From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 202dc3cc10b4d37e5251431acf8d5040a8876c7d ]
On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on
R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before
the DMA channel pointer is initialized. Hence this fails, and the
driver tries to fall back to PIO. However, at this early phase in the
initialization sequence, fallback to PIO does not work, leading to a
serial port that cannot receive any data.
Fix this by calling sci_submit_rx() after initialization of the DMA
channel pointer.
Reported-by: Yoshihiro Shimoda <[email protected]>
Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/sh-sci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ab3f6e91853d..e19bfbba8a01 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port)
hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
s->rx_timer.function = rx_timer_fn;
+ s->chan_rx_saved = s->chan_rx = chan;
+
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
sci_submit_rx(s);
-
- s->chan_rx_saved = s->chan_rx = chan;
}
}
--
2.17.1
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit ad703c2b9127f9acdef697ec4755f6da4beaa266 ]
Packets with marked invalid IP/UDP/TCP checksums were considered as good
by the driver. The error was in a logic, processing offload bits in
RX descriptor.
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/aquantia/atlantic/aq_ring.c | 35 +++++++++++-------
.../aquantia/atlantic/hw_atl/hw_atl_b0.c | 36 +++++++++----------
2 files changed, 41 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index d1e1a0ba8615..7134d0d4cdf7 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -172,6 +172,27 @@ bool aq_ring_tx_clean(struct aq_ring_s *self)
return !!budget;
}
+static void aq_rx_checksum(struct aq_ring_s *self,
+ struct aq_ring_buff_s *buff,
+ struct sk_buff *skb)
+{
+ if (!(self->aq_nic->ndev->features & NETIF_F_RXCSUM))
+ return;
+
+ if (unlikely(buff->is_cso_err)) {
+ ++self->stats.rx.errors;
+ skb->ip_summed = CHECKSUM_NONE;
+ return;
+ }
+ if (buff->is_ip_cso) {
+ __skb_incr_checksum_unnecessary(skb);
+ if (buff->is_udp_cso || buff->is_tcp_cso)
+ __skb_incr_checksum_unnecessary(skb);
+ } else {
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+}
+
#define AQ_SKB_ALIGN SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
int aq_ring_rx_clean(struct aq_ring_s *self,
struct napi_struct *napi,
@@ -267,18 +288,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
}
skb->protocol = eth_type_trans(skb, ndev);
- if (unlikely(buff->is_cso_err)) {
- ++self->stats.rx.errors;
- skb->ip_summed = CHECKSUM_NONE;
- } else {
- if (buff->is_ip_cso) {
- __skb_incr_checksum_unnecessary(skb);
- if (buff->is_udp_cso || buff->is_tcp_cso)
- __skb_incr_checksum_unnecessary(skb);
- } else {
- skb->ip_summed = CHECKSUM_NONE;
- }
- }
+
+ aq_rx_checksum(self, buff, skb);
skb_set_hash(skb, buff->rss_hash,
buff->is_hash_l4 ? PKT_HASH_TYPE_L4 :
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 0271a0fdfee8..88705dee5b95 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -655,9 +655,9 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
struct hw_atl_rxd_wb_s *rxd_wb = (struct hw_atl_rxd_wb_s *)
&ring->dx_ring[ring->hw_head * HW_ATL_B0_RXD_SIZE];
- unsigned int is_err = 1U;
unsigned int is_rx_check_sum_enabled = 0U;
unsigned int pkt_type = 0U;
+ u8 rx_stat = 0U;
if (!(rxd_wb->status & 0x1U)) { /* RxD is not done */
break;
@@ -665,35 +665,35 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
buff = &ring->buff_ring[ring->hw_head];
- is_err = (0x0000003CU & rxd_wb->status);
+ rx_stat = (0x0000003CU & rxd_wb->status) >> 2;
is_rx_check_sum_enabled = (rxd_wb->type) & (0x3U << 19);
- is_err &= ~0x20U; /* exclude validity bit */
pkt_type = 0xFFU & (rxd_wb->type >> 4);
- if (is_rx_check_sum_enabled) {
- if (0x0U == (pkt_type & 0x3U))
- buff->is_ip_cso = (is_err & 0x08U) ? 0U : 1U;
+ if (is_rx_check_sum_enabled & BIT(0) &&
+ (0x0U == (pkt_type & 0x3U)))
+ buff->is_ip_cso = (rx_stat & BIT(1)) ? 0U : 1U;
+ if (is_rx_check_sum_enabled & BIT(1)) {
if (0x4U == (pkt_type & 0x1CU))
- buff->is_udp_cso = buff->is_cso_err ? 0U : 1U;
+ buff->is_udp_cso = (rx_stat & BIT(2)) ? 0U :
+ !!(rx_stat & BIT(3));
else if (0x0U == (pkt_type & 0x1CU))
- buff->is_tcp_cso = buff->is_cso_err ? 0U : 1U;
-
- /* Checksum offload workaround for small packets */
- if (rxd_wb->pkt_len <= 60) {
- buff->is_ip_cso = 0U;
- buff->is_cso_err = 0U;
- }
+ buff->is_tcp_cso = (rx_stat & BIT(2)) ? 0U :
+ !!(rx_stat & BIT(3));
+ }
+ buff->is_cso_err = !!(rx_stat & 0x6);
+ /* Checksum offload workaround for small packets */
+ if (unlikely(rxd_wb->pkt_len <= 60)) {
+ buff->is_ip_cso = 0U;
+ buff->is_cso_err = 0U;
}
-
- is_err &= ~0x18U;
dma_unmap_page(ndev, buff->pa, buff->len, DMA_FROM_DEVICE);
- if (is_err || rxd_wb->type & 0x1000U) {
- /* status error or DMA error */
+ if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) {
+ /* MAC error or DMA error */
buff->is_error = 1U;
} else {
if (self->aq_nic_cfg->is_rss) {
--
2.17.1
From: Sagiv Ozeri <[email protected]>
[ Upstream commit fa5c448d98f0df660bfcad3dd5facc027ef84cd3 ]
A stuck ramrod should be deleted from the completion_pending list,
otherwise it will be added again in the future and corrupt the list.
Return error value to inform that ramrod is stuck and should be deleted.
Signed-off-by: Sagiv Ozeri <[email protected]>
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_spq.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index 43619b6bb232..7106ad17afe2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -142,6 +142,7 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn,
DP_INFO(p_hwfn, "Ramrod is stuck, requesting MCP drain\n");
rc = qed_mcp_drain(p_hwfn, p_ptt);
+ qed_ptt_release(p_hwfn, p_ptt);
if (rc) {
DP_NOTICE(p_hwfn, "MCP drain failed\n");
goto err;
@@ -150,18 +151,15 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn,
/* Retry after drain */
rc = __qed_spq_block(p_hwfn, p_ent, p_fw_ret, true);
if (!rc)
- goto out;
+ return 0;
comp_done = (struct qed_spq_comp_done *)p_ent->comp_cb.cookie;
- if (comp_done->done == 1)
+ if (comp_done->done == 1) {
if (p_fw_ret)
*p_fw_ret = comp_done->fw_return_code;
-out:
- qed_ptt_release(p_hwfn, p_ptt);
- return 0;
-
+ return 0;
+ }
err:
- qed_ptt_release(p_hwfn, p_ptt);
DP_NOTICE(p_hwfn,
"Ramrod is stuck [CID %08x cmd %02x protocol %02x echo %04x]\n",
le32_to_cpu(p_ent->elem.hdr.cid),
--
2.17.1
From: Subash Abhinov Kasiviswanathan <[email protected]>
[ Upstream commit d02854dc1999ed3e7fd79ec700c64ac23ac0c458 ]
A null dereference was observed when a sysctl was being set
from userspace and rmnet was stuck trying to complete some actions
in the NETDEV_REGISTER callback. This is because the real_dev is set
only after the device registration handler completes.
sysctl call stack -
<6> Unable to handle kernel NULL pointer dereference at
virtual address 00000108
<2> pc : rmnet_vnd_get_iflink+0x1c/0x28
<2> lr : dev_get_iflink+0x2c/0x40
<2> rmnet_vnd_get_iflink+0x1c/0x28
<2> inet6_fill_ifinfo+0x15c/0x234
<2> inet6_ifinfo_notify+0x68/0xd4
<2> ndisc_ifinfo_sysctl_change+0x1b8/0x234
<2> proc_sys_call_handler+0xac/0x100
<2> proc_sys_write+0x3c/0x4c
<2> __vfs_write+0x54/0x14c
<2> vfs_write+0xcc/0x188
<2> SyS_write+0x60/0xc0
<2> el0_svc_naked+0x34/0x38
device register call stack -
<2> notifier_call_chain+0x84/0xbc
<2> raw_notifier_call_chain+0x38/0x48
<2> call_netdevice_notifiers_info+0x40/0x70
<2> call_netdevice_notifiers+0x38/0x60
<2> register_netdevice+0x29c/0x3d8
<2> rmnet_vnd_newlink+0x68/0xe8
<2> rmnet_newlink+0xa0/0x160
<2> rtnl_newlink+0x57c/0x6c8
<2> rtnetlink_rcv_msg+0x1dc/0x328
<2> netlink_rcv_skb+0xac/0x118
<2> rtnetlink_rcv+0x24/0x30
<2> netlink_unicast+0x158/0x1f0
<2> netlink_sendmsg+0x32c/0x338
<2> sock_sendmsg+0x44/0x60
<2> SyS_sendto+0x150/0x1ac
<2> el0_svc_naked+0x34/0x38
Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink")
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 0afc3d335d56..d11c16aeb19a 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -234,7 +234,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct net_device *real_dev,
struct rmnet_endpoint *ep)
{
- struct rmnet_priv *priv;
+ struct rmnet_priv *priv = netdev_priv(rmnet_dev);
int rc;
if (ep->egress_dev)
@@ -247,6 +247,8 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
rmnet_dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
rmnet_dev->hw_features |= NETIF_F_SG;
+ priv->real_dev = real_dev;
+
rc = register_netdevice(rmnet_dev);
if (!rc) {
ep->egress_dev = rmnet_dev;
@@ -255,9 +257,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
rmnet_dev->rtnl_link_ops = &rmnet_link_ops;
- priv = netdev_priv(rmnet_dev);
priv->mux_id = id;
- priv->real_dev = real_dev;
netdev_dbg(rmnet_dev, "rmnet dev created\n");
}
--
2.17.1
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 7a1bb49461b12b2e6332a4d054256835f45203f3 ]
IOMMU fault may occurr on unbind/bind or if_down/if_up sequence.
Although driver disables the rings on down, this is not enough.
Due to internal HW design, during subsequent initialization
NIC sometimes may reuse RX descriptors cache and write to the
host memory from the descriptor cache.
That's get catched by IOMMU on host.
This patch invalidates the descriptor cache in NIC on interface down
to prevent writing to the cached descriptors and to the memory pointed
in those descriptors.
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../aquantia/atlantic/hw_atl/hw_atl_b0.c | 6 ++++++
.../aquantia/atlantic/hw_atl/hw_atl_llh.c | 8 ++++++++
.../aquantia/atlantic/hw_atl/hw_atl_llh.h | 3 +++
.../atlantic/hw_atl/hw_atl_llh_internal.h | 18 ++++++++++++++++++
4 files changed, 35 insertions(+)
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 1d44a386e7d3..0271a0fdfee8 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -915,6 +915,12 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self)
static int hw_atl_b0_hw_stop(struct aq_hw_s *self)
{
hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK);
+
+ /* Invalidate Descriptor Cache to prevent writing to the cached
+ * descriptors and to the data pointer of those descriptors
+ */
+ hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1);
+
return aq_hw_err_from_flags(self);
}
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
index 10ba035dadb1..10ec5dc88e24 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
@@ -619,6 +619,14 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(struct aq_hw_s *aq_hw, u32 rx_flow_ctl_mode
HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode);
}
+void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init)
+{
+ aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR,
+ HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK,
+ HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT,
+ init);
+}
+
void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw,
u32 rx_pkt_buff_size_per_tc, u32 buffer)
{
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
index dfb426f2dc2c..b3bf64b48b93 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
@@ -325,6 +325,9 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw,
u32 rx_pkt_buff_size_per_tc,
u32 buffer);
+/* set rdm rx dma descriptor cache init */
+void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init);
+
/* set rx xoff enable (per tc) */
void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc,
u32 buffer);
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
index e0cf70120f1d..e2ecdb1c5a5c 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
@@ -293,6 +293,24 @@
/* default value of bitfield desc{d}_reset */
#define HW_ATL_RDM_DESCDRESET_DEFAULT 0x0
+/* rdm_desc_init_i bitfield definitions
+ * preprocessor definitions for the bitfield rdm_desc_init_i.
+ * port="pif_rdm_desc_init_i"
+ */
+
+/* register address for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR 0x00005a00
+/* bitmask for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK 0xffffffff
+/* inverted bitmask for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSKN 0x00000000
+/* lower bit position of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT 0
+/* width of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_WIDTH 32
+/* default value of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0
+
/* rx int_desc_wrb_en bitfield definitions
* preprocessor definitions for the bitfield "int_desc_wrb_en".
* port="pif_rdm_int_desc_wrb_en_i"
--
2.17.1
From: Guenter Roeck <[email protected]>
[ Upstream commit 8ef14c2c41d962756d314f1d7dc972b0ea7a180f ]
This reverts commit 6147b1cf19651c7de297e69108b141fb30aa2349.
The reverted patch results in attempted write access to the source
repository, even if that repository is mounted read-only.
Output from "strace git status -uno --porcelain":
getcwd("/tmp/linux-test", 129) = 16
open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) =
-1 EROFS (Read-only file system)
While git appears to be able to handle this situation, a monitored
build environment (such as the one used for Chrome OS kernel builds)
may detect it and bail out with an access violation error. On top of
that, the attempted write access suggests that git _will_ write to the
file even if a build output directory is specified. Users may have the
reasonable expectation that the source repository remains untouched in
that situation.
Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust"
Cc: Genki Sky <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/setlocalversion | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 79f7dd57d571..71f39410691b 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -74,7 +74,7 @@ scm_version()
fi
# Check for uncommitted changes
- if git status -uno --porcelain | grep -qv '^.. scripts/package'; then
+ if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then
printf '%s' -dirty
fi
--
2.17.1
From: Igor Russkikh <[email protected]>
[ Upstream commit bfaa9f8553d5c20703781e63f4fc8cb4792f18fd ]
Fixed a condition mistake due to which macvlans unicast
item number 32 was not added in the unicast filter.
The consequence is that when exactly 32 macvlans are created
on NIC, the last created macvlan receives no traffic because
its MAC was not registered in HW.
Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling")
Signed-off-by: Igor Russkikh <[email protected]>
Tested-by: Nikita Danilov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 26dc6782b475..4f34808f1e06 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -590,7 +590,7 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev)
}
}
- if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) {
+ if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) {
packet_filter |= IFF_MULTICAST;
self->mc_list.count = i;
self->aq_hw_ops->hw_multicast_list_set(self->aq_hw,
--
2.17.1
From: Thor Thayer <[email protected]>
[ Upstream commit 8137b6ef0ce469154e5cf19f8e7fe04d9a72ac5e ]
Ping problems with packets > 8191 as shown:
PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data.
8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms
wrong data byte 8144 should be 0xd0 but was 0x0
16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
%< ---------------snip--------------------------------------
8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
8144 0 0 0 0 d0 d1
^^^^^^^
Notice the 4 bytes of 0 before the expected byte of d0.
Databook notes that the RX buffer must be a multiple of 4/8/16
bytes [1].
Update the DMA Buffer size define to 8188 instead of 8192. Remove
the -1 from the RX buffer size allocations and use the new
DMA Buffer size directly.
[1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a
[section 8.4.2 - Table 8-24]
Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.
Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)")
Suggested-by: Jose Abreu <[email protected]>
Signed-off-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++-
drivers/net/ethernet/stmicro/stmmac/descs_com.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 2 +-
4 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b1b305f8f414..272b9ca66314 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -365,7 +365,8 @@ struct dma_features {
/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
#define BUF_SIZE_16KiB 16384
-#define BUF_SIZE_8KiB 8192
+/* RX Buffer size must be < 8191 and multiple of 4/8/16 bytes */
+#define BUF_SIZE_8KiB 8188
#define BUF_SIZE_4KiB 4096
#define BUF_SIZE_2KiB 2048
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index ca9d7e48034c..40d6356a7e73 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -31,7 +31,7 @@
/* Enhanced descriptors */
static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
{
- p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1)
+ p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
<< ERDES1_BUFFER2_SIZE_SHIFT)
& ERDES1_BUFFER2_SIZE_MASK);
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 77914c89d749..5ef91a790f9d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -262,7 +262,7 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
int mode, int end)
{
p->des0 |= cpu_to_le32(RDES0_OWN);
- p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK);
+ p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
if (mode == STMMAC_CHAIN_MODE)
ehn_desc_rx_set_on_chain(p);
diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
index a7ffc73fffe8..bc83ced94e1b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -140,7 +140,7 @@ static void clean_desc3(void *priv_ptr, struct dma_desc *p)
static int set_16kib_bfsize(int mtu)
{
int ret = 0;
- if (unlikely(mtu >= BUF_SIZE_8KiB))
+ if (unlikely(mtu > BUF_SIZE_8KiB))
ret = BUF_SIZE_16KiB;
return ret;
}
--
2.17.1
From: Andrew Lunn <[email protected]>
[ Upstream commit a9049ff9214da68df1179a7d5e36b43479abc9b8 ]
The mv88e6161 would sometime fail to probe with a timeout waiting for
the switch to complete an operation. This operation is supposed to
clear the statistics counters. However, due to a read/modify/write,
without the needed mask, the operation actually carried out was more
random, with invalid parameters, resulting in the switch not
responding. We need to preserve the histogram mode bits, so apply a
mask to keep them.
Reported-by: Chris Healy <[email protected]>
Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mv88e6xxx/global1.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index d721ccf7d8be..38e399e0f30e 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -567,6 +567,8 @@ int mv88e6xxx_g1_stats_clear(struct mv88e6xxx_chip *chip)
if (err)
return err;
+ /* Keep the histogram mode bits */
+ val &= MV88E6XXX_G1_STATS_OP_HIST_RX_TX;
val |= MV88E6XXX_G1_STATS_OP_BUSY | MV88E6XXX_G1_STATS_OP_FLUSH_ALL;
err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val);
--
2.17.1
From: Stefan Wahren <[email protected]>
[ Upstream commit 85b18b0237ce9986a81a1b9534b5e2ee116f5504 ]
The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC
drivers") introduce a common MTU handling for usbnet. But it's missing
the necessary changes for smsc95xx. So set the MTU range accordingly.
This patch has been tested on a Raspberry Pi 3.
Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc95xx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 2d17f3b9bb16..f2d01cb6f958 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1321,6 +1321,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
dev->net->flags |= IFF_MULTICAST;
dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
+ dev->net->min_mtu = ETH_MIN_MTU;
+ dev->net->max_mtu = ETH_DATA_LEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
pdata->dev = dev;
--
2.17.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit bbcde0a7241261cd0ca8d8e6b94a4113a4b71443 ]
Since commit b41d920acff8 ("kbuild: deb-pkg: split generating packaging
and build"), the build version of the kernel contained in a deb package
is too low by 1.
Prior to the bad commit, the kernel was built first, then the number
in .version file was read out, and written into the debian control file.
Now, the debian control file is created before the kernel is actually
compiled, which is causing the version number mismatch.
Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require
the build system to use the specified version number.
Fixes: b41d920acff8 ("kbuild: deb-pkg: split generating packaging and build")
Reported-by: Doug Smythies <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Doug Smythies <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/package/mkdebian | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index 663a7f343b42..edcad61fe3cd 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -88,6 +88,7 @@ set_debarch() {
version=$KERNELRELEASE
if [ -n "$KDEB_PKGVERSION" ]; then
packageversion=$KDEB_PKGVERSION
+ revision=${packageversion##*-}
else
revision=$(cat .version 2>/dev/null||echo 1)
packageversion=$version-$revision
@@ -205,10 +206,12 @@ cat <<EOF > debian/rules
#!$(command -v $MAKE) -f
build:
- \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC=
+ \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \
+ KBUILD_BUILD_VERSION=${revision} KBUILD_SRC=
binary-arch:
- \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC= intdeb-pkg
+ \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \
+ KBUILD_BUILD_VERSION=${revision} KBUILD_SRC= intdeb-pkg
clean:
rm -rf debian/*tmp debian/files
--
2.17.1
From: Denis Bolotin <[email protected]>
[ Upstream commit 39477551df940ddb1339203817de04f5caaacf7a ]
Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/qlogic/qed/qed_sp_commands.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
index 77b6248ad3b9..e86a1ea23613 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -80,7 +80,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
case QED_SPQ_MODE_BLOCK:
if (!p_data->p_comp_data)
- return -EINVAL;
+ goto err;
p_ent->comp_cb.cookie = p_data->p_comp_data->cookie;
break;
@@ -95,7 +95,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
default:
DP_NOTICE(p_hwfn, "Unknown SPQE completion mode %d\n",
p_ent->comp_mode);
- return -EINVAL;
+ goto err;
}
DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
@@ -109,6 +109,18 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
memset(&p_ent->ramrod, 0, sizeof(p_ent->ramrod));
return 0;
+
+err:
+ /* qed_spq_get_entry() can either get an entry from the free_pool,
+ * or, if no entries are left, allocate a new entry and add it to
+ * the unlimited_pending list.
+ */
+ if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending)
+ kfree(p_ent);
+ else
+ qed_spq_return_entry(p_hwfn, p_ent);
+
+ return -EINVAL;
}
static enum tunnel_clss qed_tunn_clss_to_fw_clss(u8 type)
--
2.17.1
From: Denis Bolotin <[email protected]>
[ Upstream commit fb5e7438e7a3c8966e04ccb0760170e9e06f3699 ]
qed_sp_destroy_request() API was added for SPQ users that need to
free/return the entry they acquired in their error flows.
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_fcoe.c | 11 +++++++---
drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_l2.c | 12 ++++++----
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_roce.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_sp.h | 11 ++++++++++
.../net/ethernet/qlogic/qed/qed_sp_commands.c | 22 ++++++++++++-------
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 +
8 files changed, 45 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
index cc1b373c0ace..46dc93d3b9b5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
@@ -147,7 +147,8 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
"Cannot satisfy CQ amount. CQs requested %d, CQs available %d. Aborting function start\n",
fcoe_pf_params->num_cqs,
p_hwfn->hw_info.feat_num[QED_FCOE_CQ]);
- return -EINVAL;
+ rc = -EINVAL;
+ goto err;
}
p_data->mtu = cpu_to_le16(fcoe_pf_params->mtu);
@@ -156,14 +157,14 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
rc = qed_cxt_acquire_cid(p_hwfn, PROTOCOLID_FCOE, &dummy_cid);
if (rc)
- return rc;
+ goto err;
cxt_info.iid = dummy_cid;
rc = qed_cxt_get_cid_info(p_hwfn, &cxt_info);
if (rc) {
DP_NOTICE(p_hwfn, "Cannot find context info for dummy cid=%d\n",
dummy_cid);
- return rc;
+ goto err;
}
p_cxt = cxt_info.p_cxt;
SET_FIELD(p_cxt->tstorm_ag_context.flags3,
@@ -240,6 +241,10 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
rc = qed_spq_post(p_hwfn, p_ent, NULL);
return rc;
+
+err:
+ qed_sp_destroy_request(p_hwfn, p_ent);
+ return rc;
}
static int
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
index 1135387bd99d..4f8a685d1a55 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
@@ -200,6 +200,7 @@ qed_sp_iscsi_func_start(struct qed_hwfn *p_hwfn,
"Cannot satisfy CQ amount. Queues requested %d, CQs available %d. Aborting function start\n",
p_params->num_queues,
p_hwfn->hw_info.feat_num[QED_ISCSI_CQ]);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 82a1bd1f8a8c..67c02ea93906 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -740,8 +740,7 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
rc = qed_sp_vport_update_rss(p_hwfn, p_ramrod, p_rss_params);
if (rc) {
- /* Return spq entry which is taken in qed_sp_init_request()*/
- qed_spq_return_entry(p_hwfn, p_ent);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
@@ -1355,6 +1354,7 @@ qed_filter_ucast_common(struct qed_hwfn *p_hwfn,
DP_NOTICE(p_hwfn,
"%d is not supported yet\n",
p_filter_cmd->opcode);
+ qed_sp_destroy_request(p_hwfn, *pp_ent);
return -EINVAL;
}
@@ -2056,13 +2056,13 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn,
} else {
rc = qed_fw_vport(p_hwfn, p_params->vport_id, &abs_vport_id);
if (rc)
- return rc;
+ goto err;
if (p_params->qid != QED_RFS_NTUPLE_QID_RSS) {
rc = qed_fw_l2_queue(p_hwfn, p_params->qid,
&abs_rx_q_id);
if (rc)
- return rc;
+ goto err;
p_ramrod->rx_qid_valid = 1;
p_ramrod->rx_qid = cpu_to_le16(abs_rx_q_id);
@@ -2083,6 +2083,10 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn,
(u64)p_params->addr, p_params->length);
return qed_spq_post(p_hwfn, p_ent, NULL);
+
+err:
+ qed_sp_destroy_request(p_hwfn, p_ent);
+ return rc;
}
int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index c71391b9c757..62113438c880 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -1514,6 +1514,7 @@ qed_rdma_register_tid(void *rdma_cxt,
default:
rc = -EINVAL;
DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "rc = %d\n", rc);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
SET_FIELD(p_ramrod->flags1,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index f9167d1354bb..e49fada85410 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -745,6 +745,7 @@ static int qed_roce_sp_destroy_qp_responder(struct qed_hwfn *p_hwfn,
DP_NOTICE(p_hwfn,
"qed destroy responder failed: cannot allocate memory (ramrod). rc = %d\n",
rc);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index 04259df8a5c2..3157c0d99441 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -399,6 +399,17 @@ struct qed_sp_init_data {
struct qed_spq_comp_cb *p_comp_data;
};
+/**
+ * @brief Returns a SPQ entry to the pool / frees the entry if allocated.
+ * Should be called on in error flows after initializing the SPQ entry
+ * and before posting it.
+ *
+ * @param p_hwfn
+ * @param p_ent
+ */
+void qed_sp_destroy_request(struct qed_hwfn *p_hwfn,
+ struct qed_spq_entry *p_ent);
+
int qed_sp_init_request(struct qed_hwfn *p_hwfn,
struct qed_spq_entry **pp_ent,
u8 cmd,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
index e86a1ea23613..888274fa208b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -47,6 +47,19 @@
#include "qed_sp.h"
#include "qed_sriov.h"
+void qed_sp_destroy_request(struct qed_hwfn *p_hwfn,
+ struct qed_spq_entry *p_ent)
+{
+ /* qed_spq_get_entry() can either get an entry from the free_pool,
+ * or, if no entries are left, allocate a new entry and add it to
+ * the unlimited_pending list.
+ */
+ if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending)
+ kfree(p_ent);
+ else
+ qed_spq_return_entry(p_hwfn, p_ent);
+}
+
int qed_sp_init_request(struct qed_hwfn *p_hwfn,
struct qed_spq_entry **pp_ent,
u8 cmd, u8 protocol, struct qed_sp_init_data *p_data)
@@ -111,14 +124,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
return 0;
err:
- /* qed_spq_get_entry() can either get an entry from the free_pool,
- * or, if no entries are left, allocate a new entry and add it to
- * the unlimited_pending list.
- */
- if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending)
- kfree(p_ent);
- else
- qed_spq_return_entry(p_hwfn, p_ent);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 9b08a9d9e151..ca6290fa0f30 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -101,6 +101,7 @@ static int qed_sp_vf_start(struct qed_hwfn *p_hwfn, struct qed_vf_info *p_vf)
default:
DP_NOTICE(p_hwfn, "Unknown VF personality %d\n",
p_hwfn->hw_info.personality);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return -EINVAL;
}
--
2.17.1
From: Gustavo Romero <[email protected]>
[ Upstream commit 6ac2226229d931153331a93d90655a3de05b9290 ]
Currently jvmti agent can not be used because function scnprintf is not
present in the agent libperf-jvmti.so. As a result the JVM when using
such agent to record JITed code profiling information will fail on
looking up scnprintf:
java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf
This commit fixes that by reverting to the use of snprintf, that can be
looked up, instead of scnprintf, adding a proper check for the returned
value in order to print a better error message when the jitdump file
pathname is too long. Checking the returned value also helps to comply
with some recent gcc versions, like gcc8, which will fail due to
truncated writing checks related to the -Werror=format-truncation= flag.
Signed-off-by: Gustavo Romero <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
LPU-Reference: [email protected]
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/jvmti/jvmti_agent.c | 49 ++++++++++++++++++++++++++--------
1 file changed, 38 insertions(+), 11 deletions(-)
diff --git a/tools/perf/jvmti/jvmti_agent.c b/tools/perf/jvmti/jvmti_agent.c
index ac1bcdc17dae..f7eb63cbbc65 100644
--- a/tools/perf/jvmti/jvmti_agent.c
+++ b/tools/perf/jvmti/jvmti_agent.c
@@ -125,7 +125,7 @@ perf_get_timestamp(void)
}
static int
-debug_cache_init(void)
+create_jit_cache_dir(void)
{
char str[32];
char *base, *p;
@@ -144,8 +144,13 @@ debug_cache_init(void)
strftime(str, sizeof(str), JIT_LANG"-jit-%Y%m%d", &tm);
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/", base);
-
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/", base);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because %s/.debug/"
+ " is too long, please check the cwd, JITDUMPDIR, and"
+ " HOME variables", base);
+ return -1;
+ }
ret = mkdir(jit_path, 0755);
if (ret == -1) {
if (errno != EEXIST) {
@@ -154,20 +159,32 @@ debug_cache_init(void)
}
}
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit", base);
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit", base);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because"
+ " %s/.debug/jit is too long, please check the cwd,"
+ " JITDUMPDIR, and HOME variables", base);
+ return -1;
+ }
ret = mkdir(jit_path, 0755);
if (ret == -1) {
if (errno != EEXIST) {
- warn("cannot create jit cache dir %s", jit_path);
+ warn("jvmti: cannot create jit cache dir %s", jit_path);
return -1;
}
}
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit/%s.XXXXXXXX", base, str);
-
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit/%s.XXXXXXXX", base, str);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because"
+ " %s/.debug/jit/%s.XXXXXXXX is too long, please check"
+ " the cwd, JITDUMPDIR, and HOME variables",
+ base, str);
+ return -1;
+ }
p = mkdtemp(jit_path);
if (p != jit_path) {
- warn("cannot create jit cache dir %s", jit_path);
+ warn("jvmti: cannot create jit cache dir %s", jit_path);
return -1;
}
@@ -228,7 +245,7 @@ void *jvmti_open(void)
{
char dump_path[PATH_MAX];
struct jitheader header;
- int fd;
+ int fd, ret;
FILE *fp;
init_arch_timestamp();
@@ -245,12 +262,22 @@ void *jvmti_open(void)
memset(&header, 0, sizeof(header));
- debug_cache_init();
+ /*
+ * jitdump file dir
+ */
+ if (create_jit_cache_dir() < 0)
+ return NULL;
/*
* jitdump file name
*/
- scnprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
+ ret = snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jitdump file full path because"
+ " %s/jit-%i.dump is too long, please check the cwd,"
+ " JITDUMPDIR, and HOME variables", jit_path, getpid());
+ return NULL;
+ }
fd = open(dump_path, O_CREAT|O_TRUNC|O_RDWR, 0666);
if (fd == -1)
--
2.17.1
From: Michał Mirosław <[email protected]>
[ Upstream commit e84b47941e15e6666afb8ee8b21d1c3fc1a013af ]
Don't request tag insertion when it isn't present in outgoing skb.
Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 699ef942b615..7661064c815b 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1545,7 +1545,7 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_crq.v1.sge_len = cpu_to_be32(skb->len);
tx_crq.v1.ioba = cpu_to_be64(data_dma_addr);
- if (adapter->vlan_header_insertion) {
+ if (adapter->vlan_header_insertion && skb_vlan_tag_present(skb)) {
tx_crq.v1.flags2 |= IBMVNIC_TX_VLAN_INSERT;
tx_crq.v1.vlan_id = cpu_to_be16(skb->vlan_tci);
}
--
2.17.1
From: Denis Bolotin <[email protected]>
[ Upstream commit 2632f22ebd08da249c2017962a199a0cfb2324bf ]
When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_sp.h | 3 ++
drivers/net/ethernet/qlogic/qed/qed_spq.c | 57 ++++++++++++-----------
2 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index e95431f6acd4..04259df8a5c2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -167,6 +167,9 @@ struct qed_spq_entry {
enum spq_mode comp_mode;
struct qed_spq_comp_cb comp_cb;
struct qed_spq_comp_done comp_done; /* SPQ_MODE_EBLOCK */
+
+ /* Posted entry for unlimited list entry in EBLOCK mode */
+ struct qed_spq_entry *post_ent;
};
struct qed_eq {
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index 1673fc90027f..43619b6bb232 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -685,6 +685,8 @@ static int qed_spq_add_entry(struct qed_hwfn *p_hwfn,
/* EBLOCK responsible to free the allocated p_ent */
if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK)
kfree(p_ent);
+ else
+ p_ent->post_ent = p_en2;
p_ent = p_en2;
}
@@ -768,6 +770,25 @@ static int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
SPQ_HIGH_PRI_RESERVE_DEFAULT);
}
+/* Avoid overriding of SPQ entries when getting out-of-order completions, by
+ * marking the completions in a bitmap and increasing the chain consumer only
+ * for the first successive completed entries.
+ */
+static void qed_spq_comp_bmap_update(struct qed_hwfn *p_hwfn, __le16 echo)
+{
+ u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE;
+ struct qed_spq *p_spq = p_hwfn->p_spq;
+
+ __set_bit(pos, p_spq->p_comp_bitmap);
+ while (test_bit(p_spq->comp_bitmap_idx,
+ p_spq->p_comp_bitmap)) {
+ __clear_bit(p_spq->comp_bitmap_idx,
+ p_spq->p_comp_bitmap);
+ p_spq->comp_bitmap_idx++;
+ qed_chain_return_produced(&p_spq->chain);
+ }
+}
+
int qed_spq_post(struct qed_hwfn *p_hwfn,
struct qed_spq_entry *p_ent, u8 *fw_return_code)
{
@@ -825,11 +846,12 @@ int qed_spq_post(struct qed_hwfn *p_hwfn,
p_ent->queue == &p_spq->unlimited_pending);
if (p_ent->queue == &p_spq->unlimited_pending) {
- /* This is an allocated p_ent which does not need to
- * return to pool.
- */
+ struct qed_spq_entry *p_post_ent = p_ent->post_ent;
+
kfree(p_ent);
- return rc;
+
+ /* Return the entry which was actually posted */
+ p_ent = p_post_ent;
}
if (rc)
@@ -843,7 +865,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn,
spq_post_fail2:
spin_lock_bh(&p_spq->lock);
list_del(&p_ent->list);
- qed_chain_return_produced(&p_spq->chain);
+ qed_spq_comp_bmap_update(p_hwfn, p_ent->elem.hdr.echo);
spq_post_fail:
/* return to the free pool */
@@ -875,25 +897,8 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
spin_lock_bh(&p_spq->lock);
list_for_each_entry_safe(p_ent, tmp, &p_spq->completion_pending, list) {
if (p_ent->elem.hdr.echo == echo) {
- u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE;
-
list_del(&p_ent->list);
-
- /* Avoid overriding of SPQ entries when getting
- * out-of-order completions, by marking the completions
- * in a bitmap and increasing the chain consumer only
- * for the first successive completed entries.
- */
- __set_bit(pos, p_spq->p_comp_bitmap);
-
- while (test_bit(p_spq->comp_bitmap_idx,
- p_spq->p_comp_bitmap)) {
- __clear_bit(p_spq->comp_bitmap_idx,
- p_spq->p_comp_bitmap);
- p_spq->comp_bitmap_idx++;
- qed_chain_return_produced(&p_spq->chain);
- }
-
+ qed_spq_comp_bmap_update(p_hwfn, echo);
p_spq->comp_count++;
found = p_ent;
break;
@@ -932,11 +937,9 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
QED_MSG_SPQ,
"Got a completion without a callback function\n");
- if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) ||
- (found->queue == &p_spq->unlimited_pending))
+ if (found->comp_mode != QED_SPQ_MODE_EBLOCK)
/* EBLOCK is responsible for returning its own entry into the
- * free list, unless it originally added the entry into the
- * unlimited pending list.
+ * free list.
*/
qed_spq_return_entry(p_hwfn, found);
--
2.17.1
From: Jacob Keller <[email protected]>
[ Upstream commit ba766b8b99c30ad3c55ed8cf224d1185ecff1476 ]
Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for
outer checksum", 2017-04-06) the i40e driver has not reported support
for IP-in-IP offloads. This likely occurred due to a bad rebase, as the
commit extracts hw_enc_features into its own variable. As part of this
change, it dropped the NETIF_F_FSO_IPXIP flags from the
netdev->hw_enc_features. This was unfortunately not caught during code
review.
Fix this by adding back the missing feature flags.
For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a
("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20),
replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT.
NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support
for IPv6 IP-in-IP offload", 2016-05-20).
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ac685ad4d877..6eccfa82ca94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11926,6 +11926,8 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_PARTIAL |
+ NETIF_F_GSO_IPXIP4 |
+ NETIF_F_GSO_IPXIP6 |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_SCTP_CRC |
--
2.17.1
From: Chinh T Cao <[email protected]>
[ Upstream commit ffe498237b36ee42624e139b21efa05da4ff1f48 ]
Since the req_speeds field in struct ice_link_status is a u8,
req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught
by a coverity scan.
Fix this by changing req_speeds to be u16.
Reported-by: Bruce Allan <[email protected]>
Signed-off-by: Chinh T Cao <[email protected]>
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_type.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 97c366e0ca59..ba11b5898833 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -83,12 +83,12 @@ struct ice_link_status {
u64 phy_type_low;
u16 max_frame_size;
u16 link_speed;
+ u16 req_speeds;
u8 lse_ena; /* Link Status Event notification */
u8 link_info;
u8 an_info;
u8 ext_info;
u8 pacing;
- u8 req_speeds;
/* Refer to #define from module_type[ICE_MODULE_TYPE_TOTAL_BYTE] of
* ice_aqc_get_phy_caps structure
*/
--
2.17.1
From: Vignesh R <[email protected]>
[ Upstream commit 5b277402deac0691226a947df71c581686bd4020 ]
Allow I2C_OMAP to be built for K3 platforms.
Signed-off-by: Vignesh R <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 451d4ae50e66..ac4b09642f63 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -751,7 +751,7 @@ config I2C_OCORES
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP || ARCH_K3
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
--
2.17.1
From: Jiri Olsa <[email protected]>
[ Upstream commit 8e88c29b351ed4e09dd63f825f1c8260b0cb0ab3 ]
Andi reported following malfunction:
# perf record -e '{ref-cycles,cycles}:S' -a sleep 1
# perf script
non matching sample_id_all
That's because we disable sample_id_all bit for non-sampling group
members. We can't do that, because it needs to be the same over the
whole event list. This patch keeps it untouched again.
Reported-by: Andi Kleen <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Fixes: e9add8bac6c6 ("perf evsel: Disable write_backward for leader sampling group events")
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/attr/test-record-group-sampling | 1 -
tools/perf/util/evsel.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/tools/perf/tests/attr/test-record-group-sampling b/tools/perf/tests/attr/test-record-group-sampling
index 8a33ca4f9e1f..f0729c454f16 100644
--- a/tools/perf/tests/attr/test-record-group-sampling
+++ b/tools/perf/tests/attr/test-record-group-sampling
@@ -37,4 +37,3 @@ sample_freq=0
sample_period=0
freq=0
write_backward=0
-sample_id_all=0
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index e596ae358c4d..03a72310315f 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -952,7 +952,6 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts,
attr->sample_freq = 0;
attr->sample_period = 0;
attr->write_backward = 0;
- attr->sample_id_all = 0;
}
if (opts->no_samples)
--
2.17.1
From: Brett Creeley <[email protected]>
[ Upstream commit d944b46992f8e99b6bdc721e44b02e5ca294fa2b ]
Currently if the driver does a TSO offload the bytecount sent to
netdev_tx_sent_queue will be incorrect. This is because in ice_tso we
overwrite the initial value that we set in ice_tx_map. This creates a
mismatch between the Tx and Tx clean flow. In the Tx clean flow we
calculate the bytecount (called total_bytes) as we clean the
descriptors so the value used in the Tx clean path is correct. Fix this
by using += in ice_tso instead of =. This fixes the mismatch in
bytecount mentioned above.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index 6481e3d86374..0c95c8f83432 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -1519,7 +1519,7 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off)
/* update gso_segs and bytecount */
first->gso_segs = skb_shinfo(skb)->gso_segs;
- first->bytecount = (first->gso_segs - 1) * off->header_len;
+ first->bytecount += (first->gso_segs - 1) * off->header_len;
cd_tso_len = skb->len - off->header_len;
cd_mss = skb_shinfo(skb)->gso_size;
--
2.17.1
From: Akeem G Abodunrin <[email protected]>
[ Upstream commit 0f5d4c21a50716f8bd4e220544b82dca7408d113 ]
Setting Rx or Tx pause parameter currently results in link loss on the
interface, requiring the platform/host to be cold power cycled. Fix it.
Signed-off-by: Akeem G Abodunrin <[email protected]>
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index c71a9b528d6d..0717d2e1ab67 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -786,10 +786,15 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
}
if (!test_bit(__ICE_DOWN, pf->state)) {
- /* Give it a little more time to try to come back */
+ /* Give it a little more time to try to come back. If still
+ * down, restart autoneg link or reinitialize the interface.
+ */
msleep(75);
if (!test_bit(__ICE_DOWN, pf->state))
return ice_nway_reset(netdev);
+
+ ice_down(vsi);
+ ice_up(vsi);
}
return err;
--
2.17.1
From: Vasily Averin <[email protected]>
[ Upstream commit eb6984fa4ce2837dcb1f66720a600f31b0bb3739 ]
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write()
should not return bh = NULL
The only time that bh could be NULL, then, would be in the case of
something really going wrong; a programming error elsewhere (perhaps a
wild pointer dereference) or I/O error causing on-disk file system
corruption (although that would be highly unlikely given that we had
*just* allocated the blocks and so the metadata blocks in question
probably would still be in the cache).
Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.13
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/xattr.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index f36fc5d5b257..302725176571 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1388,6 +1388,12 @@ retry:
bh = ext4_getblk(handle, ea_inode, block, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
+ if (!bh) {
+ WARN_ON_ONCE(1);
+ EXT4_ERROR_INODE(ea_inode,
+ "ext4_getblk() return bh = NULL");
+ return -EFSCORRUPTED;
+ }
ret = ext4_journal_get_write_access(handle, bh);
if (ret)
goto out;
--
2.17.1
From: Valentin Schneider <[email protected]>
[ Upstream commit 40fa3780bac2b654edf23f6b13f4e2dd550aea10 ]
When running on linux-next (8c60c36d0b8c ("Add linux-next specific files
for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g.
Juno or HiKey960), we get the following report:
[ 0.748225] Call trace:
[ 0.750685] lockdep_assert_cpus_held+0x30/0x40
[ 0.755236] static_key_enable_cpuslocked+0x20/0xc8
[ 0.760137] build_sched_domains+0x1034/0x1108
[ 0.764601] sched_init_domains+0x68/0x90
[ 0.768628] sched_init_smp+0x30/0x80
[ 0.772309] kernel_init_freeable+0x278/0x51c
[ 0.776685] kernel_init+0x10/0x108
[ 0.780190] ret_from_fork+0x10/0x18
The static_key in question is 'sched_asym_cpucapacity' introduced by
commit:
df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
In this particular case, we enable it because smp_prepare_cpus() will
end up fetching the capacity-dmips-mhz entry from the devicetree,
so we already have some asymmetry detected when entering sched_init_smp().
This didn't get detected in tip/sched/core because we were missing:
commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")
Calls to build_sched_domains() post sched_init_smp() will hold the
hotplug lock, it just so happens that this very first call is a
special case. As stated by a comment in sched_init_smp(), "There's no
userspace yet to cause hotplug operations" so this is a harmless
warning.
However, to both respect the semantics of underlying
callees and make lockdep happy, take the hotplug lock in
sched_init_smp(). This also satisfies the comment atop
sched_init_domains() that says "Callers must hold the hotplug lock".
Reported-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index ad97f3ba5ec5..35551110d277 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5854,11 +5854,14 @@ void __init sched_init_smp(void)
/*
* There's no userspace yet to cause hotplug operations; hence all the
* CPU masks are stable and all blatant races in the below code cannot
- * happen.
+ * happen. The hotplug lock is nevertheless taken to satisfy lockdep,
+ * but there won't be any contention on it.
*/
+ cpus_read_lock();
mutex_lock(&sched_domains_mutex);
sched_init_domains(cpu_active_mask);
mutex_unlock(&sched_domains_mutex);
+ cpus_read_unlock();
/* Move init over to a non-isolated CPU */
if (set_cpus_allowed_ptr(current, housekeeping_cpumask(HK_FLAG_DOMAIN)) < 0)
--
2.17.1
From: Stephen Boyd <[email protected]>
[ Upstream commit 848bd3f3de9d44950c00eda6c115e8e9785440da ]
We need to enable runtime PM on this i2c controller before populating
child devices with i2c_add_adapter(). Otherwise, if a child device uses
runtime PM and stays runtime PM enabled we'll get the following warning
at boot.
Enabling runtime PM for inactive device (a98000.i2c) with active children
[...]
Call trace:
pm_runtime_enable+0xd8/0xf8
geni_i2c_probe+0x440/0x460
platform_drv_probe+0x74/0xc8
[...]
Let's move the runtime PM enabling and setup to before we add the
adapter, so that this device can respond to runtime PM requests from
children.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 9f2eb02481d3..d7329177b0ea 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -590,18 +590,19 @@ static int geni_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
- ret = i2c_add_adapter(&gi2c->adap);
- if (ret) {
- dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
- return ret;
- }
-
gi2c->suspended = 1;
pm_runtime_set_suspended(gi2c->se.dev);
pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
pm_runtime_use_autosuspend(gi2c->se.dev);
pm_runtime_enable(gi2c->se.dev);
+ ret = i2c_add_adapter(&gi2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+ pm_runtime_disable(gi2c->se.dev);
+ return ret;
+ }
+
return 0;
}
@@ -609,8 +610,8 @@ static int geni_i2c_remove(struct platform_device *pdev)
{
struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
- pm_runtime_disable(gi2c->se.dev);
i2c_del_adapter(&gi2c->adap);
+ pm_runtime_disable(gi2c->se.dev);
return 0;
}
--
2.17.1
From: Lyude Paul <[email protected]>
[ Upstream commit 63237f8748bdf46dccf79ef8f98f05e9fe799162 ]
[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:
[ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 160.697234] PGD 0 P4D 0
[ 160.697814] Oops: 0010 [#1] SMP PTI
[ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2
[ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[ 160.700322] RIP: 0010: (null)
[ 160.700920] Code: Bad RIP value.
[ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.708372] Call Trace:
[ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[ 160.710284] ? wake_up_q+0x54/0x70
[ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[ 160.714013] ? process_one_work+0x1a1/0x3a0
[ 160.714667] ? worker_thread+0x30/0x380
[ 160.715326] ? wq_update_unbound_numa+0x10/0x10
[ 160.715939] ? kthread+0x112/0x130
[ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70
[ 160.717262] ? ret_from_fork+0x35/0x40
[ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[ 160.720141] CR2: 0000000000000000
Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.
[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 4b08359e18bd..4cc45a1d21db 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -317,12 +317,7 @@ dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector)
struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_encoder *amdgpu_encoder;
struct drm_encoder *encoder;
- const struct drm_connector_helper_funcs *connector_funcs =
- connector->base.helper_private;
- struct drm_encoder *enc_master =
- connector_funcs->best_encoder(&connector->base);
- DRM_DEBUG_KMS("enc master is %p\n", enc_master);
amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL);
if (!amdgpu_encoder)
return NULL;
--
2.17.1
From: Sagi Grimberg <[email protected]>
[ Upstream commit 8f676b8508c250bbe255096522fdefb73f1ea0b9 ]
Whenever we update ns_head info, we need to make sure it is still
compatible with all underlying backing devices because although nvme
multipath doesn't have any explicit use of these limits, other devices
can still be stacked on top of it which may rely on the underlying limits.
Start with unlimited stacking limits, and every info update iterate over
siblings and adjust queue limits.
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 4 +++-
drivers/nvme/host/multipath.c | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 6bb9908bf46f..0ba301f7e8b4 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1519,8 +1519,10 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
if (ns->ndev)
nvme_nvm_update_nvm_info(ns);
#ifdef CONFIG_NVME_MULTIPATH
- if (ns->head->disk)
+ if (ns->head->disk) {
nvme_update_disk_info(ns->head->disk, ns, id);
+ blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
+ }
#endif
}
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 9fe3fff818b8..0b1dfcbd4631 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -250,6 +250,7 @@ int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl, struct nvme_ns_head *head)
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
/* set to a default value for 512 until disk is validated */
blk_queue_logical_block_size(q, 512);
+ blk_set_stacking_limits(&q->limits);
/* we need to propagate up the VMC settings */
if (ctrl->vwc & NVME_CTRL_VWC_PRESENT)
--
2.17.1
From: Robin Murphy <[email protected]>
[ Upstream commit 6778be4e520959659b27a441c06a84c9cb009085 ]
of_dma_configure() was *supposed* to be following the same logic as
acpi_dma_configure() and only setting bus_dma_mask if some range was
specified by the firmware. However, it seems that subtlety got lost in
the process of fitting it into the differently-shaped control flow, and
as a result the force_dma==true case ends up always setting the bus mask
to the 32-bit default, which is not what anyone wants.
Make sure we only touch it if the DT actually said so.
Fixes: 6c2fb2ea7636 ("of/device: Set bus DMA mask as appropriate")
Reported-by: Aaro Koskinen <[email protected]>
Reported-by: Jean-Philippe Brucker <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Tested-by: John Stultz <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Tested-by: Robert Richter <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/device.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 5957cd4fa262..40b9051a7fce 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -149,9 +149,11 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
* set by the driver.
*/
mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1);
- dev->bus_dma_mask = mask;
dev->coherent_dma_mask &= mask;
*dev->dma_mask &= mask;
+ /* ...but only set bus mask if we found valid dma-ranges earlier */
+ if (!ret)
+ dev->bus_dma_mask = mask;
coherent = of_dma_is_coherent(np);
dev_dbg(dev, "device is%sdma coherent\n",
--
2.17.1
From: Christian Hewitt <[email protected]>
[ Upstream commit e2576c8bdfd462c34b8a46c0084e7c30b0851bf4 ]
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
with reboot; e.g. a ~60 second delay between issuing reboot and the
board power cycling (and in some OS configurations reboot will fail
and require manual power cycling).
Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk:
meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4
Co-Processor seems to depend on FCLK_DIV3 being operational.
Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk:
meson: add fdiv clock gates"), this clock was modeled and left on by
the bootloader.
We don't have precise documentation about the SCPI Co-Processor and
its clock requirement so we are learning things the hard way.
Marking this clock as critical solves the problem but it should not
be viewed as final solution. Ideally, the SCPI driver should claim
these clocks. We also depends on some clock hand-off mechanism
making its way to CCF, to make sure the clock stays on between its
registration and the SCPI driver probe.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Christian Hewitt <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/gxbb.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 86d3ae58e84c..6435d86118f1 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -522,6 +522,18 @@ static struct clk_regmap gxbb_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.17.1
From: Jerome Brunet <[email protected]>
[ Upstream commit d6ee1e7e9004d3d246cdfa14196989e0a9466c16 ]
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.
Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Jerome Brunet <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/axg.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 00ce62ad6416..8cf74fc423e6 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -319,6 +319,7 @@ static struct clk_regmap axg_fclk_div2 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div2_div" },
.num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
},
};
@@ -343,6 +344,18 @@ static struct clk_regmap axg_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.17.1
From: Luis Henriques <[email protected]>
[ Upstream commit 71f2cc64d027d712f29bf8d09d3e123302d5f245 ]
This patch fixes a possible null pointer dereference in
check_quota_exceeded, detected by the static checker smatch, with the
following warning:
fs/ceph/quota.c:240 check_quota_exceeded()
error: we previously assumed 'realm' could be null (see line 188)
Fixes: b7a2921765cf ("ceph: quota: support for ceph.quota.max_files")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/quota.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/quota.c b/fs/ceph/quota.c
index 32d4f13784ba..03f4d24db8fe 100644
--- a/fs/ceph/quota.c
+++ b/fs/ceph/quota.c
@@ -237,7 +237,8 @@ static bool check_quota_exceeded(struct inode *inode, enum quota_check_op op,
ceph_put_snap_realm(mdsc, realm);
realm = next;
}
- ceph_put_snap_realm(mdsc, realm);
+ if (realm)
+ ceph_put_snap_realm(mdsc, realm);
up_read(&mdsc->snap_rwsem);
return exceeded;
--
2.17.1
From: Thomas Richter <[email protected]>
[ Upstream commit 0bb2ae1b26e1fb7543ec7474cdd374ac4b88c4da ]
The function perf_init_event() creates a new event and
assignes it to a PMU. This a done in a loop over all existing
PMUs. For each listed PMU the event init function is called
and if this function does return any other error than -ENOENT,
the loop is terminated the creation of the event fails.
If the event is invalid, return -ENOENT to try other PMUs.
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Hendrik Brueckner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/perf_cpum_cf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index cc085e2d2ce9..74091fd3101e 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -373,7 +373,7 @@ static int __hw_perf_event_init(struct perf_event *event)
return -ENOENT;
if (ev > PERF_CPUM_CF_MAX_CTR)
- return -EINVAL;
+ return -ENOENT;
/* Obtain the counter set to which the specified counter belongs */
set = get_counter_set(ev);
--
2.17.1
From: Rob Herring <[email protected]>
[ Upstream commit 1af6ab3bac8458fc2e92ad7bb97b62de4a1fddef ]
A quoted label reference doesn't expand to the node path and is taken as
a literal string. Dropping the quotes can fix this unless the baudrate
string is appended in which case we have to use the alias.
At least on VF610, the problem was masked by setting the console in
bootargs. Use the alias syntax with baudrate parameter so we can drop
setting the console in bootargs.
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Mark Rutland <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx53-ppd.dts | 2 +-
arch/arm/boot/dts/vf610m4-colibri.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index cdb90bee7b4a..f202396e3f2a 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -55,7 +55,7 @@
};
chosen {
- stdout-path = "&uart1:115200n8";
+ stdout-path = "serial0:115200n8";
};
memory@70000000 {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index 41ec66a96990..ca6249558760 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -50,8 +50,8 @@
compatible = "fsl,vf610m4";
chosen {
- bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
- stdout-path = "&uart2";
+ bootargs = "clk_ignore_unused init=/linuxrc rw";
+ stdout-path = "serial2:115200";
};
memory@8c000000 {
--
2.17.1
From: Harry Wentland <[email protected]>
[ Upstream commit 02680efbb10be0d2c867fe722ae23d588f6bebef ]
[Why]
drm_plane_cleanup does not free the plane.
[How]
Call drm_primary_helper_destroy which will also free the plane.
Signed-off-by: Harry Wentland <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6903fe6c894b..ef5c6af4d964 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3167,7 +3167,7 @@ void dm_drm_plane_destroy_state(struct drm_plane *plane,
static const struct drm_plane_funcs dm_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
- .destroy = drm_plane_cleanup,
+ .destroy = drm_primary_helper_destroy,
.reset = dm_drm_plane_reset,
.atomic_duplicate_state = dm_drm_plane_duplicate_state,
.atomic_destroy_state = dm_drm_plane_destroy_state,
--
2.17.1
From: Keith Busch <[email protected]>
[ Upstream commit f3587d76da05f68098ddb1cb3c98cc6a9e8a402c ]
If the kernel allocates a bounce buffer for user read data, this memory
needs to be cleared before copying it to the user, otherwise it may leak
kernel memory to user space.
Laurence Oberman <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/block/bio.c b/block/bio.c
index 0093bed81c0e..41173710430c 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1261,6 +1261,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
if (ret)
goto cleanup;
} else {
+ zero_fill_bio(bio);
iov_iter_advance(iter, bio->bi_iter.bi_size);
}
--
2.17.1
From: Jeremy Linton <[email protected]>
[ Upstream commit 313a06e636808387822af24c507cba92703568b1 ]
The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.
Once this is correctly enabled, the neon recovery objects
need to be added to the build.
Reviewed-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Jeremy Linton <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/raid6/test/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 5d73f5cb4d8a..79777645cac9 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -27,7 +27,7 @@ ifeq ($(ARCH),arm)
CFLAGS += -I../../../arch/arm/include -mfpu=neon
HAS_NEON = yes
endif
-ifeq ($(ARCH),arm64)
+ifeq ($(ARCH),aarch64)
CFLAGS += -I../../../arch/arm64/include
HAS_NEON = yes
endif
@@ -41,7 +41,7 @@ ifeq ($(IS_X86),yes)
gcc -c -x assembler - >&/dev/null && \
rm ./-.o && echo -DCONFIG_AS_AVX512=1)
else ifeq ($(HAS_NEON),yes)
- OBJS += neon.o neon1.o neon2.o neon4.o neon8.o
+ OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1
else
HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\
--
2.17.1
From: Inki Dae <[email protected]>
[ Upstream commit 6ca469e22a30992b4478d2ab88737c70667c1e00 ]
This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b
This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.
However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.
Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.
Signed-off-by: Inki Dae <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 9 ---------
drivers/gpu/drm/exynos/exynos_drm_crtc.c | 11 -----------
drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 -
3 files changed, 21 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 94529aa82339..aef487dd8731 100644
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -164,13 +164,6 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
return frm;
}
-static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc)
-{
- struct decon_context *ctx = crtc->ctx;
-
- return decon_get_frame_count(ctx, false);
-}
-
static void decon_setup_trigger(struct decon_context *ctx)
{
if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
@@ -536,7 +529,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
.disable = decon_disable,
.enable_vblank = decon_enable_vblank,
.disable_vblank = decon_disable_vblank,
- .get_vblank_counter = decon_get_vblank_counter,
.atomic_begin = decon_atomic_begin,
.update_plane = decon_update_plane,
.disable_plane = decon_disable_plane,
@@ -554,7 +546,6 @@ static int decon_bind(struct device *dev, struct device *master, void *data)
int ret;
ctx->drm_dev = drm_dev;
- drm_dev->max_vblank_count = 0xffffffff;
for (win = ctx->first_win; win < WINDOWS_NR; win++) {
ctx->configs[win].pixel_formats = decon_formats;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index eea90251808f..2696289ecc78 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -162,16 +162,6 @@ static void exynos_drm_crtc_disable_vblank(struct drm_crtc *crtc)
exynos_crtc->ops->disable_vblank(exynos_crtc);
}
-static u32 exynos_drm_crtc_get_vblank_counter(struct drm_crtc *crtc)
-{
- struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-
- if (exynos_crtc->ops->get_vblank_counter)
- return exynos_crtc->ops->get_vblank_counter(exynos_crtc);
-
- return 0;
-}
-
static const struct drm_crtc_funcs exynos_crtc_funcs = {
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
@@ -181,7 +171,6 @@ static const struct drm_crtc_funcs exynos_crtc_funcs = {
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
.enable_vblank = exynos_drm_crtc_enable_vblank,
.disable_vblank = exynos_drm_crtc_disable_vblank,
- .get_vblank_counter = exynos_drm_crtc_get_vblank_counter,
};
struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index c737c4bd2c19..630f1edc5de2 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -133,7 +133,6 @@ struct exynos_drm_crtc_ops {
void (*disable)(struct exynos_drm_crtc *crtc);
int (*enable_vblank)(struct exynos_drm_crtc *crtc);
void (*disable_vblank)(struct exynos_drm_crtc *crtc);
- u32 (*get_vblank_counter)(struct exynos_drm_crtc *crtc);
enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode);
bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
--
2.17.1
From: Liam Merwick <[email protected]>
[ Upstream commit d9cccfa7c4d1d9ef967ec9308df7304a18609b30 ]
If a call to xenmem_reservation_increase() in gnttab_dma_free_pages()
fails it triggers a message "Failed to decrease reservation..." which
should be "Failed to increase reservation..."
Fixes: 9bdc7304f536 ('xen/grant-table: Allow allocating buffers suitable for DMA')
Reported-by: Ross Philipson <[email protected]>
Signed-off-by: Liam Merwick <[email protected]>
Reviewed-by: Mark Kanda <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/grant-table.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 84575baceebc..97341fa75458 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -914,7 +914,7 @@ int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args)
ret = xenmem_reservation_increase(args->nr_pages, args->frames);
if (ret != args->nr_pages) {
- pr_debug("Failed to decrease reservation for DMA buffer\n");
+ pr_debug("Failed to increase reservation for DMA buffer\n");
ret = -EFAULT;
} else {
ret = 0;
--
2.17.1
From: Kuninori Morimoto <[email protected]>
[ Upstream commit aab7a2414ba0d5c3d0571a90031b535adba7146a ]
hscif2 has 4 dmas, but has only 2 dma-names.
This patch add missing dma-names.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Fixes: e0f0bda79337701a ("arm64: dts: renesas: r8a7795: sort subnodes
of the soc node")
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index fb9d08ad7659..c87eed77de2c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -662,7 +662,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>,
<&dmac2 0x35>, <&dmac2 0x34>;
- dma-names = "tx", "rx";
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 518>;
status = "disabled";
--
2.17.1
From: Leonard Crestez <[email protected]>
[ Upstream commit 1ad9fb750a104f51851c092edd7b3553f0218428 ]
Bindings for "fixed-regulator" only explicitly support "gpio" property,
not "gpios". Fix by correcting the property name.
The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
cycle, this can be handled by the phy-reset-gpios property. Sadly this
is not handled on suspend: the fec driver turns phy-supply off but
doesn't assert phy-reset-gpios again on resume.
Since additional phy-level work is required to support powering off the
phy in suspend fix the problem by just marking the regulator as
"boot-on" "always-on" so that it's never turned off. This behavior is
equivalent to older releases.
Keep the phy-reset-gpios property on fec anyway because it is a correct
description of board design.
This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
Convert to use GPIO descriptor only") which causes the "gpios" property
to also be parsed. Before that commit the "gpios" property had no
effect, PHY reset was only handled in the the bootloader.
This fixes linux-next boot failures previously reported here:
https://lore.kernel.org/patchwork/patch/982437/#1177900
https://lore.kernel.org/patchwork/patch/994091/#1178304
Signed-off-by: Leonard Crestez <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx6sx-sdb.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f8f31872fa14..d6d517e4922f 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -115,7 +115,9 @@
regulator-name = "enet_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_pcie_gpio: regulator-pcie-gpio {
@@ -178,6 +180,7 @@
phy-supply = <®_enet_3v3>;
phy-mode = "rgmii";
phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -371,6 +374,8 @@
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ /* phy reset */
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0
>;
};
--
2.17.1
From: Shalom Toledo <[email protected]>
[ Upstream commit 96801552f846460fe9ac10f1b189602992f004e1 ]
The CPU policer used to police packets being trapped via a local route
(IP2ME) was incorrectly configured to police based on bytes per second
instead of packets per second.
Change the policer to police based on packets per second and avoid
packet loss under certain circumstances.
Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups")
Signed-off-by: Shalom Toledo <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 30bb2c533cec..ada644d90029 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -3519,7 +3519,6 @@ static int mlxsw_sp_cpu_policers_set(struct mlxsw_core *mlxsw_core)
burst_size = 7;
break;
case MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME:
- is_bytes = true;
rate = 4 * 1024;
burst_size = 4;
break;
--
2.17.1
From: "Jerry (Fangzhi) Zuo" <[email protected]>
[ Upstream commit 0e6613e46fed29316f33acf86e1d1568288638b5 ]
[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.
[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.
Signed-off-by: Jerry (Fangzhi) Zuo <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 2 -
.../display/amdgpu_dm/amdgpu_dm_mst_types.c | 40 ++++---------------
2 files changed, 7 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index a29dc35954c9..aba2c5c1d2f8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -173,8 +173,6 @@ struct amdgpu_dm_connector {
struct mutex hpd_lock;
bool fake_enable;
-
- bool mst_connected;
};
#define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 9a300732ba37..4b08359e18bd 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -352,25 +352,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_dm_connector *aconnector;
struct drm_connector *connector;
- struct drm_connector_list_iter conn_iter;
-
- drm_connector_list_iter_begin(dev, &conn_iter);
- drm_for_each_connector_iter(connector, &conn_iter) {
- aconnector = to_amdgpu_dm_connector(connector);
- if (aconnector->mst_port == master
- && !aconnector->port) {
- DRM_INFO("DM_MST: reusing connector: %p [id: %d] [master: %p]\n",
- aconnector, connector->base.id, aconnector->mst_port);
-
- aconnector->port = port;
- drm_connector_set_path_property(connector, pathprop);
-
- drm_connector_list_iter_end(&conn_iter);
- aconnector->mst_connected = true;
- return &aconnector->base;
- }
- }
- drm_connector_list_iter_end(&conn_iter);
aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL);
if (!aconnector)
@@ -419,8 +400,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
*/
amdgpu_dm_connector_funcs_reset(connector);
- aconnector->mst_connected = true;
-
DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n",
aconnector, connector->base.id, aconnector->mst_port);
@@ -432,6 +411,9 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct drm_connector *connector)
{
+ struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr);
+ struct drm_device *dev = master->base.dev;
+ struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n",
@@ -445,7 +427,10 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
aconnector->dc_sink = NULL;
}
- aconnector->mst_connected = false;
+ drm_connector_unregister(connector);
+ if (adev->mode_info.rfbdev)
+ drm_fb_helper_remove_one_connector(&adev->mode_info.rfbdev->helper, connector);
+ drm_connector_put(connector);
}
static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
@@ -456,18 +441,10 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
drm_kms_helper_hotplug_event(dev);
}
-static void dm_dp_mst_link_status_reset(struct drm_connector *connector)
-{
- mutex_lock(&connector->dev->mode_config.mutex);
- drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD);
- mutex_unlock(&connector->dev->mode_config.mutex);
-}
-
static void dm_dp_mst_register_connector(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct amdgpu_device *adev = dev->dev_private;
- struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
if (adev->mode_info.rfbdev)
drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector);
@@ -475,9 +452,6 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector)
DRM_ERROR("adev->mode_info.rfbdev is NULL\n");
drm_connector_register(connector);
-
- if (aconnector->mst_connected)
- dm_dp_mst_link_status_reset(connector);
}
static const struct drm_dp_mst_topology_cbs dm_mst_cbs = {
--
2.17.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ]
If gcc decides not to inline make_sensor_label():
WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label()
The function .create_device_attrs() references
the function __init .make_sensor_label().
This is often because .create_device_attrs lacks a __init
annotation or the annotation of .make_sensor_label is wrong.
As .probe() can be called after freeing of __init memory, all __init
annotiations in the driver are bogus, and should be removed.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/ibmpowernv.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 83472808c816..64d05edff130 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -181,7 +181,7 @@ static ssize_t show_label(struct device *dev, struct device_attribute *devattr,
return sprintf(buf, "%s\n", sdata->label);
}
-static int __init get_logical_cpu(int hwcpu)
+static int get_logical_cpu(int hwcpu)
{
int cpu;
@@ -192,9 +192,8 @@ static int __init get_logical_cpu(int hwcpu)
return -ENOENT;
}
-static void __init make_sensor_label(struct device_node *np,
- struct sensor_data *sdata,
- const char *label)
+static void make_sensor_label(struct device_node *np,
+ struct sensor_data *sdata, const char *label)
{
u32 id;
size_t n;
--
2.17.1
From: Holger Hoffstätte <[email protected]>
[ Upstream commit 0432e833191ad4d17b7fc2364941f91dad51db1a ]
Since 4.19 the following error in sysfs has appeared when using the
r8169 NIC driver:
$cd /sys/module/realtek/drivers
$ls -l
ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory
[..garbled dir entries follow..]
Apparently the forward slash in "10/100Mbps Ethernet" is interpreted
as directory separator that leads nowhere, and was introduced in commit
513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions").
Fix this by removing the offending slash in the driver name.
Other drivers in net/phy seem to have the same problem, but I cannot
test/verify them.
Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions")
Signed-off-by: Holger Hoffstätte <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/realtek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7fc8508b5231..271e8adc39f1 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = {
.flags = PHY_HAS_INTERRUPT,
}, {
.phy_id = 0x001cc816,
- .name = "RTL8201F 10/100Mbps Ethernet",
+ .name = "RTL8201F Fast Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
--
2.17.1
From: Boris Brezillon <[email protected]>
[ Upstream commit 98ee3fc7ef8395f8b7a379e6608aee91efc66d48 ]
Function name is wrong in the kernel-doc header.
Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices")
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/mtd/nand.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index abe975c87b90..ad8f0325c027 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -569,7 +569,7 @@ static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
}
/**
- * nanddev_pos_next_eraseblock() - Move a position to the next page
+ * nanddev_pos_next_page() - Move a position to the next page
* @nand: NAND device
* @pos: the position to update
*
--
2.17.1
From: Ricardo Ribalda Delgado <[email protected]>
[ Upstream commit f98e8a572bddbf27032114127d2fcc78fa5e6a9d ]
When the fixed factor clock is created by devicetree,
of_clk_add_provider is called. Add a call to
of_clk_del_provider in the remove function to balance
it out.
Reported-by: Alan Tull <[email protected]>
Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver")
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-fixed-factor.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 20724abd38bd..7df6b5b1e7ee 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -210,6 +210,7 @@ static int of_fixed_factor_clk_remove(struct platform_device *pdev)
{
struct clk *clk = platform_get_drvdata(pdev);
+ of_clk_del_provider(pdev->dev.of_node);
clk_unregister_fixed_factor(clk);
return 0;
--
2.17.1
From: Sergei Shtylyov <[email protected]>
[ Upstream commit eab53fdfd60a84b0cc514d4f1f5d79226c76df01 ]
The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!
Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../boot/dts/renesas/r8a77980-condor.dts | 47 ++++++++++---------
1 file changed, 24 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 9f25c407dfd7..e830b6162375 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -15,7 +15,7 @@
aliases {
serial0 = &scif0;
- ethernet0 = &avb;
+ ethernet0 = &gether;
};
chosen {
@@ -47,23 +47,6 @@
};
};
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii-id";
- phy-handle = <&phy0>;
- renesas,no-ether-link;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
@@ -82,6 +65,23 @@
clock-frequency = <32768>;
};
+&gether {
+ pinctrl-0 = <&gether_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@@ -118,16 +118,17 @@
};
&pfc {
- avb_pins: avb {
- groups = "avb_mdio", "avb_rgmii";
- function = "avb";
- };
-
canfd0_pins: canfd0 {
groups = "canfd0_data_a";
function = "canfd0";
};
+ gether_pins: gether {
+ groups = "gether_mdio_a", "gether_rgmii",
+ "gether_txcrefclk", "gether_txcrefclk_mega";
+ function = "gether";
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
--
2.17.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit bd74a7f9cc033cf4d405788f80292268987dc0c5 ]
Sniffing mode for L3 HiperSockets requires that no IP addresses are
registered with the HW. The preferred way to achieve this is for
userspace to delete all the IPs on the interface. But qeth is expected
to also tolerate a configuration where that is not the case, by skipping
the IP registration when in sniffer mode.
Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
reworked the IP registration logic in the L3 subdriver, this no longer
works. When the qeth device is set online, qeth_l3_recover_ip() now
unconditionally registers all unicast addresses from our internal
IP table.
While we could fix this particular problem by skipping
qeth_l3_recover_ip() on a sniffer device, the more future-proof change
is to skip the IP address registration at the lowest level. This way we
a) catch any future code path that attempts to register an IP address
without considering the sniffer scenario, and
b) continue to build up our internal IP table, so that if sniffer mode
is switched off later we can operate just like normal.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_l3_main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index ada258c01a08..17e2fd584fbf 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -279,9 +279,6 @@ static void qeth_l3_clear_ip_htable(struct qeth_card *card, int recover)
QETH_CARD_TEXT(card, 4, "clearip");
- if (recover && card->options.sniffer)
- return;
-
spin_lock_bh(&card->ip_lock);
hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) {
@@ -664,6 +661,8 @@ static int qeth_l3_register_addr_entry(struct qeth_card *card,
int rc = 0;
int cnt = 3;
+ if (card->options.sniffer)
+ return 0;
if (addr->proto == QETH_PROT_IPV4) {
QETH_CARD_TEXT(card, 2, "setaddr4");
@@ -698,6 +697,9 @@ static int qeth_l3_deregister_addr_entry(struct qeth_card *card,
{
int rc = 0;
+ if (card->options.sniffer)
+ return 0;
+
if (addr->proto == QETH_PROT_IPV4) {
QETH_CARD_TEXT(card, 2, "deladdr4");
QETH_CARD_HEX(card, 3, &addr->u.a4.addr, sizeof(int));
--
2.17.1
From: Andrey Ryabinin <[email protected]>
[ Upstream commit ed956f3947a01ff9875cd908d7c1ef1fe7f47bf0 ]
ip_set_create() and ip_set_net_init() attempt to allocate physically
contiguous memory for ip_set_list. If memory is fragmented, the
allocations could easily fail:
vzctl: page allocation failure: order:7, mode:0xc0d0
Call Trace:
dump_stack+0x19/0x1b
warn_alloc_failed+0x110/0x180
__alloc_pages_nodemask+0x7bf/0xc60
alloc_pages_current+0x98/0x110
kmalloc_order+0x18/0x40
kmalloc_order_trace+0x26/0xa0
__kmalloc+0x279/0x290
ip_set_net_init+0x4b/0x90 [ip_set]
ops_init+0x3b/0xb0
setup_net+0xbb/0x170
copy_net_ns+0xf1/0x1c0
create_new_namespaces+0xf9/0x180
copy_namespaces+0x8e/0xd0
copy_process+0xb61/0x1a00
do_fork+0x91/0x320
Use kvcalloc() to fallback to 0-order allocations if high order
page isn't available.
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipset/ip_set_core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index fa15a831aeee..68db946df151 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -960,7 +960,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl,
/* Wraparound */
goto cleanup;
- list = kcalloc(i, sizeof(struct ip_set *), GFP_KERNEL);
+ list = kvcalloc(i, sizeof(struct ip_set *), GFP_KERNEL);
if (!list)
goto cleanup;
/* nfnl mutex is held, both lists are valid */
@@ -972,7 +972,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl,
/* Use new list */
index = inst->ip_set_max;
inst->ip_set_max = i;
- kfree(tmp);
+ kvfree(tmp);
ret = 0;
} else if (ret) {
goto cleanup;
@@ -2058,7 +2058,7 @@ ip_set_net_init(struct net *net)
if (inst->ip_set_max >= IPSET_INVALID_ID)
inst->ip_set_max = IPSET_INVALID_ID - 1;
- list = kcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL);
+ list = kvcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL);
if (!list)
return -ENOMEM;
inst->is_deleted = false;
@@ -2086,7 +2086,7 @@ ip_set_net_exit(struct net *net)
}
}
nfnl_unlock(NFNL_SUBSYS_IPSET);
- kfree(rcu_dereference_protected(inst->ip_set_list, 1));
+ kvfree(rcu_dereference_protected(inst->ip_set_list, 1));
}
static struct pernet_operations ip_set_net_ops = {
--
2.17.1
From: Yunsheng Lin <[email protected]>
[ Upstream commit e8ccbb7d2f53c62e14b889faaa3f6f809b657278 ]
The vport should be initialized to hdev->vport for each bp group,
otherwise it will cause out-of-bounds access and bp setting not
correct problem.
[ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge]
[ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14
[ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85
[ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018
[ 35.254141] Workqueue: events work_for_cpu_fn
[ 35.254144] Call trace:
[ 35.254147] dump_backtrace+0x0/0x2f0
[ 35.254149] show_stack+0x24/0x30
[ 35.254154] dump_stack+0x110/0x184
[ 35.254157] print_address_description+0x168/0x2b0
[ 35.254160] kasan_report+0x184/0x310
[ 35.254162] __asan_load2+0x7c/0xa0
[ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge]
[ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge]
[ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge]
[ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge]
[ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3]
[ 35.254206] hns3_probe+0x88/0xa8 [hns3]
[ 35.254210] local_pci_probe+0x7c/0xf0
[ 35.254212] work_for_cpu_fn+0x34/0x50
[ 35.254214] process_one_work+0x4d4/0xa38
[ 35.254216] worker_thread+0x55c/0x8d8
[ 35.254219] kthread+0x1b0/0x1b8
[ 35.254222] ret_from_fork+0x10/0x1c
[ 35.254224] The buggy address belongs to the page:
[ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0
[ 35.273835] flags: 0xfffff8000008000(head)
[ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000
[ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 35.282012] page dumped because: kasan: bad access detected
[ 35.282014] Memory state around the buggy address:
[ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
[ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
[ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
[ 35.282022] ^
[ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
[ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
[ 35.282028] ==================================================================
[ 35.282029] Disabling lock debugging due to kernel taint
[ 35.282747] hclge driver initialization finished.
Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 5db70a1451c5..48235dc2dd56 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1167,14 +1167,14 @@ static int hclge_pfc_setup_hw(struct hclge_dev *hdev)
*/
static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
{
- struct hclge_vport *vport = hdev->vport;
- u32 i, k, qs_bitmap;
- int ret;
+ int i;
for (i = 0; i < HCLGE_BP_GRP_NUM; i++) {
- qs_bitmap = 0;
+ u32 qs_bitmap = 0;
+ int k, ret;
for (k = 0; k < hdev->num_alloc_vport; k++) {
+ struct hclge_vport *vport = &hdev->vport[k];
u16 qs_id = vport->qs_offset + tc;
u8 grp, sub_grp;
@@ -1184,8 +1184,6 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
HCLGE_BP_SUB_GRP_ID_S);
if (i == grp)
qs_bitmap |= (1 << sub_grp);
-
- vport++;
}
ret = hclge_tm_qs_bp_cfg(hdev, tc, i, qs_bitmap);
--
2.17.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit 30356d08159d7899438e94503ae322a8b881e205 ]
qeth only registers its netdevice when the qeth device is first set
online. Thus a device that has never been set online will trigger
a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when
removed.
Fix this by protecting the unregister step, just like we already protect
against repeated registering of the netdevice.
Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early")
Reported-by: Karsten Graul <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_core.h | 5 +++++
drivers/s390/net/qeth_l2_main.c | 5 +++--
drivers/s390/net/qeth_l3_main.c | 5 +++--
3 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 34e0d476c5c6..970654fcc48d 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -826,6 +826,11 @@ struct qeth_trap_id {
/*some helper functions*/
#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "")
+static inline bool qeth_netdev_is_registered(struct net_device *dev)
+{
+ return dev->netdev_ops != NULL;
+}
+
static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf,
unsigned int elements)
{
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index b5e38531733f..76b2fba5fba2 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -854,7 +854,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
if (cgdev->state == CCWGROUP_ONLINE)
qeth_l2_set_offline(cgdev);
- unregister_netdev(card->dev);
+ if (qeth_netdev_is_registered(card->dev))
+ unregister_netdev(card->dev);
}
static const struct ethtool_ops qeth_l2_ethtool_ops = {
@@ -894,7 +895,7 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
{
int rc;
- if (card->dev->netdev_ops)
+ if (qeth_netdev_is_registered(card->dev))
return 0;
card->dev->priv_flags |= IFF_UNICAST_FLT;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 17e2fd584fbf..b7f6a8384543 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2514,7 +2514,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
{
int rc;
- if (card->dev->netdev_ops)
+ if (qeth_netdev_is_registered(card->dev))
return 0;
if (card->info.type == QETH_CARD_TYPE_OSD ||
@@ -2611,7 +2611,8 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
if (cgdev->state == CCWGROUP_ONLINE)
qeth_l3_set_offline(cgdev);
- unregister_netdev(card->dev);
+ if (qeth_netdev_is_registered(card->dev))
+ unregister_netdev(card->dev);
qeth_l3_clear_ip_htable(card, 0);
qeth_l3_clear_ipato_list(card);
}
--
2.17.1
From: Jozsef Kadlecsik <[email protected]>
[ Upstream commit 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 ]
The function is called when rcu_read_lock() is held and not
when rcu_read_lock_bh() is held.
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/netfilter/ipset/ip_set_comment.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/netfilter/ipset/ip_set_comment.h b/include/linux/netfilter/ipset/ip_set_comment.h
index 8e2bab1e8e90..70877f8de7e9 100644
--- a/include/linux/netfilter/ipset/ip_set_comment.h
+++ b/include/linux/netfilter/ipset/ip_set_comment.h
@@ -43,11 +43,11 @@ ip_set_init_comment(struct ip_set *set, struct ip_set_comment *comment,
rcu_assign_pointer(comment->c, c);
}
-/* Used only when dumping a set, protected by rcu_read_lock_bh() */
+/* Used only when dumping a set, protected by rcu_read_lock() */
static inline int
ip_set_put_comment(struct sk_buff *skb, const struct ip_set_comment *comment)
{
- struct ip_set_comment_rcu *c = rcu_dereference_bh(comment->c);
+ struct ip_set_comment_rcu *c = rcu_dereference(comment->c);
if (!c)
return 0;
--
2.17.1
From: Martin Schwidefsky <[email protected]>
[ Upstream commit e12e4044aede97974f2222eb7f0ed726a5179a32 ]
In case a fork or a clone system fails in copy_process and the error
handling does the mmput() at the bad_fork_cleanup_mm label, the
following warning messages will appear on the console:
BUG: non-zero pgtables_bytes on freeing mm: 16384
The reason for that is the tricks we play with mm_inc_nr_puds() and
mm_inc_nr_pmds() in init_new_context().
A normal 64-bit process has 3 levels of page table, the p4d level and
the pud level are folded. On process termination the free_pud_range()
function in mm/memory.c will subtract 16KB from pgtable_bytes with a
mm_dec_nr_puds() call, but there actually is not really a pud table.
One issue with this is the fact that pgtable_bytes is usually off
by a few kilobytes, but the more severe problem is that for a failed
fork or clone the free_pgtables() function is not called. In this case
there is no mm_dec_nr_puds() or mm_dec_nr_pmds() that go together with
the mm_inc_nr_puds() and mm_inc_nr_pmds in init_new_context().
The pgtable_bytes will be off by 16384 or 32768 bytes and we get the
BUG message. The message itself is purely cosmetic, but annoying.
To fix this override the mm_pmd_folded, mm_pud_folded and mm_p4d_folded
function to check for the true size of the address space.
Reported-by: Li Wang <[email protected]>
Tested-by: Li Wang <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/include/asm/mmu_context.h | 5 -----
arch/s390/include/asm/pgalloc.h | 6 +++---
arch/s390/include/asm/pgtable.h | 18 ++++++++++++++++++
arch/s390/include/asm/tlb.h | 6 +++---
arch/s390/mm/pgalloc.c | 1 +
5 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 0717ee76885d..f1ab9420ccfb 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -45,8 +45,6 @@ static inline int init_new_context(struct task_struct *tsk,
mm->context.asce_limit = STACK_TOP_MAX;
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_REGION3;
- /* pgd_alloc() did not account this pud */
- mm_inc_nr_puds(mm);
break;
case -PAGE_SIZE:
/* forked 5-level task, set new asce with new_mm->pgd */
@@ -62,9 +60,6 @@ static inline int init_new_context(struct task_struct *tsk,
/* forked 2-level compat task, set new asce with new mm->pgd */
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
- /* pgd_alloc() did not account this pmd */
- mm_inc_nr_pmds(mm);
- mm_inc_nr_puds(mm);
}
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
return 0;
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index f0f9bcf94c03..5ee733720a57 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -36,11 +36,11 @@ static inline void crst_table_init(unsigned long *crst, unsigned long entry)
static inline unsigned long pgd_entry_type(struct mm_struct *mm)
{
- if (mm->context.asce_limit <= _REGION3_SIZE)
+ if (mm_pmd_folded(mm))
return _SEGMENT_ENTRY_EMPTY;
- if (mm->context.asce_limit <= _REGION2_SIZE)
+ if (mm_pud_folded(mm))
return _REGION3_ENTRY_EMPTY;
- if (mm->context.asce_limit <= _REGION1_SIZE)
+ if (mm_p4d_folded(mm))
return _REGION2_ENTRY_EMPTY;
return _REGION1_ENTRY_EMPTY;
}
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 0e7cb0dc9c33..de05466ce50c 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -485,6 +485,24 @@ static inline int is_module_addr(void *addr)
_REGION_ENTRY_PROTECT | \
_REGION_ENTRY_NOEXEC)
+static inline bool mm_p4d_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION1_SIZE;
+}
+#define mm_p4d_folded(mm) mm_p4d_folded(mm)
+
+static inline bool mm_pud_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION2_SIZE;
+}
+#define mm_pud_folded(mm) mm_pud_folded(mm)
+
+static inline bool mm_pmd_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION3_SIZE;
+}
+#define mm_pmd_folded(mm) mm_pmd_folded(mm)
+
static inline int mm_has_pgste(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 457b7ba0fbb6..b31c779cf581 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -136,7 +136,7 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION3_SIZE)
+ if (mm_pmd_folded(tlb->mm))
return;
pgtable_pmd_page_dtor(virt_to_page(pmd));
tlb_remove_table(tlb, pmd);
@@ -152,7 +152,7 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION1_SIZE)
+ if (mm_p4d_folded(tlb->mm))
return;
tlb_remove_table(tlb, p4d);
}
@@ -167,7 +167,7 @@ static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d,
static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION2_SIZE)
+ if (mm_pud_folded(tlb->mm))
return;
tlb_remove_table(tlb, pud);
}
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index 76d89ee8b428..814f26520aa2 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -101,6 +101,7 @@ int crst_table_upgrade(struct mm_struct *mm, unsigned long end)
mm->context.asce_limit = _REGION1_SIZE;
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+ mm_inc_nr_puds(mm);
} else {
crst_table_init(table, _REGION1_ENTRY_EMPTY);
pgd_populate(mm, (pgd_t *) table, (p4d_t *) pgd);
--
2.17.1
From: Oleksij Rempel <[email protected]>
[ Upstream commit 438ad09af5581b7024850b5dbb6353c7f2f7d8a9 ]
Fix the type of compatible string "fs,imx6sll-i2c" which should be
"fsl,imx6sll-i2c".
Signed-off-by: Oleksij Rempel <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx6sll.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 000e6136a9d6..3e6ffaf5f104 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -709,7 +709,7 @@
i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C1>;
--
2.17.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit 28c2fae726bf5003cd209b0d5910a642af98316f ]
While dbecd7388476 ("bpf: get kernel symbol addresses via syscall")
zeroed info.nr_jited_ksyms in bpf_prog_get_info_by_fd() for queries
from unprivileged users, commit 815581c11cc2 ("bpf: get JITed image
lengths of functions via syscall") forgot about doing so and therefore
returns the #elems of the user set up buffer which is incorrect. It
also needs to indicate a info.nr_jited_func_lens of zero.
Fixes: 815581c11cc2 ("bpf: get JITed image lengths of functions via syscall")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/syscall.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 8339d81cba1d..3002e3cdc033 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1961,6 +1961,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
info.jited_prog_len = 0;
info.xlated_prog_len = 0;
info.nr_jited_ksyms = 0;
+ info.nr_jited_func_lens = 0;
goto done;
}
--
2.17.1
From: Florian Westphal <[email protected]>
[ Upstream commit e4844c9c62a0fe47980d6c3d4b7a096a5d755925 ]
Unlike ip(6)tables, the ebtables nat table has no special properties.
This bug causes 'ebtables -A' to fail when using a target such as
'snat' (ebt_snat target sets ".table = "nat"'). Targets that have
no table restrictions work fine.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_compat.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 32535eea51b2..ad2fe6a7e47d 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -54,9 +54,11 @@ static bool nft_xt_put(struct nft_xt *xt)
return false;
}
-static int nft_compat_chain_validate_dependency(const char *tablename,
- const struct nft_chain *chain)
+static int nft_compat_chain_validate_dependency(const struct nft_ctx *ctx,
+ const char *tablename)
{
+ enum nft_chain_types type = NFT_CHAIN_T_DEFAULT;
+ const struct nft_chain *chain = ctx->chain;
const struct nft_base_chain *basechain;
if (!tablename ||
@@ -64,9 +66,12 @@ static int nft_compat_chain_validate_dependency(const char *tablename,
return 0;
basechain = nft_base_chain(chain);
- if (strcmp(tablename, "nat") == 0 &&
- basechain->type->type != NFT_CHAIN_T_NAT)
- return -EINVAL;
+ if (strcmp(tablename, "nat") == 0) {
+ if (ctx->family != NFPROTO_BRIDGE)
+ type = NFT_CHAIN_T_NAT;
+ if (basechain->type->type != type)
+ return -EINVAL;
+ }
return 0;
}
@@ -323,8 +328,7 @@ static int nft_target_validate(const struct nft_ctx *ctx,
if (target->hooks && !(hook_mask & target->hooks))
return -EINVAL;
- ret = nft_compat_chain_validate_dependency(target->table,
- ctx->chain);
+ ret = nft_compat_chain_validate_dependency(ctx, target->table);
if (ret < 0)
return ret;
}
@@ -570,8 +574,7 @@ static int nft_match_validate(const struct nft_ctx *ctx,
if (match->hooks && !(hook_mask & match->hooks))
return -EINVAL;
- ret = nft_compat_chain_validate_dependency(match->table,
- ctx->chain);
+ ret = nft_compat_chain_validate_dependency(ctx, match->table);
if (ret < 0)
return ret;
}
--
2.17.1
From: Tristram Ha <[email protected]>
[ Upstream commit 284fb78ed7572117846f8e1d1d8e3dbfd16880c2 ]
Initialize mutex before use. Avoid kernel complaint when
CONFIG_DEBUG_LOCK_ALLOC is enabled.
Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz_common.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 54e0ca6ed730..86b6464b4525 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1117,11 +1117,6 @@ static int ksz_switch_init(struct ksz_device *dev)
{
int i;
- mutex_init(&dev->reg_mutex);
- mutex_init(&dev->stats_mutex);
- mutex_init(&dev->alu_mutex);
- mutex_init(&dev->vlan_mutex);
-
dev->ds->ops = &ksz_switch_ops;
for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
@@ -1206,6 +1201,11 @@ int ksz_switch_register(struct ksz_device *dev)
if (dev->pdata)
dev->chip_id = dev->pdata->chip_id;
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
if (ksz_switch_detect(dev))
return -EINVAL;
--
2.17.1
From: "Justin M. Forbes" <[email protected]>
[ Upstream commit a541f0ebcc08ed8bc0cc492eec9a86cb280a9f24 ]
Fixes:
ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1275: modules] Error 2
+ exit 1
Signed-off-by: Justin M. Forbes <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/numa/numa.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/s390/numa/numa.c b/arch/s390/numa/numa.c
index 5bd374491f94..6c151b42e65d 100644
--- a/arch/s390/numa/numa.c
+++ b/arch/s390/numa/numa.c
@@ -54,6 +54,7 @@ int __node_distance(int a, int b)
{
return mode->distance ? mode->distance(a, b) : 0;
}
+EXPORT_SYMBOL(__node_distance);
int numa_debug_enabled;
--
2.17.1
From: Eric Westbrook <[email protected]>
[ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ]
Allow /0 as advertised for hash:net,port,net sets.
For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."
Make that statement true.
Before:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
After:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
# ipset test cidrzero 192.168.205.129,12345,172.16.205.129
192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
# ipset test cidrzero6 fe80::1,12345,ff00::1
fe80::1,tcp:12345,ff00::1 is in set cidrzero6.
See also:
https://bugzilla.kernel.org/show_bug.cgi?id=200897
https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c
Signed-off-by: Eric Westbrook <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipset/ip_set_hash_netportnet.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/ipset/ip_set_hash_netportnet.c b/net/netfilter/ipset/ip_set_hash_netportnet.c
index d391485a6acd..613e18e720a4 100644
--- a/net/netfilter/ipset/ip_set_hash_netportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_netportnet.c
@@ -213,13 +213,13 @@ hash_netportnet4_uadt(struct ip_set *set, struct nlattr *tb[],
if (tb[IPSET_ATTR_CIDR]) {
e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]);
- if (!e.cidr[0] || e.cidr[0] > HOST_MASK)
+ if (e.cidr[0] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
if (tb[IPSET_ATTR_CIDR2]) {
e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]);
- if (!e.cidr[1] || e.cidr[1] > HOST_MASK)
+ if (e.cidr[1] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
@@ -493,13 +493,13 @@ hash_netportnet6_uadt(struct ip_set *set, struct nlattr *tb[],
if (tb[IPSET_ATTR_CIDR]) {
e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]);
- if (!e.cidr[0] || e.cidr[0] > HOST_MASK)
+ if (e.cidr[0] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
if (tb[IPSET_ATTR_CIDR2]) {
e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]);
- if (!e.cidr[1] || e.cidr[1] > HOST_MASK)
+ if (e.cidr[1] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
--
2.17.1
From: Jozsef Kadlecsik <[email protected]>
[ Upstream commit 8a02bdd50b2ecb6d62121d2958d3ea186cc88ce7 ]
The ip_set() macro is called when either ip_set_ref_lock held only
or no lock/nfnl mutex is held at dumping. Take this into account
properly. Also, use Pablo's suggestion to use rcu_dereference_raw(),
the ref_netlink protects the set.
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipset/ip_set_core.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 68db946df151..1577f2f76060 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -55,11 +55,15 @@ MODULE_AUTHOR("Jozsef Kadlecsik <[email protected]>");
MODULE_DESCRIPTION("core IP set support");
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_IPSET);
-/* When the nfnl mutex is held: */
+/* When the nfnl mutex or ip_set_ref_lock is held: */
#define ip_set_dereference(p) \
- rcu_dereference_protected(p, lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET))
+ rcu_dereference_protected(p, \
+ lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET) || \
+ lockdep_is_held(&ip_set_ref_lock))
#define ip_set(inst, id) \
ip_set_dereference((inst)->ip_set_list)[id]
+#define ip_set_ref_netlink(inst,id) \
+ rcu_dereference_raw((inst)->ip_set_list)[id]
/* The set types are implemented in modules and registered set types
* can be found in ip_set_type_list. Adding/deleting types is
@@ -1251,7 +1255,7 @@ ip_set_dump_done(struct netlink_callback *cb)
struct ip_set_net *inst =
(struct ip_set_net *)cb->args[IPSET_CB_NET];
ip_set_id_t index = (ip_set_id_t)cb->args[IPSET_CB_INDEX];
- struct ip_set *set = ip_set(inst, index);
+ struct ip_set *set = ip_set_ref_netlink(inst, index);
if (set->variant->uref)
set->variant->uref(set, cb, false);
@@ -1440,7 +1444,7 @@ next_set:
release_refcount:
/* If there was an error or set is done, release set */
if (ret || !cb->args[IPSET_CB_ARG0]) {
- set = ip_set(inst, index);
+ set = ip_set_ref_netlink(inst, index);
if (set->variant->uref)
set->variant->uref(set, cb, false);
pr_debug("release set %s\n", set->name);
--
2.17.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ]
When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.
test commands:
%iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"
splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755] dump_stack+0xc9/0x16b
[95765.449755] ? show_regs_print_info+0x5/0x5
[95765.449755] sysfs_warn_dup+0x74/0x90
[95765.449755] sysfs_add_file_mode_ns+0x352/0x500
[95765.449755] sysfs_create_file_ns+0x179/0x270
[95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755] ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755] ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755] ? memcpy+0x34/0x50
[95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]
Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/xt_IDLETIMER.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 5ee859193783..25453a16385e 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -116,6 +116,22 @@ static void idletimer_tg_expired(struct timer_list *t)
schedule_work(&timer->work);
}
+static int idletimer_check_sysfs_name(const char *name, unsigned int size)
+{
+ int ret;
+
+ ret = xt_check_proc_name(name, size);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(name, "power") ||
+ !strcmp(name, "subsystem") ||
+ !strcmp(name, "uevent"))
+ return -EINVAL;
+
+ return 0;
+}
+
static int idletimer_tg_create(struct idletimer_tg_info *info)
{
int ret;
@@ -126,6 +142,10 @@ static int idletimer_tg_create(struct idletimer_tg_info *info)
goto out;
}
+ ret = idletimer_check_sysfs_name(info->label, sizeof(info->label));
+ if (ret < 0)
+ goto out_free_timer;
+
sysfs_attr_init(&info->timer->attr.attr);
info->timer->attr.attr.name = kstrdup(info->label, GFP_KERNEL);
if (!info->timer->attr.attr.name) {
--
2.17.1
From: Stefano Brivio <[email protected]>
[ Upstream commit 439cd39ea136d2c026805264d58a91f36b6b64ca ]
Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash
when flush/dump set in parallel") postponed decreasing set
reference counters to the RCU callback.
An 'ipset del' command can terminate before the RCU grace period
is elapsed, and if sets are listed before then, the reference
counter shown in userspace will be wrong:
# ipset create h hash:ip; ipset create l list:set; ipset add l
# ipset del l h; ipset list h
Name: h
Type: hash:ip
Revision: 4
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 88
References: 1
Number of entries: 0
Members:
# sleep 1; ipset list h
Name: h
Type: hash:ip
Revision: 4
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 88
References: 0
Number of entries: 0
Members:
Fix this by making the reference count update synchronous again.
As a result, when sets are listed, ip_set_name_byindex() might
now fetch a set whose reference count is already zero. Instead
of relying on the reference count to protect against concurrent
set renaming, grab ip_set_ref_lock as reader and copy the name,
while holding the same lock in ip_set_rename() as writer
instead.
Reported-by: Li Shuang <[email protected]>
Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/netfilter/ipset/ip_set.h | 2 +-
net/netfilter/ipset/ip_set_core.c | 23 +++++++++++------------
net/netfilter/ipset/ip_set_list_set.c | 17 +++++++++++------
3 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h
index 34fc80f3eb90..1d100efe74ec 100644
--- a/include/linux/netfilter/ipset/ip_set.h
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -314,7 +314,7 @@ enum {
extern ip_set_id_t ip_set_get_byname(struct net *net,
const char *name, struct ip_set **set);
extern void ip_set_put_byindex(struct net *net, ip_set_id_t index);
-extern const char *ip_set_name_byindex(struct net *net, ip_set_id_t index);
+extern void ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name);
extern ip_set_id_t ip_set_nfnl_get_byindex(struct net *net, ip_set_id_t index);
extern void ip_set_nfnl_put(struct net *net, ip_set_id_t index);
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index bc4bd247bb7d..fa15a831aeee 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -693,21 +693,20 @@ ip_set_put_byindex(struct net *net, ip_set_id_t index)
EXPORT_SYMBOL_GPL(ip_set_put_byindex);
/* Get the name of a set behind a set index.
- * We assume the set is referenced, so it does exist and
- * can't be destroyed. The set cannot be renamed due to
- * the referencing either.
- *
+ * Set itself is protected by RCU, but its name isn't: to protect against
+ * renaming, grab ip_set_ref_lock as reader (see ip_set_rename()) and copy the
+ * name.
*/
-const char *
-ip_set_name_byindex(struct net *net, ip_set_id_t index)
+void
+ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name)
{
- const struct ip_set *set = ip_set_rcu_get(net, index);
+ struct ip_set *set = ip_set_rcu_get(net, index);
BUG_ON(!set);
- BUG_ON(set->ref == 0);
- /* Referenced, so it's safe */
- return set->name;
+ read_lock_bh(&ip_set_ref_lock);
+ strncpy(name, set->name, IPSET_MAXNAMELEN);
+ read_unlock_bh(&ip_set_ref_lock);
}
EXPORT_SYMBOL_GPL(ip_set_name_byindex);
@@ -1153,7 +1152,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl,
if (!set)
return -ENOENT;
- read_lock_bh(&ip_set_ref_lock);
+ write_lock_bh(&ip_set_ref_lock);
if (set->ref != 0) {
ret = -IPSET_ERR_REFERENCED;
goto out;
@@ -1170,7 +1169,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl,
strncpy(set->name, name2, IPSET_MAXNAMELEN);
out:
- read_unlock_bh(&ip_set_ref_lock);
+ write_unlock_bh(&ip_set_ref_lock);
return ret;
}
diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c
index 072a658fde04..4eef55da0878 100644
--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -148,9 +148,7 @@ __list_set_del_rcu(struct rcu_head * rcu)
{
struct set_elem *e = container_of(rcu, struct set_elem, rcu);
struct ip_set *set = e->set;
- struct list_set *map = set->data;
- ip_set_put_byindex(map->net, e->id);
ip_set_ext_destroy(set, e);
kfree(e);
}
@@ -158,15 +156,21 @@ __list_set_del_rcu(struct rcu_head * rcu)
static inline void
list_set_del(struct ip_set *set, struct set_elem *e)
{
+ struct list_set *map = set->data;
+
set->elements--;
list_del_rcu(&e->list);
+ ip_set_put_byindex(map->net, e->id);
call_rcu(&e->rcu, __list_set_del_rcu);
}
static inline void
-list_set_replace(struct set_elem *e, struct set_elem *old)
+list_set_replace(struct ip_set *set, struct set_elem *e, struct set_elem *old)
{
+ struct list_set *map = set->data;
+
list_replace_rcu(&old->list, &e->list);
+ ip_set_put_byindex(map->net, old->id);
call_rcu(&old->rcu, __list_set_del_rcu);
}
@@ -298,7 +302,7 @@ list_set_uadd(struct ip_set *set, void *value, const struct ip_set_ext *ext,
INIT_LIST_HEAD(&e->list);
list_set_init_extensions(set, ext, e);
if (n)
- list_set_replace(e, n);
+ list_set_replace(set, e, n);
else if (next)
list_add_tail_rcu(&e->list, &next->list);
else if (prev)
@@ -486,6 +490,7 @@ list_set_list(const struct ip_set *set,
const struct list_set *map = set->data;
struct nlattr *atd, *nested;
u32 i = 0, first = cb->args[IPSET_CB_ARG0];
+ char name[IPSET_MAXNAMELEN];
struct set_elem *e;
int ret = 0;
@@ -504,8 +509,8 @@ list_set_list(const struct ip_set *set,
nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
if (!nested)
goto nla_put_failure;
- if (nla_put_string(skb, IPSET_ATTR_NAME,
- ip_set_name_byindex(map->net, e->id)))
+ ip_set_name_byindex(map->net, e->id, name);
+ if (nla_put_string(skb, IPSET_ATTR_NAME, name))
goto nla_put_failure;
if (ip_set_put_extensions(skb, set, e, true))
goto nla_put_failure;
--
2.17.1
From: Benjamin Tissoires <[email protected]>
[ Upstream commit 7dd8db68949a7acc5bd528ee0ecb8f8720f49921 ]
If userspace only reads the trackstick node, and no one is listening to
the touchpad nor the hidraw node then, the device is not powered on.
Add open/close callbacks to allow users to disable the touchpad in Gnome
while keeping the trackstick active.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1559632
Link: https://gitlab.gnome.org/GNOME/mutter/issues/128
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-alps.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index aec253b44156..3cd7229b6e54 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -660,6 +660,20 @@ exit:
return ret;
}
+static int alps_sp_open(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ return hid_hw_open(hid);
+}
+
+static void alps_sp_close(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ hid_hw_close(hid);
+}
+
static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
struct alps_dev *data = hid_get_drvdata(hdev);
@@ -733,6 +747,10 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
input2->id.version = input->id.version;
input2->dev.parent = input->dev.parent;
+ input_set_drvdata(input2, hdev);
+ input2->open = alps_sp_open;
+ input2->close = alps_sp_close;
+
__set_bit(EV_KEY, input2->evbit);
data->sp_btn_cnt = (data->sp_btn_info & 0x0F);
for (i = 0; i < data->sp_btn_cnt; i++)
--
2.17.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 7cb6a2a2c72c1ed8f42fb01f1a661281b568dead ]
A timing hazard exists when the network interface is stopped that
allows a watchdog timeout to be processed by a separate core in
parallel. This creates the potential for the timeout handler to
wake the queues while the driver is shutting down, or access
registers after their clocks have been removed.
The more common case is that the watchdog timeout will produce a
warning message which doesn't lead to a crash. The chances of this
are greatly increased by the fact that bcm_sysport_netif_stop stops
the transmit queues which can easily precipitate a watchdog time-
out because of stale trans_start data in the queues.
This commit corrects the behavior by ensuring that the watchdog
timeout is disabled before enterring bcm_sysport_netif_stop. There
are currently only two users of the bcm_sysport_netif_stop function:
close and suspend.
The close case already handles the issue by exiting the RUNNING
state before invoking the driver close service.
The suspend case now performs the netif_device_detach to exit the
PRESENT state before the call to bcm_sysport_netif_stop rather than
after it.
These behaviors prevent any future scheduling of the driver timeout
service during the window. The netif_tx_stop_all_queues function
in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure
synchronization with any transmit or timeout threads that may
already be executing on other cores.
For symmetry, the netif_device_attach call upon resume is moved to
after the call to bcm_sysport_netif_start. Since it wakes the transmit
queues it is not necessary to invoke netif_tx_start_all_queues from
bcm_sysport_netif_start so it is moved into the driver open service.
Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support")
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index c57238fce863..7b6859e4924e 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1897,9 +1897,6 @@ static void bcm_sysport_netif_start(struct net_device *dev)
intrl2_1_mask_clear(priv, 0xffffffff);
else
intrl2_0_mask_clear(priv, INTRL2_0_TDMA_MBDONE_MASK);
-
- /* Last call before we start the real business */
- netif_tx_start_all_queues(dev);
}
static void rbuf_init(struct bcm_sysport_priv *priv)
@@ -2045,6 +2042,8 @@ static int bcm_sysport_open(struct net_device *dev)
bcm_sysport_netif_start(dev);
+ netif_tx_start_all_queues(dev);
+
return 0;
out_clear_rx_int:
@@ -2068,7 +2067,7 @@ static void bcm_sysport_netif_stop(struct net_device *dev)
struct bcm_sysport_priv *priv = netdev_priv(dev);
/* stop all software from updating hardware */
- netif_tx_stop_all_queues(dev);
+ netif_tx_disable(dev);
napi_disable(&priv->napi);
cancel_work_sync(&priv->dim.dim.work);
phy_stop(dev->phydev);
@@ -2654,12 +2653,12 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d)
if (!netif_running(dev))
return 0;
+ netif_device_detach(dev);
+
bcm_sysport_netif_stop(dev);
phy_suspend(dev->phydev);
- netif_device_detach(dev);
-
/* Disable UniMAC RX */
umac_enable_set(priv, CMD_RX_EN, 0);
@@ -2743,8 +2742,6 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
goto out_free_rx_ring;
}
- netif_device_attach(dev);
-
/* RX pipe enable */
topctrl_writel(priv, 0, RX_FLUSH_CNTL);
@@ -2789,6 +2786,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
bcm_sysport_netif_start(dev);
+ netif_device_attach(dev);
+
return 0;
out_free_rx_ring:
--
2.17.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 00b790ea545b6ef30221adef6e9c3707e03b82b5 ]
Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
although it works in display manager.
During user logging, the display manager exits, close the HID device,
then the device gets runtime suspended and powered off. The desktop
session begins shortly after, opens the HID device, then the device gets
runtime resumed and powered on.
If the trasition from display manager to desktop sesesion is fast, the
touchpanel cannot switch from powered off to powered on in short
timeframe. So add a small delay to workaround the issue.
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/i2c-hid/i2c-hid.c | 19 +++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index bc49909aba8e..636b9d903b26 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -921,6 +921,9 @@
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define I2C_VENDOR_ID_RAYDIUM 0x2386
+#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
+
#define USB_VENDOR_ID_RAZER 0x1532
#define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 4e3592e7a3f7..88daa388e1f6 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -48,6 +48,7 @@
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
+#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
/* flags */
#define I2C_HID_STARTED 0
@@ -157,6 +158,8 @@ struct i2c_hid {
bool irq_wake_enabled;
struct mutex reset_lock;
+
+ unsigned long sleep_delay;
};
static const struct i2c_hid_quirks {
@@ -171,6 +174,8 @@ static const struct i2c_hid_quirks {
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
I2C_HID_QUIRK_NO_RUNTIME_PM },
+ { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
+ I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ 0, 0 }
};
@@ -386,6 +391,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
+ unsigned long now, delay;
i2c_hid_dbg(ihid, "%s\n", __func__);
@@ -403,9 +409,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
goto set_pwr_exit;
}
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_ON) {
+ now = jiffies;
+ if (time_after(ihid->sleep_delay, now)) {
+ delay = jiffies_to_usecs(ihid->sleep_delay - now);
+ usleep_range(delay, delay + 1);
+ }
+ }
+
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_SLEEP)
+ ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
+
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
--
2.17.1
From: Florian Westphal <[email protected]>
[ Upstream commit 61792b677415b77c8db04991c22966bb8de7603e ]
Unlike ipv4 and normal ipv6 defrag, netfilter ipv6 defragmentation did
not save/restore skb->dst.
This causes oops when handling locally generated ipv6 fragments, as
output path needs a valid dst.
Reported-by: Maciej Żenczykowski <[email protected]>
Fixes: 84379c9afe01 ("netfilter: ipv6: nf_defrag: drop skb dst before queueing")
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/netfilter/nf_conntrack_reasm.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 8f68a518d9db..f76bd4d15704 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -587,11 +587,16 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
*/
ret = -EINPROGRESS;
if (fq->q.flags == (INET_FRAG_FIRST_IN | INET_FRAG_LAST_IN) &&
- fq->q.meat == fq->q.len &&
- nf_ct_frag6_reasm(fq, skb, dev))
- ret = 0;
- else
+ fq->q.meat == fq->q.len) {
+ unsigned long orefdst = skb->_skb_refdst;
+
+ skb->_skb_refdst = 0UL;
+ if (nf_ct_frag6_reasm(fq, skb, dev))
+ ret = 0;
+ skb->_skb_refdst = orefdst;
+ } else {
skb_dst_drop(skb);
+ }
out_unlock:
spin_unlock_bh(&fq->q.lock);
--
2.17.1
From: Doug Berger <[email protected]>
[ Upstream commit 09e805d2570a3a94f13dd9c9ad2bcab23da76e09 ]
A timing hazard exists when the network interface is stopped that
allows a watchdog timeout to be processed by a separate core in
parallel. This creates the potential for the timeout handler to
wake the queues while the driver is shutting down, or access
registers after their clocks have been removed.
The more common case is that the watchdog timeout will produce a
warning message which doesn't lead to a crash. The chances of this
are greatly increased by the fact that bcmgenet_netif_stop stops
the transmit queues which can easily precipitate a watchdog time-
out because of stale trans_start data in the queues.
This commit corrects the behavior by ensuring that the watchdog
timeout is disabled before enterring bcmgenet_netif_stop. There
are currently only two users of the bcmgenet_netif_stop function:
close and suspend.
The close case already handles the issue by exiting the RUNNING
state before invoking the driver close service.
The suspend case now performs the netif_device_detach to exit the
PRESENT state before the call to bcmgenet_netif_stop rather than
after it.
These behaviors prevent any future scheduling of the driver timeout
service during the window. The netif_tx_stop_all_queues function
in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure
synchronization with any transmit or timeout threads that may
already be executing on other cores.
For symmetry, the netif_device_attach call upon resume is moved to
after the call to bcmgenet_netif_start. Since it wakes the transmit
queues it is not necessary to invoke netif_tx_start_all_queues from
bcmgenet_netif_start so it is moved into the driver open service.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 20c1681bb1af..2d6f090bf644 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2855,7 +2855,6 @@ static void bcmgenet_netif_start(struct net_device *dev)
umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);
- netif_tx_start_all_queues(dev);
bcmgenet_enable_tx_napi(priv);
/* Monitor link interrupts now */
@@ -2937,6 +2936,8 @@ static int bcmgenet_open(struct net_device *dev)
bcmgenet_netif_start(dev);
+ netif_tx_start_all_queues(dev);
+
return 0;
err_irq1:
@@ -2958,7 +2959,7 @@ static void bcmgenet_netif_stop(struct net_device *dev)
struct bcmgenet_priv *priv = netdev_priv(dev);
bcmgenet_disable_tx_napi(priv);
- netif_tx_stop_all_queues(dev);
+ netif_tx_disable(dev);
/* Disable MAC receive */
umac_enable_set(priv, CMD_RX_EN, false);
@@ -3620,13 +3621,13 @@ static int bcmgenet_suspend(struct device *d)
if (!netif_running(dev))
return 0;
+ netif_device_detach(dev);
+
bcmgenet_netif_stop(dev);
if (!device_may_wakeup(d))
phy_suspend(dev->phydev);
- netif_device_detach(dev);
-
/* Prepare the device for Wake-on-LAN and switch to the slow clock */
if (device_may_wakeup(d) && priv->wolopts) {
ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC);
@@ -3700,8 +3701,6 @@ static int bcmgenet_resume(struct device *d)
/* Always enable ring 16 - descriptor ring */
bcmgenet_enable_dma(priv, dma_ctrl);
- netif_device_attach(dev);
-
if (!device_may_wakeup(d))
phy_resume(dev->phydev);
@@ -3710,6 +3709,8 @@ static int bcmgenet_resume(struct device *d)
bcmgenet_netif_start(dev);
+ netif_device_attach(dev);
+
return 0;
out_clk_disable:
--
2.17.1
From: Vasily Gorbik <[email protected]>
[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ]
According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.
Reviewed-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/vdso32/Makefile | 6 +++---
arch/s390/kernel/vdso64/Makefile | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index c5c856f320bc..04dd3e2c3bd9 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -36,7 +36,7 @@ UBSAN_SANITIZE := n
$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32)
+$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE
$(call if_changed,vdso32ld)
# strip rule for the .so file
@@ -45,12 +45,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
# assembly rules for the .S files
-$(obj-vdso32): %.o: %.S
+$(obj-vdso32): %.o: %.S FORCE
$(call if_changed_dep,vdso32as)
# actual build commands
quiet_cmd_vdso32ld = VDSO32L $@
- cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@
quiet_cmd_vdso32as = VDSO32A $@
cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 15b1ceafc4c1..ddebc26cd949 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -36,7 +36,7 @@ UBSAN_SANITIZE := n
$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64)
+$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE
$(call if_changed,vdso64ld)
# strip rule for the .so file
@@ -45,12 +45,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
# assembly rules for the .S files
-$(obj-vdso64): %.o: %.S
+$(obj-vdso64): %.o: %.S FORCE
$(call if_changed_dep,vdso64as)
# actual build commands
quiet_cmd_vdso64ld = VDSO64L $@
- cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@
quiet_cmd_vdso64as = VDSO64A $@
cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
--
2.17.1
From: Frieder Schrempf <[email protected]>
[ Upstream commit 7b900ead6cc66b2ee873cb042dfba169aa68b56c ]
We need to make sure, that the carrier check polling is disabled
while suspending. Otherwise we can end up with usbnet_read_cmd()
being issued when only usbnet_read_cmd_nopm() is allowed. If this
happens, read operations lock up.
Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation")
Signed-off-by: Frieder Schrempf <[email protected]>
Reviewed-by: Raghuram Chary J <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc95xx.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 262e7a3c23cb..2d17f3b9bb16 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1598,6 +1598,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
return ret;
}
+ cancel_delayed_work_sync(&pdata->carrier_check);
+
if (pdata->suspend_flags) {
netdev_warn(dev->net, "error during last resume\n");
pdata->suspend_flags = 0;
@@ -1840,6 +1842,11 @@ done:
*/
if (ret && PMSG_IS_AUTO(message))
usbnet_resume(intf);
+
+ if (ret)
+ schedule_delayed_work(&pdata->carrier_check,
+ CARRIER_CHECK_DELAY);
+
return ret;
}
--
2.17.1
From: Benjamin Tissoires <[email protected]>
[ Upstream commit 6298944d8f57f40ee2a3e6dcea1253e78d7a9969 ]
This reverts commit 67ddbb3e6568fb1820b2cc45b00c50702b114801.
67ddbb3e656 ("HID: add NOGET quirk for Eaton Ellipse MAX UPS") was reported
by Laurent Bigonville. It turns out that a later model Laurent got
doesn't need the quirk after all.
My take is that Eaton upgraded their firmwares, so we don't need it
anymore.
The old model was from 2012, so better make sure the new line works
properly by removing the quirk. This allows upower to actually fetch
the current data.
Reported-by: Laurent Bigonville <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-quirks.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 249d49b6b16c..caafbea94882 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -106,7 +106,6 @@ static const struct hid_device_id hid_quirks[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
- { HID_USB_DEVICE(USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS), HID_QUIRK_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS },
--
2.17.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 4269fea768a11a447d8de620ce420f2214d4685c ]
Laura found a better way to do this from userspace without requiring
kernel infrastructure, revert this.
Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations")
Signed-off-by: Laura Garcia Liebana <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/netfilter/nf_tables.h | 4 +-
net/netfilter/nft_numgen.c | 127 -----------------------
2 files changed, 2 insertions(+), 129 deletions(-)
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index e23290ffdc77..325ec6ef0a76 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -1581,8 +1581,8 @@ enum nft_ng_attributes {
NFTA_NG_MODULUS,
NFTA_NG_TYPE,
NFTA_NG_OFFSET,
- NFTA_NG_SET_NAME,
- NFTA_NG_SET_ID,
+ NFTA_NG_SET_NAME, /* deprecated */
+ NFTA_NG_SET_ID, /* deprecated */
__NFTA_NG_MAX
};
#define NFTA_NG_MAX (__NFTA_NG_MAX - 1)
diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c
index 649d1700ec5b..3cc1b3dc3c3c 100644
--- a/net/netfilter/nft_numgen.c
+++ b/net/netfilter/nft_numgen.c
@@ -24,7 +24,6 @@ struct nft_ng_inc {
u32 modulus;
atomic_t counter;
u32 offset;
- struct nft_set *map;
};
static u32 nft_ng_inc_gen(struct nft_ng_inc *priv)
@@ -48,34 +47,11 @@ static void nft_ng_inc_eval(const struct nft_expr *expr,
regs->data[priv->dreg] = nft_ng_inc_gen(priv);
}
-static void nft_ng_inc_map_eval(const struct nft_expr *expr,
- struct nft_regs *regs,
- const struct nft_pktinfo *pkt)
-{
- struct nft_ng_inc *priv = nft_expr_priv(expr);
- const struct nft_set *map = priv->map;
- const struct nft_set_ext *ext;
- u32 result;
- bool found;
-
- result = nft_ng_inc_gen(priv);
- found = map->ops->lookup(nft_net(pkt), map, &result, &ext);
-
- if (!found)
- return;
-
- nft_data_copy(®s->data[priv->dreg],
- nft_set_ext_data(ext), map->dlen);
-}
-
static const struct nla_policy nft_ng_policy[NFTA_NG_MAX + 1] = {
[NFTA_NG_DREG] = { .type = NLA_U32 },
[NFTA_NG_MODULUS] = { .type = NLA_U32 },
[NFTA_NG_TYPE] = { .type = NLA_U32 },
[NFTA_NG_OFFSET] = { .type = NLA_U32 },
- [NFTA_NG_SET_NAME] = { .type = NLA_STRING,
- .len = NFT_SET_MAXNAMELEN - 1 },
- [NFTA_NG_SET_ID] = { .type = NLA_U32 },
};
static int nft_ng_inc_init(const struct nft_ctx *ctx,
@@ -101,22 +77,6 @@ static int nft_ng_inc_init(const struct nft_ctx *ctx,
NFT_DATA_VALUE, sizeof(u32));
}
-static int nft_ng_inc_map_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
-{
- struct nft_ng_inc *priv = nft_expr_priv(expr);
- u8 genmask = nft_genmask_next(ctx->net);
-
- nft_ng_inc_init(ctx, expr, tb);
-
- priv->map = nft_set_lookup_global(ctx->net, ctx->table,
- tb[NFTA_NG_SET_NAME],
- tb[NFTA_NG_SET_ID], genmask);
-
- return PTR_ERR_OR_ZERO(priv->map);
-}
-
static int nft_ng_dump(struct sk_buff *skb, enum nft_registers dreg,
u32 modulus, enum nft_ng_types type, u32 offset)
{
@@ -143,27 +103,10 @@ static int nft_ng_inc_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->offset);
}
-static int nft_ng_inc_map_dump(struct sk_buff *skb,
- const struct nft_expr *expr)
-{
- const struct nft_ng_inc *priv = nft_expr_priv(expr);
-
- if (nft_ng_dump(skb, priv->dreg, priv->modulus,
- NFT_NG_INCREMENTAL, priv->offset) ||
- nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name))
- goto nla_put_failure;
-
- return 0;
-
-nla_put_failure:
- return -1;
-}
-
struct nft_ng_random {
enum nft_registers dreg:8;
u32 modulus;
u32 offset;
- struct nft_set *map;
};
static u32 nft_ng_random_gen(struct nft_ng_random *priv)
@@ -183,25 +126,6 @@ static void nft_ng_random_eval(const struct nft_expr *expr,
regs->data[priv->dreg] = nft_ng_random_gen(priv);
}
-static void nft_ng_random_map_eval(const struct nft_expr *expr,
- struct nft_regs *regs,
- const struct nft_pktinfo *pkt)
-{
- struct nft_ng_random *priv = nft_expr_priv(expr);
- const struct nft_set *map = priv->map;
- const struct nft_set_ext *ext;
- u32 result;
- bool found;
-
- result = nft_ng_random_gen(priv);
- found = map->ops->lookup(nft_net(pkt), map, &result, &ext);
- if (!found)
- return;
-
- nft_data_copy(®s->data[priv->dreg],
- nft_set_ext_data(ext), map->dlen);
-}
-
static int nft_ng_random_init(const struct nft_ctx *ctx,
const struct nft_expr *expr,
const struct nlattr * const tb[])
@@ -226,21 +150,6 @@ static int nft_ng_random_init(const struct nft_ctx *ctx,
NFT_DATA_VALUE, sizeof(u32));
}
-static int nft_ng_random_map_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
-{
- struct nft_ng_random *priv = nft_expr_priv(expr);
- u8 genmask = nft_genmask_next(ctx->net);
-
- nft_ng_random_init(ctx, expr, tb);
- priv->map = nft_set_lookup_global(ctx->net, ctx->table,
- tb[NFTA_NG_SET_NAME],
- tb[NFTA_NG_SET_ID], genmask);
-
- return PTR_ERR_OR_ZERO(priv->map);
-}
-
static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr)
{
const struct nft_ng_random *priv = nft_expr_priv(expr);
@@ -249,22 +158,6 @@ static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->offset);
}
-static int nft_ng_random_map_dump(struct sk_buff *skb,
- const struct nft_expr *expr)
-{
- const struct nft_ng_random *priv = nft_expr_priv(expr);
-
- if (nft_ng_dump(skb, priv->dreg, priv->modulus,
- NFT_NG_RANDOM, priv->offset) ||
- nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name))
- goto nla_put_failure;
-
- return 0;
-
-nla_put_failure:
- return -1;
-}
-
static struct nft_expr_type nft_ng_type;
static const struct nft_expr_ops nft_ng_inc_ops = {
.type = &nft_ng_type,
@@ -274,14 +167,6 @@ static const struct nft_expr_ops nft_ng_inc_ops = {
.dump = nft_ng_inc_dump,
};
-static const struct nft_expr_ops nft_ng_inc_map_ops = {
- .type = &nft_ng_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_inc)),
- .eval = nft_ng_inc_map_eval,
- .init = nft_ng_inc_map_init,
- .dump = nft_ng_inc_map_dump,
-};
-
static const struct nft_expr_ops nft_ng_random_ops = {
.type = &nft_ng_type,
.size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)),
@@ -290,14 +175,6 @@ static const struct nft_expr_ops nft_ng_random_ops = {
.dump = nft_ng_random_dump,
};
-static const struct nft_expr_ops nft_ng_random_map_ops = {
- .type = &nft_ng_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)),
- .eval = nft_ng_random_map_eval,
- .init = nft_ng_random_map_init,
- .dump = nft_ng_random_map_dump,
-};
-
static const struct nft_expr_ops *
nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[])
{
@@ -312,12 +189,8 @@ nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[])
switch (type) {
case NFT_NG_INCREMENTAL:
- if (tb[NFTA_NG_SET_NAME])
- return &nft_ng_inc_map_ops;
return &nft_ng_inc_ops;
case NFT_NG_RANDOM:
- if (tb[NFTA_NG_SET_NAME])
- return &nft_ng_random_map_ops;
return &nft_ng_random_ops;
}
--
2.17.1
From: Vasily Gorbik <[email protected]>
[ Upstream commit ef5febae1543f35a45f01614123e829d77326d0f ]
According to Documentation/kbuild/makefiles.txt all build targets
using if_changed should use FORCE as well. Add missing FORCE to make
sure vmlinux decompressor targets are rebuild properly when not just
immediate prerequisites have changed but also when build command differs.
Reviewed-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/boot/compressed/Makefile | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 04609478d18b..b375c6c5ae7b 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -20,7 +20,7 @@ KBUILD_CFLAGS := $(KBUILD_CFLAGS_DECOMPRESSOR)
OBJECTS := $(addprefix $(obj)/,$(obj-y))
LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS)
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE
$(call if_changed,ld)
# extract required uncompressed vmlinux symbols and adjust them to reflect offsets inside vmlinux.bin
@@ -51,17 +51,17 @@ suffix-$(CONFIG_KERNEL_LZMA) := .lzma
suffix-$(CONFIG_KERNEL_LZO) := .lzo
suffix-$(CONFIG_KERNEL_XZ) := .xz
-$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lz4)
-$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzo)
-$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,xzkern)
LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T
--
2.17.1
From: Jiri Slaby <[email protected]>
[ Upstream commit 5a8de47b3c250521dd632cdedaac6db88367defa ]
With 4.19, programs like ebtables fail to build when they include
"linux/netfilter_bridge.h". It is caused by commit 94276fa8a2a4 which
added a use of INT_MIN and INT_MAX to the header:
: In file included from /usr/include/linux/netfilter_bridge/ebtables.h:18,
: from include/ebtables_u.h:28,
: from communication.c:23:
: /usr/include/linux/netfilter_bridge.h:30:20: error: 'INT_MIN' undeclared here (not in a function)
: NF_BR_PRI_FIRST = INT_MIN,
: ^~~~~~~
Define these constants by including "limits.h" when !__KERNEL__ (the
same way as for other netfilter_* headers).
Fixes: 94276fa8a2a4 ("netfilter: bridge: Expose nf_tables bridge hook priorities through uapi")
Signed-off-by: Jiri Slaby <[email protected]>
Acked-by: Máté Eckl <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/netfilter_bridge.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
index 156ccd089df1..1610fdbab98d 100644
--- a/include/uapi/linux/netfilter_bridge.h
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -11,6 +11,10 @@
#include <linux/if_vlan.h>
#include <linux/if_pppox.h>
+#ifndef __KERNEL__
+#include <limits.h> /* for INT_MIN, INT_MAX */
+#endif
+
/* Bridge Hooks */
/* After promisc drops, checksum checks. */
#define NF_BR_PRE_ROUTING 0
--
2.17.1
On Wed, 2018-11-14 at 17:21 -0500, Sasha Levin wrote:
> From: Leonard Crestez <[email protected]>
>
> [ Upstream commit 1ad9fb750a104f51851c092edd7b3553f0218428 ]
>
> Bindings for "fixed-regulator" only explicitly support "gpio" property,
> not "gpios". Fix by correcting the property name.
>
> The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
> cycle, this can be handled by the phy-reset-gpios property. Sadly this
> is not handled on suspend: the fec driver turns phy-supply off but
> doesn't assert phy-reset-gpios again on resume.
>
> Since additional phy-level work is required to support powering off the
> phy in suspend fix the problem by just marking the regulator as
> "boot-on" "always-on" so that it's never turned off. This behavior is
> equivalent to older releases.
>
> Keep the phy-reset-gpios property on fec anyway because it is a correct
> description of board design.
>
> This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
> Convert to use GPIO descriptor only") which causes the "gpios" property
> to also be parsed. Before that commit the "gpios" property had no
> effect, PHY reset was only handled in the the bootloader.
>
> Signed-off-by: Leonard Crestez <[email protected]>
> Signed-off-by: Shawn Guo <[email protected]>
This is something of a workaround for gpio core changes in 4.20 and
there is no need for it in older releases.
I don't think you should backport this.
--
Regards,
Leonard
On Thu, Nov 15, 2018 at 10:39:44AM +0000, Leonard Crestez wrote:
>On Wed, 2018-11-14 at 17:21 -0500, Sasha Levin wrote:
>> From: Leonard Crestez <[email protected]>
>>
>> [ Upstream commit 1ad9fb750a104f51851c092edd7b3553f0218428 ]
>>
>> Bindings for "fixed-regulator" only explicitly support "gpio" property,
>> not "gpios". Fix by correcting the property name.
>>
>> The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
>> cycle, this can be handled by the phy-reset-gpios property. Sadly this
>> is not handled on suspend: the fec driver turns phy-supply off but
>> doesn't assert phy-reset-gpios again on resume.
>>
>> Since additional phy-level work is required to support powering off the
>> phy in suspend fix the problem by just marking the regulator as
>> "boot-on" "always-on" so that it's never turned off. This behavior is
>> equivalent to older releases.
>>
>> Keep the phy-reset-gpios property on fec anyway because it is a correct
>> description of board design.
>>
>> This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
>> Convert to use GPIO descriptor only") which causes the "gpios" property
>> to also be parsed. Before that commit the "gpios" property had no
>> effect, PHY reset was only handled in the the bootloader.
>>
>> Signed-off-by: Leonard Crestez <[email protected]>
>> Signed-off-by: Shawn Guo <[email protected]>
>
>This is something of a workaround for gpio core changes in 4.20 and
>there is no need for it in older releases.
>
>I don't think you should backport this.
Dropped, thank you.
Thanks,
Sasha
On Wed, 14 Nov 2018 17:21:07 -0500
Sasha Levin <[email protected]> wrote:
> From: Martin Schwidefsky <[email protected]>
>
> [ Upstream commit e12e4044aede97974f2222eb7f0ed726a5179a32 ]
>
> In case a fork or a clone system fails in copy_process and the error
> handling does the mmput() at the bad_fork_cleanup_mm label, the
> following warning messages will appear on the console:
>
> BUG: non-zero pgtables_bytes on freeing mm: 16384
>
> The reason for that is the tricks we play with mm_inc_nr_puds() and
> mm_inc_nr_pmds() in init_new_context().
>
> A normal 64-bit process has 3 levels of page table, the p4d level and
> the pud level are folded. On process termination the free_pud_range()
> function in mm/memory.c will subtract 16KB from pgtable_bytes with a
> mm_dec_nr_puds() call, but there actually is not really a pud table.
>
> One issue with this is the fact that pgtable_bytes is usually off
> by a few kilobytes, but the more severe problem is that for a failed
> fork or clone the free_pgtables() function is not called. In this case
> there is no mm_dec_nr_puds() or mm_dec_nr_pmds() that go together with
> the mm_inc_nr_puds() and mm_inc_nr_pmds in init_new_context().
> The pgtable_bytes will be off by 16384 or 32768 bytes and we get the
> BUG message. The message itself is purely cosmetic, but annoying.
>
> To fix this override the mm_pmd_folded, mm_pud_folded and mm_p4d_folded
> function to check for the true size of the address space.
>
> Reported-by: Li Wang <[email protected]>
> Tested-by: Li Wang <[email protected]>
> Signed-off-by: Martin Schwidefsky <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
The fix for the page table accounting problem initially had four git commits:
a8874e7e8a "mm: make the __PAGETABLE_PxD_FOLDED defines non-empty"
1071fc5779 "mm: introduce mm_[p4d|pud|pmd]_folded"
6d212db119 "mm: add mm_pxd_folded checks to pgtable_bytes accounting functions"
e12e4044ae "s390/mm: fix mis-accounting of pgtable_bytes"
In the meantime a fifth git commit is needed to really fix it:
814cedbc0b "s390/mm: correct pgtable_bytes on page table downgrade"
The autoselect mechanism only pick up one of the initial four patches.
Not good. May I ask *WHY* this patch was picked out of the blue?
Same for 4.18-stable.
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.