Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm
instead of omap-pcm") resulted in broken audio playback on OMAP1510
(discovered on Amstrad Delta).
When running on OMAP1510, omap-pcm used to obtain DMA offset from
snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
software calculations instead of snd_dmaengine_pcm_pointer() which
depended on residue value calculated from omap_dma_get_src_pos().
Similar code path is still available in now used
sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.
It was verified already before that omap_get_dma_src_pos() from
arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
callback") for details. Apparently the same applies to its successor,
omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.
On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
as depreciated and discouraged for use in new drivers because of its
unreliable accuracy. However, it seems the only working option for
OPAM1510 now, as long as a software calculated residue is not
implemented as OMAP1510 fallback in omap-dma.
Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
can be triggered in two ways:
- by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
sound/soc/omap/sdma-pcm.c,
- by passing dma_caps.residue_granularity =
DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.
Let's do the latter.
Created and tested against next-20180531 tag from linux-next tree.
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
---
Changelog:
v2: fix subject as requested by Peter.
drivers/dma/ti/omap-dma.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index b73fb51fbc81..96b5096c26dd 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -1485,7 +1485,11 @@ static int omap_dma_probe(struct platform_device *pdev)
od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ if (__dma_omap15xx(od->plat->dma_attr))
+ od->ddev.residue_granularity =
+ DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ else
+ od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
--
2.16.1
On 05-06-18, 18:59, Janusz Krzysztofik wrote:
> Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm
> instead of omap-pcm") resulted in broken audio playback on OMAP1510
> (discovered on Amstrad Delta).
>
> When running on OMAP1510, omap-pcm used to obtain DMA offset from
> snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
> software calculations instead of snd_dmaengine_pcm_pointer() which
> depended on residue value calculated from omap_dma_get_src_pos().
> Similar code path is still available in now used
> sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.
>
> It was verified already before that omap_get_dma_src_pos() from
> arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
> commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
> callback") for details. Apparently the same applies to its successor,
> omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.
>
> On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
> as depreciated and discouraged for use in new drivers because of its
> unreliable accuracy. However, it seems the only working option for
> OPAM1510 now, as long as a software calculated residue is not
> implemented as OMAP1510 fallback in omap-dma.
>
> Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
> snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
> can be triggered in two ways:
> - by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
> sound/soc/omap/sdma-pcm.c,
> - by passing dma_caps.residue_granularity =
> DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.
>
> Let's do the latter.
>
> Created and tested against next-20180531 tag from linux-next tree.
This is not useful for log.
I have stripped this and applied
--
~Vinod