> As usual -- could you please separate out the drivers/staging bits, as
> they should better go through Greg (due to the moving-target-nature of the
> staging tree), and resubmit the rest?
>
> Thanks.
OK, done now. The patches are send in reply to this mail.
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/staging/vt6655/80211mgr.h | 2 +-
drivers/staging/vt6656/80211mgr.c | 2 +-
drivers/staging/vt6656/80211mgr.h | 2 +-
drivers/staging/vt6656/power.c | 2 +-
drivers/staging/vt6656/power.h | 2 +-
drivers/staging/vt6656/wmgr.h | 4 ++--
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/vt6655/80211mgr.h b/drivers/staging/vt6655/80211mgr.h
index 658fe14..1f7b863 100644
--- a/drivers/staging/vt6655/80211mgr.h
+++ b/drivers/staging/vt6655/80211mgr.h
@@ -19,7 +19,7 @@
*
* File: 80211mgr.h
*
- * Purpose: 802.11 managment frames pre-defines.
+ * Purpose: 802.11 management frames pre-defines.
*
*
* Author: Lyndon Chen
diff --git a/drivers/staging/vt6656/80211mgr.c b/drivers/staging/vt6656/80211mgr.c
index f24dc55..5fc96a1 100644
--- a/drivers/staging/vt6656/80211mgr.c
+++ b/drivers/staging/vt6656/80211mgr.c
@@ -18,7 +18,7 @@
*
* File: 80211mgr.c
*
- * Purpose: Handles the 802.11 managment support functions
+ * Purpose: Handles the 802.11 management support functions
*
* Author: Lyndon Chen
*
diff --git a/drivers/staging/vt6656/80211mgr.h b/drivers/staging/vt6656/80211mgr.h
index c140a95..2139839 100644
--- a/drivers/staging/vt6656/80211mgr.h
+++ b/drivers/staging/vt6656/80211mgr.h
@@ -19,7 +19,7 @@
*
* File: 80211mgr.h
*
- * Purpose: 802.11 managment frames pre-defines.
+ * Purpose: 802.11 management frames pre-defines.
*
*
* Author: Lyndon Chen
diff --git a/drivers/staging/vt6656/power.c b/drivers/staging/vt6656/power.c
index 766c5be..5ff15bf 100644
--- a/drivers/staging/vt6656/power.c
+++ b/drivers/staging/vt6656/power.c
@@ -19,7 +19,7 @@
*
* File: power.c
*
- * Purpose: Handles 802.11 power managment functions
+ * Purpose: Handles 802.11 power management functions
*
* Author: Lyndon Chen
*
diff --git a/drivers/staging/vt6656/power.h b/drivers/staging/vt6656/power.h
index 50792bb..41bffe5 100644
--- a/drivers/staging/vt6656/power.h
+++ b/drivers/staging/vt6656/power.h
@@ -18,7 +18,7 @@
*
* File: power.h
*
- * Purpose: Handles 802.11 power managment functions
+ * Purpose: Handles 802.11 power management functions
*
* Author: Lyndon Chen
*
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 1e5b916..5a890e8 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -343,11 +343,11 @@ typedef struct tagSMgmtObject
BOOL bRxBeaconInTBTTWake;
BYTE abyPSTxMap[MAX_NODE_NUM + 1];
- // managment command related
+ // management command related
unsigned int uCmdBusy;
unsigned int uCmdHostAPBusy;
- // managment packet pool
+ // management packet pool
PBYTE pbyMgmtPacketPool;
BYTE byMgmtPacketPool[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/powerpc/platforms/ps3/htab.c | 2 +-
drivers/rtc/rtc-fm3130.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1e8a1e3..15a2510 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -136,7 +136,7 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
* As lv1_read_htab_entries() does not give us the RPN, we can
* not synthesize the new hpte_r value here, and therefore can
* not update the hpte with lv1_insert_htab_entry(), so we
- * insted invalidate it and ask the caller to update it via
+ * instead invalidate it and ask the caller to update it via
* ps3_hpte_insert() by returning a -1 value.
*/
if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
index ff6fce6..e4de8f3 100644
--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@@ -104,7 +104,7 @@ static int fm3130_get_time(struct device *dev, struct rtc_time *t)
if (!fm3130->data_valid) {
/* We have invalid data in RTC, probably due
to battery faults or other problems. Return EIO
- for now, it will allow us to set data later insted
+ for now, it will allow us to set data later instead
of error during probing which disables device */
return -EIO;
}
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/mach-omap2/sleep34xx.S | 2 +-
include/linux/lru_cache.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d522cd7..ba53191 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -60,7 +60,7 @@
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
.text
-/* Function to aquire the semaphore in scratchpad */
+/* Function to acquire the semaphore in scratchpad */
ENTRY(lock_scratchpad_sem)
stmfd sp!, {lr} @ save registers on stack
wait_sem:
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index de48d16..78fbf24 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -262,7 +262,7 @@ extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char
* @lc: the lru cache to operate on
*
* Note that the reference counts and order on the active and lru lists may
- * still change. Returns true if we aquired the lock.
+ * still change. Returns true if we acquired the lock.
*/
static inline int lc_try_lock(struct lru_cache *lc)
{
--
1.7.1
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/staging/comedi/drivers/usbdux.c | 2 +-
drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
drivers/staging/pohmelfs/inode.c | 2 +-
drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 27b4cb2..7b8a2da 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2085,7 +2085,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
if (ret < 0)
return ret;
- /* initalise the buffer */
+ /* initialise the buffer */
for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
index 976227b..e9809d3 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.c
+++ b/drivers/staging/octeon/cvmx-cmd-queue.c
@@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
if (qstate->base_ptr_div128) {
if (max_depth != (int)qstate->max_depth) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"max_depth (%d).\n",
(int)qstate->max_depth);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if (fpa_pool != qstate->fpa_pool) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool (%u).\n",
qstate->fpa_pool);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool size (%u).\n",
(qstate->pool_size_m1 + 1) << 3);
return CVMX_CMD_QUEUE_INVALID_PARAM;
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 643b413..e3f95f7 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -847,7 +847,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
}
/*
- * ->alloc_inode() callback. Allocates inode and initilizes private data.
+ * ->alloc_inode() callback. Allocates inode and initializes private data.
*/
static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
{
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index c16f376..9414aa3 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd,
/*
==========================================================================
Description:
- This is a function to initilize 4-way handshake
+ This is a function to initialize 4-way handshake
Return:
@@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
When receiving the last packet of 4-way pairwisekey handshake.
- Initilize 2-way groupkey handshake following.
+ Initialize 2-way groupkey handshake following.
Return:
==========================================================================
*/
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 7391f5f..8bd5b17 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -501,13 +501,13 @@ SetRFPowerState8190(
if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
bool rtstatus = true;
- u32 InitilizeCount = 3;
+ u32 InitializeCount = 3;
do
{
- InitilizeCount--;
+ InitializeCount--;
priv->RegRfOff = false;
rtstatus = NicIFEnableNIC(dev);
- }while( (rtstatus != true) &&(InitilizeCount >0) );
+ }while( (rtstatus != true) &&(InitializeCount >0) );
if(rtstatus != true)
{
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/rapidio/rio.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 08fa453..74e9d22 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -808,7 +808,7 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
/**
* rio_std_route_get_entry - Read switch route table entry (port number)
- * assosiated with specified destID using standard registers defined in RIO
+ * associated with specified destID using standard registers defined in RIO
* specification rev.1.3
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/net/gianfar.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1830f31..abfdf93 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -904,7 +904,7 @@ static void gfar_init_filer_table(struct gfar_private *priv)
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
- /* cur_filer_idx indicated the fisrt non-masked rule */
+ /* cur_filer_idx indicated the first non-masked rule */
priv->cur_filer_idx = rqfar;
/* Rest are masked rules */
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/mach-msm/acpuclock-arm11.c | 4 ++--
arch/arm/mach-u300/gpio.c | 2 +-
arch/arm/plat-s3c24xx/clock.c | 2 +-
arch/arm/plat-samsung/clock.c | 2 +-
arch/h8300/kernel/timer/itu.c | 2 +-
arch/h8300/kernel/timer/timer16.c | 2 +-
arch/h8300/kernel/timer/timer8.c | 2 +-
arch/ia64/kvm/kvm-ia64.c | 6 +++---
arch/ia64/sn/kernel/setup.c | 2 +-
arch/sparc/boot/btfixupprep.c | 4 ++--
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/head32.c | 2 +-
drivers/crypto/amcc/crypto4xx_reg_def.h | 2 +-
drivers/dma/at_hdmac.c | 2 +-
drivers/gpu/drm/savage/savage_bci.c | 2 +-
drivers/ide/ide-gd.c | 2 +-
drivers/infiniband/hw/ehca/hcp_if.h | 2 +-
drivers/input/misc/ad714x.c | 2 +-
drivers/media/video/ov511.c | 2 +-
drivers/media/video/zoran/zoran.h | 2 +-
drivers/media/video/zoran/zr36050.c | 2 +-
drivers/media/video/zoran/zr36060.c | 2 +-
drivers/message/fusion/mptbase.c | 4 ++--
drivers/mtd/nand/denali.c | 2 +-
drivers/net/3c527.c | 4 ++--
drivers/net/appletalk/ipddp.c | 2 +-
drivers/net/hp100.c | 2 +-
drivers/net/ibm_newemac/core.c | 2 +-
drivers/net/ksz884x.c | 2 +-
drivers/net/ll_temac_main.c | 2 +-
drivers/net/tulip/dmfe.c | 20 ++++++++++----------
drivers/net/wimax/i2400m/control.c | 2 +-
drivers/parisc/ccio-dma.c | 4 ++--
drivers/pcmcia/sa11xx_base.c | 2 +-
drivers/scsi/advansys.c | 2 +-
drivers/scsi/aic94xx/aic94xx_seq.c | 4 ++--
drivers/scsi/bfa/vport.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/qla4xxx/ql4_init.c | 2 +-
drivers/serial/sn_console.c | 6 +++---
drivers/staging/comedi/drivers/usbdux.c | 2 +-
drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
drivers/staging/pohmelfs/inode.c | 2 +-
drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
drivers/usb/serial/kl5kusb105.c | 2 +-
drivers/usb/wusbcore/wusbhc.c | 2 +-
drivers/uwb/wlp/wss-lc.c | 2 +-
drivers/video/carminefb.c | 2 +-
drivers/video/tgafb.c | 2 +-
fs/befs/linuxvfs.c | 2 +-
fs/ecryptfs/crypto.c | 2 +-
fs/ext4/extents.c | 2 +-
fs/ext4/super.c | 2 +-
fs/freevxfs/vxfs_super.c | 2 +-
fs/ocfs2/super.c | 2 +-
fs/reiserfs/inode.c | 2 +-
lib/random32.c | 2 +-
net/netfilter/ipvs/ip_vs_lblc.c | 2 +-
net/netfilter/ipvs/ip_vs_lblcr.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/protocol.c | 2 +-
security/smack/smack_lsm.c | 2 +-
sound/pci/trident/trident_main.c | 2 +-
sound/soc/fsl/mpc8610_hpcd.c | 2 +-
sound/soc/soc-core.c | 2 +-
66 files changed, 90 insertions(+), 90 deletions(-)
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index af5e85b..f060a39 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -98,7 +98,7 @@ struct clkctl_acpu_speed {
/*
* ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ * out to optimized speed switching. Initialize loops_per_jiffy to 0.
*
* Table stepping up/down is optimized for 256mhz jumps while staying on the
* same PLL.
@@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void)
* Clock driver initialization
*---------------------------------------------------------------------------*/
-/* Initalize the lpj field in the acpu_freq_tbl. */
+/* Initialize the lpj field in the acpu_freq_tbl. */
static void __init lpj_init(void)
{
int i;
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 5f61fd4..d927901 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -523,7 +523,7 @@ static void gpio_set_initial_values(void)
/*
* Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initalize
+ * to output and 'GPIO_IN' to input for each port. And initialize
* default value on outputs.
*/
for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 8474d05..931d26d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -43,7 +43,7 @@
#include <plat/cpu.h>
#include <plat/pll.h>
-/* initalise all the clocks */
+/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3..90a2051 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
(clkp->enable)(clkp, 0);
}
-/* initalise all the clocks */
+/* initialise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
index 4883ba7..a2ae5e9 100644
--- a/arch/h8300/kernel/timer/itu.c
+++ b/arch/h8300/kernel/timer/itu.c
@@ -73,7 +73,7 @@ void __init h8300_timer_setup(void)
setup_irq(ITUIRQ, &itu_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, ITUBASE + TCR);
ctrl_outb(0x01, ITUBASE + TIER);
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
index 042dbb5..ae0d381 100644
--- a/arch/h8300/kernel/timer/timer16.c
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -68,7 +68,7 @@ void __init h8300_timer_setup(void)
setup_irq(_16IRQ, &timer16_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, _16BASE + TCR);
ctrl_outw(cnt, _16BASE + GRA);
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
index 38be0ca..3946c0f 100644
--- a/arch/h8300/kernel/timer/timer8.c
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -94,7 +94,7 @@ void __init h8300_timer_setup(void)
ctrl_bclr(0, MSTPCRL)
#endif
- /* initalize timer */
+ /* initialize timer */
ctrl_outw(cnt, _8BASE + TCORA);
ctrl_outw(0x0000, _8BASE + _8TCSR);
ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 21b7013..9b109f2 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1237,7 +1237,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt;
p_ctx->cr[8] = 0x3c;
- /*Initilize region register*/
+ /*Initialize region register*/
p_ctx->rr[0] = 0x30;
p_ctx->rr[1] = 0x30;
p_ctx->rr[2] = 0x30;
@@ -1246,7 +1246,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->rr[5] = 0x30;
p_ctx->rr[7] = 0x30;
- /*Initilize branch register 0*/
+ /*Initialize branch register 0*/
p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry;
vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr;
@@ -1707,7 +1707,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
BUG_ON(!module);
if (!kvm_vmm_base) {
- printk("kvm: kvm area hasn't been initilized yet!!\n");
+ printk("kvm: kvm area hasn't been initialized yet!!\n");
return -EFAULT;
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index d00dfc1..dbc4cbe 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -507,7 +507,7 @@ static void __init sn_init_pdas(char **cmdline_p)
cnodeid_t cnode;
/*
- * Allocate & initalize the nodepda for each node.
+ * Allocate & initialize the nodepda for each node.
*/
for_each_online_node(cnode) {
nodepdaindr[cnode] =
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index e7f2940..da03115 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -216,7 +216,7 @@ main1:
switch (buffer[nbase+3]) {
case 'f':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer);
exit(1);
}
if (!strcmp (sect, "__ksymtab")) {
@@ -273,7 +273,7 @@ main1:
break;
case 'i':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer);
exit(1);
}
if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) {
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc69..0bcc5ae 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -460,7 +460,7 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
}
/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
+ * Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
*/
static void __cpuinit setup_APIC_timer(void)
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index b2e2460..784360c 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -20,7 +20,7 @@
static void __init i386_default_early_setup(void)
{
- /* Initilize 32bit specific setup functions */
+ /* Initialize 32bit specific setup functions */
x86_init.resources.probe_roms = probe_roms;
x86_init.resources.reserve_resources = i386_reserve_resources;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
index 7d4edb0..5f5fbc0 100644
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
- * Initilize CRYPTO ENGINE registers, and memory bases.
+ * Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index bd5250e..e880760 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
}
/**
- * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 2d0c9ca..fa05cda 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset)
/*
- * Initalize mappings. On Savage4 and SavageIX the alignment
+ * Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c102d23..7939953 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev)
/*
* On HPA drives the capacity needs to be
- * reinitilized on resume otherwise the disk
+ * reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 39c1c36..a46e514 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
- * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
+ * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0fe27ba..c431d09 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
if (error)
goto err_free_mem;
- /* initilize and request sw/hw resources */
+ /* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index a109120..78a6eb6 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -4808,7 +4808,7 @@ ov7xx0_configure(struct usb_ov511 *ov)
return -1;
if (init_ov_sensor(ov) >= 0) {
- PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
+ PDEBUG(1, "OV7xx0 sensor initialized (method 1)");
} else {
/* Reset the 76xx */
if (i2c_w(ov, 0x12, 0x80) < 0)
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 8997add..307e847 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -391,7 +391,7 @@ struct zoran {
struct mutex resource_lock; /* prevent evil stuff */
- u8 initialized; /* flag if zoran has been correctly initalized */
+ u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;
diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c
index 639dd87..e198560 100644
--- a/drivers/media/video/zoran/zr36050.c
+++ b/drivers/media/video/zoran/zr36050.c
@@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {
diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c
index 008746f..5e4f57c 100644
--- a/drivers/media/video/zoran/zr36060.c
+++ b/drivers/media/video/zoran/zr36060.c
@@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index a6a5701..14d162f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->sh = NULL;
ioc->cached_fw = NULL;
- /* Initilize SCSI Config Data structure
+ /* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
- * Initalize link list for inactive raid volumes.
+ * Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428..3dfda9c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
-/* initalize driver data structures */
+/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395df..70705d1 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee..0362c8d 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8..dfc787f 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev)
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b150c10..0f1d4e9 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7805bbf..aa50ee1 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@ static int stp;
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 52dcc84..315eb4c 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63..0bc4f30 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f3..7f48e04 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f511e70..75a80e4 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = {
};
/**
- * ccio_ioc_init - Initalize the I/O Controller
+ * ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
- * Initalize the I/O Controller which includes setting up the
+ * Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index fa28d89..0c62fe3 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
sinfo->nskt = nr;
- /* Initiliaze processor specific parameters */
+ /* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 7f87979..0ec3da6 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
- /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ /* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index d01dcc6..7437461 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
- * Setup and initialize Central sequencers. Initialiaze the mode
+ * Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
- * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index 27cd619..e2720c8 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5ff8261..3b11fd8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm8001_chip_iounmap - which maped when initilized.
+ * pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5510df8..cd30432 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha)
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
- /* Initilize aen queue */
+ /* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0c..7e5e5ef 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 27b4cb2..7b8a2da 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2085,7 +2085,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
if (ret < 0)
return ret;
- /* initalise the buffer */
+ /* initialise the buffer */
for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
index 976227b..e9809d3 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.c
+++ b/drivers/staging/octeon/cvmx-cmd-queue.c
@@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
if (qstate->base_ptr_div128) {
if (max_depth != (int)qstate->max_depth) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"max_depth (%d).\n",
(int)qstate->max_depth);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if (fpa_pool != qstate->fpa_pool) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool (%u).\n",
qstate->fpa_pool);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool size (%u).\n",
(qstate->pool_size_m1 + 1) << 3);
return CVMX_CMD_QUEUE_INVALID_PARAM;
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 643b413..e3f95f7 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -847,7 +847,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
}
/*
- * ->alloc_inode() callback. Allocates inode and initilizes private data.
+ * ->alloc_inode() callback. Allocates inode and initializes private data.
*/
static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
{
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index c16f376..9414aa3 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd,
/*
==========================================================================
Description:
- This is a function to initilize 4-way handshake
+ This is a function to initialize 4-way handshake
Return:
@@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
When receiving the last packet of 4-way pairwisekey handshake.
- Initilize 2-way groupkey handshake following.
+ Initialize 2-way groupkey handshake following.
Return:
==========================================================================
*/
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 7391f5f..8bd5b17 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -501,13 +501,13 @@ SetRFPowerState8190(
if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
bool rtstatus = true;
- u32 InitilizeCount = 3;
+ u32 InitializeCount = 3;
do
{
- InitilizeCount--;
+ InitializeCount--;
priv->RegRfOff = false;
rtstatus = NicIFEnableNIC(dev);
- }while( (rtstatus != true) &&(InitilizeCount >0) );
+ }while( (rtstatus != true) &&(InitializeCount >0) );
if(rtstatus != true)
{
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index cdbe8bf..e8a65ce 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial)
spin_lock_init(&priv->lock);
- /* priv->termios is left uninitalized until port opening */
+ /* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index eab86e4..2054d4e 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialiazed (like sysfs
+ * the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
index 90accdd..a005d2a 100644
--- a/drivers/uwb/wlp/wss-lc.c
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -180,7 +180,7 @@ error_kobject_register:
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
- * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index d8345fc..6b19136 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw)
u32 loops;
u32 ret;
- /* Initalize Carmine */
+ /* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 1b3b1c7..aba7686 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info)
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
- /* Initalise RAMDAC. */
+ /* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 34ddda8..dc39d28 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -436,7 +436,7 @@ befs_init_inodecache(void)
init_once);
if (befs_inode_cachep == NULL) {
printk(KERN_ERR "befs_init_inodecache: "
- "Couldn't initalize inode slabcache\n");
+ "Couldn't initialize inode slabcache\n");
return -ENOMEM;
}
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 1cc0876..a2e3b56 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -762,7 +762,7 @@ ecryptfs_decrypt_page_offset(struct ecryptfs_crypt_stat *crypt_stat,
/**
* ecryptfs_init_crypt_ctx
- * @crypt_stat: Uninitilized crypt stats structure
+ * @crypt_stat: Uninitialized crypt stats structure
*
* Initialize the crypto context.
*
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 377309c..bf029c7 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2937,7 +2937,7 @@ fix_extent_len:
* One of more index blocks maybe needed if the extent tree grow after
* the unintialized extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the uninitialized extent before DIO submit
- * the IO. The uninitilized extent called at this time will be split
+ * the IO. The uninitialized extent called at this time will be split
* into three uninitialized extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4e8983a..e72d323 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3010,7 +3010,7 @@ no_journal:
ext4_ext_init(sb);
err = ext4_mb_init(sb, needs_recovery);
if (err) {
- ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
+ ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
goto failed_mount4;
}
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1e8af93..5132c99 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -135,7 +135,7 @@ static int vxfs_remount(struct super_block *sb, int *flags, char *data)
}
/**
- * vxfs_read_super - read superblock into memory and initalize filesystem
+ * vxfs_read_super - read superblock into memory and initialize filesystem
* @sbp: VFS superblock (to fill)
* @dp: fs private mount data
* @silent: do not complain loudly when sth is wrong
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0eaa929..03a799f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2472,7 +2472,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb)
kfree(osb->slot_recovery_generations);
/* FIXME
* This belongs in journal shutdown, but because we have to
- * allocate osb->journal at the start of ocfs2_initalize_osb(),
+ * allocate osb->journal at the start of ocfs2_initialize_osb(),
* we free it here.
*/
kfree(osb->journal);
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 0f22fda..29db722 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1221,7 +1221,7 @@ static void init_inode(struct inode *inode, struct treepath *path)
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V2_SIZE));
- /* read persistent inode attributes from sd and initalise
+ /* read persistent inode attributes from sd and initialise
generic inode flags from them */
REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd);
sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode);
diff --git a/lib/random32.c b/lib/random32.c
index 870dc3f..fc3545a 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -127,7 +127,7 @@ core_initcall(random32_init);
/*
* Generate better values after random number generator
- * is fully initalized.
+ * is fully initialized.
*/
static int __init random32_reseed(void)
{
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 94a4521..9323f89 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -11,7 +11,7 @@
* Changes:
* Martin Hamilton : fixed the terrible locking bugs
* *lock(tbl->lock) ==> *lock(&tbl->lock)
- * Wensong Zhang : fixed the uninitilized tbl->lock bug
+ * Wensong Zhang : fixed the uninitialized tbl->lock bug
* Wensong Zhang : added doing full expiration check to
* collect stale entries of 24+ hours when
* no partial expire check in a half hour
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 535dc2b..dbeed8e 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -386,7 +386,7 @@ ip_vs_lblcr_new(struct ip_vs_lblcr_table *tbl, const union nf_inet_addr *daddr,
ip_vs_addr_copy(dest->af, &en->addr, daddr);
en->lastuse = jiffies;
- /* initilize its dest set */
+ /* initialize its dest set */
atomic_set(&(en->set.size), 0);
INIT_LIST_HEAD(&en->set.list);
rwlock_init(&en->set.lock);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index e41feff..0b85e52 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -172,7 +172,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
(unsigned long)sp->autoclose * HZ;
- /* Initilizes the timers */
+ /* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
setup_timer(&asoc->timers[i], sctp_timer_events[i],
(unsigned long)asoc);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1827498..0f41b05 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1162,7 +1162,7 @@ SCTP_STATIC __init int sctp_init(void)
/* Set the pressure threshold to be a fraction of global memory that
* is up to 1/2 at 256 MB, decreasing toward zero with the amount of
* memory, with a floor of 128 pages.
- * Note this initalizes the data in sctpv6_prot too
+ * Note this initializes the data in sctpv6_prot too
* Unabashedly stolen from tcp_init
*/
nr_pages = totalram_pages - totalhigh_pages;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0f2fc48..276bdc7 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3227,7 +3227,7 @@ static __init int smack_init(void)
cred = (struct cred *) current->cred;
cred->security = &smack_known_floor.smk_known;
- /* initilize the smack_know_list */
+ /* initialize the smack_know_list */
init_smack_know_list();
/*
* Initialize locks
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 6d943f6..2870a4f 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -1055,7 +1055,7 @@ static int snd_trident_capture_prepare(struct snd_pcm_substream *substream)
spin_lock_irq(&trident->reg_lock);
- // Initilize the channel and set channel Mode
+ // Initialize the channel and set channel Mode
outb(0, TRID_REG(trident, LEGACY_DMAR15));
// Set DMA channel operation mode register
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 6a2764e..3a50106 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -46,7 +46,7 @@ struct mpc8610_hpcd_data {
};
/**
- * mpc8610_hpcd_machine_probe: initalize the board
+ * mpc8610_hpcd_machine_probe: initialize the board
*
* This function is called when platform_device_add() is called. It is used
* to initialize the board-specific hardware.
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 998569d..e048e09 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1307,7 +1307,7 @@ cpu_dai_err:
}
/*
- * Attempt to initialise any uninitalised cards. Must be called with
+ * Attempt to initialise any uninitialised cards. Must be called with
* client_mutex.
*/
static void snd_soc_instantiate_cards(void)
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 2 +-
drivers/media/dvb/siano/smscoreapi.c | 2 +-
drivers/net/benet/be_hw.h | 2 +-
drivers/scsi/fcoe/fcoe.c | 4 ++--
drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 4 ++--
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/qla2xxx/qla_iocb.c | 2 +-
drivers/scsi/qla2xxx/qla_nx.h | 2 +-
include/linux/ide.h | 2 +-
include/linux/if_link.h | 2 +-
11 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 8612378..5f2d5df 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1017,7 +1017,7 @@ int vmw_gmr_id_alloc(struct vmw_private *dev_priv, uint32_t *p_id)
}
/*
- * Stream managment
+ * Stream management
*/
static void vmw_stream_destroy(struct vmw_resource *res)
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 0c87a3c..a19f649 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1297,7 +1297,7 @@ int smsclient_sendrequest(struct smscore_client_t *client,
EXPORT_SYMBOL_GPL(smsclient_sendrequest);
-/* old GPIO managments implementation */
+/* old GPIO managements implementation */
int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
struct smscore_config_gpio *pinconfig)
{
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 063026d..3f1b7c3 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -52,7 +52,7 @@
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
-/********* Power managment (WOL) **********/
+/********* Power management (WOL) **********/
#define PCICFG_PM_CONTROL_OFFSET 0x44
#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 44a0759..fe568ef 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2452,7 +2452,7 @@ module_exit(fcoe_exit);
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
*/
static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
@@ -2484,7 +2484,7 @@ done:
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
*/
static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index b4afe43..41c29a8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -474,7 +474,7 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
* @shost_recovery: host reset in progress
* @ioc_reset_in_progress_lock:
* @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task managment
+ * @ignore_loginfos: ignore loginfos during task management
* @remove_host: flag for when driver unloads, to avoid sending dev resets
* @wait_for_port_enable_to_complete:
* @msix_enable: flag indicating msix is enabled
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index c5ff26a..06d645a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2979,7 +2979,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
/* host recovery or link resets sent via IOCTLs */
if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
- /* device busy with task managment */
+ /* device busy with task management */
else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
/* device has been deleted */
@@ -6845,7 +6845,7 @@ _scsih_init(void)
/* queuecommand callback hander */
scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
- /* task managment callback handler */
+ /* task management callback handler */
tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
/* base internal commands callback handler */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 3b11fd8..e81efac 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4152,7 +4152,7 @@ static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_chip_ssp_tm_req - built the task managment command.
+ * pm8001_chip_ssp_tm_req - built the task management command.
* @pm8001_ha: our hba card information.
* @ccb: the ccb information.
* @tmf: task management function.
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8ef9453..782b30d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1129,7 +1129,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
fcp_cmnd->task_attribute = 0;
- fcp_cmnd->task_managment = 0;
+ fcp_cmnd->task_management = 0;
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5..1b44d01 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -832,7 +832,7 @@ struct fcp_cmnd {
struct scsi_lun lun;
uint8_t crn;
uint8_t task_attribute;
- uint8_t task_managment;
+ uint8_t task_management;
uint8_t additional_cdb_len;
uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */
};
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 7b02aa5..072fe8c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -458,7 +458,7 @@ enum {
IDE_DFLAG_DOORLOCKING = (1 << 15),
/* disallow DMA */
IDE_DFLAG_NODMA = (1 << 16),
- /* powermanagment told us not to do anything, so sleep nicely */
+ /* powermanagement told us not to do anything, so sleep nicely */
IDE_DFLAG_BLOCKED = (1 << 17),
/* sleeping & sleep field valid */
IDE_DFLAG_SLEEPING = (1 << 18),
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 85c812d..9d8f080 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -233,7 +233,7 @@ enum macvlan_mode {
MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
};
-/* SR-IOV virtual function managment section */
+/* SR-IOV virtual function management section */
enum {
IFLA_VF_INFO_UNSPEC,
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/sh/kernel/clkdev.c | 2 +-
drivers/staging/comedi/drivers/usbdux.c | 2 +-
drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
drivers/staging/pohmelfs/inode.c | 2 +-
drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
6 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
index defdd6e..befc255 100644
--- a/arch/sh/kernel/clkdev.c
+++ b/arch/sh/kernel/clkdev.c
@@ -36,7 +36,7 @@ static DEFINE_MUTEX(clocks_mutex);
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id)
{
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 7b8a2da..27b4cb2 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2085,7 +2085,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
if (ret < 0)
return ret;
- /* initialise the buffer */
+ /* initalise the buffer */
for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
index e9809d3..976227b 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.c
+++ b/drivers/staging/octeon/cvmx-cmd-queue.c
@@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
if (qstate->base_ptr_div128) {
if (max_depth != (int)qstate->max_depth) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initialized with different "
+ "Queue already initalized with different "
"max_depth (%d).\n",
(int)qstate->max_depth);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if (fpa_pool != qstate->fpa_pool) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initialized with different "
+ "Queue already initalized with different "
"FPA pool (%u).\n",
qstate->fpa_pool);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initialized with different "
+ "Queue already initalized with different "
"FPA pool size (%u).\n",
(qstate->pool_size_m1 + 1) << 3);
return CVMX_CMD_QUEUE_INVALID_PARAM;
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index e3f95f7..643b413 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -847,7 +847,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
}
/*
- * ->alloc_inode() callback. Allocates inode and initializes private data.
+ * ->alloc_inode() callback. Allocates inode and initilizes private data.
*/
static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
{
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 9414aa3..c16f376 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd,
/*
==========================================================================
Description:
- This is a function to initialize 4-way handshake
+ This is a function to initilize 4-way handshake
Return:
@@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
When receiving the last packet of 4-way pairwisekey handshake.
- Initialize 2-way groupkey handshake following.
+ Initilize 2-way groupkey handshake following.
Return:
==========================================================================
*/
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 8bd5b17..7391f5f 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -501,13 +501,13 @@ SetRFPowerState8190(
if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
bool rtstatus = true;
- u32 InitializeCount = 3;
+ u32 InitilizeCount = 3;
do
{
- InitializeCount--;
+ InitilizeCount--;
priv->RegRfOff = false;
rtstatus = NicIFEnableNIC(dev);
- }while( (rtstatus != true) &&(InitializeCount >0) );
+ }while( (rtstatus != true) &&(InitilizeCount >0) );
if(rtstatus != true)
{
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/mach-omap2/dpll3xxx.c | 2 +-
arch/microblaze/Makefile | 2 +-
drivers/infiniband/hw/cxgb3/iwch_qp.c | 4 ++--
drivers/infiniband/hw/cxgb4/qp.c | 4 ++--
drivers/scsi/libfc/fc_lport.c | 6 +++---
drivers/scsi/libfc/fc_rport.c | 2 +-
drivers/scsi/scsi_transport_fc.c | 2 +-
kernel/cpuset.c | 2 +-
8 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b32ccd9..ed8d330 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
}
if (!ret) {
/*
- * Switch the parent clock in the heirarchy, and make sure
+ * Switch the parent clock in the hierarchy, and make sure
* that the new parent's usecount is correct. Note: we
* enable the new parent before disabling the old to avoid
* any unnecessary hardware disable->enable transitions.
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 72f6e85..592c707 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -25,7 +25,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
- # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+ # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index ae47bfd..9bbb65b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&rchp->cq);
@@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&schp->cq);
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 0c28ed1..646a2a5 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -905,7 +905,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&rchp->cq);
@@ -916,7 +916,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&schp->cq);
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 79c9e3c..ef32b06 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -32,11 +32,11 @@
* invalid SID. We also need to ensure that states don't change unexpectedly
* while processing another state.
*
- * HEIRARCHY
+ * HIERARCHY
*
- * The following heirarchy defines the locking rules. A greater lock
+ * The following hierarchy defines the locking rules. A greater lock
* may be held before acquiring a lesser lock, but a lesser lock should never
- * be held while attempting to acquire a greater lock. Here is the heirarchy-
+ * be held while attempting to acquire a greater lock. Here is the hierarchy-
*
* lport > disc, lport > rport, disc > rport
*
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 39e440f..2aa5993 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -34,7 +34,7 @@
* The rport should never hold the rport mutex and then attempt to acquire
* either the lport or disc mutexes. The rport's mutex is considered lesser
* than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
- * more comments on the heirarchy.
+ * more comments on the hierarchy.
*
* The locking strategy is similar to the lport's strategy. The lock protects
* the rport's states and is held and released by the entry points to the rport
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 0681378..edb6b36 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
/*
* Note: in the target show function we recognize when the remote
- * port is in the heirarchy and do not allow the driver to get
+ * port is in the hierarchy and do not allow the driver to get
* involved in sysfs functions. The driver only gets involved if
* it's the "old" style that doesn't use rports.
*/
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 02b9611..7cb37d8 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -105,7 +105,7 @@ struct cpuset {
/* for custom sched domain */
int relax_domain_level;
- /* used for walking a cpuset heirarchy */
+ /* used for walking a cpuset hierarchy */
struct list_head stack_list;
};
--
1.7.1
On Fri, 11 Jun 2010, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <[email protected]>
> ---
> arch/sh/kernel/clkdev.c | 2 +-
> drivers/staging/comedi/drivers/usbdux.c | 2 +-
> drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
> drivers/staging/pohmelfs/inode.c | 2 +-
> drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
> drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
Hi,
please send the staging parts separately to Greg (you did it for other
patches, but likely forgot for this one).
Thanks.
--
Jiri Kosina
SUSE Labs, Novell Inc.
On Fri, 11 Jun 2010, Uwe Kleine-K?nig wrote:
> > As usual -- could you please separate out the drivers/staging bits, as
> > they should better go through Greg (due to the moving-target-nature of the
> > staging tree), and resubmit the rest?
> >
> > Thanks.
> OK, done now. The patches are send in reply to this mail.
I have applied the patches with exception for 08/10, as it touches
staging.
--
Jiri Kosina
SUSE Labs, Novell Inc.
On 12:17 Fri 11 Jun , Uwe Kleine-K?nig wrote:
> diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
> index 7b8a2da..27b4cb2 100644
> --- a/drivers/staging/comedi/drivers/usbdux.c
> +++ b/drivers/staging/comedi/drivers/usbdux.c
> @@ -2085,7 +2085,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
> if (ret < 0)
> return ret;
>
> - /* initialise the buffer */
> + /* initalise the buffer */
> for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
> ((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
This hunk (and the remainder of this patch) is undoing your earlier
"initiali[zs]e" changes.
--
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
On 06/11/2010 03:17 AM, Uwe Kleine-König wrote:
> diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
> index e9809d3..976227b 100644
> --- a/drivers/staging/octeon/cvmx-cmd-queue.c
> +++ b/drivers/staging/octeon/cvmx-cmd-queue.c
> @@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
> if (qstate->base_ptr_div128) {
> if (max_depth != (int)qstate->max_depth) {
> cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
> - "Queue already initialized with different "
> + "Queue already initalized with different "
> "max_depth (%d).\n",
> (int)qstate->max_depth);
> return CVMX_CMD_QUEUE_INVALID_PARAM;
> }
> if (fpa_pool != qstate->fpa_pool) {
> cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
> - "Queue already initialized with different "
> + "Queue already initalized with different "
> "FPA pool (%u).\n",
> qstate->fpa_pool);
> return CVMX_CMD_QUEUE_INVALID_PARAM;
> }
> if ((pool_size>> 3) - 1 != qstate->pool_size_m1) {
> cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
> - "Queue already initialized with different "
> + "Queue already initalized with different "
> "FPA pool size (%u).\n",
> (qstate->pool_size_m1 + 1)<< 3);
> return CVMX_CMD_QUEUE_INVALID_PARAM;
NAK!
I am not sure which dictionary you are using, but I would like to keep
the spelling consistent with the American Heritage Dictionary of the
English Language, Fourth Edition. My reading indicates that no change
is needed.
David Daney
On Wed, Jun 16, 2010 at 06:04:42PM +0200, Jiri Kosina wrote:
> On Fri, 11 Jun 2010, Uwe Kleine-K?nig wrote:
>
> > Signed-off-by: Uwe Kleine-K?nig <[email protected]>
> > ---
> > arch/sh/kernel/clkdev.c | 2 +-
> > drivers/staging/comedi/drivers/usbdux.c | 2 +-
> > drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
> > drivers/staging/pohmelfs/inode.c | 2 +-
> > drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
> > drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
>
> Hi,
>
> please send the staging parts separately to Greg (you did it for other
> patches, but likely forgot for this one).
I didn't forget it but messed up the splitting. Note patch 6 touches
staging, too.
I will resend these two later today.
Sorry
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Signed-off-by: Uwe Kleine-König <[email protected]>
---
compared to (implicit) v1 this now really skips drivers/staging
arch/arm/mach-msm/acpuclock-arm11.c | 4 ++--
arch/arm/mach-u300/gpio.c | 2 +-
arch/arm/plat-s3c24xx/clock.c | 2 +-
arch/arm/plat-samsung/clock.c | 2 +-
arch/h8300/kernel/timer/itu.c | 2 +-
arch/h8300/kernel/timer/timer16.c | 2 +-
arch/h8300/kernel/timer/timer8.c | 2 +-
arch/ia64/kvm/kvm-ia64.c | 6 +++---
arch/ia64/sn/kernel/setup.c | 2 +-
arch/sparc/boot/btfixupprep.c | 4 ++--
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/head32.c | 2 +-
drivers/crypto/amcc/crypto4xx_reg_def.h | 2 +-
drivers/dma/at_hdmac.c | 2 +-
drivers/gpu/drm/savage/savage_bci.c | 2 +-
drivers/ide/ide-gd.c | 2 +-
drivers/infiniband/hw/ehca/hcp_if.h | 2 +-
drivers/input/misc/ad714x.c | 2 +-
drivers/media/video/ov511.c | 2 +-
drivers/media/video/zoran/zoran.h | 2 +-
drivers/media/video/zoran/zr36050.c | 2 +-
drivers/media/video/zoran/zr36060.c | 2 +-
drivers/message/fusion/mptbase.c | 4 ++--
drivers/mtd/nand/denali.c | 2 +-
drivers/net/3c527.c | 4 ++--
drivers/net/appletalk/ipddp.c | 2 +-
drivers/net/hp100.c | 2 +-
drivers/net/ibm_newemac/core.c | 2 +-
drivers/net/ksz884x.c | 2 +-
drivers/net/ll_temac_main.c | 2 +-
drivers/net/tulip/dmfe.c | 20 ++++++++++----------
drivers/net/wimax/i2400m/control.c | 2 +-
drivers/parisc/ccio-dma.c | 4 ++--
drivers/pcmcia/sa11xx_base.c | 2 +-
drivers/scsi/advansys.c | 2 +-
drivers/scsi/aic94xx/aic94xx_seq.c | 4 ++--
drivers/scsi/bfa/vport.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/qla4xxx/ql4_init.c | 2 +-
drivers/serial/sn_console.c | 6 +++---
drivers/usb/serial/kl5kusb105.c | 2 +-
drivers/usb/wusbcore/wusbhc.c | 2 +-
drivers/uwb/wlp/wss-lc.c | 2 +-
drivers/video/carminefb.c | 2 +-
drivers/video/tgafb.c | 2 +-
fs/befs/linuxvfs.c | 2 +-
fs/ecryptfs/crypto.c | 2 +-
fs/ext4/extents.c | 2 +-
fs/ext4/super.c | 2 +-
fs/freevxfs/vxfs_super.c | 2 +-
fs/ocfs2/super.c | 2 +-
fs/reiserfs/inode.c | 2 +-
lib/random32.c | 2 +-
net/netfilter/ipvs/ip_vs_lblc.c | 2 +-
net/netfilter/ipvs/ip_vs_lblcr.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/protocol.c | 2 +-
security/smack/smack_lsm.c | 2 +-
sound/pci/trident/trident_main.c | 2 +-
sound/soc/fsl/mpc8610_hpcd.c | 2 +-
sound/soc/soc-core.c | 2 +-
61 files changed, 80 insertions(+), 80 deletions(-)
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index af5e85b..f060a39 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -98,7 +98,7 @@ struct clkctl_acpu_speed {
/*
* ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ * out to optimized speed switching. Initialize loops_per_jiffy to 0.
*
* Table stepping up/down is optimized for 256mhz jumps while staying on the
* same PLL.
@@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void)
* Clock driver initialization
*---------------------------------------------------------------------------*/
-/* Initalize the lpj field in the acpu_freq_tbl. */
+/* Initialize the lpj field in the acpu_freq_tbl. */
static void __init lpj_init(void)
{
int i;
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 5f61fd4..d927901 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -523,7 +523,7 @@ static void gpio_set_initial_values(void)
/*
* Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initalize
+ * to output and 'GPIO_IN' to input for each port. And initialize
* default value on outputs.
*/
for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 8474d05..931d26d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -43,7 +43,7 @@
#include <plat/cpu.h>
#include <plat/pll.h>
-/* initalise all the clocks */
+/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3..90a2051 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
(clkp->enable)(clkp, 0);
}
-/* initalise all the clocks */
+/* initialise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
index 4883ba7..a2ae5e9 100644
--- a/arch/h8300/kernel/timer/itu.c
+++ b/arch/h8300/kernel/timer/itu.c
@@ -73,7 +73,7 @@ void __init h8300_timer_setup(void)
setup_irq(ITUIRQ, &itu_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, ITUBASE + TCR);
ctrl_outb(0x01, ITUBASE + TIER);
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
index 042dbb5..ae0d381 100644
--- a/arch/h8300/kernel/timer/timer16.c
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -68,7 +68,7 @@ void __init h8300_timer_setup(void)
setup_irq(_16IRQ, &timer16_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, _16BASE + TCR);
ctrl_outw(cnt, _16BASE + GRA);
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
index 38be0ca..3946c0f 100644
--- a/arch/h8300/kernel/timer/timer8.c
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -94,7 +94,7 @@ void __init h8300_timer_setup(void)
ctrl_bclr(0, MSTPCRL)
#endif
- /* initalize timer */
+ /* initialize timer */
ctrl_outw(cnt, _8BASE + TCORA);
ctrl_outw(0x0000, _8BASE + _8TCSR);
ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 21b7013..9b109f2 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1237,7 +1237,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt;
p_ctx->cr[8] = 0x3c;
- /*Initilize region register*/
+ /*Initialize region register*/
p_ctx->rr[0] = 0x30;
p_ctx->rr[1] = 0x30;
p_ctx->rr[2] = 0x30;
@@ -1246,7 +1246,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->rr[5] = 0x30;
p_ctx->rr[7] = 0x30;
- /*Initilize branch register 0*/
+ /*Initialize branch register 0*/
p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry;
vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr;
@@ -1707,7 +1707,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
BUG_ON(!module);
if (!kvm_vmm_base) {
- printk("kvm: kvm area hasn't been initilized yet!!\n");
+ printk("kvm: kvm area hasn't been initialized yet!!\n");
return -EFAULT;
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index d00dfc1..dbc4cbe 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -507,7 +507,7 @@ static void __init sn_init_pdas(char **cmdline_p)
cnodeid_t cnode;
/*
- * Allocate & initalize the nodepda for each node.
+ * Allocate & initialize the nodepda for each node.
*/
for_each_online_node(cnode) {
nodepdaindr[cnode] =
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index e7f2940..da03115 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -216,7 +216,7 @@ main1:
switch (buffer[nbase+3]) {
case 'f':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer);
exit(1);
}
if (!strcmp (sect, "__ksymtab")) {
@@ -273,7 +273,7 @@ main1:
break;
case 'i':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer);
exit(1);
}
if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) {
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc69..0bcc5ae 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -460,7 +460,7 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
}
/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
+ * Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
*/
static void __cpuinit setup_APIC_timer(void)
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index b2e2460..784360c 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -20,7 +20,7 @@
static void __init i386_default_early_setup(void)
{
- /* Initilize 32bit specific setup functions */
+ /* Initialize 32bit specific setup functions */
x86_init.resources.probe_roms = probe_roms;
x86_init.resources.reserve_resources = i386_reserve_resources;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
index 7d4edb0..5f5fbc0 100644
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
- * Initilize CRYPTO ENGINE registers, and memory bases.
+ * Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index bd5250e..e880760 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
}
/**
- * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 2d0c9ca..fa05cda 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset)
/*
- * Initalize mappings. On Savage4 and SavageIX the alignment
+ * Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c102d23..7939953 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev)
/*
* On HPA drives the capacity needs to be
- * reinitilized on resume otherwise the disk
+ * reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 39c1c36..a46e514 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
- * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
+ * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0fe27ba..c431d09 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
if (error)
goto err_free_mem;
- /* initilize and request sw/hw resources */
+ /* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index a109120..78a6eb6 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -4808,7 +4808,7 @@ ov7xx0_configure(struct usb_ov511 *ov)
return -1;
if (init_ov_sensor(ov) >= 0) {
- PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
+ PDEBUG(1, "OV7xx0 sensor initialized (method 1)");
} else {
/* Reset the 76xx */
if (i2c_w(ov, 0x12, 0x80) < 0)
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 8997add..307e847 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -391,7 +391,7 @@ struct zoran {
struct mutex resource_lock; /* prevent evil stuff */
- u8 initialized; /* flag if zoran has been correctly initalized */
+ u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;
diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c
index 639dd87..e198560 100644
--- a/drivers/media/video/zoran/zr36050.c
+++ b/drivers/media/video/zoran/zr36050.c
@@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {
diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c
index 008746f..5e4f57c 100644
--- a/drivers/media/video/zoran/zr36060.c
+++ b/drivers/media/video/zoran/zr36060.c
@@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index a6a5701..14d162f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->sh = NULL;
ioc->cached_fw = NULL;
- /* Initilize SCSI Config Data structure
+ /* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
- * Initalize link list for inactive raid volumes.
+ * Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428..3dfda9c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
-/* initalize driver data structures */
+/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395df..70705d1 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee..0362c8d 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8..dfc787f 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev)
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b150c10..0f1d4e9 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7805bbf..aa50ee1 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@ static int stp;
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 52dcc84..315eb4c 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63..0bc4f30 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f3..7f48e04 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f511e70..75a80e4 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = {
};
/**
- * ccio_ioc_init - Initalize the I/O Controller
+ * ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
- * Initalize the I/O Controller which includes setting up the
+ * Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index fa28d89..0c62fe3 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
sinfo->nskt = nr;
- /* Initiliaze processor specific parameters */
+ /* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 7f87979..0ec3da6 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
- /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ /* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index d01dcc6..7437461 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
- * Setup and initialize Central sequencers. Initialiaze the mode
+ * Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
- * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index 27cd619..e2720c8 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5ff8261..3b11fd8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm8001_chip_iounmap - which maped when initilized.
+ * pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5510df8..cd30432 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha)
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
- /* Initilize aen queue */
+ /* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0c..7e5e5ef 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index cdbe8bf..e8a65ce 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial)
spin_lock_init(&priv->lock);
- /* priv->termios is left uninitalized until port opening */
+ /* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index eab86e4..2054d4e 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialiazed (like sysfs
+ * the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
index 90accdd..a005d2a 100644
--- a/drivers/uwb/wlp/wss-lc.c
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -180,7 +180,7 @@ error_kobject_register:
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
- * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index d8345fc..6b19136 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw)
u32 loops;
u32 ret;
- /* Initalize Carmine */
+ /* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 1b3b1c7..aba7686 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info)
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
- /* Initalise RAMDAC. */
+ /* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 34ddda8..dc39d28 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -436,7 +436,7 @@ befs_init_inodecache(void)
init_once);
if (befs_inode_cachep == NULL) {
printk(KERN_ERR "befs_init_inodecache: "
- "Couldn't initalize inode slabcache\n");
+ "Couldn't initialize inode slabcache\n");
return -ENOMEM;
}
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 1cc0876..a2e3b56 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -762,7 +762,7 @@ ecryptfs_decrypt_page_offset(struct ecryptfs_crypt_stat *crypt_stat,
/**
* ecryptfs_init_crypt_ctx
- * @crypt_stat: Uninitilized crypt stats structure
+ * @crypt_stat: Uninitialized crypt stats structure
*
* Initialize the crypto context.
*
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 377309c..bf029c7 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2937,7 +2937,7 @@ fix_extent_len:
* One of more index blocks maybe needed if the extent tree grow after
* the unintialized extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the uninitialized extent before DIO submit
- * the IO. The uninitilized extent called at this time will be split
+ * the IO. The uninitialized extent called at this time will be split
* into three uninitialized extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4e8983a..e72d323 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3010,7 +3010,7 @@ no_journal:
ext4_ext_init(sb);
err = ext4_mb_init(sb, needs_recovery);
if (err) {
- ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
+ ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
goto failed_mount4;
}
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1e8af93..5132c99 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -135,7 +135,7 @@ static int vxfs_remount(struct super_block *sb, int *flags, char *data)
}
/**
- * vxfs_read_super - read superblock into memory and initalize filesystem
+ * vxfs_read_super - read superblock into memory and initialize filesystem
* @sbp: VFS superblock (to fill)
* @dp: fs private mount data
* @silent: do not complain loudly when sth is wrong
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0eaa929..03a799f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2472,7 +2472,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb)
kfree(osb->slot_recovery_generations);
/* FIXME
* This belongs in journal shutdown, but because we have to
- * allocate osb->journal at the start of ocfs2_initalize_osb(),
+ * allocate osb->journal at the start of ocfs2_initialize_osb(),
* we free it here.
*/
kfree(osb->journal);
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 0f22fda..29db722 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1221,7 +1221,7 @@ static void init_inode(struct inode *inode, struct treepath *path)
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V2_SIZE));
- /* read persistent inode attributes from sd and initalise
+ /* read persistent inode attributes from sd and initialise
generic inode flags from them */
REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd);
sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode);
diff --git a/lib/random32.c b/lib/random32.c
index 870dc3f..fc3545a 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -127,7 +127,7 @@ core_initcall(random32_init);
/*
* Generate better values after random number generator
- * is fully initalized.
+ * is fully initialized.
*/
static int __init random32_reseed(void)
{
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 94a4521..9323f89 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -11,7 +11,7 @@
* Changes:
* Martin Hamilton : fixed the terrible locking bugs
* *lock(tbl->lock) ==> *lock(&tbl->lock)
- * Wensong Zhang : fixed the uninitilized tbl->lock bug
+ * Wensong Zhang : fixed the uninitialized tbl->lock bug
* Wensong Zhang : added doing full expiration check to
* collect stale entries of 24+ hours when
* no partial expire check in a half hour
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 535dc2b..dbeed8e 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -386,7 +386,7 @@ ip_vs_lblcr_new(struct ip_vs_lblcr_table *tbl, const union nf_inet_addr *daddr,
ip_vs_addr_copy(dest->af, &en->addr, daddr);
en->lastuse = jiffies;
- /* initilize its dest set */
+ /* initialize its dest set */
atomic_set(&(en->set.size), 0);
INIT_LIST_HEAD(&en->set.list);
rwlock_init(&en->set.lock);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index e41feff..0b85e52 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -172,7 +172,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
(unsigned long)sp->autoclose * HZ;
- /* Initilizes the timers */
+ /* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
setup_timer(&asoc->timers[i], sctp_timer_events[i],
(unsigned long)asoc);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1827498..0f41b05 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1162,7 +1162,7 @@ SCTP_STATIC __init int sctp_init(void)
/* Set the pressure threshold to be a fraction of global memory that
* is up to 1/2 at 256 MB, decreasing toward zero with the amount of
* memory, with a floor of 128 pages.
- * Note this initalizes the data in sctpv6_prot too
+ * Note this initializes the data in sctpv6_prot too
* Unabashedly stolen from tcp_init
*/
nr_pages = totalram_pages - totalhigh_pages;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0f2fc48..276bdc7 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3227,7 +3227,7 @@ static __init int smack_init(void)
cred = (struct cred *) current->cred;
cred->security = &smack_known_floor.smk_known;
- /* initilize the smack_know_list */
+ /* initialize the smack_know_list */
init_smack_know_list();
/*
* Initialize locks
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 6d943f6..2870a4f 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -1055,7 +1055,7 @@ static int snd_trident_capture_prepare(struct snd_pcm_substream *substream)
spin_lock_irq(&trident->reg_lock);
- // Initilize the channel and set channel Mode
+ // Initialize the channel and set channel Mode
outb(0, TRID_REG(trident, LEGACY_DMAR15));
// Set DMA channel operation mode register
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 6a2764e..3a50106 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -46,7 +46,7 @@ struct mpc8610_hpcd_data {
};
/**
- * mpc8610_hpcd_machine_probe: initalize the board
+ * mpc8610_hpcd_machine_probe: initialize the board
*
* This function is called when platform_device_add() is called. It is used
* to initialize the board-specific hardware.
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 998569d..e048e09 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1307,7 +1307,7 @@ cpu_dai_err:
}
/*
- * Attempt to initialise any uninitalised cards. Must be called with
+ * Attempt to initialise any uninitialised cards. Must be called with
* client_mutex.
*/
static void snd_soc_instantiate_cards(void)
--
1.7.1
Signed-off-by: Uwe Kleine-König <[email protected]>
---
compared to (implicit) v1 this now doesn't undo the initiali[zs]e fixes to
drivers/staging.
arch/sh/kernel/clkdev.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
index defdd6e..befc255 100644
--- a/arch/sh/kernel/clkdev.c
+++ b/arch/sh/kernel/clkdev.c
@@ -36,7 +36,7 @@ static DEFINE_MUTEX(clocks_mutex);
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id)
{
--
1.7.1
On Thu, 17 Jun 2010, Uwe Kleine-K?nig wrote:
> > > Signed-off-by: Uwe Kleine-K?nig <[email protected]>
> > > ---
> > > arch/sh/kernel/clkdev.c | 2 +-
> > > drivers/staging/comedi/drivers/usbdux.c | 2 +-
> > > drivers/staging/octeon/cvmx-cmd-queue.c | 6 +++---
> > > drivers/staging/pohmelfs/inode.c | 2 +-
> > > drivers/staging/rt2860/common/cmm_wpa.c | 4 ++--
> > > drivers/staging/rtl8192e/r8190_rtl8256.c | 6 +++---
> >
> > Hi,
> >
> > please send the staging parts separately to Greg (you did it for other
> > patches, but likely forgot for this one).
> I didn't forget it but messed up the splitting. Note patch 6 touches
> staging, too.
Yeah, I have already dropped the staging part of that one.
--
Jiri Kosina
SUSE Labs, Novell Inc.