This series converts mach-davinci to use the common clock framework.
The series works like this, the first 3 patches fix some issues with the clock
drivers that have already been accepted into the mainline kernel.
Then, starting with "ARM: davinci: pass clock as parameter to
davinci_timer_init()", we get the mach code ready for the switch by adding the
code needed for the new clock drivers and adding #ifndef CONFIG_COMMON_CLK
around the legacy clocks so that we can switch easily between the old and the
new.
"ARM: davinci: switch to common clock framework" actually flips the switch
to start using the new clock drivers. Then the next 8 patches remove all
of the old clock code.
The final four patches add device tree clock support to the one SoC that
supports it.
This series has been tested on TI OMAP-L138 LCDK (both device tree and legacy
board file).
Changes:
v11 changes (also see individual patches for details):
- Proper unwinding on error in clk patches
- Dropped ref_clk fallback in device tree timer patch
- Fix W=1 and sparse warnings
v10 changes (also see individual patches for details):
- Reworked device tree bindings for DaVinci timer.
- Dropped helper functions to conditionally call devm_* versions of functions
- Fix some typos
- Fix some rebasing issues introduced in v9
v9 changes (also see individual patches for details):
- Rebased on linux-davnci/master (f5e3203bb775)
- Dropped drivers/clk patches that landed in v4.17
- New drivers/clk patches for early boot special case
- New patch for ti,davinci-timer device tree bindings
- Updated mach/davinci patches to register clocks in early boot when needed
v8 changes (also see individual patches for details):
- Rebased on linux-davinci/master
- Dropped use of __init and __initconst attributes in clk drivers
- Add clkdev lookups for PLL SYSCLKs
- Fix genpd clock reference counting issue
- Fix PSC clock driver loading order issue
- Fix typo in device tree and add more power-domains properties
v7 changes (also see individual patches for details):
- Rebased on linux-davinci/master (v4.16-rc)
- Convert clock drivers to platform devices
- New patch "ARM: davinci: pass clock as parameter to davinci_timer_init()"
- Fix issues with lcdk and aemif clock lookups and power domains
- Fixed other minor issues brought up in v6 review
v6 changes (also see individual patches for details):
- All of the device tree bindings are changed
- All of the clock drivers are changed significantly
- Fixed issues brought up during review of v5
- "ARM: davinci: move davinci_clk_init() to init_time" is removed from this
series and submitted separately
v5 changes:
- Basically, this is an entirely new series
- Patches are broken up into bite-sized pieces
- Converted PSC clock driver to use regmap
- Restored "force" flag for certain DA850 clocks
- Added device tree bindings
- Moved more of the clock init to drivers/clk
- Fixed frequency scaling (maybe*)
* I have frequency scaling using cpufreq-dt, so I know the clocks are doing
what they need to do to make this work, but I haven't figured out how to
test davinci-cpufreq driver yet. (Patches to make cpufreq-dt work will be
sent separately after this series has landed.)
Dependencies:
There are still some outstanding fixes to get everything working correctly.
For the most part, these are just runtime dependencies and only needed for
certain platforms.
Of the clk patches, only "clk: davinci: psc-da830: fix USB0 48MHz PHY clock
registration" has been picked up in clk-next so far. Theoretically, there has
been a pull request made for "drm/tilcdc: Fix setting clock divider for
omap-l138", but I haven't seen it land anywhere yet. The series "remoteproc/
davinci: common clock framework related fixes" is in rproc-next already.
- "drm/tilcdc: Fix setting clock divider for omap-l138"[1]
- "clk: davinci: pll-dm355: fix SYSCLKn parent names"[2]
- "remoteproc/davinci: common clock framework related fixes"[3]
- "clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration"[4]
- "clk: davinci: some more fixes"[5]
- "clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups"[6]
[1]: https://patchwork.freedesktop.org/patch/210696/
[2]: https://lkml.org/lkml/2018/5/9/626
[3]: https://lkml.org/lkml/2018/5/2/201
[4]: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/commit/?h=clk-davinci-psc-da830&id=a714dceb721407c2a5d2887938f37e34ed00669c
[5]: https://www.spinics.net/lists/arm-kernel/msg652656.html
[6]: https://patchwork.kernel.org/patch/10395979/
You can find a working branch with everything included (plus a few extras, like
cpufreq-dt) in the "common-clk-v11" branch of https://github.com/dlech/ev3dev-kernel.git.
Testing/debugging for the uninitiated:
I only have one device to test with, which is based on da850, so I will
have to rely on others to do some testing here. Since we are dealing with
clocks, if something isn't working, you most likely won't see output on
the serial port. To figure out what is going on, you need to enable...
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
and add "earlyprintk clk_ignore_unused" to the kernel command line options.
You may need to select a different UART for this depending on your board. I
think UART1 is the default in the kernel configuration.
On da850 devices comment out the lines:
/* pll1_sysclk2 is not affected by CPU scaling, so use it for async3 */
parent = clk_hw_get_parent_by_index(&mux->hw, 1);
if (parent)
clk_set_parent(mux->hw.clk, parent->clk);
else
dev_warn(dev, "Failed to find async3 parent clock\n");
in da8xx-cfgchip.c or, if using device tree, comment out the lines:
assigned-clocks = <&async3_clk>;
assigned-clock-parents = <&pll1_sysclk 2>;
in da850.dtsi when doing earlyprintk, otherwise the UART1 and UART2 clock
source will change during boot and cause garbled output after a point.
David Lechner (27):
clk: davinci: pll: allow dev == NULL
clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE
clk: davinci: psc: allow for dev == NULL
ARM: davinci: pass clock as parameter to davinci_timer_init()
ARM: davinci: da830: add new clock init using common clock framework
ARM: davinci: da850: add new clock init using common clock framework
ARM: davinci: dm355: add new clock init using common clock framework
ARM: davinci: dm365: add new clock init using common clock framework
ARM: davinci: dm644x: add new clock init using common clock framework
ARM: davinci: dm646x: add new clock init using common clock framework
ARM: davinci: da8xx: add new USB PHY clock init using common clock
framework
ARM: davinci: da8xx: add new sata_refclk init using common clock
framework
ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci: switch to common clock framework
ARM: davinci: da830: Remove legacy clock init
ARM: davinci: da850: Remove legacy clock init
ARM: davinci: dm355: Remove legacy clock init
ARM: davinci: dm365: Remove legacy clock init
ARM: davinci: dm644x: Remove legacy clock init
ARM: davinci: dm646x: Remove legacy clock init
ARM: davinci: da8xx: Remove legacy USB and SATA clock init
ARM: davinci: remove legacy clocks
dt-bindings: timer: new bindings for TI DaVinci timer
ARM: davinci: add device tree support to timer
ARM: davinci: da8xx-dt: switch to device tree clocks
ARM: dts: da850: Add clocks
.../bindings/timer/ti,davinci-timer.txt | 37 +
arch/arm/Kconfig | 5 +-
arch/arm/boot/dts/da850-enbw-cmc.dts | 4 +
arch/arm/boot/dts/da850-evm.dts | 4 +
arch/arm/boot/dts/da850-lcdk.dts | 9 +
arch/arm/boot/dts/da850-lego-ev3.dts | 4 +
arch/arm/boot/dts/da850.dtsi | 168 ++++
arch/arm/configs/davinci_all_defconfig | 1 -
arch/arm/mach-davinci/Kconfig | 13 +-
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/board-da830-evm.c | 12 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +
arch/arm/mach-davinci/board-dm355-evm.c | 2 +
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +
arch/arm/mach-davinci/board-dm365-evm.c | 2 +
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +
arch/arm/mach-davinci/board-mityomapl138.c | 2 +
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +
arch/arm/mach-davinci/board-omapl138-hawk.c | 11 +-
arch/arm/mach-davinci/board-sffsdr.c | 2 +
arch/arm/mach-davinci/clock.c | 745 -----------------
arch/arm/mach-davinci/clock.h | 76 --
arch/arm/mach-davinci/common.c | 3 -
arch/arm/mach-davinci/da830.c | 462 ++---------
arch/arm/mach-davinci/da850.c | 778 +++---------------
arch/arm/mach-davinci/da8xx-dt.c | 66 --
arch/arm/mach-davinci/davinci.h | 8 +
arch/arm/mach-davinci/devices-da8xx.c | 43 +-
arch/arm/mach-davinci/devices.c | 1 -
arch/arm/mach-davinci/dm355.c | 406 ++-------
arch/arm/mach-davinci/dm365.c | 485 +----------
arch/arm/mach-davinci/dm644x.c | 344 +-------
arch/arm/mach-davinci/dm646x.c | 372 +--------
arch/arm/mach-davinci/include/mach/clock.h | 3 -
arch/arm/mach-davinci/include/mach/common.h | 11 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 6 +-
arch/arm/mach-davinci/pm_domain.c | 5 +
arch/arm/mach-davinci/psc.c | 137 ---
arch/arm/mach-davinci/psc.h | 12 -
arch/arm/mach-davinci/time.c | 22 +-
arch/arm/mach-davinci/usb-da8xx.c | 242 +-----
drivers/clk/davinci/pll-da830.c | 5 +-
drivers/clk/davinci/pll-da850.c | 37 +-
drivers/clk/davinci/pll-dm355.c | 9 +-
drivers/clk/davinci/pll-dm365.c | 9 +-
drivers/clk/davinci/pll-dm644x.c | 9 +-
drivers/clk/davinci/pll-dm646x.c | 9 +-
drivers/clk/davinci/pll.c | 279 +++++--
drivers/clk/davinci/pll.h | 30 +-
drivers/clk/davinci/psc-dm355.c | 3 +-
drivers/clk/davinci/psc-dm365.c | 3 +-
drivers/clk/davinci/psc-dm644x.c | 3 +-
drivers/clk/davinci/psc-dm646x.c | 3 +-
drivers/clk/davinci/psc.c | 58 +-
include/linux/clk/davinci.h | 29 +
56 files changed, 1005 insertions(+), 3998 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
delete mode 100644 arch/arm/mach-davinci/clock.c
delete mode 100644 arch/arm/mach-davinci/psc.c
create mode 100644 include/linux/clk/davinci.h
--
2.17.0
This modifies the TI Davinci PLL clock driver to allow for the case
when dev == NULL. On some (most) SoCs that use this driver, the PLL
clock needs to be registered during early boot because it is used
for clocksource/clkevent and there will be no platform device available.
Some function declarations are moved to a public header files so that they can
be called from mach init code.
Also fix some missing @dev doc comments that would have been touched in this
patch anyway.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- proper unwinding on errors
- add #include <linux/clk/davinci.h> to avoid W=1 warnings
- fix more @dev in doc comments to avoid sparse warning
v10 changes:
- dropped helper functions that called devm_* versions of functions.
- removed duplicate function declarations from pll.h
v9 changes:
- new patch in v9
drivers/clk/davinci/pll-da830.c | 5 +-
drivers/clk/davinci/pll-da850.c | 22 +--
drivers/clk/davinci/pll-dm355.c | 9 +-
drivers/clk/davinci/pll-dm365.c | 9 +-
drivers/clk/davinci/pll-dm644x.c | 9 +-
drivers/clk/davinci/pll-dm646x.c | 9 +-
drivers/clk/davinci/pll.c | 275 +++++++++++++++++++++----------
drivers/clk/davinci/pll.h | 30 ++--
include/linux/clk/davinci.h | 24 +++
9 files changed, 256 insertions(+), 136 deletions(-)
create mode 100644 include/linux/clk/davinci.h
diff --git a/drivers/clk/davinci/pll-da830.c b/drivers/clk/davinci/pll-da830.c
index 929a3d3a9adb..0a0d06fb25fd 100644
--- a/drivers/clk/davinci/pll-da830.c
+++ b/drivers/clk/davinci/pll-da830.c
@@ -6,6 +6,7 @@
*/
#include <linux/clkdev.h>
+#include <linux/clk/davinci.h>
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -36,11 +37,11 @@ SYSCLK(5, pll0_sysclk5, pll0_pllen, 5, 0);
SYSCLK(6, pll0_sysclk6, pll0_pllen, 5, SYSCLK_FIXED_DIV);
SYSCLK(7, pll0_sysclk7, pll0_pllen, 5, 0);
-int da830_pll_init(struct device *dev, void __iomem *base)
+int da830_pll_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &da830_pll_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &da830_pll_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll0_sysclk2, base);
clk_register_clkdev(clk, "pll0_sysclk2", "da830-psc0");
diff --git a/drivers/clk/davinci/pll-da850.c b/drivers/clk/davinci/pll-da850.c
index 2a038b7908cc..59cc2e3733f9 100644
--- a/drivers/clk/davinci/pll-da850.c
+++ b/drivers/clk/davinci/pll-da850.c
@@ -7,7 +7,9 @@
#include <linux/bitops.h>
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mfd/da8xx-cfgchip.h>
@@ -81,11 +83,11 @@ static const struct davinci_pll_obsclk_info da850_pll0_obsclk_info = {
.ocsrc_mask = GENMASK(4, 0),
};
-int da850_pll0_init(struct device *dev, void __iomem *base)
+int da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &da850_pll0_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &da850_pll0_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll0_sysclk1, base);
clk_register_clkdev(clk, "pll0_sysclk1", "da850-psc0");
@@ -134,11 +136,11 @@ static const struct davinci_pll_sysclk_info *da850_pll0_sysclk_info[] = {
NULL
};
-int of_da850_pll0_init(struct device *dev, void __iomem *base)
+int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
- return of_davinci_pll_init(dev, &da850_pll0_info,
+ return of_davinci_pll_init(dev, dev->of_node, &da850_pll0_info,
&da850_pll0_obsclk_info,
- da850_pll0_sysclk_info, 7, base);
+ da850_pll0_sysclk_info, 7, base, cfgchip);
}
static const struct davinci_pll_clk_info da850_pll1_info = {
@@ -179,11 +181,11 @@ static const struct davinci_pll_obsclk_info da850_pll1_obsclk_info = {
.ocsrc_mask = GENMASK(4, 0),
};
-int da850_pll1_init(struct device *dev, void __iomem *base)
+int da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &da850_pll1_info, "oscin", base);
+ davinci_pll_clk_register(dev, &da850_pll1_info, "oscin", base, cfgchip);
davinci_pll_sysclk_register(dev, &pll1_sysclk1, base);
@@ -204,9 +206,9 @@ static const struct davinci_pll_sysclk_info *da850_pll1_sysclk_info[] = {
NULL
};
-int of_da850_pll1_init(struct device *dev, void __iomem *base)
+int of_da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
- return of_davinci_pll_init(dev, &da850_pll1_info,
+ return of_davinci_pll_init(dev, dev->of_node, &da850_pll1_info,
&da850_pll1_obsclk_info,
- da850_pll1_sysclk_info, 3, base);
+ da850_pll1_sysclk_info, 3, base, cfgchip);
}
diff --git a/drivers/clk/davinci/pll-dm355.c b/drivers/clk/davinci/pll-dm355.c
index 93f4a53d6b44..505aed80be9a 100644
--- a/drivers/clk/davinci/pll-dm355.c
+++ b/drivers/clk/davinci/pll-dm355.c
@@ -6,6 +6,7 @@
*/
#include <linux/bitops.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -27,11 +28,11 @@ SYSCLK(2, pll1_sysclk2, pll1_pllen, 5, SYSCLK_FIXED_DIV | SYSCLK_ALWAYS_ENABLED)
SYSCLK(3, pll1_sysclk3, pll1_pllen, 5, SYSCLK_ALWAYS_ENABLED);
SYSCLK(4, pll1_sysclk4, pll1_pllen, 5, SYSCLK_ALWAYS_ENABLED);
-int dm355_pll1_init(struct device *dev, void __iomem *base)
+int dm355_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &dm355_pll1_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &dm355_pll1_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll1_sysclk1, base);
clk_register_clkdev(clk, "pll1_sysclk1", "dm355-psc");
@@ -64,9 +65,9 @@ static const struct davinci_pll_clk_info dm355_pll2_info = {
SYSCLK(1, pll2_sysclk1, pll2_pllen, 5, SYSCLK_FIXED_DIV | SYSCLK_ALWAYS_ENABLED);
-int dm355_pll2_init(struct device *dev, void __iomem *base)
+int dm355_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
- davinci_pll_clk_register(dev, &dm355_pll2_info, "oscin", base);
+ davinci_pll_clk_register(dev, &dm355_pll2_info, "oscin", base, cfgchip);
davinci_pll_sysclk_register(dev, &pll2_sysclk1, base);
diff --git a/drivers/clk/davinci/pll-dm365.c b/drivers/clk/davinci/pll-dm365.c
index 5f8d9f42d0f3..2d29712753a3 100644
--- a/drivers/clk/davinci/pll-dm365.c
+++ b/drivers/clk/davinci/pll-dm365.c
@@ -7,6 +7,7 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
+#include <linux/clk/davinci.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -56,11 +57,11 @@ static const struct davinci_pll_obsclk_info dm365_pll1_obsclk_info = {
.ocsrc_mask = BIT(4),
};
-int dm365_pll1_init(struct device *dev, void __iomem *base)
+int dm365_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &dm365_pll1_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &dm365_pll1_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll1_sysclk1, base);
clk_register_clkdev(clk, "pll1_sysclk1", "dm365-psc");
@@ -119,11 +120,11 @@ static const struct davinci_pll_obsclk_info dm365_pll2_obsclk_info = {
.ocsrc_mask = BIT(4),
};
-int dm365_pll2_init(struct device *dev, void __iomem *base)
+int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &dm365_pll2_info, "oscin", base);
+ davinci_pll_clk_register(dev, &dm365_pll2_info, "oscin", base, cfgchip);
davinci_pll_sysclk_register(dev, &pll2_sysclk1, base);
diff --git a/drivers/clk/davinci/pll-dm644x.c b/drivers/clk/davinci/pll-dm644x.c
index 69bf785377cf..7650fadfaac8 100644
--- a/drivers/clk/davinci/pll-dm644x.c
+++ b/drivers/clk/davinci/pll-dm644x.c
@@ -6,6 +6,7 @@
*/
#include <linux/bitops.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -27,11 +28,11 @@ SYSCLK(2, pll1_sysclk2, pll1_pllen, 4, SYSCLK_FIXED_DIV);
SYSCLK(3, pll1_sysclk3, pll1_pllen, 4, SYSCLK_FIXED_DIV);
SYSCLK(5, pll1_sysclk5, pll1_pllen, 4, SYSCLK_FIXED_DIV);
-int dm644x_pll1_init(struct device *dev, void __iomem *base)
+int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &dm644x_pll1_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &dm644x_pll1_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll1_sysclk1, base);
clk_register_clkdev(clk, "pll1_sysclk1", "dm644x-psc");
@@ -66,9 +67,9 @@ static const struct davinci_pll_clk_info dm644x_pll2_info = {
SYSCLK(1, pll2_sysclk1, pll2_pllen, 4, 0);
SYSCLK(2, pll2_sysclk2, pll2_pllen, 4, 0);
-int dm644x_pll2_init(struct device *dev, void __iomem *base)
+int dm644x_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
- davinci_pll_clk_register(dev, &dm644x_pll2_info, "oscin", base);
+ davinci_pll_clk_register(dev, &dm644x_pll2_info, "oscin", base, cfgchip);
davinci_pll_sysclk_register(dev, &pll2_sysclk1, base);
diff --git a/drivers/clk/davinci/pll-dm646x.c b/drivers/clk/davinci/pll-dm646x.c
index 0ae827e3ce80..26982970df0e 100644
--- a/drivers/clk/davinci/pll-dm646x.c
+++ b/drivers/clk/davinci/pll-dm646x.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -29,11 +30,11 @@ SYSCLK(6, pll1_sysclk6, pll1_pllen, 4, 0);
SYSCLK(8, pll1_sysclk8, pll1_pllen, 4, 0);
SYSCLK(9, pll1_sysclk9, pll1_pllen, 4, 0);
-int dm646x_pll1_init(struct device *dev, void __iomem *base)
+int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
struct clk *clk;
- davinci_pll_clk_register(dev, &dm646x_pll1_info, "ref_clk", base);
+ davinci_pll_clk_register(dev, &dm646x_pll1_info, "ref_clk", base, cfgchip);
clk = davinci_pll_sysclk_register(dev, &pll1_sysclk1, base);
clk_register_clkdev(clk, "pll1_sysclk1", "dm646x-psc");
@@ -74,9 +75,9 @@ static const struct davinci_pll_clk_info dm646x_pll2_info = {
SYSCLK(1, pll2_sysclk1, pll2_pllen, 4, SYSCLK_ALWAYS_ENABLED);
-int dm646x_pll2_init(struct device *dev, void __iomem *base)
+int dm646x_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
{
- davinci_pll_clk_register(dev, &dm646x_pll2_info, "oscin", base);
+ davinci_pll_clk_register(dev, &dm646x_pll2_info, "oscin", base, cfgchip);
davinci_pll_sysclk_register(dev, &pll2_sysclk1, base);
diff --git a/drivers/clk/davinci/pll.c b/drivers/clk/davinci/pll.c
index 23a24c944f1d..ae5f966b503f 100644
--- a/drivers/clk/davinci/pll.c
+++ b/drivers/clk/davinci/pll.c
@@ -11,6 +11,7 @@
#include <linux/clk-provider.h>
#include <linux/clk.h>
+#include <linux/clk/davinci.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -223,6 +224,7 @@ static const struct clk_ops dm365_pll_ops = {
/**
* davinci_pll_div_register - common *DIV clock implementation
+ * @dev: The PLL platform device or NULL
* @name: the clock name
* @parent_name: the parent clock name
* @reg: the *DIV register
@@ -240,17 +242,21 @@ static struct clk *davinci_pll_div_register(struct device *dev,
const struct clk_ops *divider_ops = &clk_divider_ops;
struct clk_gate *gate;
struct clk_divider *divider;
+ struct clk *clk;
+ int ret;
- gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->reg = reg;
gate->bit_idx = DIV_ENABLE_SHIFT;
- divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
- if (!divider)
- return ERR_PTR(-ENOMEM);
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider) {
+ ret = -ENOMEM;
+ goto err_free_gate;
+ }
divider->reg = reg;
divider->shift = DIV_RATIO_SHIFT;
@@ -261,9 +267,22 @@ static struct clk *davinci_pll_div_register(struct device *dev,
divider_ops = &clk_divider_ro_ops;
}
- return clk_register_composite(dev, name, parent_names, num_parents,
- NULL, NULL, ÷r->hw, divider_ops,
- &gate->hw, &clk_gate_ops, flags);
+ clk = clk_register_composite(dev, name, parent_names, num_parents,
+ NULL, NULL, ÷r->hw, divider_ops,
+ &gate->hw, &clk_gate_ops, flags);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto err_free_divider;
+ }
+
+ return clk;
+
+err_free_divider:
+ kfree(divider);
+err_free_gate:
+ kfree(gate);
+
+ return ERR_PTR(ret);
}
struct davinci_pllen_clk {
@@ -321,36 +340,17 @@ static int davinci_pllen_rate_change(struct notifier_block *nb,
return NOTIFY_OK;
}
-static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev)
-{
- struct davinci_pll_platform_data *pdata = dev_get_platdata(dev);
-
- /*
- * Platform data is optional, so allocate a new struct if one was not
- * provided. For device tree, this will always be the case.
- */
- if (!pdata)
- pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- /* for device tree, we need to fill in the struct */
- if (dev->of_node)
- pdata->cfgchip =
- syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
-
- return pdata;
-}
-
static struct notifier_block davinci_pllen_notifier = {
.notifier_call = davinci_pllen_rate_change,
};
/**
* davinci_pll_clk_register - Register a PLL clock
+ * @dev: The PLL platform device or NULL
* @info: The device-specific clock info
* @parent_name: The parent clock name
* @base: The PLL's memory region
+ * @cfgchip: CFGCHIP syscon regmap for info->unlock_reg or NULL
*
* This creates a series of clocks that represent the PLL.
*
@@ -366,9 +366,9 @@ static struct notifier_block davinci_pllen_notifier = {
struct clk *davinci_pll_clk_register(struct device *dev,
const struct davinci_pll_clk_info *info,
const char *parent_name,
- void __iomem *base)
+ void __iomem *base,
+ struct regmap *cfgchip)
{
- struct davinci_pll_platform_data *pdata;
char prediv_name[MAX_NAME_SIZE];
char pllout_name[MAX_NAME_SIZE];
char postdiv_name[MAX_NAME_SIZE];
@@ -376,11 +376,12 @@ struct clk *davinci_pll_clk_register(struct device *dev,
struct clk_init_data init;
struct davinci_pll_clk *pllout;
struct davinci_pllen_clk *pllen;
- struct clk *pllout_clk, *clk;
-
- pdata = davinci_pll_get_pdata(dev);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
+ struct clk *oscin_clk = NULL;
+ struct clk *prediv_clk = NULL;
+ struct clk *pllout_clk;
+ struct clk *postdiv_clk = NULL;
+ struct clk *pllen_clk;
+ int ret;
if (info->flags & PLL_HAS_CLKMODE) {
/*
@@ -392,10 +393,10 @@ struct clk *davinci_pll_clk_register(struct device *dev,
* a number of different things. In this driver we use it to
* mean the signal after the PLLCTL[CLKMODE] switch.
*/
- clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME,
- parent_name, 0, 1, 1);
- if (IS_ERR(clk))
- return clk;
+ oscin_clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME,
+ parent_name, 0, 1, 1);
+ if (IS_ERR(oscin_clk))
+ return oscin_clk;
parent_name = OSCIN_CLK_NAME;
}
@@ -411,30 +412,34 @@ struct clk *davinci_pll_clk_register(struct device *dev,
/* Some? DM355 chips don't correctly report the PREDIV value */
if (info->flags & PLL_PREDIV_FIXED8)
- clk = clk_register_fixed_factor(dev, prediv_name,
- parent_name, flags, 1, 8);
+ prediv_clk = clk_register_fixed_factor(dev, prediv_name,
+ parent_name, flags, 1, 8);
else
- clk = davinci_pll_div_register(dev, prediv_name,
+ prediv_clk = davinci_pll_div_register(dev, prediv_name,
parent_name, base + PREDIV, fixed, flags);
- if (IS_ERR(clk))
- return clk;
+ if (IS_ERR(prediv_clk)) {
+ ret = PTR_ERR(prediv_clk);
+ goto err_unregister_oscin;
+ }
parent_name = prediv_name;
}
/* Unlock writing to PLL registers */
if (info->unlock_reg) {
- if (IS_ERR_OR_NULL(pdata->cfgchip))
+ if (IS_ERR_OR_NULL(cfgchip))
dev_warn(dev, "Failed to get CFGCHIP (%ld)\n",
- PTR_ERR(pdata->cfgchip));
+ PTR_ERR(cfgchip));
else
- regmap_write_bits(pdata->cfgchip, info->unlock_reg,
+ regmap_write_bits(cfgchip, info->unlock_reg,
info->unlock_mask, 0);
}
- pllout = devm_kzalloc(dev, sizeof(*pllout), GFP_KERNEL);
- if (!pllout)
- return ERR_PTR(-ENOMEM);
+ pllout = kzalloc(sizeof(*pllout), GFP_KERNEL);
+ if (!pllout) {
+ ret = -ENOMEM;
+ goto err_unregister_prediv;
+ }
snprintf(pllout_name, MAX_NAME_SIZE, "%s_pllout", info->name);
@@ -456,9 +461,11 @@ struct clk *davinci_pll_clk_register(struct device *dev,
pllout->pllm_min = info->pllm_min;
pllout->pllm_max = info->pllm_max;
- pllout_clk = devm_clk_register(dev, &pllout->hw);
- if (IS_ERR(pllout_clk))
- return pllout_clk;
+ pllout_clk = clk_register(dev, &pllout->hw);
+ if (IS_ERR(pllout_clk)) {
+ ret = PTR_ERR(pllout_clk);
+ goto err_free_pllout;
+ }
clk_hw_set_rate_range(&pllout->hw, info->pllout_min_rate,
info->pllout_max_rate);
@@ -474,17 +481,21 @@ struct clk *davinci_pll_clk_register(struct device *dev,
if (info->flags & PLL_POSTDIV_ALWAYS_ENABLED)
flags |= CLK_IS_CRITICAL;
- clk = davinci_pll_div_register(dev, postdiv_name, parent_name,
- base + POSTDIV, fixed, flags);
- if (IS_ERR(clk))
- return clk;
+ postdiv_clk = davinci_pll_div_register(dev, postdiv_name,
+ parent_name, base + POSTDIV, fixed, flags);
+ if (IS_ERR(postdiv_clk)) {
+ ret = PTR_ERR(postdiv_clk);
+ goto err_unregister_pllout;
+ }
parent_name = postdiv_name;
}
- pllen = devm_kzalloc(dev, sizeof(*pllout), GFP_KERNEL);
- if (!pllen)
- return ERR_PTR(-ENOMEM);
+ pllen = kzalloc(sizeof(*pllout), GFP_KERNEL);
+ if (!pllen) {
+ ret = -ENOMEM;
+ goto err_unregister_postdiv;
+ }
snprintf(pllen_name, MAX_NAME_SIZE, "%s_pllen", info->name);
@@ -497,17 +508,35 @@ struct clk *davinci_pll_clk_register(struct device *dev,
pllen->hw.init = &init;
pllen->base = base;
- clk = devm_clk_register(dev, &pllen->hw);
- if (IS_ERR(clk))
- return clk;
+ pllen_clk = clk_register(dev, &pllen->hw);
+ if (IS_ERR(pllen_clk)) {
+ ret = PTR_ERR(pllen_clk);
+ goto err_free_pllen;
+ }
- clk_notifier_register(clk, &davinci_pllen_notifier);
+ clk_notifier_register(pllen_clk, &davinci_pllen_notifier);
return pllout_clk;
+
+err_free_pllen:
+ kfree(pllen);
+err_unregister_postdiv:
+ clk_unregister(postdiv_clk);
+err_unregister_pllout:
+ clk_unregister(pllout_clk);
+err_free_pllout:
+ kfree(pllout);
+err_unregister_prediv:
+ clk_unregister(prediv_clk);
+err_unregister_oscin:
+ clk_unregister(oscin_clk);
+
+ return ERR_PTR(ret);
}
/**
* davinci_pll_auxclk_register - Register bypass clock (AUXCLK)
+ * @dev: The PLL platform device or NULL
* @name: The clock name
* @base: The PLL memory region
*/
@@ -521,6 +550,7 @@ struct clk *davinci_pll_auxclk_register(struct device *dev,
/**
* davinci_pll_sysclkbp_clk_register - Register bypass divider clock (SYSCLKBP)
+ * @dev: The PLL platform device or NULL
* @name: The clock name
* @base: The PLL memory region
*/
@@ -535,6 +565,7 @@ struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev,
/**
* davinci_pll_obsclk_register - Register oscillator divider clock (OBSCLK)
+ * @dev: The PLL platform device or NULL
* @info: The clock info
* @base: The PLL memory region
*/
@@ -546,9 +577,11 @@ davinci_pll_obsclk_register(struct device *dev,
struct clk_mux *mux;
struct clk_gate *gate;
struct clk_divider *divider;
+ struct clk *clk;
u32 oscdiv;
+ int ret;
- mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
return ERR_PTR(-ENOMEM);
@@ -556,16 +589,20 @@ davinci_pll_obsclk_register(struct device *dev,
mux->table = info->table;
mux->mask = info->ocsrc_mask;
- gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
- if (!gate)
- return ERR_PTR(-ENOMEM);
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_free_mux;
+ }
gate->reg = base + CKEN;
gate->bit_idx = CKEN_OBSCLK_SHIFT;
- divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
- if (!divider)
- return ERR_PTR(-ENOMEM);
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider) {
+ ret = -ENOMEM;
+ goto err_free_gate;
+ }
divider->reg = base + OSCDIV;
divider->shift = DIV_RATIO_SHIFT;
@@ -576,11 +613,27 @@ davinci_pll_obsclk_register(struct device *dev,
oscdiv |= BIT(DIV_ENABLE_SHIFT);
writel(oscdiv, base + OSCDIV);
- return clk_register_composite(dev, info->name, info->parent_names,
- info->num_parents,
- &mux->hw, &clk_mux_ops,
- ÷r->hw, &clk_divider_ops,
- &gate->hw, &clk_gate_ops, 0);
+ clk = clk_register_composite(dev, info->name, info->parent_names,
+ info->num_parents,
+ &mux->hw, &clk_mux_ops,
+ ÷r->hw, &clk_divider_ops,
+ &gate->hw, &clk_gate_ops, 0);
+
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto err_free_divider;
+ }
+
+ return clk;
+
+err_free_divider:
+ kfree(divider);
+err_free_gate:
+ kfree(gate);
+err_free_mux:
+ kfree(mux);
+
+ return ERR_PTR(ret);
}
/* The PLL SYSCLKn clocks have a mechanism for synchronizing rate changes. */
@@ -616,6 +669,7 @@ static struct notifier_block davinci_pll_sysclk_notifier = {
/**
* davinci_pll_sysclk_register - Register divider clocks (SYSCLKn)
+ * @dev: The PLL platform device or NULL
* @info: The clock info
* @base: The PLL memory region
*/
@@ -630,6 +684,7 @@ davinci_pll_sysclk_register(struct device *dev,
struct clk *clk;
u32 reg;
u32 flags = 0;
+ int ret;
/* PLLDIVn registers are not entirely consecutive */
if (info->id < 4)
@@ -637,16 +692,18 @@ davinci_pll_sysclk_register(struct device *dev,
else
reg = PLLDIV4 + 4 * (info->id - 4);
- gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->reg = base + reg;
gate->bit_idx = DIV_ENABLE_SHIFT;
- divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
- if (!divider)
- return ERR_PTR(-ENOMEM);
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider) {
+ ret = -ENOMEM;
+ goto err_free_gate;
+ }
divider->reg = base + reg;
divider->shift = DIV_RATIO_SHIFT;
@@ -668,22 +725,31 @@ davinci_pll_sysclk_register(struct device *dev,
clk = clk_register_composite(dev, info->name, &info->parent_name, 1,
NULL, NULL, ÷r->hw, divider_ops,
&gate->hw, &clk_gate_ops, flags);
- if (IS_ERR(clk))
- return clk;
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto err_free_divider;
+ }
clk_notifier_register(clk, &davinci_pll_sysclk_notifier);
return clk;
+
+err_free_divider:
+ kfree(divider);
+err_free_gate:
+ kfree(gate);
+
+ return ERR_PTR(ret);
}
-int of_davinci_pll_init(struct device *dev,
+int of_davinci_pll_init(struct device *dev, struct device_node *node,
const struct davinci_pll_clk_info *info,
const struct davinci_pll_obsclk_info *obsclk_info,
const struct davinci_pll_sysclk_info **div_info,
u8 max_sysclk_id,
- void __iomem *base)
+ void __iomem *base,
+ struct regmap *cfgchip)
{
- struct device_node *node = dev->of_node;
struct device_node *child;
const char *parent_name;
struct clk *clk;
@@ -693,7 +759,7 @@ int of_davinci_pll_init(struct device *dev,
else
parent_name = OSCIN_CLK_NAME;
- clk = davinci_pll_clk_register(dev, info, parent_name, base);
+ clk = davinci_pll_clk_register(dev, info, parent_name, base, cfgchip);
if (IS_ERR(clk)) {
dev_err(dev, "failed to register %s\n", info->name);
return PTR_ERR(clk);
@@ -711,11 +777,11 @@ int of_davinci_pll_init(struct device *dev,
int n_clks = max_sysclk_id + 1;
int i;
- clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
- clks = devm_kmalloc_array(dev, n_clks, sizeof(*clks), GFP_KERNEL);
+ clks = kmalloc_array(n_clks, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;
@@ -770,6 +836,27 @@ int of_davinci_pll_init(struct device *dev,
return 0;
}
+static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev)
+{
+ struct davinci_pll_platform_data *pdata = dev_get_platdata(dev);
+
+ /*
+ * Platform data is optional, so allocate a new struct if one was not
+ * provided. For device tree, this will always be the case.
+ */
+ if (!pdata)
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ /* for device tree, we need to fill in the struct */
+ if (dev->of_node)
+ pdata->cfgchip =
+ syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
+
+ return pdata;
+}
+
static const struct of_device_id davinci_pll_of_match[] = {
{ .compatible = "ti,da850-pll0", .data = of_da850_pll0_init },
{ .compatible = "ti,da850-pll1", .data = of_da850_pll1_init },
@@ -791,11 +878,13 @@ static const struct platform_device_id davinci_pll_id_table[] = {
{ }
};
-typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base);
+typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base,
+ struct regmap *cfgchip);
static int davinci_pll_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct davinci_pll_platform_data *pdata;
const struct of_device_id *of_id;
davinci_pll_init pll_init = NULL;
struct resource *res;
@@ -812,12 +901,18 @@ static int davinci_pll_probe(struct platform_device *pdev)
return -EINVAL;
}
+ pdata = davinci_pll_get_pdata(dev);
+ if (!pdata) {
+ dev_err(dev, "missing platform data\n");
+ return -EINVAL;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
- return pll_init(dev, base);
+ return pll_init(dev, base, pdata->cfgchip);
}
static struct platform_driver davinci_pll_driver = {
diff --git a/drivers/clk/davinci/pll.h b/drivers/clk/davinci/pll.h
index b1b6fb23f972..562652fc0759 100644
--- a/drivers/clk/davinci/pll.h
+++ b/drivers/clk/davinci/pll.h
@@ -11,6 +11,7 @@
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
+#include <linux/regmap.h>
#include <linux/types.h>
#define PLL_HAS_CLKMODE BIT(0) /* PLL has PLLCTL[CLKMODE] */
@@ -94,7 +95,8 @@ struct davinci_pll_obsclk_info {
struct clk *davinci_pll_clk_register(struct device *dev,
const struct davinci_pll_clk_info *info,
const char *parent_name,
- void __iomem *base);
+ void __iomem *base,
+ struct regmap *cfgchip);
struct clk *davinci_pll_auxclk_register(struct device *dev,
const char *name,
void __iomem *base);
@@ -110,32 +112,24 @@ davinci_pll_sysclk_register(struct device *dev,
const struct davinci_pll_sysclk_info *info,
void __iomem *base);
-int of_davinci_pll_init(struct device *dev,
+int of_davinci_pll_init(struct device *dev, struct device_node *node,
const struct davinci_pll_clk_info *info,
const struct davinci_pll_obsclk_info *obsclk_info,
const struct davinci_pll_sysclk_info **div_info,
u8 max_sysclk_id,
- void __iomem *base);
+ void __iomem *base,
+ struct regmap *cfgchip);
/* Platform-specific callbacks */
-int da830_pll_init(struct device *dev, void __iomem *base);
+int da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int of_da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
-int da850_pll0_init(struct device *dev, void __iomem *base);
-int da850_pll1_init(struct device *dev, void __iomem *base);
-int of_da850_pll0_init(struct device *dev, void __iomem *base);
-int of_da850_pll1_init(struct device *dev, void __iomem *base);
+int dm355_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
-int dm355_pll1_init(struct device *dev, void __iomem *base);
-int dm355_pll2_init(struct device *dev, void __iomem *base);
+int dm644x_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
-int dm365_pll1_init(struct device *dev, void __iomem *base);
-int dm365_pll2_init(struct device *dev, void __iomem *base);
-
-int dm644x_pll1_init(struct device *dev, void __iomem *base);
-int dm644x_pll2_init(struct device *dev, void __iomem *base);
-
-int dm646x_pll1_init(struct device *dev, void __iomem *base);
-int dm646x_pll2_init(struct device *dev, void __iomem *base);
+int dm646x_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
#endif /* __CLK_DAVINCI_PLL_H___ */
diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h
new file mode 100644
index 000000000000..ebdd9df1c0ef
--- /dev/null
+++ b/include/linux/clk/davinci.h
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock drivers for TI DaVinci PLL and PSC controllers
+ *
+ * Copyright (C) 2018 David Lechner <[email protected]>
+ */
+
+#ifndef __LINUX_CLK_DAVINCI_PLL_H___
+#define __LINUX_CLK_DAVINCI_PLL_H___
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* function for registering clocks in early boot */
+
+int da830_pll_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm355_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm365_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+
+#endif /* __LINUX_CLK_DAVINCI_PLL_H___ */
--
2.17.0
This adds the new board-specific clock init in mach-davinci/dm646x.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL1 and PSC in dm646x_init_time() instead of as platform device so
that we get the correct timer0 clock for davinci_timer_init()
- Fixed size of PLL memory block
v8 changes:
- register clkdev lookup for ref_clk and aux_clkin
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +
arch/arm/mach-davinci/davinci.h | 1 +
arch/arm/mach-davinci/dm646x.c | 63 +++++++++++++++++++++---
3 files changed, 58 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 584064fdabf5..867ab2fa6cfd 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -776,6 +776,8 @@ static __init void evm_init(void)
int ret;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ dm646x_register_clocks();
+
ret = dm646x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 16aca5853ab2..fa99197d36f9 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -116,6 +116,7 @@ int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
+void dm646x_register_clocks(void);
void dm646x_init_mcasp0(struct snd_platform_data *pdata);
void dm646x_init_mcasp1(struct snd_platform_data *pdata);
int dm646x_init_edma(struct edma_rsv_info *rsv);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 280b753702f3..f05090317469 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -8,29 +8,35 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include "psc.h"
#include <mach/mux.h>
-#include <mach/time.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
#define DAVINCI_VPIF_BASE (0x01C12000)
@@ -46,6 +52,7 @@
#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -356,6 +363,7 @@ static struct clk_lookup dm646x_clks[] = {
CLK(NULL, "vpif1", &vpif1_clk),
CLK(NULL, NULL, NULL),
};
+#endif
static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
@@ -954,10 +962,49 @@ void __init dm646x_init(void)
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *psc;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
+ clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
+ dm646x_pll1_init(NULL, pll1, NULL);
+
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+ dm646x_psc_init(NULL, psc);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
ref_clk.rate = ref_clk_rate;
aux_clkin.rate = aux_clkin_rate;
davinci_clk_init(dm646x_clks);
davinci_timer_init(&timer0_clk);
+#endif
+}
+
+static struct resource dm646x_pll2_resources[] = {
+ {
+ .start = DAVINCI_PLL2_BASE,
+ .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm646x_pll2_device = {
+ .name = "dm646x-pll2",
+ .id = -1,
+ .resource = dm646x_pll2_resources,
+ .num_resources = ARRAY_SIZE(dm646x_pll2_resources),
+};
+
+void __init dm646x_register_clocks(void)
+{
+ /* PLL1 and PSC are registered in dm646x_init_time() */
+ platform_device_register(&dm646x_pll2_device);
}
static int __init dm646x_init_devices(void)
--
2.17.0
This removes the unused legacy USB and SATA clock init code from
arch/arm/mach-davinci/{devices,usb}-da8xx}.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/devices-da8xx.c | 29 ---
arch/arm/mach-davinci/include/mach/da8xx.h | 3 -
arch/arm/mach-davinci/usb-da8xx.c | 238 ---------------------
3 files changed, 270 deletions(-)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 73de449bbc68..1fd3619f6a09 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -30,11 +30,6 @@
#include "cpuidle.h"
#include "sram.h"
-#ifndef CONFIG_COMMON_CLK
-#include <mach/clock.h>
-#include "clock.h"
-#endif
-
#define DA8XX_TPCC_BASE 0x01c00000
#define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400
@@ -1045,29 +1040,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
}
#ifdef CONFIG_ARCH_DAVINCI_DA850
-#ifndef CONFIG_COMMON_CLK
-static struct clk sata_refclk = {
- .name = "sata_refclk",
- .set_rate = davinci_simple_set_rate,
-};
-
-static struct clk_lookup sata_refclk_lookup =
- CLK("ahci_da850", "refclk", &sata_refclk);
-
-int __init da850_register_sata_refclk(int rate)
-{
- int ret;
-
- sata_refclk.rate = rate;
- ret = clk_register(&sata_refclk);
- if (ret)
- return ret;
-
- clkdev_add(&sata_refclk_lookup);
-
- return 0;
-}
-#else
int __init da850_register_sata_refclk(int rate)
{
struct clk *clk;
@@ -1078,7 +1050,6 @@ int __init da850_register_sata_refclk(int rate)
return clk_register_clkdev(clk, "refclk", "ahci_da850");
}
-#endif
static struct resource da850_sata_resources[] = {
{
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 5d7b1de9aa7e..ab4a57f433f4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -103,9 +103,6 @@ int da8xx_register_watchdog(void);
int da8xx_register_usb_phy(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
-int da8xx_register_usb_refclkin(int rate);
-int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
-int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index c8d2f3075e69..c17ce66a3d95 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -20,11 +20,6 @@
#include <mach/da8xx.h>
#include <mach/irqs.h>
-#ifndef CONFIG_COMMON_CLK
-#include <mach/clock.h>
-#include "clock.h"
-#endif
-
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
@@ -87,11 +82,6 @@ static struct platform_device da8xx_usb20_dev = {
.name = "musb-da8xx",
.id = -1,
.dev = {
- /*
- * Setting init_name so that clock lookup will work in
- * usb20_phy_clk_enable() even if this device is not registered.
- */
- .init_name = "musb-da8xx",
.platform_data = &usb_data,
.dma_mask = &usb_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -140,234 +130,6 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
-#ifndef CONFIG_COMMON_CLK
-static struct clk usb_refclkin = {
- .name = "usb_refclkin",
- .set_rate = davinci_simple_set_rate,
-};
-
-static struct clk_lookup usb_refclkin_lookup =
- CLK(NULL, "usb_refclkin", &usb_refclkin);
-
-/**
- * da8xx_register_usb_refclkin - register USB_REFCLKIN clock
- *
- * @rate: The clock rate in Hz
- *
- * This clock is only needed if the board provides an external USB_REFCLKIN
- * signal, in which case it will be used as the parent of usb20_phy_clk and/or
- * usb11_phy_clk.
- */
-int __init da8xx_register_usb_refclkin(int rate)
-{
- int ret;
-
- usb_refclkin.rate = rate;
- ret = clk_register(&usb_refclkin);
- if (ret)
- return ret;
-
- clkdev_add(&usb_refclkin_lookup);
-
- return 0;
-}
-
-static void usb20_phy_clk_enable(struct clk *clk)
-{
- u32 val;
- u32 timeout = 500000; /* 500 msec */
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
- davinci_clk_enable(usb20_clk);
-
- /*
- * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
- * host may use the PLL clock without USB 2.0 OTG being used.
- */
- val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
- val |= CFGCHIP2_PHY_PLLON;
-
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- while (--timeout) {
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
- if (val & CFGCHIP2_PHYCLKGD)
- goto done;
- udelay(1);
- }
-
- pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
-done:
- davinci_clk_disable(usb20_clk);
-}
-
-static void usb20_phy_clk_disable(struct clk *clk)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
- val |= CFGCHIP2_PHYPWRDN;
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-}
-
-static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- /* Set the mux depending on the parent clock. */
- if (parent == &usb_refclkin) {
- val &= ~CFGCHIP2_USB2PHYCLKMUX;
- } else if (strcmp(parent->name, "pll0_aux_clk") == 0) {
- val |= CFGCHIP2_USB2PHYCLKMUX;
- } else {
- pr_err("Bad parent on USB 2.0 PHY clock\n");
- return -EINVAL;
- }
-
- /* reference frequency also comes from parent clock */
- val &= ~CFGCHIP2_REFFREQ_MASK;
- switch (clk_get_rate(parent)) {
- case 12000000:
- val |= CFGCHIP2_REFFREQ_12MHZ;
- break;
- case 13000000:
- val |= CFGCHIP2_REFFREQ_13MHZ;
- break;
- case 19200000:
- val |= CFGCHIP2_REFFREQ_19_2MHZ;
- break;
- case 20000000:
- val |= CFGCHIP2_REFFREQ_20MHZ;
- break;
- case 24000000:
- val |= CFGCHIP2_REFFREQ_24MHZ;
- break;
- case 26000000:
- val |= CFGCHIP2_REFFREQ_26MHZ;
- break;
- case 38400000:
- val |= CFGCHIP2_REFFREQ_38_4MHZ;
- break;
- case 40000000:
- val |= CFGCHIP2_REFFREQ_40MHZ;
- break;
- case 48000000:
- val |= CFGCHIP2_REFFREQ_48MHZ;
- break;
- default:
- pr_err("Bad parent clock rate on USB 2.0 PHY clock\n");
- return -EINVAL;
- }
-
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- return 0;
-}
-
-static struct clk usb20_phy_clk = {
- .name = "usb0_clk48",
- .clk_enable = usb20_phy_clk_enable,
- .clk_disable = usb20_phy_clk_disable,
- .set_parent = usb20_phy_clk_set_parent,
-};
-
-static struct clk_lookup usb20_phy_clk_lookup =
- CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk);
-
-/**
- * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
- *
- * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
- * or "pll0_aux" if false.
- */
-int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
-{
- struct clk *parent;
- int ret;
-
- usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
- ret = PTR_ERR_OR_ZERO(usb20_clk);
- if (ret)
- return ret;
-
- parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
- ret = PTR_ERR_OR_ZERO(parent);
- if (ret) {
- clk_put(usb20_clk);
- return ret;
- }
-
- usb20_phy_clk.parent = parent;
- ret = clk_register(&usb20_phy_clk);
- if (!ret)
- clkdev_add(&usb20_phy_clk_lookup);
-
- clk_put(parent);
-
- return ret;
-}
-
-static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- /* Set the USB 1.1 PHY clock mux based on the parent clock. */
- if (parent == &usb20_phy_clk) {
- val &= ~CFGCHIP2_USB1PHYCLKMUX;
- } else if (parent == &usb_refclkin) {
- val |= CFGCHIP2_USB1PHYCLKMUX;
- } else {
- pr_err("Bad parent on USB 1.1 PHY clock\n");
- return -EINVAL;
- }
-
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- return 0;
-}
-
-static struct clk usb11_phy_clk = {
- .name = "usb1_clk48",
- .set_parent = usb11_phy_clk_set_parent,
-};
-
-static struct clk_lookup usb11_phy_clk_lookup =
- CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk);
-
-/**
- * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
- *
- * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
- * or "usb0_clk48" if false.
- */
-int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
-{
- struct clk *parent;
- int ret = 0;
-
- if (use_usb_refclkin)
- parent = clk_get(NULL, "usb_refclkin");
- else
- parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48");
- if (IS_ERR(parent))
- return PTR_ERR(parent);
-
- usb11_phy_clk.parent = parent;
- ret = clk_register(&usb11_phy_clk);
- if (!ret)
- clkdev_add(&usb11_phy_clk_lookup);
-
- clk_put(parent);
-
- return ret;
-}
-#endif
static struct platform_device da8xx_usb_phy_clks_device = {
.name = "da830-usb-phy-clks",
.id = -1,
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm646x.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/dm646x.c | 329 ---------------------------------
1 file changed, 329 deletions(-)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index f05090317469..6bd2ed069d0d 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -33,11 +33,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DAVINCI_VPIF_BASE (0x01C12000)
#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
@@ -52,319 +47,6 @@
#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- /* rate is initialized in dm646x_init_time() */
-};
-
-static struct clk aux_clkin = {
- .name = "aux_clkin",
- /* rate is initialized in dm646x_init_time() */
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .pll_data = &pll1_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll1_sysclk6",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk8 = {
- .name = "pll1_sysclk8",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV8,
-};
-
-static struct clk pll1_sysclk9 = {
- .name = "pll1_sysclk9",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV9,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll2_clk = {
- .name = "pll2_clk",
- .parent = &ref_clk,
- .pll_data = &pll2_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk dsp_clk = {
- .name = "dsp",
- .parent = &pll1_sysclk1,
- .lpsc = DM646X_LPSC_C64X_CPU,
- .usecount = 1, /* REVISIT how to disable? */
-};
-
-static struct clk arm_clk = {
- .name = "arm",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_cc_clk = {
- .name = "edma_cc",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPCC,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc0_clk = {
- .name = "edma_tc0",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC0,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc1_clk = {
- .name = "edma_tc1",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc2_clk = {
- .name = "edma_tc2",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC2,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc3_clk = {
- .name = "edma_tc3",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC3,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
- .name = "I2CCLK",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_I2C,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_GPIO,
-};
-
-static struct clk mcasp0_clk = {
- .name = "mcasp0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_McASP0,
-};
-
-static struct clk mcasp1_clk = {
- .name = "mcasp1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_McASP1,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_AEMIF,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_EMAC,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_PWM0,
- .usecount = 1, /* REVIST: disabling hangs system */
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_PWM1,
- .usecount = 1, /* REVIST: disabling hangs system */
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_sysclk3,
- .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
-};
-
-
-static struct clk ide_clk = {
- .name = "ide",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_ATA,
-};
-
-static struct clk vpif0_clk = {
- .name = "vpif0",
- .parent = &ref_clk,
- .lpsc = DM646X_LPSC_VPSSMSTR,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk vpif1_clk = {
- .name = "vpif1",
- .parent = &ref_clk,
- .lpsc = DM646X_LPSC_VPSSSLV,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk_lookup dm646x_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "aux", &aux_clkin),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
- CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "dsp", &dsp_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "edma_cc", &edma_cc_clk),
- CLK(NULL, "edma_tc0", &edma_tc0_clk),
- CLK(NULL, "edma_tc1", &edma_tc1_clk),
- CLK(NULL, "edma_tc2", &edma_tc2_clk),
- CLK(NULL, "edma_tc3", &edma_tc3_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
- CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK("palm_bk3710", NULL, &ide_clk),
- CLK(NULL, "vpif0", &vpif0_clk),
- CLK(NULL, "vpif1", &vpif1_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-
static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
@@ -804,8 +486,6 @@ static struct davinci_id dm646x_ids[] = {
},
};
-static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
@@ -890,8 +570,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
.jtag_id_reg = 0x01c40028,
.ids = dm646x_ids,
.ids_num = ARRAY_SIZE(dm646x_ids),
- .psc_bases = dm646x_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm646x_pins,
.pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
@@ -962,7 +640,6 @@ void __init dm646x_init(void)
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *psc;
struct clk *clk;
@@ -978,12 +655,6 @@ void __init dm646x_init_time(unsigned long ref_clk_rate,
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- ref_clk.rate = ref_clk_rate;
- aux_clkin.rate = aux_clkin_rate;
- davinci_clk_init(dm646x_clks);
- davinci_timer_init(&timer0_clk);
-#endif
}
static struct resource dm646x_pll2_resources[] = {
--
2.17.0
This adds clock provider nodes for da850 and wires them up to all of the
devices.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- rebased
v10 changes:
- change compatible to "ti,da830-timer" and add interrupt and interrupt-names
properties to new clocksource timer node
v9 changes:
- change mcasp and vpif nodes from clocks to power-domains
v8 changes:
- fix typo in clock-names property of psc0
- added power-domains properties to nodes that define that property in their
device tree bindings
v7 changes:
- move ref_clk frequency to board-specific DT files
- enable sata_refclk in da850-lcdk.dts
- drop async2 fixed factor clock
- add power-domains for devices that use them
- fix USB PHY clock-names property
- move assigned-clocks to PSC device node
- drop clocks property from devices that don't use it (e.g. EDMA)
- add clock to RTC node
- add clock-ranges to usb0 and aemif nodes
- add clock-names property to aemif node
- fix typo in psc1 clock-names
v6 changes:
- updated for device tree bindings changes earlier in this series
- use single async2 clock instead of duplicate fixed factor clocks
- add clock-names property to mdio node
arch/arm/boot/dts/da850-enbw-cmc.dts | 4 +
arch/arm/boot/dts/da850-evm.dts | 4 +
arch/arm/boot/dts/da850-lcdk.dts | 9 ++
arch/arm/boot/dts/da850-lego-ev3.dts | 4 +
arch/arm/boot/dts/da850.dtsi | 168 +++++++++++++++++++++++++++
5 files changed, 189 insertions(+)
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 14dff3e188ed..0102ffc5aa53 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -35,6 +35,10 @@
};
};
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
&edma0 {
ti,edma-reserved-slot-ranges = <32 50>;
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 2e817da37fdb..6e0d84fda034 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -63,6 +63,10 @@
};
};
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
&pmx_core {
status = "okay";
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0edf769ea95c..0177e3ed20fe 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -123,6 +123,10 @@
};
};
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
&pmx_core {
status = "okay";
@@ -175,6 +179,11 @@
status = "okay";
};
+&sata_refclk {
+ status = "okay";
+ clock-frequency = <100000000>;
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index ee3932475ce7..331362a6f01e 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -191,6 +191,10 @@
};
};
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
&pmx_core {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f6f1597b03df..de9a8bea100e 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -32,6 +32,25 @@
reg = <0xfffee000 0x2000>;
};
};
+ clocks: clocks {
+ ref_clk: ref_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref_clk";
+ };
+ sata_refclk: sata_refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sata_refclk";
+ status = "disabled";
+ };
+ usb_refclkin: usb_refclkin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "usb_refclkin";
+ status = "disabled";
+ };
+ };
dsp: dsp@11800000 {
compatible = "ti,da850-dsp";
reg = <0x11800000 0x40000>,
@@ -42,6 +61,7 @@
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
interrupt-parent = <&intc>;
interrupts = <28>;
+ clocks = <&psc0 15>;
status = "disabled";
};
soc@1c00000 {
@@ -52,6 +72,37 @@
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
+ psc0: clock-controller@10000 {
+ compatible = "ti,da850-psc0";
+ reg = <0x10000 0x1000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+ <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+ <&async1_clk>;
+ clock-names = "pll0_sysclk1", "pll0_sysclk2",
+ "pll0_sysclk4", "pll0_sysclk6",
+ "async1";
+ };
+ pll0: clock-controller@11000 {
+ compatible = "ti,da850-pll0";
+ reg = <0x11000 0x1000>;
+ clocks = <&ref_clk>, <&pll1_sysclk 3>;
+ clock-names = "clksrc", "extclksrc";
+
+ pll0_pllout: pllout {
+ #clock-cells = <0>;
+ };
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+ pll0_auxclk: auxclk {
+ #clock-cells = <0>;
+ };
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
@@ -281,8 +332,41 @@
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
#phy-cells = <1>;
+ clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+ clock-names = "usb0_clk48", "usb1_clk48";
status = "disabled";
};
+ usb_phy_clk: usb-phy-clocks {
+ compatible = "ti,da830-usb-phy-clocks";
+ #clock-cells = <1>;
+ clocks = <&psc1 1>, <&usb_refclkin>,
+ <&pll0_auxclk>;
+ clock-names = "fck", "usb_refclkin", "auxclk";
+ };
+ ehrpwm_tbclk: ehrpwm_tbclk {
+ compatible = "ti,da830-tbclksync";
+ #clock-cells = <0>;
+ clocks = <&psc1 17>;
+ clock-names = "fck";
+ };
+ div4p5_clk: div4.5 {
+ compatible = "ti,da830-div4p5ena";
+ #clock-cells = <0>;
+ clocks = <&pll0_pllout>;
+ clock-names = "pll0_pllout";
+ };
+ async1_clk: async1 {
+ compatible = "ti,da850-async1-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+ clock-names = "pll0_sysclk3", "div4.5";
+ };
+ async3_clk: async3 {
+ compatible = "ti,da850-async3-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+ clock-names = "pll0_sysclk2", "pll1_sysclk2";
+ };
};
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
@@ -294,18 +378,21 @@
#dma-cells = <2>;
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+ power-domains = <&psc0 0>;
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc0 2>;
};
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
@@ -317,12 +404,14 @@
#dma-cells = <2>;
ti,tptcs = <&edma1_tptc0 7>;
+ power-domains = <&psc1 0>;
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc1 21>;
};
serial0: serial@42000 {
compatible = "ti,da830-uart", "ns16550a";
@@ -330,6 +419,8 @@
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <25>;
+ clocks = <&psc0 9>;
+ power-domains = <&psc0 9>;
status = "disabled";
};
serial1: serial@10c000 {
@@ -338,6 +429,8 @@
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <53>;
+ clocks = <&psc1 12>;
+ power-domains = <&psc1 12>;
status = "disabled";
};
serial2: serial@10d000 {
@@ -346,6 +439,8 @@
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <61>;
+ clocks = <&psc1 13>;
+ power-domains = <&psc1 13>;
status = "disabled";
};
rtc0: rtc@23000 {
@@ -353,6 +448,8 @@
reg = <0x23000 0x1000>;
interrupts = <19
19>;
+ clocks = <&pll0_auxclk>;
+ clock-names = "int-clk";
status = "disabled";
};
i2c0: i2c@22000 {
@@ -361,6 +458,7 @@
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pll0_auxclk>;
status = "disabled";
};
i2c1: i2c@228000 {
@@ -369,11 +467,21 @@
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&psc1 11>;
+ power-domains = <&psc1 11>;
status = "disabled";
};
+ clocksource: timer@20000 {
+ compatible = "ti,da830-timer";
+ reg = <0x20000 0x1000>;
+ interrupts = <12>, <13>;
+ interrupt-names = "tint12", "tint34";
+ clocks = <&pll0_auxclk>;
+ };
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
+ clocks = <&pll0_auxclk>;
status = "disabled";
};
mmc0: mmc@40000 {
@@ -384,12 +492,14 @@
interrupts = <16>;
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
+ clocks = <&psc0 5>;
status = "disabled";
};
vpif: video@217000 {
compatible = "ti,da850-vpif";
reg = <0x217000 0x1000>;
interrupts = <92>;
+ power-domains = <&psc1 9>;
status = "disabled";
/* VPIF capture port */
@@ -412,6 +522,7 @@
interrupts = <72>;
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
+ clocks = <&psc1 18>;
status = "disabled";
};
ehrpwm0: pwm@300000 {
@@ -419,6 +530,8 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
+ clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ clock-names = "fck", "tbclk";
status = "disabled";
};
ehrpwm1: pwm@302000 {
@@ -426,6 +539,8 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
+ clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ clock-names = "fck", "tbclk";
status = "disabled";
};
ecap0: ecap@306000 {
@@ -433,6 +548,8 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
status = "disabled";
};
ecap1: ecap@307000 {
@@ -440,6 +557,8 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
status = "disabled";
};
ecap2: ecap@308000 {
@@ -447,6 +566,8 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
status = "disabled";
};
spi0: spi@41000 {
@@ -459,6 +580,8 @@
interrupts = <20>;
dmas = <&edma0 14 0>, <&edma0 15 0>;
dma-names = "rx", "tx";
+ clocks = <&psc0 4>;
+ power-domains = <&psc0 4>;
status = "disabled";
};
spi1: spi@30e000 {
@@ -471,6 +594,8 @@
interrupts = <56>;
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
+ clocks = <&psc1 10>;
+ power-domains = <&psc1 10>;
status = "disabled";
};
usb0: usb@200000 {
@@ -482,6 +607,8 @@
dr_mode = "otg";
phys = <&usb_phy 0>;
phy-names = "usb-phy";
+ clocks = <&psc1 1>;
+ clock-ranges;
status = "disabled";
#address-cells = <1>;
@@ -512,13 +639,31 @@
compatible = "ti,da850-ahci";
reg = <0x218000 0x2000>, <0x22c018 0x4>;
interrupts = <67>;
+ clocks = <&psc1 8>, <&sata_refclk>;
+ clock-names = "fck", "refclk";
status = "disabled";
};
+ pll1: clock-controller@21a000 {
+ compatible = "ti,da850-pll1";
+ reg = <0x21a000 0x1000>;
+ clocks = <&ref_clk>;
+ clock-names = "clksrc";
+
+ pll1_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+ pll1_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
+ clocks = <&psc1 5>;
+ clock-names = "fck";
+ power-domains = <&psc1 5>;
status = "disabled";
};
eth0: ethernet@220000 {
@@ -534,6 +679,8 @@
35
36
>;
+ clocks = <&psc1 5>;
+ power-domains = <&psc1 5>;
status = "disabled";
};
usb1: usb@225000 {
@@ -542,6 +689,7 @@
interrupts = <59>;
phys = <&usb_phy 1>;
phy-names = "usb-phy";
+ clocks = <&psc1 2>;
status = "disabled";
};
gpio: gpio@226000 {
@@ -556,6 +704,8 @@
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
+ clocks = <&psc1 3>;
+ clock-names = "gpio";
status = "disabled";
interrupt-controller;
#interrupt-cells = <2>;
@@ -704,6 +854,17 @@
<&pmx_core 142 147 1>,
<&pmx_core 143 146 1>;
};
+ psc1: clock-controller@227000 {
+ compatible = "ti,da850-psc1";
+ reg = <0x227000 0x1000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+ <&async3_clk>;
+ clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+ assigned-clocks = <&async3_clk>;
+ assigned-clock-parents = <&pll1_sysclk 2>;
+ };
pinconf: pin-controller@22c00c {
compatible = "ti,da850-pupd";
reg = <0x22c00c 0x8>;
@@ -717,6 +878,7 @@
reg-names = "mpu", "dat";
interrupts = <54>;
interrupt-names = "common";
+ power-domains = <&psc1 7>;
status = "disabled";
dmas = <&edma0 1 1>,
<&edma0 0 1>;
@@ -728,6 +890,9 @@
reg = <0x213000 0x1000>;
interrupts = <52>;
max-pixelclock = <37500>;
+ clocks = <&psc1 16>;
+ clock-names = "fck";
+ power-domains = <&psc1 16>;
status = "disabled";
};
};
@@ -739,6 +904,9 @@
reg = <0x68000000 0x00008000>;
ranges = <0 0 0x60000000 0x08000000
1 0 0x68000000 0x00008000>;
+ clocks = <&psc0 3>;
+ clock-names = "aemif";
+ clock-ranges;
status = "disabled";
};
memctrl: memory-controller@b0000000 {
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm644x.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/dm644x.c | 300 ---------------------------------
1 file changed, 300 deletions(-)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index c3cd27c6cd70..0720da7809a6 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -32,11 +32,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
/*
* Device specific clocks
*/
@@ -49,292 +44,6 @@
#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- .rate = DM644X_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .pll_data = &pll1_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk pll2_clk = {
- .name = "pll2",
- .parent = &ref_clk,
- .pll_data = &pll2_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclk2 = {
- .name = "pll2_sysclk2",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll2_sysclkbp = {
- .name = "pll2_sysclkbp",
- .parent = &pll2_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk dsp_clk = {
- .name = "dsp",
- .parent = &pll1_sysclk1,
- .lpsc = DAVINCI_LPSC_GEM,
- .domain = DAVINCI_GPSC_DSPDOMAIN,
- .usecount = 1, /* REVISIT how to disable? */
-};
-
-static struct clk arm_clk = {
- .name = "arm",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk vicp_clk = {
- .name = "vicp",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_IMCOP,
- .domain = DAVINCI_GPSC_DSPDOMAIN,
- .usecount = 1, /* REVISIT how to disable? */
-};
-
-static struct clk vpss_master_clk = {
- .name = "vpss_master",
- .parent = &pll1_sysclk3,
- .lpsc = DAVINCI_LPSC_VPSSMSTR,
- .flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
- .name = "vpss_slave",
- .parent = &pll1_sysclk3,
- .lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART2,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
-};
-
-static struct clk i2c_clk = {
- .name = "i2c",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk ide_clk = {
- .name = "ide",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_ATA,
-};
-
-static struct clk asp_clk = {
- .name = "asp0",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_McBSP,
-};
-
-static struct clk mmcsd_clk = {
- .name = "mmcsd",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk spi_clk = {
- .name = "spi",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk usb_clk = {
- .name = "usb",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk vlynq_clk = {
- .name = "vlynq",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_VLYNQ,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
- .name = "pwm2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why can't this be disabled? */
-};
-
-static struct clk_lookup dm644x_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
- CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
- CLK(NULL, "dsp", &dsp_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "vicp", &vicp_clk),
- CLK("vpss", "master", &vpss_master_clk),
- CLK("vpss", "slave", &vpss_slave_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("palm_bk3710", NULL, &ide_clk),
- CLK("davinci-mcbsp", NULL, &asp_clk),
- CLK("dm6441-mmc.0", NULL, &mmcsd_clk),
- CLK(NULL, "spi", &spi_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK(NULL, "usb", &usb_clk),
- CLK(NULL, "vlynq", &vlynq_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "pwm2", &pwm2_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-
static struct emac_platform_data dm644x_emac_pdata = {
.ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
@@ -827,8 +536,6 @@ static struct davinci_id dm644x_ids[] = {
},
};
-static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
@@ -913,8 +620,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = {
.jtag_id_reg = 0x01c40028,
.ids = dm644x_ids,
.ids_num = ARRAY_SIZE(dm644x_ids),
- .psc_bases = dm644x_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm644x_pins,
.pinmux_pins_num = ARRAY_SIZE(dm644x_pins),
@@ -942,7 +647,6 @@ void __init dm644x_init(void)
void __init dm644x_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *psc;
struct clk *clk;
@@ -957,10 +661,6 @@ void __init dm644x_init_time(void)
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- davinci_clk_init(dm644x_clks);
- davinci_timer_init(&timer0_clk);
-#endif
}
static struct resource dm644x_pll2_resources[] = {
--
2.17.0
This removes all of the clock init code from da8xx-dt.c. This includes
all of the OF_DEV_AUXDATA that was just used for looking up clocks.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- removed unused header files
- removed arch/arm/mach-davinci/time.c changes accidentally introduced in v9
v9 changes:
- changes to arch/arm/mach-davinci/time.c accidentally got squashed into this
commit. will drop this later.
v8 changes:
- none
v7 changes:
- rebased
- drop of_platform_default_populate(NULL, NULL, NULL)
- add change in pm_domain.c
v6 changes:
- removed misleading statement from commit message
arch/arm/mach-davinci/da8xx-dt.c | 64 -------------------------------
arch/arm/mach-davinci/pm_domain.c | 5 +++
2 files changed, 5 insertions(+), 64 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 088bc5c0318b..beac80ec4037 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -7,79 +7,16 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/irqdomain.h>
-#include <linux/platform_data/ti-aemif.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include "cp_intc.h"
#include <mach/da8xx.h>
-static struct of_dev_auxdata da850_aemif_auxdata_lookup[] = {
- OF_DEV_AUXDATA("ti,davinci-nand", 0x62000000, "davinci-nand.0", NULL),
- {}
-};
-
-static struct aemif_platform_data aemif_data = {
- .dev_lookup = da850_aemif_auxdata_lookup,
-};
-
-static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
- OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
- OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
- OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
- OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm.0", NULL),
- OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm.1", NULL),
- OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap.0", NULL),
- OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap.1", NULL),
- OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap.2", NULL),
- OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL),
- OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
- OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
- OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
- OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
- OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
- OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
- NULL),
- OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
- OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", &aemif_data),
- OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL),
- OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL),
- OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
- OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
- OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
- OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL),
- OF_DEV_AUXDATA("ti,da850-dsp", 0x11800000, "davinci-rproc.0", NULL),
- {}
-};
-
#ifdef CONFIG_ARCH_DAVINCI_DA850
static void __init da850_init_machine(void)
{
- /* All existing boards use 100MHz SATA refclkpn */
- static const unsigned long sata_refclkpn = 100 * 1000 * 1000;
-
- int ret;
-
- da850_register_clocks();
-
- ret = da8xx_register_usb_phy_clocks();
- if (ret)
- pr_warn("%s: USB PHY CLK registration failed: %d\n",
- __func__, ret);
-
- ret = da850_register_sata_refclk(sata_refclkpn);
- if (ret)
- pr_warn("%s: registering SATA REFCLK failed: %d",
- __func__, ret);
-
- of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
davinci_pm_init();
pdata_quirks_init();
}
@@ -94,7 +31,6 @@ static const char *const da850_boards_compat[] __initconst = {
DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
.map_io = da850_init,
- .init_time = da850_init_time,
.init_machine = da850_init_machine,
.dt_compat = da850_boards_compat,
.init_late = davinci_init_late,
diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c
index 78eac2c0c146..e251fd593bfd 100644
--- a/arch/arm/mach-davinci/pm_domain.c
+++ b/arch/arm/mach-davinci/pm_domain.c
@@ -13,6 +13,7 @@
#include <linux/pm_runtime.h>
#include <linux/pm_clock.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
static struct dev_pm_domain davinci_pm_domain = {
.ops = {
@@ -28,6 +29,10 @@ static struct pm_clk_notifier_block platform_bus_notifier = {
static int __init davinci_pm_runtime_init(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
+ /* Use pm_clk as fallback if we're not using genpd. */
pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
--
2.17.0
This removes the unused legacy clock code from arch/arm/mach-davinci/.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/clock.c | 745 --------------------
arch/arm/mach-davinci/clock.h | 72 --
arch/arm/mach-davinci/common.c | 2 -
arch/arm/mach-davinci/devices.c | 1 -
arch/arm/mach-davinci/include/mach/clock.h | 3 -
arch/arm/mach-davinci/include/mach/common.h | 2 -
arch/arm/mach-davinci/psc.c | 137 ----
arch/arm/mach-davinci/psc.h | 10 -
arch/arm/mach-davinci/time.c | 2 -
9 files changed, 974 deletions(-)
delete mode 100644 arch/arm/mach-davinci/clock.c
delete mode 100644 arch/arm/mach-davinci/psc.c
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
deleted file mode 100644
index f77a4f766050..000000000000
--- a/arch/arm/mach-davinci/clock.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * Clock and PLL control for DaVinci devices
- *
- * Copyright (C) 2006-2007 Texas Instruments.
- * Copyright (C) 2008-2009 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-
-#include <mach/clock.h>
-#include "psc.h"
-#include <mach/cputype.h>
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-void davinci_clk_enable(struct clk *clk)
-{
- if (clk->parent)
- davinci_clk_enable(clk->parent);
- if (clk->usecount++ == 0) {
- if (clk->flags & CLK_PSC)
- davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
- true, clk->flags);
- else if (clk->clk_enable)
- clk->clk_enable(clk);
- }
-}
-
-void davinci_clk_disable(struct clk *clk)
-{
- if (WARN_ON(clk->usecount == 0))
- return;
- if (--clk->usecount == 0) {
- if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC))
- davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
- false, clk->flags);
- else if (clk->clk_disable)
- clk->clk_disable(clk);
- }
- if (clk->parent)
- davinci_clk_disable(clk->parent);
-}
-
-int davinci_clk_reset(struct clk *clk, bool reset)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->flags & CLK_PSC)
- davinci_psc_reset(clk->gpsc, clk->lpsc, reset);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(davinci_clk_reset);
-
-int davinci_clk_reset_assert(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->reset)
- return -EINVAL;
-
- return clk->reset(clk, true);
-}
-EXPORT_SYMBOL(davinci_clk_reset_assert);
-
-int davinci_clk_reset_deassert(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->reset)
- return -EINVAL;
-
- return clk->reset(clk, false);
-}
-EXPORT_SYMBOL(davinci_clk_reset_deassert);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- if (!clk)
- return 0;
- else if (IS_ERR(clk))
- return -EINVAL;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- davinci_clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- davinci_clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- if (clk->round_rate)
- return clk->round_rate(clk, rate);
-
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Propagate rate to children */
-static void propagate_rate(struct clk *root)
-{
- struct clk *clk;
-
- list_for_each_entry(clk, &root->children, childnode) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
- propagate_rate(clk);
- }
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!clk)
- return 0;
- else if (IS_ERR(clk))
- return -EINVAL;
-
- if (clk->set_rate)
- ret = clk->set_rate(clk, rate);
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (ret == 0) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
- propagate_rate(clk);
- }
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
-
- if (!clk)
- return 0;
- else if (IS_ERR(clk))
- return -EINVAL;
-
- /* Cannot change parent on enabled clock */
- if (WARN_ON(clk->usecount))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- if (clk->set_parent) {
- int ret = clk->set_parent(clk, parent);
-
- if (ret) {
- mutex_unlock(&clocks_mutex);
- return ret;
- }
- }
- clk->parent = parent;
- list_del_init(&clk->childnode);
- list_add(&clk->childnode, &clk->parent->children);
- mutex_unlock(&clocks_mutex);
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
- propagate_rate(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (WARN(clk->parent && !clk->parent->rate,
- "CLK: %s parent %s has no rate!\n",
- clk->name, clk->parent->name))
- return -EINVAL;
-
- INIT_LIST_HEAD(&clk->children);
-
- mutex_lock(&clocks_mutex);
- list_add_tail(&clk->node, &clocks);
- if (clk->parent) {
- if (clk->set_parent) {
- int ret = clk->set_parent(clk, clk->parent);
-
- if (ret) {
- mutex_unlock(&clocks_mutex);
- return ret;
- }
- }
- list_add_tail(&clk->childnode, &clk->parent->children);
- }
- mutex_unlock(&clocks_mutex);
-
- /* If rate is already set, use it */
- if (clk->rate)
- return 0;
-
- /* Else, see if there is a way to calculate it */
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
-
- /* Otherwise, default to parent rate */
- else if (clk->parent)
- clk->rate = clk->parent->rate;
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->node);
- list_del(&clk->childnode);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_DAVINCI_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-int __init davinci_clk_disable_unused(void)
-{
- struct clk *ck;
-
- spin_lock_irq(&clockfw_lock);
- list_for_each_entry(ck, &clocks, node) {
- if (ck->usecount > 0)
- continue;
- if (!(ck->flags & CLK_PSC))
- continue;
-
- /* ignore if in Disabled or SwRstDisable states */
- if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
- continue;
-
- pr_debug("Clocks: disable unused %s\n", ck->name);
-
- davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc,
- false, ck->flags);
- }
- spin_unlock_irq(&clockfw_lock);
-
- return 0;
-}
-#endif
-
-static unsigned long clk_sysclk_recalc(struct clk *clk)
-{
- u32 v, plldiv;
- struct pll_data *pll;
- unsigned long rate = clk->rate;
-
- /* If this is the PLL base clock, no more calculations needed */
- if (clk->pll_data)
- return rate;
-
- if (WARN_ON(!clk->parent))
- return rate;
-
- rate = clk->parent->rate;
-
- /* Otherwise, the parent must be a PLL */
- if (WARN_ON(!clk->parent->pll_data))
- return rate;
-
- pll = clk->parent->pll_data;
-
- /* If pre-PLL, source clock is before the multiplier and divider(s) */
- if (clk->flags & PRE_PLL)
- rate = pll->input_rate;
-
- if (!clk->div_reg)
- return rate;
-
- v = __raw_readl(pll->base + clk->div_reg);
- if (v & PLLDIV_EN) {
- plldiv = (v & pll->div_ratio_mask) + 1;
- if (plldiv)
- rate /= plldiv;
- }
-
- return rate;
-}
-
-int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
-{
- unsigned v;
- struct pll_data *pll;
- unsigned long input;
- unsigned ratio = 0;
-
- /* If this is the PLL base clock, wrong function to call */
- if (clk->pll_data)
- return -EINVAL;
-
- /* There must be a parent... */
- if (WARN_ON(!clk->parent))
- return -EINVAL;
-
- /* ... the parent must be a PLL... */
- if (WARN_ON(!clk->parent->pll_data))
- return -EINVAL;
-
- /* ... and this clock must have a divider. */
- if (WARN_ON(!clk->div_reg))
- return -EINVAL;
-
- pll = clk->parent->pll_data;
-
- input = clk->parent->rate;
-
- /* If pre-PLL, source clock is before the multiplier and divider(s) */
- if (clk->flags & PRE_PLL)
- input = pll->input_rate;
-
- if (input > rate) {
- /*
- * Can afford to provide an output little higher than requested
- * only if maximum rate supported by hardware on this sysclk
- * is known.
- */
- if (clk->maxrate) {
- ratio = DIV_ROUND_CLOSEST(input, rate);
- if (input / ratio > clk->maxrate)
- ratio = 0;
- }
-
- if (ratio == 0)
- ratio = DIV_ROUND_UP(input, rate);
-
- ratio--;
- }
-
- if (ratio > pll->div_ratio_mask)
- return -EINVAL;
-
- do {
- v = __raw_readl(pll->base + PLLSTAT);
- } while (v & PLLSTAT_GOSTAT);
-
- v = __raw_readl(pll->base + clk->div_reg);
- v &= ~pll->div_ratio_mask;
- v |= ratio | PLLDIV_EN;
- __raw_writel(v, pll->base + clk->div_reg);
-
- v = __raw_readl(pll->base + PLLCMD);
- v |= PLLCMD_GOSET;
- __raw_writel(v, pll->base + PLLCMD);
-
- do {
- v = __raw_readl(pll->base + PLLSTAT);
- } while (v & PLLSTAT_GOSTAT);
-
- return 0;
-}
-EXPORT_SYMBOL(davinci_set_sysclk_rate);
-
-static unsigned long clk_leafclk_recalc(struct clk *clk)
-{
- if (WARN_ON(!clk->parent))
- return clk->rate;
-
- return clk->parent->rate;
-}
-
-int davinci_simple_set_rate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-
-static unsigned long clk_pllclk_recalc(struct clk *clk)
-{
- u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
- u8 bypass;
- struct pll_data *pll = clk->pll_data;
- unsigned long rate = clk->rate;
-
- ctrl = __raw_readl(pll->base + PLLCTL);
- rate = pll->input_rate = clk->parent->rate;
-
- if (ctrl & PLLCTL_PLLEN) {
- bypass = 0;
- mult = __raw_readl(pll->base + PLLM);
- if (cpu_is_davinci_dm365())
- mult = 2 * (mult & PLLM_PLLM_MASK);
- else
- mult = (mult & PLLM_PLLM_MASK) + 1;
- } else
- bypass = 1;
-
- if (pll->flags & PLL_HAS_PREDIV) {
- prediv = __raw_readl(pll->base + PREDIV);
- if (prediv & PLLDIV_EN)
- prediv = (prediv & pll->div_ratio_mask) + 1;
- else
- prediv = 1;
- }
-
- /* pre-divider is fixed, but (some?) chips won't report that */
- if (cpu_is_davinci_dm355() && pll->num == 1)
- prediv = 8;
-
- if (pll->flags & PLL_HAS_POSTDIV) {
- postdiv = __raw_readl(pll->base + POSTDIV);
- if (postdiv & PLLDIV_EN)
- postdiv = (postdiv & pll->div_ratio_mask) + 1;
- else
- postdiv = 1;
- }
-
- if (!bypass) {
- rate /= prediv;
- rate *= mult;
- rate /= postdiv;
- }
-
- pr_debug("PLL%d: input = %lu MHz [ ",
- pll->num, clk->parent->rate / 1000000);
- if (bypass)
- pr_debug("bypass ");
- if (prediv > 1)
- pr_debug("/ %d ", prediv);
- if (mult > 1)
- pr_debug("* %d ", mult);
- if (postdiv > 1)
- pr_debug("/ %d ", postdiv);
- pr_debug("] --> %lu MHz output.\n", rate / 1000000);
-
- return rate;
-}
-
-/**
- * davinci_set_pllrate - set the output rate of a given PLL.
- *
- * Note: Currently tested to work with OMAP-L138 only.
- *
- * @pll: pll whose rate needs to be changed.
- * @prediv: The pre divider value. Passing 0 disables the pre-divider.
- * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
- * @postdiv: The post divider value. Passing 0 disables the post-divider.
- */
-int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
- unsigned int mult, unsigned int postdiv)
-{
- u32 ctrl;
- unsigned int locktime;
- unsigned long flags;
-
- if (pll->base == NULL)
- return -EINVAL;
-
- /*
- * PLL lock time required per OMAP-L138 datasheet is
- * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
- * as 4 and OSCIN cycle as 25 MHz.
- */
- if (prediv) {
- locktime = ((2000 * prediv) / 100);
- prediv = (prediv - 1) | PLLDIV_EN;
- } else {
- locktime = PLL_LOCK_TIME;
- }
- if (postdiv)
- postdiv = (postdiv - 1) | PLLDIV_EN;
- if (mult)
- mult = mult - 1;
-
- /* Protect against simultaneous calls to PLL setting seqeunce */
- spin_lock_irqsave(&clockfw_lock, flags);
-
- ctrl = __raw_readl(pll->base + PLLCTL);
-
- /* Switch the PLL to bypass mode */
- ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
- __raw_writel(ctrl, pll->base + PLLCTL);
-
- udelay(PLL_BYPASS_TIME);
-
- /* Reset and enable PLL */
- ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
- __raw_writel(ctrl, pll->base + PLLCTL);
-
- if (pll->flags & PLL_HAS_PREDIV)
- __raw_writel(prediv, pll->base + PREDIV);
-
- __raw_writel(mult, pll->base + PLLM);
-
- if (pll->flags & PLL_HAS_POSTDIV)
- __raw_writel(postdiv, pll->base + POSTDIV);
-
- udelay(PLL_RESET_TIME);
-
- /* Bring PLL out of reset */
- ctrl |= PLLCTL_PLLRST;
- __raw_writel(ctrl, pll->base + PLLCTL);
-
- udelay(locktime);
-
- /* Remove PLL from bypass mode */
- ctrl |= PLLCTL_PLLEN;
- __raw_writel(ctrl, pll->base + PLLCTL);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(davinci_set_pllrate);
-
-/**
- * davinci_set_refclk_rate() - Set the reference clock rate
- * @rate: The new rate.
- *
- * Sets the reference clock rate to a given value. This will most likely
- * result in the entire clock tree getting updated.
- *
- * This is used to support boards which use a reference clock different
- * than that used by default in <soc>.c file. The reference clock rate
- * should be updated early in the boot process; ideally soon after the
- * clock tree has been initialized once with the default reference clock
- * rate (davinci_clk_init()).
- *
- * Returns 0 on success, error otherwise.
- */
-int davinci_set_refclk_rate(unsigned long rate)
-{
- struct clk *refclk;
-
- refclk = clk_get(NULL, "ref");
- if (IS_ERR(refclk)) {
- pr_err("%s: failed to get reference clock\n", __func__);
- return PTR_ERR(refclk);
- }
-
- clk_set_rate(refclk, rate);
-
- clk_put(refclk);
-
- return 0;
-}
-
-int __init davinci_clk_init(struct clk_lookup *clocks)
-{
- struct clk_lookup *c;
- struct clk *clk;
- size_t num_clocks = 0;
-
- for (c = clocks; c->clk; c++) {
- clk = c->clk;
-
- if (!clk->recalc) {
-
- /* Check if clock is a PLL */
- if (clk->pll_data)
- clk->recalc = clk_pllclk_recalc;
-
- /* Else, if it is a PLL-derived clock */
- else if (clk->flags & CLK_PLL)
- clk->recalc = clk_sysclk_recalc;
-
- /* Otherwise, it is a leaf clock (PSC clock) */
- else if (clk->parent)
- clk->recalc = clk_leafclk_recalc;
- }
-
- if (clk->pll_data) {
- struct pll_data *pll = clk->pll_data;
-
- if (!pll->div_ratio_mask)
- pll->div_ratio_mask = PLLDIV_RATIO_MASK;
-
- if (pll->phys_base && !pll->base) {
- pll->base = ioremap(pll->phys_base, SZ_4K);
- WARN_ON(!pll->base);
- }
- }
-
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
-
- if (clk->lpsc)
- clk->flags |= CLK_PSC;
-
- if (clk->flags & PSC_LRST)
- clk->reset = davinci_clk_reset;
-
- clk_register(clk);
- num_clocks++;
-
- /* Turn on clocks that Linux doesn't otherwise manage */
- if (clk->flags & ALWAYS_ENABLED)
- clk_enable(clk);
- }
-
- clkdev_add_table(clocks, num_clocks);
-
- return 0;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#define CLKNAME_MAX 10 /* longest clock name */
-#define NEST_DELTA 2
-#define NEST_MAX 4
-
-static void
-dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
-{
- char *state;
- char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
- struct clk *clk;
- unsigned i;
-
- if (parent->flags & CLK_PLL)
- state = "pll";
- else if (parent->flags & CLK_PSC)
- state = "psc";
- else
- state = "";
-
- /* <nest spaces> name <pad to end> */
- memset(buf, ' ', sizeof(buf) - 1);
- buf[sizeof(buf) - 1] = 0;
- i = strlen(parent->name);
- memcpy(buf + nest, parent->name,
- min(i, (unsigned)(sizeof(buf) - 1 - nest)));
-
- seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
- buf, parent->usecount, state, clk_get_rate(parent));
- /* REVISIT show device associations too */
-
- /* cost is now small, but not linear... */
- list_for_each_entry(clk, &parent->children, childnode) {
- dump_clock(s, nest + NEST_DELTA, clk);
- }
-}
-
-static int davinci_ck_show(struct seq_file *m, void *v)
-{
- struct clk *clk;
-
- /*
- * Show clock tree; We trust nonzero usecounts equate to PSC enables...
- */
- mutex_lock(&clocks_mutex);
- list_for_each_entry(clk, &clocks, node)
- if (!clk->parent)
- dump_clock(m, 0, clk);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-static int davinci_ck_open(struct inode *inode, struct file *file)
-{
- return single_open(file, davinci_ck_show, NULL);
-}
-
-static const struct file_operations davinci_ck_operations = {
- .open = davinci_ck_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init davinci_clk_debugfs_init(void)
-{
- debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL,
- &davinci_ck_operations);
- return 0;
-
-}
-device_initcall(davinci_clk_debugfs_init);
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 2d058568e004..307383472400 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -61,76 +61,4 @@
*/
#define PLL_LOCK_TIME 20
-#ifndef __ASSEMBLER__
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-
-#define PLLSTAT_GOSTAT BIT(0)
-#define PLLCMD_GOSET BIT(0)
-
-struct pll_data {
- u32 phys_base;
- void __iomem *base;
- u32 num;
- u32 flags;
- u32 input_rate;
- u32 div_ratio_mask;
-};
-#define PLL_HAS_PREDIV 0x01
-#define PLL_HAS_POSTDIV 0x02
-
-struct clk {
- struct list_head node;
- struct module *owner;
- const char *name;
- unsigned long rate;
- unsigned long maxrate; /* H/W supported max rate */
- u8 usecount;
- u8 lpsc;
- u8 gpsc;
- u8 domain;
- u32 flags;
- struct clk *parent;
- struct list_head children; /* list of children */
- struct list_head childnode; /* parent's child list node */
- struct pll_data *pll_data;
- u32 div_reg;
- unsigned long (*recalc) (struct clk *);
- int (*set_rate) (struct clk *clk, unsigned long rate);
- int (*round_rate) (struct clk *clk, unsigned long rate);
- int (*reset) (struct clk *clk, bool reset);
- void (*clk_enable) (struct clk *clk);
- void (*clk_disable) (struct clk *clk);
- int (*set_parent) (struct clk *clk, struct clk *parent);
-};
-
-/* Clock flags: SoC-specific flags start at BIT(16) */
-#define ALWAYS_ENABLED BIT(1)
-#define CLK_PSC BIT(2)
-#define CLK_PLL BIT(3) /* PLL-derived clock */
-#define PRE_PLL BIT(4) /* source is before PLL mult/div */
-#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
-#define PSC_FORCE BIT(6) /* Force module state transtition */
-#define PSC_LRST BIT(8) /* Use local reset on enable/disable */
-
-#define CLK(dev, con, ck) \
- { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- } \
-
-int davinci_clk_init(struct clk_lookup *clocks);
-int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
- unsigned int mult, unsigned int postdiv);
-int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
-int davinci_set_refclk_rate(unsigned long rate);
-int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
-int davinci_clk_reset(struct clk *clk, bool reset);
-void davinci_clk_enable(struct clk *clk);
-void davinci_clk_disable(struct clk *clk);
-
-#endif
-
#endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index e03f95ccd95c..e1d0f0d841ff 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -20,8 +20,6 @@
#include <mach/common.h>
#include <mach/cputype.h>
-#include "clock.h"
-
struct davinci_soc_info davinci_soc_info;
EXPORT_SYMBOL(davinci_soc_info);
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 0edda4093e47..e8dbbb7479ab 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -26,7 +26,6 @@
#include "davinci.h"
-#include "clock.h"
#define DAVINCI_I2C_BASE 0x01C21000
#define DAVINCI_ATA_BASE 0x01C66000
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
index 3e8af6a0b64c..42ed4f2f5ce4 100644
--- a/arch/arm/mach-davinci/include/mach/clock.h
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -15,9 +15,6 @@
struct clk;
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-
int davinci_clk_reset_assert(struct clk *c);
int davinci_clk_reset_deassert(struct clk *c);
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index ded8f5f42725..b577e13a9c23 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -54,8 +54,6 @@ struct davinci_soc_info {
u32 jtag_id_reg;
struct davinci_id *ids;
unsigned long ids_num;
- u32 *psc_bases;
- unsigned long psc_bases_num;
u32 pinmux_base;
const struct mux_config *pinmux_pins;
unsigned long pinmux_pins_num;
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
deleted file mode 100644
index e5dc6bfde5f3..000000000000
--- a/arch/arm/mach-davinci/psc.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * TI DaVinci Power and Sleep Controller (PSC)
- *
- * Copyright (C) 2006 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/cputype.h>
-#include "psc.h"
-
-#include "clock.h"
-
-/* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
-{
- void __iomem *psc_base;
- u32 mdstat;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
- pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
- (int)soc_info->psc_bases, ctlr);
- return 0;
- }
-
- psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
- mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
- iounmap(psc_base);
-
- /* if clocked, state can be "Enable" or "SyncReset" */
- return mdstat & BIT(12);
-}
-
-/* Control "reset" line associated with PSC domain */
-void davinci_psc_reset(unsigned int ctlr, unsigned int id, bool reset)
-{
- u32 mdctl;
- void __iomem *psc_base;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
- pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
- (int)soc_info->psc_bases, ctlr);
- return;
- }
-
- psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
-
- mdctl = readl(psc_base + MDCTL + 4 * id);
- if (reset)
- mdctl &= ~MDCTL_LRST;
- else
- mdctl |= MDCTL_LRST;
- writel(mdctl, psc_base + MDCTL + 4 * id);
-
- iounmap(psc_base);
-}
-
-/* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, bool enable, u32 flags)
-{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
- void __iomem *psc_base;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- u32 next_state = PSC_STATE_ENABLE;
-
- if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
- pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
- (int)soc_info->psc_bases, ctlr);
- return;
- }
-
- psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
-
- if (!enable) {
- if (flags & PSC_SWRSTDISABLE)
- next_state = PSC_STATE_SWRSTDISABLE;
- else
- next_state = PSC_STATE_DISABLE;
- }
-
- mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
- mdctl &= ~MDSTAT_STATE_MASK;
- mdctl |= next_state;
- if (flags & PSC_FORCE)
- mdctl |= MDCTL_FORCE;
- __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
-
- pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
- if ((pdstat & PDSTAT_STATE_MASK) == 0) {
- pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
- pdctl |= PDCTL_NEXT;
- __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
-
- ptcmd = 1 << domain;
- __raw_writel(ptcmd, psc_base + PTCMD);
-
- do {
- epcpr = __raw_readl(psc_base + EPCPR);
- } while ((((epcpr >> domain) & 1) == 0));
-
- pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
- pdctl |= PDCTL_EPCGOOD;
- __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
- } else {
- ptcmd = 1 << domain;
- __raw_writel(ptcmd, psc_base + PTCMD);
- }
-
- do {
- ptstat = __raw_readl(psc_base + PTSTAT);
- } while (!(((ptstat >> domain) & 1) == 0));
-
- do {
- mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
- } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
-
- iounmap(psc_base);
-}
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index b58707cf7033..68cd9d3fc82b 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -204,14 +204,4 @@
#define PDCTL_NEXT BIT(0)
#define PDCTL_EPCGOOD BIT(8)
-#ifndef __ASSEMBLER__
-
-extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
-extern void davinci_psc_reset(unsigned int ctlr, unsigned int id,
- bool reset);
-extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, bool enable, u32 flags);
-
-#endif
-
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 486896f309c5..7ea3db0ff062 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -27,8 +27,6 @@
#include <mach/hardware.h>
#include <mach/time.h>
-#include "clock.h"
-
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
--
2.17.0
This adds new device tree bindings for the timer IP block of TI
DaVinci-like SoCs.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- remove trailing whitespace
v10 changes:
- changed compatible to "ti,da830-timer"
- added interrupts and interrupt-names properties
- fixed grammatical error
v9 changes:
- new patch in v9
.../bindings/timer/ti,davinci-timer.txt | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 000000000000..29bf91ccf5b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+ "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+ "cmpint7" ("cmpintX" may be omitted if not present in the
+ hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+ clocksource: timer@20000 {
+ compatible = "ti,da830-timer";
+ reg = <0x20000 0x1000>;
+ interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+ <80>, <81>;
+ interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+ "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+ "cmpint6", "cmpint7";
+ clocks = <&pll0_auxclk>;
+ };
--
2.17.0
This adds device tree support to the davinci timer so that when clocks
are moved to device tree, the timer will still work.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- drop fallback to ref_clk
v10 changes:
- change compatible to "ti,da830-timer"
- remove comment clocks as platform devices
v9 changes:
- none (there were supposed to be changed, but apparently they got squashed
into the next commit - will fix on the next round)
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/Kconfig | 1 +
arch/arm/mach-davinci/time.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index ba9912b4dfab..da8a039d65f9 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -59,6 +59,7 @@ config MACH_DA8XX_DT
default y
depends on ARCH_DAVINCI_DA850
select PINCTRL
+ select TIMER_OF
help
Say y here to include support for TI DaVinci DA850 based using
Flattened Device Tree. More information at Documentation/devicetree
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 7ea3db0ff062..5a6de5368ab0 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/sched_clock.h>
@@ -397,3 +398,17 @@ void __init davinci_timer_init(struct clk *timer_clk)
for (i=0; i< ARRAY_SIZE(timers); i++)
timer32_config(&timers[i]);
}
+
+static int __init of_davinci_timer_init(struct device_node *np)
+{
+ struct clk *clk;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ davinci_timer_init(clk);
+
+ return 0;
+}
+TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_init);
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm355.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/dm355.c | 357 ----------------------------------
1 file changed, 357 deletions(-)
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 14014b942e8a..9f7d38d12c88 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -35,11 +35,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
#define DM355_OSD_BASE (IO_PHYS + 0x70200)
#define DM355_VENC_BASE (IO_PHYS + 0x70400)
@@ -49,349 +44,6 @@
*/
#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
- .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
- .flags = PLL_HAS_PREDIV,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- /* FIXME -- crystal rate is board-specific */
- .rate = DM355_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll1_data,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk vpss_dac_clk = {
- .name = "vpss_dac",
- .parent = &pll1_sysclk3,
- .lpsc = DM355_LPSC_VPSS_DAC,
-};
-
-static struct clk vpss_master_clk = {
- .name = "vpss_master",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_VPSSMSTR,
- .flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
- .name = "vpss_slave",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk clkout1_clk = {
- .name = "clkout1",
- .parent = &pll1_aux_clk,
- /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
-};
-
-static struct clk clkout2_clk = {
- .name = "clkout2",
- .parent = &pll1_sysclkbp,
-};
-
-static struct clk pll2_clk = {
- .name = "pll2",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll2_data,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclkbp = {
- .name = "pll2_sysclkbp",
- .parent = &pll2_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk clkout3_clk = {
- .name = "clkout3",
- .parent = &pll2_sysclkbp,
- /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
-};
-
-static struct clk arm_clk = {
- .name = "arm_clk",
- .parent = &pll1_sysclk1,
- .lpsc = DAVINCI_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-/*
- * NOT LISTED below, and not touched by Linux
- * - in SyncReset state by default
- * .lpsc = DAVINCI_LPSC_TPCC,
- * .lpsc = DAVINCI_LPSC_TPTC0,
- * .lpsc = DAVINCI_LPSC_TPTC1,
- * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
- * .lpsc = DAVINCI_LPSC_MEMSTICK,
- * - in Enabled state by default
- * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
- * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
- * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
- * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
- * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
- * .lpsc = DAVINCI_LPSC_CFG27, // "test"
- * .lpsc = DAVINCI_LPSC_CFG3, // "test"
- * .lpsc = DAVINCI_LPSC_CFG5, // "test"
- */
-
-static struct clk mjcp_clk = {
- .name = "mjcp",
- .parent = &pll1_sysclk1,
- .lpsc = DAVINCI_LPSC_IMCOP,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
- .name = "i2c",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk asp0_clk = {
- .name = "asp0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_McBSP,
-};
-
-static struct clk asp1_clk = {
- .name = "asp1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_McBSP1,
-};
-
-static struct clk mmcsd0_clk = {
- .name = "mmcsd0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
- .name = "mmcsd1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_MMC_SD1,
-};
-
-static struct clk spi0_clk = {
- .name = "spi0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk spi1_clk = {
- .name = "spi1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_SPI1,
-};
-
-static struct clk spi2_clk = {
- .name = "spi2",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_SPI2,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
- .name = "pwm2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk pwm3_clk = {
- .name = "pwm3",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_PWM3,
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why can't this be disabled? */
-};
-
-static struct clk timer3_clk = {
- .name = "timer3",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_TIMER3,
-};
-
-static struct clk rto_clk = {
- .name = "rto",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_RTO,
-};
-
-static struct clk usb_clk = {
- .name = "usb",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk_lookup dm355_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
- CLK(NULL, "vpss_dac", &vpss_dac_clk),
- CLK("vpss", "master", &vpss_master_clk),
- CLK("vpss", "slave", &vpss_slave_clk),
- CLK(NULL, "clkout1", &clkout1_clk),
- CLK(NULL, "clkout2", &clkout2_clk),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
- CLK(NULL, "clkout3", &clkout3_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "mjcp", &mjcp_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("davinci-mcbsp.0", NULL, &asp0_clk),
- CLK("davinci-mcbsp.1", NULL, &asp1_clk),
- CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
- CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
- CLK("spi_davinci.0", NULL, &spi0_clk),
- CLK("spi_davinci.1", NULL, &spi1_clk),
- CLK("spi_davinci.2", NULL, &spi2_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "pwm2", &pwm2_clk),
- CLK(NULL, "pwm3", &pwm3_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK(NULL, "timer3", &timer3_clk),
- CLK(NULL, "rto", &rto_clk),
- CLK(NULL, "usb", &usb_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-/*----------------------------------------------------------------------*/
-
static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
static struct resource dm355_spi0_resources[] = {
@@ -933,8 +585,6 @@ static struct davinci_id dm355_ids[] = {
},
};
-static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
@@ -1019,8 +669,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.jtag_id_reg = 0x01c40028,
.ids = dm355_ids,
.ids_num = ARRAY_SIZE(dm355_ids),
- .psc_bases = dm355_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm355_pins,
.pinmux_pins_num = ARRAY_SIZE(dm355_pins),
@@ -1053,7 +701,6 @@ void __init dm355_init(void)
void __init dm355_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *psc;
struct clk *clk;
@@ -1068,10 +715,6 @@ void __init dm355_init_time(void)
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- davinci_clk_init(dm355_clks);
- davinci_timer_init(&timer0_clk);
-#endif
}
static struct resource dm355_pll2_resources[] = {
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/da850.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/board-omapl138-hawk.c | 12 +-
arch/arm/mach-davinci/da850.c | 653 +-------------------
arch/arm/mach-davinci/da8xx-dt.c | 12 +-
3 files changed, 3 insertions(+), 674 deletions(-)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 949ca567e965..466e87b24e9a 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -235,22 +235,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
-#ifdef CONFIG_COMMON_CLK
+
ret = da8xx_register_usb_phy_clocks();
if (ret)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
-#else
- ret = da8xx_register_usb20_phy_clk(false);
- if (ret)
- pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
- __func__, ret);
- ret = da8xx_register_usb11_phy_clk(false);
- if (ret)
- pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
- __func__, ret);
-#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9e00beb943c9..4528bbf0c861 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -38,559 +38,12 @@
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
-#ifndef CONFIG_COMMON_CLK
-static int da850_set_armrate(struct clk *clk, unsigned long rate);
-static int da850_round_armrate(struct clk *clk, unsigned long rate);
-static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
-
-static struct pll_data pll0_data = {
- .num = 1,
- .phys_base = DA8XX_PLL0_BASE,
- .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- .rate = DA850_REF_FREQ,
- .set_rate = davinci_simple_set_rate,
-};
-
-static struct clk pll0_clk = {
- .name = "pll0",
- .parent = &ref_clk,
- .pll_data = &pll0_data,
- .flags = CLK_PLL,
- .set_rate = da850_set_pll0rate,
-};
-
-static struct clk pll0_aux_clk = {
- .name = "pll0_aux_clk",
- .parent = &pll0_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll0_sysclk1 = {
- .name = "pll0_sysclk1",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll0_sysclk2 = {
- .name = "pll0_sysclk2",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll0_sysclk3 = {
- .name = "pll0_sysclk3",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
- .set_rate = davinci_set_sysclk_rate,
- .maxrate = 100000000,
-};
-
-static struct clk pll0_sysclk4 = {
- .name = "pll0_sysclk4",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll0_sysclk5 = {
- .name = "pll0_sysclk5",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll0_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll0_sysclk7 = {
- .name = "pll0_sysclk7",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
-static struct pll_data pll1_data = {
- .num = 2,
- .phys_base = DA850_PLL1_BASE,
- .flags = PLL_HAS_POSTDIV,
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .pll_data = &pll1_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static int da850_async3_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-
- if (parent == &pll0_sysclk2) {
- val &= ~CFGCHIP3_ASYNC3_CLKSRC;
- } else if (parent == &pll1_sysclk2) {
- val |= CFGCHIP3_ASYNC3_CLKSRC;
- } else {
- pr_err("Bad parent on async3 clock mux\n");
- return -EINVAL;
- }
-
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-
- return 0;
-}
-
-static struct clk async3_clk = {
- .name = "async3",
- .parent = &pll1_sysclk2,
- .set_parent = da850_async3_set_parent,
-};
-
-static struct clk i2c0_clk = {
- .name = "i2c0",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk timerp64_0_clk = {
- .name = "timer0",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk timerp64_1_clk = {
- .name = "timer1",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk arm_rom_clk = {
- .name = "arm_rom",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_ARM_RAM_ROM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk tpcc0_clk = {
- .name = "tpcc0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPCC,
- .flags = ALWAYS_ENABLED | CLK_PSC,
-};
-
-static struct clk tptc0_clk = {
- .name = "tptc0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPTC0,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk tptc1_clk = {
- .name = "tptc1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPTC1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk tpcc1_clk = {
- .name = "tpcc1",
- .parent = &pll0_sysclk2,
- .lpsc = DA850_LPSC1_TPCC1,
- .gpsc = 1,
- .flags = CLK_PSC | ALWAYS_ENABLED,
-};
-
-static struct clk tptc2_clk = {
- .name = "tptc2",
- .parent = &pll0_sysclk2,
- .lpsc = DA850_LPSC1_TPTC2,
- .gpsc = 1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk pruss_clk = {
- .name = "pruss",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_PRUSS,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_UART1,
- .gpsc = 1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_UART2,
- .gpsc = 1,
-};
-
-static struct clk aintc_clk = {
- .name = "aintc",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC0_AINTC,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_GPIO,
- .gpsc = 1,
-};
-
-static struct clk i2c1_clk = {
- .name = "i2c1",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_I2C,
- .gpsc = 1,
-};
-
-static struct clk emif3_clk = {
- .name = "emif3",
- .parent = &pll0_sysclk5,
- .lpsc = DA8XX_LPSC1_EMIF3C,
- .gpsc = 1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk arm_clk = {
- .name = "arm",
- .parent = &pll0_sysclk6,
- .lpsc = DA8XX_LPSC0_ARM,
- .flags = ALWAYS_ENABLED,
- .set_rate = da850_set_armrate,
- .round_rate = da850_round_armrate,
-};
-
-static struct clk rmii_clk = {
- .name = "rmii",
- .parent = &pll0_sysclk7,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_CPGMAC,
- .gpsc = 1,
-};
-
-/*
- * In order to avoid adding the emac_clk to the clock lookup table twice (and
- * screwing up the linked list in the process) create a separate clock for
- * mdio inheriting the rate from emac_clk.
- */
-static struct clk mdio_clk = {
- .name = "mdio",
- .parent = &emac_clk,
-};
-
-static struct clk mcasp_clk = {
- .name = "mcasp",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_McASP0,
- .gpsc = 1,
-};
-
-static struct clk mcbsp0_clk = {
- .name = "mcbsp0",
- .parent = &async3_clk,
- .lpsc = DA850_LPSC1_McBSP0,
- .gpsc = 1,
-};
-
-static struct clk mcbsp1_clk = {
- .name = "mcbsp1",
- .parent = &async3_clk,
- .lpsc = DA850_LPSC1_McBSP1,
- .gpsc = 1,
-};
-
-static struct clk lcdc_clk = {
- .name = "lcdc",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_LCDC,
- .gpsc = 1,
-};
-
-static struct clk mmcsd0_clk = {
- .name = "mmcsd0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
- .name = "mmcsd1",
- .parent = &pll0_sysclk2,
- .lpsc = DA850_LPSC1_MMC_SD1,
- .gpsc = 1,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll0_sysclk3,
- .lpsc = DA8XX_LPSC0_EMIF25,
- .flags = ALWAYS_ENABLED,
-};
-
-/*
- * In order to avoid adding the aemif_clk to the clock lookup table twice (and
- * screwing up the linked list in the process) create a separate clock for
- * nand inheriting the rate from aemif_clk.
- */
-static struct clk aemif_nand_clk = {
- .name = "nand",
- .parent = &aemif_clk,
-};
-
-static struct clk usb11_clk = {
- .name = "usb11",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_USB11,
- .gpsc = 1,
-};
-
-static struct clk usb20_clk = {
- .name = "usb20",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_USB20,
- .gpsc = 1,
-};
-
-static struct clk cppi41_clk = {
- .name = "cppi41",
- .parent = &usb20_clk,
-};
-
-static struct clk spi0_clk = {
- .name = "spi0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_SPI0,
-};
-
-static struct clk spi1_clk = {
- .name = "spi1",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_SPI1,
- .gpsc = 1,
-};
-
-static struct clk vpif_clk = {
- .name = "vpif",
- .parent = &pll0_sysclk2,
- .lpsc = DA850_LPSC1_VPIF,
- .gpsc = 1,
-};
-
-static struct clk sata_clk = {
- .name = "sata",
- .parent = &pll0_sysclk2,
- .lpsc = DA850_LPSC1_SATA,
- .gpsc = 1,
- .flags = PSC_FORCE,
-};
-
-static struct clk dsp_clk = {
- .name = "dsp",
- .parent = &pll0_sysclk1,
- .domain = DAVINCI_GPSC_DSPDOMAIN,
- .lpsc = DA8XX_LPSC0_GEM,
- .flags = PSC_LRST | PSC_FORCE,
-};
-
-static struct clk ehrpwm_clk = {
- .name = "ehrpwm",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_PWM,
- .gpsc = 1,
-};
-
-static struct clk ehrpwm0_clk = {
- .name = "ehrpwm0",
- .parent = &ehrpwm_clk,
-};
-
-static struct clk ehrpwm1_clk = {
- .name = "ehrpwm1",
- .parent = &ehrpwm_clk,
-};
-
-#define DA8XX_EHRPWM_TBCLKSYNC BIT(12)
-
-static void ehrpwm_tblck_enable(struct clk *clk)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
- val |= DA8XX_EHRPWM_TBCLKSYNC;
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
-}
-
-static void ehrpwm_tblck_disable(struct clk *clk)
-{
- u32 val;
-
- val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
- val &= ~DA8XX_EHRPWM_TBCLKSYNC;
- writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
-}
-
-static struct clk ehrpwm_tbclk = {
- .name = "ehrpwm_tbclk",
- .parent = &ehrpwm_clk,
- .clk_enable = ehrpwm_tblck_enable,
- .clk_disable = ehrpwm_tblck_disable,
-};
-
-static struct clk ehrpwm0_tbclk = {
- .name = "ehrpwm0_tbclk",
- .parent = &ehrpwm_tbclk,
-};
-
-static struct clk ehrpwm1_tbclk = {
- .name = "ehrpwm1_tbclk",
- .parent = &ehrpwm_tbclk,
-};
-
-static struct clk ecap_clk = {
- .name = "ecap",
- .parent = &async3_clk,
- .lpsc = DA8XX_LPSC1_ECAP,
- .gpsc = 1,
-};
-
-static struct clk ecap0_clk = {
- .name = "ecap0_clk",
- .parent = &ecap_clk,
-};
-
-static struct clk ecap1_clk = {
- .name = "ecap1_clk",
- .parent = &ecap_clk,
-};
-
-static struct clk ecap2_clk = {
- .name = "ecap2_clk",
- .parent = &ecap_clk,
-};
-
-static struct clk_lookup da850_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll0", &pll0_clk),
- CLK(NULL, "pll0_aux", &pll0_aux_clk),
- CLK(NULL, "pll0_sysclk1", &pll0_sysclk1),
- CLK(NULL, "pll0_sysclk2", &pll0_sysclk2),
- CLK(NULL, "pll0_sysclk3", &pll0_sysclk3),
- CLK(NULL, "pll0_sysclk4", &pll0_sysclk4),
- CLK(NULL, "pll0_sysclk5", &pll0_sysclk5),
- CLK(NULL, "pll0_sysclk6", &pll0_sysclk6),
- CLK(NULL, "pll0_sysclk7", &pll0_sysclk7),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "async3", &async3_clk),
- CLK("i2c_davinci.1", NULL, &i2c0_clk),
- CLK(NULL, "timer0", &timerp64_0_clk),
- CLK("davinci-wdt", NULL, &timerp64_1_clk),
- CLK(NULL, "arm_rom", &arm_rom_clk),
- CLK(NULL, "tpcc0", &tpcc0_clk),
- CLK(NULL, "tptc0", &tptc0_clk),
- CLK(NULL, "tptc1", &tptc1_clk),
- CLK(NULL, "tpcc1", &tpcc1_clk),
- CLK(NULL, "tptc2", &tptc2_clk),
- CLK("pruss_uio", "pruss", &pruss_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK(NULL, "aintc", &aintc_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK("i2c_davinci.2", NULL, &i2c1_clk),
- CLK(NULL, "emif3", &emif3_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "rmii", &rmii_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &mdio_clk),
- CLK("davinci-mcasp.0", NULL, &mcasp_clk),
- CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk),
- CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk),
- CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
- CLK("da830-mmc.0", NULL, &mmcsd0_clk),
- CLK("da830-mmc.1", NULL, &mmcsd1_clk),
- CLK("ti-aemif", NULL, &aemif_clk),
- CLK("davinci-nand.0", "aemif", &aemif_nand_clk),
- CLK("ohci-da8xx", NULL, &usb11_clk),
- CLK("musb-da8xx", NULL, &usb20_clk),
- CLK("cppi41-dmaengine", NULL, &cppi41_clk),
- CLK("spi_davinci.0", NULL, &spi0_clk),
- CLK("spi_davinci.1", NULL, &spi1_clk),
- CLK("vpif", NULL, &vpif_clk),
- CLK("ahci_da850", "fck", &sata_clk),
- CLK("davinci-rproc.0", NULL, &dsp_clk),
- CLK(NULL, NULL, &ehrpwm_clk),
- CLK("ehrpwm.0", "fck", &ehrpwm0_clk),
- CLK("ehrpwm.1", "fck", &ehrpwm1_clk),
- CLK(NULL, NULL, &ehrpwm_tbclk),
- CLK("ehrpwm.0", "tbclk", &ehrpwm0_tbclk),
- CLK("ehrpwm.1", "tbclk", &ehrpwm1_tbclk),
- CLK(NULL, NULL, &ecap_clk),
- CLK("ecap.0", "fck", &ecap0_clk),
- CLK("ecap.1", "fck", &ecap1_clk),
- CLK("ecap.2", "fck", &ecap2_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-
/*
* Device specific mux setup
*
@@ -965,8 +418,6 @@ static struct map_desc da850_io_desc[] = {
},
};
-static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
-
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id da850_ids[] = {
{
@@ -1176,93 +627,11 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
-
-#ifndef CONFIG_COMMON_CLK
-static int da850_round_armrate(struct clk *clk, unsigned long rate)
-{
- int ret = 0, diff;
- unsigned int best = (unsigned int) -1;
- struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
- struct cpufreq_frequency_table *pos;
-
- rate /= 1000; /* convert to kHz */
-
- cpufreq_for_each_entry(pos, table) {
- diff = pos->frequency - rate;
- if (diff < 0)
- diff = -diff;
-
- if (diff < best) {
- best = diff;
- ret = pos->frequency;
- }
- }
-
- return ret * 1000;
-}
-
-static int da850_set_armrate(struct clk *clk, unsigned long index)
-{
- struct clk *pllclk = &pll0_clk;
-
- return clk_set_rate(pllclk, index);
-}
-
-static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
-{
- struct pll_data *pll = clk->pll_data;
- struct cpufreq_frequency_table *freq;
- unsigned int prediv, mult, postdiv;
- struct da850_opp *opp = NULL;
- int ret;
-
- rate /= 1000;
-
- for (freq = da850_freq_table;
- freq->frequency != CPUFREQ_TABLE_END; freq++) {
- /* rate is in Hz, freq->frequency is in KHz */
- if (freq->frequency == rate) {
- opp = (struct da850_opp *)freq->driver_data;
- break;
- }
- }
-
- if (!opp)
- return -EINVAL;
-
- prediv = opp->prediv;
- mult = opp->mult;
- postdiv = opp->postdiv;
-
- ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
- if (WARN_ON(ret))
- return ret;
-
- return 0;
-}
-#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
-
-#ifndef CONFIG_COMMON_CLK
-static int da850_set_armrate(struct clk *clk, unsigned long rate)
-{
- return -EINVAL;
-}
-
-static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
-{
- return -EINVAL;
-}
-
-static int da850_round_armrate(struct clk *clk, unsigned long rate)
-{
- return clk->rate;
-}
-#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1364,8 +733,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
- .psc_bases = da850_psc_bases,
- .psc_bases_num = ARRAY_SIZE(da850_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
.pinmux_pins = da850_pins,
.pinmux_pins_num = ARRAY_SIZE(da850_pins),
@@ -1381,8 +748,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
void __init da850_init(void)
{
- unsigned int v;
-
davinci_common_init(&davinci_soc_info_da850);
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
@@ -1390,23 +755,11 @@ void __init da850_init(void)
return;
da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
- return;
-
- /* Unlock writing to PLL0 registers */
- v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
- v &= ~CFGCHIP0_PLL_MASTER_LOCK;
- __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
-
- /* Unlock writing to PLL1 registers */
- v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
- v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
- __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+ WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
}
void __init da850_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll0;
struct regmap *cfgchip;
struct clk *clk;
@@ -1421,10 +774,6 @@ void __init da850_init_time(void)
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- davinci_clk_init(da850_clks);
- davinci_timer_init(&timerp64_0_clk);
-#endif
}
static struct resource da850_pll1_resources[] = {
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index c4edf051ef9b..088bc5c0318b 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -69,21 +69,11 @@ static void __init da850_init_machine(void)
da850_register_clocks();
-#ifdef CONFIG_COMMON_CLK
ret = da8xx_register_usb_phy_clocks();
if (ret)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
-#else
- ret = da8xx_register_usb20_phy_clk(false);
- if (ret)
- pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
- __func__, ret);
- ret = da8xx_register_usb11_phy_clk(false);
- if (ret)
- pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
- __func__, ret);
-#endif
+
ret = da850_register_sata_refclk(sata_refclkpn);
if (ret)
pr_warn("%s: registering SATA REFCLK failed: %d",
--
2.17.0
This adds the new SATA REFCLK clock init in mach-davinci/devices-da8xx.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also, the #includes are sorted since we are adding some here.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v10 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- none
v6 changes:
- none
arch/arm/mach-davinci/devices-da8xx.c | 36 ++++++++++++++++++++-------
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 78390c64e6ca..73de449bbc68 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -10,25 +10,30 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-contiguous.h>
-#include <linux/serial_8250.h>
#include <linux/ahci_platform.h>
+#include <linux/clk-provider.h>
#include <linux/clk.h>
-#include <linux/reboot.h>
+#include <linux/clkdev.h>
+#include <linux/dma-contiguous.h>
#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/serial_8250.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
+#include <mach/cputype.h>
#include <mach/da8xx.h>
-#include <mach/clock.h>
+#include <mach/time.h>
+
+#include "asp.h"
#include "cpuidle.h"
#include "sram.h"
+#ifndef CONFIG_COMMON_CLK
+#include <mach/clock.h>
#include "clock.h"
-#include "asp.h"
+#endif
#define DA8XX_TPCC_BASE 0x01c00000
#define DA8XX_TPTC0_BASE 0x01c08000
@@ -1040,6 +1045,7 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
}
#ifdef CONFIG_ARCH_DAVINCI_DA850
+#ifndef CONFIG_COMMON_CLK
static struct clk sata_refclk = {
.name = "sata_refclk",
.set_rate = davinci_simple_set_rate,
@@ -1061,6 +1067,18 @@ int __init da850_register_sata_refclk(int rate)
return 0;
}
+#else
+int __init da850_register_sata_refclk(int rate)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return clk_register_clkdev(clk, "refclk", "ahci_da850");
+}
+#endif
static struct resource da850_sata_resources[] = {
{
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm365.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/dm365.c | 449 ----------------------------------
1 file changed, 449 deletions(-)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 76de426a0e41..abcf2a5ed89b 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -40,11 +40,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */
#define DM365_RTC_BASE 0x01c69000
#define DM365_KEYSCAN_BASE 0x01c69400
@@ -60,441 +55,6 @@
#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000
#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
- .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
- .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- .rate = DM365_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll1_data,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk clkout0_clk = {
- .name = "clkout0",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll1_sysclk6",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
- .name = "pll1_sysclk7",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
-static struct clk pll1_sysclk8 = {
- .name = "pll1_sysclk8",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV8,
-};
-
-static struct clk pll1_sysclk9 = {
- .name = "pll1_sysclk9",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV9,
-};
-
-static struct clk pll2_clk = {
- .name = "pll2",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll2_data,
-};
-
-static struct clk pll2_aux_clk = {
- .name = "pll2_aux_clk",
- .parent = &pll2_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk clkout1_clk = {
- .name = "clkout1",
- .parent = &pll2_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclk2 = {
- .name = "pll2_sysclk2",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll2_sysclk3 = {
- .name = "pll2_sysclk3",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll2_sysclk4 = {
- .name = "pll2_sysclk4",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll2_sysclk5 = {
- .name = "pll2_sysclk5",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll2_sysclk6 = {
- .name = "pll2_sysclk6",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll2_sysclk7 = {
- .name = "pll2_sysclk7",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
-static struct clk pll2_sysclk8 = {
- .name = "pll2_sysclk8",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV8,
-};
-
-static struct clk pll2_sysclk9 = {
- .name = "pll2_sysclk9",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV9,
-};
-
-static struct clk vpss_dac_clk = {
- .name = "vpss_dac",
- .parent = &pll1_sysclk3,
- .lpsc = DM365_LPSC_DAC_CLK,
-};
-
-static struct clk vpss_master_clk = {
- .name = "vpss_master",
- .parent = &pll1_sysclk5,
- .lpsc = DM365_LPSC_VPSSMSTR,
- .flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
- .name = "vpss_slave",
- .parent = &pll1_sysclk5,
- .lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk arm_clk = {
- .name = "arm_clk",
- .parent = &pll2_sysclk2,
- .lpsc = DAVINCI_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk i2c_clk = {
- .name = "i2c",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk mmcsd0_clk = {
- .name = "mmcsd0",
- .parent = &pll1_sysclk8,
- .lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
- .name = "mmcsd1",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_MMC_SD1,
-};
-
-static struct clk spi0_clk = {
- .name = "spi0",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk spi1_clk = {
- .name = "spi1",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_SPI1,
-};
-
-static struct clk spi2_clk = {
- .name = "spi2",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_SPI2,
-};
-
-static struct clk spi3_clk = {
- .name = "spi3",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_SPI3,
-};
-
-static struct clk spi4_clk = {
- .name = "spi4",
- .parent = &pll1_aux_clk,
- .lpsc = DM365_LPSC_SPI4,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
- .name = "pwm2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk pwm3_clk = {
- .name = "pwm3",
- .parent = &ref_clk,
- .lpsc = DM365_LPSC_PWM3,
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1,
-};
-
-static struct clk timer3_clk = {
- .name = "timer3",
- .parent = &pll1_aux_clk,
- .lpsc = DM365_LPSC_TIMER3,
-};
-
-static struct clk usb_clk = {
- .name = "usb",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_EMAC,
-};
-
-static struct clk voicecodec_clk = {
- .name = "voice_codec",
- .parent = &pll2_sysclk4,
- .lpsc = DM365_LPSC_VOICE_CODEC,
-};
-
-static struct clk asp0_clk = {
- .name = "asp0",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_McBSP1,
-};
-
-static struct clk rto_clk = {
- .name = "rto",
- .parent = &pll1_sysclk4,
- .lpsc = DM365_LPSC_RTO,
-};
-
-static struct clk mjcp_clk = {
- .name = "mjcp",
- .parent = &pll1_sysclk3,
- .lpsc = DM365_LPSC_MJCP,
-};
-
-static struct clk_lookup dm365_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
- CLK(NULL, "clkout0", &clkout0_clk),
- CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
- CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
- CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_aux", &pll2_aux_clk),
- CLK(NULL, "clkout1", &clkout1_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
- CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
- CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
- CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
- CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
- CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
- CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
- CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
- CLK(NULL, "vpss_dac", &vpss_dac_clk),
- CLK("vpss", "master", &vpss_master_clk),
- CLK("vpss", "slave", &vpss_slave_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("da830-mmc.0", NULL, &mmcsd0_clk),
- CLK("da830-mmc.1", NULL, &mmcsd1_clk),
- CLK("spi_davinci.0", NULL, &spi0_clk),
- CLK("spi_davinci.1", NULL, &spi1_clk),
- CLK("spi_davinci.2", NULL, &spi2_clk),
- CLK("spi_davinci.3", NULL, &spi3_clk),
- CLK("spi_davinci.4", NULL, &spi4_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "pwm2", &pwm2_clk),
- CLK(NULL, "pwm3", &pwm3_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK(NULL, "timer3", &timer3_clk),
- CLK(NULL, "usb", &usb_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
- CLK("davinci_voicecodec", NULL, &voicecodec_clk),
- CLK("davinci-mcbsp", NULL, &asp0_clk),
- CLK(NULL, "rto", &rto_clk),
- CLK(NULL, "mjcp", &mjcp_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-/*----------------------------------------------------------------------*/
-
#define INTMUX 0x18
#define EVTMUX 0x1c
@@ -1061,8 +621,6 @@ static struct davinci_id dm365_ids[] = {
},
};
-static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
static struct davinci_timer_info dm365_timer_info = {
.timers = davinci_timer_instance,
.clockevent_id = T0_BOT,
@@ -1123,8 +681,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
.jtag_id_reg = 0x01c40028,
.ids = dm365_ids,
.ids_num = ARRAY_SIZE(dm365_ids),
- .psc_bases = dm365_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm365_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm365_pins,
.pinmux_pins_num = ARRAY_SIZE(dm365_pins),
@@ -1178,7 +734,6 @@ void __init dm365_init(void)
void __init dm365_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *pll2, *psc;
struct clk *clk;
@@ -1196,10 +751,6 @@ void __init dm365_init_time(void)
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- davinci_clk_init(dm365_clks);
- davinci_timer_init(&timer0_clk);
-#endif
}
void __init dm365_register_clocks(void)
--
2.17.0
This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- none
v6 changes:
- none
arch/arm/configs/davinci_all_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 21b2d7791df4..f83ea4131df2 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -31,7 +31,6 @@ CONFIG_MACH_MITYOMAPL138=y
CONFIG_MACH_OMAPL138_HAWKBOARD=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
-CONFIG_DAVINCI_RESET_CLOCKS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMA=y
--
2.17.0
This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- rebased on "ARM: davinci: DA8XX: fix oops in USB PHY driver due to stack
allocated platform platform_data"
v7 changes:
- register platform device instead of registering clocks directly
- USB PHY clocks now treated as single device instead of registering them
separately
v6 changes:
- rename stuff to match changes in "clk: davinci: New driver for TI DA8XX USB
PHY clocks"
- take advantage of syscon lookup changes in "mfd: syscon: Add syscon_register()
function"
arch/arm/mach-davinci/board-da830-evm.c | 8 ++++++-
arch/arm/mach-davinci/board-omapl138-hawk.c | 9 +++++--
arch/arm/mach-davinci/da8xx-dt.c | 8 ++++++-
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
arch/arm/mach-davinci/usb-da8xx.c | 26 +++++++++++++++++++--
5 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 74df37821abe..ccddbae951d6 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -110,6 +110,12 @@ static __init void da830_evm_usb_init(void)
{
int ret;
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
/* USB_REFCLKIN is not used. */
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
@@ -120,7 +126,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 7653e9425d44..949ca567e965 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -235,7 +235,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
-
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
@@ -245,7 +250,7 @@ static __init void omapl138_hawk_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 91dd9cb6d113..c4edf051ef9b 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -69,6 +69,12 @@ static void __init da850_init_machine(void)
da850_register_clocks();
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
@@ -77,7 +83,7 @@ static void __init da850_init_machine(void)
if (ret)
pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
__func__, ret);
-
+#endif
ret = da850_register_sata_refclk(sata_refclkpn);
if (ret)
pr_warn("%s: registering SATA REFCLK failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 612e45437cec..5d7b1de9aa7e 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -106,6 +106,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void);
int da8xx_register_uio_pruss(void);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 50445f0e98de..c8d2f3075e69 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -2,29 +2,35 @@
/*
* DA8xx USB
*/
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <mach/irqs.h>
+#ifndef CONFIG_COMMON_CLK
+#include <mach/clock.h>
#include "clock.h"
+#endif
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+#ifndef CONFIG_COMMON_CLK
static struct clk *usb20_clk;
+#endif
static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
@@ -134,6 +140,7 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
+#ifndef CONFIG_COMMON_CLK
static struct clk usb_refclkin = {
.name = "usb_refclkin",
.set_rate = davinci_simple_set_rate,
@@ -360,3 +367,18 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
return ret;
}
+#endif
+static struct platform_device da8xx_usb_phy_clks_device = {
+ .name = "da830-usb-phy-clks",
+ .id = -1,
+};
+
+int __init da8xx_register_usb_phy_clocks(void)
+{
+ struct da8xx_cfgchip_clk_platform_data pdata;
+
+ pdata.cfgchip = da8xx_get_cfgchip();
+ da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
+
+ return platform_device_register(&da8xx_usb_phy_clks_device);
+}
--
2.17.0
The common clock framework will take care of disabling unused clocks when
we switch from the legacy davinci clocks and having this enabled will
cause compile errors after we switch, so remove it now.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- none
v6 changes:
- none
arch/arm/mach-davinci/Kconfig | 12 ------------
arch/arm/mach-davinci/common.c | 1 -
arch/arm/mach-davinci/include/mach/common.h | 6 ------
3 files changed, 19 deletions(-)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 05c3eecf47cb..ba9912b4dfab 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -231,18 +231,6 @@ config DAVINCI_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect DAVINCI_MUX for your product.
-config DAVINCI_RESET_CLOCKS
- bool "Reset unused clocks during boot"
- depends on ARCH_DAVINCI
- help
- Say Y if you want to reset unused clocks during boot.
- This option saves power, but assumes all drivers are
- using the clock framework. Broken drivers that do not
- yet use clock framework may not work with this option.
- If you are booting from another operating system, you
- probably do not want this option enabled until your
- device drivers work properly.
-
endmenu
endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index bcb6a7ba84e9..e03f95ccd95c 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -118,5 +118,4 @@ void __init davinci_common_init(const struct davinci_soc_info *soc_info)
void __init davinci_init_late(void)
{
davinci_cpufreq_init();
- davinci_clk_disable_unused();
}
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 5f45d0ac66a8..ded8f5f42725 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -83,12 +83,6 @@ extern void davinci_common_init(const struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
void davinci_init_late(void);
-#ifdef CONFIG_DAVINCI_RESET_CLOCKS
-int davinci_clk_disable_unused(void);
-#else
-static inline int davinci_clk_disable_unused(void) { return 0; }
-#endif
-
#ifdef CONFIG_CPU_FREQ
int davinci_cpufreq_init(void);
#else
--
2.17.0
This switches ARCH_DAVINCI to use the common clock framework. The legacy
clock code in arch/arm/mach-davinci/ is no longer used. New drivers in
drivers/clk/davinci/ are used instead.
A few macros had to be moved to prevent compilation errors.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- none
v8 changes:
- none
v7 changes:
- s/compile/compilation and space instead of tab
- add PM_GENERIC_DOMAINS dependencies
v6 changes:
- clean up indent on Common objects section
arch/arm/Kconfig | 5 ++++-
arch/arm/mach-davinci/Makefile | 4 ++--
arch/arm/mach-davinci/clock.h | 4 ----
arch/arm/mach-davinci/davinci.h | 4 ++++
arch/arm/mach-davinci/psc.h | 2 --
5 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a7f8e7f4b88f..a57ad13810c8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -609,13 +609,16 @@ config ARCH_S3C24XX
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GPIOLIB
select HAVE_IDE
+ select PM_GENERIC_DOMAINS if PM
+ select PM_GENERIC_DOMAINS_OF if PM && OF
+ select RESET_CONTROLLER
select USE_OF
select ZONE_DMA
help
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 4e8178050027..8725d8bea567 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,8 +5,8 @@
#
# Common objects
-obj-y := time.o clock.o serial.o psc.o \
- usb.o common.o sram.o aemif.o
+obj-y := time.o serial.o usb.o \
+ common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index d7894d5aaa25..2d058568e004 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -12,10 +12,6 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
-#define DAVINCI_PLL1_BASE 0x01c40800
-#define DAVINCI_PLL2_BASE 0x01c40c00
-#define MAX_PLL 2
-
/* PLL/Reset register offsets */
#define PLLCTL 0x100
#define PLLCTL_PLLEN BIT(0)
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index fa99197d36f9..db4c95ef4d5c 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -35,6 +35,10 @@
#include <media/davinci/vpbe.h>
#include <media/davinci/vpbe_osd.h>
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01c41000
+
#define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000
#define SYSMOD_VDAC_CONFIG 0x2c
#define SYSMOD_VIDCLKCTL 0x38
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index 8af9f09fc10c..b58707cf7033 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -27,8 +27,6 @@
#ifndef __ASM_ARCH_PSC_H
#define __ASM_ARCH_PSC_H
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
--
2.17.0
This adds the new board-specific clock init in mach-davinci/dm365.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL1 and PSC in dm365_init_time() instead of as platform device so
that we get the correct timer0 clock for davinci_timer_init()
- Fixed size of PLL memory block
v8 changes:
- none
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
arch/arm/mach-davinci/board-dm365-evm.c | 2 +
arch/arm/mach-davinci/davinci.h | 1 +
arch/arm/mach-davinci/dm365.c | 56 +++++++++++++++++++------
3 files changed, 47 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 435f7ec7d9af..307e88d99dd3 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -742,6 +742,8 @@ static __init void dm365_evm_init(void)
{
int ret;
+ dm365_register_clocks();
+
ret = dm365_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index c2c634b6578e..a799b5266d4b 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -94,6 +94,7 @@ int dm355_gpio_register(void);
/* DM365 function declarations */
void dm365_init(void);
void dm365_init_time(void);
+void dm365_register_clocks(void);
void dm365_init_asp(void);
void dm365_init_vc(void);
void dm365_init_ks(struct davinci_ks_platform_data *pdata);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 871372a59da8..76de426a0e41 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -12,32 +12,38 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
-#include <linux/spi/spi.h>
+#include <linux/init.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/cputype.h>
-#include "psc.h"
-#include <mach/mux.h>
#include <mach/irqs.h>
-#include <mach/time.h>
+#include <mach/mux.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */
#define DM365_RTC_BASE 0x01c69000
@@ -54,6 +60,7 @@
#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000
#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -485,7 +492,7 @@ static struct clk_lookup dm365_clks[] = {
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, NULL, NULL),
};
-
+#endif
/*----------------------------------------------------------------------*/
#define INTMUX 0x18
@@ -1171,8 +1178,33 @@ void __init dm365_init(void)
void __init dm365_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *pll2, *psc;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
+ dm365_pll1_init(NULL, pll1, NULL);
+
+ pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
+ dm365_pll2_init(NULL, pll2, NULL);
+
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+ dm365_psc_init(NULL, psc);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(dm365_clks);
davinci_timer_init(&timer0_clk);
+#endif
+}
+
+void __init dm365_register_clocks(void)
+{
+ /* all clocks are currently registered in dm365_init_time() */
}
static struct resource dm365_vpss_resources[] = {
--
2.17.0
This removes the unused legacy clock init code from
arch/arm/mach-davinci/da830.c.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- rebased
v8 changes:
- none
v7 changes:
- rebased
- add davinci prefix to commit message
v6 changes:
- rebased
arch/arm/mach-davinci/board-da830-evm.c | 12 -
arch/arm/mach-davinci/da830.c | 412 ------------------------
2 files changed, 424 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ccddbae951d6..b2470141dba3 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -110,23 +110,11 @@ static __init void da830_evm_usb_init(void)
{
int ret;
-#ifdef CONFIG_COMMON_CLK
ret = da8xx_register_usb_phy_clocks();
if (ret)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
-#else
- /* USB_REFCLKIN is not used. */
- ret = da8xx_register_usb20_phy_clk(false);
- if (ret)
- pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
- __func__, ret);
- ret = da8xx_register_usb11_phy_clk(false);
- if (ret)
- pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
- __func__, ret);
-#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 8a79e245db1f..0bc5bd2665df 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -24,11 +24,6 @@
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
/* Offsets of the 8 compare registers on the da830 */
#define DA830_CMP12_0 0x60
#define DA830_CMP12_1 0x64
@@ -41,404 +36,6 @@
#define DA830_REF_FREQ 24000000
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll0_data = {
- .num = 1,
- .phys_base = DA8XX_PLL0_BASE,
- .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- .rate = DA830_REF_FREQ,
-};
-
-static struct clk pll0_clk = {
- .name = "pll0",
- .parent = &ref_clk,
- .pll_data = &pll0_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll0_aux_clk = {
- .name = "pll0_aux_clk",
- .parent = &pll0_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll0_sysclk2 = {
- .name = "pll0_sysclk2",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll0_sysclk3 = {
- .name = "pll0_sysclk3",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll0_sysclk4 = {
- .name = "pll0_sysclk4",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll0_sysclk5 = {
- .name = "pll0_sysclk5",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll0_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll0_sysclk7 = {
- .name = "pll0_sysclk7",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
-static struct clk i2c0_clk = {
- .name = "i2c0",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk timerp64_0_clk = {
- .name = "timer0",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk timerp64_1_clk = {
- .name = "timer1",
- .parent = &pll0_aux_clk,
-};
-
-static struct clk arm_rom_clk = {
- .name = "arm_rom",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_ARM_RAM_ROM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk scr0_ss_clk = {
- .name = "scr0_ss",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_SCR0_SS,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk scr1_ss_clk = {
- .name = "scr1_ss",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_SCR1_SS,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk scr2_ss_clk = {
- .name = "scr2_ss",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_SCR2_SS,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk dmax_clk = {
- .name = "dmax",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_PRUSS,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk tpcc_clk = {
- .name = "tpcc",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPCC,
- .flags = ALWAYS_ENABLED | CLK_PSC,
-};
-
-static struct clk tptc0_clk = {
- .name = "tptc0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPTC0,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk tptc1_clk = {
- .name = "tptc1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_TPTC1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk mmcsd_clk = {
- .name = "mmcsd",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_MMC_SD,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_UART1,
- .gpsc = 1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_UART2,
- .gpsc = 1,
-};
-
-static struct clk spi0_clk = {
- .name = "spi0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC0_SPI0,
-};
-
-static struct clk spi1_clk = {
- .name = "spi1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_SPI1,
- .gpsc = 1,
-};
-
-static struct clk ecap0_clk = {
- .name = "ecap0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_ECAP,
- .gpsc = 1,
-};
-
-static struct clk ecap1_clk = {
- .name = "ecap1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_ECAP,
- .gpsc = 1,
-};
-
-static struct clk ecap2_clk = {
- .name = "ecap2",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_ECAP,
- .gpsc = 1,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_PWM,
- .gpsc = 1,
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_PWM,
- .gpsc = 1,
-};
-
-static struct clk pwm2_clk = {
- .name = "pwm2",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_PWM,
- .gpsc = 1,
-};
-
-static struct clk eqep0_clk = {
- .name = "eqep0",
- .parent = &pll0_sysclk2,
- .lpsc = DA830_LPSC1_EQEP,
- .gpsc = 1,
-};
-
-static struct clk eqep1_clk = {
- .name = "eqep1",
- .parent = &pll0_sysclk2,
- .lpsc = DA830_LPSC1_EQEP,
- .gpsc = 1,
-};
-
-static struct clk lcdc_clk = {
- .name = "lcdc",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_LCDC,
- .gpsc = 1,
-};
-
-static struct clk mcasp0_clk = {
- .name = "mcasp0",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_McASP0,
- .gpsc = 1,
-};
-
-static struct clk mcasp1_clk = {
- .name = "mcasp1",
- .parent = &pll0_sysclk2,
- .lpsc = DA830_LPSC1_McASP1,
- .gpsc = 1,
-};
-
-static struct clk mcasp2_clk = {
- .name = "mcasp2",
- .parent = &pll0_sysclk2,
- .lpsc = DA830_LPSC1_McASP2,
- .gpsc = 1,
-};
-
-static struct clk usb20_clk = {
- .name = "usb20",
- .parent = &pll0_sysclk2,
- .lpsc = DA8XX_LPSC1_USB20,
- .gpsc = 1,
-};
-
-static struct clk cppi41_clk = {
- .name = "cppi41",
- .parent = &usb20_clk,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll0_sysclk3,
- .lpsc = DA8XX_LPSC0_EMIF25,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk aintc_clk = {
- .name = "aintc",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC0_AINTC,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk secu_mgr_clk = {
- .name = "secu_mgr",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC0_SECU_MGR,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_CPGMAC,
- .gpsc = 1,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_GPIO,
- .gpsc = 1,
-};
-
-static struct clk i2c1_clk = {
- .name = "i2c1",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_I2C,
- .gpsc = 1,
-};
-
-static struct clk usb11_clk = {
- .name = "usb11",
- .parent = &pll0_sysclk4,
- .lpsc = DA8XX_LPSC1_USB11,
- .gpsc = 1,
-};
-
-static struct clk emif3_clk = {
- .name = "emif3",
- .parent = &pll0_sysclk5,
- .lpsc = DA8XX_LPSC1_EMIF3C,
- .gpsc = 1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk arm_clk = {
- .name = "arm",
- .parent = &pll0_sysclk6,
- .lpsc = DA8XX_LPSC0_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk rmii_clk = {
- .name = "rmii",
- .parent = &pll0_sysclk7,
-};
-
-static struct clk_lookup da830_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll0", &pll0_clk),
- CLK(NULL, "pll0_aux", &pll0_aux_clk),
- CLK(NULL, "pll0_sysclk2", &pll0_sysclk2),
- CLK(NULL, "pll0_sysclk3", &pll0_sysclk3),
- CLK(NULL, "pll0_sysclk4", &pll0_sysclk4),
- CLK(NULL, "pll0_sysclk5", &pll0_sysclk5),
- CLK(NULL, "pll0_sysclk6", &pll0_sysclk6),
- CLK(NULL, "pll0_sysclk7", &pll0_sysclk7),
- CLK("i2c_davinci.1", NULL, &i2c0_clk),
- CLK(NULL, "timer0", &timerp64_0_clk),
- CLK("davinci-wdt", NULL, &timerp64_1_clk),
- CLK(NULL, "arm_rom", &arm_rom_clk),
- CLK(NULL, "scr0_ss", &scr0_ss_clk),
- CLK(NULL, "scr1_ss", &scr1_ss_clk),
- CLK(NULL, "scr2_ss", &scr2_ss_clk),
- CLK(NULL, "dmax", &dmax_clk),
- CLK(NULL, "tpcc", &tpcc_clk),
- CLK(NULL, "tptc0", &tptc0_clk),
- CLK(NULL, "tptc1", &tptc1_clk),
- CLK("da830-mmc.0", NULL, &mmcsd_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("spi_davinci.0", NULL, &spi0_clk),
- CLK("spi_davinci.1", NULL, &spi1_clk),
- CLK(NULL, "ecap0", &ecap0_clk),
- CLK(NULL, "ecap1", &ecap1_clk),
- CLK(NULL, "ecap2", &ecap2_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "pwm2", &pwm2_clk),
- CLK("eqep.0", NULL, &eqep0_clk),
- CLK("eqep.1", NULL, &eqep1_clk),
- CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
- CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
- CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
- CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
- CLK("musb-da8xx", NULL, &usb20_clk),
- CLK("cppi41-dmaengine", NULL, &cppi41_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "aintc", &aintc_clk),
- CLK(NULL, "secu_mgr", &secu_mgr_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK("i2c_davinci.2", NULL, &i2c1_clk),
- CLK("ohci-da8xx", NULL, &usb11_clk),
- CLK(NULL, "emif3", &emif3_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "rmii", &rmii_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-
/*
* Device specific mux setup
*
@@ -1136,8 +733,6 @@ static struct map_desc da830_io_desc[] = {
},
};
-static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
-
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id da830_ids[] = {
{
@@ -1206,8 +801,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
- .psc_bases = da830_psc_bases,
- .psc_bases_num = ARRAY_SIZE(da830_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
.pinmux_pins = da830_pins,
.pinmux_pins_num = ARRAY_SIZE(da830_pins),
@@ -1229,7 +822,6 @@ void __init da830_init(void)
void __init da830_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll;
struct clk *clk;
@@ -1242,10 +834,6 @@ void __init da830_init_time(void)
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
-#else
- davinci_clk_init(da830_clks);
- davinci_timer_init(&timerp64_0_clk);
-#endif
}
static struct resource da830_psc0_resources[] = {
--
2.17.0
This adds the new board-specific clock init in mach-davinci/dm355.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none (reported problems fixed in separate patch series [1])
[1]: https://lkml.org/lkml/2018/5/9/626
v9 changes:
- register PLL1 and PSC in dm355_init_time() instead of as platform device so
that we get the correct timer0 clock for davinci_timer_init()
- Fixed size of PLL memory block
v8 changes:
- none
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
arch/arm/mach-davinci/board-dm355-evm.c | 2 +
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +
arch/arm/mach-davinci/davinci.h | 1 +
arch/arm/mach-davinci/dm355.c | 69 +++++++++++++++++----
4 files changed, 62 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index a3377f959444..f53a461a606f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -394,6 +394,8 @@ static __init void dm355_evm_init(void)
struct clk *aemif;
int ret;
+ dm355_register_clocks();
+
ret = dm355_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 8249a0bf69f0..0fdf1d03eb11 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -234,6 +234,8 @@ static __init void dm355_leopard_init(void)
struct clk *aemif;
int ret;
+ dm355_register_clocks();
+
ret = dm355_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 376cdd51ce9d..c2c634b6578e 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -84,6 +84,7 @@ int davinci_init_wdt(void);
/* DM355 function declarations */
void dm355_init(void);
void dm355_init_time(void);
+void dm355_register_clocks(void);
void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
void dm355_init_asp1(u32 evt_enable);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 0da7516018ca..14014b942e8a 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -8,31 +8,37 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
-#include <linux/spi/spi.h>
+#include <linux/init.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/cputype.h>
-#include "psc.h"
-#include <mach/mux.h>
#include <mach/irqs.h>
-#include <mach/time.h>
+#include <mach/mux.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
#define DM355_OSD_BASE (IO_PHYS + 0x70200)
@@ -43,6 +49,7 @@
*/
#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -382,7 +389,7 @@ static struct clk_lookup dm355_clks[] = {
CLK(NULL, "usb", &usb_clk),
CLK(NULL, NULL, NULL),
};
-
+#endif
/*----------------------------------------------------------------------*/
static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
@@ -1046,8 +1053,46 @@ void __init dm355_init(void)
void __init dm355_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *psc;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
+ dm355_pll1_init(NULL, pll1, NULL);
+
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+ dm355_psc_init(NULL, psc);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(dm355_clks);
davinci_timer_init(&timer0_clk);
+#endif
+}
+
+static struct resource dm355_pll2_resources[] = {
+ {
+ .start = DAVINCI_PLL2_BASE,
+ .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm355_pll2_device = {
+ .name = "dm355-pll2",
+ .id = -1,
+ .resource = dm355_pll2_resources,
+ .num_resources = ARRAY_SIZE(dm355_pll2_resources),
+};
+
+void __init dm355_register_clocks(void)
+{
+ /* PLL1 and PSC are registered in dm355_init_time() */
+ platform_device_register(&dm355_pll2_device);
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
--
2.17.0
This changes davinci_timer_init() so that we pass the clock as a
parameter instead of using clk_get(). This is done in preparation
for converting to the common clock framework.
It removes the requirement that we have to have a clock with con_id
of "timer0", which will be good for DT bindings since clock-names =
"timer0" doesn't really make sense.
Also, drop use of extern in header file since we are touching the
definition.
Reviewed-by: Sekhar Nori <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- drop comment about using ref_clk
v8 changes:
- none
v7 changes:
- new in v7
arch/arm/mach-davinci/da830.c | 2 +-
arch/arm/mach-davinci/da850.c | 2 +-
arch/arm/mach-davinci/dm355.c | 2 +-
arch/arm/mach-davinci/dm365.c | 2 +-
arch/arm/mach-davinci/dm644x.c | 2 +-
arch/arm/mach-davinci/dm646x.c | 2 +-
arch/arm/mach-davinci/include/mach/common.h | 3 ++-
arch/arm/mach-davinci/time.c | 5 +----
8 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 350d7673aa4d..0b17e5a22e5e 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1224,5 +1224,5 @@ void __init da830_init(void)
void __init da830_init_time(void)
{
davinci_clk_init(da830_clks);
- davinci_timer_init();
+ davinci_timer_init(&timerp64_0_clk);
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 34117e614e08..1dbf01c4124b 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1396,5 +1396,5 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
davinci_clk_init(da850_clks);
- davinci_timer_init();
+ davinci_timer_init(&timerp64_0_clk);
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index f29480495c18..0da7516018ca 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1047,7 +1047,7 @@ void __init dm355_init(void)
void __init dm355_init_time(void)
{
davinci_clk_init(dm355_clks);
- davinci_timer_init();
+ davinci_timer_init(&timer0_clk);
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 1e3df9df1e10..871372a59da8 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1172,7 +1172,7 @@ void __init dm365_init(void)
void __init dm365_init_time(void)
{
davinci_clk_init(dm365_clks);
- davinci_timer_init();
+ davinci_timer_init(&timer0_clk);
}
static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index a2e8586c8a6d..708df0ed8554 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -935,7 +935,7 @@ void __init dm644x_init(void)
void __init dm644x_init_time(void)
{
davinci_clk_init(dm644x_clks);
- davinci_timer_init();
+ davinci_timer_init(&timer0_clk);
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index c32ca27ab343..280b753702f3 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -957,7 +957,7 @@ void __init dm646x_init_time(unsigned long ref_clk_rate,
ref_clk.rate = ref_clk_rate;
aux_clkin.rate = aux_clkin_rate;
davinci_clk_init(dm646x_clks);
- davinci_timer_init();
+ davinci_timer_init(&timer0_clk);
}
static int __init dm646x_init_devices(void)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index f0d5e858f158..5f45d0ac66a8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -12,11 +12,12 @@
#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#include <linux/clk.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/reboot.h>
-extern void davinci_timer_init(void);
+void davinci_timer_init(struct clk *clk);
extern void davinci_irq_init(void);
extern void __iomem *davinci_intc_base;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 1bb991ad9c1e..486896f309c5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -334,10 +334,8 @@ static struct clock_event_device clockevent_davinci = {
.set_state_oneshot = davinci_set_oneshot,
};
-
-void __init davinci_timer_init(void)
+void __init davinci_timer_init(struct clk *timer_clk)
{
- struct clk *timer_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
unsigned int clockevent_id;
unsigned int clocksource_id;
@@ -373,7 +371,6 @@ void __init davinci_timer_init(void)
}
}
- timer_clk = clk_get(NULL, "timer0");
BUG_ON(IS_ERR(timer_clk));
clk_prepare_enable(timer_clk);
--
2.17.0
This adds the new board-specific clock init in mach-davinci/dm644x.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <[email protected]>
---
v11 chages:
- none
v10 changes:
- fix copy/paste error s/dm355/dm644x/
v9 changes:
- register PLL1 and PSC in dm644x_init_time() instead of as platform device so
that we get the correct timer0 clock for davinci_timer_init()
- Fixed size of PLL memory block
v8 changes:
- none
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +
arch/arm/mach-davinci/board-sffsdr.c | 2 +
arch/arm/mach-davinci/davinci.h | 1 +
arch/arm/mach-davinci/dm644x.c | 64 +++++++++++++++++++----
5 files changed, 62 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 48436f74fd71..738e443ab15f 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -773,6 +773,8 @@ static __init void davinci_evm_init(void)
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ dm644x_register_clocks();
+
dm644x_init_devices();
ret = dm644x_gpio_register();
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 25ad9b0612be..353f9e5a1454 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -175,6 +175,8 @@ static __init void davinci_ntosd2_init(void)
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ dm644x_register_clocks();
+
dm644x_init_devices();
ret = dm644x_gpio_register();
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index e7c1728b0833..792bb84d5011 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -134,6 +134,8 @@ static __init void davinci_sffsdr_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ dm644x_register_clocks();
+
dm644x_init_devices();
platform_add_devices(davinci_sffsdr_devices,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a799b5266d4b..16aca5853ab2 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -108,6 +108,7 @@ int dm365_gpio_register(void);
void dm644x_init(void);
void dm644x_init_devices(void);
void dm644x_init_time(void);
+void dm644x_register_clocks(void);
void dm644x_init_asp(void);
int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
int dm644x_gpio_register(void);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 708df0ed8554..c3cd27c6cd70 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -8,28 +8,34 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dmaengine.h>
-#include <linux/platform_device.h>
+#include <linux/init.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include "psc.h"
#include <mach/mux.h>
-#include <mach/time.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
/*
* Device specific clocks
@@ -43,6 +49,7 @@
#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -326,6 +333,7 @@ static struct clk_lookup dm644x_clks[] = {
CLK("davinci-wdt", NULL, &timer2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
static struct emac_platform_data dm644x_emac_pdata = {
.ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
@@ -934,8 +942,46 @@ void __init dm644x_init(void)
void __init dm644x_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *psc;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ);
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
+ dm644x_pll1_init(NULL, pll1, NULL);
+
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+ dm644x_psc_init(NULL, psc);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(dm644x_clks);
davinci_timer_init(&timer0_clk);
+#endif
+}
+
+static struct resource dm644x_pll2_resources[] = {
+ {
+ .start = DAVINCI_PLL2_BASE,
+ .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm644x_pll2_device = {
+ .name = "dm644x-pll2",
+ .id = -1,
+ .resource = dm644x_pll2_resources,
+ .num_resources = ARRAY_SIZE(dm644x_pll2_resources),
+};
+
+void __init dm644x_register_clocks(void)
+{
+ /* PLL1 and PSC are registered in dm644x_init_time() */
+ platform_device_register(&dm644x_pll2_device);
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
--
2.17.0
On some davinci SoCs, we need to register the PSC clocks during early
boot because they are needed for clocksource/clockevent. These changes
allow for dev == NULL because in this case, we won't have a platform
device for the clocks.
Some function declarations are moved to a public header files so that they can
be called from mach init code.
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- proper unwinding on errors
- add #include <linux/clk/davinci.h> to avoid W=1 warnings
v10 changes:
- dropped helper functions that conditionally called devm_ versions of functions
v9 changes:
- new patch in v9
drivers/clk/davinci/psc-dm355.c | 3 +-
drivers/clk/davinci/psc-dm365.c | 3 +-
drivers/clk/davinci/psc-dm644x.c | 3 +-
drivers/clk/davinci/psc-dm646x.c | 3 +-
drivers/clk/davinci/psc.c | 58 ++++++++++++++++++++++++--------
include/linux/clk/davinci.h | 5 +++
6 files changed, 57 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/davinci/psc-dm355.c b/drivers/clk/davinci/psc-dm355.c
index 128e7345b20c..ddd250107c4e 100644
--- a/drivers/clk/davinci/psc-dm355.c
+++ b/drivers/clk/davinci/psc-dm355.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
@@ -68,7 +69,7 @@ static const struct davinci_lpsc_clk_info dm355_psc_info[] = {
{ }
};
-static int dm355_psc_init(struct device *dev, void __iomem *base)
+int dm355_psc_init(struct device *dev, void __iomem *base)
{
return davinci_psc_register_clocks(dev, dm355_psc_info, 42, base);
}
diff --git a/drivers/clk/davinci/psc-dm365.c b/drivers/clk/davinci/psc-dm365.c
index 289af3913fb0..8c73086cc676 100644
--- a/drivers/clk/davinci/psc-dm365.c
+++ b/drivers/clk/davinci/psc-dm365.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
@@ -86,7 +87,7 @@ static const struct davinci_lpsc_clk_info dm365_psc_info[] = {
{ }
};
-static int dm365_psc_init(struct device *dev, void __iomem *base)
+int dm365_psc_init(struct device *dev, void __iomem *base)
{
return davinci_psc_register_clocks(dev, dm365_psc_info, 52, base);
}
diff --git a/drivers/clk/davinci/psc-dm644x.c b/drivers/clk/davinci/psc-dm644x.c
index c22367baa46f..fc0230e3a3d6 100644
--- a/drivers/clk/davinci/psc-dm644x.c
+++ b/drivers/clk/davinci/psc-dm644x.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
@@ -63,7 +64,7 @@ static const struct davinci_lpsc_clk_info dm644x_psc_info[] = {
{ }
};
-static int dm644x_psc_init(struct device *dev, void __iomem *base)
+int dm644x_psc_init(struct device *dev, void __iomem *base)
{
return davinci_psc_register_clocks(dev, dm644x_psc_info, 41, base);
}
diff --git a/drivers/clk/davinci/psc-dm646x.c b/drivers/clk/davinci/psc-dm646x.c
index 468ef86ea40b..c3f82ed70a80 100644
--- a/drivers/clk/davinci/psc-dm646x.c
+++ b/drivers/clk/davinci/psc-dm646x.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
@@ -58,7 +59,7 @@ static const struct davinci_lpsc_clk_info dm646x_psc_info[] = {
{ }
};
-static int dm646x_psc_init(struct device *dev, void __iomem *base)
+int dm646x_psc_init(struct device *dev, void __iomem *base)
{
return davinci_psc_register_clocks(dev, dm646x_psc_info, 46, base);
}
diff --git a/drivers/clk/davinci/psc.c b/drivers/clk/davinci/psc.c
index ce170e600f09..6326ba1fe3cc 100644
--- a/drivers/clk/davinci/psc.c
+++ b/drivers/clk/davinci/psc.c
@@ -15,6 +15,7 @@
#include <linux/clk-provider.h>
#include <linux/clk.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/of_address.h>
@@ -63,7 +64,7 @@ struct davinci_psc_data {
/**
* struct davinci_lpsc_clk - LPSC clock structure
- * @dev: the device that provides this LPSC
+ * @dev: the device that provides this LPSC or NULL
* @hw: clk_hw for the LPSC
* @pm_domain: power domain for the LPSC
* @genpd_clk: clock reference owned by @pm_domain
@@ -221,6 +222,7 @@ static void davinci_psc_genpd_detach_dev(struct generic_pm_domain *pm_domain,
/**
* davinci_lpsc_clk_register - register LPSC clock
+ * @dev: the clocks's device or NULL
* @name: name of this clock
* @parent_name: name of clock's parent
* @regmap: PSC MMIO region
@@ -238,7 +240,7 @@ davinci_lpsc_clk_register(struct device *dev, const char *name,
int ret;
bool is_on;
- lpsc = devm_kzalloc(dev, sizeof(*lpsc), GFP_KERNEL);
+ lpsc = kzalloc(sizeof(*lpsc), GFP_KERNEL);
if (!lpsc)
return ERR_PTR(-ENOMEM);
@@ -261,9 +263,15 @@ davinci_lpsc_clk_register(struct device *dev, const char *name,
lpsc->pd = pd;
lpsc->flags = flags;
- ret = devm_clk_hw_register(dev, &lpsc->hw);
- if (ret < 0)
+ ret = clk_hw_register(dev, &lpsc->hw);
+ if (ret < 0) {
+ kfree(lpsc);
return ERR_PTR(ret);
+ }
+
+ /* for now, genpd is only registered when using device-tree */
+ if (!dev || !dev->of_node)
+ return lpsc;
/* genpd attach needs a way to look up this clock */
ret = clk_hw_register_clkdev(&lpsc->hw, name, best_dev_name(dev));
@@ -378,13 +386,15 @@ __davinci_psc_register_clocks(struct device *dev,
struct regmap *regmap;
int i, ret;
- psc = devm_kzalloc(dev, sizeof(*psc), GFP_KERNEL);
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
if (!psc)
return ERR_PTR(-ENOMEM);
- clks = devm_kmalloc_array(dev, num_clks, sizeof(*clks), GFP_KERNEL);
- if (!clks)
- return ERR_PTR(-ENOMEM);
+ clks = kmalloc_array(num_clks, sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ ret = -ENOMEM;
+ goto err_free_psc;
+ }
psc->clk_data.clks = clks;
psc->clk_data.clk_num = num_clks;
@@ -396,16 +406,20 @@ __davinci_psc_register_clocks(struct device *dev,
for (i = 0; i < num_clks; i++)
clks[i] = ERR_PTR(-ENOENT);
- pm_domains = devm_kcalloc(dev, num_clks, sizeof(*pm_domains), GFP_KERNEL);
- if (!pm_domains)
- return ERR_PTR(-ENOMEM);
+ pm_domains = kcalloc(num_clks, sizeof(*pm_domains), GFP_KERNEL);
+ if (!pm_domains) {
+ ret = -ENOMEM;
+ goto err_free_clks;
+ }
psc->pm_data.domains = pm_domains;
psc->pm_data.num_domains = num_clks;
- regmap = devm_regmap_init_mmio(dev, base, &davinci_psc_regmap_config);
- if (IS_ERR(regmap))
- return ERR_CAST(regmap);
+ regmap = regmap_init_mmio(dev, base, &davinci_psc_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto err_free_pm_domains;
+ }
for (; info->name; info++) {
struct davinci_lpsc_clk *lpsc;
@@ -423,6 +437,13 @@ __davinci_psc_register_clocks(struct device *dev,
pm_domains[info->md] = &lpsc->pm_domain;
}
+ /*
+ * for now, a reset controller is only registered when there is a device
+ * to associate it with.
+ */
+ if (!dev)
+ return psc;
+
psc->rcdev.ops = &davinci_psc_reset_ops;
psc->rcdev.owner = THIS_MODULE;
psc->rcdev.dev = dev;
@@ -436,6 +457,15 @@ __davinci_psc_register_clocks(struct device *dev,
dev_warn(dev, "Failed to register reset controller (%d)\n", ret);
return psc;
+
+err_free_pm_domains:
+ kfree(pm_domains);
+err_free_clks:
+ kfree(clks);
+err_free_psc:
+ kfree(psc);
+
+ return ERR_PTR(ret);
}
int davinci_psc_register_clocks(struct device *dev,
diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h
index ebdd9df1c0ef..62764c5cc86e 100644
--- a/include/linux/clk/davinci.h
+++ b/include/linux/clk/davinci.h
@@ -21,4 +21,9 @@ int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgch
int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+int dm355_psc_init(struct device *dev, void __iomem *base);
+int dm365_psc_init(struct device *dev, void __iomem *base);
+int dm644x_psc_init(struct device *dev, void __iomem *base);
+int dm646x_psc_init(struct device *dev, void __iomem *base);
+
#endif /* __LINUX_CLK_DAVINCI_PLL_H___ */
--
2.17.0
PLL0 on davinci/da850-type device needs to be registered early in boot
because it is needed for clocksource/clockevent. Change the driver
to use CLK_OF_DECLARE for this special case.
Reviewed-by: Sekhar Nori <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- removed duplicate warning message
v9 changes:
- new patch in v9
drivers/clk/davinci/pll-da850.c | 21 +++++++++++++++++----
drivers/clk/davinci/pll.c | 4 +++-
drivers/clk/davinci/pll.h | 2 +-
3 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/davinci/pll-da850.c b/drivers/clk/davinci/pll-da850.c
index 59cc2e3733f9..0f7198191ea2 100644
--- a/drivers/clk/davinci/pll-da850.c
+++ b/drivers/clk/davinci/pll-da850.c
@@ -13,6 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/types.h>
@@ -136,11 +138,22 @@ static const struct davinci_pll_sysclk_info *da850_pll0_sysclk_info[] = {
NULL
};
-int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
+void of_da850_pll0_init(struct device_node *node)
{
- return of_davinci_pll_init(dev, dev->of_node, &da850_pll0_info,
- &da850_pll0_obsclk_info,
- da850_pll0_sysclk_info, 7, base, cfgchip);
+ void __iomem *base;
+ struct regmap *cfgchip;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ cfgchip = syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
+
+ of_davinci_pll_init(NULL, node, &da850_pll0_info,
+ &da850_pll0_obsclk_info,
+ da850_pll0_sysclk_info, 7, base, cfgchip);
}
static const struct davinci_pll_clk_info da850_pll1_info = {
diff --git a/drivers/clk/davinci/pll.c b/drivers/clk/davinci/pll.c
index ae5f966b503f..8dc9854d44dd 100644
--- a/drivers/clk/davinci/pll.c
+++ b/drivers/clk/davinci/pll.c
@@ -857,8 +857,10 @@ static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *de
return pdata;
}
+/* needed in early boot for clocksource/clockevent */
+CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init);
+
static const struct of_device_id davinci_pll_of_match[] = {
- { .compatible = "ti,da850-pll0", .data = of_da850_pll0_init },
{ .compatible = "ti,da850-pll1", .data = of_da850_pll1_init },
{ }
};
diff --git a/drivers/clk/davinci/pll.h b/drivers/clk/davinci/pll.h
index 562652fc0759..b2e5c4496645 100644
--- a/drivers/clk/davinci/pll.h
+++ b/drivers/clk/davinci/pll.h
@@ -123,7 +123,7 @@ int of_davinci_pll_init(struct device *dev, struct device_node *node,
/* Platform-specific callbacks */
int da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
-int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+void of_da850_pll0_init(struct device_node *node);
int of_da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
int dm355_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
--
2.17.0
This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.
Reviewed-by: Sekhar Nori <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL in da850_init_time() instead of as platform device so that we
get the correct timer0 clock for davinci_timer_init()
v8 changes:
- add platform data for PLL clocks
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- clkdev lookup is moved to drivers/clk
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
- add async1 and async2 clock domains
arch/arm/mach-davinci/board-da850-evm.c | 2 +
arch/arm/mach-davinci/board-mityomapl138.c | 2 +
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +
arch/arm/mach-davinci/da850.c | 155 ++++++++++++++++++--
arch/arm/mach-davinci/da8xx-dt.c | 2 +
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
6 files changed, 151 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..442c16773f09 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1340,6 +1340,8 @@ static __init void da850_evm_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 37b3e48a21d1..2cce0d7d2f2a 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -503,6 +503,8 @@ static void __init mityomapl138_init(void)
{
int ret;
+ da850_register_clocks();
+
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index be8b892a6ea7..7653e9425d44 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -285,6 +285,8 @@ static __init void omapl138_hawk_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 1dbf01c4124b..9e00beb943c9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,39 +11,45 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
+#include <linux/platform_data/clk-davinci-pll.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
-#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
#include <mach/pm.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
-#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
-
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -583,6 +589,7 @@ static struct clk_lookup da850_clks[] = {
CLK("ecap.2", "fck", &ecap2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1170,6 +1177,7 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
+#ifndef CONFIG_COMMON_CLK
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int ret = 0, diff;
@@ -1232,12 +1240,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
return 0;
}
+#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
@@ -1252,6 +1262,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
+#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1395,6 +1406,124 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0;
+ struct regmap *cfgchip;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ cfgchip = da8xx_get_cfgchip();
+
+ da850_pll0_init(NULL, pll0, cfgchip);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(da850_clks);
davinci_timer_init(&timerp64_0_clk);
+#endif
+}
+
+static struct resource da850_pll1_resources[] = {
+ {
+ .start = DA850_PLL1_BASE,
+ .end = DA850_PLL1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct davinci_pll_platform_data da850_pll1_pdata;
+
+static struct platform_device da850_pll1_device = {
+ .name = "da850-pll1",
+ .id = -1,
+ .resource = da850_pll1_resources,
+ .num_resources = ARRAY_SIZE(da850_pll1_resources),
+ .dev = {
+ .platform_data = &da850_pll1_pdata,
+ },
+};
+
+static struct resource da850_psc0_resources[] = {
+ {
+ .start = DA8XX_PSC0_BASE,
+ .end = DA8XX_PSC0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc0_device = {
+ .name = "da850-psc0",
+ .id = -1,
+ .resource = da850_psc0_resources,
+ .num_resources = ARRAY_SIZE(da850_psc0_resources),
+};
+
+static struct resource da850_psc1_resources[] = {
+ {
+ .start = DA8XX_PSC1_BASE,
+ .end = DA8XX_PSC1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc1_device = {
+ .name = "da850-psc1",
+ .id = -1,
+ .resource = da850_psc1_resources,
+ .num_resources = ARRAY_SIZE(da850_psc1_resources),
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
+
+static struct platform_device da850_async1_clksrc_device = {
+ .name = "da850-async1-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async1_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
+
+static struct platform_device da850_async3_clksrc_device = {
+ .name = "da850-async3-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async3_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
+
+static struct platform_device da850_tbclksync_device = {
+ .name = "da830-tbclksync",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_tbclksync_pdata,
+ },
+};
+
+void __init da850_register_clocks(void)
+{
+ /* PLL0 is registered in da850_init_time() */
+
+ da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_pll1_device);
+
+ da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async1_clksrc_device);
+
+ da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async3_clksrc_device);
+
+ platform_device_register(&da850_psc0_device);
+
+ platform_device_register(&da850_psc1_device);
+
+ da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_tbclksync_device);
}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index ab199f4b9ce4..91dd9cb6d113 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -67,6 +67,8 @@ static void __init da850_init_machine(void)
int ret;
+ da850_register_clocks();
+
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 64861ac6a9d4..612e45437cec 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -93,6 +93,7 @@ void da830_register_clocks(void);
void da850_init(void);
void da850_init_time(void);
+void da850_register_clocks(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
--
2.17.0
This adds the new board-specific clock init in mach-davinci/da830.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Reviewed-by: Sekhar Nori <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL in da830_init_time() instead of as platform device so that we
get the correct timer0 clock for davinci_timer_init()
v8 changes:
- none
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- clkdev lookup is moved to drivers/clk
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
arch/arm/mach-davinci/board-da830-evm.c | 2 +
arch/arm/mach-davinci/da830.c | 70 ++++++++++++++++++++--
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
3 files changed, 67 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 14a6fc061744..74df37821abe 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -557,6 +557,8 @@ static __init void da830_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
+ da830_register_clocks();
+
ret = da830_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 0b17e5a22e5e..8a79e245db1f 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,23 +8,27 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
+#include <mach/cputype.h>
#include <mach/da8xx.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
/* Offsets of the 8 compare registers on the da830 */
#define DA830_CMP12_0 0x60
#define DA830_CMP12_1 0x64
@@ -37,6 +41,7 @@
#define DA830_REF_FREQ 24000000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA8XX_PLL0_BASE,
@@ -432,6 +437,7 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "rmii", &rmii_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1223,6 +1229,58 @@ void __init da830_init(void)
void __init da830_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ);
+
+ pll = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+
+ da830_pll_init(NULL, pll, NULL);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(da830_clks);
davinci_timer_init(&timerp64_0_clk);
+#endif
+}
+
+static struct resource da830_psc0_resources[] = {
+ {
+ .start = DA8XX_PSC0_BASE,
+ .end = DA8XX_PSC0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da830_psc0_device = {
+ .name = "da830-psc0",
+ .id = -1,
+ .resource = da830_psc0_resources,
+ .num_resources = ARRAY_SIZE(da830_psc0_resources),
+};
+
+static struct resource da830_psc1_resources[] = {
+ {
+ .start = DA8XX_PSC1_BASE,
+ .end = DA8XX_PSC1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da830_psc1_device = {
+ .name = "da830-psc1",
+ .id = -1,
+ .resource = da830_psc1_resources,
+ .num_resources = ARRAY_SIZE(da830_psc1_resources),
+};
+
+void __init da830_register_clocks(void)
+{
+ /* PLL is registered in da830_init_time() */
+ platform_device_register(&da830_psc0_device);
+ platform_device_register(&da830_psc1_device);
}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 9fd6d0125762..64861ac6a9d4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -89,6 +89,7 @@ extern unsigned int da850_max_speed;
void da830_init(void);
void da830_init_time(void);
+void da830_register_clocks(void);
void da850_init(void);
void da850_init_time(void);
--
2.17.0
On Friday 18 May 2018 10:18 PM, David Lechner wrote:
> @@ -711,11 +777,11 @@ int of_davinci_pll_init(struct device *dev,
> int n_clks = max_sysclk_id + 1;
> int i;
>
> - clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
> + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
> if (!clk_data)
> return -ENOMEM;
>
> - clks = devm_kmalloc_array(dev, n_clks, sizeof(*clks), GFP_KERNEL);
> + clks = kmalloc_array(n_clks, sizeof(*clks), GFP_KERNEL);
> if (!clks)
> return -ENOMEM;
This should be:
if (!clks) {
kfree(clk_data);
return -ENOMEM;
}
With that fixed:
Reviewed-by: Sekhar Nori <[email protected]>
Thanks,
Sekhar
On Friday 18 May 2018 10:18 PM, David Lechner wrote:
> On some davinci SoCs, we need to register the PSC clocks during early
> boot because they are needed for clocksource/clockevent. These changes
> allow for dev == NULL because in this case, we won't have a platform
> device for the clocks.
>
> Some function declarations are moved to a public header files so that they can
> be called from mach init code.
>
> Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sekhar Nori <[email protected]>
Thanks,
Sekhar
Hi David,
On Friday 18 May 2018 10:18 PM, David Lechner wrote:
> This series converts mach-davinci to use the common clock framework.
>
> The series works like this, the first 3 patches fix some issues with the clock
> drivers that have already been accepted into the mainline kernel.
>
> Then, starting with "ARM: davinci: pass clock as parameter to
> davinci_timer_init()", we get the mach code ready for the switch by adding the
> code needed for the new clock drivers and adding #ifndef CONFIG_COMMON_CLK
> around the legacy clocks so that we can switch easily between the old and the
> new.
>
> "ARM: davinci: switch to common clock framework" actually flips the switch
> to start using the new clock drivers. Then the next 8 patches remove all
> of the old clock code.
>
> The final four patches add device tree clock support to the one SoC that
> supports it.
>
> This series has been tested on TI OMAP-L138 LCDK (both device tree and legacy
> board file).
If you do end up sending a v12, you can leave out the mach-davinci
portions unless there are any changes you need to make. I will pick them
up from this series once the driver dependencies are merged.
I do hope the drivers/clk/* changes can be merged from v4.18.
Thanks,
Sekhar
On 05/22/2018 04:38 AM, Sekhar Nori wrote:
> Hi David,
>
> On Friday 18 May 2018 10:18 PM, David Lechner wrote:
>> This series converts mach-davinci to use the common clock framework.
>>
>> The series works like this, the first 3 patches fix some issues with the clock
>> drivers that have already been accepted into the mainline kernel.
>>
>> Then, starting with "ARM: davinci: pass clock as parameter to
>> davinci_timer_init()", we get the mach code ready for the switch by adding the
>> code needed for the new clock drivers and adding #ifndef CONFIG_COMMON_CLK
>> around the legacy clocks so that we can switch easily between the old and the
>> new.
>>
>> "ARM: davinci: switch to common clock framework" actually flips the switch
>> to start using the new clock drivers. Then the next 8 patches remove all
>> of the old clock code.
>>
>> The final four patches add device tree clock support to the one SoC that
>> supports it.
>>
>> This series has been tested on TI OMAP-L138 LCDK (both device tree and legacy
>> board file).
>
> If you do end up sending a v12, you can leave out the mach-davinci
> portions unless there are any changes you need to make. I will pick them
> up from this series once the driver dependencies are merged.
>
> I do hope the drivers/clk/* changes can be merged from v4.18.
>
I have resent all of the clk patches (including all of the ones I listed as
dependencies in addition to the three remaining in this series) under the
cover "clk: davinci: outstanding fixes".
I also found that we need to add power-domains properties to the PWM nodes
in "ARM: dts: da850: Add clocks". I probably should just take your advice
and just globally added them even if they are not documented for some types
ofnodes.
Hi Sekhar,
On 05/22/2018 04:38 AM, Sekhar Nori wrote:
> Hi David,
>
> On Friday 18 May 2018 10:18 PM, David Lechner wrote:
>> This series converts mach-davinci to use the common clock framework.
>>
>> The series works like this, the first 3 patches fix some issues with the clock
>> drivers that have already been accepted into the mainline kernel.
>>
>> Then, starting with "ARM: davinci: pass clock as parameter to
>> davinci_timer_init()", we get the mach code ready for the switch by adding the
>> code needed for the new clock drivers and adding #ifndef CONFIG_COMMON_CLK
>> around the legacy clocks so that we can switch easily between the old and the
>> new.
>>
>> "ARM: davinci: switch to common clock framework" actually flips the switch
>> to start using the new clock drivers. Then the next 8 patches remove all
>> of the old clock code.
>>
>> The final four patches add device tree clock support to the one SoC that
>> supports it.
>>
>> This series has been tested on TI OMAP-L138 LCDK (both device tree and legacy
>> board file).
>
> If you do end up sending a v12, you can leave out the mach-davinci
> portions unless there are any changes you need to make. I will pick them
> up from this series once the driver dependencies are merged.
>
> I do hope the drivers/clk/* changes can be merged from v4.18.
>
> Thanks,
> Sekhar
>
Are you going to pick up the arch patches from this series now that
the 4.18 merge window is closed?
All of the clk patches landed in 4.18.
Hi David,
On Sunday 17 June 2018 09:18 PM, David Lechner wrote:
> Hi Sekhar,
>
> On 05/22/2018 04:38 AM, Sekhar Nori wrote:
>> Hi David,
>>
>> On Friday 18 May 2018 10:18 PM, David Lechner wrote:
>>> This series converts mach-davinci to use the common clock framework.
>>>
>>> The series works like this, the first 3 patches fix some issues with
>>> the clock
>>> drivers that have already been accepted into the mainline kernel.
>>>
>>> Then, starting with "ARM: davinci: pass clock as parameter to
>>> davinci_timer_init()", we get the mach code ready for the switch by
>>> adding the
>>> code needed for the new clock drivers and adding #ifndef
>>> CONFIG_COMMON_CLK
>>> around the legacy clocks so that we can switch easily between the old
>>> and the
>>> new.
>>>
>>> "ARM: davinci: switch to common clock framework" actually flips the
>>> switch
>>> to start using the new clock drivers. Then the next 8 patches remove all
>>> of the old clock code.
>>>
>>> The final four patches add device tree clock support to the one SoC that
>>> supports it.
>>>
>>> This series has been tested on TI OMAP-L138 LCDK (both device tree
>>> and legacy
>>> board file).
>>
>> If you do end up sending a v12, you can leave out the mach-davinci
>> portions unless there are any changes you need to make. I will pick them
>> up from this series once the driver dependencies are merged.
>>
>> I do hope the drivers/clk/* changes can be merged from v4.18.
>>
>> Thanks,
>> Sekhar
>>
>
> Are you going to pick up the arch patches from this series now that
> the 4.18 merge window is closed?
>
> All of the clk patches landed in 4.18.
yes!
Thanks,
Sekhar
On Friday 25 May 2018 11:51 PM, David Lechner wrote:
> On 05/22/2018 04:38 AM, Sekhar Nori wrote:
>> Hi David,
>>
>> On Friday 18 May 2018 10:18 PM, David Lechner wrote:
>>> This series converts mach-davinci to use the common clock framework.
>>>
>>> The series works like this, the first 3 patches fix some issues with
>>> the clock
>>> drivers that have already been accepted into the mainline kernel.
>>>
>>> Then, starting with "ARM: davinci: pass clock as parameter to
>>> davinci_timer_init()", we get the mach code ready for the switch by
>>> adding the
>>> code needed for the new clock drivers and adding #ifndef
>>> CONFIG_COMMON_CLK
>>> around the legacy clocks so that we can switch easily between the old
>>> and the
>>> new.
>>>
>>> "ARM: davinci: switch to common clock framework" actually flips the
>>> switch
>>> to start using the new clock drivers. Then the next 8 patches remove all
>>> of the old clock code.
>>>
>>> The final four patches add device tree clock support to the one SoC that
>>> supports it.
>>>
>>> This series has been tested on TI OMAP-L138 LCDK (both device tree
>>> and legacy
>>> board file).
>>
>> If you do end up sending a v12, you can leave out the mach-davinci
>> portions unless there are any changes you need to make. I will pick them
>> up from this series once the driver dependencies are merged.
>>
>> I do hope the drivers/clk/* changes can be merged from v4.18.
>>
>
> I have resent all of the clk patches (including all of the ones I listed as
> dependencies in addition to the three remaining in this series) under the
> cover "clk: davinci: outstanding fixes".
>
> I also found that we need to add power-domains properties to the PWM nodes
> in "ARM: dts: da850: Add clocks". I probably should just take your advice
> and just globally added them even if they are not documented for some types
> ofnodes.
I think doing it en masse will be controversial. Just add it to PWM
nodes for now (I am assuming the binding documentation agrees).
I have applied this series so please send any more changes as follow-on
patches.
Thanks
Sekhar
On 06/26/2018 07:56 AM, Sekhar Nori wrote:
> On Friday 25 May 2018 11:51 PM, David Lechner wrote:
>> On 05/22/2018 04:38 AM, Sekhar Nori wrote:
>>> Hi David,
>>>
>>> On Friday 18 May 2018 10:18 PM, David Lechner wrote:
>>>> This series converts mach-davinci to use the common clock framework.
>>>>
>>>> The series works like this, the first 3 patches fix some issues with
>>>> the clock
>>>> drivers that have already been accepted into the mainline kernel.
>>>>
>>>> Then, starting with "ARM: davinci: pass clock as parameter to
>>>> davinci_timer_init()", we get the mach code ready for the switch by
>>>> adding the
>>>> code needed for the new clock drivers and adding #ifndef
>>>> CONFIG_COMMON_CLK
>>>> around the legacy clocks so that we can switch easily between the old
>>>> and the
>>>> new.
>>>>
>>>> "ARM: davinci: switch to common clock framework" actually flips the
>>>> switch
>>>> to start using the new clock drivers. Then the next 8 patches remove all
>>>> of the old clock code.
>>>>
>>>> The final four patches add device tree clock support to the one SoC that
>>>> supports it.
>>>>
>>>> This series has been tested on TI OMAP-L138 LCDK (both device tree
>>>> and legacy
>>>> board file).
>>>
>>> If you do end up sending a v12, you can leave out the mach-davinci
>>> portions unless there are any changes you need to make. I will pick them
>>> up from this series once the driver dependencies are merged.
>>>
>>> I do hope the drivers/clk/* changes can be merged from v4.18.
>>>
>>
>> I have resent all of the clk patches (including all of the ones I listed as
>> dependencies in addition to the three remaining in this series) under the
>> cover "clk: davinci: outstanding fixes".
>>
>> I also found that we need to add power-domains properties to the PWM nodes
>> in "ARM: dts: da850: Add clocks". I probably should just take your advice
>> and just globally added them even if they are not documented for some types
>> ofnodes.
>
> I think doing it en masse will be controversial. Just add it to PWM
> nodes for now (I am assuming the binding documentation agrees).
>
> I have applied this series so please send any more changes as follow-on
> patches.
>
> Thanks
> Sekhar
>
FYI, there are some CPU frequency scaling patches that I was playing around
with, but I don't plan on submitting them since they aren't much use to me
at the moment. If anyone would like to pick them up, you can find them at
https://github.com/dlech/linux/tree/da850-dt-cpufreq.