commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback") skips data resets during tuning operation. Because of this,
a data error or data finish interrupt might still arrive after a command
error has been handled and the mrq ended. This ends up with a "mmc0: Got
data interrupt 0x00000002 even though no data operation was in progress"
error message.
Fix this by adding a platform specific callback for sdhci_irq. Mark the
mrq as a failure but wait for a data interrupt instead of calling
finish_mrq().
Fixes: 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback")
Signed-off-by: Faiz Abbas <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
---
Tested with 100 times boot tests on dra71x-evm, dra72x-evm and
dra7xx-evm.
v6:
Changed return value to u32 to fix the build warning.
v5:
Drop patch 1 and replace call to sdhci_finish_command() with
host->cmd = NULL
v4:
Fixed commit description for patch 1.
Added SDHCI_INT_TIMEOUT to CMD_ERR_MASK in patch 2.
v3:
Removed the command error specific callback and using the already
existing sdhci_irq callback instead. No measurable drop in performance.
v2:
Added EXPORT_SYMBOL_GPL for sdhci_cmd_err and sdhci_send_command to fix
errors when built as module.
drivers/mmc/host/sdhci-omap.c | 38 +++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 5bbed477c9b1..9f20fff9781b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -797,6 +797,43 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
sdhci_reset(host, mask);
}
+#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX |\
+ SDHCI_INT_TIMEOUT)
+#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
+
+static u32 sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ if (omap_host->is_tuning && host->cmd && !host->data_early &&
+ (intmask & CMD_ERR_MASK)) {
+
+ /*
+ * Since we are not resetting data lines during tuning
+ * operation, data error or data complete interrupts
+ * might still arrive. Mark this request as a failure
+ * but still wait for the data interrupt
+ */
+ if (intmask & SDHCI_INT_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->cmd->error = -EILSEQ;
+
+ host->cmd = NULL;
+
+ /*
+ * Sometimes command error interrupts and command complete
+ * interrupt will arrive together. Clear all command related
+ * interrupts here.
+ */
+ sdhci_writel(host, intmask & CMD_MASK, SDHCI_INT_STATUS);
+ intmask &= ~CMD_MASK;
+ }
+
+ return intmask;
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -807,6 +844,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
.reset = sdhci_omap_reset,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
+ .irq = sdhci_omap_irq,
};
static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
--
2.19.2
On Thu, 11 Apr 2019 at 11:00, Faiz Abbas <[email protected]> wrote:
>
> commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
> callback") skips data resets during tuning operation. Because of this,
> a data error or data finish interrupt might still arrive after a command
> error has been handled and the mrq ended. This ends up with a "mmc0: Got
> data interrupt 0x00000002 even though no data operation was in progress"
> error message.
>
> Fix this by adding a platform specific callback for sdhci_irq. Mark the
> mrq as a failure but wait for a data interrupt instead of calling
> finish_mrq().
>
> Fixes: 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
> callback")
> Signed-off-by: Faiz Abbas <[email protected]>
> Acked-by: Adrian Hunter <[email protected]>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> ---
>
> Tested with 100 times boot tests on dra71x-evm, dra72x-evm and
> dra7xx-evm.
>
> v6:
> Changed return value to u32 to fix the build warning.
>
> v5:
> Drop patch 1 and replace call to sdhci_finish_command() with
> host->cmd = NULL
>
> v4:
> Fixed commit description for patch 1.
> Added SDHCI_INT_TIMEOUT to CMD_ERR_MASK in patch 2.
>
> v3:
> Removed the command error specific callback and using the already
> existing sdhci_irq callback instead. No measurable drop in performance.
>
> v2:
> Added EXPORT_SYMBOL_GPL for sdhci_cmd_err and sdhci_send_command to fix
> errors when built as module.
>
> drivers/mmc/host/sdhci-omap.c | 38 +++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 5bbed477c9b1..9f20fff9781b 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -797,6 +797,43 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
> sdhci_reset(host, mask);
> }
>
> +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX |\
> + SDHCI_INT_TIMEOUT)
> +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
> +
> +static u32 sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> +
> + if (omap_host->is_tuning && host->cmd && !host->data_early &&
> + (intmask & CMD_ERR_MASK)) {
> +
> + /*
> + * Since we are not resetting data lines during tuning
> + * operation, data error or data complete interrupts
> + * might still arrive. Mark this request as a failure
> + * but still wait for the data interrupt
> + */
> + if (intmask & SDHCI_INT_TIMEOUT)
> + host->cmd->error = -ETIMEDOUT;
> + else
> + host->cmd->error = -EILSEQ;
> +
> + host->cmd = NULL;
> +
> + /*
> + * Sometimes command error interrupts and command complete
> + * interrupt will arrive together. Clear all command related
> + * interrupts here.
> + */
> + sdhci_writel(host, intmask & CMD_MASK, SDHCI_INT_STATUS);
> + intmask &= ~CMD_MASK;
> + }
> +
> + return intmask;
> +}
> +
> static struct sdhci_ops sdhci_omap_ops = {
> .set_clock = sdhci_omap_set_clock,
> .set_power = sdhci_omap_set_power,
> @@ -807,6 +844,7 @@ static struct sdhci_ops sdhci_omap_ops = {
> .platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
> .reset = sdhci_omap_reset,
> .set_uhs_signaling = sdhci_omap_set_uhs_signaling,
> + .irq = sdhci_omap_irq,
> };
>
> static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
> --
> 2.19.2
>