Signed-off-by: Ryan Lee <[email protected]>
---
Changes : Sort 'max98373_digital_tlv' in reverse order.
Fixed wrong use case of 'TLV_DB_SCALE_ITEM' - TLV_DB_SCALE_ITEM(min, step, mute)
Max value was set in min field and negative value was set in step field before.
sound/soc/codecs/max98373.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 1093f76..bb5ef52 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -454,7 +454,7 @@ SND_SOC_DAPM_SIGGEN("IMON"),
SND_SOC_DAPM_SIGGEN("FBMON"),
};
-static DECLARE_TLV_DB_SCALE(max98373_digital_tlv, 0, -50, 0);
+static DECLARE_TLV_DB_SCALE(max98373_digital_tlv, -6350, 50, 1);
static const DECLARE_TLV_DB_RANGE(max98373_spk_tlv,
0, 8, TLV_DB_SCALE_ITEM(0, 50, 0),
9, 10, TLV_DB_SCALE_ITEM(500, 100, 0),
@@ -604,7 +604,7 @@ SOC_SINGLE("Dither Switch", MAX98373_R203F_AMP_DSP_CFG,
SOC_SINGLE("DC Blocker Switch", MAX98373_R203F_AMP_DSP_CFG,
MAX98373_AMP_DSP_CFG_DCBLK_SHIFT, 1, 0),
SOC_SINGLE_TLV("Digital Volume", MAX98373_R203D_AMP_DIG_VOL_CTRL,
- 0, 0x7F, 0, max98373_digital_tlv),
+ 0, 0x7F, 1, max98373_digital_tlv),
SOC_SINGLE_TLV("Speaker Volume", MAX98373_R203E_AMP_PATH_GAIN,
MAX98373_SPK_DIGI_GAIN_SHIFT, 10, 0, max98373_spk_tlv),
SOC_SINGLE_TLV("FS Max Volume", MAX98373_R203E_AMP_PATH_GAIN,
--
2.7.4
Signed-off-by: Ryan Lee <[email protected]>
---
Changes : Sort 'max98373_bde_gain_tlv' in reverse order.
Fixed wrong use case of 'TLV_DB_SCALE_ITEM' - TLV_DB_SCALE_ITEM(min, step, mute)
Max value was set in min field and negative value was set in step field before.
sound/soc/codecs/max98373.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 1f5887b..e9c082c 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -482,7 +482,7 @@ static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
);
static const DECLARE_TLV_DB_RANGE(max98373_bde_gain_tlv,
- 0, 60, TLV_DB_SCALE_ITEM(0, -25, 0),
+ 0, 60, TLV_DB_SCALE_ITEM(-1500, 25, 0),
);
static bool max98373_readable_register(struct device *dev, unsigned int reg)
@@ -653,21 +653,21 @@ SOC_SINGLE("BDE Hold Time", MAX98373_R2090_BDE_LVL_HOLD, 0, 0xFF, 0),
SOC_SINGLE("BDE Attack Rate", MAX98373_R2091_BDE_GAIN_ATK_REL_RATE, 4, 0xF, 0),
SOC_SINGLE("BDE Release Rate", MAX98373_R2091_BDE_GAIN_ATK_REL_RATE, 0, 0xF, 0),
SOC_SINGLE_TLV("BDE LVL1 Clip Thresh Volume", MAX98373_R20A9_BDE_L1_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL2 Clip Thresh Volume", MAX98373_R20AC_BDE_L2_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL3 Clip Thresh Volume", MAX98373_R20AF_BDE_L3_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL4 Clip Thresh Volume", MAX98373_R20B2_BDE_L4_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Clip Reduction Volume", MAX98373_R20AA_BDE_L1_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL2 Clip Reduction Volume", MAX98373_R20AD_BDE_L2_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL3 Clip Reduction Volume", MAX98373_R20B0_BDE_L3_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL4 Clip Reduction Volume", MAX98373_R20B3_BDE_L4_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Limiter Thresh Volume", MAX98373_R20A8_BDE_L1_CFG_1,
0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL2 Limiter Thresh Volume", MAX98373_R20AB_BDE_L2_CFG_1,
--
2.7.4
Signed-off-by: Ryan Lee <[email protected]>
---
Changes : Sort 'max98373_dht_spkgain_min_tlv' in reverse order.
Fixed wrong use case of 'TLV_DB_SCALE_ITEM' - TLV_DB_SCALE_ITEM(min, step, mute)
Max value was set in min field and negative value was set in step field before.
sound/soc/codecs/max98373.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index e9c082c..e75c212 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -470,12 +470,12 @@ static const DECLARE_TLV_DB_RANGE(max98373_dht_spkgain_min_tlv,
0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_dht_rotation_point_tlv,
- 0, 1, TLV_DB_SCALE_ITEM(-50, -50, 0),
- 2, 7, TLV_DB_SCALE_ITEM(-200, -100, 0),
- 8, 9, TLV_DB_SCALE_ITEM(-1000, -200, 0),
- 10, 11, TLV_DB_SCALE_ITEM(-1500, -300, 0),
- 12, 13, TLV_DB_SCALE_ITEM(-2000, -200, 0),
- 14, 15, TLV_DB_SCALE_ITEM(-2500, -500, 0),
+ 0, 1, TLV_DB_SCALE_ITEM(-3000, 500, 0),
+ 2, 4, TLV_DB_SCALE_ITEM(-2200, 200, 0),
+ 5, 6, TLV_DB_SCALE_ITEM(-1500, 300, 0),
+ 7, 9, TLV_DB_SCALE_ITEM(-1000, 200, 0),
+ 10, 13, TLV_DB_SCALE_ITEM(-500, 100, 0),
+ 14, 15, TLV_DB_SCALE_ITEM(-100, 50, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
@@ -616,7 +616,7 @@ SOC_SINGLE("DHT Switch", MAX98373_R20D4_DHT_EN,
SOC_SINGLE_TLV("DHT Min Volume", MAX98373_R20D1_DHT_CFG,
MAX98373_DHT_SPK_GAIN_MIN_SHIFT, 9, 0, max98373_dht_spkgain_min_tlv),
SOC_SINGLE_TLV("DHT Rot Pnt Volume", MAX98373_R20D1_DHT_CFG,
- MAX98373_DHT_ROT_PNT_SHIFT, 15, 0, max98373_dht_rotation_point_tlv),
+ MAX98373_DHT_ROT_PNT_SHIFT, 15, 1, max98373_dht_rotation_point_tlv),
SOC_SINGLE_TLV("DHT Attack Step Volume", MAX98373_R20D2_DHT_ATTACK_CFG,
MAX98373_DHT_ATTACK_STEP_SHIFT, 4, 0, max98373_dht_step_size_tlv),
SOC_SINGLE_TLV("DHT Release Step Volume", MAX98373_R20D3_DHT_RELEASE_CFG,
--
2.7.4
Signed-off-by: Ryan Lee <[email protected]>
---
Changes : Sort 'max98373_limiter_thresh_tlv' in reverse order.
Fixed wrong use case of 'TLV_DB_SCALE_ITEM' - TLV_DB_SCALE_ITEM(min, step, mute)
Max value was set in min field and negative value was set in step field before.
sound/soc/codecs/max98373.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index bb5ef52..1f5887b 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -478,7 +478,7 @@ static const DECLARE_TLV_DB_RANGE(max98373_dht_rotation_point_tlv,
14, 15, TLV_DB_SCALE_ITEM(-2500, -500, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
- 0, 15, TLV_DB_SCALE_ITEM(0, -100, 0),
+ 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_bde_gain_tlv,
@@ -669,13 +669,13 @@ SOC_SINGLE_TLV("BDE LVL3 Clip Reduction Volume", MAX98373_R20B0_BDE_L3_CFG_3,
SOC_SINGLE_TLV("BDE LVL4 Clip Reduction Volume", MAX98373_R20B3_BDE_L4_CFG_3,
0, 0x3C, 0, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Limiter Thresh Volume", MAX98373_R20A8_BDE_L1_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL2 Limiter Thresh Volume", MAX98373_R20AB_BDE_L2_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL3 Limiter Thresh Volume", MAX98373_R20AE_BDE_L3_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL4 Limiter Thresh Volume", MAX98373_R20B1_BDE_L4_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
/* Limiter */
SOC_SINGLE("Limiter Switch", MAX98373_R20E2_LIMITER_EN,
MAX98373_LIMITER_EN_SHIFT, 1, 0),
--
2.7.4
The patch
ASoC: max98373: Sort DHT Rot Pnt Volume in reverse order
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From a23f5dc8448694a0ffe2127a04aa5787b9cf9e5f Mon Sep 17 00:00:00 2001
From: Ryan Lee <[email protected]>
Date: Wed, 10 Oct 2018 23:26:17 +0000
Subject: [PATCH] ASoC: max98373: Sort DHT Rot Pnt Volume in reverse order
Signed-off-by: Ryan Lee <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/max98373.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 37f8bcdd8e35..a09d01318f79 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -471,12 +471,12 @@ static const DECLARE_TLV_DB_RANGE(max98373_dht_spkgain_min_tlv,
0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_dht_rotation_point_tlv,
- 0, 1, TLV_DB_SCALE_ITEM(-50, -50, 0),
- 2, 7, TLV_DB_SCALE_ITEM(-200, -100, 0),
- 8, 9, TLV_DB_SCALE_ITEM(-1000, -200, 0),
- 10, 11, TLV_DB_SCALE_ITEM(-1500, -300, 0),
- 12, 13, TLV_DB_SCALE_ITEM(-2000, -200, 0),
- 14, 15, TLV_DB_SCALE_ITEM(-2500, -500, 0),
+ 0, 1, TLV_DB_SCALE_ITEM(-3000, 500, 0),
+ 2, 4, TLV_DB_SCALE_ITEM(-2200, 200, 0),
+ 5, 6, TLV_DB_SCALE_ITEM(-1500, 300, 0),
+ 7, 9, TLV_DB_SCALE_ITEM(-1000, 200, 0),
+ 10, 13, TLV_DB_SCALE_ITEM(-500, 100, 0),
+ 14, 15, TLV_DB_SCALE_ITEM(-100, 50, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
@@ -617,7 +617,7 @@ SOC_SINGLE("DHT Switch", MAX98373_R20D4_DHT_EN,
SOC_SINGLE_TLV("DHT Min Volume", MAX98373_R20D1_DHT_CFG,
MAX98373_DHT_SPK_GAIN_MIN_SHIFT, 9, 0, max98373_dht_spkgain_min_tlv),
SOC_SINGLE_TLV("DHT Rot Pnt Volume", MAX98373_R20D1_DHT_CFG,
- MAX98373_DHT_ROT_PNT_SHIFT, 15, 0, max98373_dht_rotation_point_tlv),
+ MAX98373_DHT_ROT_PNT_SHIFT, 15, 1, max98373_dht_rotation_point_tlv),
SOC_SINGLE_TLV("DHT Attack Step Volume", MAX98373_R20D2_DHT_ATTACK_CFG,
MAX98373_DHT_ATTACK_STEP_SHIFT, 4, 0, max98373_dht_step_size_tlv),
SOC_SINGLE_TLV("DHT Release Step Volume", MAX98373_R20D3_DHT_RELEASE_CFG,
--
2.19.0.rc2
The patch
ASoC: max98373: Sort max98373_bde_gain_tlv in reverse order
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From d34c8f37c75b739efc26383145a43497143ada88 Mon Sep 17 00:00:00 2001
From: Ryan Lee <[email protected]>
Date: Wed, 10 Oct 2018 23:26:13 +0000
Subject: [PATCH] ASoC: max98373: Sort max98373_bde_gain_tlv in reverse order
Signed-off-by: Ryan Lee <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/max98373.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 38871677cbae..37f8bcdd8e35 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -483,7 +483,7 @@ static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
);
static const DECLARE_TLV_DB_RANGE(max98373_bde_gain_tlv,
- 0, 60, TLV_DB_SCALE_ITEM(0, -25, 0),
+ 0, 60, TLV_DB_SCALE_ITEM(-1500, 25, 0),
);
static bool max98373_readable_register(struct device *dev, unsigned int reg)
@@ -654,21 +654,21 @@ SOC_SINGLE("BDE Hold Time", MAX98373_R2090_BDE_LVL_HOLD, 0, 0xFF, 0),
SOC_SINGLE("BDE Attack Rate", MAX98373_R2091_BDE_GAIN_ATK_REL_RATE, 4, 0xF, 0),
SOC_SINGLE("BDE Release Rate", MAX98373_R2091_BDE_GAIN_ATK_REL_RATE, 0, 0xF, 0),
SOC_SINGLE_TLV("BDE LVL1 Clip Thresh Volume", MAX98373_R20A9_BDE_L1_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL2 Clip Thresh Volume", MAX98373_R20AC_BDE_L2_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL3 Clip Thresh Volume", MAX98373_R20AF_BDE_L3_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL4 Clip Thresh Volume", MAX98373_R20B2_BDE_L4_CFG_2,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Clip Reduction Volume", MAX98373_R20AA_BDE_L1_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL2 Clip Reduction Volume", MAX98373_R20AD_BDE_L2_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL3 Clip Reduction Volume", MAX98373_R20B0_BDE_L3_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL4 Clip Reduction Volume", MAX98373_R20B3_BDE_L4_CFG_3,
- 0, 0x3C, 0, max98373_bde_gain_tlv),
+ 0, 0x3C, 1, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Limiter Thresh Volume", MAX98373_R20A8_BDE_L1_CFG_1,
0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL2 Limiter Thresh Volume", MAX98373_R20AB_BDE_L2_CFG_1,
--
2.19.0.rc2
The patch
ASoC: max98373: Sort Digital Volume in reverse order
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 4cbbc91609846c09a8350080cd7e6f7764fb2ec1 Mon Sep 17 00:00:00 2001
From: Ryan Lee <[email protected]>
Date: Wed, 10 Oct 2018 23:26:06 +0000
Subject: [PATCH] ASoC: max98373: Sort Digital Volume in reverse order
Signed-off-by: Ryan Lee <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/max98373.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index d6868c9a9ce6..9b7ccd351cae 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -455,7 +455,7 @@ SND_SOC_DAPM_SIGGEN("IMON"),
SND_SOC_DAPM_SIGGEN("FBMON"),
};
-static DECLARE_TLV_DB_SCALE(max98373_digital_tlv, 0, -50, 0);
+static DECLARE_TLV_DB_SCALE(max98373_digital_tlv, -6350, 50, 1);
static const DECLARE_TLV_DB_RANGE(max98373_spk_tlv,
0, 8, TLV_DB_SCALE_ITEM(0, 50, 0),
9, 10, TLV_DB_SCALE_ITEM(500, 100, 0),
@@ -605,7 +605,7 @@ SOC_SINGLE("Dither Switch", MAX98373_R203F_AMP_DSP_CFG,
SOC_SINGLE("DC Blocker Switch", MAX98373_R203F_AMP_DSP_CFG,
MAX98373_AMP_DSP_CFG_DCBLK_SHIFT, 1, 0),
SOC_SINGLE_TLV("Digital Volume", MAX98373_R203D_AMP_DIG_VOL_CTRL,
- 0, 0x7F, 0, max98373_digital_tlv),
+ 0, 0x7F, 1, max98373_digital_tlv),
SOC_SINGLE_TLV("Speaker Volume", MAX98373_R203E_AMP_PATH_GAIN,
MAX98373_SPK_DIGI_GAIN_SHIFT, 10, 0, max98373_spk_tlv),
SOC_SINGLE_TLV("FS Max Volume", MAX98373_R203E_AMP_PATH_GAIN,
--
2.19.0.rc2
The patch
ASoC: max98373: Sort BDE Limiter Thresh Volume in reverse order
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 6c3beeca424a0c8d6c79184a880a8954bd498d57 Mon Sep 17 00:00:00 2001
From: Ryan Lee <[email protected]>
Date: Wed, 10 Oct 2018 23:26:10 +0000
Subject: [PATCH] ASoC: max98373: Sort BDE Limiter Thresh Volume in reverse
order
Signed-off-by: Ryan Lee <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/max98373.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 9b7ccd351cae..38871677cbae 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -479,7 +479,7 @@ static const DECLARE_TLV_DB_RANGE(max98373_dht_rotation_point_tlv,
14, 15, TLV_DB_SCALE_ITEM(-2500, -500, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_limiter_thresh_tlv,
- 0, 15, TLV_DB_SCALE_ITEM(0, -100, 0),
+ 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
);
static const DECLARE_TLV_DB_RANGE(max98373_bde_gain_tlv,
@@ -670,13 +670,13 @@ SOC_SINGLE_TLV("BDE LVL3 Clip Reduction Volume", MAX98373_R20B0_BDE_L3_CFG_3,
SOC_SINGLE_TLV("BDE LVL4 Clip Reduction Volume", MAX98373_R20B3_BDE_L4_CFG_3,
0, 0x3C, 0, max98373_bde_gain_tlv),
SOC_SINGLE_TLV("BDE LVL1 Limiter Thresh Volume", MAX98373_R20A8_BDE_L1_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL2 Limiter Thresh Volume", MAX98373_R20AB_BDE_L2_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL3 Limiter Thresh Volume", MAX98373_R20AE_BDE_L3_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
SOC_SINGLE_TLV("BDE LVL4 Limiter Thresh Volume", MAX98373_R20B1_BDE_L4_CFG_1,
- 0, 0xF, 0, max98373_limiter_thresh_tlv),
+ 0, 0xF, 1, max98373_limiter_thresh_tlv),
/* Limiter */
SOC_SINGLE("Limiter Switch", MAX98373_R20E2_LIMITER_EN,
MAX98373_LIMITER_EN_SHIFT, 1, 0),
--
2.19.0.rc2