Hi Rafael,
These are all the remaining patches i have for 3.10. All of them have received
Acks from their maintainers leaving powerpc ones. I have got an additional patch
for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.
Please consider them for applying to your bleeding-edge or linux-next.
-------------x--------------x-------------
This patchset targets towards moving all platform specific cpufreq drivers to
drivers/cpufreq. This will lead to better consolidation code in future too.
All ARM and powerpc patches are compile tested by me.
Changes since earlier version:
- Additional patch 18/18
Viresh Kumar (18):
cpufreq: ARM: Arrange drivers in alphabetical order
cpufreq: tegra: Move driver to drivers/cpufreq
cpufreq: davinci: move cpufreq driver to drivers/cpufreq
cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq
cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq
cpufreq: integrator: move cpufreq driver to drivers/cpufreq
cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
cpufreq: AVR32: move cpufreq driver to drivers/cpufreq
cpufreq: blackfin: move cpufreq driver to drivers/cpufreq
cpufreq: cris: move cpufreq driver to drivers/cpufreq
cpufreq: ia64: move cpufreq driver to drivers/cpufreq
cpufreq: mips: move cpufreq driver to drivers/cpufreq
cpufreq: sh: move cpufreq driver to drivers/cpufreq
cpufreq: unicore2: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc/platforms/cell: move cpufreq driver to
drivers/cpufreq
arch/arm/Kconfig | 72 --------
arch/arm/mach-davinci/Makefile | 1 -
arch/arm/mach-integrator/Makefile | 1 -
arch/arm/mach-pxa/Makefile | 6 -
arch/arm/mach-pxa/include/mach/generic.h | 1 +
arch/arm/mach-s3c24xx/Kconfig | 66 +++-----
arch/arm/mach-s3c24xx/Makefile | 6 -
arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h | 0
arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +-
arch/arm/mach-sa1100/Kconfig | 26 +--
arch/arm/mach-sa1100/Makefile | 3 -
arch/arm/mach-sa1100/include/mach/generic.h | 1 +
arch/arm/mach-tegra/Makefile | 1 -
arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 +-
arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +-
arch/avr32/Kconfig | 13 --
arch/avr32/configs/atngw100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +-
arch/avr32/configs/atngw100_mrmt_defconfig | 2 +-
arch/avr32/configs/atngw100mkii_defconfig | 2 +-
.../avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +-
.../avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +-
arch/avr32/configs/atstk1002_defconfig | 2 +-
arch/avr32/configs/atstk1003_defconfig | 2 +-
arch/avr32/configs/atstk1004_defconfig | 2 +-
arch/avr32/configs/atstk1006_defconfig | 2 +-
arch/avr32/configs/favr-32_defconfig | 2 +-
arch/avr32/configs/hammerhead_defconfig | 2 +-
arch/avr32/configs/mimc200_defconfig | 2 +-
arch/avr32/mach-at32ap/Makefile | 1 -
arch/blackfin/mach-common/Makefile | 1 -
arch/cris/arch-v32/mach-a3/Makefile | 1 -
arch/cris/arch-v32/mach-fs/Makefile | 1 -
arch/ia64/Kconfig | 6 +-
arch/ia64/kernel/Makefile | 1 -
arch/ia64/kernel/cpufreq/Kconfig | 29 ----
arch/ia64/kernel/cpufreq/Makefile | 2 -
arch/mips/Kconfig | 9 +-
arch/mips/kernel/Makefile | 2 -
arch/mips/kernel/cpufreq/Kconfig | 41 -----
arch/mips/kernel/cpufreq/Makefile | 5 -
arch/powerpc/platforms/Kconfig | 31 ----
arch/powerpc/platforms/cell/Kconfig | 26 +--
arch/powerpc/platforms/cell/Makefile | 3 -
arch/powerpc/platforms/pasemi/Makefile | 1 -
arch/powerpc/platforms/powermac/Makefile | 2 -
arch/sh/Kconfig | 18 --
arch/sh/kernel/Makefile | 1 -
arch/sparc/Kconfig | 23 ---
arch/sparc/kernel/Makefile | 3 -
arch/unicore32/kernel/Makefile | 1 -
drivers/cpufreq/Kconfig | 89 ++++++++++
drivers/cpufreq/Kconfig.arm | 184 ++++++++++++++-------
drivers/cpufreq/Kconfig.powerpc | 44 +++++
drivers/cpufreq/Makefile | 42 ++++-
.../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0
.../cpufreq/blackfin-cpufreq.c | 0
.../cpufreq/cris-artpec3-cpufreq.c | 0
.../cpufreq/cris-etraxfs-cpufreq.c | 0
.../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 -
.../cpufreq/ia64-acpi-cpufreq.c | 1 -
.../cpu.c => drivers/cpufreq/integrator-cpufreq.c | 2 -
.../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
.../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
.../cpufreq/pmac32-cpufreq.c | 0
.../cpufreq/pmac64-cpufreq.c | 0
.../cpufreq/ppc_cbe_cpufreq.c | 2 +-
.../cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 +-
.../cpufreq/ppc_cbe_cpufreq_pmi.c | 3 +-
.../cpufreq/pxa2xx-cpufreq.c | 2 -
.../cpufreq/pxa3xx-cpufreq.c | 5 +-
.../cpufreq/s3c2410-cpufreq.c | 0
.../cpufreq/s3c2412-cpufreq.c | 3 +-
.../cpufreq/s3c2440-cpufreq.c | 0
.../cpufreq/s3c24xx-cpufreq-debugfs.c | 0
.../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c | 0
.../cpufreq/sa1100-cpufreq.c | 3 +-
.../cpufreq/sa1110-cpufreq.c | 3 +-
.../cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 -
.../cpufreq/sparc-us2e-cpufreq.c | 0
.../cpufreq/sparc-us3-cpufreq.c | 0
.../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 -
.../cpufreq/unicore2-cpufreq.c | 2 +-
.../linux/ppc_cbe_cpufreq.h | 4 +-
85 files changed, 385 insertions(+), 464 deletions(-)
create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
delete mode 100644 arch/mips/kernel/cpufreq/Makefile
rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
--
1.7.12.rc2.18.g61b472e
Normally we keep drivers in alphabetical inside Kconfig and Makefile and over
time this was broken for ARM cpufreq drivers. Fix it.
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Tested-by: Stephen Warren <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
drivers/cpufreq/Kconfig.arm | 116 ++++++++++++++++++++++----------------------
drivers/cpufreq/Makefile | 10 ++--
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 87b7e48..25d866a 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -14,6 +14,64 @@ config ARM_DT_BL_CPUFREQ
This enables the Generic CPUfreq driver for ARM big.LITTLE platform.
This gets frequency tables from DT.
+config ARM_EXYNOS_CPUFREQ
+ bool "SAMSUNG EXYNOS SoCs"
+ depends on ARCH_EXYNOS
+ default y
+ help
+ This adds the CPUFreq driver common part for Samsung
+ EXYNOS SoCs.
+
+ If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+ def_bool CPU_EXYNOS4210
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4210
+ SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+ def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4X12
+ SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+ def_bool SOC_EXYNOS5250
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS5250
+ SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK
+ select CPU_FREQ_TABLE
+ select GENERIC_CPUFREQ_CPU0
+ select PM_OPP
+ select REGULATOR
+
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+ tristate "Freescale i.MX6Q cpufreq support"
+ depends on SOC_IMX6Q
+ depends on REGULATOR_ANATOP
+ help
+ This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+ If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+ def_bool ARCH_KIRKWOOD && OF
+ help
+ This adds the CPUFreq driver for Marvell Kirkwood
+ SoCs.
+
config ARM_OMAP2PLUS_CPUFREQ
bool "TI OMAP2+"
depends on ARCH_OMAP2PLUS
@@ -61,67 +119,9 @@ config ARM_S5PV210_CPUFREQ
If in doubt, say N.
-config ARM_EXYNOS_CPUFREQ
- bool "SAMSUNG EXYNOS SoCs"
- depends on ARCH_EXYNOS
- default y
- help
- This adds the CPUFreq driver common part for Samsung
- EXYNOS SoCs.
-
- If in doubt, say N.
-
-config ARM_EXYNOS4210_CPUFREQ
- def_bool CPU_EXYNOS4210
- help
- This adds the CPUFreq driver for Samsung EXYNOS4210
- SoC (S5PV310 or S5PC210).
-
-config ARM_EXYNOS4X12_CPUFREQ
- def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
- help
- This adds the CPUFreq driver for Samsung EXYNOS4X12
- SoC (EXYNOS4212 or EXYNOS4412).
-
-config ARM_EXYNOS5250_CPUFREQ
- def_bool SOC_EXYNOS5250
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
-config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD && OF
- help
- This adds the CPUFreq driver for Marvell Kirkwood
- SoCs.
-
-config ARM_IMX6Q_CPUFREQ
- tristate "Freescale i.MX6Q cpufreq support"
- depends on SOC_IMX6Q
- depends on REGULATOR_ANATOP
- help
- This adds cpufreq driver support for Freescale i.MX6Q SOC.
-
- If in doubt, say N.
-
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
-
-config ARM_HIGHBANK_CPUFREQ
- tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK
- select CPU_FREQ_TABLE
- select GENERIC_CPUFREQ_CPU0
- select PM_OPP
- select REGULATOR
-
- default m
- help
- This adds the CPUFreq driver for Calxeda Highbank SoC
- based boards.
-
- If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ba9a3e1..2c25504 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -50,18 +50,18 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
-obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
##################################################################################
# PowerPC platform drivers
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq.
Cc: Stephen Warren <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Tested-by: Stephen Warren <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/mach-tegra/Makefile | 1 -
drivers/cpufreq/Makefile | 1 +
arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 --
3 files changed, 1 insertion(+), 3 deletions(-)
rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f6b46ae..09b578f 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 2c25504..c34094b 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
+obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/drivers/cpufreq/tegra-cpufreq.c
similarity index 99%
rename from arch/arm/mach-tegra/cpu-tegra.c
rename to drivers/cpufreq/tegra-cpufreq.c
index 11ca730..c74c0e1 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -1,6 +1,4 @@
/*
- * arch/arm/mach-tegra/cpu-tegra.c
- *
* Copyright (C) 2010 Google, Inc.
*
* Author:
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based davinci platform to
drivers/cpufreq.
Cc: Sekhar Nori <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Sekhar Nori <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/mach-davinci/Makefile | 1 -
drivers/cpufreq/Makefile | 1 +
arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 --
3 files changed, 1 insertion(+), 3 deletions(-)
rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa..dd1ffcc 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o
obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o
# Power Management
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_HAVE_CLK) += pm_domain.o
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c34094b..c0e8921 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
# LITTLE drivers, so that it is probed last.
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
diff --git a/arch/arm/mach-davinci/cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
similarity index 99%
rename from arch/arm/mach-davinci/cpufreq.c
rename to drivers/cpufreq/davinci-cpufreq.c
index 7c2e943..c33c76c 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -30,8 +30,6 @@
#include <mach/cpufreq.h>
#include <mach/common.h>
-#include "clock.h"
-
struct davinci_cpufreq {
struct device *dev;
struct clk *armclk;
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
Cc: Eric Miao <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Eric Miao <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/mach-pxa/Makefile | 1 -
arch/arm/mach-pxa/include/mach/generic.h | 1 +
drivers/cpufreq/Makefile | 1 +
.../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c | 5 +----
4 files changed, 3 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 12c5005..929e700 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o sleep.o standby.o
ifeq ($(CONFIG_CPU_FREQ),y)
obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
endif
# Generic drivers that other drivers may depend upon
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
new file mode 100644
index 0000000..665542e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c0e8921..3458bf2 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/drivers/cpufreq/pxa3xx-cpufreq.c
similarity index 98%
rename from arch/arm/mach-pxa/cpufreq-pxa3xx.c
rename to drivers/cpufreq/pxa3xx-cpufreq.c
index 8c45b2b..15d60f8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
* Copyright (C) 2008 Marvell International Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -17,10 +15,9 @@
#include <linux/slab.h>
#include <linux/io.h>
+#include <mach/generic.h>
#include <mach/pxa3xx-regs.h>
-#include "generic.h"
-
#define HSS_104M (0)
#define HSS_156M (1)
#define HSS_208M (2)
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based pxa2xx platform to drivers/cpufreq.
Cc: Eric Miao <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Eric Miao <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/Kconfig | 7 -------
arch/arm/mach-pxa/Makefile | 5 -----
drivers/cpufreq/Makefile | 2 ++
.../mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c | 2 --
4 files changed, 2 insertions(+), 14 deletions(-)
rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..76eb836 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2177,13 +2177,6 @@ config CPU_FREQ_INTEGRATOR
If in doubt, say Y.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
- select CPU_FREQ_TABLE
-
config CPU_FREQ_S3C
bool
help
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 929e700..648867a 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -7,11 +7,6 @@ obj-y += clock.o devices.o generic.o irq.o \
time.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
-endif
-
# Generic drivers that other drivers may depend upon
# SoC-specific code
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 3458bf2..aa766fb 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -59,6 +59,8 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/drivers/cpufreq/pxa2xx-cpufreq.c
similarity index 99%
rename from arch/arm/mach-pxa/cpufreq-pxa2xx.c
rename to drivers/cpufreq/pxa2xx-cpufreq.c
index f1ca4da..fe4c55b 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
* Copyright (C) 2002,2003 Intrinsyc Software
*
* This program is free software; you can redistribute it and/or modify
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based integrator platform to
drivers/cpufreq.
Cc: Russell King <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Linus Walleij <[email protected]>
---
arch/arm/Kconfig | 11 -----------
arch/arm/mach-integrator/Makefile | 1 -
drivers/cpufreq/Kconfig.arm | 8 ++++++++
drivers/cpufreq/Makefile | 1 +
.../cpu.c => drivers/cpufreq/integrator-cpufreq.c | 2 --
5 files changed, 9 insertions(+), 14 deletions(-)
rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 76eb836..c3563f6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2166,17 +2166,6 @@ config CPU_FREQ_SA1100
config CPU_FREQ_SA1110
bool
-config CPU_FREQ_INTEGRATOR
- tristate "CPUfreq driver for ARM Integrator CPUs"
- depends on ARCH_INTEGRATOR && CPU_FREQ
- default y
- help
- This enables the CPUfreq driver for ARM Integrator CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say Y.
-
config CPU_FREQ_S3C
bool
help
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 5521d18..d14d6b7 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 25d866a..97f208d 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -66,6 +66,14 @@ config ARM_IMX6Q_CPUFREQ
If in doubt, say N.
+config ARM_INTEGRATOR
+ tristate "CPUfreq driver for ARM Integrator CPUs"
+ depends on ARCH_INTEGRATOR
+ default y
+ help
+ This enables the CPUfreq driver for ARM Integrator CPUs.
+ If in doubt, say Y.
+
config ARM_KIRKWOOD_CPUFREQ
def_bool ARCH_KIRKWOOD && OF
help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index aa766fb..8d58016 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
+obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
diff --git a/arch/arm/mach-integrator/cpu.c b/drivers/cpufreq/integrator-cpufreq.c
similarity index 99%
rename from arch/arm/mach-integrator/cpu.c
rename to drivers/cpufreq/integrator-cpufreq.c
index df863c3..f7c99df 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/arm/mach-integrator/cpu.c
- *
* Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to
drivers/cpufreq.
Cc: Ben Dooks <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/Kconfig | 46 ---------------
arch/arm/mach-s3c24xx/Kconfig | 66 +++++++++-------------
arch/arm/mach-s3c24xx/Makefile | 6 --
arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h | 0
arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +-
arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +-
drivers/cpufreq/Kconfig.arm | 58 +++++++++++++++++++
drivers/cpufreq/Makefile | 5 ++
.../cpufreq/s3c2410-cpufreq.c | 0
.../cpufreq/s3c2412-cpufreq.c | 3 +-
.../cpufreq/s3c2440-cpufreq.c | 0
.../cpufreq/s3c24xx-cpufreq-debugfs.c | 0
.../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c | 0
14 files changed, 100 insertions(+), 102 deletions(-)
rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3563f6..70366b7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2166,52 +2166,6 @@ config CPU_FREQ_SA1100
config CPU_FREQ_SA1110
bool
-config CPU_FREQ_S3C
- bool
- help
- Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
- bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
- depends on ARCH_S3C24XX && CPU_FREQ
- select CPU_FREQ_S3C
- help
- This enables the CPUfreq driver for the Samsung S3C24XX family
- of CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
- bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
- depends on CPU_FREQ_S3C24XX
- help
- Compile in support for changing the PLL frequency from the
- S3C24XX series CPUfreq driver. The PLL takes time to settle
- after a frequency change, so by default it is not enabled.
-
- This also means that the PLL tables for the selected CPU(s) will
- be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
- bool "Debug CPUfreq Samsung driver core"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
- bool "Debug CPUfreq Samsung driver IO timing"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
- bool "Export debugfs for CPUFreq"
- depends on CPU_FREQ_S3C24XX && DEBUG_FS
- help
- Export status information via debugfs.
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 37f513d..81d2f3c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -202,27 +202,38 @@ config S3C24XX_GPIO_EXTRA128
Add an extra 128 gpio numbers to the available GPIO pool. This is
available for boards that need extra gpios for external devices.
+config S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+ depends on ARM_S3C24XX
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX
+ depends on ARM_S3C24XX_CPUFREQ
help
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
config S3C2410_CPUFREQ_UTILS
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
help
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
@@ -231,16 +242,9 @@ config S3C2412_IOTIMING
if CPU_S3C2410
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLL
bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
default y
help
Select the PLL table for the S3C2410
@@ -276,7 +280,7 @@ config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -385,14 +389,6 @@ config CPU_S3C2412_ONLY
!CPU_S3C2443 && CPU_S3C2412
default y
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
config S3C2412_DMA
bool
help
@@ -493,14 +489,6 @@ endif # CPU_S3C2416
if CPU_S3C2440
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_DMA
bool
help
@@ -520,15 +508,15 @@ config S3C2440_XTAL_16934400
config S3C2440_PLL_12000000
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
config S3C2440_PLL_16934400
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
@@ -582,7 +570,7 @@ config MACH_NEXCODER_2440
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
@@ -655,7 +643,7 @@ config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..15ce13c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj- :=
obj-y += common.o irq.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
#
# machine support
# following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d..bd064c0 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
#include <plat/cpu-freq-core.h>
#include <plat/clock.h>
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
#define print_ns(x) ((x) / 10), ((x) % 10)
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 95509d8..d7e1715 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
#define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
#define s3c2412_iotiming_set NULL
#endif /* CONFIG_S3C2412_IOTIMING */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
int index, size_t table_size,
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
index 80c4a80..85517ab 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
};
/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
#define __init_or_cpufreq
#else
#define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
/* Board functions */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
#else
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
{
return 0;
}
-#endif /* CONFIG_CPU_FREQ_S3C */
+#endif /* CONFIG_ARM_S3C_CPUFREQ */
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 97f208d..1ce61ba 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -86,6 +86,56 @@ config ARM_OMAP2PLUS_CPUFREQ
default ARCH_OMAP2PLUS
select CPU_FREQ_TABLE
+config ARM_S3C_CPUFREQ
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+ depends on ARCH_S3C24XX
+ select ARM_S3C_CPUFREQ
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+ help
+ Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
config ARM_S3C2416_CPUFREQ
bool "S3C2416 CPU Frequency scaling support"
depends on CPU_S3C2416
@@ -108,6 +158,14 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
If in doubt, say N.
+config ARM_S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 8d58016..a55e3e8 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -63,7 +63,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/drivers/cpufreq/s3c2410-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
rename to drivers/cpufreq/s3c2410-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/drivers/cpufreq/s3c2412-cpufreq.c
similarity index 99%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
rename to drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a..4645b48 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -25,13 +25,12 @@
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/cpu-freq-core.h>
-#include "s3c2412.h"
-
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/drivers/cpufreq/s3c2440-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
rename to drivers/cpufreq/s3c2440-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-debugfs.c
rename to drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq.c
rename to drivers/cpufreq/s3c24xx-cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.
Cc: Russell King <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
---
arch/arm/Kconfig | 8 -------
arch/arm/mach-sa1100/Kconfig | 26 +++++++++++-----------
arch/arm/mach-sa1100/Makefile | 3 ---
arch/arm/mach-sa1100/include/mach/generic.h | 1 +
drivers/cpufreq/Kconfig.arm | 6 +++++
drivers/cpufreq/Makefile | 2 ++
.../cpufreq/sa1100-cpufreq.c | 3 +--
.../cpufreq/sa1110-cpufreq.c | 3 +--
8 files changed, 24 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 70366b7..bbc8953 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2150,7 +2150,6 @@ endmenu
menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
-
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_IMX
@@ -2159,13 +2158,6 @@ config CPU_FREQ_IMX
select CPU_FREQ_TABLE
help
This enables the CPUfreq driver for i.MX CPUs.
-
-config CPU_FREQ_SA1100
- bool
-
-config CPU_FREQ_SA1110
- bool
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index ca14dbd..04f9784 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
config SA1100_CERF
bool "CerfBoard"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
@@ -47,7 +47,7 @@ endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
- # FIXME: select CPU_FREQ_SA11x0
+ # FIXME: select ARM_SA11x0_CPUFREQ
select SHARP_LOCOMO
select SHARP_PARAM
select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
config SA1100_H3100
bool "Compaq iPAQ H3100"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
- select CPU_FREQ_SA1100
+ select ARM_SA1100_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
config SA1100_JORNADA720
bool "HP Jornada 720"
- # FIXME: select CPU_FREQ_SA11x0
+ # FIXME: select ARM_SA11x0_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
- select CPU_FREQ_SA1100
+ select ARM_SA1100_CPUFREQ
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_LART
bool "LART"
- select CPU_FREQ_SA1100
+ select ARM_SA1100_CPUFREQ
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
config SA1100_NANOENGINE
bool "nanoEngine"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
select PCI
select PCI_NANOENGINE
help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
config SA1100_PLEB
bool "PLEB"
- select CPU_FREQ_SA1100
+ select ARM_SA1100_CPUFREQ
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
config SA1100_SHANNON
bool "Shannon"
- select CPU_FREQ_SA1100
+ select ARM_SA1100_CPUFREQ
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
config SA1100_SIMPAD
bool "Simpad"
- select CPU_FREQ_SA1110
+ select ARM_SA1110_CPUFREQ
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 1aed9e7..2732eef 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -8,9 +8,6 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
-
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h
new file mode 100644
index 0000000..665542e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 1ce61ba..f3f3b14 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -185,6 +185,12 @@ config ARM_S5PV210_CPUFREQ
If in doubt, say N.
+config ARM_SA1100_CPUFREQ
+ bool
+
+config ARM_SA1110_CPUFREQ
+ bool
+
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index a55e3e8..7356e0a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -71,6 +71,8 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/drivers/cpufreq/sa1100-cpufreq.c
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1100.c
rename to drivers/cpufreq/sa1100-cpufreq.c
index 3268761..cff18e8 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/drivers/cpufreq/sa1100-cpufreq.c
@@ -91,10 +91,9 @@
#include <asm/cputype.h>
+#include <mach/generic.h>
#include <mach/hardware.h>
-#include "generic.h"
-
struct sa1100_dram_regs {
int speed;
u32 mdcnfg;
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/drivers/cpufreq/sa1110-cpufreq.c
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1110.c
rename to drivers/cpufreq/sa1110-cpufreq.c
index 38a7733..39c90b6 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -27,10 +27,9 @@
#include <asm/cputype.h>
#include <asm/mach-types.h>
+#include <mach/generic.h>
#include <mach/hardware.h>
-#include "generic.h"
-
#undef DEBUG
struct sdram_params {
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of AVR32 based at32ap platform to
drivers/cpufreq.
Cc: [email protected]
Cc: Haavard Skinnemoen <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Hans-Christian Egtvedt <[email protected]>
---
arch/avr32/Kconfig | 13 -------------
arch/avr32/configs/atngw100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +-
arch/avr32/configs/atngw100_mrmt_defconfig | 2 +-
arch/avr32/configs/atngw100mkii_defconfig | 2 +-
arch/avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +-
arch/avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +-
arch/avr32/configs/atstk1002_defconfig | 2 +-
arch/avr32/configs/atstk1003_defconfig | 2 +-
arch/avr32/configs/atstk1004_defconfig | 2 +-
arch/avr32/configs/atstk1006_defconfig | 2 +-
arch/avr32/configs/favr-32_defconfig | 2 +-
arch/avr32/configs/hammerhead_defconfig | 2 +-
arch/avr32/configs/mimc200_defconfig | 2 +-
arch/avr32/mach-at32ap/Makefile | 1 -
drivers/cpufreq/Kconfig | 13 +++++++++++++
drivers/cpufreq/Makefile | 4 ++++
.../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0
19 files changed, 31 insertions(+), 28 deletions(-)
rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index c1a868d..22c4030 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE
def_bool y
menu "CPU Frequency scaling"
-
source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_AT32AP
- bool "CPU frequency driver for AT32AP"
- depends on CPU_FREQ && PLATFORM_AT32AP
- default n
- help
- This enables the CPU frequency driver for AT32AP processors.
-
- For details, take a look in <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
endmenu
endmenu
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index f4025db..d5aff36 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index c76a49b..4abcf43 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index 2d8ab08..18f3fa0 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index b189e0c..06e389c 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index 2e4de42..2518a13 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index fad3cd2..245ef6b 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index 2998623..fa6cbac 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index a582465..bbd5131 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 57a79df..c1cd726 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 1a49bd8..754ae56 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 206a1b6..58589d8 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index 0421498..57788a4 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 82f24eb..ba7c31e 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 1bee51f..0a8bfdc 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index 514c9a9..fc09ec4 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,7 +1,6 @@
obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
obj-y += hmatrix.o
obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
-obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
obj-$(CONFIG_PM) += pm.o
ifeq ($(CONFIG_PM_DEBUG),y)
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index cbcb21e..d7ce6cc 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -205,6 +205,19 @@ depends on ARM
source "drivers/cpufreq/Kconfig.arm"
endmenu
+menu "AVR32 CPU frequency scaling drivers"
+depends on AVR32
+
+config AVR32_AT32AP_CPUFREQ
+ bool "CPU frequency driver for AT32AP"
+ depends on PLATFORM_AT32AP
+ default n
+ help
+ This enables the CPU frequency driver for AT32AP processors.
+ If in doubt, say N.
+
+endmenu
+
menu "PowerPC CPU frequency scaling drivers"
depends on PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 7356e0a..36a93a6 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -79,3 +79,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
##################################################################################
# PowerPC platform drivers
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
+
+##################################################################################
+# Other platform drivers
+obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/drivers/cpufreq/at32ap-cpufreq.c
similarity index 100%
rename from arch/avr32/mach-at32ap/cpufreq.c
rename to drivers/cpufreq/at32ap-cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of IA64 architecture to drivers/cpufreq.
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Tony Luck <[email protected]>
---
arch/ia64/Kconfig | 6 ++---
arch/ia64/kernel/Makefile | 1 -
arch/ia64/kernel/cpufreq/Kconfig | 29 ----------------------
arch/ia64/kernel/cpufreq/Makefile | 2 --
drivers/cpufreq/Kconfig | 17 +++++++++++++
drivers/cpufreq/Makefile | 1 +
.../cpufreq/ia64-acpi-cpufreq.c | 1 -
7 files changed, 21 insertions(+), 36 deletions(-)
delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9a02f71..152b5f2 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -591,9 +591,9 @@ source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
if PM
-
-source "arch/ia64/kernel/cpufreq/Kconfig"
-
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
endif
endmenu
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index d959c84..20678a9 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o
obj-$(CONFIG_IA64_CYCLONE) += cyclone.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
diff --git a/arch/ia64/kernel/cpufreq/Kconfig b/arch/ia64/kernel/cpufreq/Kconfig
deleted file mode 100644
index 2d9d527..0000000
--- a/arch/ia64/kernel/cpufreq/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config IA64_ACPI_CPUFREQ
- tristate "ACPI Processor P-States driver"
- select CPU_FREQ_TABLE
- depends on ACPI_PROCESSOR
- help
- This driver adds a CPUFreq driver which utilizes the ACPI
- Processor Performance States.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- If in doubt, say N.
-
-endif # CPU_FREQ
-
-endmenu
-
diff --git a/arch/ia64/kernel/cpufreq/Makefile b/arch/ia64/kernel/cpufreq/Makefile
deleted file mode 100644
index 4838f2a..0000000
--- a/arch/ia64/kernel/cpufreq/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_IA64_ACPI_CPUFREQ) += acpi-cpufreq.o
-
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index d7ce6cc..a2f1600 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -218,6 +218,23 @@ config AVR32_AT32AP_CPUFREQ
endmenu
+menu "CPUFreq processor drivers"
+depends on IA64
+
+config IA64_ACPI_CPUFREQ
+ tristate "ACPI Processor P-States driver"
+ select CPU_FREQ_TABLE
+ depends on ACPI_PROCESSOR
+ help
+ This driver adds a CPUFreq driver which utilizes the ACPI
+ Processor Performance States.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+endmenu
+
menu "PowerPC CPU frequency scaling drivers"
depends on PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 751815d..aaa018c 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -86,3 +86,4 @@ obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
+obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c
similarity index 99%
rename from arch/ia64/kernel/cpufreq/acpi-cpufreq.c
rename to drivers/cpufreq/ia64-acpi-cpufreq.c
index 4700fef..c0075db 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -1,5 +1,4 @@
/*
- * arch/ia64/kernel/cpufreq/acpi-cpufreq.c
* This file provides the ACPI based P-state support. This
* module works with generic cpufreq infrastructure. Most of
* the code is based on i386 version
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of MIPS architecture to drivers/cpufreq.
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: John Crispin <[email protected]>
---
arch/mips/Kconfig | 9 ++++-
arch/mips/kernel/Makefile | 2 --
arch/mips/kernel/cpufreq/Kconfig | 41 ----------------------
arch/mips/kernel/cpufreq/Makefile | 5 ---
drivers/cpufreq/Kconfig | 18 ++++++++++
drivers/cpufreq/Makefile | 1 +
.../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
7 files changed, 27 insertions(+), 49 deletions(-)
delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
delete mode 100644 arch/mips/kernel/cpufreq/Makefile
rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cd2e21f..22e8417 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2539,7 +2539,14 @@ source "kernel/power/Kconfig"
endmenu
-source "arch/mips/kernel/cpufreq/Kconfig"
+config MIPS_EXTERNAL_TIMER
+ bool
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+menu "CPU Power Management"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
source "net/Kconfig"
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index f81d98f..c69ca65 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n
obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
-obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/
-
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig
deleted file mode 100644
index 58c601e..0000000
--- a/arch/mips/kernel/cpufreq/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-config MIPS_EXTERNAL_TIMER
- bool
-
-config MIPS_CPUFREQ
- bool
- default y
- depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
-
-if MIPS_CPUFREQ
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config LOONGSON2_CPUFREQ
- tristate "Loongson2 CPUFreq Driver"
- select CPU_FREQ_TABLE
- depends on MIPS_CPUFREQ
- help
- This option adds a CPUFreq driver for loongson processors which
- support software configurable cpu frequency.
-
- Loongson2F and it's successors support this feature.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- If in doubt, say N.
-
-endif # CPU_FREQ
-
-endmenu
-
-endif # MIPS_CPUFREQ
diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile
deleted file mode 100644
index 05a5715..0000000
--- a/arch/mips/kernel/cpufreq/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Linux/MIPS cpufreq.
-#
-
-obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index a2f1600..5030df5 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -235,6 +235,24 @@ config IA64_ACPI_CPUFREQ
endmenu
+menu "MIPS CPUFreq processor drivers"
+depends on MIPS
+
+config LOONGSON2_CPUFREQ
+ tristate "Loongson2 CPUFreq Driver"
+ select CPU_FREQ_TABLE
+ help
+ This option adds a CPUFreq driver for loongson processors which
+ support software configurable cpu frequency.
+
+ Loongson2F and it's successors support this feature.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+endmenu
+
menu "PowerPC CPU frequency scaling drivers"
depends on PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index aaa018c..f6226d1 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
+obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
similarity index 100%
rename from arch/mips/kernel/cpufreq/loongson2_cpufreq.c
rename to drivers/cpufreq/loongson2_cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.
Cc: Paul Mundt <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Paul Mundt <[email protected]>
---
arch/sh/Kconfig | 18 ------------------
arch/sh/kernel/Makefile | 1 -
drivers/cpufreq/Kconfig | 18 ++++++++++++++++++
drivers/cpufreq/Makefile | 1 +
.../kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 --
5 files changed, 19 insertions(+), 21 deletions(-)
rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5e85963..06e3163 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY
endmenu
menu "CPU Frequency scaling"
-
source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
- tristate "SuperH CPU Frequency driver"
- depends on CPU_FREQ
- select CPU_FREQ_TABLE
- help
- This adds the cpufreq driver for SuperH. Any CPU that supports
- clock rate rounding through the clock framework can use this
- driver. While it will make the kernel slightly larger, this is
- harmless for CPUs that don't support rate rounding. The driver
- will also generate a notice in the boot log before disabling
- itself if the CPU in question is not capable of rate rounding.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If unsure, say N.
-
endmenu
source "arch/sh/drivers/Kconfig"
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index f259b37..261c8bf 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 5030df5..602d5db 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -258,5 +258,23 @@ depends on PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
endmenu
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+ tristate "SuperH CPU Frequency driver"
+ select CPU_FREQ_TABLE
+ help
+ This adds the cpufreq driver for SuperH. Any CPU that supports
+ clock rate rounding through the clock framework can use this
+ driver. While it will make the kernel slightly larger, this is
+ harmless for CPUs that don't support rate rounding. The driver
+ will also generate a notice in the boot log before disabling
+ itself if the CPU in question is not capable of rate rounding.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If unsure, say N.
+endmenu
+
endif
endmenu
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6226d1..12607d9 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
diff --git a/arch/sh/kernel/cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
similarity index 99%
rename from arch/sh/kernel/cpufreq.c
rename to drivers/cpufreq/sh-cpufreq.c
index 88c8fee..73adb64 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -1,6 +1,4 @@
/*
- * arch/sh/kernel/cpufreq.c
- *
* cpufreq driver for the SuperH processors.
*
* Copyright (C) 2002 - 2012 Paul Mundt
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of UNICORE-2 architecture to drivers/cpufreq.
Cc: Guan Xuetao <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Guan Xuetao <[email protected]>
---
arch/unicore32/kernel/Makefile | 1 -
drivers/cpufreq/Makefile | 1 +
arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c | 2 +-
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
index fa497e0..607a72f 100644
--- a/arch/unicore32/kernel/Makefile
+++ b/arch/unicore32/kernel/Makefile
@@ -9,7 +9,6 @@ obj-y += setup.o signal.o sys.o stacktrace.o traps.o
obj-$(CONFIG_MODULES) += ksyms.o module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_CPU_FREQ) += cpu-ucv2.o
obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o
# obj-y for architecture PKUnity v3
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 12607d9..e47acff 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -89,3 +89,4 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
+obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/drivers/cpufreq/unicore2-cpufreq.c
similarity index 96%
rename from arch/unicore32/kernel/cpu-ucv2.c
rename to drivers/cpufreq/unicore2-cpufreq.c
index ba5a71c..12fc904 100644
--- a/arch/unicore32/kernel/cpu-ucv2.c
+++ b/drivers/cpufreq/unicore2-cpufreq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
+ * clock scaling for the UniCore-II
*
* Code specific to PKUnity SoC and UniCore ISA
*
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of SPARC architecture to drivers/cpufreq.
Cc: David S. Miller <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: David S. Miller <[email protected]>
---
arch/sparc/Kconfig | 23 ----------------------
arch/sparc/kernel/Makefile | 3 ---
drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++
drivers/cpufreq/Makefile | 2 ++
.../cpufreq/sparc-us2e-cpufreq.c | 0
.../cpufreq/sparc-us3-cpufreq.c | 0
6 files changed, 25 insertions(+), 26 deletions(-)
rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3d361f2..c85b761 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -254,29 +254,6 @@ config HOTPLUG_CPU
if SPARC64
source "drivers/cpufreq/Kconfig"
-
-config US3_FREQ
- tristate "UltraSPARC-III CPU Frequency driver"
- depends on CPU_FREQ
- select CPU_FREQ_TABLE
- help
- This adds the CPUFreq driver for UltraSPARC-III processors.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config US2E_FREQ
- tristate "UltraSPARC-IIe CPU Frequency driver"
- depends on CPU_FREQ
- select CPU_FREQ_TABLE
- help
- This adds the CPUFreq driver for UltraSPARC-IIe processors.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
endif
config US3_MC
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 6cf591b..5276fd4 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI) += pci_msi.o
obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o
-# sparc64 cpufreq
-obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
-obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
obj-$(CONFIG_US3_MC) += chmc.o
obj-$(CONFIG_KPROBES) += kprobes.o
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 602d5db..a1488f5 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -258,6 +258,29 @@ depends on PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
endmenu
+menu "SPARC CPU frequency scaling drivers"
+depends on SPARC64
+config SPARC_US3_CPUFREQ
+ tristate "UltraSPARC-III CPU Frequency driver"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for UltraSPARC-III processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+ tristate "UltraSPARC-IIe CPU Frequency driver"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+endmenu
+
menu "SH CPU Frequency scaling"
depends on SUPERH
config SH_CPU_FREQ
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index e47acff..db96d74 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -89,4 +89,6 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
+obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
+obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c
similarity index 100%
rename from arch/sparc/kernel/us2e_cpufreq.c
rename to drivers/cpufreq/sparc-us2e-cpufreq.c
diff --git a/arch/sparc/kernel/us3_cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c
similarity index 100%
rename from arch/sparc/kernel/us3_cpufreq.c
rename to drivers/cpufreq/sparc-us3-cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
---
Compile Tested only.
arch/powerpc/platforms/Kconfig | 31 ----------------------
arch/powerpc/platforms/pasemi/Makefile | 1 -
arch/powerpc/platforms/powermac/Makefile | 2 --
drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
drivers/cpufreq/Makefile | 3 +++
.../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
.../cpufreq/pmac32-cpufreq.c | 0
.../cpufreq/pmac64-cpufreq.c | 0
8 files changed, 29 insertions(+), 34 deletions(-)
rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 52de8bc..46a223f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -194,37 +194,6 @@ config PPC_IO_WORKAROUNDS
source "drivers/cpufreq/Kconfig"
-menu "CPU Frequency drivers"
- depends on CPU_FREQ
-
-config CPU_FREQ_PMAC
- bool "Support for Apple PowerBooks"
- depends on ADB_PMU && PPC32
- select CPU_FREQ_TABLE
- help
- This adds support for frequency switching on Apple PowerBooks,
- this currently includes some models of iBook & Titanium
- PowerBook.
-
-config CPU_FREQ_PMAC64
- bool "Support for some Apple G5s"
- depends on PPC_PMAC && PPC64
- select CPU_FREQ_TABLE
- help
- This adds support for frequency switching on Apple iMac G5,
- and some of the more recent desktop G5 machines as well.
-
-config PPC_PASEMI_CPUFREQ
- bool "Support for PA Semi PWRficient"
- depends on PPC_PASEMI
- default y
- select CPU_FREQ_TABLE
- help
- This adds the support for frequency switching on PA Semi
- PWRficient processors.
-
-endmenu
-
menu "CPUIdle driver"
source "drivers/cpuidle/Kconfig"
diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index ce6d789..8e8d4ca 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,3 +1,2 @@
obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o
obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o
-obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index ea47df6..52c6ce1 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -9,8 +9,6 @@ obj-y += pic.o setup.o time.o feature.o pci.o \
sleep.o low_i2c.o cache.o pfunc_core.o \
pfunc_base.o udbg_scc.o udbg_adb.o
obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
-obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
-obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really
# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really
# CONFIG_NVRAM=y
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index e76992f..2e5a007 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -5,3 +5,29 @@ config CPU_FREQ_MAPLE
help
This adds support for frequency switching on Maple 970FX
Evaluation Board and compatible boards (IBM JS2x blades).
+
+config CPU_FREQ_PMAC
+ bool "Support for Apple PowerBooks"
+ depends on ADB_PMU && PPC32
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple PowerBooks,
+ this currently includes some models of iBook & Titanium
+ PowerBook.
+
+config CPU_FREQ_PMAC64
+ bool "Support for some Apple G5s"
+ depends on PPC_PMAC && PPC64
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple iMac G5,
+ and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+ bool "Support for PA Semi PWRficient"
+ depends on PPC_PASEMI
+ select CPU_FREQ_TABLE
+ default y
+ help
+ This adds the support for frequency switching on PA Semi
+ PWRficient processors.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index db96d74..7b16092f 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -79,6 +79,9 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
##################################################################################
# PowerPC platform drivers
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
##################################################################################
# Other platform drivers
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
similarity index 100%
rename from arch/powerpc/platforms/pasemi/cpufreq.c
rename to drivers/cpufreq/pasemi-cpufreq.c
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/drivers/cpufreq/pmac32-cpufreq.c
similarity index 100%
rename from arch/powerpc/platforms/powermac/cpufreq_32.c
rename to drivers/cpufreq/pmac32-cpufreq.c
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/drivers/cpufreq/pmac64-cpufreq.c
similarity index 100%
rename from arch/powerpc/platforms/powermac/cpufreq_64.c
rename to drivers/cpufreq/pmac64-cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq.
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
---
Compile Tested only.
arch/powerpc/platforms/cell/Kconfig | 26 +---------------------
arch/powerpc/platforms/cell/Makefile | 3 ---
drivers/cpufreq/Kconfig.powerpc | 18 +++++++++++++++
drivers/cpufreq/Makefile | 3 +++
.../cpufreq/ppc_cbe_cpufreq.c | 2 +-
.../cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 +--
.../cpufreq/ppc_cbe_cpufreq_pmi.c | 3 +--
.../linux/ppc_cbe_cpufreq.h | 4 ++--
8 files changed, 27 insertions(+), 35 deletions(-)
rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 53aaefe..9978f59 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -113,34 +113,10 @@ config CBE_THERM
default m
depends on CBE_RAS && SPU_BASE
-config CBE_CPUFREQ
- tristate "CBE frequency scaling"
- depends on CBE_RAS && CPU_FREQ
- default m
- help
- This adds the cpufreq driver for Cell BE processors.
- For details, take a look at <file:Documentation/cpu-freq/>.
- If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
- bool "CBE frequency scaling using PMI interface"
- depends on CBE_CPUFREQ
- default n
- help
- Select this, if you want to use the PMI interface
- to switch frequencies. Using PMI, the
- processor will not only be able to run at lower speed,
- but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
- tristate
- depends on CBE_CPUFREQ_PMI_ENABLE
- default CBE_CPUFREQ
-
config PPC_PMI
tristate
default y
- depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+ depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
help
PMI (Platform Management Interrupt) is a way to
communicate with the BMC (Baseboard Management Controller).
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index a4a8935..fe053e7 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \
obj-$(CONFIG_CBE_RAS) += ras.o
obj-$(CONFIG_CBE_THERM) += cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o
-cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o
obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR) += cpufreq_spudemand.o
obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index 2e5a007..9e1ae94 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -1,3 +1,21 @@
+config CPU_FREQ_CBE
+ tristate "CBE frequency scaling"
+ depends on CBE_RAS && PPC_CELL
+ default m
+ help
+ This adds the cpufreq driver for Cell BE processors.
+ For details, take a look at <file:Documentation/cpu-freq/>.
+ If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+ bool "CBE frequency scaling using PMI interface"
+ depends on CPU_FREQ_CBE
+ default n
+ help
+ Select this, if you want to use the PMI interface to switch
+ frequencies. Using PMI, the processor will not only be able to run at
+ lower speed, but also at lower core voltage.
+
config CPU_FREQ_MAPLE
bool "Support for Maple 970FX Evaluation Board"
depends on PPC_MAPLE
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 7b16092f..bfefa22 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -78,6 +78,9 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
##################################################################################
# PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.c
rename to drivers/cpufreq/ppc_cbe_cpufreq.c
index 718c6a3..6d7a51d 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -23,11 +23,11 @@
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/of_platform.h>
+#include <linux/ppc_cbe_cpufreq.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
static DEFINE_MUTEX(cbe_switch_mutex);
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
similarity index 98%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 20472e4..6708710 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
@@ -25,13 +25,12 @@
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/ppc_cbe_cpufreq.h>
#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
-
/* to write to MIC register */
static u64 MIC_Slow_Fast_Timer_table[] = {
[0 ... 7] = 0x007fc00000000000ull,
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 60a07a4..448b888 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -25,6 +25,7 @@
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/of_platform.h>
+#include <linux/ppc_cbe_cpufreq.h>
#include <asm/processor.h>
#include <asm/prom.h>
@@ -35,8 +36,6 @@
#include <asm/time.h>
#endif
-#include "cbe_cpufreq.h"
-
static u8 pmi_slow_mode_limit[MAX_CBE];
bool cbe_cpufreq_has_pmi = false;
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/include/linux/ppc_cbe_cpufreq.h
similarity index 82%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.h
rename to include/linux/ppc_cbe_cpufreq.h
index c1d86bf..b4c00a5 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.h
+++ b/include/linux/ppc_cbe_cpufreq.h
@@ -1,5 +1,5 @@
/*
- * cbe_cpufreq.h
+ * ppc_cbe_cpufreq.h
*
* This file contains the definitions used by the cbe_cpufreq driver.
*
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
+#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq drivers of CRIS architecture to drivers/cpufreq.
Cc: Jesper Nilsson <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Jesper Nilsson <[email protected]>
---
arch/cris/arch-v32/mach-a3/Makefile | 1 -
arch/cris/arch-v32/mach-fs/Makefile | 1 -
drivers/cpufreq/Makefile | 2 ++
.../mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c | 0
.../mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c | 0
5 files changed, 2 insertions(+), 2 deletions(-)
rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile
index d366e08..18a2271 100644
--- a/arch/cris/arch-v32/mach-a3/Makefile
+++ b/arch/cris/arch-v32/mach-a3/Makefile
@@ -3,7 +3,6 @@
#
obj-y := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
clean:
diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile
index d366e08..18a2271 100644
--- a/arch/cris/arch-v32/mach-fs/Makefile
+++ b/arch/cris/arch-v32/mach-fs/Makefile
@@ -3,7 +3,6 @@
#
obj-y := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
clean:
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 19de776..751815d 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -84,3 +84,5 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
# Other platform drivers
obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o
+obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
+obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
diff --git a/arch/cris/arch-v32/mach-a3/cpufreq.c b/drivers/cpufreq/cris-artpec3-cpufreq.c
similarity index 100%
rename from arch/cris/arch-v32/mach-a3/cpufreq.c
rename to drivers/cpufreq/cris-artpec3-cpufreq.c
diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/drivers/cpufreq/cris-etraxfs-cpufreq.c
similarity index 100%
rename from arch/cris/arch-v32/mach-fs/cpufreq.c
rename to drivers/cpufreq/cris-etraxfs-cpufreq.c
--
1.7.12.rc2.18.g61b472e
This patch moves cpufreq driver of BLACKFIN architecture to drivers/cpufreq.
Cc: Mike Frysinger <[email protected]>
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Steven Miao <[email protected]>
---
arch/blackfin/mach-common/Makefile | 1 -
drivers/cpufreq/Makefile | 1 +
.../blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c | 0
3 files changed, 1 insertion(+), 1 deletion(-)
rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 75f0ba2..675466d 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o
ifneq ($(CONFIG_BF60x),y)
obj-$(CONFIG_PM) += dpmc_modes.o
endif
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 36a93a6..19de776 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -83,3 +83,4 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
##################################################################################
# Other platform drivers
obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
+obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o
diff --git a/arch/blackfin/mach-common/cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c
similarity index 100%
rename from arch/blackfin/mach-common/cpufreq.c
rename to drivers/cpufreq/blackfin-cpufreq.c
--
1.7.12.rc2.18.g61b472e
On Thursday 04 April 2013, Viresh Kumar wrote:
> This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq.
>
> Cc: Arnd Bergmann <[email protected]>
> Cc: Benjamin Herrenschmidt <[email protected]>
> Cc: [email protected]
> Signed-off-by: Viresh Kumar <[email protected]>
> ---
> Compile Tested only.
>
> arch/powerpc/platforms/cell/Kconfig | 26 +---------------------
> arch/powerpc/platforms/cell/Makefile | 3 ---
> drivers/cpufreq/Kconfig.powerpc | 18 +++++++++++++++
> drivers/cpufreq/Makefile | 3 +++
> .../cpufreq/ppc_cbe_cpufreq.c | 2 +-
> .../cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 +--
> .../cpufreq/ppc_cbe_cpufreq_pmi.c | 3 +--
> .../linux/ppc_cbe_cpufreq.h | 4 ++--
Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h
header globally visible in include/linux/. Isn't it just used by as the
interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?
Arnd
On 4 April 2013 18:32, Arnd Bergmann <[email protected]> wrote:
> Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h
> header globally visible in include/linux/. Isn't it just used by as the
> interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?
When i moved it initially i thought it is also used by
arch/powerpc/platforms/cell/cpufreq_spudemand.c and hence moved it
to include/linux and never realized i am wrong..
Here is the fixup (And attached complete patch: original+fixup for Rafael
to apply):
Compile tested only.
---
drivers/cpufreq/ppc_cbe_cpufreq.c | 3 ++-
{include/linux => drivers/cpufreq}/ppc_cbe_cpufreq.h | 0
drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 ++-
drivers/cpufreq/ppc_cbe_cpufreq_pmi.c | 3 ++-
4 files changed, 6 insertions(+), 3 deletions(-)
rename {include/linux => drivers/cpufreq}/ppc_cbe_cpufreq.h (100%)
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c
b/drivers/cpufreq/ppc_cbe_cpufreq.c
index 138d88c..56e0c17 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -23,12 +23,13 @@
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/of_platform.h>
-#include <linux/ppc_cbe_cpufreq.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
+#include "ppc_cbe_cpufreq.h"
+
static DEFINE_MUTEX(cbe_switch_mutex);
diff --git a/include/linux/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
similarity index 100%
rename from include/linux/ppc_cbe_cpufreq.h
rename to drivers/cpufreq/ppc_cbe_cpufreq.h
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 6708710..84d2f2c 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
@@ -25,12 +25,13 @@
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/ppc_cbe_cpufreq.h>
#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
#include <asm/cell-regs.h>
+#include "ppc_cbe_cpufreq.h"
+
/* to write to MIC register */
static u64 MIC_Slow_Fast_Timer_table[] = {
[0 ... 7] = 0x007fc00000000000ull,
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 448b888..d29e8da 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -25,7 +25,6 @@
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/of_platform.h>
-#include <linux/ppc_cbe_cpufreq.h>
#include <asm/processor.h>
#include <asm/prom.h>
@@ -36,6 +35,8 @@
#include <asm/time.h>
#endif
+#include "ppc_cbe_cpufreq.h"
+
static u8 pmi_slow_mode_limit[MAX_CBE];
bool cbe_cpufreq_has_pmi = false;
On Thursday 04 April 2013, Viresh Kumar wrote:
>
> On 4 April 2013 18:32, Arnd Bergmann <[email protected]> wrote:
> > Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h
> > header globally visible in include/linux/. Isn't it just used by as the
> > interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?
>
> When i moved it initially i thought it is also used by
> arch/powerpc/platforms/cell/cpufreq_spudemand.c and hence moved it
> to include/linux and never realized i am wrong..
>
> Here is the fixup (And attached complete patch: original+fixup for Rafael
> to apply):
Acked-by: Arnd Bergmann <[email protected]>
On Thursday, April 04, 2013 06:24:08 PM Viresh Kumar wrote:
> Hi Rafael,
>
> These are all the remaining patches i have for 3.10. All of them have received
> Acks from their maintainers leaving powerpc ones. I have got an additional patch
> for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.
>
> Please consider them for applying to your bleeding-edge or linux-next.
Patches [1-16/18] plus the fixed-up [18/18] (slightly modified due to the
ordering change) applied to bleeding-edge. For [17/18] I need an ACK from the
powerpc side.
Thanks,
Rafael
> -------------x--------------x-------------
>
> This patchset targets towards moving all platform specific cpufreq drivers to
> drivers/cpufreq. This will lead to better consolidation code in future too.
>
> All ARM and powerpc patches are compile tested by me.
>
> Changes since earlier version:
> - Additional patch 18/18
>
> Viresh Kumar (18):
> cpufreq: ARM: Arrange drivers in alphabetical order
> cpufreq: tegra: Move driver to drivers/cpufreq
> cpufreq: davinci: move cpufreq driver to drivers/cpufreq
> cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq
> cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq
> cpufreq: integrator: move cpufreq driver to drivers/cpufreq
> cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
> cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
> cpufreq: AVR32: move cpufreq driver to drivers/cpufreq
> cpufreq: blackfin: move cpufreq driver to drivers/cpufreq
> cpufreq: cris: move cpufreq driver to drivers/cpufreq
> cpufreq: ia64: move cpufreq driver to drivers/cpufreq
> cpufreq: mips: move cpufreq driver to drivers/cpufreq
> cpufreq: sh: move cpufreq driver to drivers/cpufreq
> cpufreq: unicore2: move cpufreq driver to drivers/cpufreq
> cpufreq: sparc: move cpufreq driver to drivers/cpufreq
> cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
> cpufreq: powerpc/platforms/cell: move cpufreq driver to
> drivers/cpufreq
>
> arch/arm/Kconfig | 72 --------
> arch/arm/mach-davinci/Makefile | 1 -
> arch/arm/mach-integrator/Makefile | 1 -
> arch/arm/mach-pxa/Makefile | 6 -
> arch/arm/mach-pxa/include/mach/generic.h | 1 +
> arch/arm/mach-s3c24xx/Kconfig | 66 +++-----
> arch/arm/mach-s3c24xx/Makefile | 6 -
> arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h | 0
> arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +-
> arch/arm/mach-sa1100/Kconfig | 26 +--
> arch/arm/mach-sa1100/Makefile | 3 -
> arch/arm/mach-sa1100/include/mach/generic.h | 1 +
> arch/arm/mach-tegra/Makefile | 1 -
> arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 +-
> arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +-
> arch/avr32/Kconfig | 13 --
> arch/avr32/configs/atngw100_defconfig | 2 +-
> arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +-
> arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +-
> arch/avr32/configs/atngw100_mrmt_defconfig | 2 +-
> arch/avr32/configs/atngw100mkii_defconfig | 2 +-
> .../avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +-
> .../avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +-
> arch/avr32/configs/atstk1002_defconfig | 2 +-
> arch/avr32/configs/atstk1003_defconfig | 2 +-
> arch/avr32/configs/atstk1004_defconfig | 2 +-
> arch/avr32/configs/atstk1006_defconfig | 2 +-
> arch/avr32/configs/favr-32_defconfig | 2 +-
> arch/avr32/configs/hammerhead_defconfig | 2 +-
> arch/avr32/configs/mimc200_defconfig | 2 +-
> arch/avr32/mach-at32ap/Makefile | 1 -
> arch/blackfin/mach-common/Makefile | 1 -
> arch/cris/arch-v32/mach-a3/Makefile | 1 -
> arch/cris/arch-v32/mach-fs/Makefile | 1 -
> arch/ia64/Kconfig | 6 +-
> arch/ia64/kernel/Makefile | 1 -
> arch/ia64/kernel/cpufreq/Kconfig | 29 ----
> arch/ia64/kernel/cpufreq/Makefile | 2 -
> arch/mips/Kconfig | 9 +-
> arch/mips/kernel/Makefile | 2 -
> arch/mips/kernel/cpufreq/Kconfig | 41 -----
> arch/mips/kernel/cpufreq/Makefile | 5 -
> arch/powerpc/platforms/Kconfig | 31 ----
> arch/powerpc/platforms/cell/Kconfig | 26 +--
> arch/powerpc/platforms/cell/Makefile | 3 -
> arch/powerpc/platforms/pasemi/Makefile | 1 -
> arch/powerpc/platforms/powermac/Makefile | 2 -
> arch/sh/Kconfig | 18 --
> arch/sh/kernel/Makefile | 1 -
> arch/sparc/Kconfig | 23 ---
> arch/sparc/kernel/Makefile | 3 -
> arch/unicore32/kernel/Makefile | 1 -
> drivers/cpufreq/Kconfig | 89 ++++++++++
> drivers/cpufreq/Kconfig.arm | 184 ++++++++++++++-------
> drivers/cpufreq/Kconfig.powerpc | 44 +++++
> drivers/cpufreq/Makefile | 42 ++++-
> .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0
> .../cpufreq/blackfin-cpufreq.c | 0
> .../cpufreq/cris-artpec3-cpufreq.c | 0
> .../cpufreq/cris-etraxfs-cpufreq.c | 0
> .../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 -
> .../cpufreq/ia64-acpi-cpufreq.c | 1 -
> .../cpu.c => drivers/cpufreq/integrator-cpufreq.c | 2 -
> .../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
> .../cpufreq/pmac32-cpufreq.c | 0
> .../cpufreq/pmac64-cpufreq.c | 0
> .../cpufreq/ppc_cbe_cpufreq.c | 2 +-
> .../cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 +-
> .../cpufreq/ppc_cbe_cpufreq_pmi.c | 3 +-
> .../cpufreq/pxa2xx-cpufreq.c | 2 -
> .../cpufreq/pxa3xx-cpufreq.c | 5 +-
> .../cpufreq/s3c2410-cpufreq.c | 0
> .../cpufreq/s3c2412-cpufreq.c | 3 +-
> .../cpufreq/s3c2440-cpufreq.c | 0
> .../cpufreq/s3c24xx-cpufreq-debugfs.c | 0
> .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c | 0
> .../cpufreq/sa1100-cpufreq.c | 3 +-
> .../cpufreq/sa1110-cpufreq.c | 3 +-
> .../cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 -
> .../cpufreq/sparc-us2e-cpufreq.c | 0
> .../cpufreq/sparc-us3-cpufreq.c | 0
> .../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 -
> .../cpufreq/unicore2-cpufreq.c | 2 +-
> .../linux/ppc_cbe_cpufreq.h | 4 +-
> 85 files changed, 385 insertions(+), 464 deletions(-)
> create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
> rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
> create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
> delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
> delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
> delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
> delete mode 100644 arch/mips/kernel/cpufreq/Makefile
> rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
> rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
> rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
> rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
> rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
> rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
> rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
> rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
> rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
> rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
> rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
> rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
> rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
> rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
> rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
> rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
> rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
> rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
> rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
> rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
> rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 5 April 2013 04:06, Rafael J. Wysocki <[email protected]> wrote:
> On Thursday, April 04, 2013 06:24:08 PM Viresh Kumar wrote:
>> Hi Rafael,
>>
>> These are all the remaining patches i have for 3.10. All of them have received
>> Acks from their maintainers leaving powerpc ones. I have got an additional patch
>> for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.
>>
>> Please consider them for applying to your bleeding-edge or linux-next.
>
> Patches [1-16/18] plus the fixed-up [18/18] (slightly modified due to the
> ordering change) applied to bleeding-edge. For [17/18] I need an ACK from the
> powerpc side.
Thanks.
On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>
> Cc: Benjamin Herrenschmidt <[email protected]>
> Cc: Paul Mackerras <[email protected]>
> Cc: Olof Johansson <[email protected]>
> Cc: [email protected]
> Signed-off-by: Viresh Kumar <[email protected]>
> ---
> Compile Tested only.
>
> arch/powerpc/platforms/Kconfig | 31 ----------------------
> arch/powerpc/platforms/pasemi/Makefile | 1 -
> arch/powerpc/platforms/powermac/Makefile | 2 --
> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
> drivers/cpufreq/Makefile | 3 +++
> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
> .../cpufreq/pmac32-cpufreq.c | 0
> .../cpufreq/pmac64-cpufreq.c | 0
> 8 files changed, 29 insertions(+), 34 deletions(-)
> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Hi Deepthi,
Can you help testing this please?
Viresh Kumar wrote:
>
> This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to
> drivers/cpufreq.
>
> Cc: Ben Dooks <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Viresh Kumar <[email protected]>
> Acked-by: Arnd Bergmann <[email protected]>
> ---
> arch/arm/Kconfig | 46 ---------------
> arch/arm/mach-s3c24xx/Kconfig | 66
+++++++++-------------
> arch/arm/mach-s3c24xx/Makefile | 6 --
> arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h | 0
> arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +-
> arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
> arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +-
> drivers/cpufreq/Kconfig.arm | 58
+++++++++++++++++++
> drivers/cpufreq/Makefile | 5 ++
> .../cpufreq/s3c2410-cpufreq.c | 0
> .../cpufreq/s3c2412-cpufreq.c | 3 +-
> .../cpufreq/s3c2440-cpufreq.c | 0
> .../cpufreq/s3c24xx-cpufreq-debugfs.c | 0
> .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c | 0
> 14 files changed, 100 insertions(+), 102 deletions(-)
> rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c =>
> drivers/cpufreq/s3c2410-cpufreq.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c =>
> drivers/cpufreq/s3c2412-cpufreq.c (99%)
> rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c =>
> drivers/cpufreq/s3c2440-cpufreq.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c =>
> drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
> rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-
> cpufreq.c (100%)
>
Basically, this moving looks good to me, but should be re-worked based on
for-next of samsung tree because this touches too many samsung stuff so this
should be sent to upstream via samsung tree.
See below,
Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
error: patch failed: arch/arm/Kconfig:2166
error: arch/arm/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
error: patch failed: drivers/cpufreq/Makefile:63
error: drivers/cpufreq/Makefile: patch does not apply
error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index
Patch failed at 0001 cpufreq: s3c24xx: move cpufreq driver to
drivers/cpufreq
Thanks.
- Kukjin
On 5 April 2013 12:18, Kukjin Kim <[email protected]> wrote:
> Basically, this moving looks good to me, but should be re-worked based on
> for-next of samsung tree because this touches too many samsung stuff so this
> should be sent to upstream via samsung tree.
Hmm... Its already applied in Rafael's tree. But it doesn't mean that
it can't be
moved to your tree if there is a issue.
What tree/branch? I used:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git for-next
> Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
> error: patch failed: arch/arm/Kconfig:2166
> error: arch/arm/Kconfig: patch does not apply
above two are obvious as you haven't applied other patches in this series.
> error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
> error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
> error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
> error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
> error: patch failed: drivers/cpufreq/Makefile:63
> error: drivers/cpufreq/Makefile: patch does not apply
Same here.
> error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index
I can still see it in for-next.
Attached is my patch based of your for-next
On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> On 5 April 2013 12:18, Kukjin Kim <[email protected]> wrote:
> > Basically, this moving looks good to me, but should be re-worked based on
> > for-next of samsung tree because this touches too many samsung stuff so this
> > should be sent to upstream via samsung tree.
>
> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> it can't be
> moved to your tree if there is a issue.
Well, I'm dropping it. Please merge via the Samsung tree.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 5 April 2013 12:36, Viresh Kumar <[email protected]> wrote:
> On 5 April 2013 12:18, Kukjin Kim <[email protected]> wrote:
>> Basically, this moving looks good to me, but should be re-worked based on
>> for-next of samsung tree because this touches too many samsung stuff so this
>> should be sent to upstream via samsung tree.
>
> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> it can't be
> moved to your tree if there is a issue.
>
> What tree/branch? I used:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git for-next
>
>> Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
>> error: patch failed: arch/arm/Kconfig:2166
>> error: arch/arm/Kconfig: patch does not apply
>
> above two are obvious as you haven't applied other patches in this series.
>
>> error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
>> error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
>> error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
>> error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
>> error: patch failed: drivers/cpufreq/Makefile:63
>> error: drivers/cpufreq/Makefile: patch does not apply
>
> Same here.
>
>> error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index
>
> I can still see it in for-next.
>
> Attached is my patch based of your for-next
Kukjin,
As Rafael has already dropped it, can you apply it at your end and make sure
it doesn't miss the merge cycle?
Rafael J. Wysocki wrote:
>
> On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> > On 5 April 2013 12:18, Kukjin Kim <[email protected]> wrote:
> > > Basically, this moving looks good to me, but should be re-worked based
> on
> > > for-next of samsung tree because this touches too many samsung stuff
> so this
> > > should be sent to upstream via samsung tree.
> >
> > Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> > it can't be
> > moved to your tree if there is a issue.
>
> Well, I'm dropping it. Please merge via the Samsung tree.
>
OK, I will.
I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.
Thanks.
- Kukjin
On 8 April 2013 14:45, Kukjin Kim <[email protected]> wrote:
> Rafael J. Wysocki wrote:
>> Well, I'm dropping it. Please merge via the Samsung tree.
>>
> OK, I will.
>
> I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.
Ahh.. I forgot to remove it. I picked the initial patch from Rafael's tree.
But yes, you need it anyway :)
On Monday, April 08, 2013 06:15:09 PM Kukjin Kim wrote:
> Rafael J. Wysocki wrote:
> >
> > On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> > > On 5 April 2013 12:18, Kukjin Kim <[email protected]> wrote:
> > > > Basically, this moving looks good to me, but should be re-worked based
> > on
> > > > for-next of samsung tree because this touches too many samsung stuff
> > so this
> > > > should be sent to upstream via samsung tree.
> > >
> > > Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> > > it can't be
> > > moved to your tree if there is a issue.
> >
> > Well, I'm dropping it. Please merge via the Samsung tree.
> >
> OK, I will.
>
> I got patch file from Viresh, and there is a sign from Rafael,
> but it should be ack. So Rafael, let me use your ack on this patch when
> I apply. If any problems, please let me know.
Since it was signed-off by me before, you can assume it's been ACKed as well.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
Rafael J. Wysocki wrote:
[...]
> > >
> > > Well, I'm dropping it. Please merge via the Samsung tree.
> > >
> > OK, I will.
> >
> > I got patch file from Viresh, and there is a sign from Rafael,
> > but it should be ack. So Rafael, let me use your ack on this patch when
> > I apply. If any problems, please let me know.
>
> Since it was signed-off by me before, you can assume it's been ACKed as
> well.
>
Thanks.
- Kukjin
On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>
>> Cc: Benjamin Herrenschmidt <[email protected]>
>> Cc: Paul Mackerras <[email protected]>
>> Cc: Olof Johansson <[email protected]>
>> Cc: [email protected]
>> Signed-off-by: Viresh Kumar <[email protected]>
>> ---
>> Compile Tested only.
>>
>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>> arch/powerpc/platforms/powermac/Makefile | 2 --
>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>> drivers/cpufreq/Makefile | 3 +++
>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>> .../cpufreq/pmac32-cpufreq.c | 0
>> .../cpufreq/pmac64-cpufreq.c | 0
>> 8 files changed, 29 insertions(+), 34 deletions(-)
>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>
> Hi Deepthi,
>
> Can you help testing this please?
Ping!!
On Thu, Apr 04, 2013 at 06:24:22PM +0530, Viresh Kumar wrote:
> This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.
Why?
I am missing the cover email where I assume the explanation lies.
>
> Cc: Paul Mundt <[email protected]>
> Cc: [email protected]
> Signed-off-by: Viresh Kumar <[email protected]>
> Acked-by: Paul Mundt <[email protected]>
> ---
> arch/sh/Kconfig | 18 ------------------
> arch/sh/kernel/Makefile | 1 -
> drivers/cpufreq/Kconfig | 18 ++++++++++++++++++
> drivers/cpufreq/Makefile | 1 +
> .../kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 --
> 5 files changed, 19 insertions(+), 21 deletions(-)
> rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
>
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index 5e85963..06e3163 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY
> endmenu
>
> menu "CPU Frequency scaling"
> -
> source "drivers/cpufreq/Kconfig"
> -
> -config SH_CPU_FREQ
> - tristate "SuperH CPU Frequency driver"
> - depends on CPU_FREQ
> - select CPU_FREQ_TABLE
> - help
> - This adds the cpufreq driver for SuperH. Any CPU that supports
> - clock rate rounding through the clock framework can use this
> - driver. While it will make the kernel slightly larger, this is
> - harmless for CPUs that don't support rate rounding. The driver
> - will also generate a notice in the boot log before disabling
> - itself if the CPU in question is not capable of rate rounding.
> -
> - For details, take a look at <file:Documentation/cpu-freq>.
> -
> - If unsure, say N.
> -
> endmenu
>
> source "arch/sh/drivers/Kconfig"
> diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
> index f259b37..261c8bf 100644
> --- a/arch/sh/kernel/Makefile
> +++ b/arch/sh/kernel/Makefile
> @@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/
> obj-$(CONFIG_SMP) += smp.o
> obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
> obj-$(CONFIG_KGDB) += kgdb.o
> -obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
> obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o
> obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
> obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> index 5030df5..602d5db 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -258,5 +258,23 @@ depends on PPC32 || PPC64
> source "drivers/cpufreq/Kconfig.powerpc"
> endmenu
>
> +menu "SH CPU Frequency scaling"
> +depends on SUPERH
> +config SH_CPU_FREQ
> + tristate "SuperH CPU Frequency driver"
> + select CPU_FREQ_TABLE
> + help
> + This adds the cpufreq driver for SuperH. Any CPU that supports
> + clock rate rounding through the clock framework can use this
> + driver. While it will make the kernel slightly larger, this is
> + harmless for CPUs that don't support rate rounding. The driver
> + will also generate a notice in the boot log before disabling
> + itself if the CPU in question is not capable of rate rounding.
> +
> + For details, take a look at <file:Documentation/cpu-freq>.
> +
> + If unsure, say N.
> +endmenu
> +
> endif
> endmenu
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index f6226d1..12607d9 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -88,3 +88,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
> obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
> obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
> obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
> +obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
> diff --git a/arch/sh/kernel/cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
> similarity index 99%
> rename from arch/sh/kernel/cpufreq.c
> rename to drivers/cpufreq/sh-cpufreq.c
> index 88c8fee..73adb64 100644
> --- a/arch/sh/kernel/cpufreq.c
> +++ b/drivers/cpufreq/sh-cpufreq.c
> @@ -1,6 +1,4 @@
> /*
> - * arch/sh/kernel/cpufreq.c
> - *
> * cpufreq driver for the SuperH processors.
> *
> * Copyright (C) 2002 - 2012 Paul Mundt
> --
> 1.7.12.rc2.18.g61b472e
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On 9 April 2013 18:25, Simon Horman <[email protected]> wrote:
> On Thu, Apr 04, 2013 at 06:24:22PM +0530, Viresh Kumar wrote:
>> This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.
>
> Why?
>
> I am missing the cover email where I assume the explanation lies.
Hi Simon,
The idea was to keep all cpufreq drivers at a common and most suitable
place, so that future consolidation work can be done easily and efficiently.
So, functionally this patch shouldn't change anything.
On Tue, Apr 09, 2013 at 07:42:51PM +0530, Viresh Kumar wrote:
> On 9 April 2013 18:25, Simon Horman <[email protected]> wrote:
> > On Thu, Apr 04, 2013 at 06:24:22PM +0530, Viresh Kumar wrote:
> >> This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.
> >
> > Why?
> >
> > I am missing the cover email where I assume the explanation lies.
>
> Hi Simon,
>
> The idea was to keep all cpufreq drivers at a common and most suitable
> place, so that future consolidation work can be done easily and efficiently.
>
> So, functionally this patch shouldn't change anything.
Thanks, I understand.
I have no objections to this, but Paul should probably review it.
On 10 April 2013 07:42, Simon Horman <[email protected]> wrote:
> Thanks, I understand.
>
> I have no objections to this, but Paul should probably review it.
It is already Acked by him and applied by Rafael.
On Wed, Apr 10, 2013 at 08:21:51AM +0530, Viresh Kumar wrote:
> On 10 April 2013 07:42, Simon Horman <[email protected]> wrote:
> > Thanks, I understand.
> >
> > I have no objections to this, but Paul should probably review it.
>
> It is already Acked by him and applied by Rafael.
:)
On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>>
>>> Cc: Benjamin Herrenschmidt <[email protected]>
>>> Cc: Paul Mackerras <[email protected]>
>>> Cc: Olof Johansson <[email protected]>
>>> Cc: [email protected]
>>> Signed-off-by: Viresh Kumar <[email protected]>
>>> ---
>>> Compile Tested only.
>>>
>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>>> arch/powerpc/platforms/powermac/Makefile | 2 --
>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>>> drivers/cpufreq/Makefile | 3 +++
>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>>> .../cpufreq/pmac32-cpufreq.c | 0
>>> .../cpufreq/pmac64-cpufreq.c | 0
>>> 8 files changed, 29 insertions(+), 34 deletions(-)
>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>>
>> Hi Deepthi,
>>
>> Can you help testing this please?
>
> Ping!!
Ping!!
On 04/05/13 20:36, Rafael J. Wysocki wrote:
> On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
>> On 5 April 2013 12:18, Kukjin Kim<[email protected]> wrote:
>>> Basically, this moving looks good to me, but should be re-worked based on
>>> for-next of samsung tree because this touches too many samsung stuff so this
>>> should be sent to upstream via samsung tree.
>>
>> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
>> it can't be
>> moved to your tree if there is a issue.
>
> Well, I'm dropping it. Please merge via the Samsung tree.
>
Oops, I missed, maybe I have no more chance to send this to upstream for
upcoming merge window :-(
Rafael, please take this patch with my ack in your tree, sorry for noise.
Acked-by: Kukjin Kim <[email protected]>
If any problems, please kindly let me know.
Thanks.
- Kukjin
On Wednesday, April 24, 2013 12:25:59 AM Kukjin Kim wrote:
> On 04/05/13 20:36, Rafael J. Wysocki wrote:
> > On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> >> On 5 April 2013 12:18, Kukjin Kim<[email protected]> wrote:
> >>> Basically, this moving looks good to me, but should be re-worked based on
> >>> for-next of samsung tree because this touches too many samsung stuff so this
> >>> should be sent to upstream via samsung tree.
> >>
> >> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> >> it can't be
> >> moved to your tree if there is a issue.
> >
> > Well, I'm dropping it. Please merge via the Samsung tree.
> >
>
> Oops, I missed, maybe I have no more chance to send this to upstream for
> upcoming merge window :-(
>
> Rafael, please take this patch with my ack in your tree, sorry for noise.
>
> Acked-by: Kukjin Kim <[email protected]>
>
> If any problems, please kindly let me know.
Well, I suppose I can take the original patch, but then it will conflict with
your tree during merge. Is that not a problem?
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 04/24/13 07:59, Rafael J. Wysocki wrote:
[...]
>> Rafael, please take this patch with my ack in your tree, sorry for noise.
>>
>> Acked-by: Kukjin Kim<[email protected]>
>>
>> If any problems, please kindly let me know.
>
> Well, I suppose I can take the original patch, but then it will conflict with
> your tree during merge. Is that not a problem?
>
I think, some conflicts can be occurred but if so, we can fix it before
merge window.
- Kukjin
On Friday, April 26, 2013 01:48:19 AM Kukjin Kim wrote:
> On 04/24/13 07:59, Rafael J. Wysocki wrote:
>
> [...]
>
> >> Rafael, please take this patch with my ack in your tree, sorry for noise.
> >>
> >> Acked-by: Kukjin Kim<[email protected]>
> >>
> >> If any problems, please kindly let me know.
> >
> > Well, I suppose I can take the original patch, but then it will conflict with
> > your tree during merge. Is that not a problem?
> >
> I think, some conflicts can be occurred but if so, we can fix it before
> merge window.
Well, how exactly would you like to address them?
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 22 April 2013 12:19, Viresh Kumar <[email protected]> wrote:
> On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
>> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
>>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>>>
>>>> Cc: Benjamin Herrenschmidt <[email protected]>
>>>> Cc: Paul Mackerras <[email protected]>
>>>> Cc: Olof Johansson <[email protected]>
>>>> Cc: [email protected]
>>>> Signed-off-by: Viresh Kumar <[email protected]>
>>>> ---
>>>> Compile Tested only.
>>>>
>>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>>>> arch/powerpc/platforms/powermac/Makefile | 2 --
>>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>>>> drivers/cpufreq/Makefile | 3 +++
>>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>>>> .../cpufreq/pmac32-cpufreq.c | 0
>>>> .../cpufreq/pmac64-cpufreq.c | 0
>>>> 8 files changed, 29 insertions(+), 34 deletions(-)
>>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>>>
>>> Hi Deepthi,
>>>
>>> Can you help testing this please?
>>
>> Ping!!
>
> Ping!!
Hi Benjamin,
Hope you are back from your vacations. Can you give it a try now?
On 23 April 2013 20:55, Kukjin Kim <[email protected]> wrote:
> On 04/05/13 20:36, Rafael J. Wysocki wrote:
>>
>> On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
>>>
>>> On 5 April 2013 12:18, Kukjin Kim<[email protected]> wrote:
>>>>
>>>> Basically, this moving looks good to me, but should be re-worked based
>>>> on
>>>> for-next of samsung tree because this touches too many samsung stuff so
>>>> this
>>>> should be sent to upstream via samsung tree.
>>>
>>>
>>> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
>>> it can't be
>>> moved to your tree if there is a issue.
>>
>>
>> Well, I'm dropping it. Please merge via the Samsung tree.
>>
>
> Oops, I missed, maybe I have no more chance to send this to upstream for
> upcoming merge window :-(
>
> Rafael, please take this patch with my ack in your tree, sorry for noise.
>
> Acked-by: Kukjin Kim <[email protected]>
>
> If any problems, please kindly let me know.
Who is going to pick this patch now for next merge window?
On Monday, May 13, 2013 11:35:22 AM Viresh Kumar wrote:
> On 23 April 2013 20:55, Kukjin Kim <[email protected]> wrote:
> > On 04/05/13 20:36, Rafael J. Wysocki wrote:
> >>
> >> On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> >>>
> >>> On 5 April 2013 12:18, Kukjin Kim<[email protected]> wrote:
> >>>>
> >>>> Basically, this moving looks good to me, but should be re-worked based
> >>>> on
> >>>> for-next of samsung tree because this touches too many samsung stuff so
> >>>> this
> >>>> should be sent to upstream via samsung tree.
> >>>
> >>>
> >>> Hmm... Its already applied in Rafael's tree. But it doesn't mean that
> >>> it can't be
> >>> moved to your tree if there is a issue.
> >>
> >>
> >> Well, I'm dropping it. Please merge via the Samsung tree.
> >>
> >
> > Oops, I missed, maybe I have no more chance to send this to upstream for
> > upcoming merge window :-(
> >
> > Rafael, please take this patch with my ack in your tree, sorry for noise.
> >
> > Acked-by: Kukjin Kim <[email protected]>
> >
> > If any problems, please kindly let me know.
>
> Who is going to pick this patch now for next merge window?
That doesn't matter I suppose. I can take it, but please rebase it on top
of current linux-next.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 13 May 2013 16:21, Rafael J. Wysocki <[email protected]> wrote:
> That doesn't matter I suppose. I can take it, but please rebase it on top
> of current linux-next.
I have already done that (attached). But i wasn't sure what Kukjin wants as
he may report conflicts again and i will ask the same question for 3.12 :)
--
viresh
Viresh Kumar wrote:
>
> On 13 May 2013 16:21, Rafael J. Wysocki <[email protected]> wrote:
> > That doesn't matter I suppose. I can take it, but please rebase it on
> top
> > of current linux-next.
>
> I have already done that (attached). But i wasn't sure what Kukjin wants
> as
> he may report conflicts again and i will ask the same question for 3.12 :)
>
Since this missed last time, this would be sent to upstream via samsung tree
again. It means the conflicts should be handled by myself.
Rafael, if you don't mind, let me take this into Samsung tree for v3.11.
- Kukjin
On Tuesday, May 14, 2013 09:36:42 PM Kukjin Kim wrote:
> Viresh Kumar wrote:
> >
> > On 13 May 2013 16:21, Rafael J. Wysocki <[email protected]> wrote:
> > > That doesn't matter I suppose. I can take it, but please rebase it on
> > top
> > > of current linux-next.
> >
> > I have already done that (attached). But i wasn't sure what Kukjin wants
> > as
> > he may report conflicts again and i will ask the same question for 3.12 :)
> >
> Since this missed last time, this would be sent to upstream via samsung tree
> again. It means the conflicts should be handled by myself.
>
> Rafael, if you don't mind, let me take this into Samsung tree for v3.11.
Sure, please go ahead.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
On 13 May 2013 11:34, Viresh Kumar <[email protected]> wrote:
> On 22 April 2013 12:19, Viresh Kumar <[email protected]> wrote:
>> On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
>>> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
>>>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>>>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>>>>
>>>>> Cc: Benjamin Herrenschmidt <[email protected]>
>>>>> Cc: Paul Mackerras <[email protected]>
>>>>> Cc: Olof Johansson <[email protected]>
>>>>> Cc: [email protected]
>>>>> Signed-off-by: Viresh Kumar <[email protected]>
>>>>> ---
>>>>> Compile Tested only.
>>>>>
>>>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>>>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>>>>> arch/powerpc/platforms/powermac/Makefile | 2 --
>>>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>>>>> drivers/cpufreq/Makefile | 3 +++
>>>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>>>>> .../cpufreq/pmac32-cpufreq.c | 0
>>>>> .../cpufreq/pmac64-cpufreq.c | 0
>>>>> 8 files changed, 29 insertions(+), 34 deletions(-)
>>>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>>>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>>>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>>>>
>>>> Hi Deepthi,
>>>>
>>>> Can you help testing this please?
>>>
>>> Ping!!
>>
>> Ping!!
>
> Hi Benjamin,
>
> Hope you are back from your vacations. Can you give it a try now?
Ping!!
On 14 May 2013 18:30, Rafael J. Wysocki <[email protected]> wrote:
> On Tuesday, May 14, 2013 09:36:42 PM Kukjin Kim wrote:
>> Viresh Kumar wrote:
>> >
>> > On 13 May 2013 16:21, Rafael J. Wysocki <[email protected]> wrote:
>> > > That doesn't matter I suppose. I can take it, but please rebase it on
>> > top
>> > > of current linux-next.
>> >
>> > I have already done that (attached). But i wasn't sure what Kukjin wants
>> > as
>> > he may report conflicts again and i will ask the same question for 3.12 :)
>> >
>> Since this missed last time, this would be sent to upstream via samsung tree
>> again. It means the conflicts should be handled by myself.
>>
>> Rafael, if you don't mind, let me take this into Samsung tree for v3.11.
>
> Sure, please go ahead.
Kukjin,
I hope you have already applied this for linux-next?
On 05/20/13 14:29, Viresh Kumar wrote:
[...]
>>> Rafael, if you don't mind, let me take this into Samsung tree for v3.11.
>>
>> Sure, please go ahead.
>
> Kukjin,
>
> I hope you have already applied this for linux-next?
Yeah, already done in my local and you can see it in my public tree in a
couple of hours :-)
Thanks.
- Kukjin
On 20 May 2013 10:10, Viresh Kumar <[email protected]> wrote:
> On 13 May 2013 11:34, Viresh Kumar <[email protected]> wrote:
>> On 22 April 2013 12:19, Viresh Kumar <[email protected]> wrote:
>>> On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
>>>> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
>>>>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>>>>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>>>>>
>>>>>> Cc: Benjamin Herrenschmidt <[email protected]>
>>>>>> Cc: Paul Mackerras <[email protected]>
>>>>>> Cc: Olof Johansson <[email protected]>
>>>>>> Cc: [email protected]
>>>>>> Signed-off-by: Viresh Kumar <[email protected]>
>>>>>> ---
>>>>>> Compile Tested only.
>>>>>>
>>>>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>>>>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>>>>>> arch/powerpc/platforms/powermac/Makefile | 2 --
>>>>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>>>>>> drivers/cpufreq/Makefile | 3 +++
>>>>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>>>>>> .../cpufreq/pmac32-cpufreq.c | 0
>>>>>> .../cpufreq/pmac64-cpufreq.c | 0
>>>>>> 8 files changed, 29 insertions(+), 34 deletions(-)
>>>>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>>>>>
>>>>> Hi Deepthi,
>>>>>
>>>>> Can you help testing this please?
>>>>
>>>> Ping!!
>>>
>>> Ping!!
>>
>> Hi Benjamin,
>>
>> Hope you are back from your vacations. Can you give it a try now?
>
> Ping!!
Ping!!
On 31 May 2013 16:20, Viresh Kumar <[email protected]> wrote:
> On 20 May 2013 10:10, Viresh Kumar <[email protected]> wrote:
>> On 13 May 2013 11:34, Viresh Kumar <[email protected]> wrote:
>>> On 22 April 2013 12:19, Viresh Kumar <[email protected]> wrote:
>>>> On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
>>>>> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
>>>>>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
>>>>>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
>>>>>>>
>>>>>>> Cc: Benjamin Herrenschmidt <[email protected]>
>>>>>>> Cc: Paul Mackerras <[email protected]>
>>>>>>> Cc: Olof Johansson <[email protected]>
>>>>>>> Cc: [email protected]
>>>>>>> Signed-off-by: Viresh Kumar <[email protected]>
>>>>>>> ---
>>>>>>> Compile Tested only.
>>>>>>>
>>>>>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
>>>>>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
>>>>>>> arch/powerpc/platforms/powermac/Makefile | 2 --
>>>>>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
>>>>>>> drivers/cpufreq/Makefile | 3 +++
>>>>>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
>>>>>>> .../cpufreq/pmac32-cpufreq.c | 0
>>>>>>> .../cpufreq/pmac64-cpufreq.c | 0
>>>>>>> 8 files changed, 29 insertions(+), 34 deletions(-)
>>>>>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
>>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
>>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
>>>>>>
>>>>>> Hi Deepthi,
>>>>>>
>>>>>> Can you help testing this please?
>>>>>
>>>>> Ping!!
>>>>
>>>> Ping!!
>>>
>>> Hi Benjamin,
>>>
>>> Hope you are back from your vacations. Can you give it a try now?
>>
>> Ping!!
>
> Ping!!
Hi Rafael,
Its been more than 2 months now that this patch was first posted.
And the response from Maintainers isn't so great, irrespective of
how many times I pinged them.
This is what I think:
- It looked functionally correct to Benjamin but he wanted somebody
to actually test it.
- Arnd gave his Ack (So it looked functionally correct to him too)
- We can probably push this into linux-next now and see if somebody
complains of any breakage it has done. If not we can get it pushed for
3.11.
--
viresh
On Friday, June 07, 2013 10:48:21 AM Viresh Kumar wrote:
> On 31 May 2013 16:20, Viresh Kumar <[email protected]> wrote:
> > On 20 May 2013 10:10, Viresh Kumar <[email protected]> wrote:
> >> On 13 May 2013 11:34, Viresh Kumar <[email protected]> wrote:
> >>> On 22 April 2013 12:19, Viresh Kumar <[email protected]> wrote:
> >>>> On 9 April 2013 14:05, Viresh Kumar <[email protected]> wrote:
> >>>>> On 5 April 2013 12:16, Viresh Kumar <[email protected]> wrote:
> >>>>>> On 4 April 2013 18:24, Viresh Kumar <[email protected]> wrote:
> >>>>>>> This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
> >>>>>>>
> >>>>>>> Cc: Benjamin Herrenschmidt <[email protected]>
> >>>>>>> Cc: Paul Mackerras <[email protected]>
> >>>>>>> Cc: Olof Johansson <[email protected]>
> >>>>>>> Cc: [email protected]
> >>>>>>> Signed-off-by: Viresh Kumar <[email protected]>
> >>>>>>> ---
> >>>>>>> Compile Tested only.
> >>>>>>>
> >>>>>>> arch/powerpc/platforms/Kconfig | 31 ----------------------
> >>>>>>> arch/powerpc/platforms/pasemi/Makefile | 1 -
> >>>>>>> arch/powerpc/platforms/powermac/Makefile | 2 --
> >>>>>>> drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++
> >>>>>>> drivers/cpufreq/Makefile | 3 +++
> >>>>>>> .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
> >>>>>>> .../cpufreq/pmac32-cpufreq.c | 0
> >>>>>>> .../cpufreq/pmac64-cpufreq.c | 0
> >>>>>>> 8 files changed, 29 insertions(+), 34 deletions(-)
> >>>>>>> rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
> >>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
> >>>>>>> rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
> >>>>>>
> >>>>>> Hi Deepthi,
> >>>>>>
> >>>>>> Can you help testing this please?
> >>>>>
> >>>>> Ping!!
> >>>>
> >>>> Ping!!
> >>>
> >>> Hi Benjamin,
> >>>
> >>> Hope you are back from your vacations. Can you give it a try now?
> >>
> >> Ping!!
> >
> > Ping!!
>
> Hi Rafael,
>
> Its been more than 2 months now that this patch was first posted.
> And the response from Maintainers isn't so great, irrespective of
> how many times I pinged them.
>
> This is what I think:
> - It looked functionally correct to Benjamin but he wanted somebody
> to actually test it.
> - Arnd gave his Ack (So it looked functionally correct to him too)
> - We can probably push this into linux-next now and see if somebody
> complains of any breakage it has done. If not we can get it pushed for
> 3.11.
I agree, applied to bleeding-edge.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.