Switch to platform style configuration for 520x ColdFire family UARTs.
Signed-off-by: Greg Ungerer <[email protected]>
---
diff -Naurp linux-2.6.23-rc1/arch/m68knommu/platform/520x/config.c linux-2.6.23-rc1.platform/arch/m68knommu/platform/520x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/520x/config.c 2007-10-25 10:48:36.000000000 +1000
+++ linux-2.6.23-rc1.platform/arch/m68knommu/platform/520x/config.c 2007-10-30 14:18:24.000000000 +1000
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005, Freescale (http://www.freescale.com)
* Copyright (C) 2005, Intec Automation ([email protected])
- * Copyright (C) 1999-2003, Greg Ungerer ([email protected])
+ * Copyright (C) 1999-2007, Greg Ungerer ([email protected])
* Copyright (C) 2001-2003, SnapGear Inc. (http://www.snapgear.com)
*/
@@ -13,9 +13,14 @@
#include <linux/kernel.h>
#include <linux/param.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/machdep.h>
#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
@@ -31,6 +36,82 @@ void coldfire_reset(void);
/***************************************************************************/
+static struct mcf_platform_uart m520x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = MCFINT_VECBASE + MCFINT_UART0,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = MCFINT_VECBASE + MCFINT_UART1,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = MCFINT_VECBASE + MCFINT_UART2,
+ },
+ { },
+};
+
+static struct platform_device m520x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m520x_uart_platform,
+};
+
+static struct platform_device *m520x_devices[] __initdata = {
+ &m520x_uart,
+};
+
+/***************************************************************************/
+
+#define INTC0 (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m520x_uart_init_line(int line, int irq)
+{
+ u32 imr;
+ u16 par;
+ u8 par2;
+
+ writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
+
+ imr = readl(INTC0 + MCFINTC_IMRL);
+ imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+ writel(imr, INTC0 + MCFINTC_IMRL);
+
+ switch (line) {
+ case 0:
+ par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD0 |
+ MCF_GPIO_PAR_UART_PAR_URXD0;
+ writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ break;
+ case 1:
+ par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
+ MCF_GPIO_PAR_UART_PAR_URXD1;
+ writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ break;
+ case 2:
+ par2 = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+ par2 &= ~0x0F;
+ par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+ MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+ writeb(par2, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+ break;
+ }
+}
+
+static void __init m520x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m520x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m520x_uart_init_line(line, m520x_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
/*
* Program the vector to be an auto-vectored.
*/
@@ -42,9 +123,20 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mach_reset = coldfire_reset;
+ m520x_uarts_init();
}
/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/