-stable review patch. If anyone has any objections, please let us know.
---------------------
From: Brian Haley <[email protected]>
upstream commit: 5a31bec014449dc9ca994e4c1dbf2802b7ca458a
Fix a zero address hole bug in the bonding arp_ip_target list
that was causing the bond to ignore ARP replies (bugz 13006).
Instead of just setting the array entry to zero, we now
copy any additional entries down one slot, putting the
zero entry at the end. With this change we can now have
all the loops that walk the array stop when they hit a zero
since there will be no addresses after it.
Changes are based in part on code fragment provided in kernel:
bugzilla 13006:
http://bugzilla.kernel.org/show_bug.cgi?id=13006
by Steve Howard <[email protected]>
Signed-off-by: Brian Haley <[email protected]>
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Chris Wright <[email protected]>
---
Documentation/networking/bonding.txt | 2 +-
drivers/net/bonding/bond_main.c | 5 ++---
drivers/net/bonding/bond_sysfs.c | 14 ++++++++------
3 files changed, 11 insertions(+), 10 deletions(-)
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa.
To add ARP targets:
# echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
# echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
- NOTE: up to 10 target addresses may be specified.
+ NOTE: up to 16 target addresses may be specified.
To remove an ARP target:
# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2565,7 +2565,7 @@ static void bond_arp_send_all(struct bon
for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
if (!targets[i])
- continue;
+ break;
pr_debug("basa: target %x\n", targets[i]);
if (list_empty(&bond->vlan_list)) {
pr_debug("basa: empty vlan: arp_send\n");
@@ -2672,7 +2672,6 @@ static void bond_validate_arp(struct bon
int i;
__be32 *targets = bond->params.arp_targets;
- targets = bond->params.arp_targets;
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
&sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip));
@@ -3294,7 +3293,7 @@ static void bond_info_show_master(struct
for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
if (!bond->params.arp_targets[i])
- continue;
+ break;
if (printed)
seq_printf(seq, ",");
seq_printf(seq, " %pI4", &bond->params.arp_targets[i]);
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -684,17 +684,15 @@ static ssize_t bonding_store_arp_targets
goto out;
}
/* look for an empty slot to put the target in, and check for dupes */
- for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) { /* duplicate */
printk(KERN_ERR DRV_NAME
": %s: ARP target %pI4 is already present\n",
bond->dev->name, &newtarget);
- if (done)
- targets[i] = 0;
ret = -EINVAL;
goto out;
}
- if (targets[i] == 0 && !done) {
+ if (targets[i] == 0) {
printk(KERN_INFO DRV_NAME
": %s: adding ARP target %pI4.\n",
bond->dev->name, &newtarget);
@@ -720,12 +718,16 @@ static ssize_t bonding_store_arp_targets
goto out;
}
- for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) {
+ int j;
printk(KERN_INFO DRV_NAME
": %s: removing ARP target %pI4.\n",
bond->dev->name, &newtarget);
- targets[i] = 0;
+ for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
+ targets[j] = targets[j+1];
+
+ targets[j] = 0;
done = 1;
}
}