Hello,
>From dmesg:
---
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive
Debug: sleeping function called from illegal context at slab.c:1374
d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d483c c03d4874 c03d483c
d7fdde6c c01ec775 d7ff6b2c 000001d0 0000e307 c03d4888 00000000 00000206
00000042 00000000 00000042 c03d483c c03d482c c03d4780 d7fddeb4 c01ec81a
Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>] [<c01fe289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>] [<c020fdfe>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
Debug: sleeping function called from illegal context at slab.c:1374
d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d4df8 c03d4e30 c03d4df8
d7fdde6c c01ec775 d7ff6b2c 000001d0 000000b0 c03d4e44 00000000 00000202
00000042 00000000 00000042 c03d4df8 c03d4de8 c03d4d3c d7fddeb4 c01ec81a
Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>] [<c01fe289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>] [<c020fe1d>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 26760384 sectors (13701 MB) w/418KiB Cache, CHS=1665/255/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2
ide-floppy driver 0.99.newide
hdd: 244766kB, 489532 blocks, 512 sector size
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
/dev/ide/host0/bus1/target1/lun0: unknown partition table
/dev/ide/host0/bus1/target1/lun0: unknown partition table
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi_eh_offline_sdevs: Device set offline - notready or command retry failedafter error recovery: host0 channel 0 id 0 lun 0
---
ksymoops -m /usr/src/linux/System.map -v /usr/src/linux/vmlinux -K -O -L < dmesg-2.5.40
ksymoops 2.3.5 on i686 2.5.40. Options used
-v /usr/src/linux/vmlinux (specified)
-K (specified)
-L (specified)
-O (specified)
-m /usr/src/linux/System.map (specified)
cpu: 0, clocks: 99683, slice: 49841
3c59x: Donald Becker and others. http://www.scyld.com/network/vortex.html
d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d483c c03d4874 c03d483c
d7fdde6c c01ec775 d7ff6b2c 000001d0 0000e307 c03d4888 00000000 00000206
00000042 00000000 00000042 c03d483c c03d482c c03d4780 d7fddeb4 c01ec81a
Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>] [<c01fe289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>] [<c020fdfe>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d4df8 c03d4e30 c03d4df8
d7fdde6c c01ec775 d7ff6b2c 000001d0 000000b0 c03d4e44 00000000 00000202
00000042 00000000 00000042 c03d4df8 c03d4de8 c03d4d3c d7fddeb4 c01ec81a
Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>] [<c01fe289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>] [<c020fe1d>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c013750b <__kmem_cache_alloc+10b/110>
Trace; c01ec775 <blk_init_free_list+65/f0>
Trace; c01ec81a <blk_init_queue+1a/110>
Trace; c0109ed9 <setup_irq+a9/e0>
Trace; c01fe289 <ide_init_queue+39/a0>
Trace; c0205da0 <do_ide_request+0/30>
Trace; c01fe4c3 <init_irq+1d3/3a0>
Trace; c0206160 <ide_intr+0/190>
Trace; c01fe958 <hwif_init+d8/260>
Trace; c01fe176 <probe_hwif_init+26/80>
Trace; c020fdfe <ide_setup_pci_device+4e/80>
Trace; c01fd487 <piix_init_one+37/40>
Trace; c010507d <init+3d/170>
Trace; c0105040 <init+0/170>
Trace; c0105675 <kernel_thread_helper+5/10>
Trace; c013750b <__kmem_cache_alloc+10b/110>
Trace; c01ec775 <blk_init_free_list+65/f0>
Trace; c01ec81a <blk_init_queue+1a/110>
Trace; c0109ed9 <setup_irq+a9/e0>
Trace; c01fe289 <ide_init_queue+39/a0>
Trace; c0205da0 <do_ide_request+0/30>
Trace; c01fe4c3 <init_irq+1d3/3a0>
Trace; c0206160 <ide_intr+0/190>
Trace; c01fe958 <hwif_init+d8/260>
Trace; c01fe176 <probe_hwif_init+26/80>
Trace; c020fe1d <ide_setup_pci_device+6d/80>
Trace; c01fd487 <piix_init_one+37/40>
Trace; c010507d <init+3d/170>
Trace; c0105040 <init+0/170>
Trace; c0105675 <kernel_thread_helper+5/10>
1 warning issued. Results may not be reliable.
Exit 1
---
I have put the dmesg here:
http://ulima.unil.ch/greg/linux/dmesg-2.5.40
And the config file I used to compil the kernel here:
http://ulima.unil.ch/greg/linux/config-2.5.40
The output of ver_linux:
http://ulima.unil.ch/greg/linux/ver_linux
Finaly lspci -v:
http://ulima.unil.ch/greg/linux/lspci
I don't know if other info are needed...
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
> Hello,
>
> From dmesg:
>
> ---
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
idebu> s=xx
> PIIX4: IDE controller at PCI slot 00:07.1
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive
> Debug: sleeping function called from illegal context at slab.c:1374
> d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d483c c03d4874
c03d483c>
> d7fdde6c c01ec775 d7ff6b2c 000001d0 0000e307 c03d4888 00000000
0> 0000206
> 00000042 00000000 00000042 c03d483c c03d482c c03d4780 d7fddeb4
c> 01ec81a
> Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>]
[<c01fe> 289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>]
> [<c020fdfe>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
> hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
> Debug: sleeping function called from illegal context at slab.c:1374
^^^^^^^^^^^^^^
It's actually not an Ooops it is some debug code to capture code
which is doing the wrong thing. Dont worry about it.
> d7fdde14 d7fdde34 c013750b c02e67df 0000055e c03d4df8 c03d4e30
c03d4df8>
> d7fdde6c c01ec775 d7ff6b2c 000001d0 000000b0 c03d4e44 00000000
0> 0000202
> 00000042 00000000 00000042 c03d4df8 c03d4de8 c03d4d3c d7fddeb4
c> 01ec81a
> Call Trace: [<c013750b>] [<c01ec775>] [<c01ec81a>] [<c0109ed9>]
[<c01fe> 289>] [<c0205da0>] [<c01fe4c3>] [<c0206160>] [<c01fe958>] [<c01fe176>]
> [<c020fe1d>] [<c01fd487>] [<c010507d>] [<c0105040>] [<c0105675>]
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi_eh_offline_sdevs: Device set offline - notready or command retry
f> ailedafter error recovery: host0 channel 0 id 0 lun 0
^^^^^^^^^^^^^^
This is what I am worried about, I also saw this at my home PC, but
doing cdrecord -scanbus does pick up my cdwiter.
BTW: Thanx to whoever fixed ide-scsi I can now boot without getting an
Oops (that I reported in 2.5.39). Now I seem to have lost the mouse
but I will look ate that when I get back home.
Cheers
---------------------------------------------
This message was sent using M-Web Airmail.
JUST LIKE THAT
Are you ready for 10-digit dialling?
To find out how this will affect your Internet connection go to http://www.mweb.co.za/ten
http://airmail.mweb.co.za/
On Wed, Oct 02, 2002 at 09:49:23AM +0000, [email protected] wrote:
> It's actually not an Ooops it is some debug code to capture code
> which is doing the wrong thing. Dont worry about it.
OK, unfortunately, the result is that my DVD-rom is not accesible...
> This is what I am worried about, I also saw this at my home PC, but
> doing cdrecord -scanbus does pick up my cdwiter.
cdrecord -scanbus:
Cdrecord 1.11a26 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
> BTW: Thanx to whoever fixed ide-scsi I can now boot without getting an
> Oops (that I reported in 2.5.39). Now I seem to have lost the mouse
> but I will look ate that when I get back home.
I don't know if it really an ide-scsi related problem, but I like to be
able to hear music while working...
Thank for your answer,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]