Hi all,
I am running 2.4.21-rc2-ac2 with a radeonfb and dri. If ACPI is
enabled the power of 2.4 GHz Intel i686 is reduced to minimum the half.
The acpi modules of 2.4.20 are working perfect in that constellation.
(Need that for power off at shutdown). DRI and XF86 4.3.0 are
running much better than the ati-drivers.
BTW: Which kernel-params do I need to start radeonfb with
video:radeonfb=1280x1024-16@75 ? The FB even starts with
colour frame buffer device 80x30.
Any hints?
Ciao
Elimar
--
Never make anything simple and efficient when a way
can be found to make it complex and wonderful ;-)
On Thu, May 15, 2003 at 09:50:25PM +0200, Elimar Riesebieter wrote:
> BTW: Which kernel-params do I need to start radeonfb with
> video:radeonfb=1280x1024-16@75 ? The FB even starts with
> colour frame buffer device 80x30.
./home/deimos. # cat /etc/lilo.conf | grep radeon
append="video=radeon:1024x768-32@100 hdb=ide-scsi"
./home/deimos. #
P.S. For 2.5.x Use _radeonfb_
--
# Damian *dEiMoS* Ko?kowski # http://deimos.one.pl/ #
On Fri, 16 May 2003 the mental interface of
Damian Ko?kowski told:
> On Thu, May 15, 2003 at 09:50:25PM +0200, Elimar Riesebieter wrote:
> > BTW: Which kernel-params do I need to start radeonfb with
> > video:radeonfb=1280x1024-16@75 ? The FB even starts with
> > colour frame buffer device 80x30.
>
> ./home/deimos. # cat /etc/lilo.conf | grep radeon
> append="video=radeon:1024x768-32@100 hdb=ide-scsi"
> ./home/deimos. #
This is IMHO fo r ppc's. I am running an i86-32.
I do /usr/sbin/fbset -a -fb /dev/fb0 1280x1024-75. Thats what I
want. That doesn't depend on whether I am booting radeon or
radeonfb in 2.4.20/2.4.21-rc1.
Ciao and thx
Elimar
--
Learned men are the cisterns of knowledge,
not the fountainheads ;-)