-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
[1] Main.c fails to compile on 2.5.9 kernel, during fresh install/rebuild.
[2] Initial call to bzImage on make dies immediately with exit 1
[3] Key Word: MAIN
[4] Version: 2.4.8-34.1mdk #1 Mon Nov 19 12:40:39 MST 2001 i686 unknown
[Duron 700 Mhz]
[5] Error reported : make[1]: Leaving directory
`/usr/src/linux-new/linux-2.5.9'
gcc -D__KERNEL__ -I/usr/src/linux-new/linux-2.5.9/include -Wall
- -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
- -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
- -march=athlon -DKBUILD_BASENAME=main -c -o init/main.o init/main.c
init/main.c:279: redefinition of `setup_per_cpu_areas'
init/main.c:275: `setup_per_cpu_areas' previously defined here
make: *** [init/main.o] Error 1
[6] N/A
[7] Gnome desktop Mandrake 8.2 updates, kernel as above.
[7.1] Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.13
e2fsprogs 1.26
PPP 2.4.1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded sr_mod r128 agpgart ipchains via82cxxx_audio uart401
ac97_codec sound soundcore lp parport_pc parport af_packet keybdev mousedev
hid usbmouse input usb-uhci usbcore 8139too eepro100 nls_cp437 nls_iso8859-1
nls_cp850 vfat fat ide-scsi scsi_mod rtc
[7.2] [root@C242326-a linux-2.5.9]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Duron(tm) Processor
stepping : 0
cpu MHz : 700.040
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1395.91
[7.3] cat /proc/modules
sr_mod 14904 0 (autoclean)
r128 86392 0
agpgart 26752 1 (autoclean)
ipchains 36168 0
via82cxxx_audio 17120 0
uart401 6336 0 [via82cxxx_audio]
ac97_codec 9280 0 [via82cxxx_audio]
sound 58348 0 [via82cxxx_audio uart401]
soundcore 4164 5 [via82cxxx_audio sound]
lp 5760 0
parport_pc 19940 1
parport 24768 1 [lp parport_pc]
af_packet 12552 1 (autoclean)
keybdev 1920 0 (unused)
mousedev 4192 1
hid 18464 0 (unused)
usbmouse 2048 0 (unused)
input 3648 0 [keybdev mousedev hid usbmouse]
usb-uhci 21252 0 (unused)
usbcore 50688 1 [hid usbmouse usb-uhci]
8139too 12672 1 (autoclean)
eepro100 17104 1 (autoclean)
nls_cp437 4384 2 (autoclean)
nls_iso8859-1 2880 3 (autoclean)
nls_cp850 3616 1 (autoclean)
vfat 9980 3 (autoclean)
fat 32152 0 (autoclean) [vfat]
ide-scsi 8096 0
scsi_mod 91080 2 [sr_mod ide-scsi]
rtc 5592 0 (autoclean)
[7.4] cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0778-077a : parport0
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
9000-9fff : PCI Bus #01
9000-90ff : ATI Technologies Inc Rage 128 RF
a000-a00f : VIA Technologies, Inc. Bus Master IDE
a000-a007 : ide0
a008-a00f : ide1
a400-a41f : VIA Technologies, Inc. UHCI USB
a400-a41f : usb-uhci
a800-a81f : VIA Technologies, Inc. UHCI USB (#2)
a800-a81f : usb-uhci
ac00-acff : VIA Technologies, Inc. AC97 Audio Controller
ac00-acff : via82cxxx_audio
b000-b003 : VIA Technologies, Inc. AC97 Audio Controller
b000-b003 : via82cxxx_audio
b400-b403 : VIA Technologies, Inc. AC97 Audio Controller
b400-b403 : via82cxxx_audio
b800-b81f : Intel Corporation 82557 [Ethernet Pro 100]
b800-b81f : eepro100
bc00-bc07 : Lucent Microelectronics 56k WinModem
c000-c0ff : Lucent Microelectronics 56k WinModem
c400-c4ff : Realtek Semiconductor Co., Ltd. RTL-8139
c400-c4ff : 8139too
[root@C242326-a linux-2.5.9]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0778-077a : parport0
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
9000-9fff : PCI Bus #01
9000-90ff : ATI Technologies Inc Rage 128 RF
a000-a00f : VIA Technologies, Inc. Bus Master IDE
a000-a007 : ide0
a008-a00f : ide1
a400-a41f : VIA Technologies, Inc. UHCI USB
a400-a41f : usb-uhci
a800-a81f : VIA Technologies, Inc. UHCI USB (#2)
a800-a81f : usb-uhci
ac00-acff : VIA Technologies, Inc. AC97 Audio Controller
ac00-acff : via82cxxx_audio
b000-b003 : VIA Technologies, Inc. AC97 Audio Controller
b000-b003 : via82cxxx_audio
b400-b403 : VIA Technologies, Inc. AC97 Audio Controller
b400-b403 : via82cxxx_audio
b800-b81f : Intel Corporation 82557 [Ethernet Pro 100]
b800-b81f : eepro100
bc00-bc07 : Lucent Microelectronics 56k WinModem
c000-c0ff : Lucent Microelectronics 56k WinModem
c400-c4ff : Realtek Semiconductor Co., Ltd. RTL-8139
c400-c4ff : 8139too
[root@C242326-a linux-2.5.9]# cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-0021178f : Kernel code
00211790-0027510b : Kernel data
17ff0000-17ff2fff : ACPI Non-volatile Storage
17ff3000-17ffffff : ACPI Tables
d0000000-d3ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
d4000000-d7ffffff : PCI Bus #01
d4000000-d7ffffff : ATI Technologies Inc Rage 128 RF
d4000000-d5ffffff : vesafb
d8000000-d9ffffff : PCI Bus #01
d9000000-d9003fff : ATI Technologies Inc Rage 128 RF
db000000-db0fffff : Intel Corporation 82557 [Ethernet Pro 100]
db100000-db100fff : Intel Corporation 82557 [Ethernet Pro 100]
db100000-db100fff : eepro100
db101000-db1010ff : Lucent Microelectronics 56k WinModem
db102000-db1020ff : Realtek Semiconductor Co., Ltd. RTL-8139
db102000-db1020ff : 8139too
ffff0000-ffffffff : reserved
[7.5] lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d4000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at a000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at a400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at a800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 11
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 20)
Subsystem: VIA Technologies, Inc.: Unknown device 4511
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 12
Region 0: I/O ports at ac00 [size=256]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at b400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 02)
Subsystem: Intel Corp. EtherExpress PRO/100B (TX)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at db100000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at b800 [size=32]
Region 2: Memory at db000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
00:12.0 Communication controller: Lucent Microelectronics 56k WinModem (rev
01)
Subsystem: Lucent Microelectronics LT WinModem 56k Data+Fax+Voice+Dsvd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at db101000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at bc00 [size=8]
Region 2: I/O ports at c000 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at db102000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if
00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[root@C242326-a linux-2.5.9]#
[7.6] cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: CD-RW CW-7586 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
[root@C242326-a linux-2.5.9]#
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE8xe0Jod000q4aikwRAiR0AJ4sHjg+/8M3dXkg97r5SobzTS9NMQCfV9MM
9aVaWCJfimzEdHnhB+FKVnw=
=Nj60
-----END PGP SIGNATURE-----
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> [1] Main.c fails to compile on 2.5.9 kernel, during fresh install/rebuild.
> [2] Initial call to bzImage on make dies immediately with exit 1
> [3] Key Word: MAIN
> [4] Version: 2.4.8-34.1mdk #1 Mon Nov 19 12:40:39 MST 2001 i686 unknown
> [Duron 700 Mhz]
> [5] Error reported : make[1]: Leaving directory
> `/usr/src/linux-new/linux-2.5.9'
> gcc -D__KERNEL__ -I/usr/src/linux-new/linux-2.5.9/include -Wall
> - -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> - -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
> - -march=athlon -DKBUILD_BASENAME=main -c -o init/main.o init/main.c
> init/main.c:279: redefinition of `setup_per_cpu_areas'
> init/main.c:275: `setup_per_cpu_areas' previously defined here
Linus accidentaly applied the setup_per_cpu_areas patch twice
this patch should fix it
--- linux/init/main.c Tue Apr 23 14:06:02 2002
+++ linux/init/main.c_new Wed Apr 24 09:41:55 2002
@@ -275,10 +275,6 @@
{
}
-static inline void setup_per_cpu_areas(void)
-{
-}
-
#else
#ifdef
__GENERIC_PER_CPU
---------------------------------------------
This message was sent using M-Web Airmail.
JUST LIKE THAT
Are you ready for 10-digit dialling on the 8th of May?
To find out how this will affect your Internet connection go to http://www.mweb.co.za/ten
http://airmail.mweb.co.za/