Dave,
Please pull the following batch of fixes for the 3.16 stream...
For the mac80211 bits, Johannes says:
"We have a fix from Eliad for a time calculation, a fix from Max for
head/tailroom when sending authentication packets, a revert that Felix
requested since the patch in question broke regulatory and a fix from
myself for an issue with a new command that we advertised in the wrong
place."
For the bluetooth bits, Gustavo says:
"A few fixes for 3.16. This pull request contains a NULL dereference fix,
and some security/pairing fixes."
For the iwlwifi bits, Emmanuel says:
"I have here a fix from Eliad for scheduled scan: it fixes a firmware
assertion. Arik reverts a patch I made that didn't take into account
that 3160 doesn't have UAPSD and hence, we can't assume that all
newer firmwares support the feature. Here too, the visible effect
is a firmware assertion. Along with that, we have a few fixes and
additions to the device list."
For the ath10k bits, Kalle says:
"Bartosz fixed an issue where we were not able to create 8 vdevs when
using DFS. Michal removed a false warning which was just confusing
people."
On top of that...
Arend van Spriel fixes a 'divide by zero' regression in brcmfmac.
Amitkumar Karwar corrects a transmit timeout in mwifiex.
---
The following changes since commit e940f5d6ba6a01f8dbb870854d5205d322452730:
ipv6: Fix MLD Query message check (2014-06-27 00:21:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
for you to fetch changes up to f9fa39e9ace5a8abbe9597c2970828ced67261da:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2014-06-27 13:35:56 -0400)
----------------------------------------------------------------
Amitkumar Karwar (1):
mwifiex: fix Tx timeout issue
Arend van Spriel (1):
brcmfmac: assign chip id and rev in bus interface after brcmf_usb_dlneeded
Arik Nemtsov (1):
Revert "iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag"
Bartosz Markowski (1):
ath10k: fix 8th virtual AP interface with DFS
Eliad Peller (2):
cfg80211: fix elapsed_jiffies calculation
iwlwifi: mvm: rework sched scan channel configuration
Johan Hedberg (3):
Bluetooth: Fix overriding higher security level in SMP
Bluetooth: Refactor authentication method lookup into its own function
Bluetooth: Fix rejecting pairing in case of insufficient capabilities
Johannes Berg (2):
Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"
nl80211: move set_qos_map command into split state
John W. Linville (5):
Merge git://git.kernel.org/.../jberg/mac80211
Merge branch 'for-john' of git://git.kernel.org/.../iwlwifi/iwlwifi-fixes
Merge branch 'for-upstream' of git://git.kernel.org/.../bluetooth/bluetooth
Merge branch 'ath-current' of git://github.com/kvalo/ath
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Loic Poulain (1):
Bluetooth: Ignore H5 non-link packets in non-active state
Lukasz Rymanowski (1):
Bluetooth: Fix for ACL disconnect when pairing fails
Marcel Holtmann (1):
Revert "Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012."
Max Stepanov (1):
mac80211: WEP extra head/tail room in ieee80211_send_auth
Michal Kazior (1):
ath10k: remove unnecessary htt rx corruption check
Oren Givon (1):
iwlwifi: update the 7265 series HW IDs
drivers/bluetooth/ath3k.c | 2 -
drivers/bluetooth/btusb.c | 1 -
drivers/bluetooth/hci_h5.c | 1 +
drivers/net/wireless/ath/ath10k/core.c | 6 ++-
drivers/net/wireless/ath/ath10k/htt_rx.c | 18 --------
drivers/net/wireless/brcm80211/brcmfmac/usb.c | 5 ++-
drivers/net/wireless/iwlwifi/iwl-fw.h | 1 +
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 7 +++
drivers/net/wireless/iwlwifi/mvm/scan.c | 65 ++++++++-------------------
drivers/net/wireless/iwlwifi/pcie/drv.c | 3 +-
drivers/net/wireless/mwifiex/main.c | 1 +
net/bluetooth/hci_conn.c | 12 ++++-
net/bluetooth/smp.c | 60 +++++++++++++++++++------
net/mac80211/util.c | 5 ++-
net/wireless/core.h | 2 +-
net/wireless/nl80211.c | 11 +++--
net/wireless/reg.c | 22 +++------
17 files changed, 112 insertions(+), 110 deletions(-)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f98380648cb3..f50dffc0374f 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0b05, 0x17d0) },
{ USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
- { USB_DEVICE(0x0CF3, 0x3005) },
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
@@ -140,7 +139,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a1c80b0c7663..6250fc2fb93a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -162,7 +162,6 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 04680ead9275..fede8ca7147c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -406,6 +406,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c)
H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
BT_ERR("Non-link packet received in non-active state");
h5_reset_rx(h5);
+ return 0;
}
h5->rx_func = h5_rx_payload;
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 82017f56e661..e6c56c5bb0f6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar)
if (status)
goto err_htc_stop;
- ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+ else
+ ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
INIT_LIST_HEAD(&ar->arvifs);
if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 6c102b1312ff..eebc860c3655 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
int msdu_len, msdu_chaining = 0;
struct sk_buff *msdu;
struct htt_rx_desc *rx_desc;
- bool corrupted = false;
lockdep_assert_held(&htt->rx_ring.lock);
@@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
RX_MSDU_END_INFO0_LAST_MSDU;
- if (msdu_chaining && !last_msdu)
- corrupted = true;
-
if (last_msdu) {
msdu->next = NULL;
break;
@@ -457,20 +453,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
msdu_chaining = -1;
/*
- * Apparently FW sometimes reports weird chained MSDU sequences with
- * more than one rx descriptor. This seems like a bug but needs more
- * analyzing. For the time being fix it by dropping such sequences to
- * avoid blowing up the host system.
- */
- if (corrupted) {
- ath10k_warn("failed to pop chained msdus, dropping\n");
- ath10k_htt_rx_free_msdu_chain(*head_msdu);
- *head_msdu = NULL;
- *tail_msdu = NULL;
- msdu_chaining = -EINVAL;
- }
-
- /*
* Don't refill the ring yet.
*
* First, the elements popped here are still in use - it is not
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 6db51a666f61..d06fcb05adf2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1184,8 +1184,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
bus->bus_priv.usb = bus_pub;
dev_set_drvdata(dev, bus);
bus->ops = &brcmf_usb_bus_ops;
- bus->chip = bus_pub->devid;
- bus->chiprev = bus_pub->chiprev;
bus->proto_type = BRCMF_PROTO_BCDC;
bus->always_use_fws_queue = true;
@@ -1194,6 +1192,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
if (ret)
goto fail;
}
+ bus->chip = bus_pub->devid;
+ bus->chiprev = bus_pub->chiprev;
+
/* request firmware here */
brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
brcmf_usb_probe_phase2);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 0aa7c0085c9f..b1a33322b9ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -88,6 +88,7 @@
* P2P client interfaces simultaneously if they are in different bindings.
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 7215f5980186..1cef708cb74d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -303,6 +303,13 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
}
+ if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT &&
+ !iwlwifi_mod_params.uapsd_disable) {
+ hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD;
+ hw->uapsd_queues = IWL_UAPSD_AC_INFO;
+ hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
+ }
+
hw->sta_data_size = sizeof(struct iwl_mvm_sta);
hw->vif_data_size = sizeof(struct iwl_mvm_vif);
hw->chanctx_data_size = sizeof(u16);
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 4b6c7d4bd199..eac2b424f6a0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -588,9 +588,7 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
struct iwl_scan_offload_cmd *scan,
struct iwl_mvm_scan_params *params)
{
- scan->channel_count =
- mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels +
- mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
+ scan->channel_count = req->n_channels;
scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
@@ -669,61 +667,37 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
struct cfg80211_sched_scan_request *req,
struct iwl_scan_channel_cfg *channels,
enum ieee80211_band band,
- int *head, int *tail,
+ int *head,
u32 ssid_bitmap,
struct iwl_mvm_scan_params *params)
{
- struct ieee80211_supported_band *s_band;
- int n_channels = req->n_channels;
- int i, j, index = 0;
- bool partial;
+ int i, index = 0;
- /*
- * We have to configure all supported channels, even if we don't want to
- * scan on them, but we have to send channels in the order that we want
- * to scan. So add requested channels to head of the list and others to
- * the end.
- */
- s_band = &mvm->nvm_data->bands[band];
-
- for (i = 0; i < s_band->n_channels && *head <= *tail; i++) {
- partial = false;
- for (j = 0; j < n_channels; j++)
- if (s_band->channels[i].center_freq ==
- req->channels[j]->center_freq) {
- index = *head;
- (*head)++;
- /*
- * Channels that came with the request will be
- * in partial scan .
- */
- partial = true;
- break;
- }
- if (!partial) {
- index = *tail;
- (*tail)--;
- }
- channels->channel_number[index] =
- cpu_to_le16(ieee80211_frequency_to_channel(
- s_band->channels[i].center_freq));
+ for (i = 0; i < req->n_channels; i++) {
+ struct ieee80211_channel *chan = req->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ index = *head;
+ (*head)++;
+
+ channels->channel_number[index] = cpu_to_le16(chan->hw_value);
channels->dwell_time[index][0] = params->dwell[band].active;
channels->dwell_time[index][1] = params->dwell[band].passive;
channels->iter_count[index] = cpu_to_le16(1);
channels->iter_interval[index] = 0;
- if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR))
+ if (!(chan->flags & IEEE80211_CHAN_NO_IR))
channels->type[index] |=
cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE);
channels->type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL);
- if (partial)
- channels->type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
+ cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL |
+ IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
- if (s_band->channels[i].flags & IEEE80211_CHAN_NO_HT40)
+ if (chan->flags & IEEE80211_CHAN_NO_HT40)
channels->type[index] |=
cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW);
@@ -740,7 +714,6 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
int head = 0;
- int tail = band_2ghz + band_5ghz - 1;
u32 ssid_bitmap;
int cmd_len;
int ret;
@@ -772,7 +745,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
&scan_cfg->scan_cmd.tx_cmd[0],
scan_cfg->data);
iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
- IEEE80211_BAND_2GHZ, &head, &tail,
+ IEEE80211_BAND_2GHZ, &head,
ssid_bitmap, ¶ms);
}
if (band_5ghz) {
@@ -782,7 +755,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
scan_cfg->data +
SCAN_OFFLOAD_PROBE_REQ_SIZE);
iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
- IEEE80211_BAND_5GHZ, &head, &tail,
+ IEEE80211_BAND_5GHZ, &head,
ssid_bitmap, ¶ms);
}
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 7091a18d5a72..98950e45c7b0 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -367,6 +367,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5412, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)},
@@ -380,7 +381,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
- {IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x9200, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)},
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index cbabc12fbda3..e91cd0fa5ca8 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -645,6 +645,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = skb->len;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ca01d1861854..a7a27bc2c0b1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -289,10 +289,20 @@ static void hci_conn_timeout(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn,
disc_work.work);
+ int refcnt = atomic_read(&conn->refcnt);
BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
- if (atomic_read(&conn->refcnt))
+ WARN_ON(refcnt < 0);
+
+ /* FIXME: It was observed that in pairing failed scenario, refcnt
+ * drops below 0. Probably this is because l2cap_conn_del calls
+ * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
+ * dropped. After that loop hci_chan_del is called which also drops
+ * conn. For now make sure that ACL is alive if refcnt is higher then 0,
+ * otherwise drop it.
+ */
+ if (refcnt > 0)
return;
switch (conn->state) {
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index f2829a7932e2..e33a982161c1 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -385,6 +385,16 @@ static const u8 gen_method[5][5] = {
{ CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP },
};
+static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io)
+{
+ /* If either side has unknown io_caps, use JUST WORKS */
+ if (local_io > SMP_IO_KEYBOARD_DISPLAY ||
+ remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ return JUST_WORKS;
+
+ return gen_method[remote_io][local_io];
+}
+
static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
u8 local_io, u8 remote_io)
{
@@ -401,14 +411,11 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io);
/* If neither side wants MITM, use JUST WORKS */
- /* If either side has unknown io_caps, use JUST WORKS */
/* Otherwise, look up method from the table */
- if (!(auth & SMP_AUTH_MITM) ||
- local_io > SMP_IO_KEYBOARD_DISPLAY ||
- remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ if (!(auth & SMP_AUTH_MITM))
method = JUST_WORKS;
else
- method = gen_method[remote_io][local_io];
+ method = get_auth_method(smp, local_io, remote_io);
/* If not bonding, don't ask user to confirm a Zero TK */
if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM)
@@ -669,7 +676,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
{
struct smp_cmd_pairing rsp, *req = (void *) skb->data;
struct smp_chan *smp;
- u8 key_size, auth;
+ u8 key_size, auth, sec_level;
int ret;
BT_DBG("conn %p", conn);
@@ -695,7 +702,19 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
/* We didn't start the pairing, so match remote */
auth = req->auth_req;
- conn->hcon->pending_sec_level = authreq_to_seclevel(auth);
+ sec_level = authreq_to_seclevel(auth);
+ if (sec_level > conn->hcon->pending_sec_level)
+ conn->hcon->pending_sec_level = sec_level;
+
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, conn->hcon->io_capability,
+ req->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
build_pairing_cmd(conn, req, &rsp, auth);
@@ -743,6 +762,16 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb)
if (check_enc_key_size(conn, key_size))
return SMP_ENC_KEY_SIZE;
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, req->io_capability,
+ rsp->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
+
get_random_bytes(smp->prnd, sizeof(smp->prnd));
smp->prsp[0] = SMP_CMD_PAIRING_RSP;
@@ -838,6 +867,7 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb)
struct smp_cmd_pairing cp;
struct hci_conn *hcon = conn->hcon;
struct smp_chan *smp;
+ u8 sec_level;
BT_DBG("conn %p", conn);
@@ -847,7 +877,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb)
if (!(conn->hcon->link_mode & HCI_LM_MASTER))
return SMP_CMD_NOTSUPP;
- hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
+ sec_level = authreq_to_seclevel(rp->auth_req);
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
@@ -901,9 +933,12 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
if (smp_sufficient_security(hcon, sec_level))
return 1;
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
+
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn, sec_level))
- goto done;
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
+ return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return 0;
@@ -918,7 +953,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
* requires it.
*/
if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
- sec_level > BT_SECURITY_MEDIUM)
+ hcon->pending_sec_level > BT_SECURITY_MEDIUM)
authreq |= SMP_AUTH_MITM;
if (hcon->link_mode & HCI_LM_MASTER) {
@@ -937,9 +972,6 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
set_bit(SMP_FLAG_INITIATOR, &smp->flags);
-done:
- hcon->pending_sec_level = sec_level;
-
return 0;
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 6886601afe1c..a6cda52ed920 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1096,11 +1096,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
int err;
/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
- skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+ 24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
if (!skb)
return;
- skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
memset(mgmt, 0, 24 + 6);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index e9afbf10e756..7e3a3cef7df9 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start)
if (end >= start)
return jiffies_to_msecs(end - start);
- return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+ return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
}
void
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ba4f1723c83a..6668daf69326 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
}
CMD(start_p2p_device, START_P2P_DEVICE);
CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+ CMD(testmode_cmd, TESTMODE);
+#endif
if (state->split) {
CMD(crit_proto_start, CRIT_PROTOCOL_START);
CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
CMD(channel_switch, CHANNEL_SWITCH);
+ CMD(set_qos_map, SET_QOS_MAP);
}
- CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
- CMD(testmode_cmd, TESTMODE);
-#endif
-
+ /* add into the if now */
#undef CMD
if (rdev->ops->connect || rdev->ops->auth) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 558b0e3a02d8..1afdf45db38f 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
- bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+ bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
if (band_rule_found && bw_fits)
return rr;
@@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
}
#endif
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
*/
static void handle_channel(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy,
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.
From: "John W. Linville" <[email protected]>
Date: Fri, 27 Jun 2014 14:43:06 -0400
> Please pull the following batch of fixes for the 3.16 stream...
Pulled, thanks John.