Hello.
I got an oops while I was running vmware-install.pl to upgrade
vmware-tools from VMware Workstation 6.0.2 to 6.0.4 on Ubuntu 7.10 on i386.
This may be a bug in vmware-tools kernel module, but I'm not sure.
Regards.
----------
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[ 0.000000] BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6cd0
[ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131072
[ 0.000000] HighMem 131072 -> 131072
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131072
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6C60 checksum 0
[ 0.000000] ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 1FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FEFFFC0, 0040
[ 0.000000] ACPI: APIC 1FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 1FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 130048
[ 0.000000] Kernel command line: root=UUID=bb7fd866-d530-4293-a666-009eca2d34ad ro clocksource=acpi_pm quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1994.982 MHz processor.
[ 6.003847] Console: colour VGA+ 80x25
[ 6.004705] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.005367] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.006224] Memory: 508684k/524288k available (2015k kernel code, 14980k reserved, 915k data, 364k init, 0k highmem)
[ 6.006261] virtual kernel memory layout:
[ 6.006264] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 6.006266] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.006269] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 6.006270] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 6.006272] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 6.006273] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 6.006274] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 6.006303] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.007161] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 6.087739] Calibrating delay using timer specific routine.. 3995.01 BogoMIPS (lpj=7990037)
[ 6.087801] Security Framework v1.0.0 initialized
[ 6.087863] SELinux: Disabled at boot.
[ 6.087926] Mount-cache hash table entries: 512
[ 6.087988] CPU: After generic identify, caps: 0febfbff 20000000 00000000 00000000 00002211 00000000 00000001
[ 6.088051] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.088080] CPU: L2 cache: 4096K
[ 6.088142] CPU: After all inits, caps: 0febfbff 20000000 00000000 00003940 00002211 00000000 00000001
[ 6.088205] Compat vDSO mapped to ffffe000.
[ 6.088267] Checking 'hlt' instruction... OK.
[ 6.103752] SMP alternatives: switching to UP code
[ 6.103814] Early unpacking initramfs... done
[ 6.423649] ACPI: Core revision 20070126
[ 6.423711] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 6.424024] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08
[ 6.424242] SMP alternatives: switching to SMP code
[ 6.427647] Booting processor 1/1 eip 3000
[ 6.438732] Initializing CPU#1
[ 6.515596] Calibrating delay using timer specific routine.. 3991.20 BogoMIPS (lpj=7982407)
[ 6.515658] CPU: After generic identify, caps: 0febfbff 20000000 00000000 00000000 00002211 00000000 00000001
[ 6.515721] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.515749] CPU: L2 cache: 4096K
[ 6.515811] CPU: After all inits, caps: 0febfbff 20000000 00000000 00003940 00002211 00000000 00000001
[ 6.516038] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08
[ 6.516101] Total of 2 processors activated (7986.22 BogoMIPS).
[ 6.516163] ENABLING IO-APIC IRQs
[ 6.516387] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 6.665001] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 6.685273] Brought up 2 CPUs
[ 6.847467] migration_cost=0
[ 6.849183] Booting paravirtualized kernel on bare hardware
[ 6.849308] Time: 12:03:20 Date: 05/16/108
[ 6.849370] NET: Registered protocol family 16
[ 6.851909] EISA bus registered
[ 6.851971] ACPI: bus type pci registered
[ 6.852034] PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2
[ 6.852071] PCI: Using configuration type 1
[ 6.852113] Setting up standard PCI resources
[ 6.859477] ACPI: EC: Look up EC in DSDT
[ 6.875464] ACPI: Interpreter enabled
[ 6.875492] ACPI: (supports S0 S1 S4 S5)
[ 6.875555] ACPI: Using IOAPIC for interrupt routing
[ 6.890281] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 6.890343] PCI: Probing PCI hardware (bus 00)
[ 6.893221] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 6.893261] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 6.895680] PCI: Transparent bridge - 0000:00:11.0
[ 6.895742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 6.899445] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 6.899507] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 6.899570] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 6.899632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 6.899801] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 6.899841] pnp: PnP ACPI init
[ 6.899903] ACPI: bus type pnp registered
[ 6.929460] pnp: PnP ACPI: found 12 devices
[ 6.929505] ACPI: ACPI bus type pnp unregistered
[ 6.929567] PnPBIOS: Disabled by ACPI PNP
[ 6.929740] PCI: Using ACPI for IRQ routing
[ 6.929802] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 6.951415] NET: Registered protocol family 8
[ 6.951429] NET: Registered protocol family 20
[ 6.955431] Time: tsc clocksource has been installed.
[ 6.983340] Time: acpi_pm clocksource has been installed.
[ 6.983740] Switched to high resolution mode on CPU 0
[ 6.983802] PCI: Bridge: 0000:00:01.0
[ 6.983818] IO window: disabled.
[ 6.983880] MEM window: disabled.
[ 6.983937] PREFETCH window: disabled.
[ 6.983999] PCI: Bridge: 0000:00:11.0
[ 6.984039] IO window: 2000-2fff
[ 6.984075] MEM window: disabled.
[ 6.984110] PREFETCH window: 30000000-300fffff
[ 6.984173] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 6.984235] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 6.984298] NET: Registered protocol family 2
[ 6.985562] Switched to high resolution mode on CPU 1
[ 7.023425] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 7.023555] TCP established hash table entries: 65536 (order: 7, 786432 bytes)
[ 7.023686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 7.023816] TCP: Hash tables configured (established 65536 bind 65536)
[ 7.023946] TCP reno registered
[ 7.035420] checking if image is initramfs... it is
[ 7.463121] Freeing initrd memory: 6568k freed
[ 7.463566] Simple Boot Flag at 0x36 set to 0x1
[ 7.467342] audit: initializing netlink socket (disabled)
[ 7.467472] audit(1213617798.856:1): initialized
[ 7.472404] VFS: Disk quotas dquot_6.5.1
[ 7.472565] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.472869] io scheduler noop registered
[ 7.472909] io scheduler anticipatory registered
[ 7.472918] io scheduler deadline registered
[ 7.472993] io scheduler cfq registered (default)
[ 7.473333] Limiting direct PCI/PCI transfers.
[ 7.473463] Boot video device is 0000:00:0f.0
[ 7.474118] isapnp: Scanning for PnP cards...
[ 7.829407] isapnp: No Plug & Play device found
[ 7.860239] Real Time Clock Driver v1.12ac
[ 7.860461] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 7.860514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.860666] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 7.861273] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.861515] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 7.862742] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 7.863043] input: Macintosh mouse button emulation as /class/input/input0
[ 7.863276] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
[ 8.364879] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.364959] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.365428] mice: PS/2 mouse device common for all mice
[ 8.365827] EISA: Probing bus 0 at eisa.0
[ 8.365880] Cannot allocate resource for EISA slot 1
[ 8.365894] Cannot allocate resource for EISA slot 2
[ 8.365946] EISA: Detected 0 cards.
[ 8.366559] TCP cubic registered
[ 8.366612] NET: Registered protocol family 1
[ 8.366664] Using IPI No-Shortcut mode
[ 8.366865] Magic number: 12:984:76
[ 8.366918] Freeing unused kernel memory: 364k freed
[ 8.370875] input: AT Translated Set 2 keyboard as /class/input/input1
[ 8.555335] fuse init (API version 7.8)
[ 8.563021] Capability LSM initialized
[ 8.571028] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 8.571088] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 8.571148] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 8.571209] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 8.907098] SCSI subsystem initialized
[ 8.910411] Fusion MPT base driver 3.04.04
[ 8.910423] Copyright (c) 1999-2007 LSI Logic Corporation
[ 8.911007] Fusion MPT SPI Host driver 3.04.04
[ 8.911113] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 8.911219] mptbase: Initiating ioc0 bringup
[ 8.912002] pcnet32.c:v1.33 27.Jun.2006 [email protected]
[ 8.926146] libata version 2.21 loaded.
[ 8.930975] Floppy drive(s): fd0 is 1.44M
[ 8.950508] FDC 0 is a post-1991 82077
[ 8.994253] ioc0: 53C1030: Capabilities={Initiator}
[ 9.122373] scsi0 : ioc0: LSI53C1030, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
[ 9.237956] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 9.238063] pcnet32: PCnet/PCI II 79C970A at 0x2000,<7>ata_piix 0000:00:07.1: version 2.11
[ 9.238169] 00 0c 29 91 8c 5a assigned IRQ 16.
[ 9.238557] eth0: registered as PCnet/PCI II 79C970A
[ 9.238663] pcnet32: 1 cards_found.
[ 9.238828] scsi1 : ata_piix
[ 9.239056] scsi 0:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
[ 9.239362] target0:0:0: Beginning Domain Validation
[ 9.239584] target0:0:0: Domain Validation skipping write tests
[ 9.239606] target0:0:0: Ending Domain Validation
[ 9.239713] target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
[ 9.241466] scsi2 : ata_piix
[ 9.241573] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14
[ 9.241592] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15
[ 9.242451] ata1: port disabled. ignoring.
[ 9.258584] sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB)
[ 9.258796] sd 0:0:0:0: [sda] Write Protect is off
[ 9.258825] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
[ 9.258931] sd 0:0:0:0: [sda] Cache data unavailable
[ 9.258959] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.259546] sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB)
[ 9.259652] sd 0:0:0:0: [sda] Write Protect is off
[ 9.259656] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
[ 9.259710] sd 0:0:0:0: [sda] Cache data unavailable
[ 9.259713] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.259819] sda: sda1
[ 9.262643] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.267326] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.482661] kjournald starting. Commit interval 5 seconds
[ 9.482752] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.554680] ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
[ 9.709962] ata2.00: configured for UDMA/33
[ 9.710609] scsi 2:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
[ 9.710700] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 12.725120] eth0: link up
[ 13.888779] input: PC Speaker as /class/input/input2
[ 13.939583] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.971787] agpgart: Detected an Intel 440BX Chipset.
[ 13.973079] agpgart: AGP aperture is 256M @ 0x0
[ 14.088237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.108527] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.127708] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 14.127796] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
[ 14.635379] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 14.639440] parport_pc 00:08: reported by Plug and Play ACPI
[ 14.639955] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.871456] sr0: scsi3-mmc drive: 1x/1x xa/form2 cdda tray
[ 14.871593] Uniform CD-ROM driver Revision: 3.20
[ 14.874518] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 15.651525] lp0: using parport0 (interrupt-driven).
[ 16.434944] NET: Registered protocol family 17
[ 17.529764] EXT3 FS on sda1, internal journal
[ 24.470010] NET: Registered protocol family 10
[ 24.474330] lo: Disabled Privacy Extensions
[ 35.442038] eth0: no IPv6 routers present
[ 171.902752] ISO 9660 Extensions: RRIP_1991A
[ 368.579546] vmmemctl: module license 'unspecified' taints kernel.
[ 368.582693] VMware memory control driver initialized
[ 368.582732] vmmemctl: started kernel thread pid=26097
[ 368.588995] VMware memory control driver unloaded
[ 375.147301] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 375.194835] VMware vmxnet virtual NIC driver
[ 375.195549] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 375.196128] Found vmxnet/PCI at 0x2024, irq 16.
[ 375.197638] features:
[ 375.255612] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 408.193680] BUG: unable to handle kernel paging request at virtual address 1b6ae7c4
[ 408.195348] printing eip:
[ 408.195578] c01c4e79
[ 408.195592] *pde = 00000000
[ 408.195954] Oops: 0000 [#1]
[ 408.196197] SMP
[ 408.196843] Modules linked in: isofs ipv6 af_packet lp sr_mod cdrom parport_pc parport ata_generic i2c_piix4 shpchp pci_hotplug psmouse intel_agp agpgart pcspkr i2c_core serio_raw evdev ext3 jbd mbcache sg sd_mod floppy ata_piix libata mii mptspi mptscsih mptbase scsi_transport_spi scsi_mod thermal processor fan commoncap fuse
[ 408.204241] CPU: 0
[ 408.204244] EIP: 0060:[<c01c4e79>] Tainted: P VLI
[ 408.204245] EFLAGS: 00010202 (2.6.22-14-generic #1)
[ 408.205210] EIP is at sysfs_follow_link+0x129/0x260
[ 408.205464] eax: 00000000 ebx: 00000016 ecx: 1b6ae7c4 edx: ffffffff
[ 408.205718] esi: 00000000 edi: d6a3d7b4 ebp: 00000001 esp: c9951ea4
[ 408.205985] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[ 408.206240] Process slabinfo (pid: 32516, ti=c9950000 task=df982a60 task.ti=c9950000)
[ 408.206504] Stack: 1b6ae7c4 c9951ed8 c98d4000 ffffffea c03b6650 dbf89950 00000001 c0301b60
[ 408.209978] d66faaa0 00001000 084447e0 c0187aa3 00000803 00000001 00000000 b7f5c000
[ 408.217499] d1724704 d78f1790 b7f5c000 d78f179c 00000000 c9951f40 ffffff9c d003b000
[ 408.217640] Call Trace:
[ 408.225802] [<c0187aa3>] generic_readlink+0x33/0x90
[ 408.226241] [<c012d211>] current_fs_time+0x41/0x50
[ 408.226289] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
[ 408.227059] [<c0196d44>] mntput_no_expire+0x24/0xa0
[ 408.227459] [<c016ef81>] remove_vma+0x41/0x50
[ 408.227857] [<c0183ac7>] sys_readlink+0x27/0x30
[ 408.229601] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 408.229729] =======================
[ 408.229841] Code: e8 8d ac f7 ff 8b 44 24 10 8b 40 24 83 c5 01 85 c0 75 f6 8b 44 24 14 bb 01 00 00 00 31 f6 ba ff ff ff ff 89 04 24 8b 0c 24 89 f0 <8b> 39 89 d1 f2 ae f7 d1 49 8d 5c 19 01 8b 0c 24 8b 49 24 85 c9
[ 408.255504] EIP: [<c01c4e79>] sysfs_follow_link+0x129/0x260 SS:ESP 0068:c9951ea4
[ 468.324478] WARNING: at /build/buildd/linux-source-2.6.22-2.6.22/lib/kref.c:33 kref_get()
[ 468.325259] [<c01fb0ed>] kref_get+0x3d/0x40
[ 468.325877] [<c01fa29f>] kobject_get+0xf/0x20
[ 468.326108] [<c01c4f82>] sysfs_follow_link+0x232/0x260
[ 468.326561] [<c0187aa3>] generic_readlink+0x33/0x90
[ 468.326978] [<c018cf30>] filldir+0x0/0xe0
[ 468.327409] [<c018d095>] vfs_readdir+0x85/0xb0
[ 468.327829] [<c012d211>] current_fs_time+0x41/0x50
[ 468.328229] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
[ 468.328641] [<c02f5ef9>] do_page_fault+0x389/0x690
[ 468.329062] [<c018cf30>] filldir+0x0/0xe0
[ 468.329453] [<c018d095>] vfs_readdir+0x85/0xb0
[ 468.329861] [<c0183ac7>] sys_readlink+0x27/0x30
[ 468.329971] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 468.330377] =======================
[ 468.330800] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 468.331312] printing eip:
[ 468.331569] c01c4e7d
[ 468.331801] *pde = 00000000
[ 468.332173] Oops: 0000 [#2]
[ 468.332736] SMP
[ 468.333411] Modules linked in: isofs ipv6 af_packet lp sr_mod cdrom parport_pc parport ata_generic i2c_piix4 shpchp pci_hotplug psmouse intel_agp agpgart pcspkr i2c_core serio_raw evdev ext3 jbd mbcache sg sd_mod floppy ata_piix libata mii mptspi mptscsih mptbase scsi_transport_spi scsi_mod thermal processor fan commoncap fuse
[ 468.338387] CPU: 1
[ 468.338834] EIP: 0060:[<c01c4e7d>] Tainted: P VLI
[ 468.339226] EFLAGS: 00010246 (2.6.22-14-generic #1)
[ 468.347090] EIP is at sysfs_follow_link+0x12d/0x260
[ 468.347338] eax: 00000000 ebx: 00000001 ecx: ffffffff edx: ffffffff
[ 468.347598] esi: 00000000 edi: 00000000 ebp: 00000001 esp: cf1f5ea4
[ 468.347853] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[ 468.348111] Process slabinfo (pid: 32571, ti=cf1f4000 task=db572f90 task.ti=cf1f4000)
[ 468.348377] Stack: d81c9110 cf1f5ed8 c70c3000 ffffffea c03b6650 d81c9110 00000001 c0301b60
[ 468.348575] c71ad550 00001000 084447e0 c0187aa3 c018cf30 c018d095 cf1f5f94 cf1f5fb8
[ 468.352395] da4a71f4 db572f90 da4a71c0 ffffffea 00000000 cf1f5f40 ffffff9c cd9ce000
[ 468.352591] Call Trace:
[ 468.352761] [<c0187aa3>] generic_readlink+0x33/0x90
[ 468.352911] [<c018cf30>] filldir+0x0/0xe0
[ 468.353041] [<c018d095>] vfs_readdir+0x85/0xb0
[ 468.353156] [<c012d211>] current_fs_time+0x41/0x50
[ 468.356249] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
[ 468.356649] [<c02f5ef9>] do_page_fault+0x389/0x690
[ 468.357052] [<c018cf30>] filldir+0x0/0xe0
[ 468.357442] [<c018d095>] vfs_readdir+0x85/0xb0
[ 468.357837] [<c0183ac7>] sys_readlink+0x27/0x30
[ 468.358242] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 468.358249] =======================
[ 468.358255] Code: ff 8b 44 24 10 8b 40 24 83 c5 01 85 c0 75 f6 8b 44 24 14 bb 01 00 00 00 31 f6 ba ff ff ff ff 89 04 24 8b 0c 24 89 f0 8b 39 89 d1 <f2> ae f7 d1 49 8d 5c 19 01 8b 0c 24 8b 49 24 85 c9 89 0c 24 75
[ 468.366769] EIP: [<c01c4e7d>] sysfs_follow_link+0x12d/0x260 SS:ESP 0068:cf1f5ea4
[ 504.433100] VMware hgfs: HGFS is disabled in the host
[ 504.458724] VMware memory control driver initialized
[ 504.459189] vmmemctl: started kernel thread pid=32680
[ 504.498577] VMware vmxnet virtual NIC driver
[ 504.499500] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 504.500310] Found vmxnet/PCI at 0x2024, irq 16.
[ 504.501193] features:
[ 504.686333] ethtool operation 31 not supported
[ 515.285335] eth0: no IPv6 routers present
On Sun, 2008-06-15 at 20:37 -0700, Tetsuo Handa wrote:
> Hello.
>
Hi Tetsuo,
Is this bug reproducible ?
Does this oops happen while the vmware-install script is still
executing ?
Or does it happen after the installation/upgrade is complete ?
If its the latter case, Can you please determine what line in the perl
script is triggering this oops ?
The only thing that is clear from the oops is that the kernel state is
corrupted. None of the vmware modules are yet loaded in the kernel.
I would like to isolate the problem to see if this corruption is being
caused by any of the VMware modules.
Thanks,
Alok
> I got an oops while I was running vmware-install.pl to upgrade
> vmware-tools from VMware Workstation 6.0.2 to 6.0.4 on Ubuntu 7.10 on i386.
> This may be a bug in vmware-tools kernel module, but I'm not sure.
>
> Regards.
> ----------
> [ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 512MB LOWMEM available.
> [ 0.000000] found SMP MP-table at 000f6cd0
> [ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 131072
> [ 0.000000] HighMem 131072 -> 131072
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 131072
> [ 0.000000] On node 0 totalpages: 131072
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 992 pages used for memmap
> [ 0.000000] Normal zone: 125984 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 0 pages used for memmap
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP signature @ 0xC00F6C60 checksum 0
> [ 0.000000] ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
> [ 0.000000] ACPI: RSDT 1FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
> [ 0.000000] ACPI: FACP 1FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240)
> [ 0.000000] ACPI: DSDT 1FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D)
> [ 0.000000] ACPI: FACS 1FEFFFC0, 0040
> [ 0.000000] ACPI: APIC 1FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0)
> [ 0.000000] ACPI: BOOT 1FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 6:15 APIC version 17
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] Processor #1 6:15 APIC version 17
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
> [ 0.000000] Built 1 zonelists. Total pages: 130048
> [ 0.000000] Kernel command line: root=UUID=bb7fd866-d530-4293-a666-009eca2d34ad ro clocksource=acpi_pm quiet splash
> [ 0.000000] mapped APIC to ffffd000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> [ 0.000000] Detected 1994.982 MHz processor.
> [ 6.003847] Console: colour VGA+ 80x25
> [ 6.004705] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 6.005367] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 6.006224] Memory: 508684k/524288k available (2015k kernel code, 14980k reserved, 915k data, 364k init, 0k highmem)
> [ 6.006261] virtual kernel memory layout:
> [ 6.006264] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
> [ 6.006266] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 6.006269] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
> [ 6.006270] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
> [ 6.006272] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
> [ 6.006273] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
> [ 6.006274] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
> [ 6.006303] Checking if this processor honours the WP bit even in supervisor mode... Ok.
> [ 6.007161] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> [ 6.087739] Calibrating delay using timer specific routine.. 3995.01 BogoMIPS (lpj=7990037)
> [ 6.087801] Security Framework v1.0.0 initialized
> [ 6.087863] SELinux: Disabled at boot.
> [ 6.087926] Mount-cache hash table entries: 512
> [ 6.087988] CPU: After generic identify, caps: 0febfbff 20000000 00000000 00000000 00002211 00000000 00000001
> [ 6.088051] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 6.088080] CPU: L2 cache: 4096K
> [ 6.088142] CPU: After all inits, caps: 0febfbff 20000000 00000000 00003940 00002211 00000000 00000001
> [ 6.088205] Compat vDSO mapped to ffffe000.
> [ 6.088267] Checking 'hlt' instruction... OK.
> [ 6.103752] SMP alternatives: switching to UP code
> [ 6.103814] Early unpacking initramfs... done
> [ 6.423649] ACPI: Core revision 20070126
> [ 6.423711] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
> [ 6.424024] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08
> [ 6.424242] SMP alternatives: switching to SMP code
> [ 6.427647] Booting processor 1/1 eip 3000
> [ 6.438732] Initializing CPU#1
> [ 6.515596] Calibrating delay using timer specific routine.. 3991.20 BogoMIPS (lpj=7982407)
> [ 6.515658] CPU: After generic identify, caps: 0febfbff 20000000 00000000 00000000 00002211 00000000 00000001
> [ 6.515721] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 6.515749] CPU: L2 cache: 4096K
> [ 6.515811] CPU: After all inits, caps: 0febfbff 20000000 00000000 00003940 00002211 00000000 00000001
> [ 6.516038] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08
> [ 6.516101] Total of 2 processors activated (7986.22 BogoMIPS).
> [ 6.516163] ENABLING IO-APIC IRQs
> [ 6.516387] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 6.665001] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 6.685273] Brought up 2 CPUs
> [ 6.847467] migration_cost=0
> [ 6.849183] Booting paravirtualized kernel on bare hardware
> [ 6.849308] Time: 12:03:20 Date: 05/16/108
> [ 6.849370] NET: Registered protocol family 16
> [ 6.851909] EISA bus registered
> [ 6.851971] ACPI: bus type pci registered
> [ 6.852034] PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2
> [ 6.852071] PCI: Using configuration type 1
> [ 6.852113] Setting up standard PCI resources
> [ 6.859477] ACPI: EC: Look up EC in DSDT
> [ 6.875464] ACPI: Interpreter enabled
> [ 6.875492] ACPI: (supports S0 S1 S4 S5)
> [ 6.875555] ACPI: Using IOAPIC for interrupt routing
> [ 6.890281] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 6.890343] PCI: Probing PCI hardware (bus 00)
> [ 6.893221] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
> [ 6.893261] PCI quirk: region 1040-104f claimed by PIIX4 SMB
> [ 6.895680] PCI: Transparent bridge - 0000:00:11.0
> [ 6.895742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 6.899445] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
> [ 6.899507] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
> [ 6.899570] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
> [ 6.899632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
> [ 6.899801] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 6.899841] pnp: PnP ACPI init
> [ 6.899903] ACPI: bus type pnp registered
> [ 6.929460] pnp: PnP ACPI: found 12 devices
> [ 6.929505] ACPI: ACPI bus type pnp unregistered
> [ 6.929567] PnPBIOS: Disabled by ACPI PNP
> [ 6.929740] PCI: Using ACPI for IRQ routing
> [ 6.929802] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> [ 6.951415] NET: Registered protocol family 8
> [ 6.951429] NET: Registered protocol family 20
> [ 6.955431] Time: tsc clocksource has been installed.
> [ 6.983340] Time: acpi_pm clocksource has been installed.
> [ 6.983740] Switched to high resolution mode on CPU 0
> [ 6.983802] PCI: Bridge: 0000:00:01.0
> [ 6.983818] IO window: disabled.
> [ 6.983880] MEM window: disabled.
> [ 6.983937] PREFETCH window: disabled.
> [ 6.983999] PCI: Bridge: 0000:00:11.0
> [ 6.984039] IO window: 2000-2fff
> [ 6.984075] MEM window: disabled.
> [ 6.984110] PREFETCH window: 30000000-300fffff
> [ 6.984173] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 6.984235] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 16
> [ 6.984298] NET: Registered protocol family 2
> [ 6.985562] Switched to high resolution mode on CPU 1
> [ 7.023425] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
> [ 7.023555] TCP established hash table entries: 65536 (order: 7, 786432 bytes)
> [ 7.023686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 7.023816] TCP: Hash tables configured (established 65536 bind 65536)
> [ 7.023946] TCP reno registered
> [ 7.035420] checking if image is initramfs... it is
> [ 7.463121] Freeing initrd memory: 6568k freed
> [ 7.463566] Simple Boot Flag at 0x36 set to 0x1
> [ 7.467342] audit: initializing netlink socket (disabled)
> [ 7.467472] audit(1213617798.856:1): initialized
> [ 7.472404] VFS: Disk quotas dquot_6.5.1
> [ 7.472565] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 7.472869] io scheduler noop registered
> [ 7.472909] io scheduler anticipatory registered
> [ 7.472918] io scheduler deadline registered
> [ 7.472993] io scheduler cfq registered (default)
> [ 7.473333] Limiting direct PCI/PCI transfers.
> [ 7.473463] Boot video device is 0000:00:0f.0
> [ 7.474118] isapnp: Scanning for PnP cards...
> [ 7.829407] isapnp: No Plug & Play device found
> [ 7.860239] Real Time Clock Driver v1.12ac
> [ 7.860461] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 7.860514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 7.860666] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 7.861273] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 7.861515] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 7.862742] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [ 7.863043] input: Macintosh mouse button emulation as /class/input/input0
> [ 7.863276] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
> [ 8.364879] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 8.364959] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 8.365428] mice: PS/2 mouse device common for all mice
> [ 8.365827] EISA: Probing bus 0 at eisa.0
> [ 8.365880] Cannot allocate resource for EISA slot 1
> [ 8.365894] Cannot allocate resource for EISA slot 2
> [ 8.365946] EISA: Detected 0 cards.
> [ 8.366559] TCP cubic registered
> [ 8.366612] NET: Registered protocol family 1
> [ 8.366664] Using IPI No-Shortcut mode
> [ 8.366865] Magic number: 12:984:76
> [ 8.366918] Freeing unused kernel memory: 364k freed
> [ 8.370875] input: AT Translated Set 2 keyboard as /class/input/input1
> [ 8.555335] fuse init (API version 7.8)
> [ 8.563021] Capability LSM initialized
> [ 8.571028] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 8.571088] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 8.571148] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> [ 8.571209] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> [ 8.907098] SCSI subsystem initialized
> [ 8.910411] Fusion MPT base driver 3.04.04
> [ 8.910423] Copyright (c) 1999-2007 LSI Logic Corporation
> [ 8.911007] Fusion MPT SPI Host driver 3.04.04
> [ 8.911113] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 8.911219] mptbase: Initiating ioc0 bringup
> [ 8.912002] pcnet32.c:v1.33 27.Jun.2006 [email protected]
> [ 8.926146] libata version 2.21 loaded.
> [ 8.930975] Floppy drive(s): fd0 is 1.44M
> [ 8.950508] FDC 0 is a post-1991 82077
> [ 8.994253] ioc0: 53C1030: Capabilities={Initiator}
> [ 9.122373] scsi0 : ioc0: LSI53C1030, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
> [ 9.237956] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
> [ 9.238063] pcnet32: PCnet/PCI II 79C970A at 0x2000,<7>ata_piix 0000:00:07.1: version 2.11
> [ 9.238169] 00 0c 29 91 8c 5a assigned IRQ 16.
> [ 9.238557] eth0: registered as PCnet/PCI II 79C970A
> [ 9.238663] pcnet32: 1 cards_found.
> [ 9.238828] scsi1 : ata_piix
> [ 9.239056] scsi 0:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
> [ 9.239362] target0:0:0: Beginning Domain Validation
> [ 9.239584] target0:0:0: Domain Validation skipping write tests
> [ 9.239606] target0:0:0: Ending Domain Validation
> [ 9.239713] target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
> [ 9.241466] scsi2 : ata_piix
> [ 9.241573] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14
> [ 9.241592] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15
> [ 9.242451] ata1: port disabled. ignoring.
> [ 9.258584] sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB)
> [ 9.258796] sd 0:0:0:0: [sda] Write Protect is off
> [ 9.258825] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
> [ 9.258931] sd 0:0:0:0: [sda] Cache data unavailable
> [ 9.258959] sd 0:0:0:0: [sda] Assuming drive cache: write through
> [ 9.259546] sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB)
> [ 9.259652] sd 0:0:0:0: [sda] Write Protect is off
> [ 9.259656] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
> [ 9.259710] sd 0:0:0:0: [sda] Cache data unavailable
> [ 9.259713] sd 0:0:0:0: [sda] Assuming drive cache: write through
> [ 9.259819] sda: sda1
> [ 9.262643] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 9.267326] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 9.482661] kjournald starting. Commit interval 5 seconds
> [ 9.482752] EXT3-fs: mounted filesystem with ordered data mode.
> [ 9.554680] ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
> [ 9.709962] ata2.00: configured for UDMA/33
> [ 9.710609] scsi 2:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
> [ 9.710700] scsi 2:0:0:0: Attached scsi generic sg1 type 5
> [ 12.725120] eth0: link up
> [ 13.888779] input: PC Speaker as /class/input/input2
> [ 13.939583] Linux agpgart interface v0.102 (c) Dave Jones
> [ 13.971787] agpgart: Detected an Intel 440BX Chipset.
> [ 13.973079] agpgart: AGP aperture is 256M @ 0x0
> [ 14.088237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 14.108527] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 14.127708] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
> [ 14.127796] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
> [ 14.635379] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
> [ 14.639440] parport_pc 00:08: reported by Plug and Play ACPI
> [ 14.639955] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 14.871456] sr0: scsi3-mmc drive: 1x/1x xa/form2 cdda tray
> [ 14.871593] Uniform CD-ROM driver Revision: 3.20
> [ 14.874518] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [ 15.651525] lp0: using parport0 (interrupt-driven).
> [ 16.434944] NET: Registered protocol family 17
> [ 17.529764] EXT3 FS on sda1, internal journal
> [ 24.470010] NET: Registered protocol family 10
> [ 24.474330] lo: Disabled Privacy Extensions
> [ 35.442038] eth0: no IPv6 routers present
> [ 171.902752] ISO 9660 Extensions: RRIP_1991A
> [ 368.579546] vmmemctl: module license 'unspecified' taints kernel.
> [ 368.582693] VMware memory control driver initialized
> [ 368.582732] vmmemctl: started kernel thread pid=26097
> [ 368.588995] VMware memory control driver unloaded
> [ 375.147301] ACPI: PCI interrupt for device 0000:02:00.0 disabled
> [ 375.194835] VMware vmxnet virtual NIC driver
> [ 375.195549] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
> [ 375.196128] Found vmxnet/PCI at 0x2024, irq 16.
> [ 375.197638] features:
> [ 375.255612] ACPI: PCI interrupt for device 0000:02:00.0 disabled
> [ 408.193680] BUG: unable to handle kernel paging request at virtual address 1b6ae7c4
> [ 408.195348] printing eip:
> [ 408.195578] c01c4e79
> [ 408.195592] *pde = 00000000
> [ 408.195954] Oops: 0000 [#1]
> [ 408.196197] SMP
> [ 408.196843] Modules linked in: isofs ipv6 af_packet lp sr_mod cdrom parport_pc parport ata_generic i2c_piix4 shpchp pci_hotplug psmouse intel_agp agpgart pcspkr i2c_core serio_raw evdev ext3 jbd mbcache sg sd_mod floppy ata_piix libata mii mptspi mptscsih mptbase scsi_transport_spi scsi_mod thermal processor fan commoncap fuse
> [ 408.204241] CPU: 0
> [ 408.204244] EIP: 0060:[<c01c4e79>] Tainted: P VLI
> [ 408.204245] EFLAGS: 00010202 (2.6.22-14-generic #1)
> [ 408.205210] EIP is at sysfs_follow_link+0x129/0x260
> [ 408.205464] eax: 00000000 ebx: 00000016 ecx: 1b6ae7c4 edx: ffffffff
> [ 408.205718] esi: 00000000 edi: d6a3d7b4 ebp: 00000001 esp: c9951ea4
> [ 408.205985] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
> [ 408.206240] Process slabinfo (pid: 32516, ti=c9950000 task=df982a60 task.ti=c9950000)
> [ 408.206504] Stack: 1b6ae7c4 c9951ed8 c98d4000 ffffffea c03b6650 dbf89950 00000001 c0301b60
> [ 408.209978] d66faaa0 00001000 084447e0 c0187aa3 00000803 00000001 00000000 b7f5c000
> [ 408.217499] d1724704 d78f1790 b7f5c000 d78f179c 00000000 c9951f40 ffffff9c d003b000
> [ 408.217640] Call Trace:
> [ 408.225802] [<c0187aa3>] generic_readlink+0x33/0x90
> [ 408.226241] [<c012d211>] current_fs_time+0x41/0x50
> [ 408.226289] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
> [ 408.227059] [<c0196d44>] mntput_no_expire+0x24/0xa0
> [ 408.227459] [<c016ef81>] remove_vma+0x41/0x50
> [ 408.227857] [<c0183ac7>] sys_readlink+0x27/0x30
> [ 408.229601] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
> [ 408.229729] =======================
> [ 408.229841] Code: e8 8d ac f7 ff 8b 44 24 10 8b 40 24 83 c5 01 85 c0 75 f6 8b 44 24 14 bb 01 00 00 00 31 f6 ba ff ff ff ff 89 04 24 8b 0c 24 89 f0 <8b> 39 89 d1 f2 ae f7 d1 49 8d 5c 19 01 8b 0c 24 8b 49 24 85 c9
> [ 408.255504] EIP: [<c01c4e79>] sysfs_follow_link+0x129/0x260 SS:ESP 0068:c9951ea4
> [ 468.324478] WARNING: at /build/buildd/linux-source-2.6.22-2.6.22/lib/kref.c:33 kref_get()
> [ 468.325259] [<c01fb0ed>] kref_get+0x3d/0x40
> [ 468.325877] [<c01fa29f>] kobject_get+0xf/0x20
> [ 468.326108] [<c01c4f82>] sysfs_follow_link+0x232/0x260
> [ 468.326561] [<c0187aa3>] generic_readlink+0x33/0x90
> [ 468.326978] [<c018cf30>] filldir+0x0/0xe0
> [ 468.327409] [<c018d095>] vfs_readdir+0x85/0xb0
> [ 468.327829] [<c012d211>] current_fs_time+0x41/0x50
> [ 468.328229] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
> [ 468.328641] [<c02f5ef9>] do_page_fault+0x389/0x690
> [ 468.329062] [<c018cf30>] filldir+0x0/0xe0
> [ 468.329453] [<c018d095>] vfs_readdir+0x85/0xb0
> [ 468.329861] [<c0183ac7>] sys_readlink+0x27/0x30
> [ 468.329971] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
> [ 468.330377] =======================
> [ 468.330800] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
> [ 468.331312] printing eip:
> [ 468.331569] c01c4e7d
> [ 468.331801] *pde = 00000000
> [ 468.332173] Oops: 0000 [#2]
> [ 468.332736] SMP
> [ 468.333411] Modules linked in: isofs ipv6 af_packet lp sr_mod cdrom parport_pc parport ata_generic i2c_piix4 shpchp pci_hotplug psmouse intel_agp agpgart pcspkr i2c_core serio_raw evdev ext3 jbd mbcache sg sd_mod floppy ata_piix libata mii mptspi mptscsih mptbase scsi_transport_spi scsi_mod thermal processor fan commoncap fuse
> [ 468.338387] CPU: 1
> [ 468.338834] EIP: 0060:[<c01c4e7d>] Tainted: P VLI
> [ 468.339226] EFLAGS: 00010246 (2.6.22-14-generic #1)
> [ 468.347090] EIP is at sysfs_follow_link+0x12d/0x260
> [ 468.347338] eax: 00000000 ebx: 00000001 ecx: ffffffff edx: ffffffff
> [ 468.347598] esi: 00000000 edi: 00000000 ebp: 00000001 esp: cf1f5ea4
> [ 468.347853] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
> [ 468.348111] Process slabinfo (pid: 32571, ti=cf1f4000 task=db572f90 task.ti=cf1f4000)
> [ 468.348377] Stack: d81c9110 cf1f5ed8 c70c3000 ffffffea c03b6650 d81c9110 00000001 c0301b60
> [ 468.348575] c71ad550 00001000 084447e0 c0187aa3 c018cf30 c018d095 cf1f5f94 cf1f5fb8
> [ 468.352395] da4a71f4 db572f90 da4a71c0 ffffffea 00000000 cf1f5f40 ffffff9c cd9ce000
> [ 468.352591] Call Trace:
> [ 468.352761] [<c0187aa3>] generic_readlink+0x33/0x90
> [ 468.352911] [<c018cf30>] filldir+0x0/0xe0
> [ 468.353041] [<c018d095>] vfs_readdir+0x85/0xb0
> [ 468.353156] [<c012d211>] current_fs_time+0x41/0x50
> [ 468.356249] [<c0183a6b>] sys_readlinkat+0x9b/0xd0
> [ 468.356649] [<c02f5ef9>] do_page_fault+0x389/0x690
> [ 468.357052] [<c018cf30>] filldir+0x0/0xe0
> [ 468.357442] [<c018d095>] vfs_readdir+0x85/0xb0
> [ 468.357837] [<c0183ac7>] sys_readlink+0x27/0x30
> [ 468.358242] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
> [ 468.358249] =======================
> [ 468.358255] Code: ff 8b 44 24 10 8b 40 24 83 c5 01 85 c0 75 f6 8b 44 24 14 bb 01 00 00 00 31 f6 ba ff ff ff ff 89 04 24 8b 0c 24 89 f0 8b 39 89 d1 <f2> ae f7 d1 49 8d 5c 19 01 8b 0c 24 8b 49 24 85 c9 89 0c 24 75
> [ 468.366769] EIP: [<c01c4e7d>] sysfs_follow_link+0x12d/0x260 SS:ESP 0068:cf1f5ea4
> [ 504.433100] VMware hgfs: HGFS is disabled in the host
> [ 504.458724] VMware memory control driver initialized
> [ 504.459189] vmmemctl: started kernel thread pid=32680
> [ 504.498577] VMware vmxnet virtual NIC driver
> [ 504.499500] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
> [ 504.500310] Found vmxnet/PCI at 0x2024, irq 16.
> [ 504.501193] features:
> [ 504.686333] ethtool operation 31 not supported
> [ 515.285335] eth0: no IPv6 routers present
Hello.
Alok Kataria wrote:
> Is this bug reproducible ?
Yes.
> Does this oops happen while the vmware-install script is still
> executing ?
It happened while /usr/bin/vmware-config-tools.pl is running.
I uploaded screenshots at the moment of oops.
http://I-love.SAKURA.ne.jp/tmp/oops-1.png
http://I-love.SAKURA.ne.jp/tmp/oops-2.png
http://I-love.SAKURA.ne.jp/tmp/oops-3.png
> Or does it happen after the installation/upgrade is complete ?
> If its the latter case, Can you please determine what line in the perl
> script is triggering this oops ?
The process who triggered this oops is "slabinfo".
So I tried "strace slabinfo" while I am running /usr/bin/vmware-config-tools.pl ,
and I found that the oops is happening while trying to read hgfsReqCache entry.
http://I-love.SAKURA.ne.jp/tmp/oops-4.png
Here is my environment:
Host OS:
CentOS 5.1 x86_64 on ThinkPad X60
VMware workstation 6.0.4
Guest OS:
Ubuntu 7.10 i386
Using NAT's DHCP for networking.
Regards.
