2017-12-19 18:10:48

by Stefan Agner

Subject: [PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator

The Colibri default which enables USB Host power is not necessarily
tied to the OTG2 controller, some carrier board use the pin to
control USB power for both controllers. Hence name the pinctrl
group more generic.

Also move the regulator to the generic eval-v3 device tree since
the regulator is always on the carrier board. In the Colibri iMX7S
case the regulator is just not used. This allows to reuse the
regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 13 +------------
3 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 18bebd6d8d47..5ecb3a858c5a 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -70,6 +70,17 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
+ };
};

&bl {
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index bb5bf94f1a32..60ea7557d8c9 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -559,7 +559,7 @@
>;
};

- pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
+ pinctrl_usbh_reg: gpio-usbh-vbus {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
>;
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index a608a14d8c85..136e11ab4893 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -48,20 +48,9 @@
model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
"fsl,imx7d";
-
- reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg2_reg>;
- regulator-name = "VCC_USB[1-4]";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
- vin-supply = <&reg_5v0>;
- };
};

&usbotg2 {
- vbus-supply = <&reg_usb_otg2_vbus>;
+ vbus-supply = <&reg_usbh_vbus>;
status = "okay";
};
--
2.15.1

2017-12-19 18:10:50

by Stefan Agner

Subject: [PATCH v3 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active

The Colibri pins PWM<A> and <D> are multiplexed on the module, make
sure the secondary SoC pin is not active.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 60ea7557d8c9..dae6b561145b 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -507,6 +507,7 @@
pinctrl_pwm1: pwm1-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4
>;
};

@@ -525,6 +526,7 @@
pinctrl_pwm4: pwm4-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4
>;
};

--
2.15.1

2017-12-19 18:10:52

by Stefan Agner

Subject: [PATCH v3 3/9] ARM: dts: imx7-colibri: mux pull-ups where appropriate

Use pull-ups instead of pull-downs for the pins which are already
pulled-up externally.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index dae6b561145b..e4e32aa786f4 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -307,17 +307,17 @@

pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
- MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
- MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */
MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */
MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */
- MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */
- MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */
MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */
MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */
MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */
@@ -333,7 +333,7 @@
MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */
- MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */
MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */
MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */
@@ -357,7 +357,7 @@
pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
fsl,pins = <
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
- MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */
MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
@@ -378,8 +378,8 @@
MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */
MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */
MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */
- MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */
- MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */
+ MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */
>;
};

--
2.15.1

2017-12-19 18:11:17

by Stefan Agner

Subject: [PATCH v3 9/9] ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support

Add support for the Computer on Module Colibri iMX7D 1GB along
with the Colibri Evaluation Board device trees. Follow the usual
hierarchic include model, maintaining shared configuration in
imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
Changes since v2:
- Fix SPDX header location and use GPL-2.0 only license
Changes since v1:
- Use SPDX-License-Identifier: (GPL-2.0+ OR MIT)

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7-colibri.dtsi | 64 +++++++++++++++++++++++-
arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts | 19 +++++++
arch/arm/boot/dts/imx7d-colibri-emmc.dtsi | 21 ++++++++
arch/arm/boot/dts/imx7d-colibri.dtsi | 4 ++
5 files changed, 108 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5ba7ad6ae30..9e4b4ecae572 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -519,6 +519,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ull-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
imx7d-nitrogen7.dtb \
imx7d-pico.dtb \
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index c28a483b786d..895fbde4d433 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -121,7 +121,6 @@
fsl,use-minimum-ecc;
nand-on-flash-bbt;
nand-ecc-mode = "hw";
- status = "okay";
};

&i2c1 {
@@ -311,6 +310,21 @@
vqmmc-supply = <&reg_LDO2>;
};

+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ max-frequency = <100000000>;
+ vmmc-supply = <&reg_module_3v3>;
+ vqmmc-supply = <&reg_DCDC3>;
+ non-removable;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
@@ -598,6 +612,54 @@
>;
};

+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
+ >;
+ };
+
pinctrl_sai1: sai1-grp {
fsl,pins = <
MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000000..8ee73c870b12
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 Toradex AG
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7d-emmc-eval-v3",
+ "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usbh_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
new file mode 100644
index 000000000000..9b63b9c89e4b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 Toradex AG
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index 3c2cb502b388..6f2bb70c1fbd 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -49,6 +49,10 @@
};
};

+&gpmi {
+ status = "okay";
+};
+
&usbotg2 {
dr_mode = "host";
};
--
2.15.1

2017-12-19 18:11:29

by Stefan Agner

Subject: [PATCH v3 8/9] ARM: dts: imx7-colibri: add MCP2515 CAN controller

The Colibri Evaluation Carrier Board provides a MCP2515 CAN
controller connected via SPI. Note that the i.MX 7 provides
an internal CAN controller which is much better suited for CAN
operations. Using the MCP2515 with a Colibri iMX7 module is
mainly useful to test the SPI interface.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
Changes since v1:
- Changed label and node name for MCP2515
- Drop num-cs from ecspi3

arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 13 ++++++++++++-
2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 87c23b769a08..e2b99bb48250 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -45,6 +45,13 @@
stdout-path = "serial0:115200n8";
};

+ /* fixed crystal dedicated to mpc258x */
+ clk16m: clk16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
panel: panel {
compatible = "edt,et057090dhu";
backlight = <&bl>;
@@ -99,6 +106,24 @@
status = "okay";
};

+&ecspi3 {
+ status = "okay";
+
+ mcp2515: can@0 {
+ compatible = "microchip,mcp2515";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&reg_3v3>;
+ xceiver-supply = <&reg_5v0>;
+ status = "okay";
+ };
+};
+
&fec1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 689ff6822634..c28a483b786d 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -92,6 +92,12 @@
cpu-supply = <&reg_DCDC2>;
};

+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
@@ -313,7 +319,6 @@
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */
- MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
@@ -400,6 +405,12 @@
>;
};

+ pinctrl_can_int: can-int-grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
+ >;
+ };
+
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
--
2.15.1

2017-12-19 18:11:46

by Stefan Agner

Subject: [PATCH v3 7/9] ARM: dts: imx7-colibri: specify backlight GPIO

The Colibri standard defines SODIMM 71 as backlight enable
GPIO. Assign the GPIO to the backlight node in the module
level device tree.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index d623ef0f6e3e..689ff6822634 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -43,7 +43,10 @@
/ {
bl: backlight {
compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm1 0 5000000 0>;
+ enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};

reg_module_3v3: regulator-module-3v3 {
@@ -360,7 +363,6 @@
fsl,pins = <
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */
- MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */
@@ -436,6 +438,12 @@
>;
};

+ pinctrl_gpio_bl_on: gpio-bl-on {
+ fsl,pins = <
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
+ >;
+ };
+
pinctrl_gpmi_nand: gpmi-nand-grp {
fsl,pins = <
MX7D_PAD_SD3_CLK__NAND_CLE 0x71
--
2.15.1

2017-12-19 18:12:02

by Stefan Agner

Subject: [PATCH v3 6/9] ARM: dts: imx7-colibri: specify usdhc1 supplies

The usdhc1 controller instance is used to provide the default
SD/MMC capabilities of the Colibri standard. The IO pins are
supplied to the SoC on the module whereas the SD-card is powered
by the Carrier Board supply.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri.dtsi | 1 +
2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 5ecb3a858c5a..87c23b769a08 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -158,5 +158,6 @@
&usdhc1 {
keep-power-in-suspend;
wakeup-source;
+ vmmc-supply = <&reg_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 6498c1136ef1..d623ef0f6e3e 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -299,6 +299,7 @@
no-1-8-v;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
disable-wp;
+ vqmmc-supply = <&reg_LDO2>;
};

&iomuxc {
--
2.15.1

2017-12-19 18:12:22

by Stefan Agner

Subject: [PATCH v3 5/9] ARM: dts: imx7-colibri: specify cpu-supply

Specify CPU supply using the "cpu-supply" property instead of
the invalid "arm-supply" property.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f61041af026a..6498c1136ef1 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -86,7 +86,7 @@
};

&cpu0 {
- arm-supply = <&reg_DCDC2>;
+ cpu-supply = <&reg_DCDC2>;
};

&fec1 {
--
2.15.1

2017-12-19 18:12:38

by Stefan Agner

Subject: [PATCH v3 4/9] ARM: dts: imx7-colibri: use NAND_CE1 as GPIO

All Colibri iMX7 SKUs use either single-die NAND or eMMC, hence
NAND_CE1 is not used on the module and can be used as a GPIO by
carrier boards.

Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index e4e32aa786f4..f61041af026a 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -329,6 +329,7 @@
MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */
MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */
MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */
MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */
MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
@@ -439,7 +440,6 @@
MX7D_PAD_SD3_CLK__NAND_CLE 0x71
MX7D_PAD_SD3_CMD__NAND_ALE 0x71
MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71
- MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71
MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74
MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
--
2.15.1

2017-12-21 08:30:27

by Shawn Guo

Subject: Re: [PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator

On Tue, Dec 19, 2017 at 07:10:30PM +0100, Stefan Agner wrote:
> The Colibri default which enables USB Host power is not necessarily
> tied to the OTG2 controller, some carrier board use the pin to
> control USB power for both controllers. Hence name the pinctrl
> group more generic.
>
> Also move the regulator to the generic eval-v3 device tree since
> the regulator is always on the carrier board. In the Colibri iMX7S
> case the regulator is just not used. This allows to reuse the
> regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC.
>
> Signed-off-by: Stefan Agner <[email protected]>
> Reviewed-by: Fabio Estevam <[email protected]>

Applied all, thanks.