From: Helen Koike <[email protected]>
[ Upstream commit 544e784188f1dd7c797c70b213385e67d92005b6 ]
Raspberry pi board model B revison 2 have the hot plug detector gpio
active high (and not low as it was in the dts).
Signed-off-by: Helen Koike <[email protected]>
Fixes: 49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree.")
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 5641d162dfdb..28e7513ce617 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -93,7 +93,7 @@
};
&hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
&pwm {
--
2.19.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit 7221b727f0079a32aca91f657141e1de564d4b97 ]
The ucast IP table is utilized by some of the L3-specific sysfs attributes
that qeth_l3_create_device_attributes() provides. So initialize the table
_before_ registering the attributes.
Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/s390/net/qeth_l3_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 7f71ca0d08e7..9c5e801b3f6c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2586,12 +2586,14 @@ static int qeth_l3_probe_device(struct ccwgroup_device *gdev)
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
int rc;
+ hash_init(card->ip_htable);
+
if (gdev->dev.type == &qeth_generic_devtype) {
rc = qeth_l3_create_device_attributes(&gdev->dev);
if (rc)
return rc;
}
- hash_init(card->ip_htable);
+
hash_init(card->ip_mc_htable);
card->options.layer2 = 0;
card->info.hwtrap = 0;
--
2.19.1
From: Lukas Wunner <[email protected]>
[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ]
The ks8851 driver currently requests the IRQ before registering the
net_device. Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present. Most other drivers delay
requesting the IRQ until the net_device is opened. Do the same.
The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.
Signed-off-by: Lukas Wunner <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Tristram Ha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/micrel/ks8851.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 1633fa5c709c..c9faec4c5b25 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -785,6 +785,15 @@ static void ks8851_tx_work(struct work_struct *work)
static int ks8851_net_open(struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
+ int ret;
+
+ ret = request_threaded_irq(dev->irq, NULL, ks8851_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ dev->name, ks);
+ if (ret < 0) {
+ netdev_err(dev, "failed to get irq\n");
+ return ret;
+ }
/* lock the card, even if we may not actually be doing anything
* else at the moment */
@@ -899,6 +908,8 @@ static int ks8851_net_stop(struct net_device *dev)
dev_kfree_skb(txb);
}
+ free_irq(dev->irq, ks);
+
return 0;
}
@@ -1529,14 +1540,6 @@ static int ks8851_probe(struct spi_device *spi)
ks8851_read_selftest(ks);
ks8851_init_mac(ks);
- ret = request_threaded_irq(spi->irq, NULL, ks8851_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- ndev->name, ks);
- if (ret < 0) {
- dev_err(&spi->dev, "failed to get irq\n");
- goto err_irq;
- }
-
ret = register_netdev(ndev);
if (ret) {
dev_err(&spi->dev, "failed to register network device\n");
@@ -1549,11 +1552,7 @@ static int ks8851_probe(struct spi_device *spi)
return 0;
-
err_netdev:
- free_irq(ndev->irq, ks);
-
-err_irq:
err_id:
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
@@ -1574,7 +1573,6 @@ static int ks8851_remove(struct spi_device *spi)
dev_info(&spi->dev, "remove\n");
unregister_netdev(priv->netdev);
- free_irq(spi->irq, priv);
if (gpio_is_valid(priv->gpio))
gpio_set_value(priv->gpio, 0);
regulator_disable(priv->vdd_reg);
--
2.19.1
From: Dave Carroll <[email protected]>
[ Upstream commit b6554cfe09e1f610aed7d57164ab7760be57acd9 ]
There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors
Signed-off-by: Dave Carroll <[email protected]>
Reviewed-by: Sagar Biradar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/scsi/aacraid/aacraid.h | 7 ++++++-
drivers/scsi/aacraid/commsup.c | 4 ++--
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 39eb415987fc..074760f21014 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2639,9 +2639,14 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
return capacity;
}
+static inline int aac_pci_offline(struct aac_dev *dev)
+{
+ return pci_channel_offline(dev->pdev) || dev->handle_pci_error;
+}
+
static inline int aac_adapter_check_health(struct aac_dev *dev)
{
- if (unlikely(pci_channel_offline(dev->pdev)))
+ if (unlikely(aac_pci_offline(dev)))
return -1;
return (dev)->a_ops.adapter_check_health(dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 3236240a4edd..b7588de4484e 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -673,7 +673,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
return -ETIMEDOUT;
}
- if (unlikely(pci_channel_offline(dev->pdev)))
+ if (unlikely(aac_pci_offline(dev)))
return -EFAULT;
if ((blink = aac_adapter_check_health(dev)) > 0) {
@@ -773,7 +773,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
spin_unlock_irqrestore(&fibptr->event_lock, flags);
- if (unlikely(pci_channel_offline(dev->pdev)))
+ if (unlikely(aac_pci_offline(dev)))
return -EFAULT;
fibptr->flags |= FIB_CONTEXT_FLAG_WAIT;
--
2.19.1
From: Marc Zyngier <[email protected]>
[ Upstream commit ebff0b0e3d3c862c16c487959db5e0d879632559 ]
We've become very cautious to now always reset the vcpu when nothing
is loaded on the physical CPU. To do so, we now disable preemption
and do a kvm_arch_vcpu_put() to make sure we have all the state
in memory (and that it won't be loaded behind out back).
This now causes issues with resetting the PMU, which calls into perf.
Perf itself uses mutexes, which clashes with the lack of preemption.
It is worth realizing that the PMU is fully emulated, and that
no PMU state is ever loaded on the physical CPU. This means we can
perfectly reset the PMU outside of the non-preemptible section.
Fixes: e761a927bc9a ("KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded")
Reported-by: Julien Grall <[email protected]>
Tested-by: Julien Grall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm64/kvm/reset.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 18b9a522a2b3..0688816f19e2 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -117,6 +117,9 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
int ret = -EINVAL;
bool loaded;
+ /* Reset PMU outside of the non-preemptible section */
+ kvm_pmu_vcpu_reset(vcpu);
+
preempt_disable();
loaded = (vcpu->cpu != -1);
if (loaded)
@@ -164,9 +167,6 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
vcpu->arch.reset_state.reset = false;
}
- /* Reset PMU */
- kvm_pmu_vcpu_reset(vcpu);
-
/* Default workaround setup is enabled (if supported) */
if (kvm_arm_have_ssbd() == KVM_SSBD_KERNEL)
vcpu->arch.workaround_flags |= VCPU_WORKAROUND_2_FLAG;
--
2.19.1
From: Mukesh Ojha <[email protected]>
[ Upstream commit f276e002793cdb820862e8ea8f76769d56bba575 ]
if platform_driver_register fails, cleanup the allocated resource
gracefully.
Signed-off-by: Mukesh Ojha <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/host/u132-hcd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 5b8a3d9530c4..5cac83aaeac3 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3202,6 +3202,9 @@ static int __init u132_hcd_init(void)
printk(KERN_INFO "driver %s\n", hcd_name);
workqueue = create_singlethread_workqueue("u132");
retval = platform_driver_register(&u132_platform_driver);
+ if (retval)
+ destroy_workqueue(workqueue);
+
return retval;
}
--
2.19.1
From: Felipe Balbi <[email protected]>
[ Upstream commit 7ae622c978db6b2e28b4fced6ecd2a174492059d ]
This patch simply adds a new PCI Device ID
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/dwc3/dwc3-pci.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index fdc6e4e403e8..8cced3609e24 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -29,6 +29,7 @@
#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
+#define PCI_DEVICE_ID_INTEL_CMLH 0x02ee
#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee
#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e
@@ -305,6 +306,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
(kernel_ulong_t) &dwc3_pci_mrfld_properties, },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLH),
+ (kernel_ulong_t) &dwc3_pci_intel_properties, },
+
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTLP),
(kernel_ulong_t) &dwc3_pci_intel_properties, },
--
2.19.1
From: Marco Felsch <[email protected]>
[ Upstream commit 032f85c9360fb1a08385c584c2c4ed114b33c260 ]
Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):
Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
small percentage of modules have 'transmission timeouts' errors like
barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
eth0: 1000Mbps full duplex link detected
eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
Cc: Stefan Christ <[email protected]>
Cc: Christian Hemp <[email protected]>
Signed-off-by: Marco Felsch <[email protected]>
Fixes: 3180f956668e ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index ed1aafd56973..fe4e89d773f5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -89,6 +89,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ phy-reset-duration = <10>; /* in msecs */
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
--
2.19.1
From: Maxim Zhukov <[email protected]>
[ Upstream commit 90cd9bed5adb3e3bd4d3ac4cbcecbc4a8028bbaf ]
Add depends on PCI for PCI_MT7621
Signed-off-by: Maxim Zhukov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/mt7621-pci/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/mt7621-pci/Kconfig b/drivers/staging/mt7621-pci/Kconfig
index d33533872a16..c8fa17cfa807 100644
--- a/drivers/staging/mt7621-pci/Kconfig
+++ b/drivers/staging/mt7621-pci/Kconfig
@@ -1,6 +1,7 @@
config PCI_MT7621
tristate "MediaTek MT7621 PCI Controller"
depends on RALINK
+ depends on PCI
select PCI_DRIVERS_GENERIC
help
This selects a driver for the MediaTek MT7621 PCI Controller.
--
2.19.1
From: Li RongQing <[email protected]>
[ Upstream commit 19b39a25388e71390e059906c979f87be4ef0c71 ]
genlmsg_reply can fail, so propagate its return code
Signed-off-by: Li RongQing <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ieee802154/mac802154_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
index 624bff4d3636..f1ed1744801c 100644
--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -332,7 +332,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
goto out_err;
}
- genlmsg_reply(skb, info);
+ res = genlmsg_reply(skb, info);
break;
}
--
2.19.1
From: Aditya Pakki <[email protected]>
[ Upstream commit 5bf7295fe34a5251b1d241b9736af4697b590670 ]
netdev_alloc_skb can fail and return a NULL pointer which is
dereferenced without a check. The patch avoids such a scenario.
Signed-off-by: Aditya Pakki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 3b0adda7cc9c..a4cd6f2cfb86 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1048,6 +1048,8 @@ int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode)
for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+ if (!skb)
+ break;
qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
skb_put(skb, QLCNIC_ILB_PKT_SIZE);
adapter->ahw->diag_cnt = 0;
--
2.19.1
From: Lukas Wunner <[email protected]>
[ Upstream commit 536d3680fd2dab5c39857d62a3e084198fc74ff9 ]
The ks8851 driver lets the chip auto-dequeue received packets once they
have been read in full. It achieves that by setting the ADRFE flag in
the RXQCR register ("Auto-Dequeue RXQ Frame Enable").
However if allocation of a packet's socket buffer or retrieval of the
packet over the SPI bus fails, the packet will not have been read in
full and is not auto-dequeued. Such partial retrieval of a packet
confuses the chip's RX queue management: On the next RX interrupt,
the first packet read from the queue will be the one left there
previously and this one can be retrieved without issues. But for any
newly received packets, the frame header status and byte count registers
(RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval.
The chip allows explicitly dequeueing a packet from the RX queue by
setting the RRXEF flag in the RXQCR register ("Release RX Error Frame").
This could be used to dequeue the packet in case of an error, but if
that error is a failed SPI transfer, it is unknown if the packet was
transferred in full and was auto-dequeued or if it was only transferred
in part and requires an explicit dequeue. The safest approach is thus
to always dequeue packets explicitly and forgo auto-dequeueing.
Without this change, I've witnessed packet retrieval break completely
when an SPI DMA transfer fails, requiring a chip reset. Explicit
dequeueing magically fixes this and makes packet retrieval absolutely
robust for me.
The chip's documentation suggests auto-dequeuing and uses the RRXEF
flag only to dequeue error frames which the driver doesn't want to
retrieve. But that seems to be a fair-weather approach.
Signed-off-by: Lukas Wunner <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Tristram Ha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/micrel/ks8851.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index bd6e9014bc74..a93f8e842c07 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -535,9 +535,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
/* set dma read address */
ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
- /* start the packet dma process, and set auto-dequeue rx */
- ks8851_wrreg16(ks, KS_RXQCR,
- ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+ /* start DMA access */
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
if (rxlen > 4) {
unsigned int rxalign;
@@ -568,7 +567,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
}
}
- ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ /* end DMA access and dequeue packet */
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_RRXEF);
}
}
--
2.19.1
From: Aditya Pakki <[email protected]>
[ Upstream commit d70d70aec9632679dd00dcc1b1e8b2517e2c7da0 ]
skb allocated via dev_alloc_skb can fail and return a NULL pointer.
This patch avoids such a scenario and returns, consistent with other
invocations.
Signed-off-by: Aditya Pakki <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/rtlwifi/rtl8822be/fw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/rtlwifi/rtl8822be/fw.c b/drivers/staging/rtlwifi/rtl8822be/fw.c
index a40396614814..c1ed52df05f0 100644
--- a/drivers/staging/rtlwifi/rtl8822be/fw.c
+++ b/drivers/staging/rtlwifi/rtl8822be/fw.c
@@ -741,6 +741,8 @@ void rtl8822be_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
u1_rsvd_page_loc, 3);
skb = dev_alloc_skb(totalpacketlen);
+ if (!skb)
+ return;
memcpy((u8 *)skb_put(skb, totalpacketlen), &reserved_page_packet,
totalpacketlen);
--
2.19.1
From: Aditya Pakki <[email protected]>
[ Upstream commit 7671ce0d92933762f469266daf43bd34d422d58c ]
hwxmits is allocated via kcalloc and not checked for failure before its
dereference. The patch fixes this problem by returning error upstream
in rtl8723bs, rtl8188eu.
Signed-off-by: Aditya Pakki <[email protected]>
Acked-by: Mukesh Ojha <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/rtl8188eu/core/rtw_xmit.c | 9 +++++++--
drivers/staging/rtl8188eu/include/rtw_xmit.h | 2 +-
drivers/staging/rtl8723bs/core/rtw_xmit.c | 14 +++++++-------
drivers/staging/rtl8723bs/include/rtw_xmit.h | 2 +-
4 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 2130d78e0d9f..dd9b02d316f3 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -178,7 +178,9 @@ s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter)
pxmitpriv->free_xmit_extbuf_cnt = num_xmit_extbuf;
- rtw_alloc_hwxmits(padapter);
+ res = rtw_alloc_hwxmits(padapter);
+ if (res == _FAIL)
+ goto exit;
rtw_init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
for (i = 0; i < 4; i++)
@@ -1502,7 +1504,7 @@ s32 rtw_xmit_classifier(struct adapter *padapter, struct xmit_frame *pxmitframe)
return res;
}
-void rtw_alloc_hwxmits(struct adapter *padapter)
+s32 rtw_alloc_hwxmits(struct adapter *padapter)
{
struct hw_xmit *hwxmits;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
@@ -1511,6 +1513,8 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
pxmitpriv->hwxmits = kcalloc(pxmitpriv->hwxmit_entry,
sizeof(struct hw_xmit), GFP_KERNEL);
+ if (!pxmitpriv->hwxmits)
+ return _FAIL;
hwxmits = pxmitpriv->hwxmits;
@@ -1518,6 +1522,7 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
hwxmits[1] .sta_queue = &pxmitpriv->vi_pending;
hwxmits[2] .sta_queue = &pxmitpriv->be_pending;
hwxmits[3] .sta_queue = &pxmitpriv->bk_pending;
+ return _SUCCESS;
}
void rtw_free_hwxmits(struct adapter *padapter)
diff --git a/drivers/staging/rtl8188eu/include/rtw_xmit.h b/drivers/staging/rtl8188eu/include/rtw_xmit.h
index 788f59c74ea1..ba7e15fbde72 100644
--- a/drivers/staging/rtl8188eu/include/rtw_xmit.h
+++ b/drivers/staging/rtl8188eu/include/rtw_xmit.h
@@ -336,7 +336,7 @@ s32 rtw_txframes_sta_ac_pending(struct adapter *padapter,
void rtw_init_hwxmits(struct hw_xmit *phwxmit, int entry);
s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter);
void _rtw_free_xmit_priv(struct xmit_priv *pxmitpriv);
-void rtw_alloc_hwxmits(struct adapter *padapter);
+s32 rtw_alloc_hwxmits(struct adapter *padapter);
void rtw_free_hwxmits(struct adapter *padapter);
s32 rtw_xmit(struct adapter *padapter, struct sk_buff **pkt);
diff --git a/drivers/staging/rtl8723bs/core/rtw_xmit.c b/drivers/staging/rtl8723bs/core/rtw_xmit.c
index edb678190b4b..16291de5c0d9 100644
--- a/drivers/staging/rtl8723bs/core/rtw_xmit.c
+++ b/drivers/staging/rtl8723bs/core/rtw_xmit.c
@@ -260,7 +260,9 @@ s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter)
}
}
- rtw_alloc_hwxmits(padapter);
+ res = rtw_alloc_hwxmits(padapter);
+ if (res == _FAIL)
+ goto exit;
rtw_init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
for (i = 0; i < 4; i++) {
@@ -2144,7 +2146,7 @@ s32 rtw_xmit_classifier(struct adapter *padapter, struct xmit_frame *pxmitframe)
return res;
}
-void rtw_alloc_hwxmits(struct adapter *padapter)
+s32 rtw_alloc_hwxmits(struct adapter *padapter)
{
struct hw_xmit *hwxmits;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
@@ -2155,10 +2157,8 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
pxmitpriv->hwxmits = rtw_zmalloc(sizeof(struct hw_xmit) * pxmitpriv->hwxmit_entry);
- if (pxmitpriv->hwxmits == NULL) {
- DBG_871X("alloc hwxmits fail!...\n");
- return;
- }
+ if (!pxmitpriv->hwxmits)
+ return _FAIL;
hwxmits = pxmitpriv->hwxmits;
@@ -2204,7 +2204,7 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
}
-
+ return _SUCCESS;
}
void rtw_free_hwxmits(struct adapter *padapter)
diff --git a/drivers/staging/rtl8723bs/include/rtw_xmit.h b/drivers/staging/rtl8723bs/include/rtw_xmit.h
index a75b668d09a6..021c72361fbb 100644
--- a/drivers/staging/rtl8723bs/include/rtw_xmit.h
+++ b/drivers/staging/rtl8723bs/include/rtw_xmit.h
@@ -486,7 +486,7 @@ s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter);
void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv);
-void rtw_alloc_hwxmits(struct adapter *padapter);
+s32 rtw_alloc_hwxmits(struct adapter *padapter);
void rtw_free_hwxmits(struct adapter *padapter);
--
2.19.1
From: Davide Caratti <[email protected]>
[ Upstream commit fe384e2fa36ca084a456fd30558cccc75b4b3fbd ]
callers of tcf_gact_goto_chain_index() can potentially read an old value
of the chain index, or even dereference a NULL 'goto_chain' pointer,
because 'goto_chain' and 'tcfa_action' are read in the traffic path
without caring of concurrent write in the control path. The most recent
value of chain index can be read also from a->tcfa_action (it's encoded
there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to
dereference 'goto_chain': just read the chain id from the control action.
Fixes: e457d86ada27 ("net: sched: add couple of goto_chain helpers")
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
include/net/tc_act/tc_gact.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/tc_act/tc_gact.h b/include/net/tc_act/tc_gact.h
index ef8dd0db70ce..56935bf027a7 100644
--- a/include/net/tc_act/tc_gact.h
+++ b/include/net/tc_act/tc_gact.h
@@ -56,7 +56,7 @@ static inline bool is_tcf_gact_goto_chain(const struct tc_action *a)
static inline u32 tcf_gact_goto_chain_index(const struct tc_action *a)
{
- return a->goto_chain->index;
+ return READ_ONCE(a->tcfa_action) & TC_ACT_EXT_VAL_MASK;
}
#endif /* __NET_TC_GACT_H */
--
2.19.1
From: Wen Yang <[email protected]>
[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ]
The call to ehea_get_eth_dn returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <[email protected]>
Cc: Douglas Miller <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/ibm/ehea/ehea_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 03f64f40b2a3..506f78322d74 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -3161,6 +3161,7 @@ static ssize_t ehea_probe_port(struct device *dev,
if (ehea_add_adapter_mr(adapter)) {
pr_err("creating MR failed\n");
+ of_node_put(eth_dn);
return -EIO;
}
--
2.19.1
From: Noralf Trønnes <[email protected]>
[ Upstream commit 3f04e0a6cfebf48152ac64502346cdc258811f79 ]
If userspace has open fd(s) when drm_dev_unplug() is run, it will result
in drm_dev_unregister() being called twice. First in drm_dev_unplug() and
then later in drm_release() through the call to drm_put_dev().
Since userspace already holds a ref on drm_device through the drm_minor,
it's not necessary to add extra ref counting based on no open file
handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug().
We now have this:
- Userpace holds a ref on drm_device as long as there's open fd(s)
- The driver holds a ref on drm_device as long as it's bound to the
struct device
When both sides are done with drm_device, it is released.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpu/drm/drm_drv.c | 6 +-----
drivers/gpu/drm/drm_file.c | 6 ++----
2 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index ea4941da9b27..0201ccb22f4c 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -381,11 +381,7 @@ void drm_dev_unplug(struct drm_device *dev)
synchronize_srcu(&drm_unplug_srcu);
drm_dev_unregister(dev);
-
- mutex_lock(&drm_global_mutex);
- if (dev->open_count == 0)
- drm_dev_put(dev);
- mutex_unlock(&drm_global_mutex);
+ drm_dev_put(dev);
}
EXPORT_SYMBOL(drm_dev_unplug);
diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
index ffa8dc35515f..e4ccb52c67ea 100644
--- a/drivers/gpu/drm/drm_file.c
+++ b/drivers/gpu/drm/drm_file.c
@@ -479,11 +479,9 @@ int drm_release(struct inode *inode, struct file *filp)
drm_file_free(file_priv);
- if (!--dev->open_count) {
+ if (!--dev->open_count)
drm_lastclose(dev);
- if (drm_dev_is_unplugged(dev))
- drm_put_dev(dev);
- }
+
mutex_unlock(&drm_global_mutex);
drm_minor_release(minor);
--
2.19.1
From: Jean-Philippe Brucker <[email protected]>
[ Upstream commit 776e78677f514ecddd12dba48b9040958999bd5a ]
meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:
[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
...
[ 5194.788850] Call trace:
[ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm]
Retrieve the right pointer in meson_drv_unbind().
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 611ac340fb28..4a72fa53a1d5 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -317,8 +317,8 @@ static int meson_drv_bind(struct device *dev)
static void meson_drv_unbind(struct device *dev)
{
- struct drm_device *drm = dev_get_drvdata(dev);
- struct meson_drm *priv = drm->dev_private;
+ struct meson_drm *priv = dev_get_drvdata(dev);
+ struct drm_device *drm = priv->drm;
drm_dev_unregister(drm);
drm_kms_helper_poll_fini(drm);
--
2.19.1
From: Sekhar Nori <[email protected]>
[ Upstream commit 2dbed152e2d4c3fe2442284918d14797898b1e8a ]
allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.
Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cd4c74daf71e..51794c7fa6d5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -612,6 +612,7 @@ config ARCH_DAVINCI
select HAVE_IDE
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
+ select REGMAP_MMIO
select RESET_CONTROLLER
select USE_OF
select ZONE_DMA
--
2.19.1
From: Kangjie Lu <[email protected]>
[ Upstream commit 6d65561f3d5ec933151939c543d006b79044e7a6 ]
skb_header_pointer may return NULL. The current code dereference
its return values without a NULL check.
The fix inserts the checks to avoid NULL pointer dereferences.
Fixes: 202a8ff545cc ("netfilter: add IPv6 segment routing header 'srh' match")
Signed-off-by: Kangjie Lu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/ipv6/netfilter/ip6t_srh.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/ipv6/netfilter/ip6t_srh.c b/net/ipv6/netfilter/ip6t_srh.c
index 1059894a6f4c..4cb83fb69844 100644
--- a/net/ipv6/netfilter/ip6t_srh.c
+++ b/net/ipv6/netfilter/ip6t_srh.c
@@ -210,6 +210,8 @@ static bool srh1_mt6(const struct sk_buff *skb, struct xt_action_param *par)
psidoff = srhoff + sizeof(struct ipv6_sr_hdr) +
((srh->segments_left + 1) * sizeof(struct in6_addr));
psid = skb_header_pointer(skb, psidoff, sizeof(_psid), &_psid);
+ if (!psid)
+ return false;
if (NF_SRH_INVF(srhinfo, IP6T_SRH_INV_PSID,
ipv6_masked_addr_cmp(psid, &srhinfo->psid_msk,
&srhinfo->psid_addr)))
@@ -223,6 +225,8 @@ static bool srh1_mt6(const struct sk_buff *skb, struct xt_action_param *par)
nsidoff = srhoff + sizeof(struct ipv6_sr_hdr) +
((srh->segments_left - 1) * sizeof(struct in6_addr));
nsid = skb_header_pointer(skb, nsidoff, sizeof(_nsid), &_nsid);
+ if (!nsid)
+ return false;
if (NF_SRH_INVF(srhinfo, IP6T_SRH_INV_NSID,
ipv6_masked_addr_cmp(nsid, &srhinfo->nsid_msk,
&srhinfo->nsid_addr)))
@@ -233,6 +237,8 @@ static bool srh1_mt6(const struct sk_buff *skb, struct xt_action_param *par)
if (srhinfo->mt_flags & IP6T_SRH_LSID) {
lsidoff = srhoff + sizeof(struct ipv6_sr_hdr);
lsid = skb_header_pointer(skb, lsidoff, sizeof(_lsid), &_lsid);
+ if (!lsid)
+ return false;
if (NF_SRH_INVF(srhinfo, IP6T_SRH_INV_LSID,
ipv6_masked_addr_cmp(lsid, &srhinfo->lsid_msk,
&srhinfo->lsid_addr)))
--
2.19.1
From: Guido Kiener <[email protected]>
[ Upstream commit f1d3fba17cd4eeea20397f1324b7b9c69a6a935c ]
When a request must be dequeued with net2280_dequeue() e.g. due
to a device clear action and the same request is finished by the
function scan_dma_completions() then the function net2280_dequeue()
does not find the request in the following search loop and
returns the error -EINVAL without restoring the status ep->stopped.
Thus the endpoint keeps blocked and does not receive any data
anymore.
This fix restores the status and does not issue an error message.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Guido Kiener <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/gadget/udc/net2280.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index c57046b1da0e..ee872cad5270 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1273,9 +1273,9 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
break;
}
if (&req->req != _req) {
+ ep->stopped = stopped;
spin_unlock_irqrestore(&ep->dev->lock, flags);
- dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n",
- __func__);
+ ep_dbg(ep->dev, "%s: Request mismatch\n", __func__);
return -EINVAL;
}
--
2.19.1
From: Steffen Maier <[email protected]>
[ Upstream commit c8206579175c34a2546de8a74262456278a7795a ]
If an incoming ELS of type RSCN contains more than one element, zfcp
suboptimally causes repeated erp trigger NOP trace records for each
previously failed port. These could be ports that went away. It loops over
each RSCN element, and for each of those in an inner loop over all
zfcp_ports.
The trigger to recover failed ports should be just the reception of some
RSCN, no matter how many elements it has. So we can loop over failed ports
separately, and only then loop over each RSCN element to handle the
non-failed ports.
The call chain was:
zfcp_fc_incoming_rscn
for (i = 1; i < no_entries; i++)
_zfcp_fc_incoming_rscn
list_for_each_entry(port, &adapter->port_list, list)
if (masked port->d_id match) zfcp_fc_test_link
if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <===
In order the reduce the "flooding" of the REC trace area in such cases, we
factor out handling the failed ports to be outside of the entries loop:
zfcp_fc_incoming_rscn
if (no_entries > 1) <===
list_for_each_entry(port, &adapter->port_list, list) <===
if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <===
for (i = 1; i < no_entries; i++)
_zfcp_fc_incoming_rscn
list_for_each_entry(port, &adapter->port_list, list)
if (masked port->d_id match) zfcp_fc_test_link
Abbreviated example trace records before this code change:
Tag : fcrscn1
WWPN : 0x500507630310d327
ERP want : 0x02
ERP need : 0x02
Tag : fcrscn1
WWPN : 0x500507630310d327
ERP want : 0x02
ERP need : 0x00 NOP => superfluous trace record
The last trace entry repeats if there are more than 2 RSCN elements.
Signed-off-by: Steffen Maier <[email protected]>
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Jens Remus <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/s390/scsi/zfcp_fc.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index f6c415d6ef48..5eb7aabe2d8b 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -239,10 +239,6 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
list_for_each_entry(port, &adapter->port_list, list) {
if ((port->d_id & range) == (ntoh24(page->rscn_fid) & range))
zfcp_fc_test_link(port);
- if (!port->d_id)
- zfcp_erp_port_reopen(port,
- ZFCP_STATUS_COMMON_ERP_FAILED,
- "fcrscn1");
}
read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
@@ -250,6 +246,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
static void zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req)
{
struct fsf_status_read_buffer *status_buffer = (void *)fsf_req->data;
+ struct zfcp_adapter *adapter = fsf_req->adapter;
struct fc_els_rscn *head;
struct fc_els_rscn_page *page;
u16 i;
@@ -263,6 +260,22 @@ static void zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req)
no_entries = be16_to_cpu(head->rscn_plen) /
sizeof(struct fc_els_rscn_page);
+ if (no_entries > 1) {
+ /* handle failed ports */
+ unsigned long flags;
+ struct zfcp_port *port;
+
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list) {
+ if (port->d_id)
+ continue;
+ zfcp_erp_port_reopen(port,
+ ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcrscn1");
+ }
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
+ }
+
for (i = 1; i < no_entries; i++) {
/* skip head and start with 1st element */
page++;
--
2.19.1
From: Ralph Campbell <[email protected]>
[ Upstream commit 92c77f7c4d5dfaaf45b2ce19360e69977c264766 ]
valid_phys_addr_range() is used to sanity check the physical address range
of an operation, e.g., access to /dev/mem. It uses __pa(high_memory)
internally.
If memory is populated at the end of the physical address space, then
__pa(high_memory) is outside of the physical address space because:
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
For the comparison in valid_phys_addr_range() this is not an issue, but if
CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which
verifies that the resulting physical address is within the valid physical
address space of the CPU. So in the case that memory is populated at the
end of the physical address space, this is not true and triggers a
VIRTUAL_BUG_ON().
Use __pa(high_memory - 1) to prevent the conversion from going beyond
the end of valid physical addresses.
Fixes: be62a3204406 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
Signed-off-by: Ralph Campbell <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Craig Bergstrom <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sander Eikelenboom <[email protected]>
Cc: Sean Young <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/x86/mm/mmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 1e95d57760cf..b69f7d428443 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -230,7 +230,7 @@ bool mmap_address_hint_valid(unsigned long addr, unsigned long len)
/* Can we access it for direct reading/writing? Must be RAM: */
int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
- return addr + count <= __pa(high_memory);
+ return addr + count - 1 <= __pa(high_memory - 1);
}
/* Can we access it through mmap? Must be a valid physical address: */
--
2.19.1
From: Kangjie Lu <[email protected]>
[ Upstream commit fba1bdd2a9a93f3e2181ec1936a3c2f6b37e7ed6 ]
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <[email protected]>
Acked-by: Manish Rangankar <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/scsi/qla4xxx/ql4_os.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 575445c761b4..5dd3e4e01b10 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -3204,6 +3204,8 @@ static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
return -EINVAL;
ep = iscsi_lookup_endpoint(transport_fd);
+ if (!ep)
+ return -EINVAL;
conn = cls_conn->dd_data;
qla_conn = conn->dd_data;
qla_conn->qla_ep = ep->dd_data;
--
2.19.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit f7299d441a4da8a5088e651ea55023525a793a13 ]
If the call to of_gpiochip_scan_gpios() in of_gpiochip_add() fails, no
error handling is performed. This lead to the need of callers to call
of_gpiochip_remove() on failure, which causes "BAD of_node_put() on ..."
if the failure happened before the call to of_node_get().
Fix this by adding proper error handling.
Note that calling gpiochip_remove_pin_ranges() multiple times causes no
harm: subsequent calls are a no-op.
Fixes: dfbd379ba9b7431e ("gpio: of: Return error if gpio hog configuration failed")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpio/gpiolib-of.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index d4e7a09598fa..e0f149bdf98f 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -646,7 +646,13 @@ int of_gpiochip_add(struct gpio_chip *chip)
of_node_get(chip->of_node);
- return of_gpiochip_scan_gpios(chip);
+ status = of_gpiochip_scan_gpios(chip);
+ if (status) {
+ of_node_put(chip->of_node);
+ gpiochip_remove_pin_ranges(chip);
+ }
+
+ return status;
}
void of_gpiochip_remove(struct gpio_chip *chip)
--
2.19.1
From: Wei Li <[email protected]>
[ Upstream commit 977c7a6d1e263ff1d755f28595b99e4bc0c48a9f ]
Since commit 1fb87b8e9599 ("perf machine: Don't search for active kernel
start in __machine__create_kernel_maps"), the __machine__create_kernel_maps()
just create a map what start and end are both zero. Though the address will be
updated later, the order of map in the rbtree may be incorrect.
The commit ee05d21791db ("perf machine: Set main kernel end address properly")
fixed the logic in machine__create_kernel_maps(), but it's still wrong in
function machine__process_kernel_mmap_event().
To reproduce this issue, we need an environment which the module address
is before the kernel text segment. I tested it on an aarch64 machine with
kernel 4.19.25:
[root@localhost hulk]# grep _stext /proc/kallsyms
ffff000008081000 T _stext
[root@localhost hulk]# grep _etext /proc/kallsyms
ffff000009780000 R _etext
[root@localhost hulk]# tail /proc/modules
hisi_sas_v2_hw 77824 0 - Live 0xffff00000191d000
nvme_core 126976 7 nvme, Live 0xffff0000018b6000
mdio 20480 1 ixgbe, Live 0xffff0000018ab000
hisi_sas_main 106496 1 hisi_sas_v2_hw, Live 0xffff000001861000
hns_mdio 20480 2 - Live 0xffff000001822000
hnae 28672 3 hns_dsaf,hns_enet_drv, Live 0xffff000001815000
dm_mirror 40960 0 - Live 0xffff000001804000
dm_region_hash 32768 1 dm_mirror, Live 0xffff0000017f5000
dm_log 32768 2 dm_mirror,dm_region_hash, Live 0xffff0000017e7000
dm_mod 315392 17 dm_mirror,dm_log, Live 0xffff000001780000
[root@localhost hulk]#
Before fix:
[root@localhost bin]# perf record sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ]
[root@localhost bin]# perf buildid-list -i perf.data
4c4e46c971ca935f781e603a09b52a92e8bdfee8 [vdso]
[root@localhost bin]# perf buildid-list -i perf.data -H
0000000000000000000000000000000000000000 /proc/kcore
[root@localhost bin]#
After fix:
[root@localhost tools]# ./perf/perf record sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ]
[root@localhost tools]# ./perf/perf buildid-list -i perf.data
28a6c690262896dbd1b5e1011ed81623e6db0610 [kernel.kallsyms]
106c14ce6e4acea3453e484dc604d66666f08a2f [vdso]
[root@localhost tools]# ./perf/perf buildid-list -i perf.data -H
28a6c690262896dbd1b5e1011ed81623e6db0610 /proc/kcore
Signed-off-by: Wei Li <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Hanjun Guo <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Li Bin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
tools/perf/util/machine.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index b1508ce3e412..076718a7b3ea 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1358,6 +1358,20 @@ static void machine__set_kernel_mmap(struct machine *machine,
machine->vmlinux_map->end = ~0ULL;
}
+static void machine__update_kernel_mmap(struct machine *machine,
+ u64 start, u64 end)
+{
+ struct map *map = machine__kernel_map(machine);
+
+ map__get(map);
+ map_groups__remove(&machine->kmaps, map);
+
+ machine__set_kernel_mmap(machine, start, end);
+
+ map_groups__insert(&machine->kmaps, map);
+ map__put(map);
+}
+
int machine__create_kernel_maps(struct machine *machine)
{
struct dso *kernel = machine__get_kernel(machine);
@@ -1390,17 +1404,11 @@ int machine__create_kernel_maps(struct machine *machine)
goto out_put;
}
- /* we have a real start address now, so re-order the kmaps */
- map = machine__kernel_map(machine);
-
- map__get(map);
- map_groups__remove(&machine->kmaps, map);
-
- /* assume it's the last in the kmaps */
- machine__set_kernel_mmap(machine, addr, ~0ULL);
-
- map_groups__insert(&machine->kmaps, map);
- map__put(map);
+ /*
+ * we have a real start address now, so re-order the kmaps
+ * assume it's the last in the kmaps
+ */
+ machine__update_kernel_mmap(machine, addr, ~0ULL);
}
if (machine__create_extra_kernel_maps(machine, kernel))
@@ -1536,7 +1544,7 @@ static int machine__process_kernel_mmap_event(struct machine *machine,
if (strstr(kernel->long_name, "vmlinux"))
dso__set_short_name(kernel, "[kernel.vmlinux]", false);
- machine__set_kernel_mmap(machine, event->mmap.start,
+ machine__update_kernel_mmap(machine, event->mmap.start,
event->mmap.start + event->mmap.len);
/*
--
2.19.1
From: Kangjie Lu <[email protected]>
[ Upstream commit 0aab8e4df4702b31314a27ec4b0631dfad0fae0a ]
In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.
Fixes: fa4191a609f2 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/leds/leds-pca9532.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 7fea18b0c15d..7cb4d685a1f1 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -513,6 +513,7 @@ static int pca9532_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int devid;
+ const struct of_device_id *of_id;
struct pca9532_data *data = i2c_get_clientdata(client);
struct pca9532_platform_data *pca9532_pdata =
dev_get_platdata(&client->dev);
@@ -528,8 +529,11 @@ static int pca9532_probe(struct i2c_client *client,
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
- devid = (int)(uintptr_t)of_match_device(
- of_pca9532_leds_match, &client->dev)->data;
+ of_id = of_match_device(of_pca9532_leds_match,
+ &client->dev);
+ if (unlikely(!of_id))
+ return -EINVAL;
+ devid = (int)(uintptr_t) of_id->data;
} else {
devid = id->driver_data;
}
--
2.19.1
From: raymond pang <[email protected]>
[ Upstream commit dd08a8d9a66de4b54575c294a92630299f7e0fe7 ]
When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for
a stack virtual address. Stack DMA buffers must be avoided.
Signed-off-by: raymond pang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/ata/libata-zpodd.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index b3ed8f9953a8..173e6f2dd9af 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -52,38 +52,52 @@ static int eject_tray(struct ata_device *dev)
/* Per the spec, only slot type and drawer type ODD can be supported */
static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
{
- char buf[16];
+ char *buf;
unsigned int ret;
- struct rm_feature_desc *desc = (void *)(buf + 8);
+ struct rm_feature_desc *desc;
struct ata_taskfile tf;
static const char cdb[] = { GPCMD_GET_CONFIGURATION,
2, /* only 1 feature descriptor requested */
0, 3, /* 3, removable medium feature */
0, 0, 0,/* reserved */
- 0, sizeof(buf),
+ 0, 16,
0, 0, 0,
};
+ buf = kzalloc(16, GFP_KERNEL);
+ if (!buf)
+ return ODD_MECH_TYPE_UNSUPPORTED;
+ desc = (void *)(buf + 8);
+
ata_tf_init(dev, &tf);
tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.command = ATA_CMD_PACKET;
tf.protocol = ATAPI_PROT_PIO;
- tf.lbam = sizeof(buf);
+ tf.lbam = 16;
ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
- buf, sizeof(buf), 0);
- if (ret)
+ buf, 16, 0);
+ if (ret) {
+ kfree(buf);
return ODD_MECH_TYPE_UNSUPPORTED;
+ }
- if (be16_to_cpu(desc->feature_code) != 3)
+ if (be16_to_cpu(desc->feature_code) != 3) {
+ kfree(buf);
return ODD_MECH_TYPE_UNSUPPORTED;
+ }
- if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1)
+ if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) {
+ kfree(buf);
return ODD_MECH_TYPE_SLOT;
- else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1)
+ } else if (desc->mech_type == 1 && desc->load == 0 &&
+ desc->eject == 1) {
+ kfree(buf);
return ODD_MECH_TYPE_DRAWER;
- else
+ } else {
+ kfree(buf);
return ODD_MECH_TYPE_UNSUPPORTED;
+ }
}
/* Test if ODD is zero power ready by sense code */
--
2.19.1
From: Rasmus Villemoes <[email protected]>
[ Upstream commit 909346433064b8d840dc82af26161926b8d37558 ]
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
# cat device_name
# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/leds/trigger/ledtrig-netdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 167a94c02d05..136f86a1627d 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -122,7 +122,8 @@ static ssize_t device_name_store(struct device *dev,
trigger_data->net_dev = NULL;
}
- strncpy(trigger_data->device_name, buf, size);
+ memcpy(trigger_data->device_name, buf, size);
+ trigger_data->device_name[size] = 0;
if (size > 0 && trigger_data->device_name[size - 1] == '\n')
trigger_data->device_name[size - 1] = 0;
--
2.19.1
From: Joerg Roedel <[email protected]>
[ Upstream commit 8aafaaf2212192012f5bae305bb31cdf7681d777 ]
If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happened until now and can cause
data corruption on data transfered with these devices.
Treat exclusion ranges as reserved regions in the iommu-core
to fix the problem.
Fixes: be2a022c0dd0 ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices')
Signed-off-by: Joerg Roedel <[email protected]>
Reviewed-by: Gary R Hook <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/iommu/amd_iommu.c | 9 ++++++---
drivers/iommu/amd_iommu_init.c | 7 ++++---
drivers/iommu/amd_iommu_types.h | 2 ++
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 0b3877681e4a..8d9920ff4134 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3119,21 +3119,24 @@ static void amd_iommu_get_resv_regions(struct device *dev,
return;
list_for_each_entry(entry, &amd_iommu_unity_map, list) {
+ int type, prot = 0;
size_t length;
- int prot = 0;
if (devid < entry->devid_start || devid > entry->devid_end)
continue;
+ type = IOMMU_RESV_DIRECT;
length = entry->address_end - entry->address_start;
if (entry->prot & IOMMU_PROT_IR)
prot |= IOMMU_READ;
if (entry->prot & IOMMU_PROT_IW)
prot |= IOMMU_WRITE;
+ if (entry->prot & IOMMU_UNITY_MAP_FLAG_EXCL_RANGE)
+ /* Exclusion range */
+ type = IOMMU_RESV_RESERVED;
region = iommu_alloc_resv_region(entry->address_start,
- length, prot,
- IOMMU_RESV_DIRECT);
+ length, prot, type);
if (!region) {
pr_err("Out of memory allocating dm-regions for %s\n",
dev_name(dev));
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index e062ab9687c7..be3801d43d48 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2001,6 +2001,9 @@ static int __init init_unity_map_range(struct ivmd_header *m)
if (e == NULL)
return -ENOMEM;
+ if (m->flags & IVMD_FLAG_EXCL_RANGE)
+ init_exclusion_range(m);
+
switch (m->type) {
default:
kfree(e);
@@ -2047,9 +2050,7 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
while (p < end) {
m = (struct ivmd_header *)p;
- if (m->flags & IVMD_FLAG_EXCL_RANGE)
- init_exclusion_range(m);
- else if (m->flags & IVMD_FLAG_UNITY_MAP)
+ if (m->flags & (IVMD_FLAG_UNITY_MAP | IVMD_FLAG_EXCL_RANGE))
init_unity_map_range(m);
p += m->length;
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index e2b342e65a7b..69f3d4c95b53 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -373,6 +373,8 @@
#define IOMMU_PROT_IR 0x01
#define IOMMU_PROT_IW 0x02
+#define IOMMU_UNITY_MAP_FLAG_EXCL_RANGE (1 << 2)
+
/* IOMMU capabilities */
#define IOMMU_CAP_IOTLB 24
#define IOMMU_CAP_NPCACHE 26
--
2.19.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 05b7639da55f5555b9866a1f4b7e8995232a6323 ]
Otherwise, we hit bogus ENOENT when removing elements.
Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Reported-by: Václav Zindulka <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/netfilter/nft_set_rbtree.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 0e5ec126f6ad..b3e75f9cb686 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -302,10 +302,6 @@ static void *nft_rbtree_deactivate(const struct net *net,
else if (d > 0)
parent = parent->rb_right;
else {
- if (!nft_set_elem_active(&rbe->ext, genmask)) {
- parent = parent->rb_left;
- continue;
- }
if (nft_rbtree_interval_end(rbe) &&
!nft_rbtree_interval_end(this)) {
parent = parent->rb_left;
@@ -314,6 +310,9 @@ static void *nft_rbtree_deactivate(const struct net *net,
nft_rbtree_interval_end(this)) {
parent = parent->rb_right;
continue;
+ } else if (!nft_set_elem_active(&rbe->ext, genmask)) {
+ parent = parent->rb_left;
+ continue;
}
nft_rbtree_flush(net, set, rbe);
return rbe;
--
2.19.1
From: Xin Long <[email protected]>
[ Upstream commit e166e4fdaced850bee3d5ee12a5740258fb30587 ]
Since Commit 21d1196a35f5 ("ipv4: set transport header earlier"),
skb->transport_header has been always set before entering INET
netfilter. This patch is to set skb->transport_header for bridge
before entering INET netfilter by bridge-nf-call-iptables.
It also fixes an issue that sctp_error() couldn't compute a right
csum due to unset skb->transport_header.
Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang <[email protected]>
Suggested-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/bridge/br_netfilter_hooks.c | 1 +
net/bridge/br_netfilter_ipv6.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 3b0a03b92080..212c184c1eee 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -515,6 +515,7 @@ static unsigned int br_nf_pre_routing(void *priv,
nf_bridge->ipv4_daddr = ip_hdr(skb)->daddr;
skb->protocol = htons(ETH_P_IP);
+ skb->transport_header = skb->network_header + ip_hdr(skb)->ihl * 4;
NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING, state->net, state->sk, skb,
skb->dev, NULL,
diff --git a/net/bridge/br_netfilter_ipv6.c b/net/bridge/br_netfilter_ipv6.c
index 5811208863b7..09d5e0c7b3ba 100644
--- a/net/bridge/br_netfilter_ipv6.c
+++ b/net/bridge/br_netfilter_ipv6.c
@@ -235,6 +235,8 @@ unsigned int br_nf_pre_routing_ipv6(void *priv,
nf_bridge->ipv6_daddr = ipv6_hdr(skb)->daddr;
skb->protocol = htons(ETH_P_IPV6);
+ skb->transport_header = skb->network_header + sizeof(struct ipv6hdr);
+
NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING, state->net, state->sk, skb,
skb->dev, NULL,
br_nf_pre_routing_finish_ipv6);
--
2.19.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 22c971db7dd4b0ad8dd88e99c407f7a1f4231a2e ]
Colin King reported a bug in read_bbreg_hdl():
memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz);
The problem is that "val" is uninitialized.
This code is obviously not useful, but so far as I can tell
"pcmd->cmdcode" is never GEN_CMD_CODE(_Read_BBREG) so it's not harmful
either. For now the easiest fix is to just call r8712_free_cmd_obj()
and return.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: Colin Ian King <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/rtl8712/rtl8712_cmd.c | 10 +---------
drivers/staging/rtl8712/rtl8712_cmd.h | 2 +-
2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/rtl8712/rtl8712_cmd.c b/drivers/staging/rtl8712/rtl8712_cmd.c
index b1dfe9f46619..63bc811681d9 100644
--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -159,17 +159,9 @@ static u8 write_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
static u8 read_bbreg_hdl(struct _adapter *padapter, u8 *pbuf)
{
- u32 val;
- void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj *pcmd);
struct cmd_obj *pcmd = (struct cmd_obj *)pbuf;
- if (pcmd->rsp && pcmd->rspsz > 0)
- memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz);
- pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
- if (!pcmd_callback)
- r8712_free_cmd_obj(pcmd);
- else
- pcmd_callback(padapter, pcmd);
+ r8712_free_cmd_obj(pcmd);
return H2C_SUCCESS;
}
diff --git a/drivers/staging/rtl8712/rtl8712_cmd.h b/drivers/staging/rtl8712/rtl8712_cmd.h
index 9181bb6b04c3..a101a0a50955 100644
--- a/drivers/staging/rtl8712/rtl8712_cmd.h
+++ b/drivers/staging/rtl8712/rtl8712_cmd.h
@@ -152,7 +152,7 @@ enum rtl8712_h2c_cmd {
static struct _cmd_callback cmd_callback[] = {
{GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
{GEN_CMD_CODE(_Write_MACREG), NULL},
- {GEN_CMD_CODE(_Read_BBREG), &r8712_getbbrfreg_cmdrsp_callback},
+ {GEN_CMD_CODE(_Read_BBREG), NULL},
{GEN_CMD_CODE(_Write_BBREG), NULL},
{GEN_CMD_CODE(_Read_RFREG), &r8712_getbbrfreg_cmdrsp_callback},
{GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/
--
2.19.1
From: Harini Katakam <[email protected]>
[ Upstream commit cd5afa91f078c0787be0a62b5ef90301c00b0271 ]
Both PCLK and HCLK are "required" clocks according to macb devicetree
documentation. There is a chance that devm_clk_get doesn't return a
negative error but just a NULL clock structure instead. In such a case
the driver proceeds as usual and uses pclk value 0 to calculate MDC
divisor which is incorrect. Hence fix the same in clock initialization.
Signed-off-by: Harini Katakam <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/cadence/macb_main.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 8abea1c3844f..7d7b51383adf 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -3323,14 +3323,20 @@ static int macb_clk_init(struct platform_device *pdev, struct clk **pclk,
*hclk = devm_clk_get(&pdev->dev, "hclk");
}
- if (IS_ERR(*pclk)) {
+ if (IS_ERR_OR_NULL(*pclk)) {
err = PTR_ERR(*pclk);
+ if (!err)
+ err = -ENODEV;
+
dev_err(&pdev->dev, "failed to get macb_clk (%u)\n", err);
return err;
}
- if (IS_ERR(*hclk)) {
+ if (IS_ERR_OR_NULL(*hclk)) {
err = PTR_ERR(*hclk);
+ if (!err)
+ err = -ENODEV;
+
dev_err(&pdev->dev, "failed to get hclk (%u)\n", err);
return err;
}
--
2.19.1
From: Masanari Iida <[email protected]>
[ Upstream commit 41b37f4c0fa67185691bcbd30201cad566f2f0d1 ]
This patch fixes a spelling typo.
Signed-off-by: Masanari Iida <[email protected]>
Fixes: cc42603de320 ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support")
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index acc3b11fba2a..cde3025d9603 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -298,7 +298,7 @@
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmcc-supply = <®_sd3_vmmc>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- bus-witdh = <4>;
+ bus-width = <4>;
no-1-8-v;
status = "okay";
};
@@ -309,7 +309,7 @@
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
vmcc-supply = <®_sd4_vmmc>;
- bus-witdh = <8>;
+ bus-width = <8>;
no-1-8-v;
non-removable;
status = "okay";
--
2.19.1
From: Guido Kiener <[email protected]>
[ Upstream commit 091dacc3cc10979ab0422f0a9f7fcc27eee97e69 ]
Restore the status of ep->stopped in function net2272_dequeue().
When the given request is not found in the endpoint queue
the function returns -EINVAL without restoring the state of
ep->stopped. Thus the endpoint keeps blocked and does not transfer
any data anymore.
This fix is only compile-tested, since we do not have a
corresponding hardware. An analogous fix was tested in the sibling
driver. See "usb: gadget: net2280: Fix net2280_dequeue()"
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Guido Kiener <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/gadget/udc/net2272.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index b77f3126580e..c2011cd7df8c 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -945,6 +945,7 @@ net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req)
break;
}
if (&req->req != _req) {
+ ep->stopped = stopped;
spin_unlock_irqrestore(&ep->dev->lock, flags);
return -EINVAL;
}
--
2.19.1
From: Sreekanth Reddy <[email protected]>
[ Upstream commit c2fe742ff6e77c5b4fe4ad273191ddf28fdea25e ]
During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.
Reference of upstream discussion:
https://patchwork.kernel.org/patch/10734933/
Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.
Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it. By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.
Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.
Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 6 ++++++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 12 ++++++++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index b59bba3e6516..8776330175e3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3280,12 +3280,18 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
if (smid < ioc->hi_priority_smid) {
struct scsiio_tracker *st;
+ void *request;
st = _get_st_from_smid(ioc, smid);
if (!st) {
_base_recovery_check(ioc);
return;
}
+
+ /* Clear MPI request frame */
+ request = mpt3sas_base_get_msg_frame(ioc, smid);
+ memset(request, 0, ioc->request_sz);
+
mpt3sas_base_clear_st(ioc, st);
_base_recovery_check(ioc);
return;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 622832e55211..73d661a0ecbb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1474,11 +1474,23 @@ mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
struct scsi_cmnd *scmd = NULL;
struct scsiio_tracker *st;
+ Mpi25SCSIIORequest_t *mpi_request;
if (smid > 0 &&
smid <= ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT) {
u32 unique_tag = smid - 1;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /*
+ * If SCSI IO request is outstanding at driver level then
+ * DevHandle filed must be non-zero. If DevHandle is zero
+ * then it means that this smid is free at driver level,
+ * so return NULL.
+ */
+ if (!mpi_request->DevHandle)
+ return scmd;
+
scmd = scsi_host_find_tag(ioc->shost, unique_tag);
if (scmd) {
st = scsi_cmd_priv(scmd);
--
2.19.1
From: Aaro Koskinen <[email protected]>
[ Upstream commit 80acbed9f8fca1db3fbe915540b756f048aa0fd7 ]
Commit 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit
routine") overlooked jumbo frames when re-ordering the code, and as a
result the own bit was not getting set anymore for the first jumbo frame
descriptor. Commit 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo
frames") tried to fix this, but now the bit is getting set too early and
the DMA may start while we are still setting up the remaining descriptors.
And with the chain mode the own bit remains still unset.
Fix by setting the own bit at the end of xmit also with jumbo frames.
Fixes: 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit routine")
Fixes: 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo frames")
Signed-off-by: Aaro Koskinen <[email protected]>
Acked-by: Jose Abreu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 886176be818e..3d35cbeb1028 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3197,14 +3197,16 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
stmmac_prepare_tx_desc(priv, first, 1, nopaged_len,
csum_insertion, priv->mode, 1, last_segment,
skb->len);
-
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
- wmb();
+ } else {
+ stmmac_set_tx_owner(priv, first);
}
+ /* The own bit must be the latest setting done when prepare the
+ * descriptor and then barrier is needed to make sure that
+ * all is coherent before granting the DMA engine.
+ */
+ wmb();
+
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
stmmac_enable_dma_transmission(priv, priv->ioaddr);
--
2.19.1
From: Aditya Pakki <[email protected]>
[ Upstream commit 6a8ca24590a2136921439b376c926c11a6effc0e ]
phydm.internal is allocated using kzalloc which is used multiple
times without a check for NULL pointer. This patch avoids such a
scenario by returning 0, consistent with the failure case.
Signed-off-by: Aditya Pakki <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/rtlwifi/phydm/rtl_phydm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/rtlwifi/phydm/rtl_phydm.c b/drivers/staging/rtlwifi/phydm/rtl_phydm.c
index 9930ed954abb..4cc77b2016e1 100644
--- a/drivers/staging/rtlwifi/phydm/rtl_phydm.c
+++ b/drivers/staging/rtlwifi/phydm/rtl_phydm.c
@@ -180,6 +180,8 @@ static int rtl_phydm_init_priv(struct rtl_priv *rtlpriv,
rtlpriv->phydm.internal =
kzalloc(sizeof(struct phy_dm_struct), GFP_KERNEL);
+ if (!rtlpriv->phydm.internal)
+ return 0;
_rtl_phydm_init_com_info(rtlpriv, ic, params);
--
2.19.1
From: Andrei Vagin <[email protected]>
[ Upstream commit fcfc2aa0185f4a731d05a21e9f359968fdfd02e7 ]
There are a few system calls (pselect, ppoll, etc) which replace a task
sigmask while they are running in a kernel-space
When a task calls one of these syscalls, the kernel saves a current
sigmask in task->saved_sigmask and sets a syscall sigmask.
On syscall-exit-stop, ptrace traps a task before restoring the
saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and
PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by
saved_sigmask, when the task returns to user-space.
This patch fixes this problem. PTRACE_GETSIGMASK returns saved_sigmask
if it's set. PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 29000caecbe8 ("ptrace: add ability to get/set signal-blocked mask")
Signed-off-by: Andrei Vagin <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
include/linux/sched/signal.h | 18 ++++++++++++++++++
kernel/ptrace.c | 15 +++++++++++++--
2 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index 1be35729c2c5..660d78c9af6c 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -417,10 +417,20 @@ static inline void set_restore_sigmask(void)
set_thread_flag(TIF_RESTORE_SIGMASK);
WARN_ON(!test_thread_flag(TIF_SIGPENDING));
}
+
+static inline void clear_tsk_restore_sigmask(struct task_struct *tsk)
+{
+ clear_tsk_thread_flag(tsk, TIF_RESTORE_SIGMASK);
+}
+
static inline void clear_restore_sigmask(void)
{
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
+static inline bool test_tsk_restore_sigmask(struct task_struct *tsk)
+{
+ return test_tsk_thread_flag(tsk, TIF_RESTORE_SIGMASK);
+}
static inline bool test_restore_sigmask(void)
{
return test_thread_flag(TIF_RESTORE_SIGMASK);
@@ -438,6 +448,10 @@ static inline void set_restore_sigmask(void)
current->restore_sigmask = true;
WARN_ON(!test_thread_flag(TIF_SIGPENDING));
}
+static inline void clear_tsk_restore_sigmask(struct task_struct *tsk)
+{
+ tsk->restore_sigmask = false;
+}
static inline void clear_restore_sigmask(void)
{
current->restore_sigmask = false;
@@ -446,6 +460,10 @@ static inline bool test_restore_sigmask(void)
{
return current->restore_sigmask;
}
+static inline bool test_tsk_restore_sigmask(struct task_struct *tsk)
+{
+ return tsk->restore_sigmask;
+}
static inline bool test_and_clear_restore_sigmask(void)
{
if (!current->restore_sigmask)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 21fec73d45d4..fc0d667f5792 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -29,6 +29,7 @@
#include <linux/hw_breakpoint.h>
#include <linux/cn_proc.h>
#include <linux/compat.h>
+#include <linux/sched/signal.h>
/*
* Access another process' address space via ptrace.
@@ -925,18 +926,26 @@ int ptrace_request(struct task_struct *child, long request,
ret = ptrace_setsiginfo(child, &siginfo);
break;
- case PTRACE_GETSIGMASK:
+ case PTRACE_GETSIGMASK: {
+ sigset_t *mask;
+
if (addr != sizeof(sigset_t)) {
ret = -EINVAL;
break;
}
- if (copy_to_user(datavp, &child->blocked, sizeof(sigset_t)))
+ if (test_tsk_restore_sigmask(child))
+ mask = &child->saved_sigmask;
+ else
+ mask = &child->blocked;
+
+ if (copy_to_user(datavp, mask, sizeof(sigset_t)))
ret = -EFAULT;
else
ret = 0;
break;
+ }
case PTRACE_SETSIGMASK: {
sigset_t new_set;
@@ -962,6 +971,8 @@ int ptrace_request(struct task_struct *child, long request,
child->blocked = new_set;
spin_unlock_irq(&child->sighand->siglock);
+ clear_tsk_restore_sigmask(child);
+
ret = 0;
break;
}
--
2.19.1
From: Changbin Du <[email protected]>
[ Upstream commit 9c38f1f044080392603c497ecca4d7d09876ff99 ]
Backspace is not working on some terminal emulators which do not send the
key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127).
But currently only '^?' is handled. Let's also handle '^H' for those
terminals.
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
scripts/kconfig/lxdialog/inputbox.c | 3 ++-
scripts/kconfig/nconf.c | 2 +-
scripts/kconfig/nconf.gui.c | 3 ++-
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c
index fe82ff6d744e..b15c8d1744f5 100644
--- a/scripts/kconfig/lxdialog/inputbox.c
+++ b/scripts/kconfig/lxdialog/inputbox.c
@@ -126,7 +126,8 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width
case KEY_DOWN:
break;
case KEY_BACKSPACE:
- case 127:
+ case 8: /* ^H */
+ case 127: /* ^? */
if (pos) {
wattrset(dialog, dlg.inputbox.atr);
if (input_x == 0) {
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index 1ef232ae5ab9..c8ff1c99dd5c 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -1049,7 +1049,7 @@ static int do_match(int key, struct match_state *state, int *ans)
state->match_direction = FIND_NEXT_MATCH_UP;
*ans = get_mext_match(state->pattern,
state->match_direction);
- } else if (key == KEY_BACKSPACE || key == 127) {
+ } else if (key == KEY_BACKSPACE || key == 8 || key == 127) {
state->pattern[strlen(state->pattern)-1] = '\0';
adj_match_dir(&state->match_direction);
} else
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index 88874acfda36..820fc9256532 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -440,7 +440,8 @@ int dialog_inputbox(WINDOW *main_window,
case KEY_F(F_EXIT):
case KEY_F(F_BACK):
break;
- case 127:
+ case 8: /* ^H */
+ case 127: /* ^? */
case KEY_BACKSPACE:
if (cursor_position > 0) {
memmove(&result[cursor_position-1],
--
2.19.1
From: Martin George <[email protected]>
[ Upstream commit cc2278c413c3a06a93c23ee8722e4dd3d621de12 ]
When undergoing state transitions I/O might be requeued, hence
we should always call nvme_mpath_set_live() to schedule requeue_work
whenever the nvme device is live, independent on whether the
old state was live or not.
Signed-off-by: Martin George <[email protected]>
Signed-off-by: Gargi Srinivas <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/nvme/host/multipath.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index da8f5ad30c71..260248fbb8fe 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -349,15 +349,12 @@ static inline bool nvme_state_is_live(enum nvme_ana_state state)
static void nvme_update_ns_ana_state(struct nvme_ana_group_desc *desc,
struct nvme_ns *ns)
{
- enum nvme_ana_state old;
-
mutex_lock(&ns->head->lock);
- old = ns->ana_state;
ns->ana_grpid = le32_to_cpu(desc->grpid);
ns->ana_state = desc->state;
clear_bit(NVME_NS_ANA_PENDING, &ns->flags);
- if (nvme_state_is_live(ns->ana_state) && !nvme_state_is_live(old))
+ if (nvme_state_is_live(ns->ana_state))
nvme_mpath_set_live(ns);
mutex_unlock(&ns->head->lock);
}
--
2.19.1
From: Al Viro <[email protected]>
[ Upstream commit daf5cc27eed99afdea8d96e71b89ba41f5406ef6 ]
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
fs/ceph/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 4055ab4d5c52..3e518c2ae2bf 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -524,6 +524,7 @@ static void ceph_i_callback(struct rcu_head *head)
struct inode *inode = container_of(head, struct inode, i_rcu);
struct ceph_inode_info *ci = ceph_inode(inode);
+ kfree(ci->i_symlink);
kmem_cache_free(ceph_inode_cachep, ci);
}
@@ -561,7 +562,6 @@ void ceph_destroy_inode(struct inode *inode)
ceph_put_snap_realm(mdsc, realm);
}
- kfree(ci->i_symlink);
while ((n = rb_first(&ci->i_fragtree)) != NULL) {
frag = rb_entry(n, struct ceph_inode_frag, node);
rb_erase(n, &ci->i_fragtree);
--
2.19.1
From: Fabien Dessenne <[email protected]>
[ Upstream commit f4e68d58cf2b20a581759bbc7228052534652673 ]
Unlike 'client_ops' which is initialized to 'default_client_ops', the
port operations 'ops' may be left to NULL.
Check the 'ops' value before checking the 'ops->x' value.
Signed-off-by: Fabien Dessenne <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/tty/tty_port.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index c699d41a2a48..81b23905c544 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -327,7 +327,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty)
if (tty && C_HUPCL(tty))
tty_port_lower_dtr_rts(port);
- if (port->ops->shutdown)
+ if (port->ops && port->ops->shutdown)
port->ops->shutdown(port);
}
out:
@@ -402,7 +402,7 @@ EXPORT_SYMBOL_GPL(tty_port_tty_wakeup);
int tty_port_carrier_raised(struct tty_port *port)
{
- if (port->ops->carrier_raised == NULL)
+ if (!port->ops || !port->ops->carrier_raised)
return 1;
return port->ops->carrier_raised(port);
}
@@ -419,7 +419,7 @@ EXPORT_SYMBOL(tty_port_carrier_raised);
void tty_port_raise_dtr_rts(struct tty_port *port)
{
- if (port->ops->dtr_rts)
+ if (port->ops && port->ops->dtr_rts)
port->ops->dtr_rts(port, 1);
}
EXPORT_SYMBOL(tty_port_raise_dtr_rts);
@@ -435,7 +435,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts);
void tty_port_lower_dtr_rts(struct tty_port *port)
{
- if (port->ops->dtr_rts)
+ if (port->ops && port->ops->dtr_rts)
port->ops->dtr_rts(port, 0);
}
EXPORT_SYMBOL(tty_port_lower_dtr_rts);
@@ -691,7 +691,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,
if (!tty_port_initialized(port)) {
clear_bit(TTY_IO_ERROR, &tty->flags);
- if (port->ops->activate) {
+ if (port->ops && port->ops->activate) {
int retval = port->ops->activate(port, tty);
if (retval) {
mutex_unlock(&port->mutex);
--
2.19.1
From: Kangjie Lu <[email protected]>
[ Upstream commit 6cf4511e9729c00a7306cf94085f9cc3c52ee723 ]
In case devm_kzalloc, the patch returns ENOMEM to avoid potential
NULL pointer dereference.
Signed-off-by: Kangjie Lu <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpio/gpio-aspeed.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 2342e154029b..b696ec35efb3 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1225,6 +1225,8 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
gpio->offset_timer =
devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
+ if (!gpio->offset_timer)
+ return -ENOMEM;
return aspeed_gpio_setup_irqs(gpio, pdev);
}
--
2.19.1
From: Wen Yang <[email protected]>
[ Upstream commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <[email protected]>
Cc: Wingman Kwok <[email protected]>
Cc: Murali Karicheri <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/ti/netcp_ethss.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 72b98e27c992..d177dfd1df89 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -3655,12 +3655,16 @@ static int gbe_probe(struct netcp_device *netcp_device, struct device *dev,
ret = netcp_txpipe_init(&gbe_dev->tx_pipe, netcp_device,
gbe_dev->dma_chan_name, gbe_dev->tx_queue_id);
- if (ret)
+ if (ret) {
+ of_node_put(interfaces);
return ret;
+ }
ret = netcp_txpipe_open(&gbe_dev->tx_pipe);
- if (ret)
+ if (ret) {
+ of_node_put(interfaces);
return ret;
+ }
/* Create network interfaces */
INIT_LIST_HEAD(&gbe_dev->gbe_intf_head);
--
2.19.1
From: Wen Yang <[email protected]>
[ Upstream commit fa3a419d2f674b431d38748cb58fb7da17ee8949 ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <[email protected]>
Cc: Anirudha Sarangi <[email protected]>
Cc: John Linn <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index f24f48f33802..7cfd7ff38e86 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1574,12 +1574,14 @@ static int axienet_probe(struct platform_device *pdev)
ret = of_address_to_resource(np, 0, &dmares);
if (ret) {
dev_err(&pdev->dev, "unable to get DMA resource\n");
+ of_node_put(np);
goto free_netdev;
}
lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares);
if (IS_ERR(lp->dma_regs)) {
dev_err(&pdev->dev, "could not map DMA regs\n");
ret = PTR_ERR(lp->dma_regs);
+ of_node_put(np);
goto free_netdev;
}
lp->rx_irq = irq_of_parse_and_map(np, 1);
--
2.19.1
From: Thierry Reding <[email protected]>
[ Upstream commit 7cf77b273a8fc51e7de622fa6691abd4436a9a6b ]
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpu/drm/tegra/hub.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/hub.c b/drivers/gpu/drm/tegra/hub.c
index 8f4fcbb515fb..bb97cad1eb69 100644
--- a/drivers/gpu/drm/tegra/hub.c
+++ b/drivers/gpu/drm/tegra/hub.c
@@ -378,14 +378,16 @@ static int tegra_shared_plane_atomic_check(struct drm_plane *plane,
static void tegra_shared_plane_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
- struct tegra_dc *dc = to_tegra_dc(old_state->crtc);
struct tegra_plane *p = to_tegra_plane(plane);
+ struct tegra_dc *dc;
u32 value;
/* rien ne va plus */
if (!old_state || !old_state->crtc)
return;
+ dc = to_tegra_dc(old_state->crtc);
+
/*
* XXX Legacy helpers seem to sometimes call ->atomic_disable() even
* on planes that are already disabled. Make sure we fallback to the
--
2.19.1
From: Lukas Wunner <[email protected]>
[ Upstream commit 761cfa979a0c177d6c2d93ef5585cd79ae49a7d5 ]
Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and
reset gpio") amended the ks8851 driver to briefly assert the chip's
reset pin on probe. It also amended the probe routine's error path to
reassert the reset pin if a subsequent initialization step fails.
However the commit misplaced reassertion of the reset pin in the error
path such that it is not performed if the check of the Chip ID and
Enable Register (CIDER) fails. The error path is therefore slightly
asymmetrical to the probe routine's body. Fix it.
Signed-off-by: Lukas Wunner <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Nishanth Menon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/micrel/ks8851.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index a93f8e842c07..1633fa5c709c 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -1554,9 +1554,9 @@ static int ks8851_probe(struct spi_device *spi)
free_irq(ndev->irq, ks);
err_irq:
+err_id:
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
-err_id:
regulator_disable(ks->vdd_reg);
err_reg:
regulator_disable(ks->vdd_io);
--
2.19.1
From: Guido Kiener <[email protected]>
[ Upstream commit 9d6a54c1430647355a5e23434881b2ca3d192b48 ]
The OUT endpoint normally blocks (NAK) subsequent packets when a
short packet was received and returns an incomplete queue entry to
the gadget driver. Thereby the gadget driver can detect a short packet
when reading queue entries with a length that is not equal to a
multiple of packet size.
The start_queue() function enables receiving OUT packets regardless of
the content of the OUT FIFO. This results in a race: With the current
code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat)
& BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short
packet will be received, and then start_queue() will call
stop_out_naking(). That's what we don't want (OUT naking gets turned
off while there is data in the FIFO) because then the next driver
request might receive a mixture of old and new packets.
With the patch, this race can't occur because the FIFO's state is
tested after we know that OUT naking is already turned on, and OUT
naking is stopped only when both of the conditions are met. This
ensures that all received data is delivered to the gadget driver,
which can detect a short packet now before new packets are appended
to the last short packet.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Guido Kiener <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/gadget/udc/net2280.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index b02ab2a8d927..c57046b1da0e 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -866,9 +866,6 @@ static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma)
(void) readl(&ep->dev->pci->pcimstctl);
writel(BIT(DMA_START), &dma->dmastat);
-
- if (!ep->is_in)
- stop_out_naking(ep);
}
static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
@@ -907,6 +904,7 @@ static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
writel(BIT(DMA_START), &dma->dmastat);
return;
}
+ stop_out_naking(ep);
}
tmp = dmactl_default;
--
2.19.1
From: Marc Zyngier <[email protected]>
[ Upstream commit 7494cec6cb3ba7385a6a223b81906384f15aae34 ]
Calling kvm_is_visible_gfn() implies that we're parsing the memslots,
and doing this without the srcu lock is frown upon:
[12704.164532] =============================
[12704.164544] WARNING: suspicious RCU usage
[12704.164560] 5.1.0-rc1-00008-g600025238f51-dirty #16 Tainted: G W
[12704.164573] -----------------------------
[12704.164589] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[12704.164602] other info that might help us debug this:
[12704.164616] rcu_scheduler_active = 2, debug_locks = 1
[12704.164631] 6 locks held by qemu-system-aar/13968:
[12704.164644] #0: 000000007ebdae4f (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[12704.164691] #1: 000000007d751022 (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[12704.164726] #2: 00000000219d2706 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164761] #3: 00000000a760aecd (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164794] #4: 000000000ef8e31d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164827] #5: 000000007a872093 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164861] stack backtrace:
[12704.164878] CPU: 2 PID: 13968 Comm: qemu-system-aar Tainted: G W 5.1.0-rc1-00008-g600025238f51-dirty #16
[12704.164887] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[12704.164896] Call trace:
[12704.164910] dump_backtrace+0x0/0x138
[12704.164920] show_stack+0x24/0x30
[12704.164934] dump_stack+0xbc/0x104
[12704.164946] lockdep_rcu_suspicious+0xcc/0x110
[12704.164958] gfn_to_memslot+0x174/0x190
[12704.164969] kvm_is_visible_gfn+0x28/0x70
[12704.164980] vgic_its_check_id.isra.0+0xec/0x1e8
[12704.164991] vgic_its_save_tables_v0+0x1ac/0x330
[12704.165001] vgic_its_set_attr+0x298/0x3a0
[12704.165012] kvm_device_ioctl_attr+0x9c/0xd8
[12704.165022] kvm_device_ioctl+0x8c/0xf8
[12704.165035] do_vfs_ioctl+0xc8/0x960
[12704.165045] ksys_ioctl+0x8c/0xa0
[12704.165055] __arm64_sys_ioctl+0x28/0x38
[12704.165067] el0_svc_common+0xd8/0x138
[12704.165078] el0_svc_handler+0x38/0x78
[12704.165089] el0_svc+0x8/0xc
Make sure the lock is taken when doing this.
Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
virt/kvm/arm/vgic/vgic-its.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index c1071ed888e2..621bb004067e 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -760,8 +760,9 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
int l1_tbl_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
u64 indirect_ptr, type = GITS_BASER_TYPE(baser);
int esz = GITS_BASER_ENTRY_SIZE(baser);
- int index;
+ int index, idx;
gfn_t gfn;
+ bool ret;
switch (type) {
case GITS_BASER_TYPE_DEVICE:
@@ -788,7 +789,8 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
if (eaddr)
*eaddr = addr;
- return kvm_is_visible_gfn(its->dev->kvm, gfn);
+
+ goto out;
}
/* calculate and check the index into the 1st level */
@@ -822,7 +824,12 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
if (eaddr)
*eaddr = indirect_ptr;
- return kvm_is_visible_gfn(its->dev->kvm, gfn);
+
+out:
+ idx = srcu_read_lock(&its->dev->kvm->srcu);
+ ret = kvm_is_visible_gfn(its->dev->kvm, gfn);
+ srcu_read_unlock(&its->dev->kvm->srcu, idx);
+ return ret;
}
static int vgic_its_alloc_collection(struct vgic_its *its,
--
2.19.1
From: Petr Štetiar <[email protected]>
[ Upstream commit 72ff51d8dd262d1fef25baedc2ac35116435be47 ]
Andrey has reported on OpenWrt's bug tracking system[1], that he
currently can't use ar93xx_uart as pure serial UART without console
(CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined),
because compilation ends with following error:
ar933x_uart.c: In function 'ar933x_uart_console_write':
ar933x_uart.c:550:14: error: 'struct uart_port' has no
member named 'sysrq'
So this patch moves all the code related to console handling behind
series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2152
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Andrey Batyiev <[email protected]>
Reported-by: Andrey Batyiev <[email protected]>
Tested-by: Andrey Batyiev <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/tty/serial/ar933x_uart.c | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index db5df3d54818..3bdd56a1021b 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -49,11 +49,6 @@ struct ar933x_uart_port {
struct clk *clk;
};
-static inline bool ar933x_uart_console_enabled(void)
-{
- return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
-}
-
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
int offset)
{
@@ -508,6 +503,7 @@ static const struct uart_ops ar933x_uart_ops = {
.verify_port = ar933x_uart_verify_port,
};
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
static struct ar933x_uart_port *
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
@@ -604,14 +600,7 @@ static struct console ar933x_uart_console = {
.index = -1,
.data = &ar933x_uart_driver,
};
-
-static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
-{
- if (!ar933x_uart_console_enabled())
- return;
-
- ar933x_console_ports[up->port.line] = up;
-}
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
static struct uart_driver ar933x_uart_driver = {
.owner = THIS_MODULE,
@@ -700,7 +689,9 @@ static int ar933x_uart_probe(struct platform_device *pdev)
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
- ar933x_uart_add_console_port(up);
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_console_ports[up->port.line] = up;
+#endif
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
if (ret)
@@ -749,8 +740,9 @@ static int __init ar933x_uart_init(void)
{
int ret;
- if (ar933x_uart_console_enabled())
- ar933x_uart_driver.cons = &ar933x_uart_console;
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_uart_driver.cons = &ar933x_uart_console;
+#endif
ret = uart_register_driver(&ar933x_uart_driver);
if (ret)
--
2.19.1
From: Mao Wenan <[email protected]>
[ Upstream commit ac0cdb3d990108df795b676cd0d0e65ac34b2273 ]
Add the missing uart_unregister_driver() and i2c_del_driver() before return
from sc16is7xx_init() in the error handling case.
Signed-off-by: Mao Wenan <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/tty/serial/sc16is7xx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 47b41159a8bc..55b178c1bd65 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1481,7 +1481,7 @@ static int __init sc16is7xx_init(void)
ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
- return ret;
+ goto err_i2c;
}
#endif
@@ -1489,10 +1489,18 @@ static int __init sc16is7xx_init(void)
ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx spi --> %d\n", ret);
- return ret;
+ goto err_spi;
}
#endif
return ret;
+
+err_spi:
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+ i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+#endif
+err_i2c:
+ uart_unregister_driver(&sc16is7xx_uart);
+ return ret;
}
module_init(sc16is7xx_init);
--
2.19.1
From: Wen Yang <[email protected]>
[ Upstream commit 0c17e83fe423467e3ccf0a02f99bd050a73bbeb4 ]
The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./arch/arm/mach-imx/mach-imx51.c:64:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 57, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <[email protected]>
Cc: Russell King <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/mach-imx/mach-imx51.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index c7169c2f94c4..08c7892866c2 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -59,6 +59,7 @@ static void __init imx51_m4if_setup(void)
return;
m4if_base = of_iomap(np, 0);
+ of_node_put(np);
if (!m4if_base) {
pr_err("Unable to map M4IF registers\n");
return;
--
2.19.1
From: Björn Töpel <[email protected]>
[ Upstream commit 044175a06706d516aa42874bb44dbbfc3c4d20eb ]
When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.
It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].
This patch fixes the memory leak by removing the task lookup logic
completely.
[1] https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby <[email protected]>
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
include/net/xdp_sock.h | 1 -
net/xdp/xdp_umem.c | 19 +------------------
2 files changed, 1 insertion(+), 19 deletions(-)
diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h
index 7161856bcf9c..c2c10cc9ffa0 100644
--- a/include/net/xdp_sock.h
+++ b/include/net/xdp_sock.h
@@ -34,7 +34,6 @@ struct xdp_umem {
u32 headroom;
u32 chunk_size_nohr;
struct user_struct *user;
- struct pid *pid;
unsigned long address;
refcount_t users;
struct work_struct work;
diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c
index bfe2dbea480b..a3b037fbfecd 100644
--- a/net/xdp/xdp_umem.c
+++ b/net/xdp/xdp_umem.c
@@ -152,9 +152,6 @@ static void xdp_umem_unaccount_pages(struct xdp_umem *umem)
static void xdp_umem_release(struct xdp_umem *umem)
{
- struct task_struct *task;
- struct mm_struct *mm;
-
xdp_umem_clear_dev(umem);
if (umem->fq) {
@@ -169,21 +166,10 @@ static void xdp_umem_release(struct xdp_umem *umem)
xdp_umem_unpin_pages(umem);
- task = get_pid_task(umem->pid, PIDTYPE_PID);
- put_pid(umem->pid);
- if (!task)
- goto out;
- mm = get_task_mm(task);
- put_task_struct(task);
- if (!mm)
- goto out;
-
- mmput(mm);
kfree(umem->pages);
umem->pages = NULL;
xdp_umem_unaccount_pages(umem);
-out:
kfree(umem);
}
@@ -312,7 +298,6 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
if (size_chk < 0)
return -EINVAL;
- umem->pid = get_task_pid(current, PIDTYPE_PID);
umem->address = (unsigned long)addr;
umem->props.chunk_mask = ~((u64)chunk_size - 1);
umem->props.size = size;
@@ -328,7 +313,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
err = xdp_umem_account_pages(umem);
if (err)
- goto out;
+ return err;
err = xdp_umem_pin_pages(umem);
if (err)
@@ -347,8 +332,6 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
out_account:
xdp_umem_unaccount_pages(umem);
-out:
- put_pid(umem->pid);
return err;
}
--
2.19.1
From: Kangjie Lu <[email protected]>
[ Upstream commit 2795e8c251614ac0784c9d41008551109f665716 ]
In case alloc_ordered_workqueue fails, the fix releases
sources and returns -ENOMEM to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ieee802154/adf7242.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
index cd1d8faccca5..cd6b95e673a5 100644
--- a/drivers/net/ieee802154/adf7242.c
+++ b/drivers/net/ieee802154/adf7242.c
@@ -1268,6 +1268,10 @@ static int adf7242_probe(struct spi_device *spi)
INIT_DELAYED_WORK(&lp->work, adf7242_rx_cal_work);
lp->wqueue = alloc_ordered_workqueue(dev_name(&spi->dev),
WQ_MEM_RECLAIM);
+ if (unlikely(!lp->wqueue)) {
+ ret = -ENOMEM;
+ goto err_hw_init;
+ }
ret = adf7242_hw_init(lp);
if (ret)
--
2.19.1
From: Martin Schwidefsky <[email protected]>
[ Upstream commit cd479eccd2e057116d504852814402a1e68ead80 ]
For a 64-bit process the randomization of the program break is quite
large with 1GB. That is as big as the randomization of the anonymous
mapping base, for a test case started with '/lib/ld64.so.1 <exec>'
it can happen that the heap is placed after the stack. To avoid
this limit the program break randomization to 32MB for 64-bit and
keep 8MB for 31-bit.
Reported-by: Stefan Liebler <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/s390/include/asm/elf.h | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 7d22a474a040..f74639a05f0f 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -252,11 +252,14 @@ do { \
/*
* Cache aliasing on the latest machines calls for a mapping granularity
- * of 512KB. For 64-bit processes use a 512KB alignment and a randomization
- * of up to 1GB. For 31-bit processes the virtual address space is limited,
- * use no alignment and limit the randomization to 8MB.
+ * of 512KB for the anonymous mapping base. For 64-bit processes use a
+ * 512KB alignment and a randomization of up to 1GB. For 31-bit processes
+ * the virtual address space is limited, use no alignment and limit the
+ * randomization to 8MB.
+ * For the additional randomization of the program break use 32MB for
+ * 64-bit and 8MB for 31-bit.
*/
-#define BRK_RND_MASK (is_compat_task() ? 0x7ffUL : 0x3ffffUL)
+#define BRK_RND_MASK (is_compat_task() ? 0x7ffUL : 0x1fffUL)
#define MMAP_RND_MASK (is_compat_task() ? 0x7ffUL : 0x3ff80UL)
#define MMAP_ALIGN_MASK (is_compat_task() ? 0 : 0x7fUL)
#define STACK_RND_MASK MMAP_RND_MASK
--
2.19.1
From: Aditya Pakki <[email protected]>
[ Upstream commit 41f00e6e9e55546390031996b773e7f3c1d95928 ]
of_match_device in usb251xb_probe can fail and returns a NULL pointer.
The patch avoids a potential NULL pointer dereference in this scenario.
Signed-off-by: Aditya Pakki <[email protected]>
Reviewed-by: Richard Leitner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/usb/misc/usb251xb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index a6efb9a72939..5f7734c729b1 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -601,7 +601,7 @@ static int usb251xb_probe(struct usb251xb *hub)
dev);
int err;
- if (np) {
+ if (np && of_id) {
err = usb251xb_get_ofdata(hub,
(struct usb251xb_data *)of_id->data);
if (err) {
--
2.19.1
From: Ilya Dryomov <[email protected]>
[ Upstream commit 187df76325af5d9e12ae9daec1510307797e54f0 ]
A bvec can now consist of multiple physically contiguous pages.
This means that bvec_iter_advance() can move to a different page while
staying in the same bvec (i.e. ->bi_bvec_done != 0).
The messenger works in terms of segments which can now be defined as
the smaller of a bvec and a page. The "more bytes to process in this
segment" condition holds only if bvec_iter_advance() leaves us in the
same bvec _and_ in the same page. On next bvec (possibly in the same
page) and on next page (possibly in the same bvec) we may need to set
->last_piece.
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/ceph/messenger.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f7d7f32ac673..ef5216206bdf 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -870,6 +870,7 @@ static bool ceph_msg_data_bio_advance(struct ceph_msg_data_cursor *cursor,
size_t bytes)
{
struct ceph_bio_iter *it = &cursor->bio_iter;
+ struct page *page = bio_iter_page(it->bio, it->iter);
BUG_ON(bytes > cursor->resid);
BUG_ON(bytes > bio_iter_len(it->bio, it->iter));
@@ -881,7 +882,8 @@ static bool ceph_msg_data_bio_advance(struct ceph_msg_data_cursor *cursor,
return false; /* no more data */
}
- if (!bytes || (it->iter.bi_size && it->iter.bi_bvec_done))
+ if (!bytes || (it->iter.bi_size && it->iter.bi_bvec_done &&
+ page == bio_iter_page(it->bio, it->iter)))
return false; /* more bytes to process in this segment */
if (!it->iter.bi_size) {
@@ -929,6 +931,7 @@ static bool ceph_msg_data_bvecs_advance(struct ceph_msg_data_cursor *cursor,
size_t bytes)
{
struct bio_vec *bvecs = cursor->data->bvec_pos.bvecs;
+ struct page *page = bvec_iter_page(bvecs, cursor->bvec_iter);
BUG_ON(bytes > cursor->resid);
BUG_ON(bytes > bvec_iter_len(bvecs, cursor->bvec_iter));
@@ -940,7 +943,8 @@ static bool ceph_msg_data_bvecs_advance(struct ceph_msg_data_cursor *cursor,
return false; /* no more data */
}
- if (!bytes || cursor->bvec_iter.bi_bvec_done)
+ if (!bytes || (cursor->bvec_iter.bi_bvec_done &&
+ page == bvec_iter_page(bvecs, cursor->bvec_iter)))
return false; /* more bytes to process in this segment */
BUG_ON(cursor->last_piece);
--
2.19.1
From: Rafał Miłecki <[email protected]>
[ Upstream commit 4cb6560514fa19d556954b88128f3846fee66a03 ]
Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().
Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1
Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().
This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/leds/trigger/ledtrig-netdev.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 3dd3ed46d473..167a94c02d05 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -301,11 +301,11 @@ static int netdev_trig_notify(struct notifier_block *nb,
container_of(nb, struct led_netdev_data, notifier);
if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
- && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
- && evt != NETDEV_CHANGENAME)
+ && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
return NOTIFY_DONE;
- if (strcmp(dev->name, trigger_data->device_name))
+ if (!(dev == trigger_data->net_dev ||
+ (evt == NETDEV_REGISTER && !strcmp(dev->name, trigger_data->device_name))))
return NOTIFY_DONE;
cancel_delayed_work_sync(&trigger_data->work);
@@ -320,12 +320,9 @@ static int netdev_trig_notify(struct notifier_block *nb,
dev_hold(dev);
trigger_data->net_dev = dev;
break;
- case NETDEV_CHANGENAME:
case NETDEV_UNREGISTER:
- if (trigger_data->net_dev) {
- dev_put(trigger_data->net_dev);
- trigger_data->net_dev = NULL;
- }
+ dev_put(trigger_data->net_dev);
+ trigger_data->net_dev = NULL;
break;
case NETDEV_UP:
case NETDEV_CHANGE:
--
2.19.1
From: Jarkko Nikula <[email protected]>
[ Upstream commit 5cd1c56c42beb6d228cc8d4373fdc5f5ec78a5ad ]
Add PCI ID for Intel Comet Lake PCH.
Signed-off-by: Jarkko Nikula <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
Documentation/i2c/busses/i2c-i801 | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 4 ++++
3 files changed, 6 insertions(+)
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index d1ee484a787d..ee9984f35868 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -36,6 +36,7 @@ Supported adapters:
* Intel Cannon Lake (PCH)
* Intel Cedar Fork (PCH)
* Intel Ice Lake (PCH)
+ * Intel Comet Lake (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ac4b09642f63..8f803812ea24 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -131,6 +131,7 @@ config I2C_I801
Cannon Lake (PCH)
Cedar Fork (PCH)
Ice Lake (PCH)
+ Comet Lake (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c91e145ef5a5..679c6c41f64b 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -71,6 +71,7 @@
* Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
* Cedar Fork (PCH) 0x18df 32 hard yes yes yes
* Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes
+ * Comet Lake (PCH) 0x02a3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -240,6 +241,7 @@
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3
struct i801_mux_config {
char *gpio_chip;
@@ -1038,6 +1040,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) },
{ 0, }
};
@@ -1534,6 +1537,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
+ case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
priv->features |= FEATURE_SMBUS_PEC;
--
2.19.1
From: Marc Zyngier <[email protected]>
[ Upstream commit a6ecfb11bf37743c1ac49b266595582b107b61d4 ]
When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.
When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:
[ 69.680416] =============================
[ 69.680819] WARNING: suspicious RCU usage
[ 69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[ 69.682096] -----------------------------
[ 69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[ 69.683225]
[ 69.683225] other info that might help us debug this:
[ 69.683225]
[ 69.683975]
[ 69.683975] rcu_scheduler_active = 2, debug_locks = 1
[ 69.684598] 6 locks held by qemu-system-aar/4097:
[ 69.685059] #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[ 69.686087] #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[ 69.686919] #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.687698] #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.688475] #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.689978] #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.690729]
[ 69.690729] stack backtrace:
[ 69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[ 69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[ 69.692831] Call trace:
[ 69.694072] lockdep_rcu_suspicious+0xcc/0x110
[ 69.694490] gfn_to_memslot+0x174/0x190
[ 69.694853] kvm_write_guest+0x50/0xb0
[ 69.695209] vgic_its_save_tables_v0+0x248/0x330
[ 69.695639] vgic_its_set_attr+0x298/0x3a0
[ 69.696024] kvm_device_ioctl_attr+0x9c/0xd8
[ 69.696424] kvm_device_ioctl+0x8c/0xf8
[ 69.696788] do_vfs_ioctl+0xc8/0x960
[ 69.697128] ksys_ioctl+0x8c/0xa0
[ 69.697445] __arm64_sys_ioctl+0x28/0x38
[ 69.697817] el0_svc_common+0xd8/0x138
[ 69.698173] el0_svc_handler+0x38/0x78
[ 69.698528] el0_svc+0x8/0xc
The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242ab98. One wonders why this wasn't
fixed at the same time, but hey...
Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/include/asm/kvm_mmu.h | 11 +++++++++++
arch/arm64/include/asm/kvm_mmu.h | 11 +++++++++++
virt/kvm/arm/vgic/vgic-its.c | 8 ++++----
virt/kvm/arm/vgic/vgic-v3.c | 4 ++--
4 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 265ea9cf7df7..523c499e42db 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -317,6 +317,17 @@ static inline int kvm_read_guest_lock(struct kvm *kvm,
return ret;
}
+static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa,
+ const void *data, unsigned long len)
+{
+ int srcu_idx = srcu_read_lock(&kvm->srcu);
+ int ret = kvm_write_guest(kvm, gpa, data, len);
+
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+ return ret;
+}
+
static inline void *kvm_get_hyp_vector(void)
{
switch(read_cpuid_part()) {
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index d6fff7de5539..b2558447c67d 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -394,6 +394,17 @@ static inline int kvm_read_guest_lock(struct kvm *kvm,
return ret;
}
+static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa,
+ const void *data, unsigned long len)
+{
+ int srcu_idx = srcu_read_lock(&kvm->srcu);
+ int ret = kvm_write_guest(kvm, gpa, data, len);
+
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+ return ret;
+}
+
#ifdef CONFIG_KVM_INDIRECT_VECTORS
/*
* EL2 vectors can be mapped and rerouted in a number of ways,
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index f376c82afb61..c1071ed888e2 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -1935,7 +1935,7 @@ static int vgic_its_save_ite(struct vgic_its *its, struct its_device *dev,
((u64)ite->irq->intid << KVM_ITS_ITE_PINTID_SHIFT) |
ite->collection->collection_id;
val = cpu_to_le64(val);
- return kvm_write_guest(kvm, gpa, &val, ite_esz);
+ return kvm_write_guest_lock(kvm, gpa, &val, ite_esz);
}
/**
@@ -2082,7 +2082,7 @@ static int vgic_its_save_dte(struct vgic_its *its, struct its_device *dev,
(itt_addr_field << KVM_ITS_DTE_ITTADDR_SHIFT) |
(dev->num_eventid_bits - 1));
val = cpu_to_le64(val);
- return kvm_write_guest(kvm, ptr, &val, dte_esz);
+ return kvm_write_guest_lock(kvm, ptr, &val, dte_esz);
}
/**
@@ -2262,7 +2262,7 @@ static int vgic_its_save_cte(struct vgic_its *its,
((u64)collection->target_addr << KVM_ITS_CTE_RDBASE_SHIFT) |
collection->collection_id);
val = cpu_to_le64(val);
- return kvm_write_guest(its->dev->kvm, gpa, &val, esz);
+ return kvm_write_guest_lock(its->dev->kvm, gpa, &val, esz);
}
static int vgic_its_restore_cte(struct vgic_its *its, gpa_t gpa, int esz)
@@ -2333,7 +2333,7 @@ static int vgic_its_save_collection_table(struct vgic_its *its)
*/
val = 0;
BUG_ON(cte_esz > sizeof(val));
- ret = kvm_write_guest(its->dev->kvm, gpa, &val, cte_esz);
+ ret = kvm_write_guest_lock(its->dev->kvm, gpa, &val, cte_esz);
return ret;
}
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index 9c0dd234ebe8..3f2350a4d4ab 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -358,7 +358,7 @@ int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq)
if (status) {
/* clear consumed data */
val &= ~(1 << bit_nr);
- ret = kvm_write_guest(kvm, ptr, &val, 1);
+ ret = kvm_write_guest_lock(kvm, ptr, &val, 1);
if (ret)
return ret;
}
@@ -409,7 +409,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
else
val &= ~(1 << bit_nr);
- ret = kvm_write_guest(kvm, ptr, &val, 1);
+ ret = kvm_write_guest_lock(kvm, ptr, &val, 1);
if (ret)
return ret;
}
--
2.19.1
From: Matteo Croce <[email protected]>
[ Upstream commit b929a500d68479163c48739d809cbf4c1335db6f ]
Since commit
ad67b74d2469 ("printk: hash addresses printed with %p")
at boot "____ptrval____" is printed instead of the trampoline addresses:
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Remove the print as we don't want to leak kernel addresses and this
statement is not needed anymore.
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/x86/realmode/init.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index d10105825d57..47d097946872 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -20,8 +20,6 @@ void __init set_real_mode_mem(phys_addr_t mem, size_t size)
void *base = __va(mem);
real_mode_header = (struct real_mode_header *) base;
- printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
- base, (unsigned long long)mem, size);
}
void __init reserve_real_mode(void)
--
2.19.1
From: Jean-Philippe Brucker <[email protected]>
[ Upstream commit 2d8f92897ad816f5dda54b2ed2fd9f2d7cb1abde ]
meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to
use-after-free if the IRQ fires after unbind:
[ 64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc
...
[ 64.662001] pc : meson_irq+0x18/0x30 [meson_drm]
I'm assuming that a similar problem could happen on the error path of
bind(), so uninstall the IRQ handler there as well.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 4a72fa53a1d5..588b3b0c8315 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -300,10 +300,12 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
ret = drm_dev_register(drm, 0);
if (ret)
- goto free_drm;
+ goto uninstall_irq;
return 0;
+uninstall_irq:
+ drm_irq_uninstall(drm);
free_drm:
drm_dev_put(drm);
@@ -321,6 +323,7 @@ static void meson_drv_unbind(struct device *dev)
struct drm_device *drm = priv->drm;
drm_dev_unregister(drm);
+ drm_irq_uninstall(drm);
drm_kms_helper_poll_fini(drm);
drm_fbdev_cma_fini(priv->fbdev);
drm_mode_config_cleanup(drm);
--
2.19.1
From: Lukas Wunner <[email protected]>
[ Upstream commit 9624bafa5f6418b9ca5b3f66d1f6a6a2e8bf6d4c ]
The ks8851 chip's initial carrier state is down. A Link Change Interrupt
is signaled once interrupts are enabled if the carrier is up.
The ks8851 driver has it backwards by assuming that the initial carrier
state is up. The state is therefore misrepresented if the interface is
opened with no cable attached. Fix it.
The Link Change interrupt is sometimes not signaled unless the P1MBSR
register (which contains the Link Status bit) is read on ->ndo_open().
This might be a hardware erratum. Read the register by calling
mii_check_link(), which has the desirable side effect of setting the
carrier state to down if the cable was detached while the interface was
closed.
Signed-off-by: Lukas Wunner <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Tristram Ha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/micrel/ks8851.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index c9faec4c5b25..b83b070a9eec 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -858,6 +858,7 @@ static int ks8851_net_open(struct net_device *dev)
netif_dbg(ks, ifup, ks->netdev, "network device up\n");
mutex_unlock(&ks->lock);
+ mii_check_link(&ks->mii);
return 0;
}
@@ -1519,6 +1520,7 @@ static int ks8851_probe(struct spi_device *spi)
spi_set_drvdata(spi, ks);
+ netif_carrier_off(ks->netdev);
ndev->if_port = IF_PORT_100BASET;
ndev->netdev_ops = &ks8851_netdev_ops;
ndev->irq = spi->irq;
--
2.19.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit d1fa381033eb718df5c602f64b6e88676138dfc6 ]
With NETFILTER_XT_TARGET_TEE=y and IP6_NF_IPTABLES=m, we get a link
error when referencing the NF_DUP_IPV6 module:
net/netfilter/xt_TEE.o: In function `tee_tg6':
xt_TEE.c:(.text+0x14): undefined reference to `nf_dup_ipv6'
The problem here is the 'select NF_DUP_IPV6 if IP6_NF_IPTABLES'
that forces NF_DUP_IPV6 to be =m as well rather than setting it
to =y as was intended here. Adding a soft dependency on
IP6_NF_IPTABLES avoids that broken configuration.
Fixes: 5d400a4933e8 ("netfilter: Kconfig: Change select IPv6 dependencies")
Cc: Máté Eckl <[email protected]>
Cc: Taehee Yoo <[email protected]>
Link: https://patchwork.ozlabs.org/patch/999498/
Link: https://lore.kernel.org/patchwork/patch/960062/
Reported-by: Randy Dunlap <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/netfilter/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index f61c306de1d0..e0fb56d67d42 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -1003,6 +1003,7 @@ config NETFILTER_XT_TARGET_TEE
depends on NETFILTER_ADVANCED
depends on IPV6 || IPV6=n
depends on !NF_CONNTRACK || NF_CONNTRACK
+ depends on IP6_NF_IPTABLES || !IP6_NF_IPTABLES
select NF_DUP_IPV4
select NF_DUP_IPV6 if IP6_NF_IPTABLES
---help---
--
2.19.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 1beea6204e2304dd11600791d8dad8e7350af6ad ]
When building without CONFIG_OF, the compiler loses track of the flow
control in axis_fifo_probe(), and thinks that many variables are used
without an initialization even though we actually leave the function
before the first use:
drivers/staging/axis-fifo/axis-fifo.c: In function 'axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:900:5: error: 'rxd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (rxd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:907:5: error: 'txd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (txd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:914:5: error: 'has_tdest' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (has_tdest) {
^
drivers/staging/axis-fifo/axis-fifo.c:919:5: error: 'has_tid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
When CONFIG_OF is set, this does not happen, and since the driver cannot
work without it, just add that option as a Kconfig dependency.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/staging/axis-fifo/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/axis-fifo/Kconfig b/drivers/staging/axis-fifo/Kconfig
index 687537203d9c..d9725888af6f 100644
--- a/drivers/staging/axis-fifo/Kconfig
+++ b/drivers/staging/axis-fifo/Kconfig
@@ -3,6 +3,7 @@
#
config XIL_AXIS_FIFO
tristate "Xilinx AXI-Stream FIFO IP core driver"
+ depends on OF
default n
help
This adds support for the Xilinx AXI-Stream
--
2.19.1
On Mon, Apr 22, 2019 at 9:46 PM Sasha Levin <[email protected]> wrote:
>
> From: Ilya Dryomov <[email protected]>
>
> [ Upstream commit 187df76325af5d9e12ae9daec1510307797e54f0 ]
>
> A bvec can now consist of multiple physically contiguous pages.
> This means that bvec_iter_advance() can move to a different page while
> staying in the same bvec (i.e. ->bi_bvec_done != 0).
>
> The messenger works in terms of segments which can now be defined as
> the smaller of a bvec and a page. The "more bytes to process in this
> segment" condition holds only if bvec_iter_advance() leaves us in the
> same bvec _and_ in the same page. On next bvec (possibly in the same
> page) and on next page (possibly in the same bvec) we may need to set
> ->last_piece.
>
> Signed-off-by: Ilya Dryomov <[email protected]>
> Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
> ---
> net/ceph/messenger.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> index f7d7f32ac673..ef5216206bdf 100644
> --- a/net/ceph/messenger.c
> +++ b/net/ceph/messenger.c
> @@ -870,6 +870,7 @@ static bool ceph_msg_data_bio_advance(struct ceph_msg_data_cursor *cursor,
> size_t bytes)
> {
> struct ceph_bio_iter *it = &cursor->bio_iter;
> + struct page *page = bio_iter_page(it->bio, it->iter);
>
> BUG_ON(bytes > cursor->resid);
> BUG_ON(bytes > bio_iter_len(it->bio, it->iter));
> @@ -881,7 +882,8 @@ static bool ceph_msg_data_bio_advance(struct ceph_msg_data_cursor *cursor,
> return false; /* no more data */
> }
>
> - if (!bytes || (it->iter.bi_size && it->iter.bi_bvec_done))
> + if (!bytes || (it->iter.bi_size && it->iter.bi_bvec_done &&
> + page == bio_iter_page(it->bio, it->iter)))
> return false; /* more bytes to process in this segment */
>
> if (!it->iter.bi_size) {
> @@ -929,6 +931,7 @@ static bool ceph_msg_data_bvecs_advance(struct ceph_msg_data_cursor *cursor,
> size_t bytes)
> {
> struct bio_vec *bvecs = cursor->data->bvec_pos.bvecs;
> + struct page *page = bvec_iter_page(bvecs, cursor->bvec_iter);
>
> BUG_ON(bytes > cursor->resid);
> BUG_ON(bytes > bvec_iter_len(bvecs, cursor->bvec_iter));
> @@ -940,7 +943,8 @@ static bool ceph_msg_data_bvecs_advance(struct ceph_msg_data_cursor *cursor,
> return false; /* no more data */
> }
>
> - if (!bytes || cursor->bvec_iter.bi_bvec_done)
> + if (!bytes || (cursor->bvec_iter.bi_bvec_done &&
> + page == bvec_iter_page(bvecs, cursor->bvec_iter)))
> return false; /* more bytes to process in this segment */
>
> BUG_ON(cursor->last_piece);
Hi Sasha,
This shouldn't be needed. Multipage bvecs code is new in 5.1 (commit
07173c3ec276 ("block: enable multipage bvecs")), this commit just fixed
the fall out.
Thanks,
Ilya