Add configure support for the new style ColdFire serial driver.
Signed-off-by: Greg Ungerer <[email protected]>
---
diff -Naurp linux-2.6.23-rc1/drivers/serial/Kconfig linux-2.6.23-rc1.platform/drivers/serial/Kconfig
--- linux-2.6.23-rc1/drivers/serial/Kconfig 2007-10-25 10:49:13.000000000 +1000
+++ linux-2.6.23-rc1.platform/drivers/serial/Kconfig 2007-10-30 11:20:44.000000000 +1000
@@ -960,6 +960,30 @@ config SERIAL_COLDFIRE
This driver supports the built-in serial ports of the Motorola ColdFire
family of CPUs.
+config SERIAL_MCF
+ bool "Coldfire serial support (new style driver)"
+ depends on COLDFIRE
+ select SERIAL_CORE
+ help
+ This new serial driver supports the Freescale Coldfire serial ports
+ using the new serial driver subsystem.
+
+config SERIAL_MCF_BAUDRATE
+ int "Default baudrate for Coldfire serial ports"
+ depends on SERIAL_MCF
+ default 19200
+ help
+ This setting lets you define what the default baudrate is for the
+ ColdFire serial ports. The usual default varies from board to board,
+ and this setting is a way of catering for that.
+
+config SERIAL_MCF_CONSOLE
+ bool "Coldfire serial console support"
+ depends on SERIAL_MCF
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a ColdFire internal serial port to be the system console.
+
config SERIAL_68360_SMC
bool "68360 SMC uart support"
depends on M68360