2019-01-21 15:55:47

by Stefan Agner

Subject: [PATCH] ARM: dts: colibri: use valid range configuration for weim

A valid WEIM range configuration must specify range entries for
all four chip selects. This fixes an error on boot:
imx-weim: probe of 21b8000.weim failed with error -22

Signed-off-by: Stefan Agner <[email protected]>
---
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index f7bcc1181c4a..5ee2ddedd038 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -238,10 +238,11 @@
&weim {
status = "okay";

- /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */
+ /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
ranges = <0 0 0x08000000 0x02000000
1 0 0x0a000000 0x02000000
- 2 0 0x0c000000 0x02000000>;
+ 2 0 0x0c000000 0x02000000
+ 3 0 0x0e000000 0x02000000>;

/* SRAM on Colibri nEXT_CS0 */
sram@0,0 {
--
2.20.1

2019-01-22 06:03:43

by Shawn Guo

Subject: Re: [PATCH] ARM: dts: colibri: use valid range configuration for weim

On Mon, Jan 21, 2019 at 04:53:27PM +0100, Stefan Agner wrote:
> A valid WEIM range configuration must specify range entries for
> all four chip selects. This fixes an error on boot:
> imx-weim: probe of 21b8000.weim failed with error -22
>
> Signed-off-by: Stefan Agner <[email protected]>

Applied, thanks.