- remove __{,test_and_}{set,clear,change}_bit() and test_bit()
- unless defined(CONFIG_CPU_MIPS32) or defined(CONFIG_CPU_MIPS64)
- remove __ffs()
- remove ffs()
- remove ffz()
- remove fls()
- remove fls64()
- remove find_{next,first}{,_zero}_bit()
- remove sched_find_first_bit()
- remove generic_hweight64()
- remove generic_hweight{32,16,8}()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove ext2_{set,clear}_bit_atomic()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()
Signed-off-by: Akinobu Mita <[email protected]>
arch/mips/Kconfig | 8
include/asm-mips/bitops.h | 465 +---------------------------------------------
2 files changed, 24 insertions(+), 449 deletions(-)
Index: 2.6-rc/include/asm-mips/bitops.h
===================================================================
--- 2.6-rc.orig/include/asm-mips/bitops.h
+++ 2.6-rc/include/asm-mips/bitops.h
@@ -105,22 +105,6 @@ static inline void set_bit(unsigned long
}
/*
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __set_bit(unsigned long nr, volatile unsigned long * addr)
-{
- unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-
- *m |= 1UL << (nr & SZLONG_MASK);
-}
-
-/*
* clear_bit - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
@@ -169,22 +153,6 @@ static inline void clear_bit(unsigned lo
}
/*
- * __clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * Unlike clear_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __clear_bit(unsigned long nr, volatile unsigned long * addr)
-{
- unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-
- *m &= ~(1UL << (nr & SZLONG_MASK));
-}
-
-/*
* change_bit - Toggle a bit in memory
* @nr: Bit to change
* @addr: Address to start counting from
@@ -235,22 +203,6 @@ static inline void change_bit(unsigned l
}
/*
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __change_bit(unsigned long nr, volatile unsigned long * addr)
-{
- unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-
- *m ^= 1UL << (nr & SZLONG_MASK);
-}
-
-/*
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
@@ -321,30 +273,6 @@ static inline int test_and_set_bit(unsig
}
/*
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static inline int __test_and_set_bit(unsigned long nr,
- volatile unsigned long *addr)
-{
- volatile unsigned long *a = addr;
- unsigned long mask;
- int retval;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << (nr & SZLONG_MASK);
- retval = (mask & *a) != 0;
- *a |= mask;
-
- return retval;
-}
-
-/*
* test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to clear
* @addr: Address to count from
@@ -417,30 +345,6 @@ static inline int test_and_clear_bit(uns
}
/*
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static inline int __test_and_clear_bit(unsigned long nr,
- volatile unsigned long * addr)
-{
- volatile unsigned long *a = addr;
- unsigned long mask;
- int retval;
-
- a += (nr >> SZLONG_LOG);
- mask = 1UL << (nr & SZLONG_MASK);
- retval = ((mask & *a) != 0);
- *a &= ~mask;
-
- return retval;
-}
-
-/*
* test_and_change_bit - Change a bit and return its old value
* @nr: Bit to change
* @addr: Address to count from
@@ -509,43 +413,11 @@ static inline int test_and_change_bit(un
}
}
-/*
- * __test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static inline int __test_and_change_bit(unsigned long nr,
- volatile unsigned long *addr)
-{
- volatile unsigned long *a = addr;
- unsigned long mask;
- int retval;
-
- a += (nr >> SZLONG_LOG);
- mask = 1UL << (nr & SZLONG_MASK);
- retval = ((mask & *a) != 0);
- *a ^= mask;
-
- return retval;
-}
-
#undef __bi_flags
#undef __bi_local_irq_save
#undef __bi_local_irq_restore
-/*
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static inline int test_bit(unsigned long nr, const volatile unsigned long *addr)
-{
- return 1UL & (addr[nr >> SZLONG_LOG] >> (nr & SZLONG_MASK));
-}
+#include <asm-generic/bitops/non-atomic.h>
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
@@ -580,6 +452,8 @@ static inline int __ilog2(unsigned long
return 63 - lz;
}
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
/*
* __ffs - find first bit in word.
* @word: The word to search
@@ -589,31 +463,7 @@ static inline int __ilog2(unsigned long
*/
static inline unsigned long __ffs(unsigned long word)
{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
return __ilog2(word & -word);
-#else
- int b = 0, s;
-
-#ifdef CONFIG_32BIT
- s = 16; if (word << 16 != 0) s = 0; b += s; word >>= s;
- s = 8; if (word << 24 != 0) s = 0; b += s; word >>= s;
- s = 4; if (word << 28 != 0) s = 0; b += s; word >>= s;
- s = 2; if (word << 30 != 0) s = 0; b += s; word >>= s;
- s = 1; if (word << 31 != 0) s = 0; b += s;
-
- return b;
-#endif
-#ifdef CONFIG_64BIT
- s = 32; if (word << 32 != 0) s = 0; b += s; word >>= s;
- s = 16; if (word << 48 != 0) s = 0; b += s; word >>= s;
- s = 8; if (word << 56 != 0) s = 0; b += s; word >>= s;
- s = 4; if (word << 60 != 0) s = 0; b += s; word >>= s;
- s = 2; if (word << 62 != 0) s = 0; b += s; word >>= s;
- s = 1; if (word << 63 != 0) s = 0; b += s;
-
- return b;
-#endif
-#endif
}
/*
@@ -652,321 +502,38 @@ static inline unsigned long ffz(unsigned
*/
static inline unsigned long fls(unsigned long word)
{
-#ifdef CONFIG_32BIT
#ifdef CONFIG_CPU_MIPS32
__asm__ ("clz %0, %1" : "=r" (word) : "r" (word));
return 32 - word;
-#else
- {
- int r = 32, s;
-
- if (word == 0)
- return 0;
-
- s = 16; if ((word & 0xffff0000)) s = 0; r -= s; word <<= s;
- s = 8; if ((word & 0xff000000)) s = 0; r -= s; word <<= s;
- s = 4; if ((word & 0xf0000000)) s = 0; r -= s; word <<= s;
- s = 2; if ((word & 0xc0000000)) s = 0; r -= s; word <<= s;
- s = 1; if ((word & 0x80000000)) s = 0; r -= s;
-
- return r;
- }
#endif
-#endif /* CONFIG_32BIT */
-#ifdef CONFIG_64BIT
#ifdef CONFIG_CPU_MIPS64
-
__asm__ ("dclz %0, %1" : "=r" (word) : "r" (word));
return 64 - word;
-#else
- {
- int r = 64, s;
-
- if (word == 0)
- return 0;
-
- s = 32; if ((word & 0xffffffff00000000UL)) s = 0; r -= s; word <<= s;
- s = 16; if ((word & 0xffff000000000000UL)) s = 0; r -= s; word <<= s;
- s = 8; if ((word & 0xff00000000000000UL)) s = 0; r -= s; word <<= s;
- s = 4; if ((word & 0xf000000000000000UL)) s = 0; r -= s; word <<= s;
- s = 2; if ((word & 0xc000000000000000UL)) s = 0; r -= s; word <<= s;
- s = 1; if ((word & 0x8000000000000000UL)) s = 0; r -= s;
-
- return r;
- }
#endif
-#endif /* CONFIG_64BIT */
}
-#define fls64(x) generic_fls64(x)
-
-/*
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline unsigned long find_next_zero_bit(const unsigned long *addr,
- unsigned long size, unsigned long offset)
-{
- const unsigned long *p = addr + (offset >> SZLONG_LOG);
- unsigned long result = offset & ~SZLONG_MASK;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= SZLONG_MASK;
- if (offset) {
- tmp = *(p++);
- tmp |= ~0UL >> (_MIPS_SZLONG-offset);
- if (size < _MIPS_SZLONG)
- goto found_first;
- if (~tmp)
- goto found_middle;
- size -= _MIPS_SZLONG;
- result += _MIPS_SZLONG;
- }
- while (size & ~SZLONG_MASK) {
- if (~(tmp = *(p++)))
- goto found_middle;
- result += _MIPS_SZLONG;
- size -= _MIPS_SZLONG;
- }
- if (!size)
- return result;
- tmp = *p;
-
-found_first:
- tmp |= ~0UL << size;
- if (tmp == ~0UL) /* Are any bits zero? */
- return result + size; /* Nope. */
-found_middle:
- return result + ffz(tmp);
-}
+#else
-#define find_first_zero_bit(addr, size) \
- find_next_zero_bit((addr), (size), 0)
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
-/*
- * find_next_bit - find the next set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline unsigned long find_next_bit(const unsigned long *addr,
- unsigned long size, unsigned long offset)
-{
- const unsigned long *p = addr + (offset >> SZLONG_LOG);
- unsigned long result = offset & ~SZLONG_MASK;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= SZLONG_MASK;
- if (offset) {
- tmp = *(p++);
- tmp &= ~0UL << offset;
- if (size < _MIPS_SZLONG)
- goto found_first;
- if (tmp)
- goto found_middle;
- size -= _MIPS_SZLONG;
- result += _MIPS_SZLONG;
- }
- while (size & ~SZLONG_MASK) {
- if ((tmp = *(p++)))
- goto found_middle;
- result += _MIPS_SZLONG;
- size -= _MIPS_SZLONG;
- }
- if (!size)
- return result;
- tmp = *p;
-
-found_first:
- tmp &= ~0UL >> (_MIPS_SZLONG - size);
- if (tmp == 0UL) /* Are any bits set? */
- return result + size; /* Nope. */
-found_middle:
- return result + __ffs(tmp);
-}
+#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
-/*
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-#define find_first_bit(addr, size) \
- find_next_bit((addr), (size), 0)
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
#ifdef __KERNEL__
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(const unsigned long *b)
-{
-#ifdef CONFIG_32BIT
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(b[1]))
- return __ffs(b[1]) + 32;
- if (unlikely(b[2]))
- return __ffs(b[2]) + 64;
- if (b[3])
- return __ffs(b[3]) + 96;
- return __ffs(b[4]) + 128;
-#endif
-#ifdef CONFIG_64BIT
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(b[1]))
- return __ffs(b[1]) + 64;
- return __ffs(b[2]) + 128;
-#endif
-}
-
-/*
- * hweightN - returns the hamming weight of a N-bit word
- * @x: the word to weigh
- *
- * The Hamming Weight of a number is the total number of bits set in it.
- */
-
-#define hweight64(x) generic_hweight64(x)
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
-
-static inline int __test_and_set_le_bit(unsigned long nr, unsigned long *addr)
-{
- unsigned char *ADDR = (unsigned char *) addr;
- int mask, retval;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
- retval = (mask & *ADDR) != 0;
- *ADDR |= mask;
-
- return retval;
-}
-
-static inline int __test_and_clear_le_bit(unsigned long nr, unsigned long *addr)
-{
- unsigned char *ADDR = (unsigned char *) addr;
- int mask, retval;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
- retval = (mask & *ADDR) != 0;
- *ADDR &= ~mask;
-
- return retval;
-}
-
-static inline int test_le_bit(unsigned long nr, const unsigned long * addr)
-{
- const unsigned char *ADDR = (const unsigned char *) addr;
- int mask;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
-
- return ((mask & *ADDR) != 0);
-}
-
-static inline unsigned long find_next_zero_le_bit(unsigned long *addr,
- unsigned long size, unsigned long offset)
-{
- unsigned long *p = ((unsigned long *) addr) + (offset >> SZLONG_LOG);
- unsigned long result = offset & ~SZLONG_MASK;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= SZLONG_MASK;
- if (offset) {
- tmp = cpu_to_lelongp(p++);
- tmp |= ~0UL >> (_MIPS_SZLONG-offset); /* bug or feature ? */
- if (size < _MIPS_SZLONG)
- goto found_first;
- if (~tmp)
- goto found_middle;
- size -= _MIPS_SZLONG;
- result += _MIPS_SZLONG;
- }
- while (size & ~SZLONG_MASK) {
- if (~(tmp = cpu_to_lelongp(p++)))
- goto found_middle;
- result += _MIPS_SZLONG;
- size -= _MIPS_SZLONG;
- }
- if (!size)
- return result;
- tmp = cpu_to_lelongp(p);
-
-found_first:
- tmp |= ~0UL << size;
- if (tmp == ~0UL) /* Are any bits zero? */
- return result + size; /* Nope. */
-
-found_middle:
- return result + ffz(tmp);
-}
-
-#define find_first_zero_le_bit(addr, size) \
- find_next_zero_le_bit((addr), (size), 0)
-
-#define ext2_set_bit(nr,addr) \
- __test_and_set_le_bit((nr),(unsigned long*)addr)
-#define ext2_clear_bit(nr, addr) \
- __test_and_clear_le_bit((nr),(unsigned long*)addr)
- #define ext2_set_bit_atomic(lock, nr, addr) \
-({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_set_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
-})
-
-#define ext2_clear_bit_atomic(lock, nr, addr) \
-({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_clear_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
-})
-#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr)
-#define ext2_find_first_zero_bit(addr, size) \
- find_first_zero_le_bit((unsigned long*)addr, size)
-#define ext2_find_next_zero_bit(addr, size, off) \
- find_next_zero_le_bit((unsigned long*)addr, size, off)
-
-/*
- * Bitmap functions for the minix filesystem.
- *
- * FIXME: These assume that Minix uses the native byte/bitorder.
- * This limits the Minix filesystem's value for data exchange very much.
- */
-#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
-#define minix_set_bit(nr,addr) __set_bit(nr,addr)
-#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr) test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */
Index: 2.6-rc/arch/mips/Kconfig
===================================================================
--- 2.6-rc.orig/arch/mips/Kconfig
+++ 2.6-rc/arch/mips/Kconfig
@@ -800,6 +800,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
--