Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
parent which is actually used is vid_pll_final_div. This should be set
using assigned-clock-parents in the .dts rather than removing some
"unwanted" clock parents from the clock driver.
Suggested-by: Jerome Brunet <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
---
After a hint from Jerome (thanks) this is the improved version of
"clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
[0] https://patchwork.kernel.org/project/linux-clk/patch/[email protected]/
drivers/clk/meson/meson8b.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index a844d35b553a..0f8bd707217a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
.ops = &clk_regmap_mux_ro_ops,
.parent_hws = meson8b_vclk_mux_parent_hws,
.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
@@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
.ops = &clk_regmap_mux_ro_ops,
.parent_hws = meson8b_vclk_mux_parent_hws,
.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
--
2.31.1
On Mon 24 May 2021 at 15:45, Martin Blumenstingl <[email protected]> wrote:
> Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> parent which is actually used is vid_pll_final_div. This should be set
> using assigned-clock-parents in the .dts rather than removing some
> "unwanted" clock parents from the clock driver.
>
> Suggested-by: Jerome Brunet <[email protected]>
> Signed-off-by: Martin Blumenstingl <[email protected]>
> ---
> After a hint from Jerome (thanks) this is the improved version of
> "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
>
>
> [0] https://patchwork.kernel.org/project/linux-clk/patch/[email protected]/
>
>
> drivers/clk/meson/meson8b.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index a844d35b553a..0f8bd707217a 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
> .ops = &clk_regmap_mux_ro_ops,
I just noticed that these muxes are read-only ATM.
It does not make this change (or the previous one) wrong but it does not
make much sense as the mux won't ever change.
I suppose you make this mutable with another patch later on ?
> .parent_hws = meson8b_vclk_mux_parent_hws,
> .num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> - .flags = CLK_SET_RATE_PARENT,
> + .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> },
> };
>
> @@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
> .ops = &clk_regmap_mux_ro_ops,
> .parent_hws = meson8b_vclk_mux_parent_hws,
> .num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> - .flags = CLK_SET_RATE_PARENT,
> + .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> },
> };
Hi Jerome,
On Mon, May 24, 2021 at 4:30 PM Jerome Brunet <[email protected]> wrote:
>
>
> On Mon 24 May 2021 at 15:45, Martin Blumenstingl <[email protected]> wrote:
>
> > Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> > parent which is actually used is vid_pll_final_div. This should be set
> > using assigned-clock-parents in the .dts rather than removing some
> > "unwanted" clock parents from the clock driver.
> >
> > Suggested-by: Jerome Brunet <[email protected]>
> > Signed-off-by: Martin Blumenstingl <[email protected]>
> > ---
> > After a hint from Jerome (thanks) this is the improved version of
> > "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
> >
> >
> > [0] https://patchwork.kernel.org/project/linux-clk/patch/[email protected]/
> >
> >
> > drivers/clk/meson/meson8b.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> > index a844d35b553a..0f8bd707217a 100644
> > --- a/drivers/clk/meson/meson8b.c
> > +++ b/drivers/clk/meson/meson8b.c
> > @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
> > .ops = &clk_regmap_mux_ro_ops,
>
> I just noticed that these muxes are read-only ATM.
> It does not make this change (or the previous one) wrong but it does not
> make much sense as the mux won't ever change.
indeed, as-is the patch is a no-op
> I suppose you make this mutable with another patch later on ?
correct, I have a patch in my queue which will make all relevant
clocks in the vclk and vclk2 trees mutable
my idea behind this is to not mix any _ro_ops to _ops conversion with
other types of changes (so the actual reason for a change is still
documented in the git history)
Best regards,
Martin