This is needlessly arch-specific though... some other recent platform updates
have provided the Documentation/gpio.txt interfaces and plan to update them
to use the new gpiolib infrastructure when that hits mainline. That gives a
simpler and more extensible approach to I2C (or SPI, etc) GPIO expanders.
I'd guess this talks to a pcf8575-ish GPIO expander (16 bits) though the
code rather lacks relevant comments...
The GPIO feature here that's not yet in mainline is a userspace interface.
I think that gpiolib will make it a lot easier to offer one of those, since
it maintains a registry that didn't previously exist.
I'm a bit surprised that this doesn't seem to offer kernel interfaces for
GPIOs. There seems to be no way for drivers to use them for input/output
(other than direct register access, which won't work with e.g. leds-gpio
or i2c-gpio) or request_irq(...) for something coming from a GPIO.
The LED stuff, and PWM support, should IMO be managed separately. We have
a LED framework that's preferable to this stuff. PWM is a different issue;
I have a hard time imagining a good generic PWM framework, but maybe that's
because I don't use PWM for anything interesting (like motor control), just
for simple LED/backlight brightness control.
- Dave
> --- /dev/null
> +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
> @@ -0,0 +1,984 @@
> +/*
> + * Artec-3 general port I/O device
> + *
> + * Copyright (c) 2007 Axis Communications AB
> + *
> + * Authors: Bjorn Wesen (initial version)
> + * Ola Knutsson (LED handling)
> + * Johan Adolfsson (read/set directions, write, port G,
> + * port to ETRAX FS.
> + * Ricard Wanderlof (PWM for Artpec-3)
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/ioport.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/fs.h>
> +#include <linux/string.h>
> +#include <linux/poll.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +
> +#include <asm/etraxgpio.h>
> +#include <hwregs/reg_map.h>
> +#include <hwregs/reg_rdwr.h>
> +#include <hwregs/gio_defs.h>
> +#include <hwregs/intr_vect_defs.h>
> +#include <asm/io.h>
> +#include <asm/system.h>
> +#include <asm/irq.h>
> +#include <asm/arch/mach/pinmux.h>
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> +#include "../i2c.h"
> +
> +#define VIRT_I2C_ADDR 0x40
> +#endif
> +
> +/* The following gio ports on ARTPEC-3 is available:
> + * pa 32 bits
> + * pb 32 bits
> + * pc 16 bits
> + * each port has a rw_px_dout, r_px_din and rw_px_oe register.
> + */
> +
> +#define GPIO_MAJOR 120 /* experimental MAJOR number */
> +
> +#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
> +
> +#define D(x)
> +
> +#if 0
> +static int dp_cnt;
> +#define DP(x) \
> + do { \
> + dp_cnt++; \
> + if (dp_cnt % 1000 == 0) \
> + x; \
> + } while (0)
> +#else
> +#define DP(x)
> +#endif
> +
> +static char gpio_name[] = "etrax gpio";
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
> + unsigned long arg);
> +#endif
> +static int gpio_ioctl(struct inode *inode, struct file *file,
> + unsigned int cmd, unsigned long arg);
> +static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
> + loff_t *off);
> +static int gpio_open(struct inode *inode, struct file *filp);
> +static int gpio_release(struct inode *inode, struct file *filp);
> +static unsigned int gpio_poll(struct file *filp,
> + struct poll_table_struct *wait);
> +
> +/* private data per open() of this driver */
> +
> +struct gpio_private {
> + struct gpio_private *next;
> + /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
> + unsigned char clk_mask;
> + unsigned char data_mask;
> + unsigned char write_msb;
> + unsigned char pad1;
> + /* These fields are generic */
> + unsigned long highalarm, lowalarm;
> + wait_queue_head_t alarm_wq;
> + int minor;
> +};
> +
> +static void gpio_set_alarm(struct gpio_private *priv);
> +
> +/* linked list of alarms to check for */
> +
> +static struct gpio_private *alarmlist;
> +
> +static int wanted_interrupts;
> +
> +static DEFINE_SPINLOCK(alarm_lock);
> +
> +#define NUM_PORTS (GPIO_MINOR_LAST+1)
> +#define GIO_REG_RD_ADDR(reg) \
> + (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
> +#define GIO_REG_WR_ADDR(reg) \
> + (volatile unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
> +unsigned long led_dummy;
> +unsigned long port_d_dummy; /* Only input on Artpec-3 */
> +unsigned long port_e_dummy; /* Non existent on Artpec-3 */
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> +static unsigned long virtual_dummy;
> +static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
> +static unsigned short cached_virtual_gpio_read;
> +#endif
> +
> +static volatile unsigned long *data_out[NUM_PORTS] = {
> + GIO_REG_WR_ADDR(rw_pa_dout),
> + GIO_REG_WR_ADDR(rw_pb_dout),
> + &led_dummy,
> + GIO_REG_WR_ADDR(rw_pc_dout),
> + &port_d_dummy,
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + &port_e_dummy,
> + &virtual_dummy,
> +#endif
> +};
> +
> +static volatile unsigned long *data_in[NUM_PORTS] = {
> + GIO_REG_RD_ADDR(r_pa_din),
> + GIO_REG_RD_ADDR(r_pb_din),
> + &led_dummy,
> + GIO_REG_RD_ADDR(r_pc_din),
> + GIO_REG_RD_ADDR(r_pd_din),
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + &port_e_dummy,
> + &virtual_dummy,
> +#endif
> +};
> +
> +static unsigned long changeable_dir[NUM_PORTS] = {
> + CONFIG_ETRAX_PA_CHANGEABLE_DIR,
> + CONFIG_ETRAX_PB_CHANGEABLE_DIR,
> + 0,
> + CONFIG_ETRAX_PC_CHANGEABLE_DIR,
> + 0,
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + 0,
> + CONFIG_ETRAX_PV_CHANGEABLE_DIR,
> +#endif
> +};
> +
> +static unsigned long changeable_bits[NUM_PORTS] = {
> + CONFIG_ETRAX_PA_CHANGEABLE_BITS,
> + CONFIG_ETRAX_PB_CHANGEABLE_BITS,
> + 0,
> + CONFIG_ETRAX_PC_CHANGEABLE_BITS,
> + 0,
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + 0,
> + CONFIG_ETRAX_PV_CHANGEABLE_BITS,
> +#endif
> +};
> +
> +static volatile unsigned long *dir_oe[NUM_PORTS] = {
> + GIO_REG_WR_ADDR(rw_pa_oe),
> + GIO_REG_WR_ADDR(rw_pb_oe),
> + &led_dummy,
> + GIO_REG_WR_ADDR(rw_pc_oe),
> + &port_d_dummy,
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + &port_e_dummy,
> + &virtual_rw_pv_oe,
> +#endif
> +};
> +
> +static void
> +gpio_set_alarm(struct gpio_private *priv)
> +{
> + int bit;
> + int intr_cfg;
> + int mask;
> + int pins;
> + unsigned long flags;
> +
> + local_irq_save(flags);
> + intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
> + pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
> + mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
> +
> + for (bit = 0; bit < 32; bit++) {
> + int intr = bit % 8;
> + int pin = bit / 8;
> + if (priv->minor < GPIO_MINOR_LEDS)
> + pin += priv->minor * 4;
> + else
> + pin += (priv->minor - 1) * 4;
> +
> + if (priv->highalarm & (1<<bit)) {
> + intr_cfg |= (regk_gio_hi << (intr * 3));
> + mask |= 1 << intr;
> + wanted_interrupts = mask & 0xff;
> + pins |= pin << (intr * 4);
> + } else if (priv->lowalarm & (1<<bit)) {
> + intr_cfg |= (regk_gio_lo << (intr * 3));
> + mask |= 1 << intr;
> + wanted_interrupts = mask & 0xff;
> + pins |= pin << (intr * 4);
> + }
> + }
> +
> + REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
> + REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
> + REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
> +
> + local_irq_restore(flags);
> +}
> +
> +static unsigned int
> +gpio_poll(struct file *file, struct poll_table_struct *wait)
> +{
> + unsigned int mask = 0;
> + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> + unsigned long data;
> + unsigned long tmp;
> +
> + if (priv->minor >= GPIO_MINOR_PWM0 &&
> + priv->minor <= GPIO_MINOR_LAST_PWM)
> + return 0;
> +
> + poll_wait(file, &priv->alarm_wq, wait);
> + if (priv->minor <= GPIO_MINOR_D) {
> + data = *data_in[priv->minor];
> + REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
> + tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
> + tmp &= I2C_INTERRUPT_BITS;
> + tmp |= wanted_interrupts;
> + REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
> + } else
> + return 0;
> +
> + if ((data & priv->highalarm) || (~data & priv->lowalarm))
> + mask = POLLIN|POLLRDNORM;
> +
> + DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
> + return mask;
> +}
> +
> +static irqreturn_t
> +gpio_interrupt(int irq, void *dev_id)
> +{
> + reg_gio_rw_intr_mask intr_mask;
> + reg_gio_r_masked_intr masked_intr;
> + reg_gio_rw_ack_intr ack_intr;
> + unsigned long tmp;
> + unsigned long tmp2;
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + unsigned char enable_gpiov_ack = 0;
> +#endif
> +
> + /* Find what PA interrupts are active */
> + masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
> + tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
> +
> + /* Find those that we have enabled */
> + spin_lock(&alarm_lock);
> + tmp &= wanted_interrupts;
> + spin_unlock(&alarm_lock);
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + /* Something changed on virtual GPIO. Interrupt is acked by
> + * reading the device.
> + */
> + if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
> + i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
> + sizeof(cached_virtual_gpio_read));
> + enable_gpiov_ack = 1;
> + }
> +#endif
> +
> + /* Ack them */
> + ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
> + REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
> +
> + /* Disable those interrupts.. */
> + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
> + tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
> + tmp2 &= ~tmp;
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + /* Do not disable interrupt on virtual GPIO. Changes on virtual
> + * pins are only noticed by an interrupt.
> + */
> + if (enable_gpiov_ack)
> + tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> +#endif
> + intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
> + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
> +
> + return IRQ_RETVAL(tmp);
> +}
> +
> +
> +static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
> + loff_t *off)
> +{
> + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> + unsigned char data, clk_mask, data_mask, write_msb;
> + unsigned long flags;
> + unsigned long shadow;
> + volatile unsigned long *port;
> + ssize_t retval = count;
> + /* Only bits 0-7 may be used for write operations but allow all
> + devices except leds... */
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + if (priv->minor == GPIO_MINOR_V)
> + return -EFAULT;
> +#endif
> + if (priv->minor == GPIO_MINOR_LEDS)
> + return -EFAULT;
> +
> + if (priv->minor >= GPIO_MINOR_PWM0 &&
> + priv->minor <= GPIO_MINOR_LAST_PWM)
> + return -EFAULT;
> +
> + if (!access_ok(VERIFY_READ, buf, count))
> + return -EFAULT;
> +
> + clk_mask = priv->clk_mask;
> + data_mask = priv->data_mask;
> + /* It must have been configured using the IO_CFG_WRITE_MODE */
> + /* Perhaps a better error code? */
> + if (clk_mask == 0 || data_mask == 0)
> + return -EPERM;
> +
> + write_msb = priv->write_msb;
> + D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
> + "msb: %i\n",
> + count, data_mask, clk_mask, write_msb));
> + port = data_out[priv->minor];
> +
> + while (count--) {
> + int i;
> + data = *buf++;
> + if (priv->write_msb) {
> + for (i = 7; i >= 0; i--) {
> + local_irq_save(flags);
> + shadow = *port;
> + *port = shadow &= ~clk_mask;
> + if (data & 1<<i)
> + *port = shadow |= data_mask;
> + else
> + *port = shadow &= ~data_mask;
> + /* For FPGA: min 5.0ns (DCC) before CCLK high */
> + *port = shadow |= clk_mask;
> + local_irq_restore(flags);
> + }
> + } else {
> + for (i = 0; i <= 7; i++) {
> + local_irq_save(flags);
> + shadow = *port;
> + *port = shadow &= ~clk_mask;
> + if (data & 1<<i)
> + *port = shadow |= data_mask;
> + else
> + *port = shadow &= ~data_mask;
> + /* For FPGA: min 5.0ns (DCC) before CCLK high */
> + *port = shadow |= clk_mask;
> + local_irq_restore(flags);
> + }
> + }
> + }
> + return retval;
> +}
> +
> +static int
> +gpio_open(struct inode *inode, struct file *filp)
> +{
> + struct gpio_private *priv;
> + int p = iminor(inode);
> +
> + if (p > GPIO_MINOR_LAST_PWM ||
> + (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
> + return -EINVAL;
> +
> + priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
> +
> + if (!priv)
> + return -ENOMEM;
> + memset(priv, 0, sizeof(*priv));
> +
> + priv->minor = p;
> + filp->private_data = (void *)priv;
> +
> + /* initialize the io/alarm struct, not for PWM ports though */
> + if (p <= GPIO_MINOR_LAST) {
> +
> + priv->clk_mask = 0;
> + priv->data_mask = 0;
> + priv->highalarm = 0;
> + priv->lowalarm = 0;
> +
> + init_waitqueue_head(&priv->alarm_wq);
> +
> + /* link it into our alarmlist */
> + spin_lock_irq(&alarm_lock);
> + priv->next = alarmlist;
> + alarmlist = priv;
> + spin_unlock_irq(&alarm_lock);
> + }
> +
> + return 0;
> +}
> +
> +static int
> +gpio_release(struct inode *inode, struct file *filp)
> +{
> + struct gpio_private *p;
> + struct gpio_private *todel;
> + /* local copies while updating them: */
> + unsigned long a_high, a_low;
> +
> + /* prepare to free private structure */
> + todel = (struct gpio_private *)filp->private_data;
> +
> + /* unlink from alarmlist - only for non-PWM ports though */
> + if (todel->minor <= GPIO_MINOR_LAST) {
> + spin_lock_irq(&alarm_lock);
> + p = alarmlist;
> +
> + if (p == todel)
> + alarmlist = todel->next;
> + else {
> + while (p->next != todel)
> + p = p->next;
> + p->next = todel->next;
> + }
> +
> + /* Check if there are still any alarms set */
> + p = alarmlist;
> + a_high = 0;
> + a_low = 0;
> + while (p) {
> + if (p->minor == GPIO_MINOR_A) {
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> +#endif
> + a_high |= p->highalarm;
> + a_low |= p->lowalarm;
> + }
> +
> + p = p->next;
> + }
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + /* Variable 'a_low' needs to be set here again
> + * to ensure that interrupt for virtual GPIO is handled.
> + */
> + a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> +#endif
> +
> + spin_unlock_irq(&alarm_lock);
> + }
> + kfree(todel);
> +
> + return 0;
> +}
> +
> +/* Main device API. ioctl's to read/set/clear bits, as well as to
> + * set alarms to wait for using a subsequent select().
> + */
> +
> +inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
> +{
> + /* Set direction 0=unchanged 1=input,
> + * return mask with 1=input
> + */
> + unsigned long flags;
> + unsigned long dir_shadow;
> +
> + local_irq_save(flags);
> + dir_shadow = *dir_oe[priv->minor];
> + dir_shadow &= ~(arg & changeable_dir[priv->minor]);
> + *dir_oe[priv->minor] = dir_shadow;
> + local_irq_restore(flags);
> +
> + if (priv->minor == GPIO_MINOR_C)
> + dir_shadow ^= 0xFFFF; /* Only 16 bits */
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + else if (priv->minor == GPIO_MINOR_V)
> + dir_shadow ^= 0xFFFF; /* Only 16 bits */
> +#endif
> + else
> + dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
> +
> + return dir_shadow;
> +
> +} /* setget_input */
> +
> +inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
> +{
> + unsigned long flags;
> + unsigned long dir_shadow;
> +
> + local_irq_save(flags);
> + dir_shadow = *dir_oe[priv->minor];
> + dir_shadow |= (arg & changeable_dir[priv->minor]);
> + *dir_oe[priv->minor] = dir_shadow;
> + local_irq_restore(flags);
> + return dir_shadow;
> +} /* setget_output */
> +
> +static int
> +gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
> +
> +static int
> +gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg);
> +
> +static int
> +gpio_ioctl(struct inode *inode, struct file *file,
> + unsigned int cmd, unsigned long arg)
> +{
> + unsigned long flags;
> + unsigned long val;
> + unsigned long shadow;
> + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> +
> + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
> + return -EINVAL;
> +
> + /* Check for special ioctl handlers first */
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + if (priv->minor == GPIO_MINOR_V)
> + return virtual_gpio_ioctl(file, cmd, arg);
> +#endif
> +
> + if (priv->minor == GPIO_MINOR_LEDS)
> + return gpio_leds_ioctl(cmd, arg);
> +
> + if (priv->minor >= GPIO_MINOR_PWM0 &&
> + priv->minor <= GPIO_MINOR_LAST_PWM)
> + return gpio_pwm_ioctl(priv, cmd, arg);
> +
> + switch (_IOC_NR(cmd)) {
> + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
> + /* Read the port. */
> + return *data_in[priv->minor];
> + break;
> + case IO_SETBITS:
> + local_irq_save(flags);
> + /* Set changeable bits with a 1 in arg. */
> + shadow = *data_out[priv->minor];
> + shadow |= (arg & changeable_bits[priv->minor]);
> + *data_out[priv->minor] = shadow;
> + local_irq_restore(flags);
> + break;
> + case IO_CLRBITS:
> + local_irq_save(flags);
> + /* Clear changeable bits with a 1 in arg. */
> + shadow = *data_out[priv->minor];
> + shadow &= ~(arg & changeable_bits[priv->minor]);
> + *data_out[priv->minor] = shadow;
> + local_irq_restore(flags);
> + break;
> + case IO_HIGHALARM:
> + /* Set alarm when bits with 1 in arg go high. */
> + priv->highalarm |= arg;
> + gpio_set_alarm(priv);
> + break;
> + case IO_LOWALARM:
> + /* Set alarm when bits with 1 in arg go low. */
> + priv->lowalarm |= arg;
> + gpio_set_alarm(priv);
> + break;
> + case IO_CLRALARM:
> + /* Clear alarm for bits with 1 in arg. */
> + priv->highalarm &= ~arg;
> + priv->lowalarm &= ~arg;
> + gpio_set_alarm(priv);
> + break;
> + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
> + /* Read direction 0=input 1=output */
> + return *dir_oe[priv->minor];
> + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
> + /* Set direction 0=unchanged 1=input,
> + * return mask with 1=input
> + */
> + return setget_input(priv, arg);
> + break;
> + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
> + /* Set direction 0=unchanged 1=output,
> + * return mask with 1=output
> + */
> + return setget_output(priv, arg);
> +
> + case IO_CFG_WRITE_MODE:
> + {
> + unsigned long dir_shadow;
> + dir_shadow = *dir_oe[priv->minor];
> +
> + priv->clk_mask = arg & 0xFF;
> + priv->data_mask = (arg >> 8) & 0xFF;
> + priv->write_msb = (arg >> 16) & 0x01;
> + /* Check if we're allowed to change the bits and
> + * the direction is correct
> + */
> + if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
> + (priv->data_mask & changeable_bits[priv->minor]) &&
> + (priv->clk_mask & dir_shadow) &&
> + (priv->data_mask & dir_shadow))) {
> + priv->clk_mask = 0;
> + priv->data_mask = 0;
> + return -EPERM;
> + }
> + break;
> + }
> + case IO_READ_INBITS:
> + /* *arg is result of reading the input pins */
> + val = *data_in[priv->minor];
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + return 0;
> + break;
> + case IO_READ_OUTBITS:
> + /* *arg is result of reading the output shadow */
> + val = *data_out[priv->minor];
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + break;
> + case IO_SETGET_INPUT:
> + /* bits set in *arg is set to input,
> + * *arg updated with current input pins.
> + */
> + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> + return -EFAULT;
> + val = setget_input(priv, val);
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + break;
> + case IO_SETGET_OUTPUT:
> + /* bits set in *arg is set to output,
> + * *arg updated with current output pins.
> + */
> + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> + return -EFAULT;
> + val = setget_output(priv, val);
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + break;
> + default:
> + return -EINVAL;
> + } /* switch */
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> +static int
> +virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> +{
> + unsigned long flags;
> + unsigned short val;
> + unsigned short shadow;
> + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> +
> + switch (_IOC_NR(cmd)) {
> + case IO_SETBITS:
> + local_irq_save(flags);
> + /* Set changeable bits with a 1 in arg. */
> + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> + shadow |= ~*dir_oe[priv->minor];
> + shadow |= (arg & changeable_bits[priv->minor]);
> + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> + local_irq_restore(flags);
> + break;
> + case IO_CLRBITS:
> + local_irq_save(flags);
> + /* Clear changeable bits with a 1 in arg. */
> + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> + shadow |= ~*dir_oe[priv->minor];
> + shadow &= ~(arg & changeable_bits[priv->minor]);
> + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> + local_irq_restore(flags);
> + break;
> + case IO_HIGHALARM:
> + /* Set alarm when bits with 1 in arg go high. */
> + priv->highalarm |= arg;
> + break;
> + case IO_LOWALARM:
> + /* Set alarm when bits with 1 in arg go low. */
> + priv->lowalarm |= arg;
> + break;
> + case IO_CLRALARM:
> + /* Clear alarm for bits with 1 in arg. */
> + priv->highalarm &= ~arg;
> + priv->lowalarm &= ~arg;
> + break;
> + case IO_CFG_WRITE_MODE:
> + {
> + unsigned long dir_shadow;
> + dir_shadow = *dir_oe[priv->minor];
> +
> + priv->clk_mask = arg & 0xFF;
> + priv->data_mask = (arg >> 8) & 0xFF;
> + priv->write_msb = (arg >> 16) & 0x01;
> + /* Check if we're allowed to change the bits and
> + * the direction is correct
> + */
> + if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
> + (priv->data_mask & changeable_bits[priv->minor]) &&
> + (priv->clk_mask & dir_shadow) &&
> + (priv->data_mask & dir_shadow))) {
> + priv->clk_mask = 0;
> + priv->data_mask = 0;
> + return -EPERM;
> + }
> + break;
> + }
> + case IO_READ_INBITS:
> + /* *arg is result of reading the input pins */
> + val = cached_virtual_gpio_read;
> + val &= ~*dir_oe[priv->minor];
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + return 0;
> + break;
> + case IO_READ_OUTBITS:
> + /* *arg is result of reading the output shadow */
> + i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
> + val &= *dir_oe[priv->minor];
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + break;
> + case IO_SETGET_INPUT:
> + {
> + /* bits set in *arg is set to input,
> + * *arg updated with current input pins.
> + */
> + unsigned short input_mask = ~*dir_oe[priv->minor];
> + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> + return -EFAULT;
> + val = setget_input(priv, val);
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + if ((input_mask & val) != input_mask) {
> + /* Input pins changed. All ports desired as input
> + * should be set to logic 1.
> + */
> + unsigned short change = input_mask ^ val;
> + i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
> + sizeof(shadow));
> + shadow &= ~change;
> + shadow |= val;
> + i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
> + sizeof(shadow));
> + }
> + break;
> + }
> + case IO_SETGET_OUTPUT:
> + /* bits set in *arg is set to output,
> + * *arg updated with current output pins.
> + */
> + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> + return -EFAULT;
> + val = setget_output(priv, val);
> + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> + return -EFAULT;
> + break;
> + default:
> + return -EINVAL;
> + } /* switch */
> + return 0;
> +}
> +#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
> +
> +static int
> +gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
> +{
> + unsigned char green;
> + unsigned char red;
> +
> + switch (_IOC_NR(cmd)) {
> + case IO_LEDACTIVE_SET:
> + green = ((unsigned char) arg) & 1;
> + red = (((unsigned char) arg) >> 1) & 1;
> + LED_ACTIVE_SET_G(green);
> + LED_ACTIVE_SET_R(red);
> + break;
> +
> + default:
> + return -EINVAL;
> + } /* switch */
> +
> + return 0;
> +}
> +
> +static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
> +{
> + int pinmux_pwm = pinmux_pwm0 + pwm_port;
> + int mode;
> + reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
> + .ccd_val = 0,
> + .ccd_override = regk_gio_no,
> + .mode = regk_gio_no
> + };
> + int allocstatus;
> +
> + if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
> + return -EFAULT;
> + rw_pwm_ctrl.mode = mode;
> + if (mode != PWM_OFF)
> + allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
> + else
> + allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
> + if (allocstatus)
> + return allocstatus;
> + REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
> + 12 * pwm_port, rw_pwm_ctrl);
> + return 0;
> +}
> +
> +static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
> +{
> + struct io_pwm_set_period periods;
> + reg_gio_rw_pwm0_var rw_pwm_widths;
> +
> + if (copy_from_user(&periods, (struct io_pwm_set_period *) arg,
> + sizeof(periods)))
> + return -EFAULT;
> + if (periods.lo > 8191 || periods.hi > 8191)
> + return -EINVAL;
> + rw_pwm_widths.lo = periods.lo;
> + rw_pwm_widths.hi = periods.hi;
> + REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
> + 12 * pwm_port, rw_pwm_widths);
> + return 0;
> +}
> +
> +static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
> +{
> + unsigned int duty;
> + reg_gio_rw_pwm0_data rw_pwm_duty;
> +
> + if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
> + return -EFAULT;
> + if (duty > 255)
> + return -EINVAL;
> + rw_pwm_duty.data = duty;
> + REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
> + 12 * pwm_port, rw_pwm_duty);
> + return 0;
> +}
> +
> +static int
> +gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg)
> +{
> + int pwm_port = priv->minor - GPIO_MINOR_PWM0;
> +
> + switch (_IOC_NR(cmd)) {
> + case IO_PWM_SET_MODE:
> + return gpio_pwm_set_mode(arg, pwm_port);
> + case IO_PWM_SET_PERIOD:
> + return gpio_pwm_set_period(arg, pwm_port);
> + case IO_PWM_SET_DUTY:
> + return gpio_pwm_set_duty(arg, pwm_port);
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +struct file_operations gpio_fops = {
> + .owner = THIS_MODULE,
> + .poll = gpio_poll,
> + .ioctl = gpio_ioctl,
> + .write = gpio_write,
> + .open = gpio_open,
> + .release = gpio_release,
> +};
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> +static void
> +virtual_gpio_init(void)
> +{
> + reg_gio_rw_intr_cfg intr_cfg;
> + reg_gio_rw_intr_mask intr_mask;
> + unsigned short shadow;
> +
> + shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
> + shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
> + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> +
> + /* Set interrupt mask and on what state the interrupt shall trigger.
> + * For virtual gpio the interrupt shall trigger on logic '0'.
> + */
> + intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
> + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
> +
> + switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
> + case 0:
> + intr_cfg.pa0 = regk_gio_lo;
> + intr_mask.pa0 = regk_gio_yes;
> + break;
> + case 1:
> + intr_cfg.pa1 = regk_gio_lo;
> + intr_mask.pa1 = regk_gio_yes;
> + break;
> + case 2:
> + intr_cfg.pa2 = regk_gio_lo;
> + intr_mask.pa2 = regk_gio_yes;
> + break;
> + case 3:
> + intr_cfg.pa3 = regk_gio_lo;
> + intr_mask.pa3 = regk_gio_yes;
> + break;
> + case 4:
> + intr_cfg.pa4 = regk_gio_lo;
> + intr_mask.pa4 = regk_gio_yes;
> + break;
> + case 5:
> + intr_cfg.pa5 = regk_gio_lo;
> + intr_mask.pa5 = regk_gio_yes;
> + break;
> + case 6:
> + intr_cfg.pa6 = regk_gio_lo;
> + intr_mask.pa6 = regk_gio_yes;
> + break;
> + case 7:
> + intr_cfg.pa7 = regk_gio_lo;
> + intr_mask.pa7 = regk_gio_yes;
> + break;
> + }
> +
> + REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
> + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
> +}
> +#endif
> +
> +/* main driver initialization routine, called from mem.c */
> +
> +static __init int
> +gpio_init(void)
> +{
> + int res;
> +
> + /* do the formalities */
> +
> + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
> + if (res < 0) {
> + printk(KERN_ERR "gpio: couldn't get a major number.\n");
> + return res;
> + }
> +
> + /* Clear all leds */
> + LED_NETWORK_GRP0_SET(0);
> + LED_NETWORK_GRP1_SET(0);
> + LED_ACTIVE_SET(0);
> + LED_DISK_READ(0);
> + LED_DISK_WRITE(0);
> +
> + printk(KERN_INFO "ETRAX FS GPIO driver v2.6, (c) 2003-2007 "
> + "Axis Communications AB\n");
> + if (request_irq(GIO_INTR_VECT, gpio_interrupt,
> + IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist))
> + printk(KERN_ERR "err: irq for gpio\n");
> +
> + /* No IRQs by default. */
> + REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
> +
> +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> + virtual_gpio_init();
> +#endif
> +
> + return res;
> +}
> +
> +/* this makes sure that gpio_init is called during kernel boot */
> +
> +module_init(gpio_init);
On Thu, Dec 13, 2007 at 02:30:33PM -0800, David Brownell wrote:
> This is needlessly arch-specific though... some other recent platform updates
> have provided the Documentation/gpio.txt interfaces and plan to update them
> to use the new gpiolib infrastructure when that hits mainline. That gives a
> simpler and more extensible approach to I2C (or SPI, etc) GPIO expanders.
Yes, that might simplify things a lot, I'll take a look at that.
> I'd guess this talks to a pcf8575-ish GPIO expander (16 bits) though the
> code rather lacks relevant comments...
Only the "virtual GPIO" talks to an extender, the rest of the GPIO
uses direct access to memory registers for the ARTPEC-3 (and EtraxFS).
> The GPIO feature here that's not yet in mainline is a userspace interface.
> I think that gpiolib will make it a lot easier to offer one of those, since
> it maintains a registry that didn't previously exist.
>
> I'm a bit surprised that this doesn't seem to offer kernel interfaces for
> GPIOs. There seems to be no way for drivers to use them for input/output
> (other than direct register access, which won't work with e.g. leds-gpio
> or i2c-gpio) or request_irq(...) for something coming from a GPIO.
This is probably due to the old way to handle leds etc was precisely via
register access, and the driver uses those macros to extend the functions
to userspace.
> The LED stuff, and PWM support, should IMO be managed separately.
I suspect that the reason they're handled together is that the same
hardware module implements all three functions.
> We have
> a LED framework that's preferable to this stuff.
Ok, I'll have a look at that to see if we can use it instead.
> PWM is a different issue;
> I have a hard time imagining a good generic PWM framework, but maybe that's
> because I don't use PWM for anything interesting (like motor control), just
> for simple LED/backlight brightness control.
...and motor control is exactly what we use them for.
> - Dave
Thanks for the comments, I'll see what improvements I can come up with.
/Jesper
> > --- /dev/null
> > +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
> > @@ -0,0 +1,984 @@
> > +/*
> > + * Artec-3 general port I/O device
> > + *
> > + * Copyright (c) 2007 Axis Communications AB
> > + *
> > + * Authors: Bjorn Wesen (initial version)
> > + * Ola Knutsson (LED handling)
> > + * Johan Adolfsson (read/set directions, write, port G,
> > + * port to ETRAX FS.
> > + * Ricard Wanderlof (PWM for Artpec-3)
> > + *
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/sched.h>
> > +#include <linux/slab.h>
> > +#include <linux/ioport.h>
> > +#include <linux/errno.h>
> > +#include <linux/kernel.h>
> > +#include <linux/fs.h>
> > +#include <linux/string.h>
> > +#include <linux/poll.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include <asm/etraxgpio.h>
> > +#include <hwregs/reg_map.h>
> > +#include <hwregs/reg_rdwr.h>
> > +#include <hwregs/gio_defs.h>
> > +#include <hwregs/intr_vect_defs.h>
> > +#include <asm/io.h>
> > +#include <asm/system.h>
> > +#include <asm/irq.h>
> > +#include <asm/arch/mach/pinmux.h>
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > +#include "../i2c.h"
> > +
> > +#define VIRT_I2C_ADDR 0x40
> > +#endif
> > +
> > +/* The following gio ports on ARTPEC-3 is available:
> > + * pa 32 bits
> > + * pb 32 bits
> > + * pc 16 bits
> > + * each port has a rw_px_dout, r_px_din and rw_px_oe register.
> > + */
> > +
> > +#define GPIO_MAJOR 120 /* experimental MAJOR number */
> > +
> > +#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
> > +
> > +#define D(x)
> > +
> > +#if 0
> > +static int dp_cnt;
> > +#define DP(x) \
> > + do { \
> > + dp_cnt++; \
> > + if (dp_cnt % 1000 == 0) \
> > + x; \
> > + } while (0)
> > +#else
> > +#define DP(x)
> > +#endif
> > +
> > +static char gpio_name[] = "etrax gpio";
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
> > + unsigned long arg);
> > +#endif
> > +static int gpio_ioctl(struct inode *inode, struct file *file,
> > + unsigned int cmd, unsigned long arg);
> > +static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
> > + loff_t *off);
> > +static int gpio_open(struct inode *inode, struct file *filp);
> > +static int gpio_release(struct inode *inode, struct file *filp);
> > +static unsigned int gpio_poll(struct file *filp,
> > + struct poll_table_struct *wait);
> > +
> > +/* private data per open() of this driver */
> > +
> > +struct gpio_private {
> > + struct gpio_private *next;
> > + /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
> > + unsigned char clk_mask;
> > + unsigned char data_mask;
> > + unsigned char write_msb;
> > + unsigned char pad1;
> > + /* These fields are generic */
> > + unsigned long highalarm, lowalarm;
> > + wait_queue_head_t alarm_wq;
> > + int minor;
> > +};
> > +
> > +static void gpio_set_alarm(struct gpio_private *priv);
> > +
> > +/* linked list of alarms to check for */
> > +
> > +static struct gpio_private *alarmlist;
> > +
> > +static int wanted_interrupts;
> > +
> > +static DEFINE_SPINLOCK(alarm_lock);
> > +
> > +#define NUM_PORTS (GPIO_MINOR_LAST+1)
> > +#define GIO_REG_RD_ADDR(reg) \
> > + (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
> > +#define GIO_REG_WR_ADDR(reg) \
> > + (volatile unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
> > +unsigned long led_dummy;
> > +unsigned long port_d_dummy; /* Only input on Artpec-3 */
> > +unsigned long port_e_dummy; /* Non existent on Artpec-3 */
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > +static unsigned long virtual_dummy;
> > +static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
> > +static unsigned short cached_virtual_gpio_read;
> > +#endif
> > +
> > +static volatile unsigned long *data_out[NUM_PORTS] = {
> > + GIO_REG_WR_ADDR(rw_pa_dout),
> > + GIO_REG_WR_ADDR(rw_pb_dout),
> > + &led_dummy,
> > + GIO_REG_WR_ADDR(rw_pc_dout),
> > + &port_d_dummy,
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + &port_e_dummy,
> > + &virtual_dummy,
> > +#endif
> > +};
> > +
> > +static volatile unsigned long *data_in[NUM_PORTS] = {
> > + GIO_REG_RD_ADDR(r_pa_din),
> > + GIO_REG_RD_ADDR(r_pb_din),
> > + &led_dummy,
> > + GIO_REG_RD_ADDR(r_pc_din),
> > + GIO_REG_RD_ADDR(r_pd_din),
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + &port_e_dummy,
> > + &virtual_dummy,
> > +#endif
> > +};
> > +
> > +static unsigned long changeable_dir[NUM_PORTS] = {
> > + CONFIG_ETRAX_PA_CHANGEABLE_DIR,
> > + CONFIG_ETRAX_PB_CHANGEABLE_DIR,
> > + 0,
> > + CONFIG_ETRAX_PC_CHANGEABLE_DIR,
> > + 0,
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + 0,
> > + CONFIG_ETRAX_PV_CHANGEABLE_DIR,
> > +#endif
> > +};
> > +
> > +static unsigned long changeable_bits[NUM_PORTS] = {
> > + CONFIG_ETRAX_PA_CHANGEABLE_BITS,
> > + CONFIG_ETRAX_PB_CHANGEABLE_BITS,
> > + 0,
> > + CONFIG_ETRAX_PC_CHANGEABLE_BITS,
> > + 0,
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + 0,
> > + CONFIG_ETRAX_PV_CHANGEABLE_BITS,
> > +#endif
> > +};
> > +
> > +static volatile unsigned long *dir_oe[NUM_PORTS] = {
> > + GIO_REG_WR_ADDR(rw_pa_oe),
> > + GIO_REG_WR_ADDR(rw_pb_oe),
> > + &led_dummy,
> > + GIO_REG_WR_ADDR(rw_pc_oe),
> > + &port_d_dummy,
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + &port_e_dummy,
> > + &virtual_rw_pv_oe,
> > +#endif
> > +};
> > +
> > +static void
> > +gpio_set_alarm(struct gpio_private *priv)
> > +{
> > + int bit;
> > + int intr_cfg;
> > + int mask;
> > + int pins;
> > + unsigned long flags;
> > +
> > + local_irq_save(flags);
> > + intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
> > + pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
> > + mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
> > +
> > + for (bit = 0; bit < 32; bit++) {
> > + int intr = bit % 8;
> > + int pin = bit / 8;
> > + if (priv->minor < GPIO_MINOR_LEDS)
> > + pin += priv->minor * 4;
> > + else
> > + pin += (priv->minor - 1) * 4;
> > +
> > + if (priv->highalarm & (1<<bit)) {
> > + intr_cfg |= (regk_gio_hi << (intr * 3));
> > + mask |= 1 << intr;
> > + wanted_interrupts = mask & 0xff;
> > + pins |= pin << (intr * 4);
> > + } else if (priv->lowalarm & (1<<bit)) {
> > + intr_cfg |= (regk_gio_lo << (intr * 3));
> > + mask |= 1 << intr;
> > + wanted_interrupts = mask & 0xff;
> > + pins |= pin << (intr * 4);
> > + }
> > + }
> > +
> > + REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
> > + REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
> > + REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
> > +
> > + local_irq_restore(flags);
> > +}
> > +
> > +static unsigned int
> > +gpio_poll(struct file *file, struct poll_table_struct *wait)
> > +{
> > + unsigned int mask = 0;
> > + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> > + unsigned long data;
> > + unsigned long tmp;
> > +
> > + if (priv->minor >= GPIO_MINOR_PWM0 &&
> > + priv->minor <= GPIO_MINOR_LAST_PWM)
> > + return 0;
> > +
> > + poll_wait(file, &priv->alarm_wq, wait);
> > + if (priv->minor <= GPIO_MINOR_D) {
> > + data = *data_in[priv->minor];
> > + REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
> > + tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
> > + tmp &= I2C_INTERRUPT_BITS;
> > + tmp |= wanted_interrupts;
> > + REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
> > + } else
> > + return 0;
> > +
> > + if ((data & priv->highalarm) || (~data & priv->lowalarm))
> > + mask = POLLIN|POLLRDNORM;
> > +
> > + DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
> > + return mask;
> > +}
> > +
> > +static irqreturn_t
> > +gpio_interrupt(int irq, void *dev_id)
> > +{
> > + reg_gio_rw_intr_mask intr_mask;
> > + reg_gio_r_masked_intr masked_intr;
> > + reg_gio_rw_ack_intr ack_intr;
> > + unsigned long tmp;
> > + unsigned long tmp2;
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + unsigned char enable_gpiov_ack = 0;
> > +#endif
> > +
> > + /* Find what PA interrupts are active */
> > + masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
> > + tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
> > +
> > + /* Find those that we have enabled */
> > + spin_lock(&alarm_lock);
> > + tmp &= wanted_interrupts;
> > + spin_unlock(&alarm_lock);
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + /* Something changed on virtual GPIO. Interrupt is acked by
> > + * reading the device.
> > + */
> > + if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
> > + i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
> > + sizeof(cached_virtual_gpio_read));
> > + enable_gpiov_ack = 1;
> > + }
> > +#endif
> > +
> > + /* Ack them */
> > + ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
> > + REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
> > +
> > + /* Disable those interrupts.. */
> > + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
> > + tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
> > + tmp2 &= ~tmp;
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + /* Do not disable interrupt on virtual GPIO. Changes on virtual
> > + * pins are only noticed by an interrupt.
> > + */
> > + if (enable_gpiov_ack)
> > + tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> > +#endif
> > + intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
> > + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
> > +
> > + return IRQ_RETVAL(tmp);
> > +}
> > +
> > +
> > +static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
> > + loff_t *off)
> > +{
> > + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> > + unsigned char data, clk_mask, data_mask, write_msb;
> > + unsigned long flags;
> > + unsigned long shadow;
> > + volatile unsigned long *port;
> > + ssize_t retval = count;
> > + /* Only bits 0-7 may be used for write operations but allow all
> > + devices except leds... */
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + if (priv->minor == GPIO_MINOR_V)
> > + return -EFAULT;
> > +#endif
> > + if (priv->minor == GPIO_MINOR_LEDS)
> > + return -EFAULT;
> > +
> > + if (priv->minor >= GPIO_MINOR_PWM0 &&
> > + priv->minor <= GPIO_MINOR_LAST_PWM)
> > + return -EFAULT;
> > +
> > + if (!access_ok(VERIFY_READ, buf, count))
> > + return -EFAULT;
> > +
> > + clk_mask = priv->clk_mask;
> > + data_mask = priv->data_mask;
> > + /* It must have been configured using the IO_CFG_WRITE_MODE */
> > + /* Perhaps a better error code? */
> > + if (clk_mask == 0 || data_mask == 0)
> > + return -EPERM;
> > +
> > + write_msb = priv->write_msb;
> > + D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
> > + "msb: %i\n",
> > + count, data_mask, clk_mask, write_msb));
> > + port = data_out[priv->minor];
> > +
> > + while (count--) {
> > + int i;
> > + data = *buf++;
> > + if (priv->write_msb) {
> > + for (i = 7; i >= 0; i--) {
> > + local_irq_save(flags);
> > + shadow = *port;
> > + *port = shadow &= ~clk_mask;
> > + if (data & 1<<i)
> > + *port = shadow |= data_mask;
> > + else
> > + *port = shadow &= ~data_mask;
> > + /* For FPGA: min 5.0ns (DCC) before CCLK high */
> > + *port = shadow |= clk_mask;
> > + local_irq_restore(flags);
> > + }
> > + } else {
> > + for (i = 0; i <= 7; i++) {
> > + local_irq_save(flags);
> > + shadow = *port;
> > + *port = shadow &= ~clk_mask;
> > + if (data & 1<<i)
> > + *port = shadow |= data_mask;
> > + else
> > + *port = shadow &= ~data_mask;
> > + /* For FPGA: min 5.0ns (DCC) before CCLK high */
> > + *port = shadow |= clk_mask;
> > + local_irq_restore(flags);
> > + }
> > + }
> > + }
> > + return retval;
> > +}
> > +
> > +static int
> > +gpio_open(struct inode *inode, struct file *filp)
> > +{
> > + struct gpio_private *priv;
> > + int p = iminor(inode);
> > +
> > + if (p > GPIO_MINOR_LAST_PWM ||
> > + (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
> > + return -EINVAL;
> > +
> > + priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
> > +
> > + if (!priv)
> > + return -ENOMEM;
> > + memset(priv, 0, sizeof(*priv));
> > +
> > + priv->minor = p;
> > + filp->private_data = (void *)priv;
> > +
> > + /* initialize the io/alarm struct, not for PWM ports though */
> > + if (p <= GPIO_MINOR_LAST) {
> > +
> > + priv->clk_mask = 0;
> > + priv->data_mask = 0;
> > + priv->highalarm = 0;
> > + priv->lowalarm = 0;
> > +
> > + init_waitqueue_head(&priv->alarm_wq);
> > +
> > + /* link it into our alarmlist */
> > + spin_lock_irq(&alarm_lock);
> > + priv->next = alarmlist;
> > + alarmlist = priv;
> > + spin_unlock_irq(&alarm_lock);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +gpio_release(struct inode *inode, struct file *filp)
> > +{
> > + struct gpio_private *p;
> > + struct gpio_private *todel;
> > + /* local copies while updating them: */
> > + unsigned long a_high, a_low;
> > +
> > + /* prepare to free private structure */
> > + todel = (struct gpio_private *)filp->private_data;
> > +
> > + /* unlink from alarmlist - only for non-PWM ports though */
> > + if (todel->minor <= GPIO_MINOR_LAST) {
> > + spin_lock_irq(&alarm_lock);
> > + p = alarmlist;
> > +
> > + if (p == todel)
> > + alarmlist = todel->next;
> > + else {
> > + while (p->next != todel)
> > + p = p->next;
> > + p->next = todel->next;
> > + }
> > +
> > + /* Check if there are still any alarms set */
> > + p = alarmlist;
> > + a_high = 0;
> > + a_low = 0;
> > + while (p) {
> > + if (p->minor == GPIO_MINOR_A) {
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> > +#endif
> > + a_high |= p->highalarm;
> > + a_low |= p->lowalarm;
> > + }
> > +
> > + p = p->next;
> > + }
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + /* Variable 'a_low' needs to be set here again
> > + * to ensure that interrupt for virtual GPIO is handled.
> > + */
> > + a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
> > +#endif
> > +
> > + spin_unlock_irq(&alarm_lock);
> > + }
> > + kfree(todel);
> > +
> > + return 0;
> > +}
> > +
> > +/* Main device API. ioctl's to read/set/clear bits, as well as to
> > + * set alarms to wait for using a subsequent select().
> > + */
> > +
> > +inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
> > +{
> > + /* Set direction 0=unchanged 1=input,
> > + * return mask with 1=input
> > + */
> > + unsigned long flags;
> > + unsigned long dir_shadow;
> > +
> > + local_irq_save(flags);
> > + dir_shadow = *dir_oe[priv->minor];
> > + dir_shadow &= ~(arg & changeable_dir[priv->minor]);
> > + *dir_oe[priv->minor] = dir_shadow;
> > + local_irq_restore(flags);
> > +
> > + if (priv->minor == GPIO_MINOR_C)
> > + dir_shadow ^= 0xFFFF; /* Only 16 bits */
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + else if (priv->minor == GPIO_MINOR_V)
> > + dir_shadow ^= 0xFFFF; /* Only 16 bits */
> > +#endif
> > + else
> > + dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
> > +
> > + return dir_shadow;
> > +
> > +} /* setget_input */
> > +
> > +inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
> > +{
> > + unsigned long flags;
> > + unsigned long dir_shadow;
> > +
> > + local_irq_save(flags);
> > + dir_shadow = *dir_oe[priv->minor];
> > + dir_shadow |= (arg & changeable_dir[priv->minor]);
> > + *dir_oe[priv->minor] = dir_shadow;
> > + local_irq_restore(flags);
> > + return dir_shadow;
> > +} /* setget_output */
> > +
> > +static int
> > +gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
> > +
> > +static int
> > +gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg);
> > +
> > +static int
> > +gpio_ioctl(struct inode *inode, struct file *file,
> > + unsigned int cmd, unsigned long arg)
> > +{
> > + unsigned long flags;
> > + unsigned long val;
> > + unsigned long shadow;
> > + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> > +
> > + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
> > + return -EINVAL;
> > +
> > + /* Check for special ioctl handlers first */
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + if (priv->minor == GPIO_MINOR_V)
> > + return virtual_gpio_ioctl(file, cmd, arg);
> > +#endif
> > +
> > + if (priv->minor == GPIO_MINOR_LEDS)
> > + return gpio_leds_ioctl(cmd, arg);
> > +
> > + if (priv->minor >= GPIO_MINOR_PWM0 &&
> > + priv->minor <= GPIO_MINOR_LAST_PWM)
> > + return gpio_pwm_ioctl(priv, cmd, arg);
> > +
> > + switch (_IOC_NR(cmd)) {
> > + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
> > + /* Read the port. */
> > + return *data_in[priv->minor];
> > + break;
> > + case IO_SETBITS:
> > + local_irq_save(flags);
> > + /* Set changeable bits with a 1 in arg. */
> > + shadow = *data_out[priv->minor];
> > + shadow |= (arg & changeable_bits[priv->minor]);
> > + *data_out[priv->minor] = shadow;
> > + local_irq_restore(flags);
> > + break;
> > + case IO_CLRBITS:
> > + local_irq_save(flags);
> > + /* Clear changeable bits with a 1 in arg. */
> > + shadow = *data_out[priv->minor];
> > + shadow &= ~(arg & changeable_bits[priv->minor]);
> > + *data_out[priv->minor] = shadow;
> > + local_irq_restore(flags);
> > + break;
> > + case IO_HIGHALARM:
> > + /* Set alarm when bits with 1 in arg go high. */
> > + priv->highalarm |= arg;
> > + gpio_set_alarm(priv);
> > + break;
> > + case IO_LOWALARM:
> > + /* Set alarm when bits with 1 in arg go low. */
> > + priv->lowalarm |= arg;
> > + gpio_set_alarm(priv);
> > + break;
> > + case IO_CLRALARM:
> > + /* Clear alarm for bits with 1 in arg. */
> > + priv->highalarm &= ~arg;
> > + priv->lowalarm &= ~arg;
> > + gpio_set_alarm(priv);
> > + break;
> > + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
> > + /* Read direction 0=input 1=output */
> > + return *dir_oe[priv->minor];
> > + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
> > + /* Set direction 0=unchanged 1=input,
> > + * return mask with 1=input
> > + */
> > + return setget_input(priv, arg);
> > + break;
> > + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
> > + /* Set direction 0=unchanged 1=output,
> > + * return mask with 1=output
> > + */
> > + return setget_output(priv, arg);
> > +
> > + case IO_CFG_WRITE_MODE:
> > + {
> > + unsigned long dir_shadow;
> > + dir_shadow = *dir_oe[priv->minor];
> > +
> > + priv->clk_mask = arg & 0xFF;
> > + priv->data_mask = (arg >> 8) & 0xFF;
> > + priv->write_msb = (arg >> 16) & 0x01;
> > + /* Check if we're allowed to change the bits and
> > + * the direction is correct
> > + */
> > + if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
> > + (priv->data_mask & changeable_bits[priv->minor]) &&
> > + (priv->clk_mask & dir_shadow) &&
> > + (priv->data_mask & dir_shadow))) {
> > + priv->clk_mask = 0;
> > + priv->data_mask = 0;
> > + return -EPERM;
> > + }
> > + break;
> > + }
> > + case IO_READ_INBITS:
> > + /* *arg is result of reading the input pins */
> > + val = *data_in[priv->minor];
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + return 0;
> > + break;
> > + case IO_READ_OUTBITS:
> > + /* *arg is result of reading the output shadow */
> > + val = *data_out[priv->minor];
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + break;
> > + case IO_SETGET_INPUT:
> > + /* bits set in *arg is set to input,
> > + * *arg updated with current input pins.
> > + */
> > + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> > + return -EFAULT;
> > + val = setget_input(priv, val);
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + break;
> > + case IO_SETGET_OUTPUT:
> > + /* bits set in *arg is set to output,
> > + * *arg updated with current output pins.
> > + */
> > + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> > + return -EFAULT;
> > + val = setget_output(priv, val);
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + break;
> > + default:
> > + return -EINVAL;
> > + } /* switch */
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > +static int
> > +virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> > +{
> > + unsigned long flags;
> > + unsigned short val;
> > + unsigned short shadow;
> > + struct gpio_private *priv = (struct gpio_private *)file->private_data;
> > +
> > + switch (_IOC_NR(cmd)) {
> > + case IO_SETBITS:
> > + local_irq_save(flags);
> > + /* Set changeable bits with a 1 in arg. */
> > + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> > + shadow |= ~*dir_oe[priv->minor];
> > + shadow |= (arg & changeable_bits[priv->minor]);
> > + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> > + local_irq_restore(flags);
> > + break;
> > + case IO_CLRBITS:
> > + local_irq_save(flags);
> > + /* Clear changeable bits with a 1 in arg. */
> > + i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> > + shadow |= ~*dir_oe[priv->minor];
> > + shadow &= ~(arg & changeable_bits[priv->minor]);
> > + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> > + local_irq_restore(flags);
> > + break;
> > + case IO_HIGHALARM:
> > + /* Set alarm when bits with 1 in arg go high. */
> > + priv->highalarm |= arg;
> > + break;
> > + case IO_LOWALARM:
> > + /* Set alarm when bits with 1 in arg go low. */
> > + priv->lowalarm |= arg;
> > + break;
> > + case IO_CLRALARM:
> > + /* Clear alarm for bits with 1 in arg. */
> > + priv->highalarm &= ~arg;
> > + priv->lowalarm &= ~arg;
> > + break;
> > + case IO_CFG_WRITE_MODE:
> > + {
> > + unsigned long dir_shadow;
> > + dir_shadow = *dir_oe[priv->minor];
> > +
> > + priv->clk_mask = arg & 0xFF;
> > + priv->data_mask = (arg >> 8) & 0xFF;
> > + priv->write_msb = (arg >> 16) & 0x01;
> > + /* Check if we're allowed to change the bits and
> > + * the direction is correct
> > + */
> > + if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
> > + (priv->data_mask & changeable_bits[priv->minor]) &&
> > + (priv->clk_mask & dir_shadow) &&
> > + (priv->data_mask & dir_shadow))) {
> > + priv->clk_mask = 0;
> > + priv->data_mask = 0;
> > + return -EPERM;
> > + }
> > + break;
> > + }
> > + case IO_READ_INBITS:
> > + /* *arg is result of reading the input pins */
> > + val = cached_virtual_gpio_read;
> > + val &= ~*dir_oe[priv->minor];
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + return 0;
> > + break;
> > + case IO_READ_OUTBITS:
> > + /* *arg is result of reading the output shadow */
> > + i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
> > + val &= *dir_oe[priv->minor];
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + break;
> > + case IO_SETGET_INPUT:
> > + {
> > + /* bits set in *arg is set to input,
> > + * *arg updated with current input pins.
> > + */
> > + unsigned short input_mask = ~*dir_oe[priv->minor];
> > + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> > + return -EFAULT;
> > + val = setget_input(priv, val);
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + if ((input_mask & val) != input_mask) {
> > + /* Input pins changed. All ports desired as input
> > + * should be set to logic 1.
> > + */
> > + unsigned short change = input_mask ^ val;
> > + i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
> > + sizeof(shadow));
> > + shadow &= ~change;
> > + shadow |= val;
> > + i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
> > + sizeof(shadow));
> > + }
> > + break;
> > + }
> > + case IO_SETGET_OUTPUT:
> > + /* bits set in *arg is set to output,
> > + * *arg updated with current output pins.
> > + */
> > + if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
> > + return -EFAULT;
> > + val = setget_output(priv, val);
> > + if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
> > + return -EFAULT;
> > + break;
> > + default:
> > + return -EINVAL;
> > + } /* switch */
> > + return 0;
> > +}
> > +#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
> > +
> > +static int
> > +gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
> > +{
> > + unsigned char green;
> > + unsigned char red;
> > +
> > + switch (_IOC_NR(cmd)) {
> > + case IO_LEDACTIVE_SET:
> > + green = ((unsigned char) arg) & 1;
> > + red = (((unsigned char) arg) >> 1) & 1;
> > + LED_ACTIVE_SET_G(green);
> > + LED_ACTIVE_SET_R(red);
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + } /* switch */
> > +
> > + return 0;
> > +}
> > +
> > +static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
> > +{
> > + int pinmux_pwm = pinmux_pwm0 + pwm_port;
> > + int mode;
> > + reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
> > + .ccd_val = 0,
> > + .ccd_override = regk_gio_no,
> > + .mode = regk_gio_no
> > + };
> > + int allocstatus;
> > +
> > + if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
> > + return -EFAULT;
> > + rw_pwm_ctrl.mode = mode;
> > + if (mode != PWM_OFF)
> > + allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
> > + else
> > + allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
> > + if (allocstatus)
> > + return allocstatus;
> > + REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
> > + 12 * pwm_port, rw_pwm_ctrl);
> > + return 0;
> > +}
> > +
> > +static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
> > +{
> > + struct io_pwm_set_period periods;
> > + reg_gio_rw_pwm0_var rw_pwm_widths;
> > +
> > + if (copy_from_user(&periods, (struct io_pwm_set_period *) arg,
> > + sizeof(periods)))
> > + return -EFAULT;
> > + if (periods.lo > 8191 || periods.hi > 8191)
> > + return -EINVAL;
> > + rw_pwm_widths.lo = periods.lo;
> > + rw_pwm_widths.hi = periods.hi;
> > + REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
> > + 12 * pwm_port, rw_pwm_widths);
> > + return 0;
> > +}
> > +
> > +static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
> > +{
> > + unsigned int duty;
> > + reg_gio_rw_pwm0_data rw_pwm_duty;
> > +
> > + if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
> > + return -EFAULT;
> > + if (duty > 255)
> > + return -EINVAL;
> > + rw_pwm_duty.data = duty;
> > + REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
> > + 12 * pwm_port, rw_pwm_duty);
> > + return 0;
> > +}
> > +
> > +static int
> > +gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg)
> > +{
> > + int pwm_port = priv->minor - GPIO_MINOR_PWM0;
> > +
> > + switch (_IOC_NR(cmd)) {
> > + case IO_PWM_SET_MODE:
> > + return gpio_pwm_set_mode(arg, pwm_port);
> > + case IO_PWM_SET_PERIOD:
> > + return gpio_pwm_set_period(arg, pwm_port);
> > + case IO_PWM_SET_DUTY:
> > + return gpio_pwm_set_duty(arg, pwm_port);
> > + default:
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +struct file_operations gpio_fops = {
> > + .owner = THIS_MODULE,
> > + .poll = gpio_poll,
> > + .ioctl = gpio_ioctl,
> > + .write = gpio_write,
> > + .open = gpio_open,
> > + .release = gpio_release,
> > +};
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > +static void
> > +virtual_gpio_init(void)
> > +{
> > + reg_gio_rw_intr_cfg intr_cfg;
> > + reg_gio_rw_intr_mask intr_mask;
> > + unsigned short shadow;
> > +
> > + shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
> > + shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
> > + i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
> > +
> > + /* Set interrupt mask and on what state the interrupt shall trigger.
> > + * For virtual gpio the interrupt shall trigger on logic '0'.
> > + */
> > + intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
> > + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
> > +
> > + switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
> > + case 0:
> > + intr_cfg.pa0 = regk_gio_lo;
> > + intr_mask.pa0 = regk_gio_yes;
> > + break;
> > + case 1:
> > + intr_cfg.pa1 = regk_gio_lo;
> > + intr_mask.pa1 = regk_gio_yes;
> > + break;
> > + case 2:
> > + intr_cfg.pa2 = regk_gio_lo;
> > + intr_mask.pa2 = regk_gio_yes;
> > + break;
> > + case 3:
> > + intr_cfg.pa3 = regk_gio_lo;
> > + intr_mask.pa3 = regk_gio_yes;
> > + break;
> > + case 4:
> > + intr_cfg.pa4 = regk_gio_lo;
> > + intr_mask.pa4 = regk_gio_yes;
> > + break;
> > + case 5:
> > + intr_cfg.pa5 = regk_gio_lo;
> > + intr_mask.pa5 = regk_gio_yes;
> > + break;
> > + case 6:
> > + intr_cfg.pa6 = regk_gio_lo;
> > + intr_mask.pa6 = regk_gio_yes;
> > + break;
> > + case 7:
> > + intr_cfg.pa7 = regk_gio_lo;
> > + intr_mask.pa7 = regk_gio_yes;
> > + break;
> > + }
> > +
> > + REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
> > + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
> > +}
> > +#endif
> > +
> > +/* main driver initialization routine, called from mem.c */
> > +
> > +static __init int
> > +gpio_init(void)
> > +{
> > + int res;
> > +
> > + /* do the formalities */
> > +
> > + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
> > + if (res < 0) {
> > + printk(KERN_ERR "gpio: couldn't get a major number.\n");
> > + return res;
> > + }
> > +
> > + /* Clear all leds */
> > + LED_NETWORK_GRP0_SET(0);
> > + LED_NETWORK_GRP1_SET(0);
> > + LED_ACTIVE_SET(0);
> > + LED_DISK_READ(0);
> > + LED_DISK_WRITE(0);
> > +
> > + printk(KERN_INFO "ETRAX FS GPIO driver v2.6, (c) 2003-2007 "
> > + "Axis Communications AB\n");
> > + if (request_irq(GIO_INTR_VECT, gpio_interrupt,
> > + IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist))
> > + printk(KERN_ERR "err: irq for gpio\n");
> > +
> > + /* No IRQs by default. */
> > + REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
> > +
> > +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
> > + virtual_gpio_init();
> > +#endif
> > +
> > + return res;
> > +}
> > +
> > +/* this makes sure that gpio_init is called during kernel boot */
> > +
> > +module_init(gpio_init);
/^JN - Jesper Nilsson
--
Jesper Nilsson -- [email protected]