fix lenght to length
Signed-off-by: Weitao Hou <[email protected]>
---
Changes in v3:
- fix all other same typos with git grep
---
.../devicetree/bindings/usb/s3c2410-usb.txt | 2 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
kernel/sysctl.c | 18 +++++++++---------
sound/soc/qcom/qdsp6/q6asm.c | 2 +-
4 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
index e45b38ce2986..26c85afd0b53 100644
--- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
+++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
@@ -4,7 +4,7 @@ OHCI
Required properties:
- compatible: should be "samsung,s3c2410-ohci" for USB host controller
- - reg: address and lenght of the controller memory mapped region
+ - reg: address and length of the controller memory mapped region
- interrupts: interrupt number for the USB OHCI controller
- clocks: Should reference the bus and host clocks
- clock-names: Should contain two strings
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
index 6b89f7eab26c..e0f5e6202a27 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
@@ -53,7 +53,7 @@ int mt76x02u_skb_dma_info(struct sk_buff *skb, int port, u32 flags)
pad = round_up(skb->len, 4) + 4 - skb->len;
/* First packet of a A-MSDU burst keeps track of the whole burst
- * length, need to update lenght of it and the last packet.
+ * length, need to update length of it and the last packet.
*/
skb_walk_frags(skb, iter) {
last = iter;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 943c89178e3d..f78f725f225e 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -187,17 +187,17 @@ extern int no_unaligned_warning;
* enum sysctl_writes_mode - supported sysctl write modes
*
* @SYSCTL_WRITES_LEGACY: each write syscall must fully contain the sysctl value
- * to be written, and multiple writes on the same sysctl file descriptor
- * will rewrite the sysctl value, regardless of file position. No warning
- * is issued when the initial position is not 0.
+ * to be written, and multiple writes on the same sysctl file descriptor
+ * will rewrite the sysctl value, regardless of file position. No warning
+ * is issued when the initial position is not 0.
* @SYSCTL_WRITES_WARN: same as above but warn when the initial file position is
- * not 0.
+ * not 0.
* @SYSCTL_WRITES_STRICT: writes to numeric sysctl entries must always be at
- * file position 0 and the value must be fully contained in the buffer
- * sent to the write syscall. If dealing with strings respect the file
- * position, but restrict this to the max length of the buffer, anything
- * passed the max lenght will be ignored. Multiple writes will append
- * to the buffer.
+ * file position 0 and the value must be fully contained in the buffer
+ * sent to the write syscall. If dealing with strings respect the file
+ * position, but restrict this to the max length of the buffer, anything
+ * passed the max length will be ignored. Multiple writes will append
+ * to the buffer.
*
* These write modes control how current file position affects the behavior of
* updating sysctl values through the proc interface on each write.
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 4f85cb19a309..e8141a33a55e 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -1194,7 +1194,7 @@ EXPORT_SYMBOL_GPL(q6asm_open_read);
* q6asm_write_async() - non blocking write
*
* @ac: audio client pointer
- * @len: lenght in bytes
+ * @len: length in bytes
* @msw_ts: timestamp msw
* @lsw_ts: timestamp lsw
* @wflags: flags associated with write
--
2.18.0
On Tue, May 21, 2019 at 01:09:37PM +0800, Weitao Hou wrote:
> fix lenght to length
>
> Signed-off-by: Weitao Hou <[email protected]>
Acked-by: Kees Cook <[email protected]>
I've aimed this at akpm... Colin, who normally takes your spelling
fix patches? (It looks like your split them up normally? That seems
silly here...)
-Kees
> ---
> Changes in v3:
> - fix all other same typos with git grep
> ---
> .../devicetree/bindings/usb/s3c2410-usb.txt | 2 +-
> .../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
> kernel/sysctl.c | 18 +++++++++---------
> sound/soc/qcom/qdsp6/q6asm.c | 2 +-
> 4 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> index e45b38ce2986..26c85afd0b53 100644
> --- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> @@ -4,7 +4,7 @@ OHCI
>
> Required properties:
> - compatible: should be "samsung,s3c2410-ohci" for USB host controller
> - - reg: address and lenght of the controller memory mapped region
> + - reg: address and length of the controller memory mapped region
> - interrupts: interrupt number for the USB OHCI controller
> - clocks: Should reference the bus and host clocks
> - clock-names: Should contain two strings
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> index 6b89f7eab26c..e0f5e6202a27 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> @@ -53,7 +53,7 @@ int mt76x02u_skb_dma_info(struct sk_buff *skb, int port, u32 flags)
> pad = round_up(skb->len, 4) + 4 - skb->len;
>
> /* First packet of a A-MSDU burst keeps track of the whole burst
> - * length, need to update lenght of it and the last packet.
> + * length, need to update length of it and the last packet.
> */
> skb_walk_frags(skb, iter) {
> last = iter;
> diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> index 943c89178e3d..f78f725f225e 100644
> --- a/kernel/sysctl.c
> +++ b/kernel/sysctl.c
> @@ -187,17 +187,17 @@ extern int no_unaligned_warning;
> * enum sysctl_writes_mode - supported sysctl write modes
> *
> * @SYSCTL_WRITES_LEGACY: each write syscall must fully contain the sysctl value
> - * to be written, and multiple writes on the same sysctl file descriptor
> - * will rewrite the sysctl value, regardless of file position. No warning
> - * is issued when the initial position is not 0.
> + * to be written, and multiple writes on the same sysctl file descriptor
> + * will rewrite the sysctl value, regardless of file position. No warning
> + * is issued when the initial position is not 0.
> * @SYSCTL_WRITES_WARN: same as above but warn when the initial file position is
> - * not 0.
> + * not 0.
> * @SYSCTL_WRITES_STRICT: writes to numeric sysctl entries must always be at
> - * file position 0 and the value must be fully contained in the buffer
> - * sent to the write syscall. If dealing with strings respect the file
> - * position, but restrict this to the max length of the buffer, anything
> - * passed the max lenght will be ignored. Multiple writes will append
> - * to the buffer.
> + * file position 0 and the value must be fully contained in the buffer
> + * sent to the write syscall. If dealing with strings respect the file
> + * position, but restrict this to the max length of the buffer, anything
> + * passed the max length will be ignored. Multiple writes will append
> + * to the buffer.
> *
> * These write modes control how current file position affects the behavior of
> * updating sysctl values through the proc interface on each write.
> diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
> index 4f85cb19a309..e8141a33a55e 100644
> --- a/sound/soc/qcom/qdsp6/q6asm.c
> +++ b/sound/soc/qcom/qdsp6/q6asm.c
> @@ -1194,7 +1194,7 @@ EXPORT_SYMBOL_GPL(q6asm_open_read);
> * q6asm_write_async() - non blocking write
> *
> * @ac: audio client pointer
> - * @len: lenght in bytes
> + * @len: length in bytes
> * @msw_ts: timestamp msw
> * @lsw_ts: timestamp lsw
> * @wflags: flags associated with write
> --
> 2.18.0
>
--
Kees Cook