Fyi:
2.6.38-git15+ bootup hangs with IDE. Following copied from screen:
Uniform Multi-Platform E-IDE driver
piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
piix 0000:00:07.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x10a0-0x10a7
ide1: BM-DMA at 0x10a8-0x10af
hda: Maxtor 90913D4, ATA DISK drive
hdb: ST51080A, ATA DISK drive
hda: UDMA/33 mode selected
hdb: MWDMA2 mode selected
Switching to clock source tsc
hdc: CRD-8400B, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for CRD-8400B (blacklisted)
ide0 at 0x1f0-0x1f7,0x3f6 0n irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
--
Pete Clements
I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=32262
for your bug report, please add your address to the CC list in there, thanks!
On piątek, 25 marca 2011 o 16:38:01 Pete Clements wrote:
> Fyi:
> 2.6.38-git15+ bootup hangs with IDE. Following copied from screen:
>
> Uniform Multi-Platform E-IDE driver
> piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
> piix 0000:00:07.1: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x10a0-0x10a7
> ide1: BM-DMA at 0x10a8-0x10af
> hda: Maxtor 90913D4, ATA DISK drive
> hdb: ST51080A, ATA DISK drive
> hda: UDMA/33 mode selected
> hdb: MWDMA2 mode selected
> Switching to clock source tsc
> hdc: CRD-8400B, ATAPI CD/DVD-ROM drive
> hdc: Disabling (U)DMA for CRD-8400B (blacklisted)
> ide0 at 0x1f0-0x1f7,0x3f6 0n irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> legacy ISA IDE ports ide-gd driver 1.18
> hda: max request size: 128KiB
--
Maciej Rutecki
http://www.maciek.unixy.pl