From: Michael Holzheu <[email protected]>
memcpy_real uses the mvcle instruction. This instruction alters all used
registers (source, destination and 2 x count). Therefore we have to flag
those registers as input/output registers (+d). In addition to that, we
have to specify, that we read from memory designated by "src" and write to
memory designated by "dest".
Signed-off-by: Michael Holzheu <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
---
drivers/s390/char/zcore.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
Index: quilt-2.6/drivers/s390/char/zcore.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/zcore.c
+++ quilt-2.6/drivers/s390/char/zcore.c
@@ -141,15 +141,16 @@ static int memcpy_real(void *dest, unsig
if (count == 0)
return 0;
- flags = __raw_local_irq_stnsm(0xf8); /* switch to real mode */
+ flags = __raw_local_irq_stnsm(0xf8UL); /* switch to real mode */
asm volatile (
"0: mvcle %1,%2,0x0\n"
"1: jo 0b\n"
" lhi %0,0x0\n"
"2:\n"
EX_TABLE(1b,2b)
- : "+d" (rc)
- : "d" (_dest), "d" (_src), "d" (_len1), "d" (_len2)
+ : "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1),
+ "+d" (_len2), "=m" (*((long*)dest))
+ : "m" (*((long*)src))
: "cc", "memory");
__raw_local_irq_ssm(flags);
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.