[patch 1/7] s390: default configuration.
From: Martin Schwidefsky <[email protected]>
Update default configuration of s390.
Signed-off-by: Martin Schwidefsky <[email protected]>
diffstat:
arch/s390/defconfig | 36 +++++++++++++++++++++++++-----------
1 files changed, 25 insertions(+), 11 deletions(-)
diff -urpN linux-2.6/arch/s390/defconfig linux-2.6-patched/arch/s390/defconfig
--- linux-2.6/arch/s390/defconfig 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6-patched/arch/s390/defconfig 2005-09-14 16:48:14.000000000 +0200
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc4
-# Fri Jul 29 14:49:30 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 16:46:19 2005
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -33,6 +34,7 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -94,6 +96,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
#
# I/O subsystem configuration
@@ -151,8 +154,8 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
@@ -165,6 +168,11 @@ CONFIG_IPV6=y
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -217,9 +225,11 @@ CONFIG_NET_CLS_POLICE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
# CONFIG_PCMCIA is not set
#
@@ -233,6 +243,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -260,6 +271,7 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -280,7 +292,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -384,6 +395,10 @@ CONFIG_EQUALIZER=m
CONFIG_TUN=m
#
+# PHY device support
+#
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -453,10 +468,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -465,6 +476,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -485,11 +497,10 @@ CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -533,6 +544,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -572,6 +584,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
@@ -626,5 +639,6 @@ CONFIG_CRYPTO=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
I'd propose that these:
s390-default-configuration.patch
s390-bl_dev-array-size.patch
s390-crypto-driver-patch-take-2.patch
s390-show_cpuinfo-fix.patch
s390-diag-0x308-reipl.patch
are 2.6.14 material whereas these:
s390-3270-fullscreen-view.patch
s390-ipl-device.patch
aren't (at least, yet). I've asked Greg to take a look at the sysfs stuff
in the last two patches.
OK?
On Wed, 2005-09-14 at 22:16 -0700, Andrew Morton wrote:
> I'd propose that these:
>
> s390-default-configuration.patch
> s390-bl_dev-array-size.patch
> s390-crypto-driver-patch-take-2.patch
> s390-show_cpuinfo-fix.patch
> s390-diag-0x308-reipl.patch
>
> are 2.6.14 material whereas these:
>
> s390-3270-fullscreen-view.patch
> s390-ipl-device.patch
>
> aren't (at least, yet). I've asked Greg to take a look at the sysfs stuff
> in the last two patches.
>
> OK?
Whatever you think is best. The 3270 patch is largeish and the
ipl-device patch introduces a new sysfs interface. Both are good reasons
for not including them into 2.6.14.
--
blue skies,
Martin
Martin Schwidefsky
Linux for zSeries Development & Services
IBM Deutschland Entwicklung GmbH