/lockstep and
r5f_1->r5f_1_split/lockstep)
The inspiration for integrating TCM nodes in R5 nodes is taken from
"5ee79c2ed5bd dt-bindings: remoteproc: Add bindings for R5F subsystem
on TI K3 SoCs".Once the binding is reviewed/accepted will send out
driver changes in follow-up series.
---
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 90 +++++++++++++++++--
1 file changed, 83 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 9f677367dd9f..958044b08e86 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -20,6 +20,17 @@ properties:
compatible:
const: xlnx,zynqmp-r5fss
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
+
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
@@ -37,7 +48,7 @@ properties:
2: single cpu mode
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r5f(@[0-9a-f]+|-[a-f0-9]+)$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -54,8 +65,19 @@ patternProperties:
compatible:
const: xlnx,zynqmp-r5f
+ reg:
+ items:
+ - description: Address and Size of the ATCM internal memory region
+ - description: Address and Size of the BTCM internal memory region
+
+ reg-names:
+ items:
+ - const: atcm
+ - const: btcm
+
power-domains:
- maxItems: 1
+ minItems: 1
+ maxItems: 3
mboxes:
minItems: 1
@@ -102,31 +124,85 @@ patternProperties:
required:
- compatible
- power-domains
+ - reg
+ - reg-names
unevaluatedProperties: false
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
additionalProperties: false
examples:
- |
- remoteproc {
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ //Split mode configuration
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xffe00000 0x10000>, <0x20000 0xffe20000 0x10000>,
+ <0x0 0xffe90000 0x10000>, <0x20000 0xffeb0000 0x10000>;
+
+ r5f_0_split: r5f@ffe00000 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0xffe00000 0x10000>, <0xffe20000 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f_1_split: r5f@ffe90000 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
+ };
+
+ - |
+ //Lockstep configuration
+ remoteproc@ffe00000 {
compatible = "xlnx,zynqmp-r5fss";
xlnx,cluster-mode = <1>;
- r5f-0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xffe00000 0x20000>, <0x20000 0xffe20000 0x20000>;
+
+ r5f_0_lockstep: r5f@ffe00000 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
+ reg = <0xffe00000 0x20000>, <0xffe20000 0x20000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
mbox-names = "tx", "rx";
};
- r5f-1 {
+ r5f_1_lockstep: r5f@ffe90000 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
+ reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_1>;
memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
mbox-names = "tx", "rx";
--
2.25.1
On Wed, Jun 28, 2023 at 12:27:06AM +0530, Radhey Shyam Pandey wrote:
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. As of now TCM addresses are hardcoded in xilinx
> remoteproc driver. This binding will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven from the driver.
>
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
>
> The TCM resources(reg and power-domain) are documented in each R5 node.
> It also extends the examples for TCM split and lockstep modes.
>
> Signed-off-by: Radhey Shyam Pandey <[email protected]>
> ---
> Changes for v2:
> - Add ranges property to r5fss cluster node.
> - Use regex "^r5f(@[0-9a-f]+|-[a-f0-9]+)$".
> - Drop address/size-cells and ranges from r5f core node.
> - Mention "reg" and "reg names" as r5f core node required properties.
> - Mention address/size-cells and ranges as r5fss required node properties.
> - Modify commit description to remove ranges from R5 node.
> - Rename r5f node labels(r5f_0 -> r5f_0_split/lockstep and
> r5f_1->r5f_1_split/lockstep)
>
> The inspiration for integrating TCM nodes in R5 nodes is taken from
> "5ee79c2ed5bd dt-bindings: remoteproc: Add bindings for R5F subsystem
> on TI K3 SoCs".Once the binding is reviewed/accepted will send out
> driver changes in follow-up series.
> ---
> .../remoteproc/xlnx,zynqmp-r5fss.yaml | 90 +++++++++++++++++--
> 1 file changed, 83 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> index 9f677367dd9f..958044b08e86 100644
> --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> @@ -20,6 +20,17 @@ properties:
> compatible:
> const: xlnx,zynqmp-r5fss
>
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + ranges:
> + description: |
> + Standard ranges definition providing address translations for
> + local R5F TCM address spaces to bus addresses.
> +
> xlnx,cluster-mode:
> $ref: /schemas/types.yaml#/definitions/uint32
> enum: [0, 1, 2]
> @@ -37,7 +48,7 @@ properties:
> 2: single cpu mode
>
> patternProperties:
> - "^r5f-[a-f0-9]+$":
> + "^r5f(@[0-9a-f]+|-[a-f0-9]+)$":
If reg is required, then you don't need '-[a-f0-9]+'. Though new
required properties is an ABI change which needs justification.
> type: object
> description: |
> The RPU is located in the Low Power Domain of the Processor Subsystem.
> @@ -54,8 +65,19 @@ patternProperties:
> compatible:
> const: xlnx,zynqmp-r5f
>
> + reg:
> + items:
> + - description: Address and Size of the ATCM internal memory region
> + - description: Address and Size of the BTCM internal memory region
Drop 'Address and Size of '
> +
> + reg-names:
> + items:
> + - const: atcm
> + - const: btcm
> +
> power-domains:
> - maxItems: 1
> + minItems: 1
> + maxItems: 3
>
> mboxes:
> minItems: 1
> @@ -102,31 +124,85 @@ patternProperties:
> required:
> - compatible
> - power-domains
> + - reg
> + - reg-names
>
> unevaluatedProperties: false
>
> required:
> - compatible
> + - "#address-cells"
> + - "#size-cells"
> + - ranges
>
> additionalProperties: false
>
> examples:
> - |
> - remoteproc {
> + #include <dt-bindings/power/xlnx-zynqmp-power.h>
> +
> + //Split mode configuration
> + remoteproc@ffe00000 {
> + compatible = "xlnx,zynqmp-r5fss";
> + xlnx,cluster-mode = <0>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xffe00000 0x10000>, <0x20000 0xffe20000 0x10000>,
> + <0x0 0xffe90000 0x10000>, <0x20000 0xffeb0000 0x10000>;
> +
> + r5f_0_split: r5f@ffe00000 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0xffe00000 0x10000>, <0xffe20000 0x10000>;
> + reg-names = "atcm", "btcm";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>;
> + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> + mbox-names = "tx", "rx";
> + };
> +
> + r5f_1_split: r5f@ffe90000 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
> + reg-names = "atcm", "btcm";
> + power-domains = <&zynqmp_firmware PD_RPU_1>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> + mbox-names = "tx", "rx";
> + };
> + };
> +
> + - |
> + //Lockstep configuration
> + remoteproc@ffe00000 {
> compatible = "xlnx,zynqmp-r5fss";
> xlnx,cluster-mode = <1>;
>
> - r5f-0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xffe00000 0x20000>, <0x20000 0xffe20000 0x20000>;
> +
> + r5f_0_lockstep: r5f@ffe00000 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware 0x7>;
> + reg = <0xffe00000 0x20000>, <0xffe20000 0x20000>;
> + reg-names = "atcm", "btcm";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>;
> memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> mbox-names = "tx", "rx";
> };
>
> - r5f-1 {
> + r5f_1_lockstep: r5f@ffe90000 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware 0x8>;
> + reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
> + reg-names = "atcm", "btcm";
> + power-domains = <&zynqmp_firmware PD_RPU_1>;
> memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> mbox-names = "tx", "rx";
> --
> 2.25.1
>
> -----Original Message-----
> From: Rob Herring <[email protected]>
> Sent: Friday, July 7, 2023 12:32 AM
> To: Pandey, Radhey Shyam <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; Simek, Michal
> <[email protected]>; Levinsky, Ben <[email protected]>; Shah,
> Tanmay <[email protected]>; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]; git (AMD-Xilinx) <[email protected]>
> Subject: Re: [PATCH v2] dt-bindings: remoteproc: add Tightly Coupled
> Memory (TCM) bindings
>
> On Wed, Jun 28, 2023 at 12:27:06AM +0530, Radhey Shyam Pandey wrote:
> > Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> > UltraScale+ platform. As of now TCM addresses are hardcoded in xilinx
> > remoteproc driver. This binding will help in defining TCM in
> > device-tree and make it's access platform agnostic and data-driven from
> the driver.
> >
> > Tightly-coupled memories(TCMs) are low-latency memory that provides
> > predictable instruction execution and predictable data load/store
> > timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB
> > memory banks on the ATCM and BTCM ports, for a total of 128 KB of
> memory.
> >
> > The TCM resources(reg and power-domain) are documented in each R5
> node.
> > It also extends the examples for TCM split and lockstep modes.
> >
> > Signed-off-by: Radhey Shyam Pandey <[email protected]>
> > ---
> > Changes for v2:
> > - Add ranges property to r5fss cluster node.
> > - Use regex "^r5f(@[0-9a-f]+|-[a-f0-9]+)$".
> > - Drop address/size-cells and ranges from r5f core node.
> > - Mention "reg" and "reg names" as r5f core node required properties.
> > - Mention address/size-cells and ranges as r5fss required node properties.
> > - Modify commit description to remove ranges from R5 node.
> > - Rename r5f node labels(r5f_0 -> r5f_0_split/lockstep and
> > r5f_1->r5f_1_split/lockstep)
> >
> > The inspiration for integrating TCM nodes in R5 nodes is taken from
> > "5ee79c2ed5bd dt-bindings: remoteproc: Add bindings for R5F subsystem
> > on TI K3 SoCs".Once the binding is reviewed/accepted will send out
> > driver changes in follow-up series.
> > ---
> > .../remoteproc/xlnx,zynqmp-r5fss.yaml | 90 +++++++++++++++++--
> > 1 file changed, 83 insertions(+), 7 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-
> r5fss.yaml
> > b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-
> r5fss.yaml
> > index 9f677367dd9f..958044b08e86 100644
> > ---
> > a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-
> r5fss.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-
> r5fss.y
> > +++ aml
> > @@ -20,6 +20,17 @@ properties:
> > compatible:
> > const: xlnx,zynqmp-r5fss
> >
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 1
> > +
> > + ranges:
> > + description: |
> > + Standard ranges definition providing address translations for
> > + local R5F TCM address spaces to bus addresses.
> > +
> > xlnx,cluster-mode:
> > $ref: /schemas/types.yaml#/definitions/uint32
> > enum: [0, 1, 2]
> > @@ -37,7 +48,7 @@ properties:
> > 2: single cpu mode
> >
> > patternProperties:
> > - "^r5f-[a-f0-9]+$":
> > + "^r5f(@[0-9a-f]+|-[a-f0-9]+)$":
>
> If reg is required, then you don't need '-[a-f0-9]+'. Though new required
> properties is an ABI change which needs justification.
Some background: remoteproc subsystem is currently supported on zu+
platform and it's TCM addresses are hardcoded in xlnx_r5_remoteproc
driver at path: drivers/remoteproc/xlnx_r5_remoteproc.c
With this binding change i.e making reg/reg-names required
remoteproc driver will still ensure stable ABI and support zu+ old
device trees (without reg/reg-names).
For newer platform (versal) we plan to make reg/reg-names as required
properties and prefer not to have new hardcoded addresses for them
in xlnx_r5_remoteproc driver. Hope that is fine. I can add
this justification to commit description.
>
> > type: object
> > description: |
> > The RPU is located in the Low Power Domain of the Processor
> Subsystem.
> > @@ -54,8 +65,19 @@ patternProperties:
> > compatible:
> > const: xlnx,zynqmp-r5f
> >
> > + reg:
> > + items:
> > + - description: Address and Size of the ATCM internal memory region
> > + - description: Address and Size of the BTCM internal memory
> > + region
>
> Drop 'Address and Size of '
Sure, will fix it in v3.
>
> > +
> > + reg-names:
> > + items:
> > + - const: atcm
> > + - const: btcm
> > +
> > power-domains:
> > - maxItems: 1
> > + minItems: 1
> > + maxItems: 3
> >
> > mboxes:
> > minItems: 1
> > @@ -102,31 +124,85 @@ patternProperties:
> > required:
> > - compatible
> > - power-domains
> > + - reg
> > + - reg-names
> >
> > unevaluatedProperties: false
> >
> > required:
> > - compatible
> > + - "#address-cells"
> > + - "#size-cells"
> > + - ranges
> >
> > additionalProperties: false
> >
> > examples:
> > - |
> > - remoteproc {
> > + #include <dt-bindings/power/xlnx-zynqmp-power.h>
> > +
> > + //Split mode configuration
> > + remoteproc@ffe00000 {
> > + compatible = "xlnx,zynqmp-r5fss";
> > + xlnx,cluster-mode = <0>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xffe00000 0x10000>, <0x20000 0xffe20000 0x10000>,
> > + <0x0 0xffe90000 0x10000>, <0x20000 0xffeb0000
> > + 0x10000>;
> > +
> > + r5f_0_split: r5f@ffe00000 {
> > + compatible = "xlnx,zynqmp-r5f";
> > + reg = <0xffe00000 0x10000>, <0xffe20000 0x10000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_0>,
> > + <&zynqmp_firmware PD_R5_0_ATCM>,
> > + <&zynqmp_firmware PD_R5_0_BTCM>;
> > + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> > + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> > + mbox-names = "tx", "rx";
> > + };
> > +
> > + r5f_1_split: r5f@ffe90000 {
> > + compatible = "xlnx,zynqmp-r5f";
> > + reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_1>,
> > + <&zynqmp_firmware PD_R5_1_ATCM>,
> > + <&zynqmp_firmware PD_R5_1_BTCM>;
> > + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> > + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> > + mbox-names = "tx", "rx";
> > + };
> > + };
> > +
> > + - |
> > + //Lockstep configuration
> > + remoteproc@ffe00000 {
> > compatible = "xlnx,zynqmp-r5fss";
> > xlnx,cluster-mode = <1>;
> >
> > - r5f-0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xffe00000 0x20000>, <0x20000 0xffe20000
> > + 0x20000>;
> > +
> > + r5f_0_lockstep: r5f@ffe00000 {
> > compatible = "xlnx,zynqmp-r5f";
> > - power-domains = <&zynqmp_firmware 0x7>;
> > + reg = <0xffe00000 0x20000>, <0xffe20000 0x20000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_0>,
> > + <&zynqmp_firmware PD_R5_0_ATCM>,
> > + <&zynqmp_firmware PD_R5_0_BTCM>;
> > memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> > mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> > mbox-names = "tx", "rx";
> > };
> >
> > - r5f-1 {
> > + r5f_1_lockstep: r5f@ffe90000 {
> > compatible = "xlnx,zynqmp-r5f";
> > - power-domains = <&zynqmp_firmware 0x8>;
> > + reg = <0xffe90000 0x10000>, <0xffeb0000 0x10000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_1>;
> > memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> > mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> > mbox-names = "tx", "rx";
> > --
> > 2.25.1
> >