LinuxLists.cc - [GIT PULL 1/3] ARM: dts: exynos: Changes for v5.2

2019-04-14 15:49:08

Subject: [GIT PULL 1/3] ARM: dts: exynos: Changes for v5.2

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-5.2

for you to fetch changes up to 8cc76b1c75722196fb3d7ffe67cbfeb721a7b0e3:

ARM: dts: exynos: Remove console argument from bootargs (2019-04-10 18:13:31 +0200)

----------------------------------------------------------------
Samsung DTS ARM changes for v5.2

1. Use proper ADC on Exynos4412.
2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
unused regulators, ADC and UHS-I SD card support. Beside that adjust
regulators to proper level and add always-on when needed.
3. Extend the Exynos5260: high speed I2C and proper external interrupts.
Also fix shared external interrupt line and use better PLL for MMC
clocks.
4. Fix audio recording (broken around v5.1) and microphone recording
(since v4.14) on Exynos5422 Odroid XU3 boards.
5. Minor cleanups (stdout-path and bootargs).

----------------------------------------------------------------
Benjamin Drung (1):
ARM: dts: exynos: Fix spelling mistake of EXYNOS5420

Krzysztof Kozlowski (13):
ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412
ARM: dts: exynos: Document regulator used by ADC on Odroid U3
ARM: dts: exynos: Use stdout path property on Arndale Octa board
ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board
ARM: dts: exynos: Add CPU cooling on Arndale Octa
ARM: dts: exynos: Order nodes alphabetically in Arndale Octa
ARM: dts: exynos: Enable ADC on Arndale Octa
ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa
ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
ARM: dts: exynos: Extend the eMMC node on Arndale Octa
ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa
ARM: dts: exynos: Use stdout-path property instead of console in bootargs
ARM: dts: exynos: Remove console argument from bootargs

Stuart Menefy (4):
ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260
ARM: dts: exynos: Add high speed I2C ports for Exynos5260
ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260

Sylwester Nawrocki (2):
ARM: dts: exynos: Fix audio routing on Odroid XU3
ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3

arch/arm/boot/dts/exynos4210-origen.dts | 4 +-
arch/arm/boot/dts/exynos4210-smdkv310.dts | 4 +-
arch/arm/boot/dts/exynos4210-trats.dts | 4 +-
arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +-
arch/arm/boot/dts/exynos4412-odroidu3.dts | 5 +
arch/arm/boot/dts/exynos4412-origen.dts | 3 +-
arch/arm/boot/dts/exynos4412-smdk4412.dts | 4 +-
arch/arm/boot/dts/exynos4412-trats2.dts | 3 +-
arch/arm/boot/dts/exynos4412.dtsi | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +-
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 16 +
arch/arm/boot/dts/exynos5260-xyref5260.dts | 2 +-
arch/arm/boot/dts/exynos5260.dtsi | 82 ++++-
arch/arm/boot/dts/exynos5410-smdk5410.dts | 2 +-
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 364 +++++++++++++++++++++-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +-
arch/arm/boot/dts/exynos5420.dtsi | 2 +-
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 5 +-
18 files changed, 477 insertions(+), 35 deletions(-)

2019-04-14 15:49:12

by Krzysztof Kozlowski

[permalink] [raw]

Subject: [GIT PULL 2/3] arm64: dts: exynos: Changes for v5.2

2019-04-14 15:49:18

by Krzysztof Kozlowski

[permalink] [raw]

Subject: [GIT PULL 3/3] ARM: samsung: Changes for v5.2

2019-04-28 20:20:31

by Olof Johansson

[permalink] [raw]

Subject: Re: [GIT PULL 1/3] ARM: dts: exynos: Changes for v5.2

On Sun, Apr 14, 2019 at 05:48:03PM +0200, Krzysztof Kozlowski wrote:
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-5.2
>
> for you to fetch changes up to 8cc76b1c75722196fb3d7ffe67cbfeb721a7b0e3:
>
> ARM: dts: exynos: Remove console argument from bootargs (2019-04-10 18:13:31 +0200)
>
> ----------------------------------------------------------------
> Samsung DTS ARM changes for v5.2
>
> 1. Use proper ADC on Exynos4412.
> 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
> unused regulators, ADC and UHS-I SD card support. Beside that adjust
> regulators to proper level and add always-on when needed.
> 3. Extend the Exynos5260: high speed I2C and proper external interrupts.
> Also fix shared external interrupt line and use better PLL for MMC
> clocks.
> 4. Fix audio recording (broken around v5.1) and microphone recording
> (since v4.14) on Exynos5422 Odroid XU3 boards.
> 5. Minor cleanups (stdout-path and bootargs).

Merged, thanks!

-Olof

2019-04-28 20:20:33

by Olof Johansson

[permalink] [raw]

Subject: Re: [GIT PULL 2/3] arm64: dts: exynos: Changes for v5.2

On Sun, Apr 14, 2019 at 05:48:04PM +0200, Krzysztof Kozlowski wrote:
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-5.2
>
> for you to fetch changes up to 77fc46976e0bfcd78d30fb4c9f0169752b4339c9:
>
> arm64: dts: exynos: Add SlimSSS to Exynos5433 (2019-03-20 19:29:57 +0100)
>
> ----------------------------------------------------------------
> Samsung DTS ARM64 changes for v5.2
>
> 1. Use proper clock rates for GSCALER module on TM2 boards.
> 2. Add clocks for local paths on DECON and GSCALER modules of
> Exynos5433.
> 3. Add Slim SecuritySubSystem to Exynos5433.

Merged, thanks!

-Olof

2019-04-29 06:54:39

by Krzysztof Kozlowski

[permalink] [raw]

Subject: Re: [GIT PULL 3/3] ARM: samsung: Changes for v5.2

On Sun, 14 Apr 2019 at 17:48, Krzysztof Kozlowski <[email protected]> wrote:
>
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
>
> for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
>
> ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
>
> ----------------------------------------------------------------
> Samsung mach/soc changes for v5.2
>
> 1. Cleanup in mach code.
> 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
> with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R
> on these Odroid boards (still other drivers might have some issues
> but mach code seems to be finished).
> 3. Require MCPM for Exynos542x boards because otherwise not all of cores
> will come online.
> 4. GPIO regulator cleanup on S3C6410 Craig.

Hi Olof and Arnd,

I see you pulled in DTS and DTS64 pull request. I think this one here
is still pending.

Best regards,
Krzysztof

>
> ----------------------------------------------------------------
> Charles Keepax (1):
> ARM: s3c64xx: Tidy up handling of regulator GPIO lookups
>
> Joonyoung Shim (1):
> ARM: exynos: Add CPU state management for Exynos542x under secure firmware
>
> Marek Szyprowski (5):
> ARM: exynos: Move Exynos542x CPU state reset to pm_prepare()
> ARM: exynos: Add Exynos SMC values for secure memory write
> ARM: exynos: Fix undefined instruction during Exynos5422 resume
> ARM: exynos: Fix infinite loops on CPU powerup failure
> ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs
>
> Wen Yang (1):
> ARM: exynos: Fix a leaked reference by adding missing of_node_put
>
> arch/arm/configs/exynos_defconfig | 1 -
> arch/arm/configs/multi_v7_defconfig | 1 -
> arch/arm/mach-exynos/Kconfig | 12 ++-----
> arch/arm/mach-exynos/Makefile | 2 +-
> arch/arm/mach-exynos/common.h | 1 +
> arch/arm/mach-exynos/exynos.c | 3 ++
> arch/arm/mach-exynos/firmware.c | 1 +
> arch/arm/mach-exynos/mcpm-exynos.c | 13 +++++++-
> arch/arm/mach-exynos/platsmp.c | 9 ++++-
> arch/arm/mach-exynos/smc.h | 7 ++++
> arch/arm/mach-exynos/suspend.c | 49 ++++++++++++++++++++++++----
> arch/arm/mach-s3c64xx/mach-crag6410-module.c | 14 ++++++--
> 12 files changed, 89 insertions(+), 24 deletions(-)

2019-04-29 06:56:56

by Olof Johansson

[permalink] [raw]

Subject: Re: [GIT PULL 3/3] ARM: samsung: Changes for v5.2

On Sun, Apr 14, 2019 at 05:48:05PM +0200, Krzysztof Kozlowski wrote:
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
>
> for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
>
> ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
>
> ----------------------------------------------------------------
> Samsung mach/soc changes for v5.2
>
> 1. Cleanup in mach code.
> 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
> with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R
> on these Odroid boards (still other drivers might have some issues
> but mach code seems to be finished).
> 3. Require MCPM for Exynos542x boards because otherwise not all of cores
> will come online.
> 4. GPIO regulator cleanup on S3C6410 Craig.

Merged, thanks.

-Olof

2019-04-29 07:12:56

by Olof Johansson

[permalink] [raw]

Subject: Re: [GIT PULL 3/3] ARM: samsung: Changes for v5.2

On Sun, Apr 28, 2019 at 11:53 PM Krzysztof Kozlowski <[email protected]> wrote:
>
> On Sun, 14 Apr 2019 at 17:48, Krzysztof Kozlowski <[email protected]> wrote:
> >
> >
> > The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> >
> > Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
> >
> > are available in the Git repository at:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
> >
> > for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
> >
> > ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
> >
> > ----------------------------------------------------------------
> > Samsung mach/soc changes for v5.2
> >
> > 1. Cleanup in mach code.
> > 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
> > with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R
> > on these Odroid boards (still other drivers might have some issues
> > but mach code seems to be finished).
> > 3. Require MCPM for Exynos542x boards because otherwise not all of cores
> > will come online.
> > 4. GPIO regulator cleanup on S3C6410 Craig.
>
> Hi Olof and Arnd,
>
> I see you pulled in DTS and DTS64 pull request. I think this one here
> is still pending.

Yeah, I don't always do them in order. It's easier to sweep all pull
requests of a certain type (i.e. DT, drivers, etc). I also ran out of
time and had to step away for a few hours.

Same thing now -- I'm done for the night but there's quite a few
remaining pull requests in the queue. I'll continue tomorrow.

-Olof