Some devices require a higher TS clock frequency to demodulate some
muxes. This adds two optional parameters to control the TS clock
frequency mode as well as the frequency.
Signed-off-by: Thomas Hollstegge <[email protected]>
---
drivers/media/dvb-frontends/si2168.c | 20 +++++++++++++++++++-
drivers/media/dvb-frontends/si2168.h | 8 ++++++++
drivers/media/dvb-frontends/si2168_priv.h | 2 ++
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
index 324493e..b05e677 100644
--- a/drivers/media/dvb-frontends/si2168.c
+++ b/drivers/media/dvb-frontends/si2168.c
@@ -92,13 +92,15 @@ static int si2168_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
dev_dbg(&client->dev, "%s acquire: %d\n", __func__, acquire);
/* set TS_MODE property */
- memcpy(cmd.args, "\x14\x00\x01\x10\x10\x00", 6);
+ memcpy(cmd.args, "\x14\x00\x01\x10\x00\x00", 6);
if (acquire)
cmd.args[4] |= dev->ts_mode;
else
cmd.args[4] |= SI2168_TS_TRISTATE;
if (dev->ts_clock_gapped)
cmd.args[4] |= 0x40;
+ cmd.args[4] |= (dev->ts_clock_mode & 0x03) << 4;
+
cmd.wlen = 6;
cmd.rlen = 4;
ret = si2168_cmd_execute(client, &cmd);
@@ -398,6 +400,18 @@ static int si2168_set_frontend(struct dvb_frontend *fe)
if (ret)
goto err;
+ /* set TS frequency */
+ if (dev->ts_clock_freq) {
+ memcpy(cmd.args, "\x14\x00\x0d\x10", 4);
+ cmd.args[4] = ((dev->ts_clock_freq / 10000) >> 0) & 0xff;
+ cmd.args[5] = ((dev->ts_clock_freq / 10000) >> 8) & 0xff;
+ cmd.wlen = 6;
+ cmd.rlen = 4;
+ ret = si2168_cmd_execute(client, &cmd);
+ if (ret)
+ goto err;
+ }
+
memcpy(cmd.args, "\x14\x00\x08\x10\xd7\x05", 6);
cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10;
cmd.wlen = 6;
@@ -806,6 +820,10 @@ static int si2168_probe(struct i2c_client *client,
dev->ts_mode = config->ts_mode;
dev->ts_clock_inv = config->ts_clock_inv;
dev->ts_clock_gapped = config->ts_clock_gapped;
+ dev->ts_clock_mode = config->ts_clock_mode;
+ if (dev->ts_clock_mode == 0)
+ dev->ts_clock_mode = SI2168_TS_CLOCK_MODE_AUTO_ADAPT;
+ dev->ts_clock_freq = config->ts_clock_freq;
dev->spectral_inversion = config->spectral_inversion;
dev_info(&client->dev, "Silicon Labs Si2168-%c%d%d successfully identified\n",
diff --git a/drivers/media/dvb-frontends/si2168.h b/drivers/media/dvb-frontends/si2168.h
index d519edd..3f52ee8 100644
--- a/drivers/media/dvb-frontends/si2168.h
+++ b/drivers/media/dvb-frontends/si2168.h
@@ -47,6 +47,14 @@ struct si2168_config {
/* TS clock gapped */
bool ts_clock_gapped;
+ /* TS clock mode */
+#define SI2168_TS_CLOCK_MODE_AUTO_ADAPT 0x01
+#define SI2168_TS_CLOCK_MODE_MANUAL 0x02
+ u8 ts_clock_mode;
+
+ /* TS clock frequency (for manual mode) */
+ u32 ts_clock_freq;
+
/* Inverted spectrum */
bool spectral_inversion;
};
diff --git a/drivers/media/dvb-frontends/si2168_priv.h b/drivers/media/dvb-frontends/si2168_priv.h
index 2d362e1..8173d6c 100644
--- a/drivers/media/dvb-frontends/si2168_priv.h
+++ b/drivers/media/dvb-frontends/si2168_priv.h
@@ -48,6 +48,8 @@ struct si2168_dev {
u8 ts_mode;
bool ts_clock_inv;
bool ts_clock_gapped;
+ u8 ts_clock_mode;
+ u32 ts_clock_freq;
bool spectral_inversion;
};
--
2.7.4
Em Sat, 12 May 2018 20:24:58 +0200
Thomas Hollstegge <[email protected]> escreveu:
> Some devices require a higher TS clock frequency to demodulate some
> muxes. This adds two optional parameters to control the TS clock
> frequency mode as well as the frequency.
>
> Signed-off-by: Thomas Hollstegge <[email protected]>
> ---
> drivers/media/dvb-frontends/si2168.c | 20 +++++++++++++++++++-
> drivers/media/dvb-frontends/si2168.h | 8 ++++++++
> drivers/media/dvb-frontends/si2168_priv.h | 2 ++
> 3 files changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
> index 324493e..b05e677 100644
> --- a/drivers/media/dvb-frontends/si2168.c
> +++ b/drivers/media/dvb-frontends/si2168.c
> @@ -92,13 +92,15 @@ static int si2168_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
> dev_dbg(&client->dev, "%s acquire: %d\n", __func__, acquire);
>
> /* set TS_MODE property */
> - memcpy(cmd.args, "\x14\x00\x01\x10\x10\x00", 6);
> + memcpy(cmd.args, "\x14\x00\x01\x10\x00\x00", 6);
> if (acquire)
> cmd.args[4] |= dev->ts_mode;
> else
> cmd.args[4] |= SI2168_TS_TRISTATE;
> if (dev->ts_clock_gapped)
> cmd.args[4] |= 0x40;
> + cmd.args[4] |= (dev->ts_clock_mode & 0x03) << 4;
> +
Hmm... looking at this patch and on the next one, it seems that the
clock mode is either 1 (AUTO) or 2 (MANUAL), right?
If so, I would just do, instead:
if (dev->ts_clock_freq)
cmd.args[4] = SI2168_TS_CLOCK_MODE_AUTO_ADAPT << 4;
else
cmd.args[4] = SI2168_TS_CLOCK_MODE_MANUAL << 4;
And get rid of dev->ts_clock_mode parameter.
That seems more error-prune, as just specifying ts_clock_freq is
enough for the driver to do the right thing.
> cmd.wlen = 6;
> cmd.rlen = 4;
> ret = si2168_cmd_execute(client, &cmd);
> @@ -398,6 +400,18 @@ static int si2168_set_frontend(struct dvb_frontend *fe)
> if (ret)
> goto err;
>
> + /* set TS frequency */
> + if (dev->ts_clock_freq) {
> + memcpy(cmd.args, "\x14\x00\x0d\x10", 4);
> + cmd.args[4] = ((dev->ts_clock_freq / 10000) >> 0) & 0xff;
> + cmd.args[5] = ((dev->ts_clock_freq / 10000) >> 8) & 0xff;
> + cmd.wlen = 6;
> + cmd.rlen = 4;
> + ret = si2168_cmd_execute(client, &cmd);
> + if (ret)
> + goto err;
> + }
> +
> memcpy(cmd.args, "\x14\x00\x08\x10\xd7\x05", 6);
> cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10;
> cmd.wlen = 6;
> @@ -806,6 +820,10 @@ static int si2168_probe(struct i2c_client *client,
> dev->ts_mode = config->ts_mode;
> dev->ts_clock_inv = config->ts_clock_inv;
> dev->ts_clock_gapped = config->ts_clock_gapped;
> + dev->ts_clock_mode = config->ts_clock_mode;
> + if (dev->ts_clock_mode == 0)
> + dev->ts_clock_mode = SI2168_TS_CLOCK_MODE_AUTO_ADAPT;
> + dev->ts_clock_freq = config->ts_clock_freq;
> dev->spectral_inversion = config->spectral_inversion;
>
> dev_info(&client->dev, "Silicon Labs Si2168-%c%d%d successfully identified\n",
> diff --git a/drivers/media/dvb-frontends/si2168.h b/drivers/media/dvb-frontends/si2168.h
> index d519edd..3f52ee8 100644
> --- a/drivers/media/dvb-frontends/si2168.h
> +++ b/drivers/media/dvb-frontends/si2168.h
> @@ -47,6 +47,14 @@ struct si2168_config {
> /* TS clock gapped */
> bool ts_clock_gapped;
>
> + /* TS clock mode */
> +#define SI2168_TS_CLOCK_MODE_AUTO_ADAPT 0x01
> +#define SI2168_TS_CLOCK_MODE_MANUAL 0x02
> + u8 ts_clock_mode;
> +
> + /* TS clock frequency (for manual mode) */
> + u32 ts_clock_freq;
> +
> /* Inverted spectrum */
> bool spectral_inversion;
> };
> diff --git a/drivers/media/dvb-frontends/si2168_priv.h b/drivers/media/dvb-frontends/si2168_priv.h
> index 2d362e1..8173d6c 100644
> --- a/drivers/media/dvb-frontends/si2168_priv.h
> +++ b/drivers/media/dvb-frontends/si2168_priv.h
> @@ -48,6 +48,8 @@ struct si2168_dev {
> u8 ts_mode;
> bool ts_clock_inv;
> bool ts_clock_gapped;
> + u8 ts_clock_mode;
> + u32 ts_clock_freq;
> bool spectral_inversion;
> };
>
Thanks,
Mauro