On Mon, Oct 30, 2017 at 12:56:36PM +0100, Aleksandar Markovic wrote:
> From: Miodrag Dinic <[email protected]>
>
> Provide amendments to the MIPS generic platform framework so that
> the new generic-based board Ranchu can be chosen to be built.
A bit more info about the board would be good here. What boot protocol
is used? Does QEMU generate the DT dynamically?
>
> Signed-off-by: Miodrag Dinic <[email protected]>
> Signed-off-by: Goran Ferenc <[email protected]>
> Signed-off-by: Aleksandar Markovic <[email protected]>
> ---
> MAINTAINERS | 6 ++
> arch/mips/configs/generic/board-ranchu.config | 30 ++++++++++
> arch/mips/generic/Kconfig | 10 ++++
> arch/mips/generic/Makefile | 1 +
> arch/mips/generic/board-ranchu.c | 79 +++++++++++++++++++++++++++
> 5 files changed, 126 insertions(+)
> create mode 100644 arch/mips/configs/generic/board-ranchu.config
> create mode 100644 arch/mips/generic/board-ranchu.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f1be016..e429cc2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11308,6 +11308,12 @@ S: Maintained
> F: Documentation/blockdev/ramdisk.txt
> F: drivers/block/brd.c
>
> +RANCHU VIRTUAL BOARD FOR MIPS
> +M: Miodrag Dinic <[email protected]>
> +L: [email protected]
> +S: Supported
> +F: arch/mips/generic/board-ranchu.c
Maybe worth adding arch/mips/configs/generic/board-ranchu.config too.
> +
> RANDOM NUMBER DRIVER
> M: "Theodore Ts'o" <[email protected]>
> S: Maintained
> diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
> index e0436aa..93582be 100644
> --- a/arch/mips/generic/Kconfig
> +++ b/arch/mips/generic/Kconfig
> @@ -42,4 +42,14 @@ config FIT_IMAGE_FDT_NI169445
> Enable this to include the FDT for the 169445 platform from
> National Instruments in the FIT kernel image.
>
> +config VIRT_BOARD_RANCHU
> + bool "Ranchu platform for Android emulator"
> + help
> + This enables support for the platform used by Android emulator.
> +
> + Ranchu platform consists of a set of virtual devices. This platform
> + enables emulation of variety of virtual configurations while using
> + Android emulator. Android emulator is based on Qemu, and contains
> + the support for the same set of virtual devices.
This is effectively in the section "FIT/UHI Boards", but it has a
platform file and no DT/FIT stuff in tree a bit like the boards in the
section "Legacy (non-UHI/non-FIT) Boards".
I'm guessing it might be something in between, with UHI + platform code,
but DT provided by QEMU (i.e. FIT support makes no sense)?
If it uses UHI I suppose it doesn't belong in the legacy section, but I
think a consistent prompt would be beneficial, e.g.
+config VIRT_BOARD_RANCHU
+ bool "Support Ranchu platform for Android emulator"
...
> diff --git a/arch/mips/generic/board-ranchu.c b/arch/mips/generic/board-ranchu.c
> new file mode 100644
> index 0000000..0397752
> --- /dev/null
> +++ b/arch/mips/generic/board-ranchu.c
> @@ -0,0 +1,79 @@
> +/*
> + * Support code for virtual Ranchu board for MIPS.
> + *
> + * Author: Miodrag Dinic <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/of_address.h>
> +
> +#include <asm/machine.h>
> +#include <asm/time.h>
> +
> +#define GOLDFISH_TIMER_LOW 0x00
> +#define GOLDFISH_TIMER_HIGH 0x04
> +
> +static __init uint64_t read_rtc_time(void __iomem *base)
> +{
> + u64 time_low;
> + u64 time_high;
> +
> + time_low = readl(base + GOLDFISH_TIMER_LOW);
> + time_high = readl(base + GOLDFISH_TIMER_HIGH);
> +
> + return (time_high << 32) | time_low;
What if high changes while reading this?
E.g.
TIMER_LOW 0x00000000 *0xffffffff*
TIMER_HIGH *0x00000001* 0x00000000
You'd presumably get 0x00000001ffffffff.
Perhaps it should read HIGH before too, and retry if it has changed.
Cheers
James
From 1582683942030413790@xxx Mon Oct 30 12:03:46 +0000 2017
X-GM-THRID: 1582683942030413790
X-Gmail-Labels: Inbox,Category Forums