Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <[email protected]>
---
v5: do some refactoring as Paolo Abeni <[email protected]> and
Christophe Leroy <[email protected]> suggested
v4: undo all the things done prior to hdlc_open() as
Jakub Kicinski <[email protected]> suggested,
add hdlc_close() call to the uhdlc_close() to match the function comment,
add uhdlc_close() declaration to the top of the file not to put the
uhdlc_close() function definition before uhdlc_open()
v3: Fix the commits tree
v2: Remove the 'rc' variable (stores the return value of the
hdlc_open()) as Christophe Leroy <[email protected]> suggested
drivers/net/wan/fsl_ucc_hdlc.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 47c2ad7a3e42..fd50bb313b92 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -34,6 +34,8 @@
#define TDM_PPPOHT_SLIC_MAXIN
#define RX_BD_ERRORS (R_CD_S | R_OV_S | R_CR_S | R_AB_S | R_NO_S | R_LG_S)
+static int uhdlc_close(struct net_device *dev);
+
static struct ucc_tdm_info utdm_primary_info = {
.uf_info = {
.tsa = 0,
@@ -708,6 +710,7 @@ static int uhdlc_open(struct net_device *dev)
hdlc_device *hdlc = dev_to_hdlc(dev);
struct ucc_hdlc_private *priv = hdlc->priv;
struct ucc_tdm *utdm = priv->utdm;
+ int rc = 0;
if (priv->hdlc_busy != 1) {
if (request_irq(priv->ut_info->uf_info.irq,
@@ -731,10 +734,13 @@ static int uhdlc_open(struct net_device *dev)
napi_enable(&priv->napi);
netdev_reset_queue(dev);
netif_start_queue(dev);
- hdlc_open(dev);
+
+ rc = hdlc_open(dev);
+ if (rc)
+ uhdlc_close(dev);
}
- return 0;
+ return rc;
}
static void uhdlc_memclean(struct ucc_hdlc_private *priv)
@@ -824,6 +830,8 @@ static int uhdlc_close(struct net_device *dev)
netdev_reset_queue(dev);
priv->hdlc_busy = 0;
+ hdlc_close(dev);
+
return 0;
}
--
2.30.2
Le 19/09/2023 à 16:25, Alexandra Diupina a écrit :
> Process the result of hdlc_open() and call uhdlc_close()
> in case of an error. It is necessary to pass the error
> code up the control flow, similar to a possible
> error in request_irq().
> Also add a hdlc_close() call to the uhdlc_close()
> because the comment to hdlc_close() says it must be called
> by the hardware driver when the HDLC device is being closed
>
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
>
> Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
> Signed-off-by: Alexandra Diupina <[email protected]>
Suggested-by: Christophe Leroy <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
> ---
> v5: do some refactoring as Paolo Abeni <[email protected]> and
> Christophe Leroy <[email protected]> suggested
> v4: undo all the things done prior to hdlc_open() as
> Jakub Kicinski <[email protected]> suggested,
> add hdlc_close() call to the uhdlc_close() to match the function comment,
> add uhdlc_close() declaration to the top of the file not to put the
> uhdlc_close() function definition before uhdlc_open()
> v3: Fix the commits tree
> v2: Remove the 'rc' variable (stores the return value of the
> hdlc_open()) as Christophe Leroy <[email protected]> suggested
> drivers/net/wan/fsl_ucc_hdlc.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
> index 47c2ad7a3e42..fd50bb313b92 100644
> --- a/drivers/net/wan/fsl_ucc_hdlc.c
> +++ b/drivers/net/wan/fsl_ucc_hdlc.c
> @@ -34,6 +34,8 @@
> #define TDM_PPPOHT_SLIC_MAXIN
> #define RX_BD_ERRORS (R_CD_S | R_OV_S | R_CR_S | R_AB_S | R_NO_S | R_LG_S)
>
> +static int uhdlc_close(struct net_device *dev);
> +
> static struct ucc_tdm_info utdm_primary_info = {
> .uf_info = {
> .tsa = 0,
> @@ -708,6 +710,7 @@ static int uhdlc_open(struct net_device *dev)
> hdlc_device *hdlc = dev_to_hdlc(dev);
> struct ucc_hdlc_private *priv = hdlc->priv;
> struct ucc_tdm *utdm = priv->utdm;
> + int rc = 0;
>
> if (priv->hdlc_busy != 1) {
> if (request_irq(priv->ut_info->uf_info.irq,
> @@ -731,10 +734,13 @@ static int uhdlc_open(struct net_device *dev)
> napi_enable(&priv->napi);
> netdev_reset_queue(dev);
> netif_start_queue(dev);
> - hdlc_open(dev);
> +
> + rc = hdlc_open(dev);
> + if (rc)
> + uhdlc_close(dev);
> }
>
> - return 0;
> + return rc;
> }
>
> static void uhdlc_memclean(struct ucc_hdlc_private *priv)
> @@ -824,6 +830,8 @@ static int uhdlc_close(struct net_device *dev)
> netdev_reset_queue(dev);
> priv->hdlc_busy = 0;
>
> + hdlc_close(dev);
> +
> return 0;
> }
>
Hello:
This patch was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:
On Tue, 19 Sep 2023 17:25:02 +0300 you wrote:
> Process the result of hdlc_open() and call uhdlc_close()
> in case of an error. It is necessary to pass the error
> code up the control flow, similar to a possible
> error in request_irq().
> Also add a hdlc_close() call to the uhdlc_close()
> because the comment to hdlc_close() says it must be called
> by the hardware driver when the HDLC device is being closed
>
> [...]
Here is the summary with links:
- [v5] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
https://git.kernel.org/netdev/net/c/a59addacf899
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html