This series fixes some issues in rockchip iommu driver, and add of_iommu
support in it.
Changes in v5:
Use out labels to save the duplication between the error and success paths.
Use RK_MMU_POLL_PERIOD_US instead of 100.
Remove clk names.
Use clk_bulk APIs.
Avoid race about pm_runtime_get_if_in_use() and pm_runtime_enabled().
Changes in v4:
Rewrite commit message.
Changes in v3:
Also remove remove() and module_exit() as Tomasz suggested.
Loop platform_get_irq() as Robin suggested.
Add struct rk_iommudata.
Squash iommu/rockchip: Use iommu_group_get_for_dev() for add_device
Only call startup() and shutdown() when iommu attached.
Remove pm_mutex.
Check runtime PM disabled.
Check pm_runtime in rk_iommu_irq().
Remove rk_iommudata->domain.
Changes in v2:
Move irq request to probe(in patch[0])
Move bus_set_iommu() to rk_iommu_probe().
Jeffy Chen (9):
iommu/rockchip: Prohibit unbind and remove
iommu/rockchip: Fix error handling in probe
iommu/rockchip: Request irqs in rk_iommu_probe()
ARM: dts: rockchip: add clocks in vop iommu nodes
iommu/rockchip: Use IOMMU device for dma mapping operations
iommu/rockchip: Use OF_IOMMU to attach devices automatically
iommu/rockchip: Fix error handling in init
iommu/rockchip: Add runtime PM support
iommu/rockchip: Support sharing IOMMU between masters
Tomasz Figa (4):
iommu/rockchip: Fix error handling in attach
iommu/rockchip: Use iopoll helpers to wait for hardware
iommu/rockchip: Fix TLB flush of secondary IOMMUs
iommu/rockchip: Control clocks needed to access the IOMMU
.../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +
arch/arm/boot/dts/rk3036.dtsi | 1 +
arch/arm/boot/dts/rk3288.dtsi | 2 +
drivers/iommu/rockchip-iommu.c | 618 +++++++++++----------
4 files changed, 343 insertions(+), 286 deletions(-)
--
2.11.0
Add missing iommu_device_sysfs_remove in error path.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 16cd8780c289..c2ef3cbd4401 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -1193,8 +1193,12 @@ static int rk_iommu_probe(struct platform_device *pdev)
iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
err = iommu_device_register(&iommu->iommu);
+ if (err) {
+ iommu_device_sysfs_remove(&iommu->iommu);
+ return err;
+ }
- return err;
+ return 0;
}
static const struct of_device_id rk_iommu_dt_ids[] = {
--
2.11.0
From: Tomasz Figa <[email protected]>
This patch converts the rockchip-iommu driver to use the in-kernel
iopoll helpers to wait for certain status bits to change in registers
instead of an open-coded custom macro.
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5:
Use RK_MMU_POLL_PERIOD_US instead of 100.
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 75 ++++++++++++++++++++++--------------------
1 file changed, 39 insertions(+), 36 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index f7ff3a3645ea..baba283ccdf9 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -13,7 +13,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iommu.h>
-#include <linux/jiffies.h>
+#include <linux/iopoll.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +36,10 @@
#define RK_MMU_AUTO_GATING 0x24
#define DTE_ADDR_DUMMY 0xCAFEBABE
-#define FORCE_RESET_TIMEOUT 100 /* ms */
+
+#define RK_MMU_POLL_PERIOD_US 100
+#define RK_MMU_FORCE_RESET_TIMEOUT_US 100000
+#define RK_MMU_POLL_TIMEOUT_US 1000
/* RK_MMU_STATUS fields */
#define RK_MMU_STATUS_PAGING_ENABLED BIT(0)
@@ -73,8 +76,6 @@
*/
#define RK_IOMMU_PGSIZE_BITMAP 0x007ff000
-#define IOMMU_REG_POLL_COUNT_FAST 1000
-
struct rk_iommu_domain {
struct list_head iommus;
struct platform_device *pdev;
@@ -109,27 +110,6 @@ static struct rk_iommu_domain *to_rk_domain(struct iommu_domain *dom)
return container_of(dom, struct rk_iommu_domain, domain);
}
-/**
- * Inspired by _wait_for in intel_drv.h
- * This is NOT safe for use in interrupt context.
- *
- * Note that it's important that we check the condition again after having
- * timed out, since the timeout could be due to preemption or similar and
- * we've never had a chance to check the condition before the timeout.
- */
-#define rk_wait_for(COND, MS) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- ret__ = (COND) ? 0 : -ETIMEDOUT; \
- break; \
- } \
- usleep_range(50, 100); \
- } \
- ret__; \
-})
-
/*
* The Rockchip rk3288 iommu uses a 2-level page table.
* The first level is the "Directory Table" (DT).
@@ -333,9 +313,21 @@ static bool rk_iommu_is_paging_enabled(struct rk_iommu *iommu)
return enable;
}
+static bool rk_iommu_is_reset_done(struct rk_iommu *iommu)
+{
+ bool done = true;
+ int i;
+
+ for (i = 0; i < iommu->num_mmu; i++)
+ done &= rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0;
+
+ return done;
+}
+
static int rk_iommu_enable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_stall_active(iommu))
return 0;
@@ -346,7 +338,9 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_STALL);
- ret = rk_wait_for(rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable stall request timed out, status: %#08x\n",
@@ -358,13 +352,16 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
static int rk_iommu_disable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_stall_active(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_STALL);
- ret = rk_wait_for(!rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ !val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable stall request timed out, status: %#08x\n",
@@ -376,13 +373,16 @@ static int rk_iommu_disable_stall(struct rk_iommu *iommu)
static int rk_iommu_enable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_PAGING);
- ret = rk_wait_for(rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable paging request timed out, status: %#08x\n",
@@ -394,13 +394,16 @@ static int rk_iommu_enable_paging(struct rk_iommu *iommu)
static int rk_iommu_disable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_PAGING);
- ret = rk_wait_for(!rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ !val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable paging request timed out, status: %#08x\n",
@@ -413,6 +416,7 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
{
int ret, i;
u32 dte_addr;
+ bool val;
if (iommu->reset_disabled)
return 0;
@@ -433,13 +437,12 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_FORCE_RESET);
- for (i = 0; i < iommu->num_mmu; i++) {
- ret = rk_wait_for(rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0x00000000,
- FORCE_RESET_TIMEOUT);
- if (ret) {
- dev_err(iommu->dev, "FORCE_RESET command timed out\n");
- return ret;
- }
+ ret = readx_poll_timeout(rk_iommu_is_reset_done, iommu, val,
+ val, RK_MMU_FORCE_RESET_TIMEOUT_US,
+ RK_MMU_POLL_TIMEOUT_US);
+ if (ret) {
+ dev_err(iommu->dev, "FORCE_RESET command timed out\n");
+ return ret;
}
return 0;
--
2.11.0
Move request_irq to the end of rk_iommu_probe().
Suggested-by: Robin Murphy <[email protected]>
Signed-off-by: Jeffy Chen <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
Loop platform_get_irq() as Robin suggested.
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 38 +++++++++-----------------------------
1 file changed, 9 insertions(+), 29 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index c2ef3cbd4401..b743d82e6fe1 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -90,8 +90,6 @@ struct rk_iommu {
struct device *dev;
void __iomem **bases;
int num_mmu;
- int *irq;
- int num_irq;
bool reset_disabled;
struct iommu_device iommu;
struct list_head node; /* entry in rk_iommu_domain.iommus */
@@ -830,13 +828,6 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
iommu->domain = domain;
- for (i = 0; i < iommu->num_irq; i++) {
- ret = devm_request_irq(iommu->dev, iommu->irq[i], rk_iommu_irq,
- IRQF_SHARED, dev_name(dev), iommu);
- if (ret)
- return ret;
- }
-
for (i = 0; i < iommu->num_mmu; i++) {
rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR,
rk_domain->dt_dma);
@@ -885,9 +876,6 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
}
rk_iommu_disable_stall(iommu);
- for (i = 0; i < iommu->num_irq; i++)
- devm_free_irq(iommu->dev, iommu->irq[i], iommu);
-
iommu->domain = NULL;
dev_dbg(dev, "Detached from iommu domain\n");
@@ -1138,7 +1126,7 @@ static int rk_iommu_probe(struct platform_device *pdev)
struct rk_iommu *iommu;
struct resource *res;
int num_res = pdev->num_resources;
- int err, i;
+ int err, i, irq;
iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
if (!iommu)
@@ -1165,23 +1153,15 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (iommu->num_mmu == 0)
return PTR_ERR(iommu->bases[0]);
- iommu->num_irq = platform_irq_count(pdev);
- if (iommu->num_irq < 0)
- return iommu->num_irq;
- if (iommu->num_irq == 0)
- return -ENXIO;
+ i = 0;
+ while ((irq = platform_get_irq(pdev, i++)) != -ENXIO) {
+ if (irq < 0)
+ return irq;
- iommu->irq = devm_kcalloc(dev, iommu->num_irq, sizeof(*iommu->irq),
- GFP_KERNEL);
- if (!iommu->irq)
- return -ENOMEM;
-
- for (i = 0; i < iommu->num_irq; i++) {
- iommu->irq[i] = platform_get_irq(pdev, i);
- if (iommu->irq[i] < 0) {
- dev_err(dev, "Failed to get IRQ, %d\n", iommu->irq[i]);
- return -ENXIO;
- }
+ err = devm_request_irq(iommu->dev, irq, rk_iommu_irq,
+ IRQF_SHARED, dev_name(dev), iommu);
+ if (err)
+ return err;
}
iommu->reset_disabled = device_property_read_bool(dev,
--
2.11.0
From: Tomasz Figa <[email protected]>
Due to the bug in current code, only first IOMMU has the TLB lines
flushed in rk_iommu_zap_lines. This patch fixes the inner loop to
execute for all IOMMUs and properly flush the TLB.
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Jeffy Chen <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index baba283ccdf9..c4131ca792e0 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -274,19 +274,21 @@ static void rk_iommu_base_command(void __iomem *base, u32 command)
{
writel(command, base + RK_MMU_COMMAND);
}
-static void rk_iommu_zap_lines(struct rk_iommu *iommu, dma_addr_t iova,
+static void rk_iommu_zap_lines(struct rk_iommu *iommu, dma_addr_t iova_start,
size_t size)
{
int i;
-
- dma_addr_t iova_end = iova + size;
+ dma_addr_t iova_end = iova_start + size;
/*
* TODO(djkurtz): Figure out when it is more efficient to shootdown the
* entire iotlb rather than iterate over individual iovas.
*/
- for (i = 0; i < iommu->num_mmu; i++)
- for (; iova < iova_end; iova += SPAGE_SIZE)
+ for (i = 0; i < iommu->num_mmu; i++) {
+ dma_addr_t iova;
+
+ for (iova = iova_start; iova < iova_end; iova += SPAGE_SIZE)
rk_iommu_write(iommu->bases[i], RK_MMU_ZAP_ONE_LINE, iova);
+ }
}
static bool rk_iommu_is_stall_active(struct rk_iommu *iommu)
--
2.11.0
Add clocks in vop iommu nodes, since we are going to control clocks in
rockchip iommu driver.
Signed-off-by: Jeffy Chen <[email protected]>
---
Changes in v5:
Remove clk names.
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3036.dtsi | 1 +
arch/arm/boot/dts/rk3288.dtsi | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 3b704cfed69a..70fc72509fb2 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -197,6 +197,7 @@
reg = <0x10118300 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
#iommu-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6102e4e7f35c..e983ec13cd87 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1026,6 +1026,7 @@
reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
@@ -1074,6 +1075,7 @@
reg = <0x0 0xff940300 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
--
2.11.0
Converts the rockchip-iommu driver to use the OF_IOMMU infrastructure,
which allows attaching master devices to their IOMMUs automatically
according to DT properties.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
Add struct rk_iommudata.
Squash iommu/rockchip: Use iommu_group_get_for_dev() for add_device
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 135 ++++++++++++-----------------------------
1 file changed, 40 insertions(+), 95 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index e545b3f252a6..faebb6dd1f69 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -19,6 +19,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_iommu.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -99,6 +100,10 @@ struct rk_iommu {
struct iommu_domain *domain; /* domain to which iommu is attached */
};
+struct rk_iommudata {
+ struct rk_iommu *iommu;
+};
+
static struct device *dma_dev;
static inline void rk_table_flush(struct rk_iommu_domain *dom, dma_addr_t dma,
@@ -834,18 +839,9 @@ static size_t rk_iommu_unmap(struct iommu_domain *domain, unsigned long _iova,
static struct rk_iommu *rk_iommu_from_dev(struct device *dev)
{
- struct iommu_group *group;
- struct device *iommu_dev;
- struct rk_iommu *rk_iommu;
+ struct rk_iommudata *data = dev->archdata.iommu;
- group = iommu_group_get(dev);
- if (!group)
- return NULL;
- iommu_dev = iommu_group_get_iommudata(group);
- rk_iommu = dev_get_drvdata(iommu_dev);
- iommu_group_put(group);
-
- return rk_iommu;
+ return data ? data->iommu : NULL;
}
static int rk_iommu_attach_device(struct iommu_domain *domain,
@@ -1016,110 +1012,53 @@ static void rk_iommu_domain_free(struct iommu_domain *domain)
iommu_put_dma_cookie(&rk_domain->domain);
}
-static bool rk_iommu_is_dev_iommu_master(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- int ret;
-
- /*
- * An iommu master has an iommus property containing a list of phandles
- * to iommu nodes, each with an #iommu-cells property with value 0.
- */
- ret = of_count_phandle_with_args(np, "iommus", "#iommu-cells");
- return (ret > 0);
-}
-
-static int rk_iommu_group_set_iommudata(struct iommu_group *group,
- struct device *dev)
+static int rk_iommu_add_device(struct device *dev)
{
- struct device_node *np = dev->of_node;
- struct platform_device *pd;
- int ret;
- struct of_phandle_args args;
+ struct iommu_group *group;
+ struct rk_iommu *iommu;
- /*
- * An iommu master has an iommus property containing a list of phandles
- * to iommu nodes, each with an #iommu-cells property with value 0.
- */
- ret = of_parse_phandle_with_args(np, "iommus", "#iommu-cells", 0,
- &args);
- if (ret) {
- dev_err(dev, "of_parse_phandle_with_args(%pOF) => %d\n",
- np, ret);
- return ret;
- }
- if (args.args_count != 0) {
- dev_err(dev, "incorrect number of iommu params found for %pOF (found %d, expected 0)\n",
- args.np, args.args_count);
- return -EINVAL;
- }
+ iommu = rk_iommu_from_dev(dev);
+ if (!iommu)
+ return -ENODEV;
- pd = of_find_device_by_node(args.np);
- of_node_put(args.np);
- if (!pd) {
- dev_err(dev, "iommu %pOF not found\n", args.np);
- return -EPROBE_DEFER;
- }
+ group = iommu_group_get_for_dev(dev);
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+ iommu_group_put(group);
- /* TODO(djkurtz): handle multiple slave iommus for a single master */
- iommu_group_set_iommudata(group, &pd->dev, NULL);
+ iommu_device_link(&iommu->iommu, dev);
return 0;
}
-static int rk_iommu_add_device(struct device *dev)
+static void rk_iommu_remove_device(struct device *dev)
{
- struct iommu_group *group;
struct rk_iommu *iommu;
- int ret;
-
- if (!rk_iommu_is_dev_iommu_master(dev))
- return -ENODEV;
-
- group = iommu_group_get(dev);
- if (!group) {
- group = iommu_group_alloc();
- if (IS_ERR(group)) {
- dev_err(dev, "Failed to allocate IOMMU group\n");
- return PTR_ERR(group);
- }
- }
-
- ret = iommu_group_add_device(group, dev);
- if (ret)
- goto err_put_group;
-
- ret = rk_iommu_group_set_iommudata(group, dev);
- if (ret)
- goto err_remove_device;
iommu = rk_iommu_from_dev(dev);
- if (iommu)
- iommu_device_link(&iommu->iommu, dev);
- iommu_group_put(group);
-
- return 0;
-
-err_remove_device:
+ iommu_device_unlink(&iommu->iommu, dev);
iommu_group_remove_device(dev);
-err_put_group:
- iommu_group_put(group);
- return ret;
}
-static void rk_iommu_remove_device(struct device *dev)
+static int rk_iommu_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
{
- struct rk_iommu *iommu;
+ struct platform_device *iommu_dev;
+ struct rk_iommudata *data;
- if (!rk_iommu_is_dev_iommu_master(dev))
- return;
+ data = devm_kzalloc(dma_dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- iommu = rk_iommu_from_dev(dev);
- if (iommu)
- iommu_device_unlink(&iommu->iommu, dev);
+ iommu_dev = of_find_device_by_node(args->np);
- iommu_group_remove_device(dev);
+ data->iommu = platform_get_drvdata(iommu_dev);
+ dev->archdata.iommu = data;
+
+ of_dev_put(iommu_dev);
+
+ return 0;
}
static const struct iommu_ops rk_iommu_ops = {
@@ -1133,7 +1072,9 @@ static const struct iommu_ops rk_iommu_ops = {
.add_device = rk_iommu_add_device,
.remove_device = rk_iommu_remove_device,
.iova_to_phys = rk_iommu_iova_to_phys,
+ .device_group = generic_device_group,
.pgsize_bitmap = RK_IOMMU_PGSIZE_BITMAP,
+ .of_xlate = rk_iommu_of_xlate,
};
static int rk_iommu_probe(struct platform_device *pdev)
@@ -1196,6 +1137,8 @@ static int rk_iommu_probe(struct platform_device *pdev)
goto err_unprepare_clocks;
iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
+ iommu_device_set_fwnode(&iommu->iommu, &dev->of_node->fwnode);
+
err = iommu_device_register(&iommu->iommu);
if (err)
goto err_remove_sysfs;
@@ -1252,6 +1195,8 @@ static int __init rk_iommu_init(void)
}
subsys_initcall(rk_iommu_init);
+IOMMU_OF_DECLARE(rk_iommu_of, "rockchip,iommu");
+
MODULE_DESCRIPTION("IOMMU API for Rockchip");
MODULE_AUTHOR("Simon Xue <[email protected]> and Daniel Kurtz <[email protected]>");
MODULE_ALIAS("platform:rockchip-iommu");
--
2.11.0
It's hard to undo bus_set_iommu() in the error path, so move it to the
end of rk_iommu_probe().
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
Move bus_set_iommu() to rk_iommu_probe().
drivers/iommu/rockchip-iommu.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index faebb6dd1f69..9fea7d8206e9 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -1151,6 +1151,8 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (!dma_dev)
dma_dev = &pdev->dev;
+ bus_set_iommu(&platform_bus_type, &rk_iommu_ops);
+
return 0;
err_remove_sysfs:
iommu_device_sysfs_remove(&iommu->iommu);
@@ -1178,19 +1180,6 @@ static struct platform_driver rk_iommu_driver = {
static int __init rk_iommu_init(void)
{
- struct device_node *np;
- int ret;
-
- np = of_find_matching_node(NULL, rk_iommu_dt_ids);
- if (!np)
- return 0;
-
- of_node_put(np);
-
- ret = bus_set_iommu(&platform_bus_type, &rk_iommu_ops);
- if (ret)
- return ret;
-
return platform_driver_register(&rk_iommu_driver);
}
subsys_initcall(rk_iommu_init);
--
2.11.0
From: Tomasz Figa <[email protected]>
Currently if the driver encounters an error while attaching device, it
will leave the IOMMU in an inconsistent state. Even though it shouldn't
really happen in reality, let's just add proper error path to keep
things consistent.
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5:
Use out labels to save the duplication between the error and success paths.
Changes in v4: None
Changes in v3: None
Changes in v2:
Move irq request to probe(in patch[0])
drivers/iommu/rockchip-iommu.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index b743d82e6fe1..f7ff3a3645ea 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -824,7 +824,7 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
ret = rk_iommu_force_reset(iommu);
if (ret)
- return ret;
+ goto out_disable_stall;
iommu->domain = domain;
@@ -837,7 +837,7 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
ret = rk_iommu_enable_paging(iommu);
if (ret)
- return ret;
+ goto out_disable_stall;
spin_lock_irqsave(&rk_domain->iommus_lock, flags);
list_add_tail(&iommu->node, &rk_domain->iommus);
@@ -845,9 +845,9 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
dev_dbg(dev, "Attached to iommu domain\n");
+out_disable_stall:
rk_iommu_disable_stall(iommu);
-
- return 0;
+ return ret;
}
static void rk_iommu_detach_device(struct iommu_domain *domain,
--
2.11.0
There would be some masters sharing the same IOMMU device. Put them in
the same iommu group and share the same iommu domain.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
Remove rk_iommudata->domain.
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index f2a0f06d0a5f..eaa91108a4b0 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -99,6 +99,7 @@ struct rk_iommu {
struct iommu_device iommu;
struct list_head node; /* entry in rk_iommu_domain.iommus */
struct iommu_domain *domain; /* domain to which iommu is attached */
+ struct iommu_group *group;
};
struct rk_iommudata {
@@ -1110,6 +1111,15 @@ static void rk_iommu_remove_device(struct device *dev)
iommu_group_remove_device(dev);
}
+static struct iommu_group *rk_iommu_device_group(struct device *dev)
+{
+ struct rk_iommu *iommu;
+
+ iommu = rk_iommu_from_dev(dev);
+
+ return iommu->group;
+}
+
static int rk_iommu_of_xlate(struct device *dev,
struct of_phandle_args *args)
{
@@ -1141,7 +1151,7 @@ static const struct iommu_ops rk_iommu_ops = {
.add_device = rk_iommu_add_device,
.remove_device = rk_iommu_remove_device,
.iova_to_phys = rk_iommu_iova_to_phys,
- .device_group = generic_device_group,
+ .device_group = rk_iommu_device_group,
.pgsize_bitmap = RK_IOMMU_PGSIZE_BITMAP,
.of_xlate = rk_iommu_of_xlate,
};
@@ -1201,9 +1211,15 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (err)
goto err_put_clocks;
+ iommu->group = iommu_group_alloc();
+ if (IS_ERR(iommu->group)) {
+ err = PTR_ERR(iommu->group);
+ goto err_unprepare_clocks;
+ }
+
err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
if (err)
- goto err_unprepare_clocks;
+ goto err_put_group;
iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
iommu_device_set_fwnode(&iommu->iommu, &dev->of_node->fwnode);
@@ -1227,6 +1243,8 @@ static int rk_iommu_probe(struct platform_device *pdev)
return 0;
err_remove_sysfs:
iommu_device_sysfs_remove(&iommu->iommu);
+err_put_group:
+ iommu_group_put(iommu->group);
err_unprepare_clocks:
clk_bulk_unprepare(iommu->num_clocks, iommu->clocks);
err_put_clocks:
--
2.11.0
When the power domain is powered off, the IOMMU cannot be accessed and
register programming must be deferred until the power domain becomes
enabled.
Add runtime PM support, and use runtime PM device link from IOMMU to
master to startup and shutdown IOMMU.
Signed-off-by: Jeffy Chen <[email protected]>
---
Changes in v5:
Avoid race about pm_runtime_get_if_in_use() and pm_runtime_enabled().
Changes in v4: None
Changes in v3:
Only call startup() and shutdown() when iommu attached.
Remove pm_mutex.
Check runtime PM disabled.
Check pm_runtime in rk_iommu_irq().
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 181 +++++++++++++++++++++++++++++++----------
1 file changed, 140 insertions(+), 41 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 9fea7d8206e9..f2a0f06d0a5f 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -22,6 +22,7 @@
#include <linux/of_iommu.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -101,6 +102,7 @@ struct rk_iommu {
};
struct rk_iommudata {
+ struct device_link *link; /* runtime PM link from IOMMU to master */
struct rk_iommu *iommu;
};
@@ -545,7 +547,12 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
u32 int_status;
dma_addr_t iova;
irqreturn_t ret = IRQ_NONE;
- int i;
+ int i, err, need_runtime_put;
+
+ err = pm_runtime_get_if_in_use(iommu->dev);
+ if (err <= 0 && err != -EINVAL)
+ return ret;
+ need_runtime_put = err > 0;
WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
@@ -597,6 +604,9 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+ if (need_runtime_put)
+ pm_runtime_put(iommu->dev);
+
return ret;
}
@@ -638,10 +648,20 @@ static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
spin_lock_irqsave(&rk_domain->iommus_lock, flags);
list_for_each(pos, &rk_domain->iommus) {
struct rk_iommu *iommu;
+ int ret;
+
iommu = list_entry(pos, struct rk_iommu, node);
- WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
- rk_iommu_zap_lines(iommu, iova, size);
- clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+
+ /* Only zap TLBs of IOMMUs that are powered on. */
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ if (ret > 0 || ret == -EINVAL) {
+ WARN_ON(clk_bulk_enable(iommu->num_clocks,
+ iommu->clocks));
+ rk_iommu_zap_lines(iommu, iova, size);
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+ }
+ if (ret > 0)
+ pm_runtime_put(iommu->dev);
}
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
}
@@ -844,22 +864,30 @@ static struct rk_iommu *rk_iommu_from_dev(struct device *dev)
return data ? data->iommu : NULL;
}
-static int rk_iommu_attach_device(struct iommu_domain *domain,
- struct device *dev)
+/* Must be called with iommu powered on and attached */
+static void rk_iommu_shutdown(struct rk_iommu *iommu)
{
- struct rk_iommu *iommu;
+ int i;
+
+ /* Ignore error while disabling, just keep going */
+ WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
+ rk_iommu_enable_stall(iommu);
+ rk_iommu_disable_paging(iommu);
+ for (i = 0; i < iommu->num_mmu; i++) {
+ rk_iommu_write(iommu->bases[i], RK_MMU_INT_MASK, 0);
+ rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, 0);
+ }
+ rk_iommu_disable_stall(iommu);
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+}
+
+/* Must be called with iommu powered on and attached */
+static int rk_iommu_startup(struct rk_iommu *iommu)
+{
+ struct iommu_domain *domain = iommu->domain;
struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
- unsigned long flags;
int ret, i;
- /*
- * Allow 'virtual devices' (e.g., drm) to attach to domain.
- * Such a device does not belong to an iommu group.
- */
- iommu = rk_iommu_from_dev(dev);
- if (!iommu)
- return 0;
-
ret = clk_bulk_enable(iommu->num_clocks, iommu->clocks);
if (ret)
return ret;
@@ -872,8 +900,6 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
if (ret)
goto out_disable_stall;
- iommu->domain = domain;
-
for (i = 0; i < iommu->num_mmu; i++) {
rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR,
rk_domain->dt_dma);
@@ -882,14 +908,6 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
}
ret = rk_iommu_enable_paging(iommu);
- if (ret)
- goto out_disable_stall;
-
- spin_lock_irqsave(&rk_domain->iommus_lock, flags);
- list_add_tail(&iommu->node, &rk_domain->iommus);
- spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
-
- dev_dbg(dev, "Attached to iommu domain\n");
out_disable_stall:
rk_iommu_disable_stall(iommu);
@@ -904,31 +922,76 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
struct rk_iommu *iommu;
struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
unsigned long flags;
- int i;
+ int ret;
/* Allow 'virtual devices' (eg drm) to detach from domain */
iommu = rk_iommu_from_dev(dev);
if (!iommu)
return;
+ dev_dbg(dev, "Detaching from iommu domain\n");
+
+ /* iommu already detached */
+ if (iommu->domain != domain)
+ return;
+
+ iommu->domain = NULL;
+
spin_lock_irqsave(&rk_domain->iommus_lock, flags);
list_del_init(&iommu->node);
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
- /* Ignore error while disabling, just keep going */
- WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
- rk_iommu_enable_stall(iommu);
- rk_iommu_disable_paging(iommu);
- for (i = 0; i < iommu->num_mmu; i++) {
- rk_iommu_write(iommu->bases[i], RK_MMU_INT_MASK, 0);
- rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, 0);
- }
- rk_iommu_disable_stall(iommu);
- clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ if (ret > 0 || ret == -EINVAL)
+ rk_iommu_shutdown(iommu);
+ if (ret > 0)
+ pm_runtime_put(iommu->dev);
+}
- iommu->domain = NULL;
+static int rk_iommu_attach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct rk_iommu *iommu;
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ unsigned long flags;
+ int ret, need_runtime_put;
+
+ /*
+ * Allow 'virtual devices' (e.g., drm) to attach to domain.
+ * Such a device does not belong to an iommu group.
+ */
+ iommu = rk_iommu_from_dev(dev);
+ if (!iommu)
+ return 0;
+
+ dev_dbg(dev, "Attaching to iommu domain\n");
+
+ /* iommu already attached */
+ if (iommu->domain == domain)
+ return 0;
+
+ if (iommu->domain)
+ rk_iommu_detach_device(iommu->domain, dev);
+
+ iommu->domain = domain;
+
+ spin_lock_irqsave(&rk_domain->iommus_lock, flags);
+ list_add_tail(&iommu->node, &rk_domain->iommus);
+ spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
+
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ if (ret <= 0 && ret != -EINVAL)
+ return 0;
+ need_runtime_put = ret > 0;
+
+ ret = rk_iommu_startup(iommu);
+ if (ret)
+ rk_iommu_detach_device(iommu->domain, dev);
+
+ if (need_runtime_put)
+ pm_runtime_put(iommu->dev);
- dev_dbg(dev, "Detached from iommu domain\n");
+ return ret;
}
static struct iommu_domain *rk_iommu_domain_alloc(unsigned type)
@@ -1016,17 +1079,21 @@ static int rk_iommu_add_device(struct device *dev)
{
struct iommu_group *group;
struct rk_iommu *iommu;
+ struct rk_iommudata *data;
- iommu = rk_iommu_from_dev(dev);
- if (!iommu)
+ data = dev->archdata.iommu;
+ if (!data)
return -ENODEV;
+ iommu = rk_iommu_from_dev(dev);
+
group = iommu_group_get_for_dev(dev);
if (IS_ERR(group))
return PTR_ERR(group);
iommu_group_put(group);
iommu_device_link(&iommu->iommu, dev);
+ data->link = device_link_add(dev, iommu->dev, DL_FLAG_PM_RUNTIME);
return 0;
}
@@ -1034,9 +1101,11 @@ static int rk_iommu_add_device(struct device *dev)
static void rk_iommu_remove_device(struct device *dev)
{
struct rk_iommu *iommu;
+ struct rk_iommudata *data = dev->archdata.iommu;
iommu = rk_iommu_from_dev(dev);
+ device_link_del(data->link);
iommu_device_unlink(&iommu->iommu, dev);
iommu_group_remove_device(dev);
}
@@ -1153,6 +1222,8 @@ static int rk_iommu_probe(struct platform_device *pdev)
bus_set_iommu(&platform_bus_type, &rk_iommu_ops);
+ pm_runtime_enable(dev);
+
return 0;
err_remove_sysfs:
iommu_device_sysfs_remove(&iommu->iommu);
@@ -1163,6 +1234,33 @@ static int rk_iommu_probe(struct platform_device *pdev)
return err;
}
+static int __maybe_unused rk_iommu_suspend(struct device *dev)
+{
+ struct rk_iommu *iommu = dev_get_drvdata(dev);
+
+ if (!iommu->domain)
+ return 0;
+
+ rk_iommu_shutdown(iommu);
+ return 0;
+}
+
+static int __maybe_unused rk_iommu_resume(struct device *dev)
+{
+ struct rk_iommu *iommu = dev_get_drvdata(dev);
+
+ if (!iommu->domain)
+ return 0;
+
+ return rk_iommu_startup(iommu);
+}
+
+static const struct dev_pm_ops rk_iommu_pm_ops = {
+ SET_RUNTIME_PM_OPS(rk_iommu_suspend, rk_iommu_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
static const struct of_device_id rk_iommu_dt_ids[] = {
{ .compatible = "rockchip,iommu" },
{ /* sentinel */ }
@@ -1174,6 +1272,7 @@ static struct platform_driver rk_iommu_driver = {
.driver = {
.name = "rk_iommu",
.of_match_table = rk_iommu_dt_ids,
+ .pm = &rk_iommu_pm_ops,
.suppress_bind_attrs = true,
},
};
--
2.11.0
From: Tomasz Figa <[email protected]>
Current code relies on master driver enabling necessary clocks before
IOMMU is accessed, however there are cases when the IOMMU should be
accessed while the master is not running yet, for example allocating
V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
mapping API and doesn't engage the master driver at all.
This patch fixes the problem by letting clocks needed for IOMMU
operation to be listed in Device Tree and making the driver enable them
for the time of accessing the hardware.
Signed-off-by: Jeffy Chen <[email protected]>
Signed-off-by: Tomasz Figa <[email protected]>
---
Changes in v5:
Use clk_bulk APIs.
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +++
drivers/iommu/rockchip-iommu.c | 74 ++++++++++++++++++++--
2 files changed, 76 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
index 2098f7732264..33dd853359fa 100644
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
@@ -14,6 +14,13 @@ Required properties:
"single-master" device, and needs no additional information
to associate with its master device. See:
Documentation/devicetree/bindings/iommu/iommu.txt
+Optional properties:
+- clocks : A list of master clocks requires for the IOMMU to be accessible
+ by the host CPU. The number of clocks depends on the master
+ block and might as well be zero. See [1] for generic clock
+ bindings description.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional properties:
- rockchip,disable-mmu-reset : Don't use the mmu reset operation.
@@ -27,5 +34,6 @@ Example:
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
#iommu-cells = <0>;
};
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index c4131ca792e0..8a5e2a659b67 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -4,6 +4,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -91,6 +92,8 @@ struct rk_iommu {
struct device *dev;
void __iomem **bases;
int num_mmu;
+ struct clk_bulk_data *clocks;
+ int num_clocks;
bool reset_disabled;
struct iommu_device iommu;
struct list_head node; /* entry in rk_iommu_domain.iommus */
@@ -450,6 +453,38 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
return 0;
}
+static int rk_iommu_of_get_clocks(struct rk_iommu *iommu)
+{
+ struct device_node *np = iommu->dev->of_node;
+ int ret;
+ int i;
+
+ ret = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (ret == -ENOENT)
+ return 0;
+ else if (ret < 0)
+ return ret;
+
+ iommu->num_clocks = ret;
+ iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
+ sizeof(*iommu->clocks), GFP_KERNEL);
+ if (!iommu->clocks)
+ return -ENOMEM;
+
+ for (i = 0; i < iommu->num_clocks; ++i) {
+ iommu->clocks[i].clk = of_clk_get(np, i);
+ if (IS_ERR(iommu->clocks[i].clk)) {
+ ret = PTR_ERR(iommu->clocks[i].clk);
+ goto err_clk_put;
+ }
+ }
+
+ return 0;
+err_clk_put:
+ clk_bulk_put(i, iommu->clocks);
+ return ret;
+}
+
static void log_iova(struct rk_iommu *iommu, int index, dma_addr_t iova)
{
void __iomem *base = iommu->bases[index];
@@ -506,6 +541,8 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
irqreturn_t ret = IRQ_NONE;
int i;
+ WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
+
for (i = 0; i < iommu->num_mmu; i++) {
int_status = rk_iommu_read(iommu->bases[i], RK_MMU_INT_STATUS);
if (int_status == 0)
@@ -552,6 +589,8 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
rk_iommu_write(iommu->bases[i], RK_MMU_INT_CLEAR, int_status);
}
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+
return ret;
}
@@ -594,7 +633,9 @@ static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
list_for_each(pos, &rk_domain->iommus) {
struct rk_iommu *iommu;
iommu = list_entry(pos, struct rk_iommu, node);
+ WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
rk_iommu_zap_lines(iommu, iova, size);
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
}
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
}
@@ -823,10 +864,14 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
if (!iommu)
return 0;
- ret = rk_iommu_enable_stall(iommu);
+ ret = clk_bulk_enable(iommu->num_clocks, iommu->clocks);
if (ret)
return ret;
+ ret = rk_iommu_enable_stall(iommu);
+ if (ret)
+ goto out_disable_clocks;
+
ret = rk_iommu_force_reset(iommu);
if (ret)
goto out_disable_stall;
@@ -852,6 +897,8 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
out_disable_stall:
rk_iommu_disable_stall(iommu);
+out_disable_clocks:
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
return ret;
}
@@ -873,6 +920,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
/* Ignore error while disabling, just keep going */
+ WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
rk_iommu_enable_stall(iommu);
rk_iommu_disable_paging(iommu);
for (i = 0; i < iommu->num_mmu; i++) {
@@ -880,6 +928,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, 0);
}
rk_iommu_disable_stall(iommu);
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
iommu->domain = NULL;
@@ -1172,18 +1221,31 @@ static int rk_iommu_probe(struct platform_device *pdev)
iommu->reset_disabled = device_property_read_bool(dev,
"rockchip,disable-mmu-reset");
- err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
+ err = rk_iommu_of_get_clocks(iommu);
if (err)
return err;
+ err = clk_bulk_prepare(iommu->num_clocks, iommu->clocks);
+ if (err)
+ goto err_put_clocks;
+
+ err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
+ if (err)
+ goto err_unprepare_clocks;
+
iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
err = iommu_device_register(&iommu->iommu);
- if (err) {
- iommu_device_sysfs_remove(&iommu->iommu);
- return err;
- }
+ if (err)
+ goto err_remove_sysfs;
return 0;
+err_remove_sysfs:
+ iommu_device_sysfs_remove(&iommu->iommu);
+err_unprepare_clocks:
+ clk_bulk_unprepare(iommu->num_clocks, iommu->clocks);
+err_put_clocks:
+ clk_bulk_put(iommu->num_clocks, iommu->clocks);
+ return err;
}
static const struct of_device_id rk_iommu_dt_ids[] = {
--
2.11.0
Use the first registered IOMMU device for dma mapping operations, and
drop the domain platform device.
This is similar to exynos iommu driver.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 85 ++++++++++++------------------------------
1 file changed, 24 insertions(+), 61 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 8a5e2a659b67..e545b3f252a6 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -79,7 +79,6 @@
struct rk_iommu_domain {
struct list_head iommus;
- struct platform_device *pdev;
u32 *dt; /* page directory table */
dma_addr_t dt_dma;
spinlock_t iommus_lock; /* lock for iommus list */
@@ -100,12 +99,14 @@ struct rk_iommu {
struct iommu_domain *domain; /* domain to which iommu is attached */
};
+static struct device *dma_dev;
+
static inline void rk_table_flush(struct rk_iommu_domain *dom, dma_addr_t dma,
unsigned int count)
{
size_t size = count * sizeof(u32); /* count of u32 entry */
- dma_sync_single_for_device(&dom->pdev->dev, dma, size, DMA_TO_DEVICE);
+ dma_sync_single_for_device(dma_dev, dma, size, DMA_TO_DEVICE);
}
static struct rk_iommu_domain *to_rk_domain(struct iommu_domain *dom)
@@ -652,7 +653,6 @@ static void rk_iommu_zap_iova_first_last(struct rk_iommu_domain *rk_domain,
static u32 *rk_dte_get_page_table(struct rk_iommu_domain *rk_domain,
dma_addr_t iova)
{
- struct device *dev = &rk_domain->pdev->dev;
u32 *page_table, *dte_addr;
u32 dte_index, dte;
phys_addr_t pt_phys;
@@ -670,9 +670,9 @@ static u32 *rk_dte_get_page_table(struct rk_iommu_domain *rk_domain,
if (!page_table)
return ERR_PTR(-ENOMEM);
- pt_dma = dma_map_single(dev, page_table, SPAGE_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(dev, pt_dma)) {
- dev_err(dev, "DMA mapping error while allocating page table\n");
+ pt_dma = dma_map_single(dma_dev, page_table, SPAGE_SIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_dev, pt_dma)) {
+ dev_err(dma_dev, "DMA mapping error while allocating page table\n");
free_page((unsigned long)page_table);
return ERR_PTR(-ENOMEM);
}
@@ -938,29 +938,20 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
static struct iommu_domain *rk_iommu_domain_alloc(unsigned type)
{
struct rk_iommu_domain *rk_domain;
- struct platform_device *pdev;
- struct device *iommu_dev;
if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
return NULL;
- /* Register a pdev per domain, so DMA API can base on this *dev
- * even some virtual master doesn't have an iommu slave
- */
- pdev = platform_device_register_simple("rk_iommu_domain",
- PLATFORM_DEVID_AUTO, NULL, 0);
- if (IS_ERR(pdev))
+ if (!dma_dev)
return NULL;
- rk_domain = devm_kzalloc(&pdev->dev, sizeof(*rk_domain), GFP_KERNEL);
+ rk_domain = devm_kzalloc(dma_dev, sizeof(*rk_domain), GFP_KERNEL);
if (!rk_domain)
- goto err_unreg_pdev;
-
- rk_domain->pdev = pdev;
+ return NULL;
if (type == IOMMU_DOMAIN_DMA &&
iommu_get_dma_cookie(&rk_domain->domain))
- goto err_unreg_pdev;
+ return NULL;
/*
* rk32xx iommus use a 2 level pagetable.
@@ -971,11 +962,10 @@ static struct iommu_domain *rk_iommu_domain_alloc(unsigned type)
if (!rk_domain->dt)
goto err_put_cookie;
- iommu_dev = &pdev->dev;
- rk_domain->dt_dma = dma_map_single(iommu_dev, rk_domain->dt,
+ rk_domain->dt_dma = dma_map_single(dma_dev, rk_domain->dt,
SPAGE_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(iommu_dev, rk_domain->dt_dma)) {
- dev_err(iommu_dev, "DMA map error for DT\n");
+ if (dma_mapping_error(dma_dev, rk_domain->dt_dma)) {
+ dev_err(dma_dev, "DMA map error for DT\n");
goto err_free_dt;
}
@@ -996,8 +986,6 @@ static struct iommu_domain *rk_iommu_domain_alloc(unsigned type)
err_put_cookie:
if (type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&rk_domain->domain);
-err_unreg_pdev:
- platform_device_unregister(pdev);
return NULL;
}
@@ -1014,20 +1002,18 @@ static void rk_iommu_domain_free(struct iommu_domain *domain)
if (rk_dte_is_pt_valid(dte)) {
phys_addr_t pt_phys = rk_dte_pt_address(dte);
u32 *page_table = phys_to_virt(pt_phys);
- dma_unmap_single(&rk_domain->pdev->dev, pt_phys,
+ dma_unmap_single(dma_dev, pt_phys,
SPAGE_SIZE, DMA_TO_DEVICE);
free_page((unsigned long)page_table);
}
}
- dma_unmap_single(&rk_domain->pdev->dev, rk_domain->dt_dma,
+ dma_unmap_single(dma_dev, rk_domain->dt_dma,
SPAGE_SIZE, DMA_TO_DEVICE);
free_page((unsigned long)rk_domain->dt);
if (domain->type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&rk_domain->domain);
-
- platform_device_unregister(rk_domain->pdev);
}
static bool rk_iommu_is_dev_iommu_master(struct device *dev)
@@ -1150,30 +1136,6 @@ static const struct iommu_ops rk_iommu_ops = {
.pgsize_bitmap = RK_IOMMU_PGSIZE_BITMAP,
};
-static int rk_iommu_domain_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
-
- dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms), GFP_KERNEL);
- if (!dev->dma_parms)
- return -ENOMEM;
-
- /* Set dma_ops for dev, otherwise it would be dummy_dma_ops */
- arch_setup_dma_ops(dev, 0, DMA_BIT_MASK(32), NULL, false);
-
- dma_set_max_seg_size(dev, DMA_BIT_MASK(32));
- dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
-
- return 0;
-}
-
-static struct platform_driver rk_iommu_domain_driver = {
- .probe = rk_iommu_domain_probe,
- .driver = {
- .name = "rk_iommu_domain",
- },
-};
-
static int rk_iommu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1238,6 +1200,14 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (err)
goto err_remove_sysfs;
+ /*
+ * Use the first registered IOMMU device for domain to use with DMA
+ * API, since a domain might not physically correspond to a single
+ * IOMMU device..
+ */
+ if (!dma_dev)
+ dma_dev = &pdev->dev;
+
return 0;
err_remove_sysfs:
iommu_device_sysfs_remove(&iommu->iommu);
@@ -1278,14 +1248,7 @@ static int __init rk_iommu_init(void)
if (ret)
return ret;
- ret = platform_driver_register(&rk_iommu_domain_driver);
- if (ret)
- return ret;
-
- ret = platform_driver_register(&rk_iommu_driver);
- if (ret)
- platform_driver_unregister(&rk_iommu_domain_driver);
- return ret;
+ return platform_driver_register(&rk_iommu_driver);
}
subsys_initcall(rk_iommu_init);
--
2.11.0
Removal of IOMMUs cannot be done reliably.
This is similar to exynos iommu driver.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
---
Changes in v5: None
Changes in v4:
Rewrite commit message.
Changes in v3:
Also remove remove() and module_exit() as Tomasz suggested.
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 9d991c2d8767..16cd8780c289 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -1197,18 +1197,6 @@ static int rk_iommu_probe(struct platform_device *pdev)
return err;
}
-static int rk_iommu_remove(struct platform_device *pdev)
-{
- struct rk_iommu *iommu = platform_get_drvdata(pdev);
-
- if (iommu) {
- iommu_device_sysfs_remove(&iommu->iommu);
- iommu_device_unregister(&iommu->iommu);
- }
-
- return 0;
-}
-
static const struct of_device_id rk_iommu_dt_ids[] = {
{ .compatible = "rockchip,iommu" },
{ /* sentinel */ }
@@ -1217,10 +1205,10 @@ MODULE_DEVICE_TABLE(of, rk_iommu_dt_ids);
static struct platform_driver rk_iommu_driver = {
.probe = rk_iommu_probe,
- .remove = rk_iommu_remove,
.driver = {
.name = "rk_iommu",
.of_match_table = rk_iommu_dt_ids,
+ .suppress_bind_attrs = true,
},
};
@@ -1248,14 +1236,7 @@ static int __init rk_iommu_init(void)
platform_driver_unregister(&rk_iommu_domain_driver);
return ret;
}
-static void __exit rk_iommu_exit(void)
-{
- platform_driver_unregister(&rk_iommu_driver);
- platform_driver_unregister(&rk_iommu_domain_driver);
-}
-
subsys_initcall(rk_iommu_init);
-module_exit(rk_iommu_exit);
MODULE_DESCRIPTION("IOMMU API for Rockchip");
MODULE_AUTHOR("Simon Xue <[email protected]> and Daniel Kurtz <[email protected]>");
--
2.11.0
On 24/01/18 10:35, Jeffy Chen wrote:
> From: Tomasz Figa <[email protected]>
>
> Current code relies on master driver enabling necessary clocks before
> IOMMU is accessed, however there are cases when the IOMMU should be
> accessed while the master is not running yet, for example allocating
> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
> mapping API and doesn't engage the master driver at all.
>
> This patch fixes the problem by letting clocks needed for IOMMU
> operation to be listed in Device Tree and making the driver enable them
> for the time of accessing the hardware.
>
> Signed-off-by: Jeffy Chen <[email protected]>
> Signed-off-by: Tomasz Figa <[email protected]>
> ---
>
> Changes in v5:
> Use clk_bulk APIs.
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> .../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +++
> drivers/iommu/rockchip-iommu.c | 74 ++++++++++++++++++++--
> 2 files changed, 76 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> index 2098f7732264..33dd853359fa 100644
> --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> @@ -14,6 +14,13 @@ Required properties:
> "single-master" device, and needs no additional information
> to associate with its master device. See:
> Documentation/devicetree/bindings/iommu/iommu.txt
> +Optional properties:
> +- clocks : A list of master clocks requires for the IOMMU to be accessible
s/requires/required/
> + by the host CPU. The number of clocks depends on the master
> + block and might as well be zero. See [1] for generic clock
Oops, some subtleties of English here :)
To say "the number of clocks ... might as well be zero" effectively
implies "there's no point ever specifying any clocks". I guess what you
really mean here is "...might well be...", i.e. it is both valid and
reasonably likely to require zero clocks.
> + bindings description.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>
> Optional properties:
> - rockchip,disable-mmu-reset : Don't use the mmu reset operation.
> @@ -27,5 +34,6 @@ Example:
> reg = <0xff940300 0x100>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "vopl_mmu";
> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> #iommu-cells = <0>;
> };
> diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
> index c4131ca792e0..8a5e2a659b67 100644
> --- a/drivers/iommu/rockchip-iommu.c
> +++ b/drivers/iommu/rockchip-iommu.c
> @@ -4,6 +4,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <linux/clk.h>
> #include <linux/compiler.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> @@ -91,6 +92,8 @@ struct rk_iommu {
> struct device *dev;
> void __iomem **bases;
> int num_mmu;
> + struct clk_bulk_data *clocks;
> + int num_clocks;
> bool reset_disabled;
> struct iommu_device iommu;
> struct list_head node; /* entry in rk_iommu_domain.iommus */
> @@ -450,6 +453,38 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
> return 0;
> }
>
> +static int rk_iommu_of_get_clocks(struct rk_iommu *iommu)
> +{
> + struct device_node *np = iommu->dev->of_node;
> + int ret;
> + int i;
> +
> + ret = of_count_phandle_with_args(np, "clocks", "#clock-cells");
> + if (ret == -ENOENT)
> + return 0;
> + else if (ret < 0)
> + return ret;
> +
> + iommu->num_clocks = ret;
> + iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
> + sizeof(*iommu->clocks), GFP_KERNEL);
> + if (!iommu->clocks)
> + return -ENOMEM;
> +
> + for (i = 0; i < iommu->num_clocks; ++i) {
> + iommu->clocks[i].clk = of_clk_get(np, i);
> + if (IS_ERR(iommu->clocks[i].clk)) {
> + ret = PTR_ERR(iommu->clocks[i].clk);
> + goto err_clk_put;
> + }
> + }
Just to confirm my understanding from a quick scan through the code, the
reason we can't use clk_bulk_get() here is that currently, clocks[i].id
being NULL means we'd end up just getting the first clock multiple
times, right?
I guess there could be other users who also want "just get whatever
clocks I have" functionality, so it might be worth proposing that for
the core API as a separate/follow-up patch, but it definitely doesn't
need to be part of this series.
I really don't know enough about correct clk API usage, but modulo the
binding comments it certainly looks nice and tidy now;
Acked-by: Robin Murphy <[email protected]>
Thanks,
Robin.
> +
> + return 0;
> +err_clk_put:
> + clk_bulk_put(i, iommu->clocks);
> + return ret;
> +}
> +
> static void log_iova(struct rk_iommu *iommu, int index, dma_addr_t iova)
> {
> void __iomem *base = iommu->bases[index];
> @@ -506,6 +541,8 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
> irqreturn_t ret = IRQ_NONE;
> int i;
>
> + WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
> +
> for (i = 0; i < iommu->num_mmu; i++) {
> int_status = rk_iommu_read(iommu->bases[i], RK_MMU_INT_STATUS);
> if (int_status == 0)
> @@ -552,6 +589,8 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
> rk_iommu_write(iommu->bases[i], RK_MMU_INT_CLEAR, int_status);
> }
>
> + clk_bulk_disable(iommu->num_clocks, iommu->clocks);
> +
> return ret;
> }
>
> @@ -594,7 +633,9 @@ static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
> list_for_each(pos, &rk_domain->iommus) {
> struct rk_iommu *iommu;
> iommu = list_entry(pos, struct rk_iommu, node);
> + WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
> rk_iommu_zap_lines(iommu, iova, size);
> + clk_bulk_disable(iommu->num_clocks, iommu->clocks);
> }
> spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
> }
> @@ -823,10 +864,14 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
> if (!iommu)
> return 0;
>
> - ret = rk_iommu_enable_stall(iommu);
> + ret = clk_bulk_enable(iommu->num_clocks, iommu->clocks);
> if (ret)
> return ret;
>
> + ret = rk_iommu_enable_stall(iommu);
> + if (ret)
> + goto out_disable_clocks;
> +
> ret = rk_iommu_force_reset(iommu);
> if (ret)
> goto out_disable_stall;
> @@ -852,6 +897,8 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
>
> out_disable_stall:
> rk_iommu_disable_stall(iommu);
> +out_disable_clocks:
> + clk_bulk_disable(iommu->num_clocks, iommu->clocks);
> return ret;
> }
>
> @@ -873,6 +920,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
> spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
>
> /* Ignore error while disabling, just keep going */
> + WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
> rk_iommu_enable_stall(iommu);
> rk_iommu_disable_paging(iommu);
> for (i = 0; i < iommu->num_mmu; i++) {
> @@ -880,6 +928,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
> rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, 0);
> }
> rk_iommu_disable_stall(iommu);
> + clk_bulk_disable(iommu->num_clocks, iommu->clocks);
>
> iommu->domain = NULL;
>
> @@ -1172,18 +1221,31 @@ static int rk_iommu_probe(struct platform_device *pdev)
> iommu->reset_disabled = device_property_read_bool(dev,
> "rockchip,disable-mmu-reset");
>
> - err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
> + err = rk_iommu_of_get_clocks(iommu);
> if (err)
> return err;
>
> + err = clk_bulk_prepare(iommu->num_clocks, iommu->clocks);
> + if (err)
> + goto err_put_clocks;
> +
> + err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
> + if (err)
> + goto err_unprepare_clocks;
> +
> iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
> err = iommu_device_register(&iommu->iommu);
> - if (err) {
> - iommu_device_sysfs_remove(&iommu->iommu);
> - return err;
> - }
> + if (err)
> + goto err_remove_sysfs;
>
> return 0;
> +err_remove_sysfs:
> + iommu_device_sysfs_remove(&iommu->iommu);
> +err_unprepare_clocks:
> + clk_bulk_unprepare(iommu->num_clocks, iommu->clocks);
> +err_put_clocks:
> + clk_bulk_put(iommu->num_clocks, iommu->clocks);
> + return err;
> }
>
> static const struct of_device_id rk_iommu_dt_ids[] = {
>
Hi Robin,
Thanks for your reply.
On 01/24/2018 09:49 PM, Robin Murphy wrote:
>>
>> +Optional properties:
>> +- clocks : A list of master clocks requires for the IOMMU to be
>> accessible
>
> s/requires/required/
ok
>
>> + by the host CPU. The number of clocks depends on the master
>> + block and might as well be zero. See [1] for generic clock
>
> Oops, some subtleties of English here :)
>
> To say "the number of clocks ... might as well be zero" effectively
> implies "there's no point ever specifying any clocks". I guess what you
> really mean here is "...might well be...", i.e. it is both valid and
> reasonably likely to require zero clocks.
ok
>
>> + bindings description.
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> Optional properties:
>> - rockchip,disable-mmu-reset : Don't use the mmu reset operation.
>> @@ -27,5 +34,6 @@ Example:
>> reg = <0xff940300 0x100>;
>> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> interrupt-names = "vopl_mmu";
>> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
>> #iommu-cells = <0>;
>> };
>> diff --git a/drivers/iommu/rockchip-iommu.c
>> b/drivers/iommu/rockchip-iommu.c
>> index c4131ca792e0..8a5e2a659b67 100644
>> --- a/drivers/iommu/rockchip-iommu.c
>> +++ b/drivers/iommu/rockchip-iommu.c
>> @@ -4,6 +4,7 @@
>> * published by the Free Software Foundation.
>> */
>> +#include <linux/clk.h>
>> #include <linux/compiler.h>
>> #include <linux/delay.h>
>> #include <linux/device.h>
>> @@ -91,6 +92,8 @@ struct rk_iommu {
>> struct device *dev;
>> void __iomem **bases;
>> int num_mmu;
>> + struct clk_bulk_data *clocks;
>> + int num_clocks;
>> bool reset_disabled;
>> struct iommu_device iommu;
>> struct list_head node; /* entry in rk_iommu_domain.iommus */
>> @@ -450,6 +453,38 @@ static int rk_iommu_force_reset(struct rk_iommu
>> *iommu)
>> return 0;
>> }
>> +static int rk_iommu_of_get_clocks(struct rk_iommu *iommu)
>> +{
>> + struct device_node *np = iommu->dev->of_node;
>> + int ret;
>> + int i;
>> +
>> + ret = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> + if (ret == -ENOENT)
>> + return 0;
>> + else if (ret < 0)
>> + return ret;
>> +
>> + iommu->num_clocks = ret;
>> + iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
>> + sizeof(*iommu->clocks), GFP_KERNEL);
>> + if (!iommu->clocks)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < iommu->num_clocks; ++i) {
>> + iommu->clocks[i].clk = of_clk_get(np, i);
>> + if (IS_ERR(iommu->clocks[i].clk)) {
>> + ret = PTR_ERR(iommu->clocks[i].clk);
>> + goto err_clk_put;
>> + }
>> + }
>
> Just to confirm my understanding from a quick scan through the code, the
> reason we can't use clk_bulk_get() here is that currently, clocks[i].id
> being NULL means we'd end up just getting the first clock multiple
> times, right?
right, without a valid name, it would return the first clock.
/* Walk up the tree of devices looking for a clock that matches */
while (np) {
int index = 0;
/*
* For named clocks, first look up the name in the
* "clock-names" property. If it cannot be found, then
* index will be an error code, and of_clk_get() will fail.
*/
if (name)
index = of_property_match_string(np, "clock-names", name);
clk = __of_clk_get(np, index, dev_id, name);
>
> I guess there could be other users who also want "just get whatever
> clocks I have" functionality, so it might be worth proposing that for
> the core API as a separate/follow-up patch, but it definitely doesn't
> need to be part of this series.
right, i can try to do it later :)
>
> I really don't know enough about correct clk API usage, but modulo the
> binding comments it certainly looks nice and tidy now;
>
> Acked-by: Robin Murphy <[email protected]>
thanks.
>
> Thanks,
> Robin.
On Wed, Jan 24, 2018 at 06:35:11PM +0800, Jeffy Chen wrote:
> From: Tomasz Figa <[email protected]>
>
> Current code relies on master driver enabling necessary clocks before
> IOMMU is accessed, however there are cases when the IOMMU should be
> accessed while the master is not running yet, for example allocating
> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
> mapping API and doesn't engage the master driver at all.
>
> This patch fixes the problem by letting clocks needed for IOMMU
> operation to be listed in Device Tree and making the driver enable them
> for the time of accessing the hardware.
>
> Signed-off-by: Jeffy Chen <[email protected]>
> Signed-off-by: Tomasz Figa <[email protected]>
> ---
>
> Changes in v5:
> Use clk_bulk APIs.
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> .../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +++
Please split binding patches to a separate patch.
> drivers/iommu/rockchip-iommu.c | 74 ++++++++++++++++++++--
> 2 files changed, 76 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> index 2098f7732264..33dd853359fa 100644
> --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> @@ -14,6 +14,13 @@ Required properties:
> "single-master" device, and needs no additional information
> to associate with its master device. See:
> Documentation/devicetree/bindings/iommu/iommu.txt
> +Optional properties:
> +- clocks : A list of master clocks requires for the IOMMU to be accessible
> + by the host CPU. The number of clocks depends on the master
> + block and might as well be zero. See [1] for generic clock
> + bindings description.
Hardware blocks don't have a variable number of clock connections. This
needs to be a defined number of clocks (per compatible string if there
are different implementations with different # of clocks).
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>
> Optional properties:
> - rockchip,disable-mmu-reset : Don't use the mmu reset operation.
> @@ -27,5 +34,6 @@ Example:
> reg = <0xff940300 0x100>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "vopl_mmu";
> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> #iommu-cells = <0>;
> };
Hi Rob,
On Wed, Jan 31, 2018 at 2:05 AM, Rob Herring <[email protected]> wrote:
> On Wed, Jan 24, 2018 at 06:35:11PM +0800, Jeffy Chen wrote:
>> From: Tomasz Figa <[email protected]>
>>
>> Current code relies on master driver enabling necessary clocks before
>> IOMMU is accessed, however there are cases when the IOMMU should be
>> accessed while the master is not running yet, for example allocating
>> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
>> mapping API and doesn't engage the master driver at all.
>>
>> This patch fixes the problem by letting clocks needed for IOMMU
>> operation to be listed in Device Tree and making the driver enable them
>> for the time of accessing the hardware.
>>
>> Signed-off-by: Jeffy Chen <[email protected]>
>> Signed-off-by: Tomasz Figa <[email protected]>
>> ---
>>
>> Changes in v5:
>> Use clk_bulk APIs.
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
>>
>> .../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +++
>
> Please split binding patches to a separate patch.
>
>> drivers/iommu/rockchip-iommu.c | 74 ++++++++++++++++++++--
>> 2 files changed, 76 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>> index 2098f7732264..33dd853359fa 100644
>> --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>> @@ -14,6 +14,13 @@ Required properties:
>> "single-master" device, and needs no additional information
>> to associate with its master device. See:
>> Documentation/devicetree/bindings/iommu/iommu.txt
>> +Optional properties:
>> +- clocks : A list of master clocks requires for the IOMMU to be accessible
>> + by the host CPU. The number of clocks depends on the master
>> + block and might as well be zero. See [1] for generic clock
>> + bindings description.
>
> Hardware blocks don't have a variable number of clock connections.
I think you underestimate the imagination of hardware designers. :)
For Rockchip IOMMU, there is a set of clocks, which all need to be
enabled for IOMMU register access to succeed. The clocks are not
directly fed to the IOMMU, but they are needed for the various buses
and intermediate blocks on the way to the IOMMU to work.
And the set varies based on next to which master block the IOMMU block
is located, because the hierarchy of buses and intermediate blocks is
different.
Best regards,
Tomasz
On Wed, Jan 31, 2018 at 1:52 AM, Tomasz Figa <[email protected]> wrote:
> Hi Rob,
>
> On Wed, Jan 31, 2018 at 2:05 AM, Rob Herring <[email protected]> wrote:
>> On Wed, Jan 24, 2018 at 06:35:11PM +0800, Jeffy Chen wrote:
>>> From: Tomasz Figa <[email protected]>
>>>
>>> Current code relies on master driver enabling necessary clocks before
>>> IOMMU is accessed, however there are cases when the IOMMU should be
>>> accessed while the master is not running yet, for example allocating
>>> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
>>> mapping API and doesn't engage the master driver at all.
>>>
>>> This patch fixes the problem by letting clocks needed for IOMMU
>>> operation to be listed in Device Tree and making the driver enable them
>>> for the time of accessing the hardware.
>>>
>>> Signed-off-by: Jeffy Chen <[email protected]>
>>> Signed-off-by: Tomasz Figa <[email protected]>
>>> ---
>>>
>>> Changes in v5:
>>> Use clk_bulk APIs.
>>>
>>> Changes in v4: None
>>> Changes in v3: None
>>> Changes in v2: None
>>>
>>> .../devicetree/bindings/iommu/rockchip,iommu.txt | 8 +++
>>
>> Please split binding patches to a separate patch.
>>
>>> drivers/iommu/rockchip-iommu.c | 74 ++++++++++++++++++++--
>>> 2 files changed, 76 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>> index 2098f7732264..33dd853359fa 100644
>>> --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>> @@ -14,6 +14,13 @@ Required properties:
>>> "single-master" device, and needs no additional information
>>> to associate with its master device. See:
>>> Documentation/devicetree/bindings/iommu/iommu.txt
>>> +Optional properties:
>>> +- clocks : A list of master clocks requires for the IOMMU to be accessible
>>> + by the host CPU. The number of clocks depends on the master
>>> + block and might as well be zero. See [1] for generic clock
>>> + bindings description.
>>
>> Hardware blocks don't have a variable number of clock connections.
>
> I think you underestimate the imagination of hardware designers. :)
Learned long ago to never do that. If there are 2 ways to do
something, they will find a 3rd way.
> For Rockchip IOMMU, there is a set of clocks, which all need to be
> enabled for IOMMU register access to succeed. The clocks are not
> directly fed to the IOMMU, but they are needed for the various buses
> and intermediate blocks on the way to the IOMMU to work.
The binding should describe the clock connections, not what clocks a
driver needs (currently). It sounds like a lack of managing bus clocks
to me.
In any case, the binding must be written so it can be verified. If you
can have any number of clocks with any names, there's no point in
documenting.
Rob
On 1/24/2018 7:19 PM, Robin Murphy wrote:
> On 24/01/18 10:35, Jeffy Chen wrote:
>> From: Tomasz Figa <[email protected]>
>>
>> Current code relies on master driver enabling necessary clocks before
>> IOMMU is accessed, however there are cases when the IOMMU should be
>> accessed while the master is not running yet, for example allocating
>> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
>> mapping API and doesn't engage the master driver at all.
>>
>> This patch fixes the problem by letting clocks needed for IOMMU
>> operation to be listed in Device Tree and making the driver enable them
>> for the time of accessing the hardware.
>>
>> Signed-off-by: Jeffy Chen <[email protected]>
>> Signed-off-by: Tomasz Figa <[email protected]>
>> ---
>>
>> Changes in v5:
>> Use clk_bulk APIs.
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
[snip]
>> +static int rk_iommu_of_get_clocks(struct rk_iommu *iommu)
>> +{
>> + struct device_node *np = iommu->dev->of_node;
>> + int ret;
>> + int i;
>> +
>> + ret = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> + if (ret == -ENOENT)
>> + return 0;
>> + else if (ret < 0)
>> + return ret;
>> +
>> + iommu->num_clocks = ret;
>> + iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
>> + sizeof(*iommu->clocks), GFP_KERNEL);
>> + if (!iommu->clocks)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < iommu->num_clocks; ++i) {
>> + iommu->clocks[i].clk = of_clk_get(np, i);
>> + if (IS_ERR(iommu->clocks[i].clk)) {
>> + ret = PTR_ERR(iommu->clocks[i].clk);
>> + goto err_clk_put;
>> + }
>> + }
>
> Just to confirm my understanding from a quick scan through the code,
> the reason we can't use clk_bulk_get() here is that currently,
> clocks[i].id being NULL means we'd end up just getting the first clock
> multiple times, right?
>
> I guess there could be other users who also want "just get whatever
> clocks I have" functionality, so it might be worth proposing that for
> the core API as a separate/follow-up patch, but it definitely doesn't
> need to be part of this series.
Just to understand. Is it okay to make the driver "just get whatever
clocks device node gives"?
Doesn't the driver need to be aware of which all clocks are supposed to
be obtained and enabled
It's should good for debug to let the world know which clock we failed
to get.
regards
Vivek
>
> I really don't know enough about correct clk API usage, but modulo the
> binding comments it certainly looks nice and tidy now;
>
> Acked-by: Robin Murphy <[email protected]>
>
> Thanks,
> Robin.
[snip]
> _______________________________________________
> iommu mailing list
> [email protected]
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
On Wed, Feb 14, 2018 at 7:03 PM, Vivek Gautam
<[email protected]> wrote:
>
>
> On 1/24/2018 7:19 PM, Robin Murphy wrote:
>>
>> On 24/01/18 10:35, Jeffy Chen wrote:
>>>
>>> From: Tomasz Figa <[email protected]>
>>>
>>> Current code relies on master driver enabling necessary clocks before
>>> IOMMU is accessed, however there are cases when the IOMMU should be
>>> accessed while the master is not running yet, for example allocating
>>> V4L2 videobuf2 buffers, which is done by the VB2 framework using DMA
>>> mapping API and doesn't engage the master driver at all.
>>>
>>> This patch fixes the problem by letting clocks needed for IOMMU
>>> operation to be listed in Device Tree and making the driver enable them
>>> for the time of accessing the hardware.
>>>
>>> Signed-off-by: Jeffy Chen <[email protected]>
>>> Signed-off-by: Tomasz Figa <[email protected]>
>>> ---
>>>
>>> Changes in v5:
>>> Use clk_bulk APIs.
>>>
>>> Changes in v4: None
>>> Changes in v3: None
>>> Changes in v2: None
>
>
> [snip]
>
>
>>> +static int rk_iommu_of_get_clocks(struct rk_iommu *iommu)
>>> +{
>>> + struct device_node *np = iommu->dev->of_node;
>>> + int ret;
>>> + int i;
>>> +
>>> + ret = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>>> + if (ret == -ENOENT)
>>> + return 0;
>>> + else if (ret < 0)
>>> + return ret;
>>> +
>>> + iommu->num_clocks = ret;
>>> + iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
>>> + sizeof(*iommu->clocks), GFP_KERNEL);
>>> + if (!iommu->clocks)
>>> + return -ENOMEM;
>>> +
>>> + for (i = 0; i < iommu->num_clocks; ++i) {
>>> + iommu->clocks[i].clk = of_clk_get(np, i);
>>> + if (IS_ERR(iommu->clocks[i].clk)) {
>>> + ret = PTR_ERR(iommu->clocks[i].clk);
>>> + goto err_clk_put;
>>> + }
>>> + }
>>
>>
>> Just to confirm my understanding from a quick scan through the code, the
>> reason we can't use clk_bulk_get() here is that currently, clocks[i].id
>> being NULL means we'd end up just getting the first clock multiple times,
>> right?
>>
>> I guess there could be other users who also want "just get whatever clocks
>> I have" functionality, so it might be worth proposing that for the core API
>> as a separate/follow-up patch, but it definitely doesn't need to be part of
>> this series.
>
>
> Just to understand. Is it okay to make the driver "just get whatever clocks
> device node gives"?
> Doesn't the driver need to be aware of which all clocks are supposed to be
> obtained and enabled
> It's should good for debug to let the world know which clock we failed to
> get.
Yeah, in general that's desired. However, it is at least impractical
to specify all the clocks in Rockchip case, because it's different for
each block and depends on the master next to which it is located.
Best regards,
Tomasz
On 23/02/18 10:24, JeffyChen wrote:
> Hi guys,
>
> On 02/01/2018 07:19 PM, JeffyChen wrote:
>>>>>>
>>>>>>
>>>>>> diff --git
>>>>>> a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>>>>> b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>>>>> index 2098f7732264..33dd853359fa 100644
>>>>>> --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>>>>> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
>>>>>> @@ -14,6 +14,13 @@ Required properties:
>>>>>> "single-master" device, and needs no
>>>>>> additional information
>>>>>> to associate with its master device. See:
>>>>>>
>>>>>> Documentation/devicetree/bindings/iommu/iommu.txt
>>>>>> +Optional properties:
>>>>>> +- clocks : A list of master clocks requires for the IOMMU to be
>>>>>> accessible
>>>>>> + by the host CPU. The number of clocks depends on the
>>>>>> master
>>>>>> + block and might as well be zero. See [1] for generic
>>>>>> clock
>>>>>> + bindings description.
>>>>>
>>>>> Hardware blocks don't have a variable number of clock connections.
>>>>
>>>> I think you underestimate the imagination of hardware designers. :)
>>>
>>> Learned long ago to never do that. If there are 2 ways to do
>>> something, they will find a 3rd way.
>>>
>>>> For Rockchip IOMMU, there is a set of clocks, which all need to be
>>>> enabled for IOMMU register access to succeed. The clocks are not
>>>> directly fed to the IOMMU, but they are needed for the various buses
>>>> and intermediate blocks on the way to the IOMMU to work.
>>>
>>> The binding should describe the clock connections, not what clocks a
>>> driver needs (currently). It sounds like a lack of managing bus clocks
>>> to me.
>>>
>>> In any case, the binding must be written so it can be verified. If you
>>> can have any number of clocks with any names, there's no point in
>>> documenting.
>>
>> the rockchip IOMMU is part of the master block in hardware, so it needs
>> to control the master's power domain and some of the master's clocks
>> when access it's registers.
>>
>> and the number of clocks needed here, might be different between each
>> IOMMUs(according to which master block it belongs), it's a little like
>> our power domain:
>> https://elixir.free-electrons.com/linux/latest/source/arch/arm64/boot/dts/rockchip/rk3399.dtsi#L935
>>
>>
>>
>> i'm not sure how to describe this correctly, is it ok use something like
>> "the same as it's master block"?
>
> would it make sense to add a property to specify the master who owns the
> iommu, and we can get all clocks(only some of those clocks are actually
> needed) from it in the of_xlate()? and we can also reuse the clock-names
> of that master to build clk_bulk_data and log errors in clk_bulk_get.
I'm inclined to agree with Rob here - if we're to add anything to the
binding, it should only be whatever clock inputs are defined for the
IOMMU IP block itself. If Linux doesn't properly handle the interconnect
clock hierarchy external to a particular integration, that's a separate
issue and it's not the binding's problem.
I actually quite like the hack of "borrowing" the clocks from
dev->of_node in of_xlate() - you shouldn't need any DT changes for that,
because you already know that each IOMMU instance only has the one
master device anyway.
Robin.
Hi Robin,
Thanks for your reply.
On 02/28/2018 12:59 AM, Robin Murphy wrote:
>>> the rockchip IOMMU is part of the master block in hardware, so it needs
>>> to control the master's power domain and some of the master's clocks
>>> when access it's registers.
>>>
>>> and the number of clocks needed here, might be different between each
>>> IOMMUs(according to which master block it belongs), it's a little like
>>> our power domain:
>>> https://elixir.free-electrons.com/linux/latest/source/arch/arm64/boot/dts/rockchip/rk3399.dtsi#L935
>>>
>>>
>>>
>>> i'm not sure how to describe this correctly, is it ok use something like
>>> "the same as it's master block"?
>>
>> would it make sense to add a property to specify the master who owns
>> the iommu, and we can get all clocks(only some of those clocks are
>> actually needed) from it in the of_xlate()? and we can also reuse the
>> clock-names of that master to build clk_bulk_data and log errors in
>> clk_bulk_get.
>
> I'm inclined to agree with Rob here - if we're to add anything to the
> binding, it should only be whatever clock inputs are defined for the
> IOMMU IP block itself. If Linux doesn't properly handle the interconnect
> clock hierarchy external to a particular integration, that's a separate
> issue and it's not the binding's problem.
>
> I actually quite like the hack of "borrowing" the clocks from
> dev->of_node in of_xlate() - you shouldn't need any DT changes for that,
> because you already know that each IOMMU instance only has the one
> master device anyway.
Thanks:) but actually we are going to support sharing IOMMU between
multiple masters(one of them is the main master i think) in the newer
chips(not yet supported on upstream kernel)...
So we might have to get all clocks from all masters, or find a way to
specify the main master...and for the multiple masters case, do it in
of_xlate() turns out to be a little racy...maybe we can add a property
to specify main master, and get it's clocks in probe()?
>
> Robin.
On 28/02/18 13:00, JeffyChen wrote:
> Hi Robin,
>
> Thanks for your reply.
>
> On 02/28/2018 12:59 AM, Robin Murphy wrote:
>>>> the rockchip IOMMU is part of the master block in hardware, so it needs
>>>> to control the master's power domain and some of the master's clocks
>>>> when access it's registers.
>>>>
>>>> and the number of clocks needed here, might be different between each
>>>> IOMMUs(according to which master block it belongs), it's a little like
>>>> our power domain:
>>>> https://elixir.free-electrons.com/linux/latest/source/arch/arm64/boot/dts/rockchip/rk3399.dtsi#L935
>>>>
>>>>
>>>>
>>>>
>>>> i'm not sure how to describe this correctly, is it ok use something
>>>> like
>>>> "the same as it's master block"?
>>>
>>> would it make sense to add a property to specify the master who owns
>>> the iommu, and we can get all clocks(only some of those clocks are
>>> actually needed) from it in the of_xlate()? and we can also reuse the
>>> clock-names of that master to build clk_bulk_data and log errors in
>>> clk_bulk_get.
>>
>> I'm inclined to agree with Rob here - if we're to add anything to the
>> binding, it should only be whatever clock inputs are defined for the
>> IOMMU IP block itself. If Linux doesn't properly handle the interconnect
>> clock hierarchy external to a particular integration, that's a separate
>> issue and it's not the binding's problem.
>>
>> I actually quite like the hack of "borrowing" the clocks from
>> dev->of_node in of_xlate() - you shouldn't need any DT changes for that,
>> because you already know that each IOMMU instance only has the one
>> master device anyway.
>
> Thanks:) but actually we are going to support sharing IOMMU between
> multiple masters(one of them is the main master i think) in the newer
> chips(not yet supported on upstream kernel)...
Ha! OK, fair enough, back to the first point then...
> So we might have to get all clocks from all masters, or find a way to
> specify the main master...and for the multiple masters case, do it in
> of_xlate() turns out to be a little racy...maybe we can add a property
> to specify main master, and get it's clocks in probe()?
I notice that the 4.4 BSP kernel consistently specifies "aclk" and
"hclk" for the IOMMU instances - it feels unusual to say "why don't we
follow the downstream binding?", but it does look a lot like what I
would expect (I'd guess at one for the register slave interface and one
for the master interface/general operation?)
If we can implement conceptually-correct clock handling based on an
accurate binding, which should cover most cases, and *then* look at
hacking around those where it doesn't quite work in practice due to
shortcomings elsewhere, that would be ideal, and of course a lot nicer
than just jumping straight into piles of hacks.
Robin.
Hi Robin,
Thanks for your reply.
On 02/28/2018 11:06 PM, Robin Murphy wrote:
> On 28/02/18 13:00, JeffyChen wrote:
>> Hi Robin,
>>
>> Thanks for your reply.
>>
>> On 02/28/2018 12:59 AM, Robin Murphy wrote:
>>>>> the rockchip IOMMU is part of the master block in hardware, so it
>>>>> needs
>>>>> to control the master's power domain and some of the master's clocks
>>>>> when access it's registers.
>>>>>
>>>>> and the number of clocks needed here, might be different between each
>>>>> IOMMUs(according to which master block it belongs), it's a little like
>>>>> our power domain:
>>>>> https://elixir.free-electrons.com/linux/latest/source/arch/arm64/boot/dts/rockchip/rk3399.dtsi#L935
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> i'm not sure how to describe this correctly, is it ok use something
>>>>> like
>>>>> "the same as it's master block"?
>>>>
>>>> would it make sense to add a property to specify the master who owns
>>>> the iommu, and we can get all clocks(only some of those clocks are
>>>> actually needed) from it in the of_xlate()? and we can also reuse the
>>>> clock-names of that master to build clk_bulk_data and log errors in
>>>> clk_bulk_get.
>>>
>>> I'm inclined to agree with Rob here - if we're to add anything to the
>>> binding, it should only be whatever clock inputs are defined for the
>>> IOMMU IP block itself. If Linux doesn't properly handle the interconnect
>>> clock hierarchy external to a particular integration, that's a separate
>>> issue and it's not the binding's problem.
>>>
>>> I actually quite like the hack of "borrowing" the clocks from
>>> dev->of_node in of_xlate() - you shouldn't need any DT changes for that,
>>> because you already know that each IOMMU instance only has the one
>>> master device anyway.
>>
>> Thanks:) but actually we are going to support sharing IOMMU between
>> multiple masters(one of them is the main master i think) in the newer
>> chips(not yet supported on upstream kernel)...
>
> Ha! OK, fair enough, back to the first point then...
>
>> So we might have to get all clocks from all masters, or find a way to
>> specify the main master...and for the multiple masters case, do it in
>> of_xlate() turns out to be a little racy...maybe we can add a property
>> to specify main master, and get it's clocks in probe()?
>
> I notice that the 4.4 BSP kernel consistently specifies "aclk" and
> "hclk" for the IOMMU instances - it feels unusual to say "why don't we
> follow the downstream binding?", but it does look a lot like what I
> would expect (I'd guess at one for the register slave interface and one
> for the master interface/general operation?)
huh, right.
i did noticed that, but there's a hevc_mmu with ("aclk", "hclk",
"clk_core", "clk_cabac") confused me.
so confirmed with Simon, that hevc_mmu is wrong. currently all IOMMUs
should only have 2 clks, either aclk+hclk or aclk+pclk (depends on the
clk tree)
so it seems to be a good idea to do so, will send patches soon, thanks :)
>
> If we can implement conceptually-correct clock handling based on an
> accurate binding, which should cover most cases, and *then* look at
> hacking around those where it doesn't quite work in practice due to
> shortcomings elsewhere, that would be ideal, and of course a lot nicer
> than just jumping straight into piles of hacks.
>
> Robin.
>
>
>