Before artsd used to send audio data mostly in 4k chunks.
Now it feeds /dev/dsp with tiny ~300 byte pieces.
As a result, artsd heavily hogs CPU at KDE startup
and after every KDE sound for 40+ seconds.
Mouse is very jerky even in framebuffer console,
not only in X, typed characters visibly lag behind
keypresses etc...
My KDE is 3.1.4.
bash-2.05b# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 20)
00:0a.0 Network controller: Harris Semiconductor: Unknown device 3890 (rev 01)
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15)
bash-2.05b# lsmod
Module Size Used by
snd_pcm_oss 53124 1
snd_mixer_oss 19328 1 snd_pcm_oss
snd_via82xx 24704 1
snd_pcm 93824 2 snd_pcm_oss,snd_via82xx
snd_timer 25088 1 snd_pcm
snd_ac97_codec 57860 1 snd_via82xx
snd_page_alloc 12420 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7680 1 snd_via82xx
snd_rawmidi 24320 1 snd_mpu401_uart
snd_seq_device 8580 1 snd_rawmidi
snd 53508 9 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9696 2 snd
iptable_mangle 2944 0
iptable_filter 2816 0
autofs 15616 1
ip_nat_irc 4208 0
ip_conntrack_irc 71316 1 ip_nat_irc
ip_nat_ftp 4848 0
iptable_nat 23332 2 ip_nat_irc,ip_nat_ftp
ip_tables 17936 3 iptable_mangle,iptable_filter,iptable_nat
ip_conntrack_ftp 71956 1 ip_nat_ftp
ip_conntrack 32288 5 ip_nat_irc,ip_conntrack_irc,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
I collected straces of artsd with this script:
#!/bin/sh
i=0; while true; do
pid=`pidof artsd`
test "$pid" || continue
cmd="strace -tt -p $pid"
echo "$cmd"
$cmd 2>&1
echo "Exit code: $?"
test "$?" != 0 && exit
i=$((i+1)); done \
| tee `date +'%H:%M:%S'`
(Don't know why but strace exits when it sees SIGALARM
in artsd, is that normal?? Script was needed in order to
restart strace)
Gzipped straces for 2.6.2 and 2.6.4-rc2-bk3 are attached.
I tested those kernels and only later did binary search.
BTW, logs are abridged, grep for "<--- snipped .... --->".
2.6.4-rc2-bk3 log was over 170Mb in size....
Look here, it's 2.6.4:
20:09:02.444349 gettimeofday({1078682942, 444403}, NULL) = 0
20:09:02.444487 gettimeofday({1078682942, 444525}, NULL) = 0
20:09:02.444584 select(9, [3 5], [8], [5 8], {0, 97304}) = 1 (out [8], left {0, 98000})
20:09:02.445035 gettimeofday({1078682942, 445104}, NULL) = 0
20:09:02.445216 gettimeofday({1078682942, 445261}, NULL) = 0
20:09:02.445362 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff7b0) = 0
20:09:02.445482 write(8, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 344) = 344
20:09:02.445636 gettimeofday({1078682942, 445674}, NULL) = 0
20:09:02.445747 gettimeofday({1078682942, 445784}, NULL) = 0
<--- snipped ~212000 lines including several ALARM signals --->
20:10:14.135608 select(10, [3 5 9], [8], [5 8 9], {0, 6279}) = 1 (out [8], left {0, 7000})
20:10:14.136045 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff7b0) = 0
20:10:14.136193 write(8, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 164) = 164
20:10:14.136345 gettimeofday({1078683014, 136382}, NULL) = 0
20:10:14.136452 gettimeofday({1078683014, 136488}, NULL) = 0
20:10:14.136548 select(10, [3 5 9], [8], [5 8 9], {0, 5341}) = 1 (out [8], left {0, 6000})
20:10:14.136863 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff7b0) = 0
20:10:14.137526 write(8, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 220) = 220
20:10:14.137714 gettimeofday({1078683014, 137752}, NULL) = 0
20:10:14.137829 gettimeofday({1078683014, 137866}, NULL) = 0
20:10:14.137955 select(10, [3 5 9], [8], [5 8 9], {0, 3963}) = 1 (out [8], left {0, 4000})
20:10:14.138293 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff7b0) = 0
20:10:14.138402 write(8, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 172) = 172
20:10:14.138564 gettimeofday({1078683014, 138601}, NULL) = 0
20:10:14.138666 gettimeofday({1078683014, 138702}, NULL) = 0
20:10:14.138760 select(10, [3 5 9], [8], [5 8 9], {0, 3127}) = 1 (out [8], left {0, 4000})
20:10:14.139108 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff7b0) = 0
20:10:14.139212 write(8, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 144) = 144
versus 2.6.2:
20:23:59.400884 select(10, [3 5 9], [8], [5 8 9], {0, 116000}) = 1 (out [8], left {0, 95000})
sleeps 0.02 seconds before sending another 4k -> good, does not hog CPU.
In 2.6.4 there are no such sleeps.
20:23:59.423682 lseek(10, 93212, SEEK_SET) = 93212
20:23:59.423763 read(10, "\177\22\264\22\317\22\377\0224\23?\23\332\22\375\21\352"..., 288) = 288
20:23:59.423938 lseek(10, 93468, SEEK_SET) = 93468
20:23:59.423979 read(10, "k\2\223\2Y\2\351\1X\1\256\0\23\0\207\377\340\376\v\376"..., 288) = 288
20:23:59.427337 gettimeofday({1078683839, 427407}, NULL) = 0
20:23:59.427956 lseek(10, 93724, SEEK_SET) = 93724
20:23:59.428096 read(10, "\221\7\237\7j\7\10\7\243\6R\6\26\6\350\5\274\5v\5 \5\6"..., 288) = 288
20:23:59.428292 lseek(10, 93980, SEEK_SET) = 93980
20:23:59.428336 read(10, "G\363\227\362|\362\304\362\20\363=\363o\363\277\363\21"..., 288) = 288
20:23:59.431090 gettimeofday({1078683839, 431208}, NULL) = 0
20:23:59.431371 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff780) = 0
20:23:59.431757 write(8, ")\23)\23\2\23\2\23\250\22\250\22A\22A\22\265\21\265\021"..., 4096) = 4096
<--- skipped ~4000 lines including several ALARM events --->
20:24:05.509120 gettimeofday({1078683845, 509158}, NULL) = 0
20:24:05.509271 gettimeofday({1078683845, 509312}, NULL) = 0
20:24:05.509374 select(10, [3 5 9], [8], [5 8 9], {0, 6972}) = 0 (Timeout)
20:24:05.516275 gettimeofday({1078683845, 516313}, NULL) = 0
20:24:05.516399 gettimeofday({1078683845, 516437}, NULL) = 0
20:24:05.516497 select(10, [3 5 9], [8], [5 8 9], {0, 199847}) = 1 (out [8], left {0, 187000})
sleeps again
20:24:05.530118 lseek(10, 362524, SEEK_SET) = 362524
20:24:05.530281 read(10, "\363\377\362\377\371\377\367\377\372\377\372\377\373\377"..., 288) = 288
20:24:05.530482 lseek(10, 362780, SEEK_SET) = 362780
20:24:05.530579 read(10, "\355\377\360\377\361\377\362\377\363\377\363\377\365\377"..., 288) = 288
20:24:05.530816 gettimeofday({1078683845, 530873}, NULL) = 0
20:24:05.531000 lseek(10, 363036, SEEK_SET) = 363036
20:24:05.531110 read(10, "3\0001\0-\0-\0.\0000\0/\0,\0)\0&\0&\0\'\0&\0$\0!\0 \0"..., 288) = 288
20:24:05.531344 lseek(10, 363292, SEEK_SET) = 363292
20:24:05.531445 read(10, "\375\377\376\377\371\377\371\377\370\377\371\377\373\377"..., 288) = 288
20:24:05.531668 brk(0x8185000) = 0x8185000
20:24:05.531833 gettimeofday({1078683845, 531879}, NULL) = 0
20:24:05.531953 ioctl(8, SNDCTL_DSP_GETOSPACE, 0xbffff780) = 0
20:24:05.532093 write(8, "\373\377\373\377\373\377\373\377\372\377\372\377\370\377"..., 4096) = 4096
What is at fault, ALSA changes or artsd?
--
vda