DT schema expects panel timings node to follow certain pattern,
dtbs_check warnings:
vt8500-bv07.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
Linux drivers do not care about node name, so this should not have
effect on Linux.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/vt8500/vt8500-bv07.dts | 2 +-
arch/arm/boot/dts/vt8500/wm8505-ref.dts | 2 +-
arch/arm/boot/dts/vt8500/wm8650-mid.dts | 2 +-
arch/arm/boot/dts/vt8500/wm8850-w70v2.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
index e9f55bd30bd4..38a2da5e2c5d 100644
--- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
@@ -16,7 +16,7 @@ &fb {
bits-per-pixel = <16>;
display-timings {
native-mode = <&timing0>;
- timing0: 800x480 {
+ timing0: timing-800x480 {
clock-frequency = <0>; /* unused but required */
hactive = <800>;
vactive = <480>;
diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
index 2d77c087676e..8ce9e2ef0a81 100644
--- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts
+++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
@@ -16,7 +16,7 @@ &fb {
bits-per-pixel = <32>;
display-timings {
native-mode = <&timing0>;
- timing0: 800x480 {
+ timing0: timing-800x480 {
clock-frequency = <0>; /* unused but required */
hactive = <800>;
vactive = <480>;
diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
index f6a42149a0a0..7977b6c1e8eb 100644
--- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts
+++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
@@ -17,7 +17,7 @@ &fb {
display-timings {
native-mode = <&timing0>;
- timing0: 800x480 {
+ timing0: timing-800x480 {
clock-frequency = <0>; /* unused but required */
hactive = <800>;
vactive = <480>;
diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
index c7a6fe0ce48f..5d409323b10c 100644
--- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
@@ -28,7 +28,7 @@ &fb {
bits-per-pixel = <16>;
display-timings {
native-mode = <&timing0>;
- timing0: 800x480 {
+ timing0: timing-800x480 {
clock-frequency = <0>; /* unused but required */
hactive = <800>;
vactive = <480>;
--
2.43.0
On Thu, 09 May 2024 12:47:49 +0200, Krzysztof Kozlowski wrote:
> DT schema expects panel timings node to follow certain pattern,
> dtbs_check warnings:
>
> vt8500-bv07.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
>
> Linux drivers do not care about node name, so this should not have
> effect on Linux.
>
> [...]
Applied, thanks!
[1/1] ARM: dts: vt8500: align panel timings node name with dtschema
https://git.kernel.org/krzk/linux-dt/c/9edd534fc6553d83ac9f208a64d581f5d20214d7
Best regards,
--
Krzysztof Kozlowski <[email protected]>