Hello!!!
I am sorry for the letter, but allow to address to you with my problem.
Has bought Promise SX-6000 Pro the controller and has established on him
Linux Redhat. All - is excellent!! Has updated a nucleus for 2.6.5 - I
can not pick up the controller in any way. Source codes of a nucleus
taking place on your site do not approach for 2.6 nucleus :(
Can you know the possible decision of my problem??
Yours faithfully and hope, Alexey.
P.S.1 firmware drivers for 2.4.x kernel download is
http://www.eventus.de/linux.html
P.S.2
In make menuconfig has disconnected support of all PDC Promise. Has
included all I2O devices in a nucleus.
ns linux # cat .config|grep I2O
# I2O device support
CONFIG_I2O=y
CONFIG_I2O_PCI=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
dmesg send 0 i2o controllers
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 17
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
chain_pool: 0 bytes @ f7ae85a0
(512 byte buffers X 4 can_queue X 0 i2o controllers)
lspci:
02:02.1 Class ff00: Intel Corp. 80960RM [i960RM Microprocessor] (rev 02)
(prog-if 01)
Subsystem: Promise Technology, Inc. SuperTrak SX6000 I2O CPU
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at f6000000 (32-bit, prefetchable) [size=4M]
Expansion ROM at <unassigned> [disabled] [size=64K]
I can also confirm that this card doesn't work in 2.6 when using the generic
i2o drivers.
Matt H.
On Thursday 15 April 2004 10:36 pm, you wrote:
> Hello!!!
>
> I am sorry for the letter, but allow to address to you with my problem.
> Has bought Promise SX-6000 Pro the controller and has established on him
> Linux Redhat. All - is excellent!! Has updated a nucleus for 2.6.5 - I
> can not pick up the controller in any way. Source codes of a nucleus
> taking place on your site do not approach for 2.6 nucleus :(
>
> Can you know the possible decision of my problem??
>
> Yours faithfully and hope, Alexey.
>
> P.S.1 firmware drivers for 2.4.x kernel download is
> http://www.eventus.de/linux.html
>
> P.S.2
>
> In make menuconfig has disconnected support of all PDC Promise. Has
> included all I2O devices in a nucleus.
>
> ns linux # cat .config|grep I2O
> # I2O device support
> CONFIG_I2O=y
> CONFIG_I2O_PCI=y
> CONFIG_I2O_BLOCK=y
> CONFIG_I2O_SCSI=y
> CONFIG_I2O_PROC=y
>
>
> dmesg send 0 i2o controllers
>
> I2O Core - (C) Copyright 1999 Red Hat Software
> I2O: Event thread created as pid 17
> i2o: Checking for PCI I2O controllers...
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> I2O Block Storage OSM v0.9
> (c) Copyright 1999-2001 Red Hat Software.
> i2o_block: Checking for Boot device...
> i2o_block: Checking for I2O Block devices...
> i2o_scsi.c: Version 0.1.2
> chain_pool: 0 bytes @ f7ae85a0
> (512 byte buffers X 4 can_queue X 0 i2o controllers)
>
>
> lspci:
>
> 02:02.1 Class ff00: Intel Corp. 80960RM [i960RM Microprocessor] (rev 02)
> (prog-if 01)
> Subsystem: Promise Technology, Inc. SuperTrak SX6000 I2O CPU
> Flags: bus master, medium devsel, latency 32, IRQ 22
> Memory at f6000000 (32-bit, prefetchable) [size=4M]
> Expansion ROM at <unassigned> [disabled] [size=64K]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/