xhci_pci_setup() is assigned to hc_driver.reset;
xhci_run() is assigned to hc_driver.start();
xhci_stop() is assigned to hc_driver.stop().
xhci_pci_setup() calls xhci_gen_setup, which calls xhci_init(). And
xhci_init() calls xhci_mem_init() to allocate resources.
xhci_stop() calls xhci_mem_cleanup(), to release the resources allocated
in xhci_mem_init() (also namely xhci_pci_setup()).
xhci_run() can fail, because xhci_try_enable_msi() or
xhci_alloc_command() in this function can fail.
In drivers/usb/core/hcd.c:
retval = hcd->driver->reset(hcd);
if (retval < 0) {
......
goto err_hcd_driver_setup;
}
......
retval = hcd->driver->start(hcd);
if (retval < 0) {
......
goto err_hcd_driver_start;
}
.......
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
err_hcd_driver_start:
if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
free_irq(irqnum, hcd);
err_request_irq:
err_hcd_driver_setup:
err_set_rh_speed:
usb_put_invalidate_rhdev(hcd);
err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
err_register_bus:
hcd_buffer_destroy(hcd);
err_create_buf:
usb_phy_roothub_power_off(hcd->phy_roothub);
err_usb_phy_roothub_power_on:
usb_phy_roothub_exit(hcd->phy_roothub);
Thus, when hcd->driver->reset() succeeds and hcd->driver->start() fails,
hcd->driver->stop() is not called.
Namely, when xhci_pci_setup() successfully allocates resources, and
xhci_run() fails, xhci_stop() is not called to release the resources.
For this reason, resource leaks occur in this case.
The ehci driver, uhci driver and ohci driver do not have such bugs:
In the ehci driver, ehci_run() (namely hcd->driver->start()) never
fails.
In the uhci driver, all the resources are allocated in uhci_start
(namely hcd->driver->start()), and no resources are allocated in
uhci_pci_init() (namely hcd->driver->reset()).
In the ohci driver, ohci_setup() (namely hcd->driver->reset()) also
allocates resources. But when ohci_start() (namely hcd->driver->start())
is going to fail, ohci_stop() is directly called to release the
resources allocated by ohci_setup().
Referring to the ohci driver, to fix these resource leaks,
xhci_mem_cleanup() is called in error handling code of xhci_run(),
to release the allocated resources.
These bugs are found by a runtime fuzzing tool named FIZZER written by
us.
Signed-off-by: Jia-Ju Bai <[email protected]>
---
drivers/usb/host/xhci.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7fa58c99f126..d18893cf03cb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -651,8 +651,10 @@ int xhci_run(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run");
ret = xhci_try_enable_msi(hcd);
- if (ret)
+ if (ret) {
+ xhci_mem_cleanup(xhci);
return ret;
+ }
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp_64 &= ~ERST_PTR_MASK;
@@ -683,8 +685,10 @@ int xhci_run(struct usb_hcd *hcd)
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, GFP_KERNEL);
- if (!command)
+ if (!command) {
+ xhci_mem_cleanup(xhci);
return -ENOMEM;
+ }
ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
--
2.17.0