2018-03-18 20:17:58

by Stefan Agner

Subject: [PATCH 1/3] ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support

This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.

Signed-off-by: Stefan Agner <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a308437b088..8947769cd449 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -214,11 +214,13 @@ CONFIG_CPU_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_RN5T618=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -229,6 +231,7 @@ CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_RN5T618=y
CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
--
2.16.2

2018-03-18 20:17:21

by Stefan Agner

Subject: [PATCH 3/3] ARM: imx_v6_v7_defconfig: enable Vybrid OCOTP driver

Enable the OCOTP NVMEM driver for Vybrid (vf610) SoCs.

Signed-off-by: Stefan Agner <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 67db78f8c9df..6ce94333be5c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -380,6 +380,7 @@ CONFIG_PWM=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IMX=y
CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_MUX_MMIO=y
--
2.16.2

2018-03-18 20:18:44

by Stefan Agner

Subject: [PATCH 2/3] ARM: imx_v6_v7_defconfig: add mwifiex driver

Enable Marvell mwifiex driver which is required to drive the
Wi2Wi WM828CC6 wireless module found on Colibri iMX6ULL.

Signed-off-by: Stefan Agner <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 8947769cd449..67db78f8c9df 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -153,6 +153,9 @@ CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_CDC_EEM=m
CONFIG_BRCMFMAC=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
--
2.16.2

2018-04-16 14:54:08

by Shawn Guo

Subject: Re: [PATCH 1/3] ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support

On Sun, Mar 18, 2018 at 09:15:08PM +0100, Stefan Agner wrote:
> This allows to successfully boot Colibri iMX7 which is using
> the Ricoh RN5T567 PMIC.
>
> Signed-off-by: Stefan Agner <[email protected]>

Applied all, thanks.