The major portion of the hub info is common to all cpus on that hub.
This is step one of moving the per cpu hub info to a per node hub info
struct. This patch creates the small per cpu info struct that will
contain only information specific to each CPU.
Signed-off-by: Mike Travis <[email protected]>
Reviewed-by: Dimitri Sivanich <[email protected]>
Tested-by: John Estabrook <[email protected]>
Tested-by: Gary Kroening <[email protected]>
---
arch/x86/include/asm/uv/uv_hub.h | 19 +++++++++++++++----
arch/x86/kernel/apic/x2apic_uv_x.c | 15 ++++++++++-----
2 files changed, 25 insertions(+), 9 deletions(-)
--- linux.orig/arch/x86/include/asm/uv/uv_hub.h
+++ linux/arch/x86/include/asm/uv/uv_hub.h
@@ -139,8 +139,9 @@ struct uv_scir_s {
/*
* The following defines attributes of the HUB chip. These attributes are
- * frequently referenced and are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
+ * frequently referenced and are kept in a common per hub struct.
+ * After setup, the struct is read only, so it should be readily
+ * available in the L3 cache on the cpu socket for the node.
*/
struct uv_hub_info_s {
unsigned long global_mmr_base;
@@ -167,9 +168,19 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __
#define uv_hub_info this_cpu_ptr(&__uv_hub_info)
#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))
+/* CPU specific info with a pointer to the hub common info struct */
+struct uv_cpu_info_s {
+ void *p_uv_hub_info;
+ unsigned char blade_cpu_id;
+ struct uv_scir_s scir;
+};
+DECLARE_PER_CPU(struct uv_cpu_info_s, __uv_cpu_info);
+
+#define uv_cpu_info this_cpu_ptr(&__uv_cpu_info)
+#define uv_cpu_info_per(cpu) (&per_cpu(__uv_cpu_info, cpu))
+
/*
- * Hub revisions less than UV2_HUB_REVISION_BASE are UV1 hubs. All UV2
- * hubs have revision numbers greater than or equal to UV2_HUB_REVISION_BASE.
+ * HUB revision ranges for each UV HUB architecture.
* This is a software convention - NOT the hardware revision numbers in
* the hub chip.
*/
--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -202,6 +202,9 @@ EXPORT_SYMBOL_GPL(is_uv_system);
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+DEFINE_PER_CPU(struct uv_cpu_info_s, __uv_cpu_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_cpu_info);
+
struct uv_blade_info *uv_blade_info;
EXPORT_SYMBOL_GPL(uv_blade_info);
@@ -950,11 +953,10 @@ void __init uv_system_init(void)
hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
/* uv_num_possible_blades() is really the hub count */
- pr_info("UV: Found %d blades, %d hubs\n",
- is_uv1_hub() ?
- uv_num_possible_blades() :
- (uv_num_possible_blades() + 1) / 2,
- uv_num_possible_blades());
+ pr_info("UV: Found %d hubs, %d nodes, %d cpus\n",
+ uv_num_possible_blades(),
+ num_possible_nodes(),
+ num_possible_cpus());
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kzalloc(bytes, GFP_KERNEL);
@@ -1017,6 +1019,9 @@ void __init uv_system_init(void)
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_node_to_blade[nodeid] = blade;
uv_cpu_to_blade[cpu] = blade;
+
+ /* Initialize per cpu info list */
+ uv_cpu_info_per(cpu)->p_uv_hub_info = uv_cpu_hub_info(cpu);
}
/* Add blade/pnode info for nodes without cpus */
--