1) Preserve the v850 system-call-number register when handling a signal;
otherwise system calls will not be correctly restarted afterwards
2) Correctly handle illegal insn exceptions, which need a special
instruction to return (not reti), and save PC/PSW to a different place
2) Remove some unnecessary register saving in the trap handler
3) Consolidate various places that use the register save/restore macros
4) Eliminate some unused compile-time configuration stuff
5) A bit of whitespace and other syntactic cleanup
diff -ruN -X../cludes linux-2.5.62-uc0.orig/arch/v850/kernel/bug.c linux-2.5.62-uc0/arch/v850/kernel/bug.c
--- linux-2.5.62-uc0.orig/arch/v850/kernel/bug.c 2002-11-28 10:24:54.000000000 +0900
+++ linux-2.5.62-uc0/arch/v850/kernel/bug.c 2003-02-18 11:41:09.000000000 +0900
@@ -1,8 +1,8 @@
/*
* arch/v850/kernel/bug.c -- Bug reporting functions
*
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <[email protected]>
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <[email protected]>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
@@ -40,12 +40,6 @@
return -ENOSYS;
}
-int debug_trap (struct pt_regs *regs)
-{
- printk (KERN_CRIT "debug trap at 0x%08lx!\n", regs->pc);
- return -ENOSYS;
-}
-
#ifdef CONFIG_RESET_GUARD
void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
struct task_struct *task, unsigned long sp)
diff -ruN -X../cludes linux-2.5.62-uc0.orig/arch/v850/kernel/entry.S linux-2.5.62-uc0/arch/v850/kernel/entry.S
--- linux-2.5.62-uc0.orig/arch/v850/kernel/entry.S 2002-12-24 15:01:07.000000000 +0900
+++ linux-2.5.62-uc0/arch/v850/kernel/entry.S 2003-02-18 11:41:09.000000000 +0900
@@ -2,8 +2,8 @@
* arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
* and context-switching
*
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <[email protected]>
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <[email protected]>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
@@ -38,27 +38,27 @@
sst.w r6, PTO+PT_GPR(6)[ep]; \
sst.w r7, PTO+PT_GPR(7)[ep]; \
sst.w r8, PTO+PT_GPR(8)[ep]; \
- sst.w r9, PTO+PT_GPR(9)[ep];
+ sst.w r9, PTO+PT_GPR(9)[ep]
/* Restore argument registers from the struct pt_regs pointed to by EP. */
#define RESTORE_ARG_REGS \
sld.w PTO+PT_GPR(6)[ep], r6; \
sld.w PTO+PT_GPR(7)[ep], r7; \
sld.w PTO+PT_GPR(8)[ep], r8; \
- sld.w PTO+PT_GPR(9)[ep], r9;
+ sld.w PTO+PT_GPR(9)[ep], r9
/* Save value return registers to the struct pt_regs pointed to by EP. */
#define SAVE_RVAL_REGS \
sst.w r10, PTO+PT_GPR(10)[ep]; \
- sst.w r11, PTO+PT_GPR(11)[ep];
+ sst.w r11, PTO+PT_GPR(11)[ep]
/* Restore value return registers from the struct pt_regs pointed to by EP. */
#define RESTORE_RVAL_REGS \
sld.w PTO+PT_GPR(10)[ep], r10; \
- sld.w PTO+PT_GPR(11)[ep], r11;
+ sld.w PTO+PT_GPR(11)[ep], r11
#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS \
sst.w r1, PTO+PT_GPR(1)[ep]; \
- sst.w r5, PTO+PT_GPR(5)[ep];
+ sst.w r5, PTO+PT_GPR(5)[ep]
#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL \
sst.w r12, PTO+PT_GPR(12)[ep]; \
sst.w r13, PTO+PT_GPR(13)[ep]; \
@@ -67,10 +67,10 @@
sst.w r16, PTO+PT_GPR(16)[ep]; \
sst.w r17, PTO+PT_GPR(17)[ep]; \
sst.w r18, PTO+PT_GPR(18)[ep]; \
- sst.w r19, PTO+PT_GPR(19)[ep];
+ sst.w r19, PTO+PT_GPR(19)[ep]
#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS \
sld.w PTO+PT_GPR(1)[ep], r1; \
- sld.w PTO+PT_GPR(5)[ep], r5;
+ sld.w PTO+PT_GPR(5)[ep], r5
#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL \
sld.w PTO+PT_GPR(12)[ep], r12; \
sld.w PTO+PT_GPR(13)[ep], r13; \
@@ -79,40 +79,34 @@
sld.w PTO+PT_GPR(16)[ep], r16; \
sld.w PTO+PT_GPR(17)[ep], r17; \
sld.w PTO+PT_GPR(18)[ep], r18; \
- sld.w PTO+PT_GPR(19)[ep], r19;
+ sld.w PTO+PT_GPR(19)[ep], r19
/* Save `call clobbered' registers to the struct pt_regs pointed to by EP. */
#define SAVE_CALL_CLOBBERED_REGS \
SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS; \
SAVE_ARG_REGS; \
SAVE_RVAL_REGS; \
- SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL;
+ SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
/* Restore `call clobbered' registers from the struct pt_regs pointed to
by EP. */
#define RESTORE_CALL_CLOBBERED_REGS \
RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS; \
RESTORE_ARG_REGS; \
RESTORE_RVAL_REGS; \
- RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL;
+ RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
/* Save `call clobbered' registers except for the return-value registers
to the struct pt_regs pointed to by EP. */
#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL \
SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS; \
SAVE_ARG_REGS; \
- SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL;
+ SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
/* Restore `call clobbered' registers except for the return-value registers
from the struct pt_regs pointed to by EP. */
#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL \
RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS; \
RESTORE_ARG_REGS; \
- RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL;
-
-/* Zero `call clobbered' registers except for the return-value registers. */
-#define ZERO_CALL_CLOBBERED_REGS_NO_RVAL \
- mov r0, r1; mov r0, r5; \
- mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15; \
- mov r0, r16; mov r0, r17; mov r0, r18; mov r0, r19;
+ RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
/* Save `call saved' registers to the struct pt_regs pointed to by EP. */
#define SAVE_CALL_SAVED_REGS \
@@ -126,7 +120,7 @@
sst.w r26, PTO+PT_GPR(26)[ep]; \
sst.w r27, PTO+PT_GPR(27)[ep]; \
sst.w r28, PTO+PT_GPR(28)[ep]; \
- sst.w r29, PTO+PT_GPR(29)[ep];
+ sst.w r29, PTO+PT_GPR(29)[ep]
/* Restore `call saved' registers from the struct pt_regs pointed to by EP. */
#define RESTORE_CALL_SAVED_REGS \
sld.w PTO+PT_GPR(2)[ep], r2; \
@@ -139,68 +133,53 @@
sld.w PTO+PT_GPR(26)[ep], r26; \
sld.w PTO+PT_GPR(27)[ep], r27; \
sld.w PTO+PT_GPR(28)[ep], r28; \
- sld.w PTO+PT_GPR(29)[ep], r29;
+ sld.w PTO+PT_GPR(29)[ep], r29
+
+/* Save the PC stored in the special register SAVEREG to the struct pt_regs
+ pointed to by EP. r19 is clobbered. */
+#define SAVE_PC(savereg) \
+ stsr SR_ ## savereg, r19; \
+ sst.w r19, PTO+PT_PC[ep]
+/* Restore the PC from the struct pt_regs pointed to by EP, to the special
+ register SAVEREG. LP is clobbered (it is used as a scratch register
+ because the POP_STATE macro restores it, and this macro is usually used
+ inside POP_STATE). */
+#define RESTORE_PC(savereg) \
+ sld.w PTO+PT_PC[ep], lp; \
+ ldsr lp, SR_ ## savereg
+/* Save the PSW register stored in the special register SAVREG to the
+ struct pt_regs pointed to by EP r19 is clobbered. */
+#define SAVE_PSW(savereg) \
+ stsr SR_ ## savereg, r19; \
+ sst.w r19, PTO+PT_PSW[ep]
+/* Restore the PSW register from the struct pt_regs pointed to by EP, to
+ the special register SAVEREG. LP is clobbered (it is used as a scratch
+ register because the POP_STATE macro restores it, and this macro is
+ usually used inside POP_STATE). */
+#define RESTORE_PSW(savereg) \
+ sld.w PTO+PT_PSW[ep], lp; \
+ ldsr lp, SR_ ## savereg
-/* Save system registers to the struct pt_regs pointed to by REG.
+/* Save CTPC/CTPSW/CTBP registers to the struct pt_regs pointed to by REG.
r19 is clobbered. */
-#define SAVE_SYS_REGS \
- stsr SR_EIPC, r19; /* user's PC, before interrupt */ \
- sst.w r19, PTO+PT_PC[ep]; \
- stsr SR_EIPSW, r19; /* & PSW (XXX save this?) */ \
- sst.w r19, PTO+PT_PSW[ep]; \
- stsr SR_CTPC, r19; /* (XXX maybe not used in kernel?) */ \
+#define SAVE_CT_REGS \
+ stsr SR_CTPC, r19; \
sst.w r19, PTO+PT_CTPC[ep]; \
- stsr SR_CTPSW, r19; /* " */ \
+ stsr SR_CTPSW, r19; \
sst.w r19, PTO+PT_CTPSW[ep]; \
- stsr SR_CTBP, r19; /* " */ \
- sst.w r19, PTO+PT_CTBP[ep];
-/* Restore system registers from the struct pt_regs pointed to by EP.
+ stsr SR_CTBP, r19; \
+ sst.w r19, PTO+PT_CTBP[ep]
+/* Restore CTPC/CTPSW/CTBP registers from the struct pt_regs pointed to by EP.
LP is clobbered (it is used as a scratch register because the POP_STATE
macro restores it, and this macro is usually used inside POP_STATE). */
-#define RESTORE_SYS_REGS \
- sld.w PTO+PT_PC[ep], lp; \
- ldsr lp, SR_EIPC; /* user's PC, before interrupt */ \
- sld.w PTO+PT_PSW[ep], lp; \
- ldsr lp, SR_EIPSW; /* & PSW (XXX save this?) */ \
+#define RESTORE_CT_REGS \
sld.w PTO+PT_CTPC[ep], lp; \
- ldsr lp, SR_CTPC; /* (XXX maybe not used in kernel?) */ \
+ ldsr lp, SR_CTPC; \
sld.w PTO+PT_CTPSW[ep], lp; \
- ldsr lp, SR_CTPSW; /* " */ \
+ ldsr lp, SR_CTPSW; \
sld.w PTO+PT_CTBP[ep], lp; \
- ldsr lp, SR_CTBP; /* " */
-
-
-/* Save system registers to the struct pt_regs pointed to by REG. This is a
- NMI-specific version, because NMIs save the PC/PSW in a different place
- than other interrupt requests. r19 is clobbered. */
-#define SAVE_SYS_REGS_FOR_NMI \
- stsr SR_FEPC, r19; /* user's PC, before NMI */ \
- sst.w r19, PTO+PT_PC[ep]; \
- stsr SR_FEPSW, r19; /* & PSW (XXX save this?) */ \
- sst.w r19, PTO+PT_PSW[ep]; \
- stsr SR_CTPC, r19; /* (XXX maybe not used in kernel?) */ \
- sst.w r19, PTO+PT_CTPC[ep]; \
- stsr SR_CTPSW, r19; /* " */ \
- sst.w r19, PTO+PT_CTPSW[ep]; \
- stsr SR_CTBP, r19; /* " */ \
- sst.w r19, PTO+PT_CTBP[ep];
-/* Restore system registers from the struct pt_regs pointed to by EP. This is
- a NMI-specific version, because NMIs save the PC/PSW in a different place
- than other interrupt requests. LP is clobbered (it is used as a scratch
- register because the POP_STATE macro restores it, and this macro is usually
- used inside POP_STATE). */
-#define RESTORE_SYS_REGS_FOR_NMI \
- ldsr lp, SR_FEPC; /* user's PC, before NMI */ \
- sld.w PTO+PT_PC[ep], lp; \
- ldsr lp, SR_FEPSW; /* & PSW (XXX save this?) */ \
- sld.w PTO+PT_PSW[ep], lp; \
- ldsr lp, SR_CTPC; /* (XXX maybe not used in kernel?) */ \
- sld.w PTO+PT_CTPC[ep], lp; \
- ldsr lp, SR_CTPSW; /* " */ \
- sld.w PTO+PT_CTPSW[ep], lp; \
- ldsr lp, SR_CTBP; /* " */ \
- sld.w PTO+PT_CTBP[ep], lp;
+ ldsr lp, SR_CTBP
/* Push register state, except for the stack pointer, on the stack in the form
@@ -213,7 +192,7 @@
mov sp, ep; \
sst.w gp, PTO+PT_GPR(GPR_GP)[ep]; \
sst.w lp, PTO+PT_GPR(GPR_LP)[ep]; \
- type ## _STATE_SAVER;
+ type ## _STATE_SAVER
/* Pop a register state, except for the stack pointer, from the struct pt_regs
on the stack. */
#define POP_STATE(type) \
@@ -222,161 +201,175 @@
sld.w PTO+PT_GPR(GPR_GP)[ep], gp; \
sld.w PTO+PT_GPR(GPR_LP)[ep], lp; \
sld.w PTO+PT_GPR(GPR_EP)[ep], ep; \
- addi STATE_SAVE_SIZE, sp, sp; /* Clean up our stack space. */
+ addi STATE_SAVE_SIZE, sp, sp /* Clean up our stack space. */
-/* Switch to the kernel stack if necessary, and push register state on
- the stack in the form of a struct pt_regs. Also load the current
- task pointer if switching from user mode. The stack-pointer (r3)
- should have already been saved to the memory location SP_SAVE_LOC
- (the reason for this is that the interrupt vectors may be beyond a
- 22-bit signed offset jump from the actual interrupt handler, and this
- allows them to save the stack-pointer and use that register to do an
- indirect jump). This macro makes sure that `special' registers,
- system registers, and the stack pointer are saved; TYPE identifies
- the set of extra registers to be saved as well. SYSCALL_NUM is the
- register in which the system-call number this state is for is stored
- (r0 if this isn't a system call). Interrupts should already be
- disabled when calling this. */
+/* Switch to the kernel stack if necessary, and push register state on the
+ stack in the form of a struct pt_regs. Also load the current task
+ pointer if switching from user mode. The stack-pointer (r3) should have
+ already been saved to the memory location SP_SAVE_LOC (the reason for
+ this is that the interrupt vectors may be beyond a 22-bit signed offset
+ jump from the actual interrupt handler, and this allows them to save the
+ stack-pointer and use that register to do an indirect jump). This macro
+ makes sure that `special' registers, system registers, and the stack
+ pointer are saved; TYPE identifies the set of extra registers to be
+ saved as well. SYSCALL_NUM is the register in which the system-call
+ number this state is for is stored (r0 if this isn't a system call).
+ Interrupts should already be disabled when calling this. */
#define SAVE_STATE(type, syscall_num, sp_save_loc) \
- tst1 0, KM; /* See if already in kernel mode. */ \
+ tst1 0, KM; /* See if already in kernel mode. */ \
bz 1f; \
- /* Kernel-mode state save. */ \
- ld.w sp_save_loc, sp; /* Reload kernel stack-pointer. */ \
- st.w sp, (PT_GPR(GPR_SP)-PT_SIZE)[sp]; /* Save original SP. */ \
- PUSH_STATE(type); \
- mov 1, r19; /* Was in kernel-mode. */ \
- sst.w r19, PTO+PT_KERNEL_MODE[ep]; /* [ep is set by PUSH_STATE] */ \
- br 2f; \
-1: /* User-mode state save. */ \
- ld.w KSP, sp; /* Switch to kernel stack. */ \
- PUSH_STATE(type); \
- sst.w r0, PTO+PT_KERNEL_MODE[ep]; /* Was in user-mode. */ \
- ld.w sp_save_loc, r19; \
- sst.w r19, PTO+PT_GPR(GPR_SP)[ep]; /* Store user SP. */ \
- mov 1, r19; \
- st.b r19, KM; /* Now we're in kernel-mode. */ \
+ ld.w sp_save_loc, sp; /* ... yes, use saved SP. */ \
+ br 2f; \
+1: ld.w KSP, sp; /* ... no, switch to kernel stack. */ \
+2: PUSH_STATE(type); \
+ ld.b KM, r19; /* Remember old kernel-mode. */ \
+ sst.w r19, PTO+PT_KERNEL_MODE[ep]; \
+ ld.w sp_save_loc, r19; /* Remember old SP. */ \
+ sst.w r19, PTO+PT_GPR(GPR_SP)[ep]; \
+ mov 1, r19; /* Now definitely in kernel-mode. */ \
+ st.b r19, KM; \
GET_CURRENT_TASK(CURRENT_TASK); /* Fetch the current task pointer. */ \
-2: /* Save away the syscall number. */ \
- sst.w syscall_num, PTO+PT_SYSCALL[ep]
+ /* Save away the syscall number. */ \
+ sst.w syscall_num, PTO+PT_SYSCALL[ep]
/* Save register state not normally saved by PUSH_STATE for TYPE. */
#define SAVE_EXTRA_STATE(type) \
mov sp, ep; \
- type ## _EXTRA_STATE_SAVER;
+ type ## _EXTRA_STATE_SAVER
/* Restore register state not normally restored by POP_STATE for TYPE. */
#define RESTORE_EXTRA_STATE(type) \
mov sp, ep; \
- type ## _EXTRA_STATE_RESTORER;
+ type ## _EXTRA_STATE_RESTORER
/* Save any call-clobbered registers not normally saved by PUSH_STATE
for TYPE. */
#define SAVE_EXTRA_STATE_FOR_FUNCALL(type) \
mov sp, ep; \
- type ## _FUNCALL_EXTRA_STATE_SAVER;
+ type ## _FUNCALL_EXTRA_STATE_SAVER
/* Restore any call-clobbered registers not normally restored by POP_STATE for
TYPE. */
#define RESTORE_EXTRA_STATE_FOR_FUNCALL(type) \
mov sp, ep; \
- type ## _FUNCALL_EXTRA_STATE_RESTORER;
+ type ## _FUNCALL_EXTRA_STATE_RESTORER
-/* These are extra_state_saver/restorer values for a user trap. Note that we
- save the argument registers so that restarted syscalls will function
- properly (otherwise it wouldn't be necessary), and we must _not_ restore
- the return-value registers (so that traps can return a value!), but there
- are various options for what happens to other call-clobbered registers,
- selected by preprocessor conditionals. */
-
-#if TRAPS_PRESERVE_CALL_CLOBBERED_REGS
-
-/* Traps save/restore all call-clobbered registers (except for rval regs). */
-#define TRAP_STATE_SAVER \
- SAVE_CALL_CLOBBERED_REGS_NO_RVAL; \
- SAVE_SYS_REGS
-#define TRAP_STATE_RESTORER \
- RESTORE_CALL_CLOBBERED_REGS_NO_RVAL; \
- RESTORE_SYS_REGS
-
-#else /* !TRAPS_PRESERVE_CALL_CLOBBERED_REGS */
+/* These are extra_state_saver/restorer values for a user trap. Note
+ that we save the argument registers so that restarted syscalls will
+ function properly (otherwise it wouldn't be necessary), and we must
+ _not_ restore the return-value registers (so that traps can return a
+ value!), but call-clobbered registers are not saved at all, as the
+ caller of the syscall function should have saved them. */
+#define TRAP_RET reti
/* Traps don't save call-clobbered registers (but do still save arg regs). */
#define TRAP_STATE_SAVER \
- SAVE_ARG_REGS; \
- SAVE_SYS_REGS
-
-#if TRAPS_ZERO_CALL_CLOBBERED_REGS
-
-/* Traps zero call-clobbered registers (except for arg/rval regs) before
- returning from a system call, to avoid any internal values from leaking out
- of the kernel. */
-#define TRAP_STATE_RESTORER \
- ZERO_CALL_CLOBBERED_REGS_NO_ARGS_NO_RVAL; \
- RESTORE_ARG_REGS; \
- RESTORE_SYS_REGS
-
-#else /* !TRAPS_ZERO_CALL_CLOBBERED_REGS */
-
+ SAVE_ARG_REGS; \
+ SAVE_PC(EIPC)
/* When traps return, they just leave call-clobbered registers (except for arg
regs) with whatever value they have from the kernel. */
#define TRAP_STATE_RESTORER \
- RESTORE_ARG_REGS; \
- RESTORE_SYS_REGS
-
-#endif /* TRAPS_ZERO_CALL_CLOBBERED_REGS */
-#endif /* TRAPS_PRESERVE_CALL_CLOBBERED_REGS */
-
-/* Save registers not normally saved by traps. */
+ RESTORE_ARG_REGS; \
+ RESTORE_PC(EIPC)
+/* Save registers not normally saved by traps. We need to save r12, even
+ though it's nominally call-clobbered, because it's used when restarting
+ a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
+ expects r12 to be restored when the trap returns). Similarly, we must
+ save the PSW, so that it's at least in a known state in the the pt_regs
+ structure. */
#define TRAP_EXTRA_STATE_SAVER \
- SAVE_RVAL_REGS; \
- SAVE_CALL_SAVED_REGS
+ SAVE_RVAL_REGS; \
+ sst.w r12, PTO+PT_GPR(12)[ep]; \
+ SAVE_CALL_SAVED_REGS; \
+ SAVE_PSW(EIPSW); \
+ SAVE_CT_REGS
#define TRAP_EXTRA_STATE_RESTORER \
- RESTORE_RVAL_REGS; \
- RESTORE_CALL_SAVED_REGS
+ RESTORE_RVAL_REGS; \
+ sld.w PTO+PT_GPR(12)[ep], r12; \
+ RESTORE_CALL_SAVED_REGS; \
+ RESTORE_PSW(EIPSW); \
+ RESTORE_CT_REGS
#define TRAP_FUNCALL_EXTRA_STATE_SAVER \
- SAVE_RVAL_REGS
+ SAVE_RVAL_REGS
#define TRAP_FUNCALL_EXTRA_STATE_RESTORER \
- RESTORE_RVAL_REGS
-
+ RESTORE_RVAL_REGS
/* Register saving/restoring for maskable interrupts. */
+#define IRQ_RET reti
#define IRQ_STATE_SAVER \
- SAVE_CALL_CLOBBERED_REGS; \
- SAVE_SYS_REGS
+ SAVE_CALL_CLOBBERED_REGS; \
+ SAVE_PC(EIPC); \
+ SAVE_PSW(EIPSW)
#define IRQ_STATE_RESTORER \
- RESTORE_CALL_CLOBBERED_REGS; \
- RESTORE_SYS_REGS
+ RESTORE_CALL_CLOBBERED_REGS; \
+ RESTORE_PC(EIPC); \
+ RESTORE_PSW(EIPSW)
#define IRQ_EXTRA_STATE_SAVER \
- SAVE_CALL_SAVED_REGS
+ SAVE_CALL_SAVED_REGS; \
+ SAVE_CT_REGS
#define IRQ_EXTRA_STATE_RESTORER \
- RESTORE_CALL_SAVED_REGS
+ RESTORE_CALL_SAVED_REGS; \
+ RESTORE_CT_REGS
#define IRQ_FUNCALL_EXTRA_STATE_SAVER /* nothing */
#define IRQ_FUNCALL_EXTRA_STATE_RESTORER /* nothing */
/* Register saving/restoring for non-maskable interrupts. */
+#define NMI_RET reti
#define NMI_STATE_SAVER \
- SAVE_CALL_CLOBBERED_REGS; \
- SAVE_SYS_REGS_FOR_NMI
+ SAVE_CALL_CLOBBERED_REGS; \
+ SAVE_PC(FEPC); \
+ SAVE_PSW(FEPSW);
#define NMI_STATE_RESTORER \
- RESTORE_CALL_CLOBBERED_REGS; \
- RESTORE_SYS_REGS_FOR_NMI
+ RESTORE_CALL_CLOBBERED_REGS; \
+ RESTORE_PC(FEPC); \
+ RESTORE_PSW(FEPSW);
#define NMI_EXTRA_STATE_SAVER \
- SAVE_CALL_SAVED_REGS
+ SAVE_CALL_SAVED_REGS; \
+ SAVE_CT_REGS
#define NMI_EXTRA_STATE_RESTORER \
- RESTORE_CALL_SAVED_REGS
+ RESTORE_CALL_SAVED_REGS; \
+ RESTORE_CT_REGS
#define NMI_FUNCALL_EXTRA_STATE_SAVER /* nothing */
#define NMI_FUNCALL_EXTRA_STATE_RESTORER /* nothing */
-
-/* Register saving/restoring for a context switch. We don't need to save too
- many registers, because context-switching looks like a function call (via
- the function `switch_thread'), so callers will save any call-clobbered
- registers themselves. The stack pointer and return value are handled by
- switch_thread itself. */
+
+/* Register saving/restoring for debug traps. */
+#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
+#define DBTRAP_STATE_SAVER \
+ SAVE_CALL_CLOBBERED_REGS; \
+ SAVE_PC(DBPC); \
+ SAVE_PSW(DBPSW)
+#define DBTRAP_STATE_RESTORER \
+ RESTORE_CALL_CLOBBERED_REGS; \
+ RESTORE_PC(DBPC); \
+ RESTORE_PSW(DBPSW)
+#define DBTRAP_EXTRA_STATE_SAVER \
+ SAVE_CALL_SAVED_REGS; \
+ SAVE_CT_REGS
+#define DBTRAP_EXTRA_STATE_RESTORER \
+ RESTORE_CALL_SAVED_REGS; \
+ RESTORE_CT_REGS
+#define DBTRAP_FUNCALL_EXTRA_STATE_SAVER /* nothing */
+#define DBTRAP_FUNCALL_EXTRA_STATE_RESTORER /* nothing */
+
+/* Register saving/restoring for a context switch. We don't need to save
+ too many registers, because context-switching looks like a function call
+ (via the function `switch_thread'), so callers will save any
+ call-clobbered registers themselves. We do need to save the CT regs, as
+ they're normally not saved during kernel entry (the kernel doesn't use
+ them). We save PSW so that interrupt-status state will correctly follow
+ each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
+ it doesn't matter since threads are always in almost exactly the same
+ processor state during a context switch. The stack pointer and return
+ value are handled by switch_thread itself. */
#define SWITCH_STATE_SAVER \
- SAVE_CALL_SAVED_REGS
+ SAVE_CALL_SAVED_REGS; \
+ SAVE_PSW(PSW); \
+ SAVE_CT_REGS
#define SWITCH_STATE_RESTORER \
- RESTORE_CALL_SAVED_REGS
+ RESTORE_CALL_SAVED_REGS; \
+ RESTORE_PSW(PSW); \
+ RESTORE_CT_REGS
/* Restore register state from the struct pt_regs on the stack, switch back
@@ -400,24 +393,27 @@
andi _TIF_SIGPENDING, r19, r0; \
bnz 4f; /* Signals to handle, handle them */ \
\
-/* Finally, return to user state. */ \
+/* Return to user state. */ \
1: st.b r0, KM; /* Now officially in user state. */ \
- POP_STATE(type); \
- st.w sp, KSP; /* Save the kernel stack pointer. */ \
- ld.w PT_GPR(GPR_SP)-PT_SIZE[sp], sp; \
- /* Restore user stack pointer. */ \
- reti; \
\
-/* Return to kernel state. */ \
+/* Final return. The stack-pointer fiddling is not needed when returning \
+ to kernel-mode, but they don't hurt, and this way we can share the \
+ (somtimes rather lengthy) POP_STATE macro. */ \
2: POP_STATE(type); \
- reti; \
+ st.w sp, KSP; /* Save the kernel stack pointer. */ \
+ ld.w PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */ \
+ type ## _RET; /* Return from the trap/interrupt. */ \
\
/* Call the scheduler before returning from a syscall/trap. */ \
3: SAVE_EXTRA_STATE_FOR_FUNCALL(type); /* Prepare for funcall. */ \
jarl CSYM(schedule), lp; /* Call scheduler */ \
di; /* The scheduler enables interrupts */\
RESTORE_EXTRA_STATE_FOR_FUNCALL(type); \
- br 1b; \
+ GET_CURRENT_THREAD(r18); \
+ ld.w TI_FLAGS[r18], r19; \
+ andi _TIF_SIGPENDING, r19, r0; \
+ bz 1b; /* No signals, return. */ \
+ /* Signals to handle, fall through to handle them. */ \
\
/* Handle a signal return. */ \
4: /* Not all registers are saved by the normal trap/interrupt entry \
@@ -428,13 +424,13 @@
complete register state. Here we save anything not saved by \
the normal entry sequence, so that it may be safely restored \
(in a possibly modified form) after do_signal returns. */ \
- SAVE_EXTRA_STATE(type) /* Save state not saved by entry. */ \
+ SAVE_EXTRA_STATE(type); /* Save state not saved by entry. */ \
movea PTO, sp, r6; /* Arg 1: struct pt_regs *regs */ \
mov r0, r7; /* Arg 2: sigset_t *oldset */ \
jarl CSYM(do_signal), lp; /* Handle any signals */ \
di; /* sig handling enables interrupts */ \
RESTORE_EXTRA_STATE(type); /* Restore extra regs. */ \
- br 1b;
+ br 1b
/* Jump to the appropriate function for the system call number in r12
@@ -454,7 +450,7 @@
jmp [r12]; \
/* The syscall number is invalid, return an error. */ \
1: addi -ENOSYS, r0, r10; \
- jmp [lp];
+ jmp [lp]
.text
@@ -469,7 +465,7 @@
* beyond a 22-bit signed offset jump from the actual interrupt handler, and
* this allows them to save the stack-pointer and use that register to do an
* indirect jump).
- *
+ *
* Syscall protocol:
* Syscall number in r12, args in r6-r9
* Return value in r10
@@ -537,18 +533,15 @@
st.w r13, 16[sp] // arg 5
st.w r14, 20[sp] // arg 6
-#if !TRAPS_PRESERVE_CALL_CLOBBERED_REGS
// Make sure r13 and r14 are preserved, in case we have to restart a
// system call because of a signal (ep has already been set by caller).
st.w r13, PTO+PT_GPR(13)[sp]
st.w r14, PTO+PT_GPR(13)[sp]
mov hilo(ret_from_long_syscall), lp
-#endif /* !TRAPS_PRESERVE_CALL_CLOBBERED_REGS */
MAKE_SYS_CALL // Jump to the syscall function.
END(syscall_long)
-#if !TRAPS_PRESERVE_CALL_CLOBBERED_REGS
/* Entry point used to return from a long syscall. Only needed to restore
r13/r14 if the general trap mechanism doesnt' do so. */
L_ENTRY(ret_from_long_syscall):
@@ -556,7 +549,6 @@
ld.w PTO+PT_GPR(13)[sp], r14
br ret_from_trap // The rest is the same as other traps
END(ret_from_long_syscall)
-#endif /* !TRAPS_PRESERVE_CALL_CLOBBERED_REGS */
/* These syscalls need access to the struct pt_regs on the stack, so we
@@ -564,14 +556,11 @@
L_ENTRY(sys_fork_wrapper):
#ifdef CONFIG_MMU
- // Save state not saved by entry. This is actually slight overkill;
- // it's actually only necessary to save any state restored by
- // switch_thread that's not saved by the trap entry.
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
addi SIGCHLD, r0, r6 // Arg 0: flags
ld.w PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
movea PTO, sp, r8 // Arg 2: parent context
- jr CSYM(fork_common) // Do real work (tail-call).
+ mov hilo(CSYM(fork_common)), r18// Where the real work gets done
+ br save_extra_state_tramp // Save state and go there
#else
// fork almost works, enough to trick you into looking elsewhere :-(
addi -EINVAL, r0, r10
@@ -580,60 +569,66 @@
END(sys_fork_wrapper)
L_ENTRY(sys_vfork_wrapper):
- // Save state not saved by entry. This is actually slight overkill;
- // it's actually only necessary to save any state restored by
- // switch_thread that's not saved by the trap entry.
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
addi CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
ld.w PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
movea PTO, sp, r8 // Arg 2: parent context
- jr CSYM(fork_common) // Do real work (tail-call).
+ mov hilo(CSYM(fork_common)), r18// Where the real work gets done
+ br save_extra_state_tramp // Save state and go there
END(sys_vfork_wrapper)
L_ENTRY(sys_clone_wrapper):
- // Save state not saved by entry. This is actually slight overkill;
- // it's actually only necessary to save any state restored by
- // switch_thread that's not saved by the trap entry.
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
ld.w PTO+PT_GPR(GPR_SP)[sp], r19 // parent's stack pointer
cmp r7, r0 // See if child SP arg (arg 1) is 0.
cmov z, r19, r7, r7 // ... and use the parent's if so.
movea PTO, sp, r8 // Arg 2: parent context
- jr CSYM(fork_common) // Do real work (tail-call).
+ mov hilo(CSYM(fork_common)), r18// Where the real work gets done
+ br save_extra_state_tramp // Save state and go there
END(sys_clone_wrapper)
+
L_ENTRY(sys_execve_wrapper):
movea PTO, sp, r9 // add user context as 4th arg
jr CSYM(sys_execve) // Do real work (tail-call).
END(sys_execve_wrapper)
+
L_ENTRY(sys_sigsuspend_wrapper):
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
movea PTO, sp, r7 // add user context as 2nd arg
- jarl CSYM(sys_sigsuspend), lp// Do real work.
+ mov hilo(CSYM(sys_sigsuspend)), r18 // syscall function
+ jarl save_extra_state_tramp, lp // Save state and do it
br restore_extra_regs_and_ret_from_trap
END(sys_sigsuspend_wrapper)
L_ENTRY(sys_rt_sigsuspend_wrapper):
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
movea PTO, sp, r8 // add user context as 3rd arg
- jarl CSYM(sys_rt_sigsuspend), lp // Do real work.
+ mov hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
+ jarl save_extra_state_tramp, lp // Save state and do it
br restore_extra_regs_and_ret_from_trap
END(sys_rt_sigsuspend_wrapper)
L_ENTRY(sys_sigreturn_wrapper):
- SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
movea PTO, sp, r6 // add user context as 1st arg
- jarl CSYM(sys_sigreturn), lp // Do real work.
+ mov hilo(CSYM(sys_sigreturn)), r18 // syscall function
+ jarl save_extra_state_tramp, lp // Save state and do it
br restore_extra_regs_and_ret_from_trap
END(sys_sigreturn_wrapper)
L_ENTRY(sys_rt_sigreturn_wrapper):
SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
movea PTO, sp, r6 // add user context as 1st arg
- jarl CSYM(sys_rt_sigreturn), lp // Do real work.
+ mov hilo(CSYM(sys_rt_sigreturn)), r18 // syscall function
+ jarl save_extra_state_tramp, lp // Save state and do it
br restore_extra_regs_and_ret_from_trap
END(sys_rt_sigreturn_wrapper)
+/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
+ It's main purpose is to share the rather lengthy code sequence that
+ SAVE_STATE expands into among the above wrapper functions. */
+L_ENTRY(save_extra_state_tramp):
+ SAVE_EXTRA_STATE(TRAP) // Save state not saved by entry.
+ jmp [r18] // Do the work the caller wants
+END(save_extra_state_tramp)
+
+
/*
* Hardware maskable interrupts.
*
@@ -658,37 +653,40 @@
shr 20, r6 // shift back, and remove lower nibble
add -8, r6 // remove bias for irqs
- // If the IRQ index is negative, it's actually one of the exception
- // traps below 0x80 (currently, the illegal instruction trap, and
- // the `debug trap'). Handle these separately.
- bn exception
-
// Call the high-level interrupt handling code.
jarl CSYM(handle_irq), lp
- // fall through
-/* Entry point used to return from an interrupt (also used by exception
- handlers, below). */
-ret_from_irq:
RETURN(IRQ)
+END(irq)
-exception:
- mov hilo(ret_from_irq), lp // where the handler should return
- cmp -2, r6
- bne 1f
- // illegal instruction exception
- addi SIGILL, r0, r6 // Arg 0: signal number
- mov CURRENT_TASK, r7 // Arg 1: task
- jr CSYM(force_sig) // tail call
+/*
+ * Debug trap / illegal-instruction exception
+ *
+ * The stack-pointer (r3) should have already been saved to the memory
+ * location ENTRY_SP (the reason for this is that the interrupt vectors may be
+ * beyond a 22-bit signed offset jump from the actual interrupt handler, and
+ * this allows them to save the stack-pointer and use that register to do an
+ * indirect jump).
+ */
+G_ENTRY(dbtrap):
+ SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-1: cmp -1, r6
- bne bad_trap_wrapper
- // `dbtrap' exception
- movea PTO, sp, r6 // Arg 0: user regs
- jr CSYM(debug_trap) // tail call
+ /* Look to see if the preceding instruction was is a dbtrap or not,
+ to decide which signal we should use. */
+ stsr SR_DBPC, r19 // PC following trapping insn
+ ld.hu -2[r19], r19
+ mov SIGTRAP, r6
+ ori 0xf840, r0, r20 // DBTRAP insn
+ cmp r19, r20 // Was this trap caused by DBTRAP?
+ cmov ne, SIGILL, r6, r6 // Choose signal appropriately
-END(irq)
+ /* Raise the desired signal. */
+ mov CURRENT_TASK, r7 // Arg 1: task
+ jarl CSYM(force_sig), lp // tail call
+
+ RETURN(DBTRAP)
+END(dbtrap)
/*
@@ -711,7 +709,7 @@
Call the generic IRQ handler, with two arguments, the IRQ number,
and a pointer to the user registers, to handle the specifics.
(we subtract one because the first NMI has code 1). */
- addi FIRST_NMI - 1, r6, r6;
+ addi FIRST_NMI - 1, r6, r6
jarl CSYM(handle_irq), lp
RETURN(NMI)
diff -ruN -X../cludes linux-2.5.62-uc0.orig/arch/v850/kernel/intv.S linux-2.5.62-uc0/arch/v850/kernel/intv.S
--- linux-2.5.62-uc0.orig/arch/v850/kernel/intv.S 2002-11-28 10:24:54.000000000 +0900
+++ linux-2.5.62-uc0/arch/v850/kernel/intv.S 2003-02-18 11:41:09.000000000 +0900
@@ -1,8 +1,8 @@
/*
* arch/v850/kernel/intv.S -- Interrupt vectors
*
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <[email protected]>
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <[email protected]>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
@@ -40,22 +40,19 @@
/* Generic interrupt vectors. */
.section .intv.common, "ax"
.balign 0x10
- JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // NMI0
+ JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // 0x10 - NMI0
.balign 0x10
- JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // NMI1
+ JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // 0x20 - NMI1
.balign 0x10
- JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // NMI2
+ JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP) // 0x30 - NMI2
.balign 0x10
- JUMP_TO_HANDLER (trap, ENTRY_SP) // TRAP0n
+ JUMP_TO_HANDLER (trap, ENTRY_SP) // 0x40 - TRAP0n
.balign 0x10
- JUMP_TO_HANDLER (trap, ENTRY_SP) // TRAP1n
+ JUMP_TO_HANDLER (trap, ENTRY_SP) // 0x50 - TRAP1n
.balign 0x10
- JUMP_TO_HANDLER (irq, ENTRY_SP) // illegal insn trap
-
- .balign 0x10
- JUMP_TO_HANDLER (irq, ENTRY_SP) // DBTRAP insn
+ JUMP_TO_HANDLER (dbtrap, ENTRY_SP) // 0x60 - Illegal op / DBTRAP insn
/* Hardware interrupt vectors. */