Hello
I need to tell kernel that e. g. eth0 is a point-to-point link and that every
ethernet frame should be treated this way:
1) Replace destination MAC with MAC of the eth0 network card
2) Process as normally
I tried to set up promisc mode but it seems to not work - it looks like the
frames are intercepted, however are not treated as destinated for my host (are
not forwared etc.)
Cl<
Try ebtables (http://ebtables.sourceforge.net/). You'll need to add
eth0 to a bridge first, though.
--Andy
Karel Kulhav? wrote:
> Hello
>
> I need to tell kernel that e. g. eth0 is a point-to-point link and that every
> ethernet frame should be treated this way:
> 1) Replace destination MAC with MAC of the eth0 network card
> 2) Process as normally
>
> I tried to set up promisc mode but it seems to not work - it looks like the
> frames are intercepted, however are not treated as destinated for my host (are
> not forwared etc.)
>
> Cl<
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/