The securebits are used by passing them to prctl with the
PR_{S,G}ET_SECUREBITS commands. But the defines must be
shifted to be used in prctl, which begs to be confused and
misused by userspace. So define some more convenient
values for userspace to specify. This way userspace does
prctl(PR_SET_SECUREBITS, SECBIT_NOROOT);
instead of
prctl(PR_SET_SECUREBITS, 1 << SECURE_NOROOT);
Note that I'm shortcutting SECBIT_NOROOT_LOCKED to set
(1 << SECURE_NOROOT | 1 << SECURE_NOROOT_LOCKED).
Thanks to Michael for the idea.
This patch also adds include/linux/securebits to the installed headers.
Then perhaps it can be included by glibc's sys/prctl.h.
Changelog:
Oct 14: As suggested by Michael Kerrisk, don't
use SB_* as that convention is already in
use. Use SECBIT_ prefix instead.
Signed-off-by: Serge E. Hallyn <[email protected]>
Acked-by: Andrew G. Morgan <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Ulrich Drepper <[email protected]>
---
include/linux/Kbuild | 1 +
include/linux/securebits.h | 23 ++++++++++++++++-------
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 3e8bd18..94fe9f7 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -328,6 +328,7 @@ unifdef-y += scc.h
unifdef-y += sched.h
unifdef-y += screen_info.h
unifdef-y += sdla.h
+unifdef-y += securebits.h
unifdef-y += selinux_netlink.h
unifdef-y += sem.h
unifdef-y += serial_core.h
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index d2c5ed8..5aae9b3 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,6 +1,13 @@
#ifndef _LINUX_SECUREBITS_H
#define _LINUX_SECUREBITS_H 1
+/* Each securesetting is implemented using two bits. One bit specifies
+ whether the setting is on or off. The other bit specify whether the
+ setting is locked or not. A setting which is locked cannot be
+ changed from user-level. */
+#define issecure_mask(X) (1 << (X))
+#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits))
+
#define SECUREBITS_DEFAULT 0x00000000
/* When set UID 0 has no special privileges. When unset, we support
@@ -12,6 +19,10 @@
#define SECURE_NOROOT 0
#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
+#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT) | \
+ issecure_mask(SECURE_NOROOT_LOCKED))
+
/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
When unset, to provide compatiblility with old programs relying on
set*uid to gain/lose privilege, transitions to/from uid 0 cause
@@ -19,6 +30,11 @@
#define SECURE_NO_SETUID_FIXUP 2
#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
+#define SECBIT_NO_SUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SUID_FIXUP_LOCKED \
+ (issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+ issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
/* When set, a process can retain its capabilities even after
transitioning to a non-root user (the set-uid fixup suppressed by
bit 2). Bit-4 is cleared when a process calls exec(); setting both
@@ -27,13 +43,6 @@
#define SECURE_KEEP_CAPS 4
#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-/* Each securesetting is implemented using two bits. One bit specifies
- whether the setting is on or off. The other bit specify whether the
- setting is locked or not. A setting which is locked cannot be
- changed from user-level. */
-#define issecure_mask(X) (1 << (X))
-#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits))
-
#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \
issecure_mask(SECURE_NO_SETUID_FIXUP) | \
issecure_mask(SECURE_KEEP_CAPS))
--
1.6.1
Hi Serge,
Comments below. (Sorry, I could have made most of these comments on
the earlier version of the patch, but was in a hurry, and missed
noticing them.)
On Wed, Oct 14, 2009 at 7:34 PM, Serge E. Hallyn <[email protected]> wrote:
> The securebits are used by passing them to prctl with the
> PR_{S,G}ET_SECUREBITS commands. ?But the defines must be
> shifted to be used in prctl, which begs to be confused and
> misused by userspace. ?So define some more convenient
> values for userspace to specify. ?This way userspace does
>
> ? ? ? ?prctl(PR_SET_SECUREBITS, SECBIT_NOROOT);
>
> instead of
>
> ? ? ? ?prctl(PR_SET_SECUREBITS, 1 << SECURE_NOROOT);
>
> Note that I'm shortcutting SECBIT_NOROOT_LOCKED to set
> (1 << SECURE_NOROOT | 1 << SECURE_NOROOT_LOCKED).
I don't think this is a good idea. Here you are defining a kind of
policy about how these bits will be used. It also invites some
confusion, since we have similarly named constants that result in
different semantics. I think it would be better to split these out,
and have SECBIT_NOROOT_LOCKED mean just SECURE_NOROOT_LOCKED, etc.
> Thanks to Michael for the idea.
>
> This patch also adds include/linux/securebits to the installed headers.
> Then perhaps it can be included by glibc's sys/prctl.h.
>
> Changelog:
> ? ? ? ?Oct 14: As suggested by Michael Kerrisk, don't
> ? ? ? ? ? ? ? ?use SB_* as that convention is already in
> ? ? ? ? ? ? ? ?use. ?Use SECBIT_ prefix instead.
>
> Signed-off-by: Serge E. Hallyn <[email protected]>
> Acked-by: Andrew G. Morgan <[email protected]>
> Cc: Michael Kerrisk <[email protected]>
> Cc: Ulrich Drepper ?<[email protected]>
> ---
> ?include/linux/Kbuild ? ? ? | ? ?1 +
> ?include/linux/securebits.h | ? 23 ++++++++++++++++-------
> ?2 files changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/Kbuild b/include/linux/Kbuild
> index 3e8bd18..94fe9f7 100644
> --- a/include/linux/Kbuild
> +++ b/include/linux/Kbuild
> @@ -328,6 +328,7 @@ unifdef-y += scc.h
> ?unifdef-y += sched.h
> ?unifdef-y += screen_info.h
> ?unifdef-y += sdla.h
> +unifdef-y += securebits.h
> ?unifdef-y += selinux_netlink.h
> ?unifdef-y += sem.h
> ?unifdef-y += serial_core.h
> diff --git a/include/linux/securebits.h b/include/linux/securebits.h
> index d2c5ed8..5aae9b3 100644
> --- a/include/linux/securebits.h
> +++ b/include/linux/securebits.h
> @@ -1,6 +1,13 @@
> ?#ifndef _LINUX_SECUREBITS_H
> ?#define _LINUX_SECUREBITS_H 1
>
> +/* Each securesetting is implemented using two bits. One bit specifies
> + ? whether the setting is on or off. The other bit specify whether the
> + ? setting is locked or not. A setting which is locked cannot be
> + ? changed from user-level. */
> +#define issecure_mask(X) ? ? ? (1 << (X))
> +#define issecure(X) ? ? ? ? ? ?(issecure_mask(X) & current_cred_xxx(securebits))
> +
> ?#define SECUREBITS_DEFAULT 0x00000000
>
> ?/* When set UID 0 has no special privileges. When unset, we support
> @@ -12,6 +19,10 @@
> ?#define SECURE_NOROOT ? ? ? ? ? ? ? ? ?0
> ?#define SECURE_NOROOT_LOCKED ? ? ? ? ? 1 ?/* make bit-0 immutable */
>
> +#define SECBIT_NOROOT ? ? ? ? ?(issecure_mask(SECURE_NOROOT))
> +#define SECBIT_NOROOT_LOCKED ? (issecure_mask(SECURE_NOROOT) | \
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?issecure_mask(SECURE_NOROOT_LOCKED))
> +
> ?/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
> ? ?When unset, to provide compatiblility with old programs relying on
> ? ?set*uid to gain/lose privilege, transitions to/from uid 0 cause
> @@ -19,6 +30,11 @@
> ?#define SECURE_NO_SETUID_FIXUP ? ? ? ? 2
> ?#define SECURE_NO_SETUID_FIXUP_LOCKED ?3 ?/* make bit-2 immutable */
>
> +#define SECBIT_NO_SUID_FIXUP ? (issecure_mask(SECURE_NO_SETUID_FIXUP))
> +#define SECBIT_NO_SUID_FIXUP_LOCKED \
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (issecure_mask(SECURE_NO_SETUID_FIXUP) | \
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
Please s/SUID/SETUID/ -- keep the names of the constants consistent.
People can afford to type the two extra letters. But they will be
puzzled by inconsistency.
> +
> ?/* When set, a process can retain its capabilities even after
> ? ?transitioning to a non-root user (the set-uid fixup suppressed by
> ? ?bit 2). Bit-4 is cleared when a process calls exec(); setting both
> @@ -27,13 +43,6 @@
> ?#define SECURE_KEEP_CAPS ? ? ? ? ? ? ? 4
> ?#define SECURE_KEEP_CAPS_LOCKED ? ? ? ? ? ? ? ?5 ?/* make bit-4 immutable */
I know they may be less often used, but for consistency, I think ther
should be SECBIT_* constants for KEEP_CAPS too. There's no good reason
*not* to do this, AFAICT.
Cheers,
Michael
> -/* Each securesetting is implemented using two bits. One bit specifies
> - ? whether the setting is on or off. The other bit specify whether the
> - ? setting is locked or not. A setting which is locked cannot be
> - ? changed from user-level. */
> -#define issecure_mask(X) ? ? ? (1 << (X))
> -#define issecure(X) ? ? ? ? ? ?(issecure_mask(X) & current_cred_xxx(securebits))
> -
> ?#define SECURE_ALL_BITS ? ? ? ? ? ? ? ?(issecure_mask(SECURE_NOROOT) | \
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? issecure_mask(SECURE_NO_SETUID_FIXUP) | \
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? issecure_mask(SECURE_KEEP_CAPS))
> --
> 1.6.1
>
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Author of "The Linux Programming Interface" http://blog.man7.org/