PCI fixes:
- Revert a _PXM change that causes silent early boot failure on some AMD
ThreadRipper systems (Bjorn Helgaas)
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the Git repository at:
ssh://[email protected]/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v4.20-fixes-1
for you to fetch changes up to 0d76bcc960e6057750fcf556b65da13f8bbdfd2b:
Revert "ACPI/PCI: Pay attention to device-specific _PXM node values" (2018-11-13 08:38:17 -0600)
----------------------------------------------------------------
pci-v4.20-fixes-1
----------------------------------------------------------------
Bjorn Helgaas (1):
Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"
drivers/pci/pci-acpi.c | 5 -----
1 file changed, 5 deletions(-)
The pull request you sent on Wed, 14 Nov 2018 00:20:10 -0600:
> None None
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/d41217aac0a577a247c9c8cde688419fde25fba5
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
Hey Konstantin,
that bot needs some parsing improvs: "None None".
On Wed, Nov 14, 2018 at 08:00:03PM +0000, [email protected] wrote:
> The pull request you sent on Wed, 14 Nov 2018 00:20:10 -0600:
>
> > None None
>
> has been merged into torvalds/linux.git:
> https://git.kernel.org/torvalds/c/d41217aac0a577a247c9c8cde688419fde25fba5
>
> Thank you!
>
> --
> Deet-doot-dot, I am a bot.
> https://korg.wiki.kernel.org/userdoc/prtracker
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
On Wed, Nov 14, 2018 at 09:12:14PM +0100, Borislav Petkov wrote:
> Hey Konstantin,
>
> that bot needs some parsing improvs: "None None".
Correct, this is because the original pull request was for an ssh://
URL, which I'm not properly handling for the purposes of generating
responses. I will add some logic to deal with that.
-K
On Wed, Nov 14, 2018 at 03:16:58PM -0500, Konstantin Ryabitsev wrote:
> On Wed, Nov 14, 2018 at 09:12:14PM +0100, Borislav Petkov wrote:
> > Hey Konstantin,
> >
> > that bot needs some parsing improvs: "None None".
>
> Correct, this is because the original pull request was for an ssh://
You'd think Bjorn would know better... :-)))
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
On Wed, Nov 14, 2018 at 10:46:01PM +0100, Borislav Petkov wrote:
> > > that bot needs some parsing improvs: "None None".
> >
> > Correct, this is because the original pull request was for an ssh://
>
> You'd think Bjorn would know better... :-)))
For the record, there's nothing wrong with that, it's just a condition
that I didn't expect. I have a fix in place that should avoid this in
the future.
-K
On Wed, Nov 14, 2018 at 05:21:54PM -0500, Konstantin Ryabitsev wrote:
> For the record, there's nothing wrong with that, it's just a condition
> that I didn't expect. I have a fix in place that should avoid this in
> the future.
Actually, I meant the pull request URL.
Here's some background info:
https://lkml.kernel.org/r/CA%2B55aFyMxkS=8JzZ%2BROOAFkwR45EKBnQ0GUMQS4f%[email protected]
and I kinda see the point of maybe not having your ssh username in the
URL. Not that it is a big deal for us, k.org users though.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
On Wed, Nov 14, 2018 at 11:48:39PM +0100, Borislav Petkov wrote:
> On Wed, Nov 14, 2018 at 05:21:54PM -0500, Konstantin Ryabitsev wrote:
> > For the record, there's nothing wrong with that, it's just a condition
> > that I didn't expect. I have a fix in place that should avoid this in
> > the future.
>
> Actually, I meant the pull request URL.
My pull request URL was this:
ssh://[email protected]/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v4.20-fixes-1
> Here's some background info:
>
> https://lkml.kernel.org/r/CA%2B55aFyMxkS=8JzZ%2BROOAFkwR45EKBnQ0GUMQS4f%[email protected]
>
> and I kinda see the point of maybe not having your ssh username in the
> URL. Not that it is a big deal for us, k.org users though.
Sorry, I don't understand the problem. I have this in my .gitconfig:
[url "ssh://[email protected]"]
insteadOf = https://git.kernel.org
insteadOf = http://git.kernel.org
insteadOf = git://git.kernel.org
because I thought that was the recommended way (see the end of
https://korg.wiki.kernel.org/userdoc/gitolite). But that also makes my
request-pull:
$ git request-pull origin/master git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci-v4.20-fixes-1
generate the ssh URL above. If I remove the insteadOf stuff from
.gitconfig, request-pull produces this instead:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v4.20-fixes-1
I'm happy to do either; just tell me which :)
Bjorn
On Thu, Nov 15, 2018 at 01:12:53AM -0600, Bjorn Helgaas wrote:
> > and I kinda see the point of maybe not having your ssh username in the
> > URL. Not that it is a big deal for us, k.org users though.
>
> Sorry, I don't understand the problem. I have this in my .gitconfig:
>
> [url "ssh://[email protected]"]
> insteadOf = https://git.kernel.org
> insteadOf = http://git.kernel.org
> insteadOf = git://git.kernel.org
>
> because I thought that was the recommended way (see the end of
> https://korg.wiki.kernel.org/userdoc/gitolite). But that also makes my
> request-pull:
>
> $ git request-pull origin/master git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci-v4.20-fixes-1
>
> generate the ssh URL above. If I remove the insteadOf stuff from
> .gitconfig, request-pull produces this instead:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v4.20-fixes-1
>
> I'm happy to do either; just tell me which :)
You didn't really do anything wrong. In *general* I prefer to see
public URLs if they are sent to public lists, so if you're cc'ing
something to LKML, I would generally expect the pull request to have a
public URL like https://git.kernel.org/ instead of a private ssh:// URL
that is only accessible to people with a kernel.org account.
That's basically all there is to it. It doesn't *really* matter, since
Linus is the one who will be merging the actual pull request, and he
certainly has access to internal ssh:// URLs. However, in case someone
else was interested in reviewing the pull request, it would be more
friendly to have a public URL for them.
Best,
-K
On Thu, Nov 15, 2018 at 02:53:30AM -0500, Konstantin Ryabitsev wrote:
> On Thu, Nov 15, 2018 at 01:12:53AM -0600, Bjorn Helgaas wrote:
> > > and I kinda see the point of maybe not having your ssh username in the
> > > URL. Not that it is a big deal for us, k.org users though.
> >
> > Sorry, I don't understand the problem. I have this in my .gitconfig:
> >
> > [url "ssh://[email protected]"]
> > insteadOf = https://git.kernel.org
> > insteadOf = http://git.kernel.org
> > insteadOf = git://git.kernel.org
> >
> > because I thought that was the recommended way (see the end of
> > https://korg.wiki.kernel.org/userdoc/gitolite). But that also makes my
> > request-pull:
> >
> > $ git request-pull origin/master git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci-v4.20-fixes-1
> >
> > generate the ssh URL above. If I remove the insteadOf stuff from
> > .gitconfig, request-pull produces this instead:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v4.20-fixes-1
> >
> > I'm happy to do either; just tell me which :)
>
> You didn't really do anything wrong. In *general* I prefer to see
> public URLs if they are sent to public lists, so if you're cc'ing
> something to LKML, I would generally expect the pull request to have a
> public URL like https://git.kernel.org/ instead of a private ssh:// URL
> that is only accessible to people with a kernel.org account.
>
> That's basically all there is to it. It doesn't *really* matter, since
> Linus is the one who will be merging the actual pull request, and he
> certainly has access to internal ssh:// URLs. However, in case someone
> else was interested in reviewing the pull request, it would be more
> friendly to have a public URL for them.
OK, I think I'll remove the insteadOf chunk from my .gitconfig. Should
https://korg.wiki.kernel.org/userdoc/gitolite be updated to remove or
expand that recommendation? The only reason I added insteadOf in the first
place was because it sounded like a security improvement.
Bjorn
On Thu, Nov 15, 2018 at 09:03:21AM -0600, Bjorn Helgaas wrote:
> > You didn't really do anything wrong. In *general* I prefer to see
> > public URLs if they are sent to public lists, so if you're cc'ing
> > something to LKML, I would generally expect the pull request to have a
> > public URL like https://git.kernel.org/ instead of a private ssh:// URL
> > that is only accessible to people with a kernel.org account.
> >
> > That's basically all there is to it. It doesn't *really* matter, since
> > Linus is the one who will be merging the actual pull request, and he
> > certainly has access to internal ssh:// URLs. However, in case someone
> > else was interested in reviewing the pull request, it would be more
> > friendly to have a public URL for them.
>
> OK, I think I'll remove the insteadOf chunk from my .gitconfig. Should
> https://korg.wiki.kernel.org/userdoc/gitolite be updated to remove or
> expand that recommendation? The only reason I added insteadOf in the first
> place was because it sounded like a security improvement.
It is. Does adding the insteadOf rules result in ssh:// URLs when using
git-request-pull? I didn't expect that it would.
-K
On Thu, Nov 15, 2018 at 10:54:18AM -0500, Konstantin Ryabitsev wrote:
> On Thu, Nov 15, 2018 at 09:03:21AM -0600, Bjorn Helgaas wrote:
> > > You didn't really do anything wrong. In *general* I prefer to see
> > > public URLs if they are sent to public lists, so if you're cc'ing
> > > something to LKML, I would generally expect the pull request to have a
> > > public URL like https://git.kernel.org/ instead of a private ssh:// URL
> > > that is only accessible to people with a kernel.org account.
> > >
> > > That's basically all there is to it. It doesn't *really* matter, since
> > > Linus is the one who will be merging the actual pull request, and he
> > > certainly has access to internal ssh:// URLs. However, in case someone
> > > else was interested in reviewing the pull request, it would be more
> > > friendly to have a public URL for them.
> >
> > OK, I think I'll remove the insteadOf chunk from my .gitconfig. Should
> > https://korg.wiki.kernel.org/userdoc/gitolite be updated to remove or
> > expand that recommendation? The only reason I added insteadOf in the first
> > place was because it sounded like a security improvement.
>
> It is. Does adding the insteadOf rules result in ssh:// URLs when using
> git-request-pull? I didn't expect that it would.
Yep, it seems to for me. Maybe I'm doing something else weird, because I
don't see many other pull requests with ssh:// URLs.
On Thu, Nov 15, 2018 at 11:27:06AM -0600, Bjorn Helgaas wrote:
> Yep, it seems to for me. Maybe I'm doing something else weird, because I
> don't see many other pull requests with ssh:// URLs.
So what I've done here is I've added a remote git repo using the
*public* URL of my repo and so when I use git request-pull, I always
point to the public one - I need to fetch the tag before, of course, but
that's trivial - and then the URL is the public one.
I.e,
$ git request-pull master bp-pub <TAG>
This has the additional value of *actually* making sure I've really
pushed the tag.
HTH.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
On Thu, Nov 15, 2018 at 11:27:06AM -0600, Bjorn Helgaas wrote:
> > > OK, I think I'll remove the insteadOf chunk from my .gitconfig. Should
> > > https://korg.wiki.kernel.org/userdoc/gitolite be updated to remove or
> > > expand that recommendation? The only reason I added insteadOf in the first
> > > place was because it sounded like a security improvement.
> >
> > It is. Does adding the insteadOf rules result in ssh:// URLs when using
> > git-request-pull? I didn't expect that it would.
>
> Yep, it seems to for me. Maybe I'm doing something else weird, because I
> don't see many other pull requests with ssh:// URLs.
Hmm, you're right -- I just tested this and it does. I can't imagine
that's the intended effect of insteadOf -- it's supposed to alter URLs
behind the scenes, not permanently transform them. I'll talk to git
folks about it.
For now, you should probably remove that from your gitconfig so that
your pull requests have public URLs in them.
Best,
-K