Add documentation for auo kd101n80-45na panel.
Signed-off-by: Jitao Shi <[email protected]>
---
.../display/panel/auo,kd101n80-45na.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
new file mode 100644
index 000000000000..7715cf703431
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
@@ -0,0 +1,34 @@
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,kd101n80-45na"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply:
+- avee-supply:
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "auo,kd101n80-45na";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
Add driver for AUO kd101n80-45na panel.
This panel supports the resolution 1200x1920, dsi video mode
and 4 lanes.
Signed-off-by: Jitao Shi <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-auo-kd101n80-45na.c | 352 ++++++++++++++++++
3 files changed, 363 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index e36dbb4df867..f5cd5af9ce42 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -272,4 +272,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
help
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
+
+config DRM_PANEL_AUO_KD101N80_45NA
+ tristate "AUO KD101N80_45NA 1200x1920 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to support for AUO KD101N80_45NA WUXGA PANEL
+ DSI Video Mode panel
+
endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 78e3dc376bdd..1056933bdf2e 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_AUO_KD101N80_45NA) += panel-auo-kd101n80-45na.o
diff --git a/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c b/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
new file mode 100644
index 000000000000..ab7bfc059e8a
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jitao Shi <[email protected]>
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct auo_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+
+ struct backlight_device *backlight;
+ struct regulator *pp1800;
+ struct regulator *avee;
+ struct regulator *avdd;
+ struct gpio_desc *enable_gpio;
+
+ bool prepared;
+ bool enabled;
+
+ const struct drm_display_mode *mode;
+};
+
+static inline struct auo_panel *to_auo_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct auo_panel, base);
+}
+
+static int auo_panel_init(struct auo_panel *auo)
+{
+ struct drm_panel *panel = &auo->base;
+ int err;
+
+ err = mipi_dsi_dcs_exit_sleep_mode(auo->dsi);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
+ err);
+ return err;
+ }
+
+ /* T3.1*/
+ msleep(120);
+
+ err = mipi_dsi_dcs_set_display_on(auo->dsi);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
+ err);
+ }
+ /* T3.1 + T3.2: > 200ms */
+ msleep(120);
+
+ return err;
+}
+
+static int auo_panel_off(struct auo_panel *auo)
+{
+ struct mipi_dsi_device *dsi = auo->dsi;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int auo_panel_disable(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+
+ if (!auo->enabled)
+ return 0;
+
+ backlight_disable(auo->backlight);
+
+ auo->enabled = false;
+
+ return 0;
+}
+
+static int auo_panel_unprepare(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+ int ret;
+
+ if (!auo->prepared)
+ return 0;
+
+ ret = auo_panel_off(auo);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+ return ret;
+ }
+
+ msleep(150);
+ regulator_disable(auo->avee);
+ regulator_disable(auo->avdd);
+ usleep_range(5000, 7000);
+ regulator_disable(auo->pp1800);
+ if (auo->enable_gpio)
+ gpiod_set_value(auo->enable_gpio, 0);
+
+ auo->prepared = false;
+
+ return 0;
+}
+
+static int auo_panel_prepare(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+ int ret;
+
+ if (auo->prepared)
+ return 0;
+
+ if (auo->enable_gpio) {
+ gpiod_set_value(auo->enable_gpio, 0);
+ usleep_range(1000, 1500);
+ }
+
+ ret = regulator_enable(auo->pp1800);
+ if (ret < 0)
+ return ret;
+ ret = regulator_enable(auo->avdd);
+ if (ret < 0)
+ goto poweroff1v8;
+ ret = regulator_enable(auo->avee);
+ if (ret < 0)
+ goto poweroffavdd;
+
+ if (auo->enable_gpio) {
+ gpiod_set_value(auo->enable_gpio, 1);
+ usleep_range(10000, 12000);
+ }
+
+ ret = auo_panel_init(auo);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ auo->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(auo->avee);
+poweroffavdd:
+ regulator_disable(auo->avdd);
+poweroff1v8:
+ usleep_range(5000, 7000);
+ regulator_disable(auo->pp1800);
+ if (auo->enable_gpio)
+ gpiod_set_value(auo->enable_gpio, 0);
+ return ret;
+}
+
+static int auo_panel_enable(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+ int ret;
+
+ if (auo->enabled)
+ return 0;
+
+ ret = backlight_enable(auo->backlight);
+ if (ret) {
+ DRM_DEV_ERROR(panel->drm->dev,
+ "Failed to enable backlight %d\n", ret);
+ return ret;
+ }
+
+ auo->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 157000,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 80,
+ .hsync_end = 1200 + 80 + 24,
+ .htotal = 1200 + 80 + 24 + 36,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 16,
+ .vsync_end = 1920 + 16 + 4,
+ .vtotal = 1920 + 16 + 4 + 16,
+ .vrefresh = 60,
+};
+
+static int auo_panel_get_modes(struct drm_panel *panel)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(panel->connector, mode);
+
+ panel->connector->display_info.width_mm = 135;
+ panel->connector->display_info.height_mm = 216;
+ panel->connector->display_info.bpc = 8;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs auo_panel_funcs = {
+ .disable = auo_panel_disable,
+ .unprepare = auo_panel_unprepare,
+ .prepare = auo_panel_prepare,
+ .enable = auo_panel_enable,
+ .get_modes = auo_panel_get_modes,
+};
+
+static int auo_panel_add(struct auo_panel *auo)
+{
+ struct device *dev = &auo->dsi->dev;
+
+ auo->avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(auo->avdd))
+ return PTR_ERR(auo->avdd);
+
+ auo->avee = devm_regulator_get(dev, "avee");
+ if (IS_ERR(auo->avee))
+ return PTR_ERR(auo->avee);
+
+ auo->pp1800 = devm_regulator_get(dev, "pp1800");
+ if (IS_ERR(auo->pp1800))
+ return PTR_ERR(auo->pp1800);
+
+ auo->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(auo->enable_gpio)) {
+ dev_err(dev, "cannot get reset-gpios %ld\n",
+ PTR_ERR(auo->enable_gpio));
+ auo->enable_gpio = NULL;
+ } else {
+ gpiod_set_value(auo->enable_gpio, 0);
+ }
+
+ auo->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(auo->backlight))
+ return PTR_ERR(auo->backlight);
+
+ drm_panel_init(&auo->base);
+ auo->base.funcs = &auo_panel_funcs;
+ auo->base.dev = &auo->dsi->dev;
+
+ return drm_panel_add(&auo->base);
+}
+
+static void auo_panel_del(struct auo_panel *auo)
+{
+ if (auo->base.dev)
+ drm_panel_remove(&auo->base);
+}
+
+static int auo_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo;
+ int ret;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM;
+
+ auo = devm_kzalloc(&dsi->dev, sizeof(*auo), GFP_KERNEL);
+ if (!auo)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, auo);
+
+ auo->dsi = dsi;
+
+ ret = auo_panel_add(auo);
+ if (ret < 0)
+ return ret;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int auo_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = auo_panel_disable(&auo->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ auo_panel_del(auo);
+
+ return 0;
+}
+
+static void auo_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
+
+ auo_panel_disable(&auo->base);
+}
+
+static const struct of_device_id auo_of_match[] = {
+ { .compatible = "auo,kd101n80-45na", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, auo_of_match);
+
+static struct mipi_dsi_driver auo_panel_driver = {
+ .driver = {
+ .name = "panel-auo-kd101n80-45na",
+ .of_match_table = auo_of_match,
+ },
+ .probe = auo_panel_probe,
+ .remove = auo_panel_remove,
+ .shutdown = auo_panel_shutdown,
+};
+module_mipi_dsi_driver(auo_panel_driver);
+
+MODULE_AUTHOR("Jitao Shi <[email protected]>");
+MODULE_DESCRIPTION("AUO kd101n80-45na wuxga (1200x1920) video mode panel driver");
+MODULE_LICENSE("GPL v2");
+
--
2.21.0
Hi Jitao.
Binding doc for this panel looks good.
With added description for avdd + avee it is:
Reviewed-by: Sam Ravnborg <[email protected]>
On Sat, Jun 08, 2019 at 07:23:41PM +0800, Jitao Shi wrote:
> Add documentation for auo kd101n80-45na panel.
>
> Signed-off-by: Jitao Shi <[email protected]>
> ---
> .../display/panel/auo,kd101n80-45na.txt | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
> new file mode 100644
> index 000000000000..7715cf703431
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
> @@ -0,0 +1,34 @@
> +AUO Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "auo,kd101n80-45na"
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply:
> +- avee-supply:
Descriptions are missing for the 2 x supply.
> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> + ...
> + panel@0 {
> + compatible = "auo,kd101n80-45na";
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + status = "okay";
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +};
> --
> 2.21.0
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Jitao.
Thanks for another panel driver.
The comments for the panel-boe-tv101wum-nl6 diver to extent
applies to this driver too.
Please address these and I will do a proper review of the next version.
I notice that error handlign is a little bit less in this driver.
consier what approch to use and see if you can align between these
drivers, and if in doubt use panel-simple as your role model.
Sam
On Sat, Jun 08, 2019 at 07:23:42PM +0800, Jitao Shi wrote:
> Add driver for AUO kd101n80-45na panel.
> This panel supports the resolution 1200x1920, dsi video mode
> and 4 lanes.
>
> Signed-off-by: Jitao Shi <[email protected]>
> ---
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-auo-kd101n80-45na.c | 352 ++++++++++++++++++
> 3 files changed, 363 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index e36dbb4df867..f5cd5af9ce42 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -272,4 +272,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
> help
> Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
> Video Mode panel
> +
> +config DRM_PANEL_AUO_KD101N80_45NA
> + tristate "AUO KD101N80_45NA 1200x1920 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to support for AUO KD101N80_45NA WUXGA PANEL
> + DSI Video Mode panel
> +
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 78e3dc376bdd..1056933bdf2e 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> +obj-$(CONFIG_DRM_PANEL_AUO_KD101N80_45NA) += panel-auo-kd101n80-45na.o
> diff --git a/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c b/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
> new file mode 100644
> index 000000000000..ab7bfc059e8a
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-auo-kd101n80-45na.c
> @@ -0,0 +1,352 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Jitao Shi <[email protected]>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct auo_panel {
> + struct drm_panel base;
> + struct mipi_dsi_device *dsi;
> +
> + struct backlight_device *backlight;
> + struct regulator *pp1800;
> + struct regulator *avee;
> + struct regulator *avdd;
> + struct gpio_desc *enable_gpio;
> +
> + bool prepared;
> + bool enabled;
> +
> + const struct drm_display_mode *mode;
> +};
> +
> +static inline struct auo_panel *to_auo_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct auo_panel, base);
> +}
> +
> +static int auo_panel_init(struct auo_panel *auo)
> +{
> + struct drm_panel *panel = &auo->base;
> + int err;
> +
> + err = mipi_dsi_dcs_exit_sleep_mode(auo->dsi);
> + if (err < 0) {
> + DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
> + err);
> + return err;
> + }
> +
> + /* T3.1*/
> + msleep(120);
> +
> + err = mipi_dsi_dcs_set_display_on(auo->dsi);
> + if (err < 0) {
> + DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
> + err);
> + }
> + /* T3.1 + T3.2: > 200ms */
> + msleep(120);
> +
> + return err;
> +}
> +
> +static int auo_panel_off(struct auo_panel *auo)
> +{
> + struct mipi_dsi_device *dsi = auo->dsi;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + return ret;
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int auo_panel_disable(struct drm_panel *panel)
> +{
> + struct auo_panel *auo = to_auo_panel(panel);
> +
> + if (!auo->enabled)
> + return 0;
> +
> + backlight_disable(auo->backlight);
> +
> + auo->enabled = false;
> +
> + return 0;
> +}
> +
> +static int auo_panel_unprepare(struct drm_panel *panel)
> +{
> + struct auo_panel *auo = to_auo_panel(panel);
> + int ret;
> +
> + if (!auo->prepared)
> + return 0;
> +
> + ret = auo_panel_off(auo);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to set panel off: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(150);
> + regulator_disable(auo->avee);
> + regulator_disable(auo->avdd);
> + usleep_range(5000, 7000);
> + regulator_disable(auo->pp1800);
> + if (auo->enable_gpio)
> + gpiod_set_value(auo->enable_gpio, 0);
> +
> + auo->prepared = false;
> +
> + return 0;
> +}
> +
> +static int auo_panel_prepare(struct drm_panel *panel)
> +{
> + struct auo_panel *auo = to_auo_panel(panel);
> + int ret;
> +
> + if (auo->prepared)
> + return 0;
> +
> + if (auo->enable_gpio) {
> + gpiod_set_value(auo->enable_gpio, 0);
> + usleep_range(1000, 1500);
> + }
> +
> + ret = regulator_enable(auo->pp1800);
> + if (ret < 0)
> + return ret;
> + ret = regulator_enable(auo->avdd);
> + if (ret < 0)
> + goto poweroff1v8;
> + ret = regulator_enable(auo->avee);
> + if (ret < 0)
> + goto poweroffavdd;
> +
> + if (auo->enable_gpio) {
> + gpiod_set_value(auo->enable_gpio, 1);
> + usleep_range(10000, 12000);
> + }
> +
> + ret = auo_panel_init(auo);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to init panel: %d\n", ret);
> + goto poweroff;
> + }
> +
> + auo->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + regulator_disable(auo->avee);
> +poweroffavdd:
> + regulator_disable(auo->avdd);
> +poweroff1v8:
> + usleep_range(5000, 7000);
> + regulator_disable(auo->pp1800);
> + if (auo->enable_gpio)
> + gpiod_set_value(auo->enable_gpio, 0);
> + return ret;
> +}
> +
> +static int auo_panel_enable(struct drm_panel *panel)
> +{
> + struct auo_panel *auo = to_auo_panel(panel);
> + int ret;
> +
> + if (auo->enabled)
> + return 0;
> +
> + ret = backlight_enable(auo->backlight);
> + if (ret) {
> + DRM_DEV_ERROR(panel->drm->dev,
> + "Failed to enable backlight %d\n", ret);
> + return ret;
> + }
> +
> + auo->enabled = true;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 157000,
> + .hdisplay = 1200,
> + .hsync_start = 1200 + 80,
> + .hsync_end = 1200 + 80 + 24,
> + .htotal = 1200 + 80 + 24 + 36,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 16,
> + .vsync_end = 1920 + 16 + 4,
> + .vtotal = 1920 + 16 + 4 + 16,
> + .vrefresh = 60,
> +};
> +
> +static int auo_panel_get_modes(struct drm_panel *panel)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(panel->connector, mode);
> +
> + panel->connector->display_info.width_mm = 135;
> + panel->connector->display_info.height_mm = 216;
> + panel->connector->display_info.bpc = 8;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs auo_panel_funcs = {
> + .disable = auo_panel_disable,
> + .unprepare = auo_panel_unprepare,
> + .prepare = auo_panel_prepare,
> + .enable = auo_panel_enable,
> + .get_modes = auo_panel_get_modes,
> +};
> +
> +static int auo_panel_add(struct auo_panel *auo)
> +{
> + struct device *dev = &auo->dsi->dev;
> +
> + auo->avdd = devm_regulator_get(dev, "avdd");
> + if (IS_ERR(auo->avdd))
> + return PTR_ERR(auo->avdd);
> +
> + auo->avee = devm_regulator_get(dev, "avee");
> + if (IS_ERR(auo->avee))
> + return PTR_ERR(auo->avee);
> +
> + auo->pp1800 = devm_regulator_get(dev, "pp1800");
> + if (IS_ERR(auo->pp1800))
> + return PTR_ERR(auo->pp1800);
> +
> + auo->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(auo->enable_gpio)) {
> + dev_err(dev, "cannot get reset-gpios %ld\n",
> + PTR_ERR(auo->enable_gpio));
> + auo->enable_gpio = NULL;
> + } else {
> + gpiod_set_value(auo->enable_gpio, 0);
> + }
> +
> + auo->backlight = devm_of_find_backlight(dev);
> + if (IS_ERR(auo->backlight))
> + return PTR_ERR(auo->backlight);
> +
> + drm_panel_init(&auo->base);
> + auo->base.funcs = &auo_panel_funcs;
> + auo->base.dev = &auo->dsi->dev;
> +
> + return drm_panel_add(&auo->base);
> +}
> +
> +static void auo_panel_del(struct auo_panel *auo)
> +{
> + if (auo->base.dev)
> + drm_panel_remove(&auo->base);
> +}
> +
> +static int auo_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct auo_panel *auo;
> + int ret;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_LPM;
> +
> + auo = devm_kzalloc(&dsi->dev, sizeof(*auo), GFP_KERNEL);
> + if (!auo)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, auo);
> +
> + auo->dsi = dsi;
> +
> + ret = auo_panel_add(auo);
> + if (ret < 0)
> + return ret;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int auo_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = auo_panel_disable(&auo->base);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> +
> + auo_panel_del(auo);
> +
> + return 0;
> +}
> +
> +static void auo_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
> +
> + auo_panel_disable(&auo->base);
> +}
> +
> +static const struct of_device_id auo_of_match[] = {
> + { .compatible = "auo,kd101n80-45na", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, auo_of_match);
> +
> +static struct mipi_dsi_driver auo_panel_driver = {
> + .driver = {
> + .name = "panel-auo-kd101n80-45na",
> + .of_match_table = auo_of_match,
> + },
> + .probe = auo_panel_probe,
> + .remove = auo_panel_remove,
> + .shutdown = auo_panel_shutdown,
> +};
> +module_mipi_dsi_driver(auo_panel_driver);
> +
> +MODULE_AUTHOR("Jitao Shi <[email protected]>");
> +MODULE_DESCRIPTION("AUO kd101n80-45na wuxga (1200x1920) video mode panel driver");
> +MODULE_LICENSE("GPL v2");
> +
> --
> 2.21.0
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel