Hi all,
currently every architecture that wants to provide on of the common
periphal busses needs to add some boilerplate code and include the
right Kconfig files. This series instead just selects the presence
(when needed) and then handles everything in the bus-specific
Kconfig file under drivers/.
Changes since v3:
- drop the patches already merged
- fix a typo in the PCI help text
- split the always enable PCI on alpha change into a separate patch
- remove the mips HT_PCI symbol
- add a new FORCE_PCI symbol to easily allow selecting PCI support
- new patch to consolidate PCI_DOMAINS
- new patch to consolidate PCI_SYSCALL
Changes since v2:
- depend on HAVE_PCI for PCIe endpoint code
- fix some commit message typos
- remove CONFIG_PCI from xtensa iss defconfig
- drop EISA support from arm
- clean up EISA selection for alpha
Changes since v1:
- rename all HAS_* Kconfig symbols to HAVE_*
- drop the CONFIG_PCI_QSPAN option entirely
- drop duplicate select from powerpc
- restore missing selection of PCI_MSI for riscv
- update x86 and riscv defconfigs to include PCI
- actually inclue drivers/eisa/Kconfig
- adjust some captilizations
Without PCI support the kernel won't even compile, so force it on.
Signed-off-by: Christoph Hellwig <[email protected]>
---
arch/alpha/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5b4f88363453..65f6d0bf69d4 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -6,6 +6,7 @@ config ALPHA
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_NO_PREEMPT
select ARCH_USE_CMPXCHG_LOCKREF
+ select PCI if !ALPHA_JENSEN
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
--
2.19.1
Let architectures opt into EISA support by selecting HAS_EISA and
handle everything else in drivers/eisa.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/alpha/Kconfig | 15 ++++++++-------
arch/mips/Kconfig | 31 +++++--------------------------
arch/powerpc/Kconfig | 3 ---
arch/x86/Kconfig | 19 +------------------
drivers/Kconfig | 1 +
drivers/eisa/Kconfig | 21 ++++++++++++++++++++-
drivers/parisc/Kconfig | 11 +----------
7 files changed, 36 insertions(+), 65 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 0ff180ab2a42..5e7a44e6110f 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -129,11 +129,13 @@ choice
config ALPHA_GENERIC
bool "Generic"
depends on TTY
+ select HAVE_EISA
help
A generic kernel will run on all supported Alpha hardware.
config ALPHA_ALCOR
bool "Alcor/Alpha-XLT"
+ select HAVE_EISA
help
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
@@ -207,6 +209,7 @@ config ALPHA_JENSEN
bool "Jensen"
depends on BROKEN
select DMA_DIRECT_OPS
+ select HAVE_EISA
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
@@ -223,6 +226,7 @@ config ALPHA_LX164
config ALPHA_LYNX
bool "Lynx"
+ select HAVE_EISA
help
AlphaServer 2100A-based systems.
@@ -233,6 +237,7 @@ config ALPHA_MARVEL
config ALPHA_MIATA
bool "Miata"
+ select HAVE_EISA
help
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
or 600au).
@@ -252,6 +257,7 @@ config ALPHA_NONAME_CH
config ALPHA_NORITAKE
bool "Noritake"
+ select HAVE_EISA
help
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
systems.
@@ -264,6 +270,7 @@ config ALPHA_P2K
config ALPHA_RAWHIDE
bool "Rawhide"
+ select HAVE_EISA
help
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
See HOWTO at
@@ -283,6 +290,7 @@ config ALPHA_SX164
config ALPHA_SABLE
bool "Sable"
+ select HAVE_EISA
help
Digital AlphaServer 2000 and 2100-based systems.
@@ -512,11 +520,6 @@ config ALPHA_SRM
If unsure, say N.
-config EISA
- bool
- depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
- default y
-
config ARCH_MAY_HAVE_PC_FDC
def_bool y
@@ -667,8 +670,6 @@ config HZ
default 1200 if HZ_1200
default 1024
-source "drivers/eisa/Kconfig"
-
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 67fbd4952ff4..f4df8007fddb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_ISA_DMA if EISA
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
@@ -71,6 +72,7 @@ config MIPS
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
select IRQ_FORCED_THREADING
+ select ISA if EISA
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
select PERF_USE_VMALLOC
@@ -632,7 +634,7 @@ config SGI_IP22
select CSRC_R4K
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
- select HW_HAS_EISA
+ select HAVE_EISA
select I8253
select I8259
select IP22_CPU_SCACHE
@@ -697,7 +699,7 @@ config SGI_IP28
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select IRQ_MIPS_CPU
- select HW_HAS_EISA
+ select HAVE_EISA
select I8253
select I8259
select SGI_HAS_I8042
@@ -840,8 +842,8 @@ config SNI_RM
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
+ select HAVE_EISA
select HAVE_PCSPKR_PLATFORM
- select HW_HAS_EISA
select HAVE_PCI
select IRQ_MIPS_CPU
select I8253
@@ -3024,9 +3026,6 @@ config MIPS_AUTO_PFN_OFFSET
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
-config HW_HAS_EISA
- bool
-
config PCI_DRIVERS_GENERIC
select PCI_DOMAINS_GENERIC if PCI
bool
@@ -3044,26 +3043,6 @@ config PCI_DRIVERS_LEGACY
config ISA
bool
-config EISA
- bool "EISA support"
- depends on HW_HAS_EISA
- select ISA
- select GENERIC_ISA_DMA
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
config TC
bool "TURBOchannel support"
depends on MACH_DECSTATION
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index f2f70cc2bd44..4dadf83d9d5c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -886,9 +886,6 @@ config PPC_INDIRECT_PCI
depends on PCI
default y if 40x || 44x
-config EISA
- bool
-
config SBUS
bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c8052a7c3f9..305dcb6498cc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -147,6 +147,7 @@ config X86
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_EBPF_JIT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select HAVE_EISA
select HAVE_EXIT_THREAD
select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
@@ -2682,24 +2683,6 @@ config ISA
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
-config EISA
- bool "EISA support"
- depends on ISA
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
config SCx200
tristate "NatSemi SCx200 support"
---help---
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 065d308fcb00..ea58a6b99288 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -4,6 +4,7 @@ menu "Device Drivers"
# Keep I/O buses first
source "drivers/amba/Kconfig"
+source "drivers/eisa/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/rapidio/Kconfig"
diff --git a/drivers/eisa/Kconfig b/drivers/eisa/Kconfig
index 2705284f6223..4570e3bca42c 100644
--- a/drivers/eisa/Kconfig
+++ b/drivers/eisa/Kconfig
@@ -1,6 +1,26 @@
#
# EISA configuration
#
+
+config HAVE_EISA
+ bool
+
+menuconfig EISA
+ bool "EISA support"
+ depends on HAVE_EISA
+ ---help---
+ The Extended Industry Standard Architecture (EISA) bus was
+ developed as an open alternative to the IBM MicroChannel bus.
+
+ The EISA bus provided some of the features of the IBM MicroChannel
+ bus while maintaining backward compatibility with cards made for
+ the older ISA bus. The EISA bus saw limited use between 1988 and
+ 1995 when it was made obsolete by the PCI bus.
+
+ Say Y here if you are building a kernel for an EISA-based machine.
+
+ Otherwise, say N.
+
config EISA_VLB_PRIMING
bool "Vesa Local Bus priming"
depends on X86 && EISA
@@ -53,4 +73,3 @@ config EISA_NAMES
names.
When in doubt, say Y.
-
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 1a55763d1245..74e119adca01 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -2,6 +2,7 @@ menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
config GSC
bool "VSC/GSC/HSC bus support"
+ select HAVE_EISA
default y
help
The VSC, GSC and HSC busses were used from the earliest 700-series
@@ -46,16 +47,6 @@ config GSC_WAX
used), a HIL interface chip and is also known to be used as the
GSC bridge for an X.25 GSC card.
-config EISA
- bool "EISA support"
- depends on GSC
- help
- Say Y here if you have an EISA bus in your machine. This code
- supports both the Mongoose & Wax EISA adapters. It is sadly
- incomplete and lacks support for card-to-host DMA.
-
-source "drivers/eisa/Kconfig"
-
config ISA
bool "ISA support"
depends on EISA
--
2.19.1
There is no good reason to duplicate the RAPIDIO menu in various
architectures. Instead provide a selectable HAVE_RAPIDIO symbol
that indicates native availability of RAPIDIO support and the handle
the rest in drivers/pci. This also means we now provide support
for PCI(e) to Rapidio bridges for every architecture instead of a
limited subset.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/mips/Kconfig | 15 +--------------
arch/powerpc/Kconfig | 14 +-------------
arch/powerpc/platforms/85xx/Kconfig | 8 ++++----
arch/powerpc/platforms/86xx/Kconfig | 4 ++--
arch/x86/Kconfig | 9 ---------
drivers/Kconfig | 1 +
drivers/rapidio/Kconfig | 11 +++++++++++
7 files changed, 20 insertions(+), 42 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3912250ff813..67fbd4952ff4 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -892,7 +892,7 @@ config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
select ARCH_HAS_PHYS_TO_DMA
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -3107,19 +3107,6 @@ config ZONE_DMA
config ZONE_DMA32
bool
-config HAS_RAPIDIO
- bool
- default n
-
-config RAPIDIO
- tristate "RapidIO support"
- depends on HAS_RAPIDIO || PCI
- help
- If you say Y here, the kernel will include drivers and
- infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
endmenu
config TRAD_SIGNALS
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cc8435d87949..f2f70cc2bd44 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -939,26 +939,14 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y
-config HAS_RAPIDIO
- bool
-
-config RAPIDIO
- tristate "RapidIO support"
- depends on HAS_RAPIDIO || PCI
- help
- If you say Y here, the kernel will include drivers and
- infrastructure code to support RapidIO interconnect devices.
-
config FSL_RIO
bool "Freescale Embedded SRIO Controller support"
- depends on RAPIDIO = y && HAS_RAPIDIO
+ depends on RAPIDIO = y && HAVE_RAPIDIO
default "n"
---help---
Include support for RapidIO controller on Freescale embedded
processors (MPC8548, MPC8641, etc).
-source "drivers/rapidio/Kconfig"
-
endmenu
config NONSTATIC_KERNEL
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index ba0ea84ce578..d1af0ee2f8c8 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -66,7 +66,7 @@ config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
help
This option enables support for the MPC85xx CDS board
@@ -74,7 +74,7 @@ config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select PHYLIB if NETDEVICES
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC85xx MDS board
@@ -219,7 +219,7 @@ config PPA8548
help
This option enables support for the Prodrive PPA8548 board.
select DEFAULT_UIMAGE
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
@@ -277,7 +277,7 @@ config CORENET_GENERIC
select SWIOTLB
select GPIOLIB
select GPIO_MPC8XXX
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the FSL CoreNet based boards.
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index a4fa31a40502..413837a63242 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -15,7 +15,7 @@ config MPC8641_HPCN
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575 if PCI
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC8641 HPCN board.
@@ -57,7 +57,7 @@ config GEF_SBC610
select MMIO_NVRAM
select GPIOLIB
select GE_FPGA
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
help
This option enables support for the GE SBC610.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 659d59d7f033..4c8052a7c3f9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2811,15 +2811,6 @@ config AMD_NB
def_bool y
depends on CPU_SUP_AMD && PCI
-config RAPIDIO
- tristate "RapidIO support"
- depends on PCI
- help
- If enabled this option will include drivers and the core
- infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
config X86_SYSFB
bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
help
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 58ee88c36cf5..065d308fcb00 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -6,6 +6,7 @@ menu "Device Drivers"
source "drivers/amba/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
+source "drivers/rapidio/Kconfig"
source "drivers/base/Kconfig"
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index d6d2f20c4597..e3d8fe41b50c 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,6 +1,17 @@
#
# RapidIO configuration
#
+
+config HAVE_RAPIDIO
+ bool
+
+menuconfig RAPIDIO
+ tristate "RapidIO support"
+ depends on HAVE_RAPIDIO || PCI
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
source "drivers/rapidio/devices/Kconfig"
config RAPIDIO_DISC_TIMEOUT
--
2.19.1
There is nothing architecture specific in the PCMCIA core, so allow
building it everywhere. The actual host controllers will depend on ISA,
PCI or a specific SOC.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Dominik Brodowski <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/alpha/Kconfig | 2 --
arch/arm/Kconfig | 2 --
arch/ia64/Kconfig | 10 ----------
arch/m68k/Kconfig.bus | 2 --
arch/mips/Kconfig | 2 --
arch/powerpc/Kconfig | 2 --
arch/sh/Kconfig | 2 --
arch/sparc/Kconfig | 2 --
arch/unicore32/Kconfig | 6 ------
arch/x86/Kconfig | 2 --
arch/xtensa/Kconfig | 2 --
drivers/Kconfig | 1 +
drivers/parisc/Kconfig | 2 --
drivers/pcmcia/Kconfig | 1 +
14 files changed, 2 insertions(+), 36 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 1f679508bc34..0ff180ab2a42 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -669,8 +669,6 @@ config HZ
source "drivers/eisa/Kconfig"
-source "drivers/pcmcia/Kconfig"
-
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73d0f5e9feb7..7b1dfaec030e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1225,8 +1225,6 @@ config PCI_HOST_ITE8152
default y
select DMABOUNCE
-source "drivers/pcmcia/Kconfig"
-
endmenu
menu "Kernel Features"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8f18d90c933d..887e7bfd7055 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -542,16 +542,6 @@ endif
endmenu
-if !IA64_HP_SIM
-
-menu "Bus options (PCI, PCMCIA)"
-
-source "drivers/pcmcia/Kconfig"
-
-endmenu
-
-endif
-
source "arch/ia64/hp/sim/Kconfig"
config MSPEC
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 8cb0604b195b..9d0a3a23d50e 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -68,6 +68,4 @@ if !MMU
config ISA_DMA_API
def_bool !M5272
-source "drivers/pcmcia/Kconfig"
-
endif
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 151a4aaf0610..3912250ff813 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3107,8 +3107,6 @@ config ZONE_DMA
config ZONE_DMA32
bool
-source "drivers/pcmcia/Kconfig"
-
config HAS_RAPIDIO
bool
default n
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cbdcd1c0b1e0..cc8435d87949 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -939,8 +939,6 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y
-source "drivers/pcmcia/Kconfig"
-
config HAS_RAPIDIO
bool
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8a3c292ae906..44a45a37a3c4 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -855,8 +855,6 @@ config MAPLE
Dreamcast with a serial line terminal or a remote network
connection.
-source "drivers/pcmcia/Kconfig"
-
endmenu
menu "Power management options (EXPERIMENTAL)"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 20417b8b12a5..daee2c73b6c5 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -503,8 +503,6 @@ config SPARC_GRPCI2
help
Say Y here to include the GRPCI2 Host Bridge Driver.
-source "drivers/pcmcia/Kconfig"
-
config SUN_OPENPROMFS
tristate "Openprom tree appears in /proc/openprom"
help
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 4658859c6aee..96ac6cc6ab2a 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -117,12 +117,6 @@ config UNICORE_FPU_F64
endmenu
-menu "Bus support"
-
-source "drivers/pcmcia/Kconfig"
-
-endmenu
-
menu "Kernel Features"
source "kernel/Kconfig.hz"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 953db09165c2..659d59d7f033 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2811,8 +2811,6 @@ config AMD_NB
def_bool y
depends on CPU_SUP_AMD && PCI
-source "drivers/pcmcia/Kconfig"
-
config RAPIDIO
tristate "RapidIO support"
depends on PCI
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 2865a556163a..322b7391de89 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -512,8 +512,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
-source "drivers/pcmcia/Kconfig"
-
config PLATFORM_WANT_DEFAULT_MEM
def_bool n
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 059573823387..58ee88c36cf5 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -5,6 +5,7 @@ menu "Device Drivers"
source "drivers/amba/Kconfig"
source "drivers/pci/Kconfig"
+source "drivers/pcmcia/Kconfig"
source "drivers/base/Kconfig"
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 5bbfea1a019c..1a55763d1245 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -92,8 +92,6 @@ config IOMMU_SBA
depends on PCI_LBA
default PCI_LBA
-source "drivers/pcmcia/Kconfig"
-
endmenu
menu "PA-RISC specific drivers"
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index cbbe4a285b48..c9bdbb463a7e 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -4,6 +4,7 @@
menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
+ depends on !UML
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
--
2.19.1
Let architectures select the syscall support instead of duplicating the
kconfig entry.
Signed-off-by: Christoph Hellwig <[email protected]>
---
arch/alpha/Kconfig | 4 +---
arch/arc/Kconfig | 4 +---
arch/arm/Kconfig | 4 +---
arch/arm64/Kconfig | 4 +---
arch/ia64/Kconfig | 4 +---
arch/microblaze/Kconfig | 4 +---
arch/powerpc/Kconfig | 4 +---
arch/sparc/Kconfig | 4 +---
drivers/pci/Kconfig | 3 +++
9 files changed, 11 insertions(+), 24 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 2bf98e581684..1f679508bc34 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -8,6 +8,7 @@ config ALPHA
select ARCH_USE_CMPXCHG_LOCKREF
select FORCE_PCI if !ALPHA_JENSEN
select PCI_DOMAINS if PCI
+ select PCI_SYSCALL if PCI
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
@@ -322,9 +323,6 @@ config ISA_DMA_API
bool
default y
-config PCI_SYSCALL
- def_bool PCI
-
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 5d2dde4b04cd..54d618960a14 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -46,6 +46,7 @@ config ARC
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
+ select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
config ARCH_HAS_CACHE_LINE_SIZE
@@ -550,7 +551,4 @@ config FORCE_MAX_ZONEORDER
default "12" if ARC_HUGEPAGE_16M
default "11"
-config PCI_SYSCALL
- def_bool PCI
-
source "kernel/power/Kconfig"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5eab9f943723..73d0f5e9feb7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -103,6 +103,7 @@ config ARM
select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
+ select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC
select REFCOUNT_FULL
select RTC_LIB
@@ -1218,9 +1219,6 @@ config PCI_NANOENGINE
help
Enable PCI on the BSE nanoEngine board.
-config PCI_SYSCALL
- def_bool PCI
-
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0eba26143350..8db186f8442b 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -166,6 +166,7 @@ config ARM64
select OF_RESERVED_MEM
select PCI_DOMAINS_GENERIC if PCI
select PCI_ECAM if ACPI
+ select PCI_SYSCALL if PCI
select POWER_RESET
select POWER_SUPPLY
select REFCOUNT_FULL
@@ -289,9 +290,6 @@ config ARCH_PROC_KCORE_TEXT
source "arch/arm64/Kconfig.platforms"
-config PCI_SYSCALL
- def_bool PCI
-
menu "Kernel Features"
menu "ARM errata workarounds via the alternatives framework"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 7cf4b8bd779f..8f18d90c933d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -16,6 +16,7 @@ config IA64
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select FORCE_PCI if (!IA64_HP_SIM)
select PCI_DOMAINS if PCI
+ select PCI_SYSCALL if PCI
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_EXIT_THREAD
select HAVE_IDE
@@ -545,9 +546,6 @@ if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
-config PCI_SYSCALL
- def_bool PCI
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 551252d5c561..b3012bb4e2b2 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -37,6 +37,7 @@ config MICROBLAZE
select OF
select OF_EARLY_FLATTREE
select PCI_DOMAINS_GENERIC if PCI
+ select PCI_SYSCALL if PCI
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
@@ -268,9 +269,6 @@ endmenu
menu "Bus Options"
-config PCI_SYSCALL
- def_bool PCI
-
config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index edd3686eec28..cbdcd1c0b1e0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -237,6 +237,7 @@ config PPC
select OLD_SIGACTION if PPC32
select OLD_SIGSUSPEND
select PCI_DOMAINS if PCI
+ select PCI_SYSCALL if PCI
select RTC_LIB
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
@@ -932,9 +933,6 @@ config FSL_GTM
help
Freescale General-purpose Timers support
-config PCI_SYSCALL
- def_bool PCI
-
config PCI_8260
bool
depends on PCI && 8260
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d2b760b4d2d2..20417b8b12a5 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -39,6 +39,7 @@ config SPARC
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
+ select PCI_SYSCALL if PCI
select ODD_RT_SIGACTION
select OLD_SIGSUSPEND
select ARCH_HAS_SG_CHAIN
@@ -474,9 +475,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
-config PCI_SYSCALL
- def_bool PCI
-
config PCIC_PCI
bool
depends on PCI && SPARC32 && !SPARC_LEON
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 95812fc4958c..904847d173de 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -30,6 +30,9 @@ config PCI_DOMAINS_GENERIC
select PCI_DOMAINS
bool
+config PCI_SYSCALL
+ bool
+
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
--
2.19.1
Move the definitions to drivers/pci and let the architectures select
them. Two small differences to before: PCI_DOMAINS_GENERIC now selects
PCI_DOMAINS, cutting down the churn for modern architectures. As the
only architectured arm did previously also offer PCI_DOMAINS as a user
visible choice in addition to selecting it from the relevant configs,
this is gone now.
Signed-off-by: Christoph Hellwig <[email protected]>
---
arch/alpha/Kconfig | 5 +----
arch/arm/Kconfig | 15 +--------------
arch/arm/mach-bcm/Kconfig | 2 +-
arch/arm/mach-socfpga/Kconfig | 2 +-
arch/arm64/Kconfig | 7 +------
arch/ia64/Kconfig | 4 +---
arch/microblaze/Kconfig | 7 +------
arch/mips/Kconfig | 10 ++--------
arch/powerpc/Kconfig | 4 +---
arch/riscv/Kconfig | 7 +------
arch/s390/Kconfig | 4 +---
arch/sh/Kconfig | 3 ---
arch/sparc/Kconfig | 4 +---
arch/x86/Kconfig | 5 +----
drivers/pci/Kconfig | 9 +++++++++
15 files changed, 23 insertions(+), 65 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index ef6ea8171994..2bf98e581684 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -7,6 +7,7 @@ config ALPHA
select ARCH_NO_PREEMPT
select ARCH_USE_CMPXCHG_LOCKREF
select FORCE_PCI if !ALPHA_JENSEN
+ select PCI_DOMAINS if PCI
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
@@ -321,10 +322,6 @@ config ISA_DMA_API
bool
default y
-config PCI_DOMAINS
- bool
- default y
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eb82c5cb0ad5..5eab9f943723 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -316,7 +316,7 @@ config ARCH_MULTIPLATFORM
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PCI
- select PCI_DOMAINS if PCI
+ select PCI_DOMAINS_GENERIC if PCI
select SPARSE_IRQ
select USE_OF
@@ -1212,19 +1212,6 @@ config ISA_DMA
config ISA_DMA_API
bool
-config PCI_DOMAINS
- bool "Support for multiple PCI domains"
- depends on PCI
- help
- Enable PCI domains kernel management. Say Y if your machine
- has a PCI bus hierarchy that requires more than one PCI
- domain (aka segment) to be correctly managed. Say N otherwise.
-
- If you don't know what to do here, say N.
-
-config PCI_DOMAINS_GENERIC
- def_bool PCI_DOMAINS
-
config PCI_NANOENGINE
bool "BSE nanoEngine PCI support"
depends on SA1100_NANOENGINE
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 25aac6ee2ab1..a3f375af673d 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -20,7 +20,7 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
- select PCI_DOMAINS if PCI
+ select PCI_DOMAINS_GENERIC if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 4adb901dd5eb..d43798defdba 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -10,7 +10,7 @@ menuconfig ARCH_SOCFPGA
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
- select PCI_DOMAINS if PCI
+ select PCI_DOMAINS_GENERIC if PCI
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index feffc52c823f..0eba26143350 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -164,6 +164,7 @@ config ARM64
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
+ select PCI_DOMAINS_GENERIC if PCI
select PCI_ECAM if ACPI
select POWER_RESET
select POWER_SUPPLY
@@ -288,12 +289,6 @@ config ARCH_PROC_KCORE_TEXT
source "arch/arm64/Kconfig.platforms"
-config PCI_DOMAINS
- def_bool PCI
-
-config PCI_DOMAINS_GENERIC
- def_bool PCI
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 4dec7457feed..7cf4b8bd779f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -15,6 +15,7 @@ config IA64
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select FORCE_PCI if (!IA64_HP_SIM)
+ select PCI_DOMAINS if PCI
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_EXIT_THREAD
select HAVE_IDE
@@ -544,9 +545,6 @@ if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
-config PCI_DOMAINS
- def_bool PCI
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cee1fc849d97..551252d5c561 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -36,6 +36,7 @@ config MICROBLAZE
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
+ select PCI_DOMAINS_GENERIC if PCI
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
@@ -267,12 +268,6 @@ endmenu
menu "Bus Options"
-config PCI_DOMAINS
- def_bool PCI
-
-config PCI_DOMAINS_GENERIC
- def_bool PCI_DOMAINS
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 01be35aeffad..151a4aaf0610 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -73,7 +73,6 @@ config MIPS
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
- select PCI_DOMAINS if PCI
select PERF_USE_VMALLOC
select RTC_LIB
select SYSCTL_EXCEPTION_TRACE
@@ -3028,19 +3027,14 @@ menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
bool
-config PCI_DOMAINS
- bool
-
-config PCI_DOMAINS_GENERIC
- bool
-
config PCI_DRIVERS_GENERIC
- select PCI_DOMAINS_GENERIC if PCI_DOMAINS
+ select PCI_DOMAINS_GENERIC if PCI
bool
config PCI_DRIVERS_LEGACY
def_bool !PCI_DRIVERS_GENERIC
select NO_GENERIC_PCI_IOPORT_MAP
+ select PCI_DOMAINS if PCI
#
# ISA support is now enabled via select. Too many systems still have the one
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8eba699e8ea3..edd3686eec28 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -236,6 +236,7 @@ config PPC
select OF_RESERVED_MEM
select OLD_SIGACTION if PPC32
select OLD_SIGSUSPEND
+ select PCI_DOMAINS if PCI
select RTC_LIB
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
@@ -931,9 +932,6 @@ config FSL_GTM
help
Freescale General-purpose Timers support
-config PCI_DOMAINS
- def_bool PCI
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index f17a39fe9408..5c659165b618 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -41,6 +41,7 @@ config RISCV
select HAVE_PCI
select MODULES_USE_ELF_RELA if MODULES
select THREAD_INFO_IN_TASK
+ select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_TIMER
select GENERIC_IRQ_MULTI_HANDLER
@@ -265,12 +266,6 @@ config CMDLINE_FORCE
endmenu
-config PCI_DOMAINS
- def_bool PCI
-
-config PCI_DOMAINS_GENERIC
- def_bool PCI
-
menu "Power management options"
source kernel/power/Kconfig
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9f05625d75b9..22a0c364b31d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -181,6 +181,7 @@ config S390
select NEED_SG_DMA_LENGTH if PCI
select OLD_SIGACTION
select OLD_SIGSUSPEND3
+ select PCI_DOMAINS if PCI
select PCI_MSI if PCI
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
@@ -724,9 +725,6 @@ config PCI_NR_FUNCTIONS
endif # PCI
-config PCI_DOMAINS
- def_bool PCI
-
config HAS_IOMEM
def_bool PCI
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 479566c76562..8a3c292ae906 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -855,9 +855,6 @@ config MAPLE
Dreamcast with a serial line terminal or a remote network
connection.
-config PCI_DOMAINS
- bool
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 5a4d5264822b..d2b760b4d2d2 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -90,6 +90,7 @@ config SPARC64
select GENERIC_TIME_VSYSCALL
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_PTE_SPECIAL
+ select PCI_DOMAINS if PCI
config ARCH_DEFCONFIG
string
@@ -473,9 +474,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
-config PCI_DOMAINS
- def_bool PCI if SPARC64
-
config PCI_SYSCALL
def_bool PCI
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a8da60284822..953db09165c2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -197,6 +197,7 @@ config X86
select HOTPLUG_SMT if SMP
select IRQ_FORCED_THREADING
select NEED_SG_DMA_LENGTH
+ select PCI_DOMAINS if PCI
select PCI_LOCKLESS_CONFIG
select PERF_EVENTS
select RTC_LIB
@@ -2634,10 +2635,6 @@ config PCI_XEN
depends on PCI && XEN
select SWIOTLB_XEN
-config PCI_DOMAINS
- def_bool y
- depends on PCI
-
config MMCONF_FAM10H
def_bool y
depends on X86_64 && PCI_MMCONFIG && ACPI
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index a8128a1946a2..95812fc4958c 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,6 +21,15 @@ menuconfig PCI
support for PCI-X and the foundations for PCI Express support.
Say 'Y' here unless you know what you are doing.
+config PCI_DOMAINS
+ depends on PCI
+ bool
+
+config PCI_DOMAINS_GENERIC
+ depends on PCI
+ select PCI_DOMAINS
+ bool
+
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
--
2.19.1
No arm config enables EISA, and arm does not include drivers/eisa/Kconfig
which provides support for things like PCI to EISA bridges, so it is most
likely dead.
Suggested-by: Masahiro Yamada <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
---
arch/arm/Kconfig | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 91be74d8df65..f24a7435d19a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -163,21 +163,6 @@ config HAVE_PROC_CPU
config NO_IOPORT_MAP
bool
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
config SBUS
bool
--
2.19.1
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
---
arch/alpha/Kconfig | 15 +-------
arch/arc/Kconfig | 20 ----------
arch/arc/plat-axs10x/Kconfig | 2 +-
arch/arc/plat-hsdk/Kconfig | 2 +-
arch/arm/Kconfig | 25 +++---------
arch/arm/mach-alpine/Kconfig | 2 +-
arch/arm/mach-footbridge/Kconfig | 8 ++--
arch/arm/mach-ixp4xx/Kconfig | 22 +++++------
arch/arm/mach-ks8695/Kconfig | 10 ++---
arch/arm/mach-mv78xx0/Kconfig | 2 +-
arch/arm/mach-mvebu/Kconfig | 2 +-
arch/arm/mach-orion5x/Kconfig | 2 +-
arch/arm/mach-pxa/Kconfig | 2 +-
arch/arm/mach-sa1100/Kconfig | 2 +-
arch/arm64/Kconfig | 14 +------
arch/hexagon/Kconfig | 3 --
arch/ia64/Kconfig | 10 +----
arch/m68k/Kconfig.bus | 11 ------
arch/m68k/Kconfig.cpu | 1 +
arch/microblaze/Kconfig | 6 +--
arch/mips/Kconfig | 44 ++++++++--------------
arch/mips/alchemy/Kconfig | 6 +--
arch/mips/ath25/Kconfig | 3 +-
arch/mips/ath79/Kconfig | 8 ++--
arch/mips/bcm63xx/Kconfig | 14 +++----
arch/mips/lantiq/Kconfig | 2 +-
arch/mips/loongson64/Kconfig | 7 ++--
arch/mips/pmcs-msp71xx/Kconfig | 10 ++---
arch/mips/ralink/Kconfig | 8 ++--
arch/mips/sibyte/Kconfig | 10 ++---
arch/mips/txx9/Kconfig | 8 ++--
arch/mips/vr41xx/Kconfig | 8 ++--
arch/parisc/Kconfig | 1 +
arch/powerpc/Kconfig | 20 +---------
arch/powerpc/platforms/40x/Kconfig | 10 ++---
arch/powerpc/platforms/44x/Kconfig | 32 ++++++++--------
arch/powerpc/platforms/512x/Kconfig | 2 +-
arch/powerpc/platforms/52xx/Kconfig | 2 +-
arch/powerpc/platforms/83xx/Kconfig | 2 +-
arch/powerpc/platforms/85xx/Kconfig | 2 +-
arch/powerpc/platforms/86xx/Kconfig | 4 +-
arch/powerpc/platforms/Kconfig | 2 +-
arch/powerpc/platforms/Kconfig.cputype | 4 +-
arch/powerpc/platforms/amigaone/Kconfig | 2 +-
arch/powerpc/platforms/cell/Kconfig | 2 +-
arch/powerpc/platforms/chrp/Kconfig | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 4 +-
arch/powerpc/platforms/maple/Kconfig | 2 +-
arch/powerpc/platforms/pasemi/Kconfig | 2 +-
arch/powerpc/platforms/powermac/Kconfig | 2 +-
arch/powerpc/platforms/powernv/Kconfig | 2 +-
arch/powerpc/platforms/ps3/Kconfig | 2 +-
arch/powerpc/platforms/pseries/Kconfig | 2 +-
arch/riscv/Kconfig | 18 +--------
arch/s390/Kconfig | 19 +++-------
arch/sh/Kconfig | 19 ++--------
arch/sh/boards/Kconfig | 30 +++++++--------
arch/sparc/Kconfig | 15 +-------
arch/um/Kconfig | 3 --
arch/unicore32/Kconfig | 11 +-----
arch/x86/Kconfig | 12 +-----
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
arch/xtensa/Kconfig | 16 +-------
arch/xtensa/configs/common_defconfig | 1 +
arch/xtensa/configs/iss_defconfig | 1 -
drivers/Kconfig | 4 ++
drivers/parisc/Kconfig | 11 ------
drivers/pci/Kconfig | 18 +++++++++
drivers/pci/endpoint/Kconfig | 2 +-
70 files changed, 195 insertions(+), 379 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 65f6d0bf69d4..ef6ea8171994 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -6,7 +6,7 @@ config ALPHA
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_NO_PREEMPT
select ARCH_USE_CMPXCHG_LOCKREF
- select PCI if !ALPHA_JENSEN
+ select FORCE_PCI if !ALPHA_JENSEN
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
@@ -16,6 +16,7 @@ config ALPHA
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
+ select GENERIC_PCI_IOMAP if PCI
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
@@ -320,17 +321,6 @@ config ISA_DMA_API
bool
default y
-config PCI
- bool
- depends on !ALPHA_JENSEN
- select GENERIC_PCI_IOMAP
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool
default y
@@ -682,7 +672,6 @@ config HZ
default 1200 if HZ_1200
default 1024
-source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index c9e2a1323536..5d2dde4b04cd 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -51,9 +51,6 @@ config ARC
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
-config MIGHT_HAVE_PCI
- bool
-
config TRACE_IRQFLAGS_SUPPORT
def_bool y
@@ -553,24 +550,7 @@ config FORCE_MAX_ZONEORDER
default "12" if ARC_HUGEPAGE_16M
default "11"
-menu "Bus Support"
-
-config PCI
- bool "PCI support" if MIGHT_HAVE_PCI
- help
- PCI is the name of a bus system, i.e., the way the CPU talks to
- the other stuff inside your box. Find out if your board/platform
- has PCI.
-
- Note: PCIe support for Synopsys Device will be available only
- when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
- say Y, otherwise N.
-
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
-endmenu
-
source "kernel/power/Kconfig"
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index 4e0df7b7a248..27b9eb97a6bf 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select GENERIC_IRQ_CHIP
select GPIOLIB
select AXS101 if ISA_ARCOMPACT
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 9356753c2ed8..f25c085b9874 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f24a7435d19a..eb82c5cb0ad5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -147,9 +147,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
endif
-config MIGHT_HAVE_PCI
- bool
-
config SYS_SUPPORTS_APM_EMULATION
bool
@@ -318,7 +315,7 @@ config ARCH_MULTIPLATFORM
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select PCI_DOMAINS if PCI
select SPARSE_IRQ
select USE_OF
@@ -392,7 +389,7 @@ config ARCH_IOP13XX
select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
- select PCI
+ select FORCE_PCI
select PLAT_IOP
select VMSPLIT_1G
select SPARSE_IRQ
@@ -406,7 +403,7 @@ config ARCH_IOP32X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
- select PCI
+ select FORCE_PCI
select PLAT_IOP
help
Support for Intel's 80219 and IOP32X (XScale) family of
@@ -419,7 +416,7 @@ config ARCH_IOP33X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
- select PCI
+ select FORCE_PCI
select PLAT_IOP
help
Support for Intel's IOP33X (XScale) family of processors.
@@ -434,7 +431,7 @@ config ARCH_IXP4XX
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GPIOLIB
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
@@ -447,7 +444,7 @@ config ARCH_DOVE
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
@@ -1215,14 +1212,6 @@ config ISA_DMA
config ISA_DMA_API
bool
-config PCI
- bool "PCI support" if MIGHT_HAVE_PCI
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool "Support for multiple PCI domains"
depends on PCI
@@ -1251,8 +1240,6 @@ config PCI_HOST_ITE8152
default y
select DMABOUNCE
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig
index e3cbb07fe1b4..bc04c91294cf 100644
--- a/arch/arm/mach-alpine/Kconfig
+++ b/arch/arm/mach-alpine/Kconfig
@@ -9,7 +9,7 @@ config ARCH_ALPINE
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select MFD_SYSCON
- select PCI
+ select FORCE_PCI
select PCI_HOST_GENERIC
help
This enables support for the Annapurna Labs Alpine V1 boards.
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index cbbdd84cf49a..816a5b89be25 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -9,7 +9,7 @@ config ARCH_CATS
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
- select PCI
+ select FORCE_PCI
help
Say Y here if you intend to run this kernel on the CATS.
@@ -20,7 +20,7 @@ config ARCH_PERSONAL_SERVER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
- select PCI
+ select FORCE_PCI
---help---
Say Y here if you intend to run this kernel on the Compaq
Personal Server.
@@ -53,7 +53,7 @@ config ARCH_EBSA285_HOST
select ISA
select ISA_DMA
select ARCH_MAY_HAVE_PC_FDC
- select PCI
+ select FORCE_PCI
help
Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode.
@@ -67,7 +67,7 @@ config ARCH_NETWINDER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
- select PCI
+ select FORCE_PCI
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index c342dc4e8a45..fea008123eb1 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -7,7 +7,7 @@ comment "IXP4xx Platforms"
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
@@ -15,7 +15,7 @@ config MACH_NSLU2
config MACH_AVILA
bool "Avila"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
@@ -31,7 +31,7 @@ config MACH_LOFT
config ARCH_ADI_COYOTE
bool "Coyote"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
@@ -39,7 +39,7 @@ config ARCH_ADI_COYOTE
config MACH_GATEWAY7001
bool "Gateway 7001"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
@@ -47,7 +47,7 @@ config MACH_GATEWAY7001
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
@@ -107,7 +107,7 @@ config ARCH_PRPMC1100
config MACH_NAS100D
bool
prompt "NAS100D"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
@@ -116,7 +116,7 @@ config MACH_NAS100D
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
@@ -130,7 +130,7 @@ config ARCH_IXDP4XX
config MACH_FSG
bool
prompt "Freecom FSG-3"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
@@ -139,7 +139,7 @@ config MACH_FSG
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
@@ -160,7 +160,7 @@ config CPU_IXP43X
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
- select PCI
+ select FORCE_PCI
help
This board is currently inside the Linksys WRV54G Gateways.
@@ -183,7 +183,7 @@ config MACH_DEVIXP
config MACH_MICCPT
bool "Omicron MICCPT"
- select PCI
+ select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index a545976bdbd6..b3185c05fffa 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
config MACH_KS8695
bool "KS8695 development board"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to run on the original
Kendin-Micrel KS8695 development board.
@@ -52,7 +52,7 @@ config MACH_CM4002
config MACH_CM4008
bool "OpenGear CM4008"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4008 Console Server. See http://www.opengear.com for more
@@ -60,7 +60,7 @@ config MACH_CM4008
config MACH_CM41xx
bool "OpenGear CM41xx"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4016 or CM4048 Console Servers. See http://www.opengear.com for
@@ -68,7 +68,7 @@ config MACH_CM41xx
config MACH_IM4004
bool "OpenGear IM4004"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4004 Secure Access Server. See http://www.opengear.com for
@@ -76,7 +76,7 @@ config MACH_IM4004
config MACH_IM42xx
bool "OpenGear IM42xx"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4216 or IM4248 Console Servers. See http://www.opengear.com for
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 81c0f08a2684..d686a844a790 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -4,7 +4,7 @@ menuconfig ARCH_MV78XX0
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
- select PCI
+ select FORCE_PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 2c20599cc350..5d6fbadd7849 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -124,7 +124,7 @@ config MACH_KIRKWOOD
select MACH_MVEBU_ANY
select ORION_IRQCHIP
select ORION_TIMER
- select PCI
+ select FORCE_PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index a810f4dd34b1..38c45a88c793 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -5,7 +5,7 @@ menuconfig ARCH_ORION5X
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
- select PCI
+ select FORCE_PCI
select PHYLIB if NETDEVICES
select PLAT_ORION_LEGACY
help
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a68b34183107..b185794549be 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -125,7 +125,7 @@ config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index fde7ef1ab192..acb2c520ae8b 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -120,7 +120,7 @@ config SA1100_LART
config SA1100_NANOENGINE
bool "nanoEngine"
select ARM_SA1110_CPUFREQ
- select PCI
+ select FORCE_PCI
select PCI_NANOENGINE
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 787d7850e064..feffc52c823f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -103,6 +103,7 @@ config ARM64
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
+ select HAVE_PCI
select HAVE_ACPI_APEI if (ACPI && EFI)
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
@@ -287,15 +288,6 @@ config ARCH_PROC_KCORE_TEXT
source "arch/arm64/Kconfig.platforms"
-menu "Bus support"
-
-config PCI
- bool "PCI support"
- help
- This feature enables support for PCI bus system. If you say Y
- here, the kernel will include drivers and infrastructure code
- to support PCI bus devices.
-
config PCI_DOMAINS
def_bool PCI
@@ -305,10 +297,6 @@ config PCI_DOMAINS_GENERIC
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
-endmenu
-
menu "Kernel Features"
menu "ARM errata workarounds via the alternatives framework"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 2b688af379e6..bbe928322840 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -47,9 +47,6 @@ config FRAME_POINTER
config LOCKDEP_SUPPORT
def_bool y
-config PCI
- def_bool n
-
config EARLY_PRINTK
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 36773def6920..4dec7457feed 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -10,11 +10,11 @@ config IA64
bool
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
- select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
+ select FORCE_PCI if (!IA64_HP_SIM)
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_EXIT_THREAD
select HAVE_IDE
@@ -544,20 +544,12 @@ if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
-config PCI
- bool "PCI support"
- help
- Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
- here unless you are using a simulator without PCI support.
-
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index aef698fa50e5..8cb0604b195b 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -63,17 +63,6 @@ source "drivers/zorro/Kconfig"
endif
-config PCI
- bool "PCI support"
- depends on M54xx
- help
- Enable the PCI bus. Support for the PCI bus hardware built into the
- ColdFire 547x and 548x processors.
-
-if PCI
-source "drivers/pci/Kconfig"
-endif
-
if !MMU
config ISA_DMA_API
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 21f00349af52..60ac1cd8b96f 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -299,6 +299,7 @@ config M53xx
bool
config M54xx
+ select HAVE_PCI
bool
endif # COLDFIRE
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index effed2efd306..cee1fc849d97 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -30,6 +30,7 @@ config MICROBLAZE
select HAVE_FUNCTION_TRACER
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
+ select HAVE_PCI
select IRQ_DOMAIN
select XILINX_INTC
select MODULES_USE_ELF_RELA
@@ -266,9 +267,6 @@ endmenu
menu "Bus Options"
-config PCI
- bool "PCI support"
-
config PCI_DOMAINS
def_bool PCI
@@ -282,6 +280,4 @@ config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
-source "drivers/pci/Kconfig"
-
endmenu
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7d28c9dd75d0..01be35aeffad 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -73,6 +73,7 @@ config MIPS
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
+ select PCI_DOMAINS if PCI
select PERF_USE_VMALLOC
select RTC_LIB
select SYSCTL_EXCEPTION_TRACE
@@ -95,7 +96,7 @@ config MIPS_GENERIC
select CPU_MIPSR2_IRQ_EI
select CSRC_R4K
select DMA_PERDEV_COHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_AUTO_PFN_OFFSET
@@ -256,7 +257,7 @@ config BCM47XX
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select NO_EXCEPT_FILL
@@ -299,13 +300,12 @@ config MIPS_COBALT
select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select FORCE_PCI
select I8253
select I8259
select IRQ_MIPS_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
- select PCI
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
@@ -422,7 +422,7 @@ config LASAT
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
@@ -502,7 +502,7 @@ config MIPS_MALTA
select HAVE_PCSPKR_PLATFORM
select IRQ_MIPS_CPU
select MIPS_GIC
- select HW_HAS_PCI
+ select HAVE_PCI
select I8253
select I8259
select MIPS_BONITO64
@@ -556,7 +556,7 @@ config MACH_PIC32
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
- select HW_HAS_PCI
+ select HAVE_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
@@ -673,7 +673,7 @@ config SGI_IP27
select BOOT_ELF64
select DEFAULT_SGI_PARTITION
select SYS_HAS_EARLY_PRINTK
- select HW_HAS_PCI
+ select HAVE_PCI
select NR_CPUS_DEFAULT_64
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
@@ -733,7 +733,7 @@ config SGI_IP32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
@@ -843,7 +843,7 @@ config SNI_RM
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select HW_HAS_EISA
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select I8253
select I8259
@@ -876,7 +876,7 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
@@ -903,7 +903,7 @@ config CAVIUM_OCTEON_SOC
select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
- select HW_HAS_PCI
+ select HAVE_PCI
select ZONE_DMA32
select HOLES_IN_ZONE
select GPIOLIB
@@ -936,7 +936,7 @@ config NLM_XLR_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
- select HW_HAS_PCI
+ select HAVE_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
@@ -962,7 +962,7 @@ config NLM_XLP_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select PHYS_ADDR_T_64BIT
@@ -997,7 +997,7 @@ config MIPS_PARAVIRT
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_CAVIUM_OCTEON
- select HW_HAS_PCI
+ select HAVE_PCI
select SWAP_IO_SPACE
help
This option supports guest running under ????
@@ -3027,18 +3027,6 @@ menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
bool
-config HW_HAS_PCI
- bool
-
-config PCI
- bool "Support for PCI controller"
- depends on HW_HAS_PCI
- select PCI_DOMAINS
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
- say Y, otherwise N.
config PCI_DOMAINS
bool
@@ -3054,8 +3042,6 @@ config PCI_DRIVERS_LEGACY
def_bool !PCI_DRIVERS_GENERIC
select NO_GENERIC_PCI_IOPORT_MAP
-source "drivers/pci/Kconfig"
-
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 7d73f7f4202b..83b288b95b16 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -14,7 +14,7 @@ choice
config MIPS_MTX1
bool "4G Systems MTX-1 board"
- select HW_HAS_PCI
+ select HAVE_PCI
select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
@@ -22,7 +22,7 @@ config MIPS_MTX1
config MIPS_DB1XXX
bool "Alchemy DB1XXX / PB1XXX boards"
select GPIOLIB
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
help
@@ -40,7 +40,7 @@ config MIPS_XXS1500
config MIPS_GPR
bool "Trapeze ITS GPR board"
select ALCHEMY_GPIOINT_AU1000
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 2c1dfd06c366..3014c80cf581 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -13,6 +13,5 @@ config PCI_AR2315
bool "Atheros AR2315 PCI controller support"
depends on SOC_AR2315
select ARCH_HAS_PHYS_TO_DMA
- select HW_HAS_PCI
- select PCI
+ select FORCE_PCI
default y
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9547cf1ea38d..191c3910eac5 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -75,11 +75,11 @@ config ATH79_MACH_UBNT_XM
endmenu
config SOC_AR71XX
- select HW_HAS_PCI
+ select HAVE_PCI
def_bool n
config SOC_AR724X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
@@ -90,12 +90,12 @@ config SOC_AR933X
def_bool n
config SOC_AR934X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
config SOC_QCA955X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 96ed735a4f4a..837f6e5a2f37 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -5,17 +5,17 @@ menu "CPU support"
config BCM63XX_CPU_3368
bool "support 3368 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6328
bool "support 6328 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
select SYS_HAS_CPU_BMIPS32_3300
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6345
bool "support 6345 CPU"
@@ -24,22 +24,22 @@ config BCM63XX_CPU_6345
config BCM63XX_CPU_6348
bool "support 6348 CPU"
select SYS_HAS_CPU_BMIPS32_3300
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
endmenu
source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 8e3a1fc2bc39..188de95d6dbd 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -19,7 +19,7 @@ config SOC_AMAZON_SE
config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
- select HW_HAS_PCI
+ select HAVE_PCI
select MFD_SYSCON
select MFD_CORE
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 781a5156ab21..4c14a11525f4 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E
select DMA_NONCOHERENT
select BOOT_ELF32
select BOARD_SCACHE
- select HW_HAS_PCI
+ select HAVE_PCI
select I8259
select ISA
select IRQ_MIPS_CPU
@@ -46,7 +46,7 @@ config LEMOTE_MACH2F
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select HAVE_CLK
- select HW_HAS_PCI
+ select HAVE_PCI
select I8259
select IRQ_MIPS_CPU
select ISA
@@ -74,9 +74,8 @@ config LOONGSON_MACH3X
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
- select HW_HAS_PCI
+ select FORCE_PCI
select ISA
- select PCI
select I8259
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index d319bc0c3df6..b185b7620c97 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,25 +6,25 @@ choice
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
- select HW_HAS_PCI
+ select HAVE_PCI
select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select IRQ_MSP_SLP
- select HW_HAS_PCI
+ select HAVE_PCI
config PMC_MSP7120_EVAL
bool "PMC-Sierra MSP7120 Eval Board"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
config PMC_MSP7120_GW
bool "PMC-Sierra MSP7120 Residential Gateway"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
select MSP_HAS_USB
select MSP_ETH
@@ -32,7 +32,7 @@ config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
endchoice
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 1f9cb0e3c79a..4c8006b4a5f7 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -27,18 +27,18 @@ choice
config SOC_RT288X
bool "RT288x"
select MIPS_L1_CACHE_SHIFT_4
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_RT305X
bool "RT305x"
config SOC_RT3883
bool "RT3883"
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_MT7620
bool "MT7620/8"
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_MT7621
bool "MT7621"
@@ -50,7 +50,7 @@ choice
select MIPS_GIC
select COMMON_CLK
select CLKSRC_MIPS_GIC
- select HW_HAS_PCI
+ select HAVE_PCI
endchoice
choice
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 7ec278d72096..470d46183677 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,7 +3,7 @@ config SIBYTE_SB1250
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
@@ -23,7 +23,7 @@ config SIBYTE_BCM1125
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
@@ -33,7 +33,7 @@ config SIBYTE_BCM1125H
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI
@@ -52,7 +52,7 @@ config SIBYTE_BCM1x80
bool
select CEVT_BCM1480
select CSRC_BCM1480
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@@ -62,7 +62,7 @@ config SIBYTE_BCM1x55
bool
select CEVT_BCM1480
select CSRC_BCM1480
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..9a22a182b7a4 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -59,7 +59,7 @@ config SOC_TX3927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select GPIO_TXX9
@@ -67,7 +67,7 @@ config SOC_TX4927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
@@ -77,7 +77,7 @@ config SOC_TX4938
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
@@ -87,7 +87,7 @@ config SOC_TX4939
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_TX4927
select HAS_TXX9_ACLC
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..e0b651db371d 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -30,7 +30,7 @@ config TANBAC_TB022X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
@@ -46,7 +46,7 @@ config VICTOR_MPC30X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -57,7 +57,7 @@ config ZAO_CAPCELLA
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -99,6 +99,6 @@ endchoice
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && HW_HAS_PCI
+ depends on MACH_VR41XX && HAVE_PCI
default y
select PCI
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 92a339ee28b3..b41d7e6aaa18 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -17,6 +17,7 @@ config PARISC
select INIT_ALL_POSSIBLE
select BUG
select BUILDTIME_EXTABLE_SORT
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8be31261aec8..8eba699e8ea3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -168,6 +168,7 @@ config PPC
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
+ select GENERIC_PCI_IOMAP if PCI
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
@@ -930,23 +931,6 @@ config FSL_GTM
help
Freescale General-purpose Timers support
-# Platforms that what PCI turned unconditionally just do select PCI
-# in their config node. Platforms that want to choose at config
-# time should select PPC_PCI_CHOICE
-config PPC_PCI_CHOICE
- bool
-
-config PCI
- bool "PCI support" if PPC_PCI_CHOICE
- default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
- && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
- select GENERIC_PCI_IOMAP
- help
- Find out whether your system includes a PCI bus. PCI is the name of
- a bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you say Y here, the kernel will include drivers and
- infrastructure code to support PCI bus devices.
-
config PCI_DOMAINS
def_bool PCI
@@ -959,8 +943,6 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 5326ece36120..ad2bb1408b4c 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -11,7 +11,7 @@ config EP405
bool "EP405/EP405PC"
depends on 40x
select 405GP
- select PCI
+ select FORCE_PCI
help
This option enables support for the EP405/EP405PC boards.
@@ -19,7 +19,7 @@ config HOTFOOT
bool "Hotfoot"
depends on 40x
select PPC40x_SIMPLE
- select PCI
+ select FORCE_PCI
help
This option enables support for the ESTEEM 195E Hotfoot board.
@@ -29,7 +29,7 @@ config KILAUEA
select 405EX
select PPC40x_SIMPLE
select PPC4xx_PCI_EXPRESS
- select PCI
+ select FORCE_PCI
select PCI_MSI
select PPC4xx_MSI
help
@@ -39,7 +39,7 @@ config MAKALU
bool "Makalu"
depends on 40x
select 405EX
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PPC40x_SIMPLE
help
@@ -50,7 +50,7 @@ config WALNUT
depends on 40x
default y
select 405GP
- select PCI
+ select FORCE_PCI
select OF_RTC
help
This option enables support for the IBM PPC405GP evaluation board.
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 9a85d350b1b6..4a9a72d01c3c 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -12,7 +12,7 @@ config BAMBOO
depends on 44x
select PPC44x_SIMPLE
select 440EP
- select PCI
+ select FORCE_PCI
help
This option enables support for the IBM PPC440EP evaluation board.
@@ -21,7 +21,7 @@ config BLUESTONE
depends on 44x
select PPC44x_SIMPLE
select APM821xx
- select PCI
+ select FORCE_PCI
select PCI_MSI
select PPC4xx_MSI
select PPC4xx_PCI_EXPRESS
@@ -34,7 +34,7 @@ config EBONY
depends on 44x
default y
select 440GP
- select PCI
+ select FORCE_PCI
select OF_RTC
help
This option enables support for the IBM PPC440GP evaluation board.
@@ -43,7 +43,7 @@ config SAM440EP
bool "Sam440ep"
depends on 44x
select 440EP
- select PCI
+ select FORCE_PCI
help
This option enables support for the ACube Sam440ep board.
@@ -60,7 +60,7 @@ config TAISHAN
depends on 44x
select PPC44x_SIMPLE
select 440GX
- select PCI
+ select FORCE_PCI
help
This option enables support for the AMCC PPC440GX "Taishan"
evaluation board.
@@ -70,7 +70,7 @@ config KATMAI
depends on 44x
select PPC44x_SIMPLE
select 440SPe
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
@@ -82,7 +82,7 @@ config RAINIER
depends on 44x
select PPC44x_SIMPLE
select 440GRX
- select PCI
+ select FORCE_PCI
help
This option enables support for the AMCC PPC440GRX evaluation board.
@@ -103,7 +103,7 @@ config ARCHES
depends on 44x
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC Dual PPC460GT evaluation board.
@@ -112,7 +112,7 @@ config CANYONLANDS
bool "Canyonlands"
depends on 44x
select 460EX
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
@@ -126,7 +126,7 @@ config GLACIER
depends on 44x
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII if IBM_EMAC
select IBM_EMAC_ZMII if IBM_EMAC
@@ -138,7 +138,7 @@ config REDWOOD
depends on 44x
select PPC44x_SIMPLE
select 460SX
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
@@ -150,7 +150,7 @@ config EIGER
depends on 44x
select PPC44x_SIMPLE
select 460SX
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII if IBM_EMAC
help
@@ -161,7 +161,7 @@ config YOSEMITE
depends on 44x
select PPC44x_SIMPLE
select 440EP
- select PCI
+ select FORCE_PCI
help
This option enables support for the AMCC PPC440EP evaluation board.
@@ -201,7 +201,7 @@ config AKEBONO
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
- select PCI
+ select FORCE_PCI
select PCI_MSI
select PPC4xx_HSTA_MSI
select I2C
@@ -226,7 +226,7 @@ config ICON
depends on 44x
select PPC44x_SIMPLE
select 440SPe
- select PCI
+ select FORCE_PCI
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC PPC440SPe evaluation board.
@@ -250,7 +250,7 @@ config XILINX_VIRTEX440_GENERIC_BOARD
config XILINX_ML510
bool "Xilinx ML510 extra support"
depends on XILINX_VIRTEX440_GENERIC_BOARD
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select XILINX_PCI if PCI
select PPC_INDIRECT_PCI if PCI
select PPC_I8259 if PCI
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b59eab6cbb1b..d3716bf68f97 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -5,7 +5,7 @@ config PPC_MPC512x
select COMMON_CLK
select FSL_SOC
select IPIC
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select FSL_PCI if PCI
select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 55a587070342..b46850e039ee 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -3,7 +3,7 @@ config PPC_MPC52xx
bool "52xx-based boards"
depends on 6xx
select COMMON_CLK
- select PPC_PCI_CHOICE
+ select HAVE_PCI
config PPC_MPC5200_SIMPLE
bool "Generic support for simple MPC5200 based boards"
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 071f53b0c0a0..9b225d2341c7 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,7 @@ menuconfig PPC_83xx
bool "83xx-based boards"
depends on 6xx
select PPC_UDBG_16550
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select FSL_PCI if PCI
select FSL_SOC
select IPIC
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 68920d42b4bc..ba0ea84ce578 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -5,7 +5,7 @@ menuconfig FSL_SOC_BOOKE
select FSL_SOC
select PPC_UDBG_16550
select MPIC
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select FSL_PCI if PCI
select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index bcd179d3ed92..a4fa31a40502 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -70,7 +70,7 @@ endif
config MPC8641
bool
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
@@ -79,7 +79,7 @@ config MPC8641
config MPC8610
bool
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 260a56b7602d..33586c1a39aa 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -265,7 +265,7 @@ config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select GPIOLIB
help
The CPM2 (Communications Processor Module) is a coprocessor on
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f4e2c5729374..24638c45e3b7 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -39,14 +39,14 @@ config 40x
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
- select PPC_PCI_CHOICE
+ select HAVE_PCI
config 44x
bool "AMCC 44x, 46x or 47x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
- select PPC_PCI_CHOICE
+ select HAVE_PCI
select PHYS_64BIT
config E200
diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig
index 03dc1e37c25b..977d281b4365 100644
--- a/arch/powerpc/platforms/amigaone/Kconfig
+++ b/arch/powerpc/platforms/amigaone/Kconfig
@@ -5,7 +5,7 @@ config AMIGAONE
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
- select PCI
+ select FORCE_PCI
select NOT_COHERENT_CACHE
select CHECK_CACHE_COHERENCY
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 4b2f114f3116..0f7c8241912b 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -27,7 +27,7 @@ config PPC_IBM_CELL_BLADE
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
select PPC_CELL_NATIVE
select PPC_OF_PLATFORM_PCI
- select PCI
+ select FORCE_PCI
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
index ead99eff875a..c11d33b246e3 100644
--- a/arch/powerpc/platforms/chrp/Kconfig
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -12,5 +12,5 @@ config PPC_CHRP
select PPC_MPC106
select PPC_UDBG_16550
select PPC_NATIVE
- select PCI
+ select FORCE_PCI
default y
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 8ea16db5ff48..fcb88f6946ed 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -52,7 +52,7 @@ config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
select MPIC
- select PCI
+ select FORCE_PCI
select PPC_INDIRECT_PCI
select PPC_I8259
select PPC_NATIVE
@@ -63,7 +63,7 @@ config MVME5100
config TSI108_BRIDGE
bool
- select PCI
+ select FORCE_PCI
select MPIC
select MPIC_WEIRD
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index 2601fac50354..08d530a2a8b1 100644
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -2,7 +2,7 @@
config PPC_MAPLE
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "Maple 970FX Evaluation Board"
- select PCI
+ select FORCE_PCI
select MPIC
select U3_DART
select MPIC_U3_HT_IRQS
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 98e3bc22bebc..c52731a7773f 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -3,7 +3,7 @@ config PPC_PASEMI
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "PA Semi SoC-based platforms"
select MPIC
- select PCI
+ select FORCE_PCI
select PPC_UDBG_16550
select PPC_NATIVE
select MPIC_BROKEN_REGREAD
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index fc90cb35cea3..f834a19ed772 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -3,7 +3,7 @@ config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_BOOK3S && CPU_BIG_ENDIAN
select MPIC
- select PCI
+ select FORCE_PCI
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
select PPC_NATIVE
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 99083fe992d5..850eee860cf2 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -7,7 +7,7 @@ config PPC_POWERNV
select PPC_ICP_NATIVE
select PPC_XIVE_NATIVE
select PPC_P7_NAP
- select PCI
+ select FORCE_PCI
select PCI_MSI
select EPAPR_BOOT
select PPC_INDIRECT_PIO
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 24864b8aaf5d..e32406e918d0 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -6,7 +6,7 @@ config PPC_PS3
select USB_OHCI_LITTLE_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_MMIO
- select PPC_PCI_CHOICE
+ select HAVE_PCI
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor. Enabling this
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 2e4bd32154b5..1040daa166b4 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -5,7 +5,7 @@ config PPC_PSERIES
select HAVE_PCSPKR_PLATFORM
select MPIC
select OF_DYNAMIC
- select PCI
+ select FORCE_PCI
select PCI_MSI
select PPC_XICS
select PPC_XIVE_SPAPR
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 55da93f4e818..f17a39fe9408 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -38,8 +38,10 @@ config RISCV
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PCI
select MODULES_USE_ELF_RELA if MODULES
select THREAD_INFO_IN_TASK
+ select PCI_MSI if PCI
select RISCV_TIMER
select GENERIC_IRQ_MULTI_HANDLER
select ARCH_HAS_PTE_SPECIAL
@@ -263,28 +265,12 @@ config CMDLINE_FORCE
endmenu
-menu "Bus support"
-
-config PCI
- bool "PCI support"
- select PCI_MSI
- help
- This feature enables support for PCI bus system. If you say Y
- here, the kernel will include drivers and infrastructure code
- to support PCI bus devices.
-
- If you don't know what to do here, say Y.
-
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI
-source "drivers/pci/Kconfig"
-
-endmenu
-
menu "Power management options"
source kernel/power/Kconfig
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 5173366af8f3..9f05625d75b9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -168,14 +168,20 @@ config S390
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NOP_MCOUNT
select HAVE_OPROFILE
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING
+ select IOMMU_HELPER if PCI
+ select IOMMU_SUPPORT if PCI
select MODULES_USE_ELF_RELA
+ select NEED_DMA_MAP_STATE if PCI
+ select NEED_SG_DMA_LENGTH if PCI
select OLD_SIGACTION
select OLD_SIGSUSPEND3
+ select PCI_MSI if PCI
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
@@ -706,17 +712,6 @@ config QDIO
If unsure, say Y.
-menuconfig PCI
- bool "PCI support"
- select PCI_MSI
- select IOMMU_HELPER
- select IOMMU_SUPPORT
- select NEED_DMA_MAP_STATE
- select NEED_SG_DMA_LENGTH
-
- help
- Enable PCI support.
-
if PCI
config PCI_NR_FUNCTIONS
@@ -727,8 +722,6 @@ config PCI_NR_FUNCTIONS
This allows you to specify the maximum number of PCI functions which
this kernel will support.
-source "drivers/pci/Kconfig"
-
endif # PCI
config PCI_DOMAINS
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f82a4da7adf3..479566c76562 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -40,13 +40,16 @@ config SUPERH
select GENERIC_IDLE_POLL_SETUP
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+ select GENERIC_PCI_IOMAP if PCI
select GENERIC_SCHED_CLOCK
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
select MODULES_USE_ELF_RELA
+ select NO_GENERIC_PCI_IOPORT_MAP if PCI
select OLD_SIGSUSPEND
select OLD_SIGACTION
+ select PCI_DOMAINS if PCI
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
@@ -130,9 +133,6 @@ config SYS_SUPPORTS_SMP
config SYS_SUPPORTS_NUMA
bool
-config SYS_SUPPORTS_PCI
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -855,22 +855,9 @@ config MAPLE
Dreamcast with a serial line terminal or a remote network
connection.
-config PCI
- bool "PCI support"
- depends on SYS_SUPPORTS_PCI
- select PCI_DOMAINS
- select GENERIC_PCI_IOMAP
- select NO_GENERIC_PCI_IOPORT_MAP
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 6394b4f0a69b..b9a37057b77a 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -101,7 +101,7 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -129,7 +129,7 @@ config SH_HP6XX
config SH_DREAMCAST
bool "Dreamcast"
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -139,7 +139,7 @@ config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
@@ -149,7 +149,7 @@ config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
@@ -158,7 +158,7 @@ config SH_SECUREEDGE5410
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
@@ -176,7 +176,7 @@ config SH_RSK
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
@@ -184,7 +184,7 @@ config SH_SDK7780
config SH_SDK7786
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select NO_IOPORT_MAP if !PCI
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
@@ -195,7 +195,7 @@ config SH_SDK7786
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select IO_TRAPPED if MMU
config SH_SH7757LCR
@@ -207,7 +207,7 @@ config SH_SH7757LCR
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
@@ -229,7 +229,7 @@ config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
select GPIOLIB
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select NO_IOPORT_MAP if !PCI
config SH_MIGOR
@@ -302,7 +302,7 @@ config SH_SH4202_MICRODEV
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
@@ -310,7 +310,7 @@ config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
@@ -325,7 +325,7 @@ config SH_SHMIN
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
@@ -346,7 +346,7 @@ config SH_MAGIC_PANEL_R2
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select ARCH_MIGHT_HAVE_PC_SERIO
config SH_POLARIS
@@ -380,7 +380,7 @@ config SH_APSH4A3A
config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 490b2c95c212..5a4d5264822b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -21,6 +21,7 @@ config SPARC
select HAVE_ARCH_KGDB if !SMP || SPARC64
select HAVE_ARCH_TRACEHOOK
select HAVE_EXIT_THREAD
+ select HAVE_PCI
select SYSCTL_EXCEPTION_TRACE
select RTC_CLASS
select RTC_DRV_M48T59
@@ -472,18 +473,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
-config PCI
- bool "Support for PCI and PS/2 keyboard/mouse"
- help
- Find out whether your system includes a PCI bus. PCI is the name of
- a bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you say Y here, the kernel will include drivers and
- infrastructure code to support PCI bus devices.
-
- CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
- CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
- All of these platforms are extremely obscure, so say N if unsure.
-
config PCI_DOMAINS
def_bool PCI if SPARC64
@@ -518,8 +507,6 @@ config SPARC_GRPCI2
help
Say Y here to include the GRPCI2 Host Bridge Driver.
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
config SUN_OPENPROMFS
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6b9938919f0b..de982541a059 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -31,9 +31,6 @@ config ISA
config SBUS
bool
-config PCI
- bool
-
config PCMCIA
bool
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index a4c05159dca5..4658859c6aee 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -11,6 +11,7 @@ config UNICORE32
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_PCI
select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
@@ -118,16 +119,6 @@ endmenu
menu "Bus support"
-config PCI
- bool "PCI Support"
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9d734f3c8234..a8da60284822 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -180,6 +180,7 @@ config X86
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+ select HAVE_PCI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE if PARAVIRT
@@ -2572,15 +2573,6 @@ endmenu
menu "Bus options (PCI etc.)"
-config PCI
- bool "PCI support"
- default y
- ---help---
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
choice
prompt "PCI access mode"
depends on X86_32 && PCI
@@ -2663,8 +2655,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
-source "drivers/pci/Kconfig"
-
config ISA_BUS
bool "ISA bus support on modern systems" if EXPERT
help
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 6c3ab05c231d..4bb95d7ad947 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -69,6 +69,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index ac9ae487cfeb..0fed049422a8 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -67,6 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCCARD=y
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d29b7365da8d..2865a556163a 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -26,6 +26,7 @@ config XTENSA
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_OPROFILE
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_STACKPROTECTOR
select IRQ_DOMAIN
@@ -379,21 +380,6 @@ config XTENSA_CALIBRATE_CCOUNT
config SERIAL_CONSOLE
def_bool n
-menu "Bus options"
-
-config PCI
- bool "PCI support"
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
-endmenu
-
menu "Platform options"
choice
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index 4bcc76b02109..fa9389869154 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -1,3 +1,4 @@
+CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 4bb5b76d9524..68bf923aec8f 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -4,7 +4,6 @@ CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PCI is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/drivers/Kconfig b/drivers/Kconfig
index ab4d43923c4d..059573823387 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,7 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
menu "Device Drivers"
+# Keep I/O buses first
+
source "drivers/amba/Kconfig"
+source "drivers/pci/Kconfig"
+
source "drivers/base/Kconfig"
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 5a48b5606110..5bbfea1a019c 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -63,17 +63,6 @@ config ISA
If you want to plug an ISA card into your EISA bus, say Y here.
Most people should say N.
-config PCI
- bool "PCI support"
- help
- All recent HP machines have PCI slots, and you should say Y here
- if you have a recent machine. If you are convinced you do not have
- PCI slots in your machine (eg a 712), then you may say "N" here.
- Beware that some GSC cards have a Dino onboard and PCI inside them,
- so it may be safest to say "Y" anyway.
-
-source "drivers/pci/Kconfig"
-
config GSC_DINO
bool "GSCtoPCI/Dino PCI support"
depends on PCI && GSC
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2dcc30429e8b..a8128a1946a2 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -3,6 +3,24 @@
# PCI configuration
#
+# select this to offer the PCI prompt
+config HAVE_PCI
+ bool
+
+# select this to unconditionally force on PCI support
+config FORCE_PCI
+ select HAVE_PCI
+ select PCI
+ bool
+
+menuconfig PCI
+ bool "PCI support"
+ depends on HAVE_PCI
+ help
+ This option enables support for the PCI local bus, including
+ support for PCI-X and the foundations for PCI Express support.
+ Say 'Y' here unless you know what you are doing.
+
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig
index d1e7e4199432..17bbdc9bbde0 100644
--- a/drivers/pci/endpoint/Kconfig
+++ b/drivers/pci/endpoint/Kconfig
@@ -7,7 +7,7 @@ menu "PCI Endpoint"
config PCI_ENDPOINT
bool "PCI Endpoint Support"
- depends on HAS_DMA
+ depends on HAVE_PCI
help
Enable this configuration option to support configurable PCI
endpoint. This should be enabled if the platform has a PCI
--
2.19.1
This option is always selected from LOONGSON_MACH3X. Switch to just
seleting PCI from that option and definining LOONGSON_PCIIO_BASE based
on CONFIG_LOONGSON_MACH3X.
Signed-off-by: Christoph Hellwig <[email protected]>
---
arch/mips/Kconfig | 11 -----------
arch/mips/include/asm/mach-loongson64/loongson.h | 2 +-
arch/mips/loongson64/Kconfig | 2 +-
3 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8272ea4c7264..7d28c9dd75d0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3040,17 +3040,6 @@ config PCI
your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
say Y, otherwise N.
-config HT_PCI
- bool "Support for HT-linked PCI"
- default y
- depends on CPU_LOONGSON3
- select PCI
- select PCI_DOMAINS
- help
- Loongson family machines use Hyper-Transport bus for inter-core
- connection and device connection. The PCI bus is a subordinate
- linked at HT. Choose Y for Loongson-3 based machines.
-
config PCI_DOMAINS
bool
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index d0ae5d55413b..b6870fec0f99 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -113,7 +113,7 @@ static inline void do_perfcnt_IRQ(void)
#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
-#if defined(CONFIG_HT_PCI)
+#ifdef CONFIG_CPU_LOONGSON3
#define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base
#else
#define LOONGSON_PCIIO_BASE 0x1fd00000
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c865b4b9b775..781a5156ab21 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -76,7 +76,7 @@ config LOONGSON_MACH3X
select CPU_HAS_WB
select HW_HAS_PCI
select ISA
- select HT_PCI
+ select PCI
select I8259
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
--
2.19.1
On Thu, Nov 15, 2018 at 8:06 PM Christoph Hellwig <[email protected]> wrote:
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAVE_PCI symbol that indicates availability
> of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
> rest in drivers/pci.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> Reviewed-by: Palmer Dabbelt <[email protected]>
> Acked-by: Max Filippov <[email protected]>
> Acked-by: Thomas Gleixner <[email protected]>
> Acked-by: Bjorn Helgaas <[email protected]>
For m68k:
Acked-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Christoph,
On Thu, Nov 15, 2018 at 08:05:31PM +0100, Christoph Hellwig wrote:
> This option is always selected from LOONGSON_MACH3X. Switch to just
> seleting PCI from that option and definining LOONGSON_PCIIO_BASE based
> on CONFIG_LOONGSON_MACH3X.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> ---
> arch/mips/Kconfig | 11 -----------
> arch/mips/include/asm/mach-loongson64/loongson.h | 2 +-
> arch/mips/loongson64/Kconfig | 2 +-
> 3 files changed, 2 insertions(+), 13 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 8272ea4c7264..7d28c9dd75d0 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -3040,17 +3040,6 @@ config PCI
> your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
> say Y, otherwise N.
>
> -config HT_PCI
> - bool "Support for HT-linked PCI"
> - default y
> - depends on CPU_LOONGSON3
> - select PCI
> - select PCI_DOMAINS
> - help
> - Loongson family machines use Hyper-Transport bus for inter-core
> - connection and device connection. The PCI bus is a subordinate
> - linked at HT. Choose Y for Loongson-3 based machines.
> -
> config PCI_DOMAINS
> bool
>
> diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
> index c865b4b9b775..781a5156ab21 100644
> --- a/arch/mips/loongson64/Kconfig
> +++ b/arch/mips/loongson64/Kconfig
> @@ -76,7 +76,7 @@ config LOONGSON_MACH3X
> select CPU_HAS_WB
> select HW_HAS_PCI
> select ISA
> - select HT_PCI
> + select PCI
> select I8259
> select IRQ_MIPS_CPU
> select NR_CPUS_DEFAULT_4
Should this also select PCI_DOMAINS to preserve the existing behavior?
If not, could you explain why in the commit message?
Thanks,
Paul
On Mon, Nov 19, 2018 at 01:01:41PM -0800, Paul Burton wrote:
> On Thu, Nov 15, 2018 at 08:05:31PM +0100, Christoph Hellwig wrote:
> > This option is always selected from LOONGSON_MACH3X. Switch to just
> > seleting PCI from that option and definining LOONGSON_PCIIO_BASE based
> > on CONFIG_LOONGSON_MACH3X.
> >
> > Signed-off-by: Christoph Hellwig <[email protected]>
> > ---
> > arch/mips/Kconfig | 11 -----------
> > arch/mips/include/asm/mach-loongson64/loongson.h | 2 +-
> > arch/mips/loongson64/Kconfig | 2 +-
> > 3 files changed, 2 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> > index 8272ea4c7264..7d28c9dd75d0 100644
> > --- a/arch/mips/Kconfig
> > +++ b/arch/mips/Kconfig
> > @@ -3040,17 +3040,6 @@ config PCI
> > your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
> > say Y, otherwise N.
> >
> > -config HT_PCI
> > - bool "Support for HT-linked PCI"
> > - default y
> > - depends on CPU_LOONGSON3
> > - select PCI
> > - select PCI_DOMAINS
> > - help
> > - Loongson family machines use Hyper-Transport bus for inter-core
> > - connection and device connection. The PCI bus is a subordinate
> > - linked at HT. Choose Y for Loongson-3 based machines.
> > -
> > config PCI_DOMAINS
> > bool
> >
> > diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
> > index c865b4b9b775..781a5156ab21 100644
> > --- a/arch/mips/loongson64/Kconfig
> > +++ b/arch/mips/loongson64/Kconfig
> > @@ -76,7 +76,7 @@ config LOONGSON_MACH3X
> > select CPU_HAS_WB
> > select HW_HAS_PCI
> > select ISA
> > - select HT_PCI
> > + select PCI
> > select I8259
> > select IRQ_MIPS_CPU
> > select NR_CPUS_DEFAULT_4
>
> Should this also select PCI_DOMAINS to preserve the existing behavior?
>
> If not, could you explain why in the commit message?
Ah, I see - PCI already selects PCI_DOMAINS. I think it would have been
worth mentioning but I don't mind if you don't think it a big enough
deal to respin the patch, so:
Acked-by: Paul Burton <[email protected]>
Thanks,
Paul
Hi Christoph,
On Thu, Nov 15, 2018 at 08:05:32PM +0100, Christoph Hellwig wrote:
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAVE_PCI symbol that indicates availability
> of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
> rest in drivers/pci.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> Reviewed-by: Palmer Dabbelt <[email protected]>
> Acked-by: Max Filippov <[email protected]>
> Acked-by: Thomas Gleixner <[email protected]>
> Acked-by: Bjorn Helgaas <[email protected]>
> Acked-by: Geert Uytterhoeven <[email protected]>
For patches 4, 5, 7, 8 & 9:
Acked-by: Paul Burton <[email protected]> # MIPS parts
Thanks,
Paul
On Fri, Nov 16, 2018 at 4:06 AM Christoph Hellwig <[email protected]> wrote:
>
> Let architectures opt into EISA support by selecting HAS_EISA and
I locally fixed the commit log (HAS_EISA -> HAVE_EISA)
so that it matches to the code.
Thanks.
> handle everything else in drivers/eisa.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> Acked-by: Thomas Gleixner <[email protected]>
> ---
--
Best Regards
Masahiro Yamada
On Fri, Nov 16, 2018 at 4:06 AM Christoph Hellwig <[email protected]> wrote:
>
> Without PCI support the kernel won't even compile, so force it on.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> ---
I do not understand this patch
because alpha already enables PCI forcibly.
'No prompt' + 'default y' means always on.
config PCI
bool
depends on !ALPHA_JENSEN
select GENERIC_PCI_IOMAP
default y
I squashed this patch to "PCI: consolidate PCI config entry ..."
because you will replace it to FORCE_PCI anyway.
> arch/alpha/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
> index 5b4f88363453..65f6d0bf69d4 100644
> --- a/arch/alpha/Kconfig
> +++ b/arch/alpha/Kconfig
> @@ -6,6 +6,7 @@ config ALPHA
> select ARCH_MIGHT_HAVE_PC_SERIO
> select ARCH_NO_PREEMPT
> select ARCH_USE_CMPXCHG_LOCKREF
> + select PCI if !ALPHA_JENSEN
> select HAVE_AOUT
> select HAVE_IDE
> select HAVE_OPROFILE
> --
> 2.19.1
>
--
Best Regards
Masahiro Yamada
Hi Christoph,
On Fri, Nov 16, 2018 at 4:08 AM Christoph Hellwig <[email protected]> wrote:
>
> Hi all,
>
> currently every architecture that wants to provide on of the common
> periphal busses needs to add some boilerplate code and include the
> right Kconfig files. This series instead just selects the presence
> (when needed) and then handles everything in the bus-specific
> Kconfig file under drivers/.
Thanks for this work!
I applied this series, and it is available at
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
kconfig2
I made local fixups in some parts,
where I left comments in individual patches.
> Changes since v3:
> - drop the patches already merged
> - fix a typo in the PCI help text
> - split the always enable PCI on alpha change into a separate patch
> - remove the mips HT_PCI symbol
> - add a new FORCE_PCI symbol to easily allow selecting PCI support
> - new patch to consolidate PCI_DOMAINS
> - new patch to consolidate PCI_SYSCALL
>
> Changes since v2:
> - depend on HAVE_PCI for PCIe endpoint code
> - fix some commit message typos
> - remove CONFIG_PCI from xtensa iss defconfig
> - drop EISA support from arm
> - clean up EISA selection for alpha
>
> Changes since v1:
> - rename all HAS_* Kconfig symbols to HAVE_*
> - drop the CONFIG_PCI_QSPAN option entirely
> - drop duplicate select from powerpc
> - restore missing selection of PCI_MSI for riscv
> - update x86 and riscv defconfigs to include PCI
> - actually inclue drivers/eisa/Kconfig
> - adjust some captilizations
--
Best Regards
Masahiro Yamada
On Fri, Nov 16, 2018 at 4:07 AM Christoph Hellwig <[email protected]> wrote:
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index a8128a1946a2..95812fc4958c 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -21,6 +21,15 @@ menuconfig PCI
> support for PCI-X and the foundations for PCI Express support.
> Say 'Y' here unless you know what you are doing.
>
> +config PCI_DOMAINS
> + depends on PCI
> + bool
> +
> +config PCI_DOMAINS_GENERIC
> + depends on PCI
> + select PCI_DOMAINS
> + bool
> +
> source "drivers/pci/pcie/Kconfig"
>
> config PCI_MSI
I reordered this so it 'bool' comes first.
config PCI_DOMAINS
bool
depends on PCI
config PCI_DOMAINS_GENERIC
bool
depends on PCI
select PCI_DOMAINS
Of course, it is just a matter of slight taste.
I just wanted the code to look consistent.
--
Best Regards
Masahiro Yamada
On Fri, Nov 23, 2018 at 11:32 AM Masahiro Yamada
<[email protected]> wrote:
>
> Hi Christoph,
>
>
> On Fri, Nov 16, 2018 at 4:08 AM Christoph Hellwig <[email protected]> wrote:
> >
> > Hi all,
> >
> > currently every architecture that wants to provide on of the common
> > periphal busses needs to add some boilerplate code and include the
> > right Kconfig files. This series instead just selects the presence
> > (when needed) and then handles everything in the bus-specific
> > Kconfig file under drivers/.
>
>
> Thanks for this work!
>
>
> I applied this series, and it is available at
>
> git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
> kconfig2
BTW, if you find questionable parts,
please let me know.
We still have plenty of time by the next MW.
Thanks.
--
Best Regards
Masahiro Yamada
On Tue, Nov 20, 2018 at 6:07 AM Paul Burton <[email protected]> wrote:
>
> On Mon, Nov 19, 2018 at 01:01:41PM -0800, Paul Burton wrote:
> > On Thu, Nov 15, 2018 at 08:05:31PM +0100, Christoph Hellwig wrote:
> > > This option is always selected from LOONGSON_MACH3X. Switch to just
> > > seleting PCI from that option and definining LOONGSON_PCIIO_BASE based
> > > on CONFIG_LOONGSON_MACH3X.
> > >
> > > Signed-off-by: Christoph Hellwig <[email protected]>
> > > ---
> > > arch/mips/Kconfig | 11 -----------
> > > arch/mips/include/asm/mach-loongson64/loongson.h | 2 +-
> > > arch/mips/loongson64/Kconfig | 2 +-
> > > 3 files changed, 2 insertions(+), 13 deletions(-)
> > >
> > > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> > > index 8272ea4c7264..7d28c9dd75d0 100644
> > > --- a/arch/mips/Kconfig
> > > +++ b/arch/mips/Kconfig
> > > @@ -3040,17 +3040,6 @@ config PCI
> > > your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
> > > say Y, otherwise N.
> > >
> > > -config HT_PCI
> > > - bool "Support for HT-linked PCI"
> > > - default y
> > > - depends on CPU_LOONGSON3
> > > - select PCI
> > > - select PCI_DOMAINS
> > > - help
> > > - Loongson family machines use Hyper-Transport bus for inter-core
> > > - connection and device connection. The PCI bus is a subordinate
> > > - linked at HT. Choose Y for Loongson-3 based machines.
> > > -
> > > config PCI_DOMAINS
> > > bool
> > >
> > > diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
> > > index c865b4b9b775..781a5156ab21 100644
> > > --- a/arch/mips/loongson64/Kconfig
> > > +++ b/arch/mips/loongson64/Kconfig
> > > @@ -76,7 +76,7 @@ config LOONGSON_MACH3X
> > > select CPU_HAS_WB
> > > select HW_HAS_PCI
> > > select ISA
> > > - select HT_PCI
> > > + select PCI
> > > select I8259
> > > select IRQ_MIPS_CPU
> > > select NR_CPUS_DEFAULT_4
> >
> > Should this also select PCI_DOMAINS to preserve the existing behavior?
> >
> > If not, could you explain why in the commit message?
>
> Ah, I see - PCI already selects PCI_DOMAINS. I think it would have been
> worth mentioning
OK, I added "PCI already selects PCI_DOMAINS"
in the commit description.
> but I don't mind if you don't think it a big enough
> deal to respin the patch, so:
>
> Acked-by: Paul Burton <[email protected]>
>
> Thanks,
> Paul
--
Best Regards
Masahiro Yamada
On Fri, Nov 16, 2018 at 4:06 AM Christoph Hellwig <[email protected]> wrote:
>
> No arm config enables EISA, and arm does not include drivers/eisa/Kconfig
> which provides support for things like PCI to EISA bridges, so it is most
> likely dead.
As I said before, this is absolutely dead.
Only the difference between arch/powerpc/Kconfig and arch/arm/Kconfig
is the presence of ---help--- property.
I squashed this to "eisa: consolidate EISA ..."
> Suggested-by: Masahiro Yamada <[email protected]>
> Signed-off-by: Christoph Hellwig <[email protected]>
> ---
> arch/arm/Kconfig | 15 ---------------
> 1 file changed, 15 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 91be74d8df65..f24a7435d19a 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -163,21 +163,6 @@ config HAVE_PROC_CPU
> config NO_IOPORT_MAP
> bool
>
> -config EISA
> - bool
> - ---help---
> - The Extended Industry Standard Architecture (EISA) bus was
> - developed as an open alternative to the IBM MicroChannel bus.
> -
> - The EISA bus provided some of the features of the IBM MicroChannel
> - bus while maintaining backward compatibility with cards made for
> - the older ISA bus. The EISA bus saw limited use between 1988 and
> - 1995 when it was made obsolete by the PCI bus.
> -
> - Say Y here if you are building a kernel for an EISA-based machine.
> -
> - Otherwise, say N.
> -
> config SBUS
> bool
>
> --
> 2.19.1
>
--
Best Regards
Masahiro Yamada