This file is not used for the driver compiling
Signed-off-by: Ivan Safonov <[email protected]>
---
drivers/staging/rtl8188eu/include/ieee80211_ext.h | 290 ----------------------
1 file changed, 290 deletions(-)
delete mode 100644 drivers/staging/rtl8188eu/include/ieee80211_ext.h
diff --git a/drivers/staging/rtl8188eu/include/ieee80211_ext.h b/drivers/staging/rtl8188eu/include/ieee80211_ext.h
deleted file mode 100644
index 15e53d3..0000000
--- a/drivers/staging/rtl8188eu/include/ieee80211_ext.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-#ifndef __IEEE80211_EXT_H
-#define __IEEE80211_EXT_H
-
-#include <osdep_service.h>
-#include <drv_types.h>
-
-#define WMM_OUI_TYPE 2
-#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
-#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
-#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
-#define WMM_VERSION 1
-
-#define WPA_PROTO_WPA BIT(0)
-#define WPA_PROTO_RSN BIT(1)
-
-#define WPA_KEY_MGMT_IEEE8021X BIT(0)
-#define WPA_KEY_MGMT_PSK BIT(1)
-#define WPA_KEY_MGMT_NONE BIT(2)
-#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
-#define WPA_KEY_MGMT_WPA_NONE BIT(4)
-
-
-#define WPA_CAPABILITY_PREAUTH BIT(0)
-#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
-#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
-
-
-#define PMKID_LEN 16
-
-
-struct wpa_ie_hdr {
- u8 elem_id;
- u8 len;
- u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
- u8 version[2]; /* little endian */
-} __packed;
-
-struct rsn_ie_hdr {
- u8 elem_id; /* WLAN_EID_RSN */
- u8 len;
- u8 version[2]; /* little endian */
-} __packed;
-
-struct wme_ac_parameter {
-#if defined(__LITTLE_ENDIAN)
- /* byte 1 */
- u8 aifsn:4,
- acm:1,
- aci:2,
- reserved:1;
-
- /* byte 2 */
- u8 eCWmin:4,
- eCWmax:4;
-#elif defined(__BIG_ENDIAN)
- /* byte 1 */
- u8 reserved:1,
- aci:2,
- acm:1,
- aifsn:4;
-
- /* byte 2 */
- u8 eCWmax:4,
- eCWmin:4;
-#else
-#error "Please fix <endian.h>"
-#endif
-
- /* bytes 3 & 4 */
- u16 txopLimit;
-} __packed;
-
-struct wme_parameter_element {
- /* required fields for WME version 1 */
- u8 oui[3];
- u8 oui_type;
- u8 oui_subtype;
- u8 version;
- u8 acInfo;
- u8 reserved;
- struct wme_ac_parameter ac[4];
-
-} __packed;
-
-#define WPA_PUT_LE16(a, val) \
- do { \
- (a)[1] = ((u16)(val)) >> 8; \
- (a)[0] = ((u16)(val)) & 0xff; \
- } while (0)
-
-#define WPA_PUT_BE32(a, val) \
- do { \
- (a)[0] = (u8)((((u32) (val)) >> 24) & 0xff); \
- (a)[1] = (u8)((((u32) (val)) >> 16) & 0xff); \
- (a)[2] = (u8)((((u32) (val)) >> 8) & 0xff); \
- (a)[3] = (u8)(((u32) (val)) & 0xff); \
- } while (0)
-
-#define WPA_PUT_LE32(a, val) \
- do { \
- (a)[3] = (u8)((((u32) (val)) >> 24) & 0xff); \
- (a)[2] = (u8)((((u32) (val)) >> 16) & 0xff); \
- (a)[1] = (u8)((((u32) (val)) >> 8) & 0xff); \
- (a)[0] = (u8)(((u32) (val)) & 0xff); \
- } while (0)
-
-#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
-
-/* Action category code */
-enum ieee80211_category {
- WLAN_CATEGORY_SPECTRUM_MGMT = 0,
- WLAN_CATEGORY_QOS = 1,
- WLAN_CATEGORY_DLS = 2,
- WLAN_CATEGORY_BACK = 3,
- WLAN_CATEGORY_HT = 7,
- WLAN_CATEGORY_WMM = 17,
-};
-
-/* SPECTRUM_MGMT action code */
-enum ieee80211_spectrum_mgmt_actioncode {
- WLAN_ACTION_SPCT_MSR_REQ = 0,
- WLAN_ACTION_SPCT_MSR_RPRT = 1,
- WLAN_ACTION_SPCT_TPC_REQ = 2,
- WLAN_ACTION_SPCT_TPC_RPRT = 3,
- WLAN_ACTION_SPCT_CHL_SWITCH = 4,
- WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
-};
-
-/* BACK action code */
-enum ieee80211_back_actioncode {
- WLAN_ACTION_ADDBA_REQ = 0,
- WLAN_ACTION_ADDBA_RESP = 1,
- WLAN_ACTION_DELBA = 2,
-};
-
-/* HT features action code */
-enum ieee80211_ht_actioncode {
- WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
- WLAN_ACTION_SM_PS = 1,
- WLAN_ACTION_PSPM = 2,
- WLAN_ACTION_PCO_PHASE = 3,
- WLAN_ACTION_MIMO_CSI_MX = 4,
- WLAN_ACTION_MIMO_NONCP_BF = 5,
- WLAN_ACTION_MIMP_CP_BF = 6,
- WLAN_ACTION_ASEL_INDICATES_FB = 7,
- WLAN_ACTION_HI_INFO_EXCHG = 8,
-};
-
-/* BACK (block-ack) parties */
-enum ieee80211_back_parties {
- WLAN_BACK_RECIPIENT = 0,
- WLAN_BACK_INITIATOR = 1,
- WLAN_BACK_TIMER = 2,
-};
-
-struct ieee80211_mgmt {
- u16 frame_control;
- u16 duration;
- u8 da[6];
- u8 sa[6];
- u8 bssid[6];
- u16 seq_ctrl;
- union {
- struct {
- u16 auth_alg;
- u16 auth_transaction;
- u16 status_code;
- /* possibly followed by Challenge text */
- u8 variable[0];
- } __packed auth;
- struct {
- u16 reason_code;
- } __packed deauth;
- struct {
- u16 capab_info;
- u16 listen_interval;
- /* followed by SSID and Supported rates */
- u8 variable[0];
- } __packed assoc_req;
- struct {
- u16 capab_info;
- u16 status_code;
- u16 aid;
- /* followed by Supported rates */
- u8 variable[0];
- } __packed assoc_resp, reassoc_resp;
- struct {
- u16 capab_info;
- u16 listen_interval;
- u8 current_ap[6];
- /* followed by SSID and Supported rates */
- u8 variable[0];
- } __packed reassoc_req;
- struct {
- u16 reason_code;
- } __packed disassoc;
- struct {
- __le64 timestamp;
- u16 beacon_int;
- u16 capab_info;
- /* followed by some of SSID, Supported rates,
- * FH Params, DS Params, CF Params, IBSS Params, TIM */
- u8 variable[0];
- } __packed beacon;
- struct {
- /* only variable items: SSID, Supported rates */
- u8 variable[0];
- } __packed probe_req;
- struct {
- __le64 timestamp;
- u16 beacon_int;
- u16 capab_info;
- /* followed by some of SSID, Supported rates,
- * FH Params, DS Params, CF Params, IBSS Params */
- u8 variable[0];
- } __packed probe_resp;
- struct {
- u8 category;
- union {
- struct {
- u8 action_code;
- u8 dialog_token;
- u8 status_code;
- u8 variable[0];
- } __packed wme_action;
- struct {
- u8 action_code;
- u8 dialog_token;
- u16 capab;
- u16 timeout;
- u16 start_seq_num;
- } __packed addba_req;
- struct {
- u8 action_code;
- u8 dialog_token;
- u16 status;
- u16 capab;
- u16 timeout;
- } __packed addba_resp;
- struct {
- u8 action_code;
- u16 params;
- u16 reason_code;
- } __packed delba;
- structi {
- u8 action_code;
- /* capab_info for open and confirm,
- * reason for close
- */
- u16 aux;
- /* Followed in plink_confirm by status
- * code, AID and supported rates,
- * and directly by supported rates in
- * plink_open and plink_close
- */
- u8 variable[0];
- } __packed plink_action;
- struct{
- u8 action_code;
- u8 variable[0];
- } __packed mesh_action;
- } __packed u;
- } __packed action;
- } __packed u;
-} __packed;
-
-/* mgmt header + 1 byte category code */
-#define IEEE80211_MIN_ACTION_SIZE \
- FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
-
-#endif
--
2.4.10