2023-09-05 16:19:23

by Varadarajan Narayanan

Subject: [PATCH v2] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks

IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.

Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
drivers/clk/qcom/gcc-ipq5332.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index b02026f..b836159 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -71,7 +71,6 @@ static struct clk_fixed_factor gpll0_div2 = {
&gpll0_main.clkr.hw },
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
},
};

@@ -85,7 +84,6 @@ static struct clk_alpha_pll_postdiv gpll0 = {
&gpll0_main.clkr.hw },
.num_parents = 1,
.ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
},
};

--
2.7.4

2023-09-20 17:18:19

by Bjorn Andersson

Subject: Re: [PATCH v2] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks

On Thu, 31 Aug 2023 14:58:53 +0530, Varadarajan Narayanan wrote:
> IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
> This must not be scaled based on the requirement of
> dependent clocks. Hence remove the CLK_SET_RATE_PARENT
> flag.
>
>

Applied, thanks!

[1/1] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks
commit: ccd8ab030643040600a663edde56b434b6f4fb6c

Best regards,
--
Bjorn Andersson <[email protected]>