The mei driver went via multiple changes, update
the documentation and fix formatting.
Signed-off-by: Tomas Winkler <[email protected]>
---
Documentation/driver-api/mei/mei.rst | 96 ++++++++++++++++++----------
1 file changed, 61 insertions(+), 35 deletions(-)
diff --git a/Documentation/driver-api/mei/mei.rst b/Documentation/driver-api/mei/mei.rst
index c7f10a4b46ff..c800d8e5f422 100644
--- a/Documentation/driver-api/mei/mei.rst
+++ b/Documentation/driver-api/mei/mei.rst
@@ -5,34 +5,32 @@ Introduction
The Intel Management Engine (Intel ME) is an isolated and protected computing
resource (Co-processor) residing inside certain Intel chipsets. The Intel ME
-provides support for computer/IT management features. The feature set
-depends on the Intel chipset SKU.
+provides support for computer/IT management and security features.
+The actual feature set depends on the Intel chipset SKU.
The Intel Management Engine Interface (Intel MEI, previously known as HECI)
is the interface between the Host and Intel ME. This interface is exposed
-to the host as a PCI device. The Intel MEI Driver is in charge of the
-communication channel between a host application and the Intel ME feature.
+to the host as a PCI device, actually multiple PCI devices might be exposed.
+The Intel MEI Driver is in charge of the communication channel between
+a host application and the Intel ME features.
-Each Intel ME feature (Intel ME Client) is addressed by a GUID/UUID and
+Each Intel ME feature, or Intel ME Client is addressed by a unique GUID and
each client has its own protocol. The protocol is message-based with a
-header and payload up to 512 bytes.
+header and payload up to maximal number of bytes advertised by the client,
+upon connection.
Intel MEI Driver
================
-The driver exposes a misc device called /dev/mei.
+The driver exposes a character device with device nodes /dev/meiX.
An application maintains communication with an Intel ME feature while
-/dev/mei is open. The binding to a specific feature is performed by calling
-MEI_CONNECT_CLIENT_IOCTL, which passes the desired UUID.
+/dev/meiX is open. The binding to a specific feature is performed by calling
+:c:macro:`MEI_CONNECT_CLIENT_IOCTL`, which passes the desired GUID.
The number of instances of an Intel ME feature that can be opened
at the same time depends on the Intel ME feature, but most of the
features allow only a single instance.
-The Intel AMT Host Interface (Intel AMTHI) feature supports multiple
-simultaneous user connected applications. The Intel MEI driver
-handles this internally by maintaining request queues for the applications.
-
The driver is transparent to data that are passed between firmware feature
and host application.
@@ -40,6 +38,8 @@ Because some of the Intel ME features can change the system
configuration, the driver by default allows only a privileged
user to access it.
+The session is terminated calling :c:func:`close(int fd)`.
+
A code snippet for an application communicating with Intel AMTHI client:
.. code-block:: C
@@ -47,13 +47,13 @@ A code snippet for an application communicating with Intel AMTHI client:
struct mei_connect_client_data data;
fd = open(MEI_DEVICE);
- data.d.in_client_uuid = AMTHI_UUID;
+ data.d.in_client_uuid = AMTHI_GUID;
ioctl(fd, IOCTL_MEI_CONNECT_CLIENT, &data);
printf("Ver=%d, MaxLen=%ld\n",
- data.d.in_client_uuid.protocol_version,
- data.d.in_client_uuid.max_msg_length);
+ data.d.in_client_uuid.protocol_version,
+ data.d.in_client_uuid.max_msg_length);
[...]
@@ -67,60 +67,86 @@ A code snippet for an application communicating with Intel AMTHI client:
close(fd);
-IOCTLs
-======
+User space API
+
+IOCTLs:
+=======
The Intel MEI Driver supports the following IOCTL commands:
- IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client).
- usage:
- struct mei_connect_client_data clientData;
- ioctl(fd, IOCTL_MEI_CONNECT_CLIENT, &clientData);
+IOCTL_MEI_CONNECT_CLIENT
+-------------------------
+Connect to firmware Feature/Client.
+
+.. code-block:: none
+
+ Usage:
- inputs:
- mei_connect_client_data struct contain the following
- input field:
+ struct mei_connect_client_data client_data;
- in_client_uuid - UUID of the FW Feature that needs
+ ioctl(fd, IOCTL_MEI_CONNECT_CLIENT, &client_data);
+
+ Inputs:
+
+ struct mei_connect_client_data - contain the following
+ Input field:
+
+ in_client_uuid - GUID of the FW Feature that needs
to connect to.
- outputs:
+ Outputs:
out_client_properties - Client Properties: MTU and Protocol Version.
- error returns:
+ Error returns:
+
+ ENOTTY No such client (i.e. wrong GUID) or connection is not allowed.
EINVAL Wrong IOCTL Number
- ENODEV Device or Connection is not initialized or ready. (e.g. Wrong UUID)
+ ENODEV Device or Connection is not initialized or ready.
ENOMEM Unable to allocate memory to client internal data.
EFAULT Fatal Error (e.g. Unable to access user input data)
EBUSY Connection Already Open
+:Note:
max_msg_length (MTU) in client properties describes the maximum
data that can be sent or received. (e.g. if MTU=2K, can send
requests up to bytes 2k and received responses up to 2k bytes).
- IOCTL_MEI_NOTIFY_SET: enable or disable event notifications
+
+IOCTL_MEI_NOTIFY_SET
+---------------------
+Enable or disable event notifications.
+
+
+.. code-block:: none
Usage:
+
uint32_t enable;
+
ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable);
- Inputs:
+
uint32_t enable = 1;
or
uint32_t enable[disable] = 0;
Error returns:
+
+
EINVAL Wrong IOCTL Number
ENODEV Device is not initialized or the client not connected
ENOMEM Unable to allocate memory to client internal data.
EFAULT Fatal Error (e.g. Unable to access user input data)
EOPNOTSUPP if the device doesn't support the feature
+:Note:
The client must be connected in order to enable notification events
- IOCTL_MEI_NOTIFY_GET : retrieve event
+IOCTL_MEI_NOTIFY_GET
+--------------------
+Retrieve event
+
+.. code-block:: none
Usage:
uint32_t event;
@@ -137,7 +163,7 @@ The Intel MEI Driver supports the following IOCTL commands:
EFAULT Fatal Error (e.g. Unable to access user input data)
EOPNOTSUPP if the device doesn't support the feature
+:Note:
The client must be connected and event notification has to be enabled
in order to receive an event
--
2.20.1
On Mon, Jun 03, 2019 at 12:14:02PM +0300, Tomas Winkler wrote:
> The mei driver went via multiple changes, update
> the documentation and fix formatting.
>
> Signed-off-by: Tomas Winkler <[email protected]>
> ---
> Documentation/driver-api/mei/mei.rst | 96 ++++++++++++++++++----------
> 1 file changed, 61 insertions(+), 35 deletions(-)
This patch is corrupted and can not apply. Did you try to edit it by
hand after generating it?
Can you resend it alone?
thanks,
greg k-h
> -----Original Message-----
> From: Greg Kroah-Hartman [mailto:[email protected]]
> Sent: Thursday, June 06, 2019 16:17
> To: Winkler, Tomas <[email protected]>
> Cc: Usyskin, Alexander <[email protected]>; linux-
> [email protected]; Jonathan Corbet <[email protected]>; linux-
> [email protected]
> Subject: Re: [char-misc-next 3/7] mei: docs: update mei documentation
>
> On Mon, Jun 03, 2019 at 12:14:02PM +0300, Tomas Winkler wrote:
> > The mei driver went via multiple changes, update the documentation and
> > fix formatting.
> >
> > Signed-off-by: Tomas Winkler <[email protected]>
> > ---
> > Documentation/driver-api/mei/mei.rst | 96
> > ++++++++++++++++++----------
> > 1 file changed, 61 insertions(+), 35 deletions(-)
>
> This patch is corrupted and can not apply. Did you try to edit it by hand after
> generating it?
I have a script that strips some internal metadata, now I see it has some issues with 'Notes:' keywords.
I've checked sand only this patch is affected.
> Can you resend it alone?
On the way.
Thanks
Tomas