From: Xiaotong Lu <[email protected]>
This patch adds the binding documentation for Spreadtrum SC27xx series
vibrator device.
Signed-off-by: Xiaotong Lu <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v1:
- No updates.
---
.../bindings/input/sprd,sc27xx-vibra.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
new file mode 100644
index 0000000..92ead29
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
@@ -0,0 +1,12 @@
+Spreadtrum SC27xx PMIC Vibrator
+
+Required properties:
+- compatible: should be "sprd,sc27xx-vibrator".
+- reg: address of vibrator control register.
+
+Example :
+
+vibrator@eb4 {
+ compatible = "sprd,sc27xx-vibrator";
+ reg = <0xeb4>;
+};
--
1.7.9.5
From: Xiaotong Lu <[email protected]>
This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Xiaotong Lu <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v1:
- Remove input_ff_destroy() and input_unregister_device()
---
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sc27xx-vibra.c | 156 +++++++++++++++++++++++++++++++++++++
3 files changed, 167 insertions(+)
create mode 100644 drivers/input/misc/sc27xx-vibra.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 572b15f..c761c0c 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
To compile this driver as a module, choose M here: the
module will be called rave-sp-pwrbutton.
+config INPUT_SC27XX_VIBRA
+ tristate "Spreadtrum sc27xx vibrator support"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for Spreadtrum sc27xx vibrator driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called sc27xx_vibra.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 72cde28..9d0f9d1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
+obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
new file mode 100644
index 0000000..f78e70f
--- /dev/null
+++ b/drivers/input/misc/sc27xx-vibra.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN BIT(9)
+#define LDO_VIBR_PD BIT(8)
+
+struct vibra_info {
+ struct input_dev *input_dev;
+ struct work_struct play_work;
+ struct regmap *regmap;
+ u32 base;
+ u32 strength;
+ bool enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+ if (on) {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, 0);
+ info->enabled = true;
+ } else {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+ LDO_VIBR_PD);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+ info->enabled = false;
+ }
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+ return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+ struct vibra_info *info = container_of(work, struct vibra_info,
+ play_work);
+
+ if (info->strength && !info->enabled)
+ sc27xx_vibra_set(info, true);
+ else if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ info->strength = effect->u.rumble.weak_magnitude;
+ schedule_work(&info->play_work);
+
+ return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ cancel_work_sync(&info->play_work);
+ if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct vibra_info *info;
+ int ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!info->regmap) {
+ dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(node, "reg", &info->base);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+ return ret;
+ }
+
+ info->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!info->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ info->input_dev->name = "sc27xx:vibrator";
+ info->input_dev->id.version = 0;
+ info->input_dev->dev.parent = pdev->dev.parent;
+ info->input_dev->close = sc27xx_vibra_close;
+
+ input_set_drvdata(info->input_dev, info);
+ input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+ INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+ info->enabled = false;
+
+ ret = input_ff_create_memless(info->input_dev, NULL, sc27xx_vibra_play);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+ return ret;
+ }
+
+ ret = input_register_device(info->input_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register input device.\n");
+ return ret;
+ }
+
+ ret = sc27xx_vibra_hw_init(info);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+ { .compatible = "sprd,sc27xx-vibrator", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+ .driver = {
+ .name = "sc27xx-vibrator",
+ .of_match_table = sc27xx_vibra_of_match,
+ },
+ .probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <[email protected]>");
--
1.7.9.5
Hi Xiaotong,
On Mon, Apr 23, 2018 at 10:33:36AM +0800, Baolin Wang wrote:
> From: Xiaotong Lu <[email protected]>
>
> This patch adds the Spreadtrum vibrator driver, which embedded in the
> Spreadtrum SC27xx series PMICs.
>
> Signed-off-by: Xiaotong Lu <[email protected]>
> Signed-off-by: Baolin Wang <[email protected]>
> ---
> Changes since v1:
> - Remove input_ff_destroy() and input_unregister_device()
> ---
> drivers/input/misc/Kconfig | 10 +++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/sc27xx-vibra.c | 156 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 167 insertions(+)
> create mode 100644 drivers/input/misc/sc27xx-vibra.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 572b15f..c761c0c 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
> To compile this driver as a module, choose M here: the
> module will be called rave-sp-pwrbutton.
>
> +config INPUT_SC27XX_VIBRA
> + tristate "Spreadtrum sc27xx vibrator support"
> + depends on MFD_SC27XX_PMIC || COMPILE_TEST
> + select INPUT_FF_MEMLESS
> + help
> + This option enables support for Spreadtrum sc27xx vibrator driver.
> +
> + To compile this driver as a module, choose M here. The module will
> + be called sc27xx_vibra.
> +
> endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 72cde28..9d0f9d1 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
> obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
> obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
> obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
> +obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
> new file mode 100644
> index 0000000..f78e70f
> --- /dev/null
> +++ b/drivers/input/misc/sc27xx-vibra.c
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Spreadtrum Communications Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/input.h>
> +#include <linux/workqueue.h>
> +
> +#define CUR_DRV_CAL_SEL GENMASK(13, 12)
> +#define SLP_LDOVIBR_PD_EN BIT(9)
> +#define LDO_VIBR_PD BIT(8)
> +
> +struct vibra_info {
> + struct input_dev *input_dev;
> + struct work_struct play_work;
> + struct regmap *regmap;
> + u32 base;
> + u32 strength;
> + bool enabled;
> +};
> +
> +static void sc27xx_vibra_set(struct vibra_info *info, bool on)
> +{
> + if (on) {
> + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
> + regmap_update_bits(info->regmap, info->base,
> + SLP_LDOVIBR_PD_EN, 0);
> + info->enabled = true;
> + } else {
> + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
> + LDO_VIBR_PD);
> + regmap_update_bits(info->regmap, info->base,
> + SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
> + info->enabled = false;
> + }
> +}
> +
> +static int sc27xx_vibra_hw_init(struct vibra_info *info)
> +{
> + return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
> +}
> +
> +static void sc27xx_vibra_play_work(struct work_struct *work)
> +{
> + struct vibra_info *info = container_of(work, struct vibra_info,
> + play_work);
> +
> + if (info->strength && !info->enabled)
> + sc27xx_vibra_set(info, true);
> + else if (info->enabled)
> + sc27xx_vibra_set(info, false);
I do not think this is correct. If you issue 2 play requests with
info->strength that is not 0 then you'll end up disabling the vibrator.
I think you want the 2nd condition to be:
else if (info->strength == 0 && info->enabled)
sc27xx_vibra_set(info, false);
> +}
> +
> +static int sc27xx_vibra_play(struct input_dev *input, void *data,
> + struct ff_effect *effect)
> +{
> + struct vibra_info *info = input_get_drvdata(input);
> +
> + info->strength = effect->u.rumble.weak_magnitude;
> + schedule_work(&info->play_work);
> +
> + return 0;
> +}
> +
> +static void sc27xx_vibra_close(struct input_dev *input)
> +{
> + struct vibra_info *info = input_get_drvdata(input);
> +
> + cancel_work_sync(&info->play_work);
> + if (info->enabled)
> + sc27xx_vibra_set(info, false);
> +}
> +
> +static int sc27xx_vibra_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct vibra_info *info;
> + int ret;
Can we please call this variable "error"?
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!info->regmap) {
> + dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
> + return -ENODEV;
> + }
> +
> + ret = of_property_read_u32(node, "reg", &info->base);
I am fan of generic device properties, please change to
device_property_read_u32().
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get vibrator base address.\n");
> + return ret;
> + }
> +
> + info->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!info->input_dev) {
> + dev_err(&pdev->dev, "failed to allocate input device.\n");
> + return -ENOMEM;
> + }
> +
> + info->input_dev->name = "sc27xx:vibrator";
> + info->input_dev->id.version = 0;
> + info->input_dev->dev.parent = pdev->dev.parent;
Why is device reparented to the parent of platform device? This breaks
devm implementation for the input device. If you really need this,
you'll have to switch to unmanaged API.
> + info->input_dev->close = sc27xx_vibra_close;
> +
> + input_set_drvdata(info->input_dev, info);
> + input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
> + INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
> + info->enabled = false;
> +
> + ret = input_ff_create_memless(info->input_dev, NULL, sc27xx_vibra_play);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
> + return ret;
> + }
> +
> + ret = input_register_device(info->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register input device.\n");
> + return ret;
> + }
> +
> + ret = sc27xx_vibra_hw_init(info);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
> + return ret;
> + }
It is too late to initialize hardware after registering the input
device, as once registered it should be fully functional. I'd recommend
calling this before calling input_register_device(), or (maybe even
better) doing this as part of open() method.
> +
> + platform_set_drvdata(pdev, info);
I do not think you are using platform device's driver data anywhere.
> + return 0;
> +}
> +
> +static const struct of_device_id sc27xx_vibra_of_match[] = {
> + { .compatible = "sprd,sc27xx-vibrator", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
> +
> +static struct platform_driver sc27xx_vibra_driver = {
> + .driver = {
> + .name = "sc27xx-vibrator",
> + .of_match_table = sc27xx_vibra_of_match,
Do you need suspend support by chance? To shut off the vibrator when
system transitions to sleep?
> + },
> + .probe = sc27xx_vibra_probe,
> +};
> +
> +module_platform_driver(sc27xx_vibra_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Xiaotong Lu <[email protected]>");
> --
> 1.7.9.5
>
Thanks.
--
Dmitry
Hi Dmitry,
On 24 April 2018 at 01:29, Dmitry Torokhov <[email protected]> wrote:
> Hi Xiaotong,
>
> On Mon, Apr 23, 2018 at 10:33:36AM +0800, Baolin Wang wrote:
>> From: Xiaotong Lu <[email protected]>
>>
>> This patch adds the Spreadtrum vibrator driver, which embedded in the
>> Spreadtrum SC27xx series PMICs.
>>
>> Signed-off-by: Xiaotong Lu <[email protected]>
>> Signed-off-by: Baolin Wang <[email protected]>
>> ---
>> Changes since v1:
>> - Remove input_ff_destroy() and input_unregister_device()
>> ---
>> drivers/input/misc/Kconfig | 10 +++
>> drivers/input/misc/Makefile | 1 +
>> drivers/input/misc/sc27xx-vibra.c | 156 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 167 insertions(+)
>> create mode 100644 drivers/input/misc/sc27xx-vibra.c
>>
>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>> index 572b15f..c761c0c 100644
>> --- a/drivers/input/misc/Kconfig
>> +++ b/drivers/input/misc/Kconfig
>> @@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
>> To compile this driver as a module, choose M here: the
>> module will be called rave-sp-pwrbutton.
>>
>> +config INPUT_SC27XX_VIBRA
>> + tristate "Spreadtrum sc27xx vibrator support"
>> + depends on MFD_SC27XX_PMIC || COMPILE_TEST
>> + select INPUT_FF_MEMLESS
>> + help
>> + This option enables support for Spreadtrum sc27xx vibrator driver.
>> +
>> + To compile this driver as a module, choose M here. The module will
>> + be called sc27xx_vibra.
>> +
>> endif
>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>> index 72cde28..9d0f9d1 100644
>> --- a/drivers/input/misc/Makefile
>> +++ b/drivers/input/misc/Makefile
>> @@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
>> obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
>> obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
>> obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
>> +obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
>> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
>> obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
>> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
>> diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
>> new file mode 100644
>> index 0000000..f78e70f
>> --- /dev/null
>> +++ b/drivers/input/misc/sc27xx-vibra.c
>> @@ -0,0 +1,156 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Spreadtrum Communications Inc.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/input.h>
>> +#include <linux/workqueue.h>
>> +
>> +#define CUR_DRV_CAL_SEL GENMASK(13, 12)
>> +#define SLP_LDOVIBR_PD_EN BIT(9)
>> +#define LDO_VIBR_PD BIT(8)
>> +
>> +struct vibra_info {
>> + struct input_dev *input_dev;
>> + struct work_struct play_work;
>> + struct regmap *regmap;
>> + u32 base;
>> + u32 strength;
>> + bool enabled;
>> +};
>> +
>> +static void sc27xx_vibra_set(struct vibra_info *info, bool on)
>> +{
>> + if (on) {
>> + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
>> + regmap_update_bits(info->regmap, info->base,
>> + SLP_LDOVIBR_PD_EN, 0);
>> + info->enabled = true;
>> + } else {
>> + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
>> + LDO_VIBR_PD);
>> + regmap_update_bits(info->regmap, info->base,
>> + SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
>> + info->enabled = false;
>> + }
>> +}
>> +
>> +static int sc27xx_vibra_hw_init(struct vibra_info *info)
>> +{
>> + return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
>> +}
>> +
>> +static void sc27xx_vibra_play_work(struct work_struct *work)
>> +{
>> + struct vibra_info *info = container_of(work, struct vibra_info,
>> + play_work);
>> +
>> + if (info->strength && !info->enabled)
>> + sc27xx_vibra_set(info, true);
>> + else if (info->enabled)
>> + sc27xx_vibra_set(info, false);
>
> I do not think this is correct. If you issue 2 play requests with
> info->strength that is not 0 then you'll end up disabling the vibrator.
>
> I think you want the 2nd condition to be:
>
> else if (info->strength == 0 && info->enabled)
> sc27xx_vibra_set(info, false);
>
Yes, you are right. Will fix in next patch.
>
>> +}
>> +
>> +static int sc27xx_vibra_play(struct input_dev *input, void *data,
>> + struct ff_effect *effect)
>> +{
>> + struct vibra_info *info = input_get_drvdata(input);
>> +
>> + info->strength = effect->u.rumble.weak_magnitude;
>> + schedule_work(&info->play_work);
>> +
>> + return 0;
>> +}
>> +
>> +static void sc27xx_vibra_close(struct input_dev *input)
>> +{
>> + struct vibra_info *info = input_get_drvdata(input);
>> +
>> + cancel_work_sync(&info->play_work);
>> + if (info->enabled)
>> + sc27xx_vibra_set(info, false);
>> +}
>> +
>> +static int sc27xx_vibra_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + struct vibra_info *info;
>> + int ret;
>
> Can we please call this variable "error"?
Sure.
>
>> +
>> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
>> + if (!info)
>> + return -ENOMEM;
>> +
>> + info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
>> + if (!info->regmap) {
>> + dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
>> + return -ENODEV;
>> + }
>> +
>> + ret = of_property_read_u32(node, "reg", &info->base);
>
> I am fan of generic device properties, please change to
> device_property_read_u32().
OK.
>
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to get vibrator base address.\n");
>> + return ret;
>> + }
>> +
>> + info->input_dev = devm_input_allocate_device(&pdev->dev);
>> + if (!info->input_dev) {
>> + dev_err(&pdev->dev, "failed to allocate input device.\n");
>> + return -ENOMEM;
>> + }
>> +
>> + info->input_dev->name = "sc27xx:vibrator";
>> + info->input_dev->id.version = 0;
>> + info->input_dev->dev.parent = pdev->dev.parent;
>
> Why is device reparented to the parent of platform device? This breaks
> devm implementation for the input device. If you really need this,
> you'll have to switch to unmanaged API.
Sorry, this is one mistake and will fix it in next version.
>
>> + info->input_dev->close = sc27xx_vibra_close;
>> +
>> + input_set_drvdata(info->input_dev, info);
>> + input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
>> + INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
>> + info->enabled = false;
>> +
>> + ret = input_ff_create_memless(info->input_dev, NULL, sc27xx_vibra_play);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
>> + return ret;
>> + }
>> +
>> + ret = input_register_device(info->input_dev);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to register input device.\n");
>> + return ret;
>> + }
>> +
>> + ret = sc27xx_vibra_hw_init(info);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
>> + return ret;
>> + }
>
> It is too late to initialize hardware after registering the input
> device, as once registered it should be fully functional. I'd recommend
> calling this before calling input_register_device(), or (maybe even
> better) doing this as part of open() method.
OK.
>
>> +
>> + platform_set_drvdata(pdev, info);
>
> I do not think you are using platform device's driver data anywhere.
We can remove it.
>
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id sc27xx_vibra_of_match[] = {
>> + { .compatible = "sprd,sc27xx-vibrator", },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
>> +
>> +static struct platform_driver sc27xx_vibra_driver = {
>> + .driver = {
>> + .name = "sc27xx-vibrator",
>> + .of_match_table = sc27xx_vibra_of_match,
>
> Do you need suspend support by chance? To shut off the vibrator when
> system transitions to sleep?
We do not need the suspend support, disabling the vibrator is enough.
Thanks for your comments.
--
Baolin.wang
Best Regards