When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
built-in, we get a link error:
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
This adds a Kconfig dependency to prevent etnaviv from being built-in
with CONFIG_THERMAL=m, while still allowing the valid configurations.
Unfortunately, simply adding the dependency here breaks Kconfig through
a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
which is the only video driver that explicitly selects 'THERMAL'. Turning
this into a 'depends on' addresses the problem.
For completeness, I'm also removing the redundant 'select THERMAL'
from INTEL_MENLOW, so no other driver uses that statement.
Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/acpi/Kconfig | 2 +-
drivers/gpu/drm/etnaviv/Kconfig | 1 +
drivers/platform/x86/Kconfig | 1 -
3 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 03cc4e74096b..252399efa8b3 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -184,7 +184,7 @@ config ACPI_VIDEO
tristate "Video"
depends on X86 && BACKLIGHT_CLASS_DEVICE
depends on INPUT
- select THERMAL
+ depends on THERMAL
help
This driver implements the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig
index 71cee4e9fefb..1d6c744e7924 100644
--- a/drivers/gpu/drm/etnaviv/Kconfig
+++ b/drivers/gpu/drm/etnaviv/Kconfig
@@ -3,6 +3,7 @@ config DRM_ETNAVIV
tristate "ETNAVIV (DRM support for Vivante GPU IP cores)"
depends on DRM
depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST)
+ depends on THERMAL || THERMAL=n
depends on MMU
select SHMEM
select SYNC_FILE
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index e229ea317b9c..76ced87efde5 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -544,7 +544,6 @@ config SENSORS_HDAPS
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
- select THERMAL
---help---
ACPI thermal management enhancement driver on
Intel Menlow platform.
--
2.9.0
On Wed, Apr 19, 2017 at 9:11 PM, Arnd Bergmann <[email protected]> wrote:
> When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
> built-in, we get a link error:
>
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
>
> This adds a Kconfig dependency to prevent etnaviv from being built-in
> with CONFIG_THERMAL=m, while still allowing the valid configurations.
> Unfortunately, simply adding the dependency here breaks Kconfig through
> a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
> which is the only video driver that explicitly selects 'THERMAL'. Turning
> this into a 'depends on' addresses the problem.
> For completeness, I'm also removing the redundant 'select THERMAL'
> from INTEL_MENLOW, so no other driver uses that statement.
>
For PDx86 part:
Acked-by: Andy Shevchenko <[email protected]>
> Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> drivers/acpi/Kconfig | 2 +-
> drivers/gpu/drm/etnaviv/Kconfig | 1 +
> drivers/platform/x86/Kconfig | 1 -
> 3 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 03cc4e74096b..252399efa8b3 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -184,7 +184,7 @@ config ACPI_VIDEO
> tristate "Video"
> depends on X86 && BACKLIGHT_CLASS_DEVICE
> depends on INPUT
> - select THERMAL
> + depends on THERMAL
> help
> This driver implements the ACPI Extensions For Display Adapters
> for integrated graphics devices on motherboard, as specified in
> diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig
> index 71cee4e9fefb..1d6c744e7924 100644
> --- a/drivers/gpu/drm/etnaviv/Kconfig
> +++ b/drivers/gpu/drm/etnaviv/Kconfig
> @@ -3,6 +3,7 @@ config DRM_ETNAVIV
> tristate "ETNAVIV (DRM support for Vivante GPU IP cores)"
> depends on DRM
> depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST)
> + depends on THERMAL || THERMAL=n
> depends on MMU
> select SHMEM
> select SYNC_FILE
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index e229ea317b9c..76ced87efde5 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -544,7 +544,6 @@ config SENSORS_HDAPS
> config INTEL_MENLOW
> tristate "Thermal Management driver for Intel menlow platform"
> depends on ACPI_THERMAL
> - select THERMAL
> ---help---
> ACPI thermal management enhancement driver on
> Intel Menlow platform.
> --
> 2.9.0
>
--
With Best Regards,
Andy Shevchenko
On Wed, Apr 19, 2017 at 08:11:16PM +0200, Arnd Bergmann wrote:
> When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
> built-in, we get a link error:
>
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
>
> This adds a Kconfig dependency to prevent etnaviv from being built-in
> with CONFIG_THERMAL=m, while still allowing the valid configurations.
> Unfortunately, simply adding the dependency here breaks Kconfig through
> a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
> which is the only video driver that explicitly selects 'THERMAL'. Turning
> this into a 'depends on' addresses the problem.
> For completeness, I'm also removing the redundant 'select THERMAL'
> from INTEL_MENLOW, so no other driver uses that statement.
>
> Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
> Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Eduardo Valentin <[email protected]>
> ---
> drivers/acpi/Kconfig | 2 +-
> drivers/gpu/drm/etnaviv/Kconfig | 1 +
> drivers/platform/x86/Kconfig | 1 -
> 3 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 03cc4e74096b..252399efa8b3 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -184,7 +184,7 @@ config ACPI_VIDEO
> tristate "Video"
> depends on X86 && BACKLIGHT_CLASS_DEVICE
> depends on INPUT
> - select THERMAL
> + depends on THERMAL
> help
> This driver implements the ACPI Extensions For Display Adapters
> for integrated graphics devices on motherboard, as specified in
> diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig
> index 71cee4e9fefb..1d6c744e7924 100644
> --- a/drivers/gpu/drm/etnaviv/Kconfig
> +++ b/drivers/gpu/drm/etnaviv/Kconfig
> @@ -3,6 +3,7 @@ config DRM_ETNAVIV
> tristate "ETNAVIV (DRM support for Vivante GPU IP cores)"
> depends on DRM
> depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST)
> + depends on THERMAL || THERMAL=n
> depends on MMU
> select SHMEM
> select SYNC_FILE
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index e229ea317b9c..76ced87efde5 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -544,7 +544,6 @@ config SENSORS_HDAPS
> config INTEL_MENLOW
> tristate "Thermal Management driver for Intel menlow platform"
> depends on ACPI_THERMAL
> - select THERMAL
> ---help---
> ACPI thermal management enhancement driver on
> Intel Menlow platform.
> --
> 2.9.0
>
Am Mittwoch, den 19.04.2017, 20:11 +0200 schrieb Arnd Bergmann:
> When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
> built-in, we get a link error:
>
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
> etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
>
> This adds a Kconfig dependency to prevent etnaviv from being built-in
> with CONFIG_THERMAL=m, while still allowing the valid configurations.
> Unfortunately, simply adding the dependency here breaks Kconfig through
> a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
> which is the only video driver that explicitly selects 'THERMAL'. Turning
> this into a 'depends on' addresses the problem.
> For completeness, I'm also removing the redundant 'select THERMAL'
> from INTEL_MENLOW, so no other driver uses that statement.
>
> Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
> Signed-off-by: Arnd Bergmann <[email protected]>
This patch mixes a few things, so the subject doesn't really fit. I'm
fine with taking the patch trough my tree, if I can get an ACK on the
ACPI part.
Regards,
Lucas
> ---
> drivers/acpi/Kconfig | 2 +-
> drivers/gpu/drm/etnaviv/Kconfig | 1 +
> drivers/platform/x86/Kconfig | 1 -
> 3 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 03cc4e74096b..252399efa8b3 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -184,7 +184,7 @@ config ACPI_VIDEO
> tristate "Video"
> depends on X86 && BACKLIGHT_CLASS_DEVICE
> depends on INPUT
> - select THERMAL
> + depends on THERMAL
> help
> This driver implements the ACPI Extensions For Display Adapters
> for integrated graphics devices on motherboard, as specified in
> diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig
> index 71cee4e9fefb..1d6c744e7924 100644
> --- a/drivers/gpu/drm/etnaviv/Kconfig
> +++ b/drivers/gpu/drm/etnaviv/Kconfig
> @@ -3,6 +3,7 @@ config DRM_ETNAVIV
> tristate "ETNAVIV (DRM support for Vivante GPU IP cores)"
> depends on DRM
> depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST)
> + depends on THERMAL || THERMAL=n
> depends on MMU
> select SHMEM
> select SYNC_FILE
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index e229ea317b9c..76ced87efde5 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -544,7 +544,6 @@ config SENSORS_HDAPS
> config INTEL_MENLOW
> tristate "Thermal Management driver for Intel menlow platform"
> depends on ACPI_THERMAL
> - select THERMAL
> ---help---
> ACPI thermal management enhancement driver on
> Intel Menlow platform.
On Mon, Apr 24, 2017 at 12:44 PM, Lucas Stach <[email protected]> wrote:
> Am Mittwoch, den 19.04.2017, 20:11 +0200 schrieb Arnd Bergmann:
>> When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
>> built-in, we get a link error:
>>
>> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
>> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
>> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
>> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
>> etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
>>
>> This adds a Kconfig dependency to prevent etnaviv from being built-in
>> with CONFIG_THERMAL=m, while still allowing the valid configurations.
>> Unfortunately, simply adding the dependency here breaks Kconfig through
>> a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
>> which is the only video driver that explicitly selects 'THERMAL'. Turning
>> this into a 'depends on' addresses the problem.
>> For completeness, I'm also removing the redundant 'select THERMAL'
>> from INTEL_MENLOW, so no other driver uses that statement.
>>
>> Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
>> Signed-off-by: Arnd Bergmann <[email protected]>
>
> This patch mixes a few things, so the subject doesn't really fit. I'm
> fine with taking the patch trough my tree, if I can get an ACK on the
> ACPI part.
Actually the ACPI part triggered a new warning that I haven't figured
out completely yet. Please disregard my patch for the moment.
I think we can just drop the dependency in ACPI_VIDEO, but I'm not
entirely sure yet if we could hit a broken configuration with THERMAL=m
and ACPI_VIDEO=y in that case. Unfortunately we cannot use the
same trick in ACPI_VIDEO that I used for ETNAVIV, because of
another circular dependency in ACPI.
Arnd
dg
On Mon, Apr 24, 2017 at 07:39:27PM +0200, Arnd Bergmann wrote:
> On Mon, Apr 24, 2017 at 12:44 PM, Lucas Stach <[email protected]> wrote:
> > Am Mittwoch, den 19.04.2017, 20:11 +0200 schrieb Arnd Bergmann:
> >> When CONFIG_THERMAL is enabled as a loadable module, and etnaviv is
> >> built-in, we get a link error:
> >>
> >> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
> >> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0x34): undefined reference to `thermal_of_cooling_device_register'
> >> etnaviv_gpu.c:(.text.etnaviv_gpu_bind+0xe0): undefined reference to `thermal_cooling_device_unregister'
> >> drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
> >> etnaviv_gpu.c:(.text.etnaviv_gpu_unbind+0xf0): undefined reference to `thermal_cooling_device_unregister'
> >>
> >> This adds a Kconfig dependency to prevent etnaviv from being built-in
> >> with CONFIG_THERMAL=m, while still allowing the valid configurations.
> >> Unfortunately, simply adding the dependency here breaks Kconfig through
> >> a dependency loop involving lots of symbols all the way until ACPI_VIDEO,
> >> which is the only video driver that explicitly selects 'THERMAL'. Turning
> >> this into a 'depends on' addresses the problem.
> >> For completeness, I'm also removing the redundant 'select THERMAL'
> >> from INTEL_MENLOW, so no other driver uses that statement.
> >>
> >> Fixes: bcdfb5e56dc5 ("drm/etnaviv: add etnaviv cooling device")
> >> Signed-off-by: Arnd Bergmann <[email protected]>
> >
> > This patch mixes a few things, so the subject doesn't really fit. I'm
> > fine with taking the patch trough my tree, if I can get an ACK on the
> > ACPI part.
>
> Actually the ACPI part triggered a new warning that I haven't figured
> out completely yet. Please disregard my patch for the moment.
>
> I think we can just drop the dependency in ACPI_VIDEO, but I'm not
> entirely sure yet if we could hit a broken configuration with THERMAL=m
> and ACPI_VIDEO=y in that case. Unfortunately we cannot use the
> same trick in ACPI_VIDEO that I used for ETNAVIV, because of
> another circular dependency in ACPI.
>
> Arnd